-
Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons
Authors:
Harry Levine,
Arbel Haim,
Jimmy S. C. Hung,
Nasser Alidoust,
Mahmoud Kalaee,
Laura DeLorenzo,
E. Alex Wollack,
Patricio Arrangoiz-Arriola,
Amirhossein Khalajhedayati,
Rohan Sanil,
Hesam Moradinejad,
Yotam Vaknin,
Aleksander Kubica,
David Hover,
Shahriar Aghaeimeibodi,
Joshua Ari Alcid,
Christopher Baek,
James Barnett,
Kaustubh Bawdekar,
Przemyslaw Bienias,
Hugh Carson,
Cliff Chen,
Li Chen,
Harut Chinkezian,
Eric M. Chisholm
, et al. (88 additional authors not shown)
Abstract:
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of…
▽ More
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.
△ Less
Submitted 20 March, 2024; v1 submitted 17 July, 2023;
originally announced July 2023.
-
Architectural considerations in the design of a third-generation superconducting quantum annealing processor
Authors:
Kelly Boothby,
Colin Enderud,
Trevor Lanting,
Reza Molavi,
Nicholas Tsai,
Mark H. Volkmann,
Fabio Altomare,
Mohammad H. Amin,
Michael Babcock,
Andrew J. Berkley,
Catia Baron Aznar,
Martin Boschnak,
Holly Christiani,
Sara Ejtemaee,
Bram Evert,
Matthew Gullen,
Markus Hager,
Richard Harris,
Emile Hoskinson,
Jeremy P. Hilton,
Kais Jooya,
Ann Huang,
Mark W. Johnson,
Andrew D. King,
Eric Ladizinsky
, et al. (24 additional authors not shown)
Abstract:
Early generations of superconducting quantum annealing processors have provided a valuable platform for studying the performance of a scalable quantum computing technology. These studies have directly informed our approach to the design of the next-generation processor. Our design priorities for this generation include an increase in per-qubit connectivity, a problem Hamiltonian energy scale simil…
▽ More
Early generations of superconducting quantum annealing processors have provided a valuable platform for studying the performance of a scalable quantum computing technology. These studies have directly informed our approach to the design of the next-generation processor. Our design priorities for this generation include an increase in per-qubit connectivity, a problem Hamiltonian energy scale similar to previous generations, reduced Hamiltonian specification errors, and an increase in the processor scale that also leaves programming and readout times fixed or reduced. Here we discuss the specific innovations that resulted in a processor architecture that satisfies these design priorities.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Scaling advantage in quantum simulation of geometrically frustrated magnets
Authors:
Andrew D. King,
Jack Raymond,
Trevor Lanting,
Sergei V. Isakov,
Masoud Mohseni,
Gabriel Poulin-Lamarre,
Sara Ejtemaee,
William Bernoudy,
Isil Ozfidan,
Anatoly Yu. Smirnov,
Mauricio Reis,
Fabio Altomare,
Michael Babcock,
Catia Baron,
Andrew J. Berkley,
Kelly Boothby,
Paul I. Bunyk,
Holly Christiani,
Colin Enderud,
Bram Evert,
Richard Harris,
Emile Hoskinson,
Shuiyuan Huang,
Kais Jooya,
Ali Khodabandelou
, et al. (29 additional authors not shown)
Abstract:
The promise of quantum computing lies in harnessing programmable quantum devices for practical applications such as efficient simulation of quantum materials and condensed matter systems. One important task is the simulation of geometrically frustrated magnets in which topological phenomena can emerge from competition between quantum and thermal fluctuations. Here we report on experimental observa…
▽ More
The promise of quantum computing lies in harnessing programmable quantum devices for practical applications such as efficient simulation of quantum materials and condensed matter systems. One important task is the simulation of geometrically frustrated magnets in which topological phenomena can emerge from competition between quantum and thermal fluctuations. Here we report on experimental observations of relaxation in such simulations, measured on up to 1440 qubits with microsecond resolution. By initializing the system in a state with topological obstruction, we observe quantum annealing (QA) relaxation timescales in excess of one microsecond. Measurements indicate a dynamical advantage in the quantum simulation over the classical approach of path-integral Monte Carlo (PIMC) fixed-Hamiltonian relaxation with multiqubit cluster updates. The advantage increases with both system size and inverse temperature, exceeding a million-fold speedup over a CPU. This is an important piece of experimental evidence that in general, PIMC does not mimic QA dynamics for stoquastic Hamiltonians. The observed scaling advantage, for simulation of frustrated magnetism in quantum condensed matter, demonstrates that near-term quantum devices can be used to accelerate computational tasks of practical relevance.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Demonstration of nonstoquastic Hamiltonian in coupled superconducting flux qubits
Authors:
I. Ozfidan,
C. Deng,
A. Y. Smirnov,
T. Lanting,
R. Harris,
L. Swenson,
J. Whittaker,
F. Altomare,
M. Babcock,
C. Baron,
A. J. Berkley,
K. Boothby,
H. Christiani,
P. Bunyk,
C. Enderud,
B. Evert,
M. Hager,
A. Hajda,
J. Hilton,
S. Huang,
E. Hoskinson,
M. W. Johnson,
K. Jooya,
E. Ladizinsky,
N. Ladizinsky
, et al. (23 additional authors not shown)
Abstract:
