Showing 1–35 of 35 results for author: Swift, D C

Shock Hugoniot of diamond from 3 to 80 TPa

Authors: Damian C. Swift, Andrea L. Kritcher, Amy Lazicki, James A. Hawreliak, Tilo Doeppner, Heather D. Whitley, Joseph Nilsen, Benjamin Bachmann, Michael MacDonald, Brian Maddox, Natalie Kostinski, Gilbert W. Collins, Siegfried Glenzer, Stephen D. Rothman, Dominik Kraus, Roger W. Falcone

Abstract: The principal Hugoniot of carbon, initially diamond, was measured from 3 to 80 TPa (30 to 800 million atmospheres), the highest pressure ever achieved, using radiography of spherically-converging shocks. The shocks were generated by ablation of a plastic coating by soft x-rays in a laser-heated hohlraum at the National Ignition Facility (NIF). Experiments were performed with low and high drive pow… ▽ More The principal Hugoniot of carbon, initially diamond, was measured from 3 to 80 TPa (30 to 800 million atmospheres), the highest pressure ever achieved, using radiography of spherically-converging shocks. The shocks were generated by ablation of a plastic coating by soft x-rays in a laser-heated hohlraum at the National Ignition Facility (NIF). Experiments were performed with low and high drive powers, spanning different but overlap** pressure ranges. The radius-time history of the shock, and the profile of mass density behind, were determined by profile-matching from a time-resolved x-ray radiograph across the diameter of the sphere. Above ~50 TPa, the heating induced by the shock was great enough to ionize a significant fraction of K-shell electrons, reducing the opacity to the 10.2 keV probe x-rays. The opacity and mass density were deduced simultaneously using the constraint that the total mass of the sample was constant. The Hugoniot and opacity were consistent with density functional theory calculations of the electronic states and equation of state (EOS), and varied significantly from theoretical Hugoniots based on Thomas-Fermi theory. Theoretical models used to predict the compressibility of diamond ablator experiments at the NIF, producing the highest neutron yields so far from inertial confinement fusion experiments, are qualitatively consistent with our EOS measurements but appear to overpredict the compressibility slightly. These measurements help to evaluate theoretical techniques and constrain wide-range EOS models applicable to white dwarf stars, which are the ultimate evolutionary form of at least 97% of stars in the galaxy. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: arXiv admin note: text overlap with arXiv:2203.08891

Report number: LLNL-JRNL-815773

Improved analysis of converging shock radiographs

Authors: Damian C. Swift, Andrea L. Kritcher, Amy Lazicki, Natalie Kostinski, Brian R. Maddox, Madison E. Martin, Tilo Doeppner, Joseph Nilsen, Heather D. Whitley

Abstract: We previously reported an experimental platform to induce a spherically-convergent shock in a sample using laser-driven ablation, probed with time-resolved x-ray radiography, and an analysis method to deduce states along the principal shock Hugoniot simultaneously with the x-ray opacity. We have now developed a modified method of analysis that is numerically better-conditioned and faster, and usua… ▽ More We previously reported an experimental platform to induce a spherically-convergent shock in a sample using laser-driven ablation, probed with time-resolved x-ray radiography, and an analysis method to deduce states along the principal shock Hugoniot simultaneously with the x-ray opacity. We have now developed a modified method of analysis that is numerically better-conditioned and faster, and usually provides a better representation of the radiograph with correspondingly lower uncertainties. The previous approach was based on optimizing parameters in a model of the density distribution as a function of radius and time, warped to follow loci such as the shock and the outside of the sample. The converging shock configuration can be described more efficiently in terms of the shocked density and sound speed, expressed as functions of the shock speed Studies of the Hugoniot from various theoretical equations of state (EOS) indicate that, in the typical range of states explored by these experiments, these functions can be described by low-order polynomials. Similarly, few-parameter functions were found suitable for representing the variation of x-ray opacity with shock pressure. This approach was found to perform better in most cases than an alternative method based on parameterization of the EOS. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Report number: LLNL-JRNL-832834

Development of slurry targets for high repetition-rate XFEL experiments

Authors: Raymond F. Smith, Vinay Rastogi, Amy E. Lazicki, Martin G. Gorman, Richard Briggs, Amy L. Coleman, Carol Davis, Saransh Singh, David McGonegle, Samantha M. Clarke, Travis Volz, Trevor Hutchinson, Christopher McGuire, Dayne E. Fratanduono, Damian C. Swift, Eric Folsom, Cynthia A. Bolme, Arianna E. Gleason, Federica Coppari, Hae Ja Lee, Bob Nagler, Eric Cunningham, Eduardo Granados, Phil Heimann, Richard G. Kraus , et al. (4 additional authors not shown)

Abstract: Combining an x-ray free electron laser (XFEL) with high power laser drivers enables the study of phase transitions, equation-of-state, grain growth, strength, and transformation pathways as a function of pressure to 100s GPa along different thermodynamic compression paths. Future high-repetition rate laser operation will enable data to be accumulated at >1 Hz which poses a number of experimental c… ▽ More Combining an x-ray free electron laser (XFEL) with high power laser drivers enables the study of phase transitions, equation-of-state, grain growth, strength, and transformation pathways as a function of pressure to 100s GPa along different thermodynamic compression paths. Future high-repetition rate laser operation will enable data to be accumulated at >1 Hz which poses a number of experimental challenges including the need to rapidly replenish the target. Here, we present a combined shock-compression and X-ray diffraction study on vol% epoxy(50)-crystalline grains(50) (slurry) targets, which can be fashioned into extruded ribbons for high repetition-rate operation. For shock-loaded NaCl-slurry samples, we observe pressure, density and temperature states within the embedded NaCl grains consistent with observations for shock-compressed single-crystal NaCl. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Comments: 12 pages, 9 figures

Dislocation-based strength model for high energy density conditions

Authors: Damian C. Swift, Kazem Alidoost, Ryan Austin, Thomas Lockard, Christine Wu, Sebastien Hamel, John E. Klepeis, Pedro Peralta

Abstract: We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperatur… ▽ More We derive a continuum-level plasticity model for polycrystalline materials in the high energy density regime, based on a single dislocation density and single mobility mechanism, with an evolution model for the dislocation density. The model is formulated explicitly in terms of quantities connected closely with equation of state (EOS) theory, in particular the shear modulus and Einstein temperature, which reduces the number of unconstrained parameters while increasing the range of applicability. The least constrained component is the Peierls barrier $E_P$, which is however accessible by atomistic simulations. We demonstrate an efficient method to estimate the variation of $E_P$ with compression, constrained to fit a single flow stress datum. The formulation for dislocation mobility accounts for some or possibly all of the stiffening at high strain rates usually attributed to phonon drag. The configurational energy of the dislocations is accounted for explicitly, giving a self-consistent calculation of the conversion of plastic work to heat. The configurational energy is predicted to contribute to the mean pressure, and may reach several percent in the terapascal range, which may be significant when inferring scalar EOS data from dynamic loading experiments. The bulk elastic strain energy also contributes to the pressure, but appears to be much smaller. Although inherently describing the plastic relaxation of elastic strain, the model can be manipulated to estimate the flow stress as a function of mass density, temperature, and strain rate, which is convenient to compare with other models and inferences from experiment. The deduced flow stress reproduces systematic trends observed in elastic waves and instability growth experiments, and makes testable predictions of trends versus material and crystal type over a wide range of pressure and strain rate. △ Less

Submitted 26 July, 2022; v1 submitted 12 October, 2021; originally announced October 2021.

