-
Deep-learning Optical Flow Outperforms PIV in Obtaining Velocity Fields from Active Nematics
Authors:
Phu N. Tran,
Sattvic Ray,
Linnea Lemma,
Yunrui Li,
Reef Sweeney,
Aparna Baskaran,
Zvonimir Dogic,
Pengyu Hong,
Michael F. Hagan
Abstract:
Deep learning-based optical flow (DLOF) extracts features in adjacent video frames with deep convolutional neural networks. It uses those features to estimate the inter-frame motions of objects at the pixel level. In this article, we evaluate the ability of optical flow to quantify the spontaneous flows of MT-based active nematics under different labeling conditions. We compare DLOF against the co…
▽ More
Deep learning-based optical flow (DLOF) extracts features in adjacent video frames with deep convolutional neural networks. It uses those features to estimate the inter-frame motions of objects at the pixel level. In this article, we evaluate the ability of optical flow to quantify the spontaneous flows of MT-based active nematics under different labeling conditions. We compare DLOF against the commonly used technique, particle imaging velocimetry (PIV). We obtain flow velocity ground truths either by performing semi-automated particle tracking on samples with sparsely labeled filaments, or from passive tracer beads. We find that DLOF produces significantly more accurate velocity fields than PIV for densely labeled samples. We show that the breakdown of PIV arises because the algorithm cannot reliably distinguish contrast variations at high densities, particularly in directions parallel to the nematic director. DLOF overcomes this limitation. For sparsely labeled samples, DLOF and PIV produce results with similar accuracy, but DLOF gives higher-resolution fields. Our work establishes DLOF as a versatile tool for measuring fluid flows in a broad class of active, soft, and biophysical systems.
△ Less
Submitted 26 April, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Design of Passive and Structural Conductors for Tokamaks Using Thin-Wall Eddy Current Modeling
Authors:
A. F. Battey,
C. Hansen,
D. Garnier,
D. Weisberg,
C. Paz-Soldan,
R. Sweeney,
R. A. Tinguely,
A. J. Creely
Abstract:
A new three-dimensional electromagnetic modeling tool ThinCurr has been developed using the existing PSI-Tet finite-element code in support of conducting structure design work for both the SPARC and DIII-D tokamaks. Within this framework a 3D conducting structure model was created for both the SPARC and DIII-D tokamaks in the thin-wall limit. This model includes accurate details of the vacuum vess…
▽ More
A new three-dimensional electromagnetic modeling tool ThinCurr has been developed using the existing PSI-Tet finite-element code in support of conducting structure design work for both the SPARC and DIII-D tokamaks. Within this framework a 3D conducting structure model was created for both the SPARC and DIII-D tokamaks in the thin-wall limit. This model includes accurate details of the vacuum vessel and other conducting structural elements with realistic material resistivities. This model was leveraged to support the design of a passive runaway electron mitigation coil (REMC), studying the effect of various design parameters, including coil resistivity, current quench duration, and plasma vertical position, on the effectiveness of the coil. The REMC is a non-axisymmetric coil designed to passively drive large non-axisymmetric fields during the plasma disruption thereby destroying flux surfaces and deconfining RE seed populations. These studies indicate that current designs should apply substantial 3D fields at the plasma surface during future plasma current disruptions as well as highlight the importance of having the REMC conductors away from the machine midplane in order to ensure they are robust to off-normal disruption scenarios.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Bayesian Learning of Gas Transport in Three-Dimensional Fracture Networks
Authors:
Yingqi Shi,
Donald J. Berry,
John Kath,
Shams Lodhy,
An Ly,
Allon G. Percus,
Jeffrey D. Hyman,
Kelly Moran,
Justin Strait,
Matthew R. Sweeney,
Hari S. Viswanathan,
Philip H. Stauffer
Abstract:
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an e…
▽ More