Quantum annealing (QA) is a heuristic algorithm for finding low-energy configurations of a system, with applications in optimization, machine learning, and quantum simulation. Up to now, all implementations of QA have been limited to qubits coupled via a single degree of freedom. This gives rise to a stoquastic Hamiltonian that has no sign problem in quantum Monte Carlo (QMC) simulations. In this…
▽ More
Quantum annealing (QA) is a heuristic algorithm for finding low-energy configurations of a system, with applications in optimization, machine learning, and quantum simulation. Up to now, all implementations of QA have been limited to qubits coupled via a single degree of freedom. This gives rise to a stoquastic Hamiltonian that has no sign problem in quantum Monte Carlo (QMC) simulations. In this paper, we report implementation and measurements of two superconducting flux qubits coupled via two canonically conjugate degrees of freedom (charge and flux) to achieve a nonstoquastic Hamiltonian. Such coupling can enhance performance of QA processors, extend the range of quantum simulations. We perform microwave spectroscopy to extract circuit parameters and show that the charge coupling manifests itself as a YY interaction in the computational basis. We observe destructive interference in quantum coherent oscillations between the computational basis states of the two-qubit system. Finally, we show that the extracted Hamiltonian is nonstoquastic over a wide range of parameters.
△ Less
Submitted 8 November, 2019; v1 submitted 14 March, 2019;
originally announced March 2019.
-
Observation of topological phenomena in a programmable lattice of 1,800 qubits
Authors:
Andrew D. King,
Juan Carrasquilla,
Isil Ozfidan,
Jack Raymond,
Evgeny Andriyash,
Andrew Berkley,
Mauricio Reis,
Trevor M. Lanting,
Richard Harris,
Gabriel Poulin-Lamarre,
Anatoly Yu. Smirnov,
Christopher Rich,
Fabio Altomare,
Paul Bunyk,
Jed Whittaker,
Loren Swenson,
Emile Hoskinson,
Yuki Sato,
Mark Volkmann,
Eric Ladizinsky,
Mark Johnson,
Jeremy Hilton,
Mohammad H. Amin
Abstract:
The celebrated work of Berezinskii, Kosterlitz and Thouless in the 1970s revealed exotic phases of matter governed by topological properties of low-dimensional materials such as thin films of superfluids and superconductors. Key to this phenomenon is the appearance and interaction of vortices and antivortices in an angular degree of freedom---typified by the classical XY model---due to thermal flu…
▽ More
The celebrated work of Berezinskii, Kosterlitz and Thouless in the 1970s revealed exotic phases of matter governed by topological properties of low-dimensional materials such as thin films of superfluids and superconductors. Key to this phenomenon is the appearance and interaction of vortices and antivortices in an angular degree of freedom---typified by the classical XY model---due to thermal fluctuations. In the 2D Ising model this angular degree of freedom is absent in the classical case, but with the addition of a transverse field it can emerge from the interplay between frustration and quantum fluctuations. Consequently a Kosterlitz-Thouless (KT) phase transition has been predicted in the quantum system by theory and simulation. Here we demonstrate a large-scale quantum simulation of this phenomenon in a network of 1,800 in situ programmable superconducting flux qubits arranged in a fully-frustrated square-octagonal lattice. Essential to the critical behavior, we observe the emergence of a complex order parameter with continuous rotational symmetry, and the onset of quasi-long-range order as the system approaches a critical temperature. We use a simple but previously undemonstrated approach to statistical estimation with an annealing-based quantum processor, performing Monte Carlo sampling in a chain of reverse quantum annealing protocols. Observations are consistent with classical simulations across a range of Hamiltonian parameters. We anticipate that our approach of using a quantum processor as a programmable magnetic lattice will find widespread use in the simulation and development of exotic materials.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout
Authors:
J. D. Whittaker,
L. J. Swenson,
M. H. Volkmann,
P. Spear,
F. Altomare,
A. J. Berkley,
B. Bumble,
P. Bunyk,
P. K. Day,
B. H. Eom,
R. Harris,
J. P. Hilton,
E. Hoskinson,
M. W. Johnson,
A. Kleinsasser,
E. Ladizinsky,
T. Lanting,
T. Oh,
I. Perminov,
E. Tolkacheva,
J. Yao
Abstract:
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector ba…
▽ More
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector bandwidth. For all existing designs, fluctuations in fabrication tolerances result in a non-uniform shift in resonance frequency and sensitivity, which ultimately limits the efficiency of band-width utilization. Here we present the design, implementation, and initial characterization of a superconducting microresonator readout integrating two tunable inductances per detector. We demonstrate that these tuning elements provide independent control of both the detector frequency and sensitivity, allowing us to maximize the transmission line bandwidth utilization. Finally we discuss the integration of these detectors in a multilayer fabrication stack for high-speed readout of the D-Wave quantum processor, highlighting the use of control and routing circuitry composed of single flux-quantum loops to minimize the number of control wires at the lowest temperature stage.