Comments: Various corrections; updates and additions to references; response to referee comments

Report number: LLNL-JRNL-825656

Atom-in-jellium predictions of the shear modulus at high pressure

Authors: Damian C. Swift, Thomas Lockard, Sebastien Hamel, Christine J. Wu, Lorin X. Benedict, Philip A. Sterne

Abstract: Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambien… ▽ More Atom-in-jellium calculations of the Einstein frequency in condensed matter and of the equation of state were used to predict the variation of shear modulus from zero pressure to ~$10^7$ g/cm$^3$, for several elements relevant to white dwarf (WD) stars and other self-gravitating systems. This is by far the widest range reported electronic structure calculation of shear modulus, spanning from ambient through the one-component plasma to extreme relativistic conditions. The predictions were based on a relationship between Debye temperature and shear modulus which we assess to be accurate at the o(10%) level, and is the first known use of atom-in-jellium theory to calculate a shear modulus. We assessed the overall accuracy of the method by comparing with experimental measurements and more detailed electronic structure calculations at lower pressures. △ Less

Submitted 27 August, 2021; v1 submitted 25 May, 2021; originally announced May 2021.

Report number: LLNL-JRNL-816175

Journal ref: Phys. Rev. B 105, 024110 (2022)

Atom-in-jellium equations of state and melt curves in the white dwarf regime

Authors: Damian C. Swift, Thomas Lockard, Sebastien Hamel, Christine J. Wu, Lorin X. Benedict, Philip A. Sterne, Heather D. Whitley

Abstract: Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of… ▽ More Atom-in-jellium calculations of the electron states, and perturbative calculations of the Einstein frequency, were used to construct equations of state (EOS) from around $10^{-5}$ to $10^7$g/cm$^3$ and $10^{-4}$ to $10^{6}$eV for elements relevant to white dwarf (WD) stars. This is the widest range reported for self-consistent electronic shell structure calculations. Elements of the same ratio of atomic weight to atomic number were predicted to asymptote to the same $T=0$ isotherm, suggesting that, contrary to recent studies of the crystallization of WDs, the amount of gravitational energy that could be released by separation of oxygen and carbon is small. A generalized Lindemann criterion based on the amplitude of the ion-thermal oscillations calculated using atom-in-jellium theory, previously used to extrapolate melt curves for metals, was found to reproduce previous thermodynamic studies of the melt curve of the one component plasma with a choice of vibration amplitude consistent with low pressure results. For elements for which low pressure melting satisfies the same amplitude criterion, such as Al, this melt model thus gives a likely estimate of the melt curve over the full range of normal electronic matter; for the other elements, it provides a useful constraint on the melt locus. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Report number: LLNL-JRNL-791167

Nonideal Mixing Effects in Warm Dense Matter Studied with First-Principles Computer Simulations

Authors: Burkhard Militzer, Felipe Gonzalez-Cataldo, Shuai Zhang, Heather D. Whitley, Damian C. Swift, Marius Millot

Abstract: We study nonideal mixing effects in the regime of warm dense matter (WDM) by computing the shock Hugoniot curves of BN, MgO, and MgSiO_3. First, we derive these curves from the equations of state (EOS) of the fully interacting systems, which were obtained using a combination of path integral Monte Carlo calculations at high temperature and density functional molecular dynamics simulations at lower… ▽ More We study nonideal mixing effects in the regime of warm dense matter (WDM) by computing the shock Hugoniot curves of BN, MgO, and MgSiO_3. First, we derive these curves from the equations of state (EOS) of the fully interacting systems, which were obtained using a combination of path integral Monte Carlo calculations at high temperature and density functional molecular dynamics simulations at lower temperatures. We then use the ideal mixing approximation at constant pressure and temperature to rederive these Hugoniot curves from the EOS tables of the individual elements. We find that the linear mixing approximation works remarkably well at temperatures above ~2*10^5 K, where the shock compression ratio exceeds ~3.2. The shape of the Hugoniot curve of each compound is well reproduced. Regions of increased shock compression, that emerge because of the ionization of L and K shell electrons, are well represented and the maximum compression ratio on the Hugoniot curves is reproduced with high precision. Some deviations are seen near the onset of the L shell ionization regime, where ionization equilibrium in the fully interacting system cannot be well reproduced by the ideal mixing approximation. This approximation also breaks down at lower temperatures, where chemical bonds play an increasingly import role. However, the results imply that equilibrium properties of binary and ternary mixtures in the regime of WDM can be derived from the EOS tables of the individual elements. This significantly simplifies the characterization of binary and ternary mixtures in the WDM and plasma phases, which otherwise requires large numbers of more computationally expensive first-principles computer simulations. △ Less

Submitted 25 October, 2020; originally announced October 2020.

Comments: 7 figures, 19 pages, 130 citations

Journal ref: In production, Journal of Chemical Physics (2020)

Sensitivity of stellar physics to the equation of state

Authors: D. C. Swift, T. Lockard, M. Bethkenhagen, A. Kritcher, S. Hamel, D. Dearborn

Abstract: The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laborato… ▽ More The formation and evolution of stars depends on various physical aspects of stellar matter, including the equation of state (EOS) and transport properties. Although often dismissed as `ideal gas-like' and therefore simple, states occurring in stellar matter are dense plasmas, and the EOS has not been established precisely. EOS constructed using multi-physics approaches found necessary for laboratory studies of warm dense matter give significant variations in stellar regimes, and vary from the EOS commonly used in simulations of the formation and evolution of stars. We have investigated the sensitivity of such simulations to variations in the EOS, for sun-like and low-mass stars, and found a strong sensitivity of the lifetime of the Sun and of the lower luminosity limit for red dwarfs. We also found a significant sensitivity in the lower mass limit for red dwarfs. Simulations of this type are also used for other purposes in astrophysics, including the interpretation of absolute magnitude as mass, the conversion of inferred mass distribution to the initial mass function using predicted lifetimes, simulations of star formation from nebulae, simulations of galactic evolution, and the baryon census used to bound the exotic contribution to dark matter. Although many of the sensitivities of stellar physics to the EOS are large, some of the inferred astrophysical quantities are also constrained by independent measurements, although the constraints may be indirect and non-trivial. However, it may be possible to use such measurements to constrain the EOS more than presently possible by established plasma theory. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Comparison of ablators for the polar direct drive exploding pusher platform