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an efficient surrogate model, or emulator, for these three-dimensional DFN simulations. Our model trains on a small quantity of simulation data and, using a graph/path-based decomposition of the fracture network, rapidly predicts quantiles of the breakthrough time distribution. The approach, based on Gaussian Process Regression (GPR), outputs predictions that are within 20-30% of high-fidelity DFN simulation results. Unlike previously proposed methods, it also provides uncertainty quantification, outputting confidence intervals that are essential given the uncertainty inherent in subsurface modeling. Our trained model runs within a fraction of a second, which is considerably faster than other methods with comparable accuracy and multiple orders of magnitude faster than high-fidelity simulations.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Characterizing the impacts of multi-scale heterogeneity on solute transport in fracture networks
Authors:
Matthew R. Sweeney,
Jeffrey D. Hyman,
Daniel O'Malley,
Javier E. Santos,
J. William Carey,
Philip H. Stauffer,
Hari S. Viswanathan
Abstract:
We model flow and transport in three-dimensional fracture networks with varying degrees of fracture-to-fracture aperture/permeability heterogeneity and network density to show how changes in these properties can cause the emergence of anomalous flow and transport behavior. If fracture-to-fracture aperture heterogeneity is increased in sparse networks, velocity fluctuations can inhibit high flow ra…
▽ More
We model flow and transport in three-dimensional fracture networks with varying degrees of fracture-to-fracture aperture/permeability heterogeneity and network density to show how changes in these properties can cause the emergence of anomalous flow and transport behavior. If fracture-to-fracture aperture heterogeneity is increased in sparse networks, velocity fluctuations can inhibit high flow rates and solute transport can be delayed, even in cases where hydraulic aperture is monotonically increased. As the density of the networks is increased, more connected pathways allow for particles to bypass these effects. We discover transition behavior where with relatively few connected pathways in a network from inflow to outflow boundaries, the first arrival times of particles are not heavily affected by fracture-to-fracture aperture heterogeneity, but the scaling behavior of the tails is strongly influenced due to the particles being forced to sample some of the heterogeneity in the velocity field caused by aperture differences. These results reinforce the importance of considering multi-scale effects in fractured systems and can inform flow and transport processes in both natural and engineered fracture systems, especially the latter where high aperture fractures are often stimulated and connect to existing fracture networks with smaller apertures.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution
Authors:
Aleksandra A. Pachalieva,
Matthew R. Sweeney,
Hari Viswanathan,
Emily Stein,
Rosie Leone,
Jeffrey D. Hyman
Abstract:
We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters…
▽ More
We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the networks were generated, we upscaled them into a single continuum model using the upscaled discrete fracture matrix model presented by Sweeney et al. We considered steady, isothermal pressure-driven flow through each domain and then simulated conservative, decaying, and adsorbing tracers using a pulse injection into the domain. For each simulation, we calculated the effective permeability and solute breakthrough curves as quantities of interest to compare between network realizations. We found that selecting a mesh resolution such that the global topology of the upscaled mesh matches the fracture network is essential. If the upscaled mesh has a connected pathway of fracture (higher permeability) cells but the fracture network does not, then the estimates for effective permeability and solute breakthrough will be incorrect. False connections cannot be eliminated entirely, but they can be managed by choosing appropriate mesh resolution and refinement for a given network. Adopting octree meshing to obtain sufficient levels of refinement leads to fewer computational cells (up to a 90% reduction in overall cell count) when compared to using a uniform resolution grid and can result in a more accurate continuum representation of the true fracture network.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