△ Less
Submitted 22 April, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Status of SuperSpec: A Broadband, On-Chip Millimeter-Wave Spectrometer
Authors:
S. Hailey-Dunsheath,
E. Shirokoff,
P. S. Barry,
C. M. Bradford,
G. Chattopadhyay,
P. Day,
S. Doyle,
M. Hollister,
A. Kovacs,
H. G. LeDuc,
P. Mauskopf,
C. M. McKenney,
R. Monroe,
R. O'Brient,
S. Padin,
T. Reck,
L. Swenson,
C. E. Tucker,
J. Zmuidzinas
Abstract:
SuperSpec is a novel on-chip spectrometer we are develo** for multi-object, moderate resolution (R = 100 - 500), large bandwidth (~1.65:1) submillimeter and millimeter survey spectroscopy of high-redshift galaxies. The spectrometer employs a filter bank architecture, and consists of a series of half-wave resonators formed by lithographically-patterned superconducting transmission lines. The sign…
▽ More
SuperSpec is a novel on-chip spectrometer we are develo** for multi-object, moderate resolution (R = 100 - 500), large bandwidth (~1.65:1) submillimeter and millimeter survey spectroscopy of high-redshift galaxies. The spectrometer employs a filter bank architecture, and consists of a series of half-wave resonators formed by lithographically-patterned superconducting transmission lines. The signal power admitted by each resonator is detected by a lumped element titanium nitride (TiN) kinetic inductance detector (KID) operating at 100-200 MHz. We have tested a new prototype device that is more sensitive than previous devices, and easier to fabricate. We present a characterization of a representative R=282 channel at f = 236 GHz, including measurements of the spectrometer detection efficiency, the detector responsivity over a large range of optical loading, and the full system optical efficiency. We outline future improvements to the current system that we expect will enable construction of a photon-noise-limited R=100 filter bank, appropriate for a line intensity map** experiment targeting the [CII] 158 micron transition during the Epoch of Reionization
△ Less
Submitted 9 January, 2015;
originally announced January 2015.
-
Operation of a titanium nitride superconducting microresonator detector in the nonlinear regime
Authors:
L. J. Swenson,
P. K. Day,
B. H. Eom,
H. G. Leduc,
N. Llombart,
C. M. McKenney,
O. Noroozian,
J. Zmuidzinas
Abstract:
If driven sufficiently strongly, superconducting microresonators exhibit nonlinear behavior including response bifurcation. This behavior can arise from a variety of physical mechanisms including heating effects, grain boundaries or weak links, vortex penetration, or through the intrinsic nonlinearity of the kinetic inductance. Although microresonators used for photon detection are usually driven…
▽ More
If driven sufficiently strongly, superconducting microresonators exhibit nonlinear behavior including response bifurcation. This behavior can arise from a variety of physical mechanisms including heating effects, grain boundaries or weak links, vortex penetration, or through the intrinsic nonlinearity of the kinetic inductance. Although microresonators used for photon detection are usually driven fairly hard in order to optimize their sensitivity, most experiments to date have not explored detector performance beyond the onset of bifurcation. Here we present measurements of a lumped-element superconducting microresonator designed for use as a far-infrared detector and operated deep into the nonlinear regime. The 1 GHz resonator was fabricated from a 22 nm thick titanium nitride film with a critical temperature of 2 K and a normal-state resistivity of $100\, μΩ\,$cm. We measured the response of the device when illuminated with 6.4 pW optical loading using microwave readout powers that ranged from the low-power, linear regime to 18 dB beyond the onset of bifurcation. Over this entire range, the nonlinear behavior is well described by a nonlinear kinetic inductance. The best noise-equivalent power of $2 \times 10^{-16}$ W/Hz$^{1/2}$ at 10 Hz was measured at the highest readout power, and represents a $\sim$10 fold improvement compared with operating below the onset of bifurcation.