Authors: Heather D. Whitley, G. Elijah Kemp, Charles Yeamans, Zachary Walters, Brent E. Blue, Warren Garbett, Marilyn Schneider, R. Stephen Craxton, Emma M. Garcia, Patrick W. McKenty, Maria Gatu-Johnson, Kyle Caspersen, John I. Castor, Markus Däne, C. Leland Ellison, James Gaffney, Frank R. Graziani, John Klepeis, Natalie Kostinski, Andrea Kritcher, Brandon Lahmann, Amy E. Lazicki, Hai P. Le, Richard A. London, Brian Maddox , et al. (14 additional authors not shown)

Abstract: We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. Th… ▽ More We examine the performance of pure boron, boron carbide, high density carbon, and boron nitride ablators in the polar direct drive exploding pusher (PDXP) platform. The platform uses the polar direct drive configuration at the National Ignition Facility to drive high ion temperatures in a room temperature capsule and has potential applications for plasma physics studies and as a neutron source. The higher tensile strength of these materials compared to plastic enables a thinner ablator to support higher gas pressures, which could help optimize its performance for plasma physics experiments, while ablators containing boron enable the possiblity of collecting addtional data to constrain models of the platform. Applying recently developed and experimentally validated equation of state models for the boron materials, we examine the performance of these materials as ablators in 2D simulations, with particular focus on changes to the ablator and gas areal density, as well as the predicted symmetry of the inherently 2D implosion. △ Less

Submitted 30 December, 2020; v1 submitted 28 June, 2020; originally announced June 2020.

Report number: LLNL-JRNL-803851

Simultaneous compression and opacity data from time-series radiography with a Lagrangian marker

Authors: Damian C. Swift, Andrea L. Kritcher, James A. Hawreliak, James Gaffney, Amy Lazicki, Andrew MacPhee, Benjamin Bachmann, Tilo Doeppner, Joseph Nilsen, Heather D. Whitley, Gilbert W. Collins, Siegfried Glenzer, Stephen D. Rothman, Dominik Kraus, Roger W. Falcone

Abstract: Time-resolved radiography can be used to obtain absolute shock Hugoniot states by simultaneously measuring at least two mechanical parameters of the shock, and this technique is particularly suitable for one-dimensional converging shocks where a single experiment probes a range of pressures as the converging shock strengthens. However, at sufficiently high pressures, the shocked material becomes h… ▽ More Time-resolved radiography can be used to obtain absolute shock Hugoniot states by simultaneously measuring at least two mechanical parameters of the shock, and this technique is particularly suitable for one-dimensional converging shocks where a single experiment probes a range of pressures as the converging shock strengthens. However, at sufficiently high pressures, the shocked material becomes hot enough that the x-ray opacity falls significantly. If the system includes a Lagrangian marker, such that the mass within the marker is known, this additional information can be used to constrain the opacity as well as the Hugoniot state. In the limit that the opacity changes only on shock heating, and not significantly on subsequent isentropic compression, the opacity of shocked material can be determined uniquely. More generally, it is necessary to assume the form of the variation of opacity with isentropic compression, or to introduce multiple marker layers. Alternatively, assuming either the equation of state or the opacity, the presence of a marker layer in such experiments enables the non-assumed property to be deduced more accurately than from the radiographic density reconstruction alone. An example analysis is shown for measurements of a converging shock wave in polystyrene, at the National Ignition Facility. △ Less

Submitted 15 October, 2020; v1 submitted 23 June, 2020; originally announced June 2020.

Report number: LLNL-JRNL-805296

Journal ref: Rev. Sci. Instrum. 92, 063514 (2021)

Equation of state and strength of diamond in high pressure ramp loading

Authors: Damian C. Swift, Olivier Heuze, Amy Lazicki, Sebastien Hamel, Lorin X. Benedict, Raymond F. Smith, James M. McNaney, Graeme J. Ackland

Abstract: Diamond is used extensively as a component in high energy density experiments, but existing equation of state (EOS) models do not capture its observed response to dynamic loading. In particular, in contrast with first principles theoretical EOS models, no solid-solid phase changes have been detected, and no general-purpose EOS models match the measured ambient isotherm. We have performed density f… ▽ More Diamond is used extensively as a component in high energy density experiments, but existing equation of state (EOS) models do not capture its observed response to dynamic loading. In particular, in contrast with first principles theoretical EOS models, no solid-solid phase changes have been detected, and no general-purpose EOS models match the measured ambient isotherm. We have performed density functional theory (DFT) calculations of the diamond phase to ~10TPa, well beyond its predicted range of thermodynamic stability, and used these results as the basis of a Mie-Greuneisen EOS. We also performed DFT calculations of the elastic moduli, and calibrated an algebraic elasticity model for use in simulations. We then estimated the flow stress of diamond by comparison with the stress-density relation measured experimentally in ramp-loading experiments. The resulting constitutive model allows us to place a constraint on the Taylor-Quinney factor (the fraction of plastic work converted to heat) from the observation that diamond does not melt on ramp compression. △ Less

Submitted 31 August, 2021; v1 submitted 6 April, 2020; originally announced April 2020.

Report number: LLNL-JRNL-800622

Journal ref: Phys. Rev. B 105, 014109 (2022)

Comment on J. Fernandez et al, "Requirements and sensitivity analysis for temporally- and spatially-resolved thermometry using neutron resonance spectroscopy," Rev. Sci. Instrum. 90, 094901 (2019)

Authors: Damian C. Swift, James M. McNaney

Abstract: The article by Fernandez et al argues that, because of advances made in laser-produced neutron pulses, it should now be possible to measure temperature in samples loaded to elevated pressures, by neutron resonance spectrometry with neutrons accelerated using a single sub-picosecond laser pulse in the 300J range. We point out that the configuration used for neutron source and detector would require… ▽ More The article by Fernandez et al argues that, because of advances made in laser-produced neutron pulses, it should now be possible to measure temperature in samples loaded to elevated pressures, by neutron resonance spectrometry with neutrons accelerated using a single sub-picosecond laser pulse in the 300J range. We point out that the configuration used for neutron source and detector would require an infeasibly large sample, potentially requiring tens of megajoules of laser energy to drive the sample. The laser-driven neutron technology is thus not yet mature enough to consider for new facilities, and the previously-demonstrated experiments at LANSCE still represent the only credible point design. We summarize some possible strategies for coupling brighter neutron sources with dynamic loads. △ Less

Submitted 20 January, 2020; originally announced January 2020.