On the minimum transport required to passively suppress runaway electrons in SPARC disruptions
Authors:
R. A. Tinguely,
I. Pusztai,
V. A. Izzo,
K. S'"arkimäki,
T. Fülöp,
D. T. Garnier,
R. S. Granetz,
M. Hoppe,
C. Paz-Soldan,
A. Sundström,
R. Sweeney
Abstract:
In [V.A. Izzo et al 2022 Nucl. Fusion 62 096029], state-of-the-art modeling of thermal and current quench (CQ) MHD coupled with a self-consistent evolution of runaway electron (RE) generation and transport showed that a non-axisymmetric (n = 1) in-vessel coil could passively prevent RE beam formation during disruptions in SPARC, a compact high-field tokamak projected to achieve a fusion gain Q > 2…
▽ More
In [V.A. Izzo et al 2022 Nucl. Fusion 62 096029], state-of-the-art modeling of thermal and current quench (CQ) MHD coupled with a self-consistent evolution of runaway electron (RE) generation and transport showed that a non-axisymmetric (n = 1) in-vessel coil could passively prevent RE beam formation during disruptions in SPARC, a compact high-field tokamak projected to achieve a fusion gain Q > 2 in DT plasmas. However, such suppression requires finite transport of REs within magnetic islands and re-healed flux surfaces; conservatively assuming zero transport in these regions leads to an upper bound of RE current ~1 MA compared to ~8.7 MA of pre-disruption plasma current. Further investigation finds that core-localized electrons, within r/a < 0.3 and with kinetic energies 0.2-15 MeV, contribute most to the RE plateau formation. Yet only a relatively small amount of transport, i.e. a diffusion coefficient ~18 $\mathrm{m^2/s}$, is needed in the core to fully mitigate these REs. Properly accounting for (i) the CQ electric field's effect on RE transport in islands and (ii) the contribution of significant RE currents to disruption MHD may help achieve this.
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Runaway electron deconfinement in SPARC and DIII-D by a passive 3D coil
Authors:
V. A. Izzo,
I. Pusztai,
K. Särkimäki,
A. Sundström,
D. Garnier,
D. Weisberg,
R. A. Tinguely,
C. Paz-Soldan,
R. S. Granetz,
R. Sweeney
Abstract:
The operation of a 3D coil--passively driven by the current quench loop voltage--for the deconfinement of runaway electrons is modeled for disruption scenarios in the SPARC and DIII-D tokamaks. Nonlinear MHD modeling is carried out with the NIMROD code including time-dependent magnetic field boundary conditions to simulate the effect of the coil. Further modeling in some cases uses the ASCOT5 code…
▽ More
The operation of a 3D coil--passively driven by the current quench loop voltage--for the deconfinement of runaway electrons is modeled for disruption scenarios in the SPARC and DIII-D tokamaks. Nonlinear MHD modeling is carried out with the NIMROD code including time-dependent magnetic field boundary conditions to simulate the effect of the coil. Further modeling in some cases uses the ASCOT5 code to calculate advection and diffusion coefficients for runaway electrons based on the NIMROD-calculated fields, and the DREAM code to compute the runaway evolution in the presence of these transport coefficients. Compared with similar modeling in Tinguely, et al [2021 Nucl. Fusion 61 124003], considerably more conservative assumptions are made with the ASCOT5 results, zeroing low levels of transport, particularly in regions in which closed flux surfaces have reformed. Of three coil geometries considered in SPARC, only the $n=1$ coil is found to have sufficient resonant components to suppress the runaway current growth. Without the new conservative transport assumptions, full suppression of the RE current is maintained when the TQ MHD is included in the simulation or when the RE current is limited to 250kA, but when transport in closed flux regions is fully suppressed, these scenarios allow RE beams on the order of 1-2MA to appear. Additional modeling is performed to consider the effects of the close ideal wall. In DIII-D, the current quench is modeled for both limited and diverted equilibrium shapes. In the limited shape, the onset of stochasticity is found to be insensitive to the coil current amplitude and governed largely by the evolution of the safety-factor profile. In both devices, prediction of the q-profile evolution is seen to be critical to predicting the later time effects of the coil.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