△ Less
Submitted 18 May, 2013;
originally announced May 2013.
-
Development of Lumped Element Kinetic Inductance Detectors for NIKA
Authors:
M. Roesch,
A. Benoit,
A. Bideaud,
N. Boudou,
M. Calvo,
A. Cruciani,
S. Doyle,
H. G. Leduc,
A. Monfardini,
L. Swenson,
S. Leclercq,
P. Mauskopf,
K. F. Schuster
Abstract:
Lumped-element kinetic inductance detectors(LEKIDs) have recently shown considerable promise as direct absorption mm-wavelength detectors for astronomical applications. One major research thrust within the Néel Iram Kids Array (NIKA) collaboration has been to investigate the suitability of these detectors for deployment at the 30-meter IRAM telescope located on Pico Veleta in Spain. Compared to mi…
▽ More
Lumped-element kinetic inductance detectors(LEKIDs) have recently shown considerable promise as direct absorption mm-wavelength detectors for astronomical applications. One major research thrust within the Néel Iram Kids Array (NIKA) collaboration has been to investigate the suitability of these detectors for deployment at the 30-meter IRAM telescope located on Pico Veleta in Spain. Compared to microwave kinetic inductance detectors (MKID), using quarter wavelength resonators, the resonant circuit of a LEKID consists of a discrete inductance and capacitance coupled to a feedline. A high and constant current density distribution in the inductive part of these resonators makes them very sensitive. Due to only one metal layer on a silicon substrate, the fabrication is relatively easy. In order to optimize the LEKIDs for this application, we have recently probed a wide variety of individual resonator and array parameters through simulation and physical testing. This included determining the optimal feed-line coupling, pixel geometry, resonator distribution within an array (in order to minimize pixel cross-talk), and resonator frequency spacing. Based on these results, a 144-pixel Aluminum array was fabricated and tested in a dilution fridge with optical access, yielding an average optical NEP of ~2E-16 W/Hz^1/2 (best pixels showed NEP = 6E-17 W/Hz^1/2 under 4-8 pW loading per pixel). In October 2010 the second prototype of LEKIDs has been tested at the IRAM 30 m telescope. A new LEKID geometry for 2 polarizations will be presented. Also first optical measurements of a titanium nitride array will be discussed.
△ Less
Submitted 19 December, 2012;
originally announced December 2012.
-
MKID development for SuperSpec: an on-chip, mm-wave, filter-bank spectrometer
Authors:
Erik Shirokoff,
Peter S. Barry,
Charles M. Bradford,
Goutam Chattopadhyay,
Peter Day,
Simon Doyle,
Steve Hailey-Dunsheath,
Matthew I. Hollister,
Attila Kovács,
Christopher McKenney,
Henry G. Leduc,
Nuria Llombart,
Daniel P. Marrone,
Philip Mauskopf,
Roger O'Brient,
Stephen Padin,
Theodore Reck,
Loren J. Swenson,
Jonas Zmuidzinas
Abstract:
SuperSpec is an ultra-compact spectrometer-on-a-chip for millimeter and submillimeter wavelength astronomy. Its very small size, wide spectral bandwidth, and highly multiplexed readout will enable construction of powerful multibeam spectrometers for high-redshift observations. The spectrometer consists of a horn-coupled microstrip feedline, a bank of narrow-band superconducting resonator filters t…
▽ More
SuperSpec is an ultra-compact spectrometer-on-a-chip for millimeter and submillimeter wavelength astronomy. Its very small size, wide spectral bandwidth, and highly multiplexed readout will enable construction of powerful multibeam spectrometers for high-redshift observations. The spectrometer consists of a horn-coupled microstrip feedline, a bank of narrow-band superconducting resonator filters that provide spectral selectivity, and Kinetic Inductance Detectors (KIDs) that detect the power admitted by each filter resonator. The design is realized using thin-film lithographic structures on a silicon wafer. The mm-wave microstrip feedline and spectral filters of the first prototype are designed to operate in the band from 195-310 GHz and are fabricated from niobium with at Tc of 9.2K. The KIDs are designed to operate at hundreds of MHz and are fabricated from titanium nitride with a Tc of 2K. Radiation incident on the horn travels along the mm-wave microstrip, passes through the frequency-selective filter, and is finally absorbed by the corresponding KID where it causes a measurable shift in the resonant frequency. In this proceedings, we present the design of the KIDs employed in SuperSpec and the results of initial laboratory testing of a prototype device. We will also briefly describe the ongoing development of a demonstration instrument that will consist of two 500-channel, R=700 spectrometers, one operating in the 1-mm atmospheric window and the other covering the 650 and 850 micron bands.