Journal ref: Rev. Sci. Instrum.92, 037101 (2021)

Equations of state for ruthenium and rhodium

Authors: Damian C. Swift, Thomas Lockard, Olivier Heuze, Mungo Frost, Siegfried Glenzer, Kenneth J. McClellan, Sebastien Hamel, John E. Klepeis, Lorin X. Benedict, Philip A. Sterne, Graeme J. Ackland

Abstract: Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous… ▽ More Ru and Rh are interesting cases for comparing equations of state (EOS), because most general purpose EOS are semi-empirical, relying heavily on shock data, and none has been reported for Ru. EOS were calculated for both elements using all-electron atom-in-jellium theory, and cold compression curves were calculated for the common crystal types using the multi-ion pseudopotential approach. Previous EOS constructed for these elements used Thomas-Fermi (TF) theory for the electronic behavior at high temperatures, which neglects electronic shell structure; the atom-in-jellium EOS exhibited pronounced features from the excitation of successive electron shells. Otherwise, the EOS matched surprisingly well, especially considering the lack of experimental data for Ru. The TF-based EOS for Ru may however be inaccurate in the multi-terapascal range needed for some high energy density experiments. The multi-ion calculations predicted that the hexagonal close-packed phase of Ru remains stable to at least 2.5 TPa and possibly 10 TPa, and that its c/a should gradually increase to the ideal value. A method was devised to estimate the variation in Debye temperature from the cold curve, and thus estimate the ion-thermal EOS without requiring relatively expensive dynamical force calculations, in a form convenient for adjusting EOS or phase boundaries. The Debye temperature estimated in this way was similar to the result from atom-in-jellium calculations. We also predict the high-pressure melt loci of both elements. △ Less

Submitted 11 September, 2019; originally announced September 2019.

Report number: LLNL-JRNL-780237

Atom-in-jellium equations of state for cryogenic liquids

Authors: Thomas Lockard, Marius Millot, Burkhard Militzer, Sebastien Hamel, Lorin X. Benedict, Philip A. Sterne, Damian C. Swift

Abstract: Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liqui… ▽ More Equations of state (EOS) calculated from a computationally efficient atom-in-jellium treatment of the electronic structure have recently been shown to be consistent with more rigorous path integral Monte Carlo (PIMC) and quantum molecular dynamics (QMD) simulations of metals in the warm dense matter regime. Here we apply the atom-in-jellium model to predict wide-ranging EOS for the cryogenic liquid elements nitrogen, oxygen, and fluorine. The principal Hugoniots for these substances were surprisingly consistent with available shock data and Thomas-Fermi (TF) EOS for very high pressures, and exhibited systematic variations from TF associated with shell ionization effects, in good agreement with PIMC, though deviating from QMD and experiment in the molecular regime. The new EOS are accurate much higher in pressure than previous widely-used models for nitrogen and oxygen in particular, and should allow much more accurate predictions for oxides and nitrides in the liquid, vapor, and plasma regime, where these have previously been constructed as mixtures containing the older EOS. △ Less

Submitted 16 October, 2020; v1 submitted 22 June, 2019; originally announced June 2019.

Report number: LLNL-JRNL-776203

High pressure melt locus of iron from atom-in-jellium calculations

Authors: Damian C. Swift, Thomas Lockard, Raymond F. Smith, Christine J. Wu, Lorin X. Benedict

Abstract: Although usually considered as a technique for predicting electron states in dense plasmas, atom-in-jellium calculations can be used to predict the mean displacement of the ion from its equilibrium position in colder matter, as a function of compression and temperature. The Lindemann criterion of a critical displacement for melting can then be employed to predict the melt locus, normalizing for in… ▽ More Although usually considered as a technique for predicting electron states in dense plasmas, atom-in-jellium calculations can be used to predict the mean displacement of the ion from its equilibrium position in colder matter, as a function of compression and temperature. The Lindemann criterion of a critical displacement for melting can then be employed to predict the melt locus, normalizing for instance to the observed melt temperature or to more direct simulations such as molecular dynamics (MD). This approach reproduces the high pressure melting behavior of Al as calculated using the Lindemann model and thermal vibrations in the solid. Applied to Fe, we find that it reproduces the limited-range melt locus of a multiphase equation of state (EOS) and the results of ab initio MD simulations, and agrees less well with a Lindemann construction using an older EOS. The resulting melt locus lies significantly above the older melt locus for pressures above 1.5\,TPa, but is closer to recent ab initio MD results and extrapolations of an analytic fit to them. This study confirms the importance of core freezing in massive exoplanets, predicting that a slightly smaller range of exoplanets than previously assessed would be likely to exhibit dynamo generation of magnetic fields by convection in the liquid portion of the core. △ Less

Submitted 11 June, 2019; originally announced June 2019.

Report number: LLNL-JRNL-769881

Journal ref: Phys. Rev. Research 2, 023034 (2020)

High temperature ion-thermal behavior from average-atom calculations

Authors: Damian C. Swift, Mandy Bethkenhagen, Alfredo A. Correa, Thomas Lockard, Sebastien Hamel, Lorin X. Benedict, Philip A. Sterne, Bard I. Bennett

Abstract: Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functio… ▽ More Atom-in-jellium calculations of the Einstein frequency were used to calculate the mean displacement of an ion over a wide range of compression and temperature. Expressed as a fraction of the Wigner-Seitz radius, the displacement is a measure of the asymptotic freedom of the ion at high temperature, and thus of the change in heat capacity from 6 to 3 quadratic degrees of freedom per atom. A functional form for free energy was proposed based on the Maxwell-Boltzmann distribution as a correction to the Debye free energy, with a single free parameter representing the effective density of potential modes to be saturated. This parameter was investigated using molecular dynamics simulations, and found to be ~0.2 per atom. In this way, the ion-thermal contribution can be calculated for a wide-range equation of state (EOS) without requiring a large number of molecular dynamics simulations. Example calculations were performed for carbon, including the sensitivity of key EOS loci to ionic freedom. △ Less

Submitted 21 May, 2019; originally announced May 2019.