LaMPost: Design and Evaluation of an AI-assisted Email Writing Prototype for Adults with Dyslexia
Authors:
Steven M. Goodman,
Erin Buehler,
Patrick Clary,
Andy Coenen,
Aaron Donsbach,
Tiffanie N. Horne,
Michal Lahav,
Robert Macdonald,
Rain Breaw Michaels,
Ajit Narayanan,
Mahima Pushkarna,
Joel Riley,
Alex Santana,
Lei Shi,
Rachel Sweeney,
Phil Weaver,
Ann Yuan,
Meredith Ringel Morris
Abstract:
Prior work has explored the writing challenges experienced by people with dyslexia, and the potential for new spelling, grammar, and word retrieval technologies to address these challenges. However, the capabilities for natural language generation demonstrated by the latest class of large language models (LLMs) highlight an opportunity to explore new forms of human-AI writing support tools. In thi…
▽ More
Prior work has explored the writing challenges experienced by people with dyslexia, and the potential for new spelling, grammar, and word retrieval technologies to address these challenges. However, the capabilities for natural language generation demonstrated by the latest class of large language models (LLMs) highlight an opportunity to explore new forms of human-AI writing support tools. In this paper, we introduce LaMPost, a prototype email-writing interface that explores the potential for LLMs to power writing support tools that address the varied needs of people with dyslexia. LaMPost draws from our understanding of these needs and introduces novel AI-powered features for email-writing, including: outlining main ideas, generating a subject line, suggesting changes, rewriting a selection. We evaluated LaMPost with 19 adults with dyslexia, identifying many promising routes for further exploration (including the popularity of the "rewrite" and "subject line" features), but also finding that the current generation of LLMs may not surpass the accuracy and quality thresholds required to meet the needs of writers with dyslexia. Surprisingly, we found that participants' awareness of the AI had no effect on their perception of the system, nor on their feelings of autonomy, expression, and self-efficacy when writing emails. Our findings yield further insight into the benefits and drawbacks of using LLMs as writing support for adults with dyslexia and provide a foundation to build upon in future research.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Flow and Transport in Three-Dimensional Discrete Fracture Matrix Models using Mimetic Finite Difference on a Conforming Multi-Dimensional Mesh
Authors:
Jeffrey D. Hyman,
Matthew R. Sweeney,
Carl W. Gable,
Daniil Svyatsky,
Konstantin Lipnikov,
J. David Moulton
Abstract:
We present a comprehensive workflow to simulate single-phase flow and transport in fractured porous media using the discrete fracture matrix approach. The workflow has three primary parts: (1) a method for conforming mesh generation of and around a three-dimensional fracture network, (2) the discretization of the governing equations using a second-order mimetic finite difference method, and (3) im…
▽ More
We present a comprehensive workflow to simulate single-phase flow and transport in fractured porous media using the discrete fracture matrix approach. The workflow has three primary parts: (1) a method for conforming mesh generation of and around a three-dimensional fracture network, (2) the discretization of the governing equations using a second-order mimetic finite difference method, and (3) implementation of numerical methods for high-performance computing environments. A method to create a conforming Delaunay tetrahedralization of the volume surrounding the fracture network, where the triangular cells of the fracture mesh are faces in the volume mesh, that addresses pathological cases which commonly arise and degrade mesh quality is also provided. Our open-source subsurface simulator uses a hierarchy of process kernels (one kernel per physical process) that allows for both strong and weak coupling of the fracture and matrix domains. We provide verification tests based on analytic solutions for flow and transport, as well as numerical convergence. We also provide multiple expositions of the method in complex fracture networks. In the first example, we demonstrate that the method is robust by considering two scenarios where the fracture network acts as a barrier to flow, as the primary pathway, or offers the same resistance as the surrounding matrix. In the second test, flow and transport through a three-dimensional stochastically generated network containing 257 fractures is presented.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Variable resolution Poisson-disk sampling for meshing discrete fracture networks