△ Less
Submitted 7 November, 2012;
originally announced November 2012.
-
SuperSpec: design concept and circuit simulations
Authors:
Attila Kovács,
Peter S. Barry,
Charles M. Bradford,
Goutam Chattopadhyay,
Peter Day,
Simon Doyle,
Steve Hailey-Dunsheath,
Matthew Hollister,
Christopher McKenney,
Henry G. LeDuc,
Nuria Llombart,
Daniel P. Marrone,
Philip Mauskopf,
Roger O'Brient,
Stephen Padin,
Loren J. Swenson,
Jonas Zmuidzinas
Abstract:
SuperSpec is a pathfinder for future lithographic spectrometer cameras, which promise to energize extra-galactic astrophysics at (sub)millimeter wavelengths: delivering 200--500 km/s spectral velocity resolution over an octave bandwidth for every pixel in a telescope's field of view. We present circuit simulations that prove the concept, which enables complete millimeter-band spectrometer devices…
▽ More
SuperSpec is a pathfinder for future lithographic spectrometer cameras, which promise to energize extra-galactic astrophysics at (sub)millimeter wavelengths: delivering 200--500 km/s spectral velocity resolution over an octave bandwidth for every pixel in a telescope's field of view. We present circuit simulations that prove the concept, which enables complete millimeter-band spectrometer devices in just a few square-millimeter footprint. We evaluate both single-stage and two-stage channelizing filter designs, which separate channels into an array of broad-band detectors, such as bolometers or kinetic inductance detector (KID) devices. We discuss to what degree losses (by radiation or by absorption in the dielectric) and fabrication tolerances affect the resolution or performance of such devices, and what steps we can take to mitigate the degradation. Such design studies help us formulate critical requirements on the materials and fabrication process, and help understand what practical limits currently exist to the capabilities these devices can deliver today or over the next few years.
△ Less
Submitted 5 November, 2012;
originally announced November 2012.
-
MAKO: a pathfinder instrument for on-sky demonstration of low-cost 350 micron imaging arrays
Authors:
Loren J. Swenson,
Peter K. Day,
Charles D. Dowell,
Byeong H. Eom,
Matthew I. Hollister,
Robert Jarnot,
Attila Kovãcs,
Henry G. Leduc,
Christopher M. McKenney,
Ryan Monroe,
Tony Mroczkowski,
Hien T. Nguyen,
Jonas Zmuidzinas
Abstract:
Submillimeter cameras now have up to $10^4$ pixels (SCUBA 2). The proposed CCAT 25-meter submillimeter telescope will feature a 1 degree field-of-view. Populating the focal plane at 350 microns would require more than $10^6$ photon-noise limited pixels. To ultimately achieve this scaling, simple detectors and high-density multiplexing are essential. We are addressing this long-term challenge throu…
▽ More
Submillimeter cameras now have up to $10^4$ pixels (SCUBA 2). The proposed CCAT 25-meter submillimeter telescope will feature a 1 degree field-of-view. Populating the focal plane at 350 microns would require more than $10^6$ photon-noise limited pixels. To ultimately achieve this scaling, simple detectors and high-density multiplexing are essential. We are addressing this long-term challenge through the development of frequency-multiplexed superconducting microresonator detector arrays. These arrays use lumped-element, direct-absorption resonators patterned from titanium nitride films. We will discuss our progress toward constructing a scalable 350 micron pathfinder instrument focusing on fabrication simplicity, multiplexing density, and ultimately a low per-pixel cost.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
Semantic Networks of Interests in Online NSSI Communities
Authors:
Dmitry Zinoviev,
Dan Stefanescu,
Lance Swenson,
Gary Fireman
Abstract:
Persons who engage in non-suicidal self-injury (NSSI), often conceal their practices which limits the examination and understanding of those who engage in NSSI. The goal of this research is to utilize public online social networks (namely, in LiveJournal, a major blogging network) to observe the NSSI population's communication in a naturally occurring setting. Specifically, LiveJournal users can p…
▽ More
Persons who engage in non-suicidal self-injury (NSSI), often conceal their practices which limits the examination and understanding of those who engage in NSSI. The goal of this research is to utilize public online social networks (namely, in LiveJournal, a major blogging network) to observe the NSSI population's communication in a naturally occurring setting. Specifically, LiveJournal users can publicly declare their interests. We collected the self-declared interests of 22,000 users who are members of or participate in 43 NSSI-related communities. We extracted a bimodal socio-semantic network of users and interests based on their similarity. The semantic subnetwork of interests contains NSSI terms (such as "self-injury" and "razors"), references to music performers (such as "Nine Inch Nails"), and general daily life and creativity related terms (such as "poetry" and "boys"). Assuming users are genuine in their declarations, the words reveal distinct patterns of interest and may signal keys to NSSI.