Report number: LLNL-JRNL-768634

Journal ref: Phys. Rev. E 101, 053201 (2020)

Computationally efficient optimization of radiation drives

Authors: Damian C. Swift, George B. Zimmerman

Abstract: For many applications of pulsed radiation, the time-history of the radiation intensity must be optimized to induce a desired time-history of conditions. This optimization is normally performed using multi-physics simulations of the system. The pulse shape is parametrized, and multiple simulations are performed in which the parameters are adjusted until the desired response is induced. These simula… ▽ More For many applications of pulsed radiation, the time-history of the radiation intensity must be optimized to induce a desired time-history of conditions. This optimization is normally performed using multi-physics simulations of the system. The pulse shape is parametrized, and multiple simulations are performed in which the parameters are adjusted until the desired response is induced. These simulations are often computationally intensive, and the optimization by iteration of parameters in forward simulations is then expensive and slow. In many cases, the desired response can be expressed such that an instantaneous difference between the actual and desired response can be calculated. In principle, a computer program used to perform the forward simulation could be modified to adjust the instantaneous radiation drive automaticaly until the desired instantaneous response is achieved. Unfortunately, such modifications may be impracticable in a complicated multi-physics program. However, the computational time increment in such simulations is generally much shorter than the time scale of changes in the desired response. It is much more practicable to adjust the radiation source so that the response tends toward the desired value at later times. This relaxed in-situ optimization method can give an adequate design for a pulse shape in a single forward simulation, giving a typical gain in computational efficiency of tens to thousands. This approach was demonstrated for the design of laser pulse shapes to induce ramp loading to high pressure in target assemblies incorporating ablators of significantly different mechanical impedance than the sample, requiring complicated pulse sha**. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Report number: LLNL-JRNL-769474

Atom-in-jellium equations of state in the high energy density regime

Authors: Damian C. Swift, Thomas Lockard, Richard G. Kraus, Lorin X. Benedict, Philip A. Sterne, Mandy Bethkenhagen, Sebastien Hamel, Bard I. Bennett

Abstract: Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS… ▽ More Recent path-integral Monte Carlo and quantum molecular dynamics simulations have shown that computationally efficient average-atom models can predict thermodynamic states in warm dense matter to within a few percent. One such atom-in-jellium model has typically been used to predict the electron-thermal behavior only, although it was previously developed to predict the entire equation of state (EOS). We report completely atom-in-jellium EOS calculations for Be, Al, Si, Fe, and Mo, as elements representative of a range of atomic number and low-pressure electronic structure. Comparing the more recent method of pseudo-atom molecular dynamics, atom-in-jellium results were similar: sometimes less accurate, sometimes more. All these techniques exhibited pronounced effects of electronic shell structure in the shock Hugoniot which are not captured by Thomas-Fermi based EOS. These results demonstrate the value of a hierarchical approach to EOS construction, using average-atom techniques with shell structure to populate a wide-range EOS surface efficiently, complemented by more rigorous 3D multi-atom calculations to validate and adjust the EOS. △ Less

Submitted 1 March, 2019; originally announced March 2019.

Report number: LLNL-JRNL-752373

Journal ref: Phys. Rev. E 99, 063210 (2019)

Non-Iterative Characteristics Analysis for Ramp Loading with a Window

Authors: Damian C. Swift, Dayne E. Fratanduono, Evan A. Dowling, Richard G. Kraus

Abstract: Ramp compression experiment are used to deduce the relation between compression and normal stress in a material, by measuring how a compression wave evolves as it propagates through different thicknesses of the sample material. The compression wave is generally measured by Doppler velocimetry from a surface that can be observed with optical or near-optical photons. For high-pressure ramp loading,… ▽ More Ramp compression experiment are used to deduce the relation between compression and normal stress in a material, by measuring how a compression wave evolves as it propagates through different thicknesses of the sample material. The compression wave is generally measured by Doppler velocimetry from a surface that can be observed with optical or near-optical photons. For high-pressure ramp loading, the reflectivity of a free surface often decreases as it is accelerated by the ramp wave, and window materials transparent to the probing photons are used to keep the surface flatter and preserve its reflectivity. We previously described a method of analyzing ramp-wave data measured at the free surface which did not require numerical iteration. However, this method breaks down when the pressure at the surface changes and hence cannot be used for data taken with a finite-impedance window. We have now generalized this non-iterative analysis method to apply to measurements taken through a window. Free surfaces can be treated seamlessly, and the need for sampling at uniform intervals of velocity has been removed. These calculations require interpolation of partially-released states using the partially-constructed stress-compression relation, making them slower than the previous free-surface scheme, but they are still much more robust and fast than iterative analysis. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: arXiv admin note: text overlap with arXiv:1810.00929

Report number: LLNL-JRNL-767557

Non-Iterative Characteristics Analysis for High-Pressure Ramp Loading

Authors: Damian C. Swift, Dayne E. Fratanduono, Richard G. Kraus, Evan A. Dowling

Abstract: In the canonical ramp compression experiment, a smoothly-increasing load is applied to the surface of the sample, and the particle velocity history is measured at two or more different distances into the sample, at interfaces where the surface of the sample can be probed. The velocity histories are used to deduce a stress-density relation, usually using iterative Lagrangian analysis to account for… ▽ More In the canonical ramp compression experiment, a smoothly-increasing load is applied to the surface of the sample, and the particle velocity history is measured at two or more different distances into the sample, at interfaces where the surface of the sample can be probed. The velocity histories are used to deduce a stress-density relation, usually using iterative Lagrangian analysis to account for the perturbing effect of the impedance mismatch at the interface. In that technique, a stress- density relation is assumed in order to correct for the perturbation, and is adjusted until it becomes consistent with the deduced stress-density relation. This process is subject to the usual difficulties of nonlinear optimization, such as the existence of local minima (sensitivity to the initial guess), possible failure to converge, and relatively large computational effort. We show that, by considering the interaction of successive characteristics reaching the interfaces, the stress-density relation can be deduced directly by recursion rather than iteration. This calculation is orders of magnitude faster than iterative analysis, and does not require an initial guess. Direct recursion may be less suitable for very noisy data, but it was robust when applied to trial data. The stress-density relation deduced was identical to the result from iterative Lagrangian analysis. △ Less

Submitted 1 October, 2018; originally announced October 2018.

Report number: LLNL-JRNL-704258

Journal ref: Rev. Sci. Instrum. 90, 093903 (2019)

Analysis of laser shock experiments on precompressed samples using a quartz reference and application to warm dense hydrogen and helium

Authors: Stephanie Brygoo, Marius Millot, Paul Loubeyre, Amy E. Lazicki, Sebastien Hamel, Tingting Qi, Peter M. Celliers, Federica Coppari, Jon H. Eggert, Dayne E. Fratanduono, Damien G. Hicks, J. Ryan Rygg, Raymond F. Smith, Damian C. Swift, Gilbert W. Collins, Raymond Jeanloz

Abstract: Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high 10000-100000K temperatures. We describe here a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference f… ▽ More Megabar (1 Mbar = 100 GPa) laser shocks on precompressed samples allow reaching unprecedented high densities and moderately high 10000-100000K temperatures. We describe here a complete analysis framework for the velocimetry (VISAR) and pyrometry (SOP) data produced in these experiments. Since the precompression increases the initial density of both the sample of interest and the quartz reference for pressure-density, reflectivity and temperature measurements, we describe analytical corrections based on available experimental data on warm dense silica and density-functional-theory based molecular dynamics computer simulations. Using our improved analysis framework we report a re-analysis of previously published data on warm dense hydrogen and helium, compare the newly inferred pressure, density and temperature data with most advanced equation of state models and provide updated reflectivity values. △ Less

Submitted 12 October, 2015; originally announced October 2015.