Authors:
Johannes Krotz,
Matthew R. Sweeney,
Jeffrey D. Hyman,
Juan M. Restrepo,
Carl W. Gable
Abstract:
We present the near-Maximal Algorithm for Poisson-disk Sampling (nMAPS) to generate point distributions for variable resolution Delaunay triangular and tetrahedral meshes in two and three-dimensions, respectively. nMAPS consists of two principal stages. In the first stage, an initial point distribution is produced using a cell-based rejection algorithm. In the second stage, holes in the sample are…
▽ More
We present the near-Maximal Algorithm for Poisson-disk Sampling (nMAPS) to generate point distributions for variable resolution Delaunay triangular and tetrahedral meshes in two and three-dimensions, respectively. nMAPS consists of two principal stages. In the first stage, an initial point distribution is produced using a cell-based rejection algorithm. In the second stage, holes in the sample are detected using an efficient background grid and filled in to obtain a near-maximal covering. Extensive testing shows that nMAPS generates a variable resolution mesh in linear run time with the number of accepted points. We demonstrate nMAPS capabilities by meshing three-dimensional discrete fracture networks (DFN) and the surrounding volume. The discretized boundaries of the fractures, which are represented as planar polygons, are used as the seed of 2D-nMAPS to produce a conforming Delaunay triangulation. The combined mesh of the DFN is used as the seed for 3D-nMAPS, which produces conforming Delaunay tetrahedra surrounding the network. Under a set of conditions that naturally arise in maximal Poisson-disk samples and are satisfied by nMAPS, the two-dimensional Delaunay triangulations are guaranteed to only have well-behaved triangular faces. While nMAPS does not provide triangulation quality bounds in more than two dimensions, we found that low-quality tetrahedra in 3D are infrequent, can be readily detected and removed, and a high quality balanced mesh is produced.
△ Less
Submitted 26 November, 2021;
originally announced November 2021.
-
Flood Disasters and Health Among the Urban Poor
Authors:
Michelle Escobar Carias,
David Johnston,
Rachel Knott,
Rohan Sweeney
Abstract:
Billions of people live in urban poverty, with many forced to reside in disaster-prone areas. Research suggests that such disasters harm child nutrition and increase adult morbidity. However, little is known about impacts on mental health, particularly of people living in slums. In this paper we estimate the effects of flood disasters on the mental and physical health of poor adults and children i…
▽ More
Billions of people live in urban poverty, with many forced to reside in disaster-prone areas. Research suggests that such disasters harm child nutrition and increase adult morbidity. However, little is known about impacts on mental health, particularly of people living in slums. In this paper we estimate the effects of flood disasters on the mental and physical health of poor adults and children in urban Indonesia. Our data come from the Indonesia Family Life Survey and new surveys of informal settlement residents. We find that urban poor populations experience increases in acute morbidities and depressive symptoms following floods, that the negative mental health effects last longer, and that the urban wealthy show no health effects from flood exposure. Further analysis suggests that worse economic outcomes may be partly responsible. Overall, the results provide a more nuanced understanding of the morbidities experienced by populations most vulnerable to increased disaster occurrence.
△ Less
Submitted 25 April, 2022; v1 submitted 9 November, 2021;
originally announced November 2021.