△ Less
Submitted 24 June, 2012;
originally announced June 2012.
-
A `transversal' for minimal invariant sets in the boundary of a CAT(0) group
Authors:
Dan Guralnik,
Eric L. Swenson
Abstract:
We introduce new techniques for studying boundary dynamics of CAT(0) groups. For a group $G$ acting geometrically on a CAT(0) space $X$ we show there is a flat $F\subset X$ of maximal dimension whose boundary sphere intersects every minimal $G$-invariant subset of $\partial_\infty X$. As a result we derive a necessary and sufficient dynamical condition for $G$ to be virtually-Abelian, as well as a…
▽ More
We introduce new techniques for studying boundary dynamics of CAT(0) groups. For a group $G$ acting geometrically on a CAT(0) space $X$ we show there is a flat $F\subset X$ of maximal dimension whose boundary sphere intersects every minimal $G$-invariant subset of $\partial_\infty X$. As a result we derive a necessary and sufficient dynamical condition for $G$ to be virtually-Abelian, as well as a new approach to Ballmann's rank rigidity conjecture.
△ Less
Submitted 17 November, 2011; v1 submitted 15 February, 2011;
originally announced February 2011.
-
Electronics and data acquisition demonstrator for a kinetic inductance camera
Authors:
O. Bourrion,
A. Bideaud,
A. Benoit,
A. Cruciani,
J. F. Macias-Perez,
A. Monfardini,
M. Roesch,
L. Swenson,
C. Vescovi
Abstract:
A prototype of digital frequency multiplexing electronics allowing the real time monitoring of kinetic inductance detector (KIDs) arrays for mm-wave astronomy has been developed. It requires only 2 coaxial cables for instrumenting a large array. For that, an excitation comb of frequencies is generated and fed through the detector. The direct frequency synthesis and the data acquisition relies heav…
▽ More
A prototype of digital frequency multiplexing electronics allowing the real time monitoring of kinetic inductance detector (KIDs) arrays for mm-wave astronomy has been developed. It requires only 2 coaxial cables for instrumenting a large array. For that, an excitation comb of frequencies is generated and fed through the detector. The direct frequency synthesis and the data acquisition relies heavily on a large FPGA using parallelized and pipelined processing. The prototype can instrument 128 resonators (pixels) over a bandwidth of 125 MHz. This paper describes the technical solution chosen, the algorithm used and the results obtained.
△ Less
Submitted 1 June, 2011; v1 submitted 7 February, 2011;
originally announced February 2011.