Comments: 13 pages, 16 figures, 4 tables

Journal ref: J. Appl. Phys. 118, 195901 (2015)

Mass-Radius Relationships for Exoplanets II: Grueneisen Equation of State for Ammonia

Authors: Damian C. Swift

Abstract: We describe a mechanical equation of state for NH3, based on shock wave measurements for liquid ammonia. The shock measurements, for an initial temperature of 203 K, extended to 1.54 g/cc and 38.6 GPa. The shock and particle speeds were fitted well with a straight line, so extrapolations to higher compressions are numerically stable, but the accuracy is undetermined outside the range of the data.… ▽ More We describe a mechanical equation of state for NH3, based on shock wave measurements for liquid ammonia. The shock measurements, for an initial temperature of 203 K, extended to 1.54 g/cc and 38.6 GPa. The shock and particle speeds were fitted well with a straight line, so extrapolations to higher compressions are numerically stable, but the accuracy is undetermined outside the range of the data. The isentrope through the same initial state was estimated, along with its sensitivity to the Grueneisen parameter. Mass-radius relations were calculated for self-gravitating bodies of pure ammonia, and for differentiated ammonia-rock bodies. The relations were insensitive to variations in the Grueneisen parameter, indicating that they should be accurate for studies of planetary structure. △ Less

Submitted 13 October, 2011; originally announced October 2011.

Report number: LLNL-JRNL-505357

Sensitivity of rocky planet structures to the equation of state

Authors: Damian C. Swift

Abstract: Structures were calculated for Mercury, Venus, Earth, the Moon, and Mars, using a core-mantle model and adjusting the core radius to reproduce the observed mass and diameter of each body. Structures were calculated using Fe and basalt equations of state of different degrees of sophistication for the core and mantle. The choice of equation of state had a significant effect on the inferred structu… ▽ More Structures were calculated for Mercury, Venus, Earth, the Moon, and Mars, using a core-mantle model and adjusting the core radius to reproduce the observed mass and diameter of each body. Structures were calculated using Fe and basalt equations of state of different degrees of sophistication for the core and mantle. The choice of equation of state had a significant effect on the inferred structure. For each structure, the moment of inertia ratio was calculated and compared with observed values. Linear Grueneisen equations of state fitted to limited portions of shock data reproduced the observed moments of inertia significantly better than did more detailed equations of state incorporating phase transitions, presumably reflecting the actual compositions of the bodies. The linear Grueneisen equations of state and corresponding structures seem however to be a reasonable starting point for comparative simulations of large-scale astrophysical impacts. △ Less

Submitted 23 August, 2009; originally announced August 2009.

Report number: LLNL-TR-414058

Approximate, analytic solutions of the Bethe equation for charged particle range

Authors: Damian C. Swift, James M. McNaney

Abstract: By either performing a Taylor expansion or making a polynomial approximation, the Bethe equation for charged particle stop** power in matter can be integrated analytically to obtain the range of charged particles in the continuous deceleration approximation. Ranges match reference data to the expected accuracy of the Bethe model. In the non-relativistic limit, the energy deposition rate was al… ▽ More By either performing a Taylor expansion or making a polynomial approximation, the Bethe equation for charged particle stop** power in matter can be integrated analytically to obtain the range of charged particles in the continuous deceleration approximation. Ranges match reference data to the expected accuracy of the Bethe model. In the non-relativistic limit, the energy deposition rate was also found analytically. The analytic relations can be used to complement and validate numerical solutions including more detailed physics. △ Less

Submitted 11 February, 2009; v1 submitted 26 January, 2009; originally announced January 2009.

Comments: Work performed in the process of develo** (p,n) neutron sources. It seems surprising that such solutions have not been found previously, but we have not so far found any reported. We would be grateful for comments from anyone more knowledgeable in the field. V2: More elegant scaling factors, several typos fixed

Report number: LLNL-JRNL-410093

Shock formation and the ideal shape of ramp compression waves

Authors: Damian C. Swift, Richard G. Kraus, Eric Loomis, Damien G. Hicks, James M. McNaney, Randall P. Johnson

Abstract: We derive expressions for shock formation based on the local curvature of the flow characteristics during dynamic compression. Given a specific ramp adiabat, calculated for instance from the equation of state for a substance, the ideal nonlinear shape for an applied ramp loading history can be determined. We discuss the region affected by lateral release, which can be presented in compact form f… ▽ More We derive expressions for shock formation based on the local curvature of the flow characteristics during dynamic compression. Given a specific ramp adiabat, calculated for instance from the equation of state for a substance, the ideal nonlinear shape for an applied ramp loading history can be determined. We discuss the region affected by lateral release, which can be presented in compact form for the ideal loading history. Example calculations are given for representative metals and plastic ablators. Continuum dynamics (hydrocode) simulations were in good agreement with the algebraic forms. Example applications are presented for several classes of laser-loading experiment, identifying conditions where shocks are desired but not formed, and where long duration ramps are desired. △ Less

Submitted 31 May, 2008; originally announced June 2008.

Report number: LLNL-JRNL-404275

Journal ref: Physical Review E, vol 78, 066115 (2008)

Crystal Plasticity for Dynamic Loading at High Pressures and Strains

Authors: Damian C. Swift, Eric N. Loomis, Pedro Peralta, Bassem El-Dasher

Abstract: A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher, elastic strains may reach o(10%), which may change the orientation of the slip systems significantly with respect to the stress field. Elastic strain rather… ▽ More A crystal plasticity theory was developed for use in simulations of dynamic loading at high pressures and strain rates. At pressures of the order of the bulk modulus, compressions o(100%) may be induced. At strain rates o(10^9)/s or higher, elastic strains may reach o(10%), which may change the orientation of the slip systems significantly with respect to the stress field. Elastic strain rather than stress was used in defining the local state, providing a more direct connection with electronic structure predictions and consistency with the treatment of compression in initial value problems in continuum dynamics. Plastic flow was treated through explicit slip systems, with flow on each system taken to occur by thermally-activated random jumps biased by the resolved stress. Compared with simple Arrhenius rates, the biased random jumps caused significant differences in plastic strain rate as a function of temperature and pressure, and provided a seamless transition to the ultimate theoretical strength of the material. The behavior of the theory was investigated for matter with approximate properties for Ta, demonstrating the importance of the high pressure, high strain rate contributions. △ Less

Submitted 10 April, 2008; v1 submitted 31 December, 2007; originally announced January 2008.