-
Modeling the complete prevention of disruption-generated runaway electron beam formation with a passive 3D coil in SPARC
Authors:
RA Tinguely,
VA Izzo,
DT Garnier,
A Sundström,
K Särkimäki,
O Embréus,
T Fülöp,
RS Granetz,
M Hoppe,
I Pusztai,
R Sweeney
Abstract:
The potential formation of multi-mega-ampere beams of relativistic "runaway" electrons (REs) during sudden terminations of tokamak plasmas poses a significant challenge to the tokamak's development as a fusion energy source. Here, we use state-of-the-art modeling of disruption magnetohydrodynamics coupled with a self-consistent evolution of RE generation and transport to show that a non-axisymmetr…
▽ More
The potential formation of multi-mega-ampere beams of relativistic "runaway" electrons (REs) during sudden terminations of tokamak plasmas poses a significant challenge to the tokamak's development as a fusion energy source. Here, we use state-of-the-art modeling of disruption magnetohydrodynamics coupled with a self-consistent evolution of RE generation and transport to show that a non-axisymmetric in-vessel coil will passively prevent RE beam formation during disruptions in the SPARC tokamak, a compact, high-field, high-current device capable of achieving a fusion gain Q > 2 in deuterium-tritium plasmas.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Heat and Economic Preferences
Authors:
Michelle Escobar Carias,
David Johnston,
Rachel Knott,
Rohan Sweeney
Abstract:
The empirical evidence suggests that key accumulation decisions and risky choices associated with economic development depend, at least in part, on economic preferences such as willingness to take risk and patience. This paper studies whether temperature could be one of the potential channels that influences such economic preferences. Using data from the Indonesia Family Life Survey and NASAs Mode…
▽ More
The empirical evidence suggests that key accumulation decisions and risky choices associated with economic development depend, at least in part, on economic preferences such as willingness to take risk and patience. This paper studies whether temperature could be one of the potential channels that influences such economic preferences. Using data from the Indonesia Family Life Survey and NASAs Modern Era Retrospective Analysis for Research and Applications data we exploit quasi exogenous variations in outdoor temperatures caused by the random allocation of survey dates. This approach allows us to estimate the effects of temperature on elicited measures of risk aversion, rational choice violations, and impatience. We then explore three possible mechanisms behind this relationship, cognition, sleep, and mood. Our findings show that higher temperatures lead to significantly increased rational choice violations and impatience, but do not significantly increase risk aversion. These effects are mainly driven by night time temperatures on the day prior to the survey and less so by temperatures on the day of the survey. This impact is quasi linear and increasing when midnight outdoor temperatures are above 22C. The evidence shows that night time temperatures significantly deplete cognitive functioning, mathematical skills in particular. Based on these findings we posit that heat induced night time disturbances cause stress on critical parts of the brain, which then manifest in significantly lower cognitive functions that are critical for individuals to perform economically rational decision making.
△ Less
Submitted 29 August, 2022; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Induced transparency: interference or polarization?
Authors:
Changqing Wang,
Xuefeng Jiang,
William R. Sweeney,
Chia Wei Hsu,
Yiming Liu,
Guangming Zhao,
Bo Peng,
Mengzhen Zhang,
Liang Jiang,
A. Douglas Stone,
Lan Yang
Abstract:
The polarization of optical fields is a crucial degree of freedom in the all-optical analogue of electromagnetically induced transparency (EIT). However, the physical origins of EIT and polarization induced phenomena have not been well distinguished, which can lead to confusion in associated applications such as slow light and optical/quantum storage. Here we study the polarization effects in vari…
▽ More
The polarization of optical fields is a crucial degree of freedom in the all-optical analogue of electromagnetically induced transparency (EIT). However, the physical origins of EIT and polarization induced phenomena have not been well distinguished, which can lead to confusion in associated applications such as slow light and optical/quantum storage. Here we study the polarization effects in various optical EIT systems. We find that a polarization mismatch between whispering gallery modes in two indirectly coupled resonators can induce a narrow transparency window in the transmission spectrum resembling the EIT lineshape. However, such polarization induced transparency (PIT) is distinct from EIT: it originates from strong polarization rotation effects and shows unidirectional feature. The coexistence of PIT and EIT provides new routes for the manipulation of light flow in optical resonator systems.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Scenario adaptive disruption prediction study for next generation burning-plasma tokamaks