-
A dual-band millimeter-wave kinetic inductance camera for the IRAM 30-meter telescope
Authors:
A. Monfardini,
A. Benoit,
A. Bideaud,
L. J. Swenson,
M. Roesch,
F. X. Desert,
S. Doyle,
A. Endo,
A. Cruciani,
P. Ade,
A. M. Baryshev,
J. J. A. Baselmans,
O. Bourrion,
M. Calvo,
P. Camus,
L. Ferrari,
C. Giordano,
C. Hoffmann,
S. Leclercq,
J. F. Macias-Perez,
P. Mauskopf,
K. F. Schuster,
C. Tucker,
C. Vescovi,
S. J. C. Yates
Abstract:
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imagin…
▽ More
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imaging at 150 GHz. Subsequently, an improved system has been developed and tested in October 2010 at the Pico Veleta telescope. The instrument upgrades included dual-band optics allowing simultaneous imaging at 150 GHz and 220 GHz, faster sampling electronics enabling synchronous measurement of up to 112 pixels per measurement band, improved single-pixel sensitivity, and the fabrication of a sky simulator to replicate conditions present at the telescope. Results. The new dual-band NIKA was successfully tested in October 2010, performing in-line with sky simulator predictions. Initially the sources targeted during the 2009 run were re-imaged, verifying the improved system performance. An optical NEP was then calculated to be around 2 \dot 10-16 W/Hz1/2. This improvement in comparison with the 2009 run verifies that NIKA is approaching the target sensitivity for photon-noise limited ground-based detectors. Taking advantage of the larger arrays and increased sensitivity, a number of scientifically-relevant faint and extended objects were then imaged including the Galactic Center SgrB2(FIR1), the radio galaxy Cygnus A and the NGC1068 Seyfert galaxy. These targets were all observed simultaneously in the 150 GHz and 220 GHz atmospheric windows.
△ Less
Submitted 8 February, 2011; v1 submitted 4 February, 2011;
originally announced February 2011.
-
High-speed phonon imaging using frequency-multiplexed kinetic inductance detectors
Authors:
L. J. Swenson,
A. Cruciani,
A. Benoit,
M. Roesch,
C. S. Yung,
A. Bideaud,
A. Monfardini
Abstract:
We present a measurement of phonon propagation in a silicon wafer utilizing an array of frequency-multiplexed superconducting resonators coupled to a single transmission line. The electronic readout permits fully synchronous array sampling with a per-resonator bandwidth of 1.2 MHz, allowing sub-$μ$s array imaging. This technological achievement is potentially vital in a variety of low-temperature…
▽ More
We present a measurement of phonon propagation in a silicon wafer utilizing an array of frequency-multiplexed superconducting resonators coupled to a single transmission line. The electronic readout permits fully synchronous array sampling with a per-resonator bandwidth of 1.2 MHz, allowing sub-$μ$s array imaging. This technological achievement is potentially vital in a variety of low-temperature applications, including single-photon counting, quantum-computing and dark-matter searches.
△ Less
Submitted 18 June, 2010; v1 submitted 28 April, 2010;
originally announced April 2010.
-
NIKA: A millimeter-wave kinetic inductance camera
Authors:
A. Monfardini,
L. J. Swenson,
A. Bideaud,
F. X. Désert,
S. J. C. Yates,
A. Benoit,
A. M. Baryshev,
J. J. A. Baselmans,
S. Doyle,
B. Klein,
M. Roesch,
C. Tucker,
P. Ade,
M. Calvo,
P. Camus,
C. Giordano,
R. Guesten,
C. Hoffmann,
S. Leclercq,
P. Mauskopf,
K. F. Schuster
Abstract:
Current generation millimeter wavelength detectors suffer from scaling limits imposed by complex cryogenic readout electronics. To circumvent this it is imperative to investigate technologies that intrinsically incorporate strong multiplexing. One possible solution is the kinetic inductance detector (KID). In order to assess the potential of this nascent technology, a prototype instrument optimize…
▽ More
Current generation millimeter wavelength detectors suffer from scaling limits imposed by complex cryogenic readout electronics. To circumvent this it is imperative to investigate technologies that intrinsically incorporate strong multiplexing. One possible solution is the kinetic inductance detector (KID). In order to assess the potential of this nascent technology, a prototype instrument optimized for the 2 mm atmospheric window was constructed. Known as the Néel IRAM KIDs Array (NIKA), it was recently tested at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. The measurement resulted in the imaging of a number of sources, including planets, quasars, and galaxies. The images for Mars, radio star MWC349, quasar 3C345, and galaxy M87 are presented. From these results, the optical NEP was calculated to be around $1 \times 10^{-15}$ W$ / $Hz$^{1/2}$. A factor of 10 improvement is expected to be readily feasible by improvements in the detector materials and reduction of performance-degrading spurious radiation.
△ Less
Submitted 20 June, 2010; v1 submitted 13 April, 2010;
originally announced April 2010.
-
From continua to R-trees
Authors:
Panos Papasoglu,
Eric L Swenson
Abstract:
We show how to associate an R-tree to the set of cut points of a continuum. If X is a continuum without cut points we show how to associate an R-tree to the set of cut pairs of X.
We show how to associate an R-tree to the set of cut points of a continuum. If X is a continuum without cut points we show how to associate an R-tree to the set of cut pairs of X.