Comments: Revised per reviewer comments

Pyrometric Measurement of the Temperature of Shocked Molybdenum

Authors: Achim Seifter, Damian C. Swift

Abstract: Measurements of the temperature of Mo shocked to ~60 GPa and then released to ~28 GPa were previously attempted using high explosive driven flyer plates and pyrometry. Analysis of the radiance traces at different wavelengths indicates that the temporal evolution of the radiance can be explained by a contribution from the LiF window to the measured thermal radiation. Fitting the radiance traces w… ▽ More Measurements of the temperature of Mo shocked to ~60 GPa and then released to ~28 GPa were previously attempted using high explosive driven flyer plates and pyrometry. Analysis of the radiance traces at different wavelengths indicates that the temporal evolution of the radiance can be explained by a contribution from the LiF window to the measured thermal radiation. Fitting the radiance traces with a simple model, supported by continuum dynamics studies which were able to relate structures in the radiance history to hydrodynamic events in the experiment, the contribution of the window was obtained and hence the temperature of the Mo sample. The shock-and release temperature obtained in the Mo was 762+/-40K which is consistent with calculations taking the contribution of plastic work to the heating into account. The radiance obtained for the LiF window shows a non thermal distribution which can be described by a bulk temperature of 624+/-112K and hot spots (less than 0.5% in total volume) within the window at a temperature of about 2000K. △ Less

Submitted 7 December, 2007; originally announced December 2007.

Journal ref: Physical Review B, vol 77, 134104 (2008)

On the Properties of Plastic Ablators in Laser-Driven Material Dynamics Experiments

Authors: Damian C. Swift, Richard G. Kraus

Abstract: Radiation hydrodynamics simulations were used to study the effect of plastic ablators in laser-driven shock experiments. The sensitivity to composition and equation of state was found to be 5-10% in ablation pressure. As was found for metals, a laser pulse of constant irradiance gave a pressure history which decreased by several percent per nanosecond. The pressure history could be made more con… ▽ More Radiation hydrodynamics simulations were used to study the effect of plastic ablators in laser-driven shock experiments. The sensitivity to composition and equation of state was found to be 5-10% in ablation pressure. As was found for metals, a laser pulse of constant irradiance gave a pressure history which decreased by several percent per nanosecond. The pressure history could be made more constant by adjusting the irradiance history. The impedance mismatch with the sample gave an increase o(100%) in the pressure transmitted into the sample, for a reduction of several tens of percent in the duration of the peak load applied to the sample, and structured the release history by adding a release step to a pressure close to the ablation pressure. Algebraic relations were found between the laser pulse duration, the ablator thickness, and the duration of the peak pressure applied to the sample, involving quantities calculated from the equations of state of the ablator and sample using shock dynamics. △ Less

Submitted 4 June, 2008; v1 submitted 7 December, 2007; originally announced December 2007.

Comments: Typos fixed

Report number: UCRL-JRNL-236641

Journal ref: Physical Review E, vol 77, 066402 (2008)

Dynamic plasticity of beryllium in the inertial fuel fusion capsule regime

Authors: Damian C. Swift, Thomas E. Tierney, Sheng-Nian Luo, Roberta N. Mulford, George A. Kyrala, Randall P. Johnson, James A. Cobble, Daviid L. Tubbs, Nelson M. Hoffman

Abstract: The plastic response of beryllium was investigated during loading by laser-induced shock waves, using surface velocimetry and in-situ x-ray diffraction. Results from loading by thermal x-rays (hohlraum) were consistent with more extensive studies using laser ablation. Strong elastic waves were observed, up to ~1 km/s in free surface speed, with significant structure before the arrival of the pla… ▽ More The plastic response of beryllium was investigated during loading by laser-induced shock waves, using surface velocimetry and in-situ x-ray diffraction. Results from loading by thermal x-rays (hohlraum) were consistent with more extensive studies using laser ablation. Strong elastic waves were observed, up to ~1 km/s in free surface speed, with significant structure before the arrival of the plastic shock. The magnitude and shape of the precursor could be reproduced with a plasticity model based on dislocation dynamics. Changes in lattice spacing measured from the x-ray diffraction pattern gave a direct measurement of uniaxial compression in the elastic wave, triaxial flow from the decay of the precursor, and triaxial compression in the plastic shock; these were consistent with the velocity data. The dynamic strength behavior deduced from the laser experiments was used to help interpret surface velocity data around the onset of shock-induced melting. A model of heterogeneous mixtures is being extended to treat anisotropic components, and spall. △ Less

Submitted 22 November, 2007; v1 submitted 19 November, 2007; originally announced November 2007.

Report number: LA-UR-05-4739

X-ray diffraction from shock-loaded polycrystals

Authors: Damian C. Swift

Abstract: X-ray diffraction was demonstrated from shock-compressed polycrystalline metal on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25 to 125 microns thick. A second laser pulse was used to generate a plasma x-ray source by irradiation of a Ti foil. The x-ray source was collimated to produce a beam of controllable diameter, and the beam was dir… ▽ More X-ray diffraction was demonstrated from shock-compressed polycrystalline metal on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25 to 125 microns thick. A second laser pulse was used to generate a plasma x-ray source by irradiation of a Ti foil. The x-ray source was collimated to produce a beam of controllable diameter, and the beam was directed at the Be sample. X-rays were diffracted from the sample, and detected using films and x-ray streak cameras. The diffraction angle was observed to change with shock pressure. The diffraction angles were consistent with the uniaxial (elastic) and isotropic (plastic) compressions expected for the loading conditions used. Polycrystalline diffraction will be used to measure the response of the crystal lattice to high shock pressures and through phase changes. △ Less

Submitted 5 July, 2007; originally announced July 2007.

Report number: LA-UR-04-8534

Journal ref: Review of Scientific Instruments, vol 79, no 1, 013906 (2008)

The equation of state of solid nickel aluminide

Authors: Damian C. Swift, Dennis L. Paisley, Kenneth J. McClellan, Graeme J. Ackland

Abstract: The pressure-volume-temperature equation of state of the intermetallic compound NiAl was calculated theoretically, and compared with experimental measurements. Electron ground states were calculated for NiAl in the CsCl structure, using density functional theory, and were used to predict the cold compression curve and the density of phonon states. The Rose form of compression curve was found to… ▽ More The pressure-volume-temperature equation of state of the intermetallic compound NiAl was calculated theoretically, and compared with experimental measurements. Electron ground states were calculated for NiAl in the CsCl structure, using density functional theory, and were used to predict the cold compression curve and the density of phonon states. The Rose form of compression curve was found to reproduce the ab initio calculations well in compression but exhibited significant deviations in expansion. A thermodynamically-complete equation of state was constructed for NiAl. Shock waves were induced in crystals of NiAl by the impact of laser-launched Cu flyers and by launching NiAl flyers into transparent windows of known properties. The TRIDENT laser was used to accelerate the flyers to speeds between 100 and 600m/s. Point and line-imaging laser Doppler velocimetry was used to measure the acceleration of the flyer and the surface velocity history of the target. The velocity histories were used to deduce the stress state, and hence states on the principal Hugoniot and the flow stress. Flyers and targets were recovered from most experiments. The effect of elasticity and plastic flow in the sample and window was assessed. The ambient isotherm reproduced static compression data very well, and the predicted Hugoniot was consistent with shock compression data. △ Less

Submitted 30 June, 2007; originally announced July 2007.

Report number: LA-UR-05-6096

Journal ref: Physical Review B, vol 76, 134111 (2007)

Explanation for Anomalous Shock Temperatures Measured by Neutron Resonance Spectroscopy

Authors: Damian C. Swift, Achim Seifter, David B. Holtkamp, Vincent W. Yuan, David Bowman, David A. Clark

Abstract: Neutron resonance spectrometry (NRS) has been used to measure the temperature inside Mo samples during shock loading. The temperatures obtained were significantly higher than predicted assuming ideal hydrodynamic loading. The effect of plastic flow and non-ideal projectile behavior were assessed. Plastic flow was calculated self-consistently with the shock jump conditions: this is necessary for… ▽ More Neutron resonance spectrometry (NRS) has been used to measure the temperature inside Mo samples during shock loading. The temperatures obtained were significantly higher than predicted assuming ideal hydrodynamic loading. The effect of plastic flow and non-ideal projectile behavior were assessed. Plastic flow was calculated self-consistently with the shock jump conditions: this is necessary for a rigorous estimate of the locus of shock states accessible. Plastic flow was estimated to contribute a temperature rise of 53K compared with hydrodynamic flow. Simulations were performed of the operation of the explosively-driven projectile system used to induce the shock in the Mo sample. The simulations predicted that the projectile was significantly curved on impact, and still accelerating. The resulting spatial variations in load, including radial components of velocity, were predicted to increase the apparent temperature that would be deduced from the width of the neutron resonance by 160K. These corrections are sufficient to reconcile the apparent temperatures deduced using NRS with the accepted properties of Mo, in particular its equation of state. △ Less

Submitted 30 June, 2007; originally announced July 2007.

Comments: near-final version, waiting for final consent from an author

Report number: LA-UR-07-1981

Journal ref: Physical Review B, vol. 77, no. 9, 092102 (2008)

Shock and Release Temperatures in Molybdenum

Authors: Damian C. Swift, Achim Seifter, David B. Holtkamp, David A. Clark

Abstract: Shock and release temperatures in Mo were calculated, taking account of heating from plastic flow predicted using the Steinberg-Guinan model. Plastic flow was calculated self-consistently with the shock jump conditions: this is necessary for a rigorous estimate of the locus of shock states accessible. The temperatures obtained were significantly higher than predicted assuming ideal hydrodynamic… ▽ More Shock and release temperatures in Mo were calculated, taking account of heating from plastic flow predicted using the Steinberg-Guinan model. Plastic flow was calculated self-consistently with the shock jump conditions: this is necessary for a rigorous estimate of the locus of shock states accessible. The temperatures obtained were significantly higher than predicted assuming ideal hydrodynamic loading. The temperatures were compared with surface emission spectrometry measurements for Mo shocked to around 60GPa and then released into vacuum or into a LiF window. Shock loading was induced by the impact of a planar projectile, accelerated by high explosive or in a gas gun. Surface velocimetry showed an elastic wave at the start of release from the shocked state; the amplitude of the elastic wave matched the prediction to around 10%, indicating that the predicted flow stress in the shocked state was reasonable. The measured temperatures were consistent with the simulations, indicating that the fraction of plastic work converted to heat was in the range 70-100% for these loading conditions. △ Less

Submitted 13 April, 2007; originally announced April 2007.

Report number: LA-UR-07-1660

Journal ref: Physical Review B, vol 76, 054122 (2007)

Numerical solution of shock and ramp compression for general material properties

Authors: Damian C. Swift

Abstract: A general formulation was developed to represent material models for applications in dynamic loading. Numerical methods were devised to calculate response to shock and ramp compression, and ramp decompression, generalizing previous solutions for scalar equations of state. The numerical methods were found to be flexible and robust, and matched analytic results to a high accuracy. The basic ramp a… ▽ More A general formulation was developed to represent material models for applications in dynamic loading. Numerical methods were devised to calculate response to shock and ramp compression, and ramp decompression, generalizing previous solutions for scalar equations of state. The numerical methods were found to be flexible and robust, and matched analytic results to a high accuracy. The basic ramp and shock solution methods were coupled to solve for composite deformation paths, such as shock-induced impacts, and shock interactions with a planar interface between different materials. These calculations capture much of the physics of typical material dynamics experiments, without requiring spatially-resolving simulations. Example calculations were made of loading histories in metals, illustrating the effects of plastic work on the temperatures induced in quasi-isentropic and shock-release experiments, and the effect of a phase transition. △ Less

Submitted 1 July, 2008; v1 submitted 31 March, 2007; originally announced April 2007.

Comments: Minor corrections

Report number: LA-UR-07-2051, LLNL-JRNL-410358

Journal ref: Journal of Applied Physics, vol 104, 073536 (2008)

On High Explosive Launching of Projectiles for Shock Physics Experiments

Authors: Damian C. Swift, Charles A. Forest, David A. Clark, William T. Buttler, Mark Marr-Lyon, Paul Rightley

Abstract: The hydrodynamic operation of the `Forest Flyer' type of explosive launching system for shock physics projectiles was investigated in detail using one- and two-dimensional continuum dynamics simulations. The simulations were insensitive to uncertainties in the material properties, and reproduced measurements of the projectile. The most commonly-used variant, with an Al alloy case, was predicted… ▽ More The hydrodynamic operation of the `Forest Flyer' type of explosive launching system for shock physics projectiles was investigated in detail using one- and two-dimensional continuum dynamics simulations. The simulations were insensitive to uncertainties in the material properties, and reproduced measurements of the projectile. The most commonly-used variant, with an Al alloy case, was predicted to produce a slightly curved projectile, subjected to some shock heating, and likely exhibiting some porosity from tensile damage. The flatness can be improved by using a case of lower shock impedance, such as polymethyl methacrylate. High-impedance cases, including Al alloys but with denser materials improving the launching efficiency, can be used if designed according to the physics of oblique shock reflection. The tensile stress induced in the projectile depends on the relative thickness of the explosive, expansion gap, and projectile. The thinner the projectile with respect to the explosive, the smaller the tensile stress. If the explosive is initiated with a plane wave lens, the tensile stress is lower than for initiation with multiple detonators over a plane. The previous plane wave lens designs did however induce a tensile stress close to the spall strength of the projectile. The tensile stress can be reduced by changes in the component thicknesses. Experiments to verify the operation of explosively-launched projectiles should attempt to measure porosity induced in the projectile: arrival time measurements may be insensitive to porous regions caused by damaged or recollected material. △ Less

Submitted 28 February, 2007; originally announced February 2007.

Report number: LA-UR-07-1299

Journal ref: Review of Scientific Instruments, vol 78, no 6, 063904 (2007)