△ Less
Submitted 15 May, 2009;
originally announced May 2009.
-
In-situ measurement of the permittivity of helium using microwave NbN resonators
Authors:
G. J. Grabovskij,
L. J. Swenson,
O. Buisson,
C. Hoffmann,
A. Monfardini,
J. -C. Villégier
Abstract:
By measuring the electrical transport properties of superconducting NbN quarter-wave resonators in direct contact with a helium bath, we have demonstrated a high-speed and spatially sensitive sensor for the permittivity of helium. In our implementation a $\sim10^{-3}$ mm$^3$ sensing volume is measured with a bandwidth of 300 kHz in the temperature range 1.8 to 8.8 K. The minimum detectable chang…
▽ More
By measuring the electrical transport properties of superconducting NbN quarter-wave resonators in direct contact with a helium bath, we have demonstrated a high-speed and spatially sensitive sensor for the permittivity of helium. In our implementation a $\sim10^{-3}$ mm$^3$ sensing volume is measured with a bandwidth of 300 kHz in the temperature range 1.8 to 8.8 K. The minimum detectable change of the permittivity of helium is calculated to be $\sim6\times$$10^{-11}$ $ε_0$/Hz$^{1/2}$ with a sensitivity of order $10^{-13}$ $ε_0$/Hz$^{1/2}$ easily achievable. Potential applications include operation as a fast, localized helium thermometer and as a transducer in superfluid hydrodynamic experiments.
△ Less
Submitted 29 September, 2008;
originally announced September 2008.
-
Bootstrap** in convergence groups
Authors:
Eric L. Swenson
Abstract:
We prove a true bootstrap** result for convergence groups acting on a Peano continuum. We give an example of a Kleinian group H which is the amalgamation of two closed hyperbolic surface groups along a simple closed curve. The limit set Lambda H is the closure of a `tree of circles' (adjacent circles meeting in pairs of points). We alter the action of H on its limit set such that H no longer a…
▽ More
We prove a true bootstrap** result for convergence groups acting on a Peano continuum. We give an example of a Kleinian group H which is the amalgamation of two closed hyperbolic surface groups along a simple closed curve. The limit set Lambda H is the closure of a `tree of circles' (adjacent circles meeting in pairs of points). We alter the action of H on its limit set such that H no longer acts as a convergence group, but the stabilizers of the circles remain unchanged, as does the action of a circle stabilizer on said circle. This is done by first separating the circles and then gluing them together backwards.
△ Less
Submitted 9 August, 2005;
originally announced August 2005.
-
Mixing with the radiofrequency single-electron transistor
Authors:
L. J. Swenson,
D. R. Schmidt,
J. S. Aldridge,
D. K. Wood,
A. N. Cleland
Abstract:
By configuring a radio-frequency single-electron transistor as a mixer, we demonstrate a unique implementation of this device, that achieves good charge sensitivity with large bandwidth about a tunable center frequency. In our implementation we achieve a measurement bandwidth of 16 MHz, with a tunable center frequency from 0 to 1.2 GHz, demonstrated with the transistor operating at 300 mK. Ultim…
▽ More
By configuring a radio-frequency single-electron transistor as a mixer, we demonstrate a unique implementation of this device, that achieves good charge sensitivity with large bandwidth about a tunable center frequency. In our implementation we achieve a measurement bandwidth of 16 MHz, with a tunable center frequency from 0 to 1.2 GHz, demonstrated with the transistor operating at 300 mK. Ultimately this device is limited in center frequency by the RC time of the transistor's center island, which for our device is ~ 1.6 GHz, close to the measured value. The measurement bandwidth is determined by the quality factor of the readout tank circuit.
△ Less
Submitted 26 January, 2005;
originally announced January 2005.
-
Convergence groups from subgroups
Authors:
Eric L Swenson
Abstract:
We give sufficient conditions for a group of homeomorphisms of a Peano continuum X without cut-points to be a convergence group. The condition is that there is a collection of convergence subgroups whose limit sets `cut up' X in the correct fashion. This is closely related to the result in [E Swenson, Axial pairs and convergence groups on S^1, Topology 39 (2000) 229-237].
We give sufficient conditions for a group of homeomorphisms of a Peano continuum X without cut-points to be a convergence group. The condition is that there is a collection of convergence subgroups whose limit sets `cut up' X in the correct fashion. This is closely related to the result in [E Swenson, Axial pairs and convergence groups on S^1, Topology 39 (2000) 229-237].
△ Less
Submitted 31 December, 2002;
originally announced December 2002.