Authors:
J. Zhu,
C. Rea,
R. S. Granetz,
E. S. Marmar,
K. J. Montes,
R. Sweeney,
R. A. Tinguely,
D. L. Chen,
B. Shen,
B. J. Xiao,
D. Humphreys,
J. Barr,
O. Meneghini
Abstract:
Next generation high performance (HP) tokamaks risk damage from unmitigated disruptions at high current and power. Achieving reliable disruption prediction for a device's HP operation based on its low performance (LP) data is key to success. In this letter, through explorative data analysis and dedicated numerical experiments on multiple existing tokamaks, we demonstrate how the operational regime…
▽ More
Next generation high performance (HP) tokamaks risk damage from unmitigated disruptions at high current and power. Achieving reliable disruption prediction for a device's HP operation based on its low performance (LP) data is key to success. In this letter, through explorative data analysis and dedicated numerical experiments on multiple existing tokamaks, we demonstrate how the operational regimes of tokamaks can affect the power of a trained disruption predictor. First, our results suggest data-driven disruption predictors trained on abundant LP discharges work poorly on the HP regime of the same tokamak, which is a consequence of the distinct distributions of the tightly correlated signals related to disruptions in these two regimes. Second, we find that matching operational parameters among tokamaks strongly improves cross-machine accuracy which implies our model learns from the underlying scalings of dimensionless physics parameters like q_{95}, β_{p} and confirms the importance of these parameters in disruption physics and cross machine domain matching from the data-driven perspective. Finally, our results show how in the absence of HP data from the target devices, the best predictivity of the HP regime for the target machine can be achieved by combining LP data from the target with HP data from other machines. These results provide a possible disruption predictor development strategy for next generation tokamaks, such as ITER and SPARC, and highlight the importance of develo** on existing machines baseline scenario discharges of future tokamaks to collect more relevant disruptive data.
△ Less
Submitted 18 September, 2021;
originally announced September 2021.
-
Observation of coherent perfect absorption at an exceptional point
Authors:
Changqing Wang,
William R. Sweeney,
A. Douglas Stone,
Lan Yang
Abstract:
The past few years have witnessed growing interests in exceptional points (EPs) in various domains, including photonics, acoustics and electronics. However, EPs have mainly been realized based on the degeneracy of resonances of physical systems; distinct degeneracies occur relating to the absorption properties of waves, with distinct physical manifestations. Here we demonstrate this physically dif…
▽ More
The past few years have witnessed growing interests in exceptional points (EPs) in various domains, including photonics, acoustics and electronics. However, EPs have mainly been realized based on the degeneracy of resonances of physical systems; distinct degeneracies occur relating to the absorption properties of waves, with distinct physical manifestations. Here we demonstrate this physically different kind of exceptional point, by engineering degeneracies in the absorption spectrum of optical microcavities with dissipation. We experimentally distinguish the conditions to realize a resonant EP and an absorbing EP. Furthermore, when the optical loss is optimized to achieve perfect absorption at such an EP, we observe an anomalously broadened lineshape in the absorption spectra, as predicted by theory. The distinct scattering properties enabled by this type of EP creates new opportunities for both the fundamental study and applications of non-Hermitian singularities.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Maximal Poisson-disk Sampling for Variable Resolution Conforming Delaunay Mesh Generation: Applications for Three-Dimensional Discrete Fracture Networks and the Surrounding Volume
Authors:
Johannes Krotz,
Matthew R. Sweeney,
Carl W. Gable,
Jeffrey D. Hyman,
Juan M. Restrepo
Abstract:
We propose a two-stage algorithm for generating Delaunay triangulations in 2D and Delaunay tetrahedra in 3D that employs near maximal Poisson-disk sampling. The method generates a variable resolution mesh in 2- and 3-dimensions in linear run time. The effectiveness of the algorithm is demonstrated by generating an unstructured 3D mesh on a discrete fracture network (DFN). Even though Poisson-disk…
▽ More
We propose a two-stage algorithm for generating Delaunay triangulations in 2D and Delaunay tetrahedra in 3D that employs near maximal Poisson-disk sampling. The method generates a variable resolution mesh in 2- and 3-dimensions in linear run time. The effectiveness of the algorithm is demonstrated by generating an unstructured 3D mesh on a discrete fracture network (DFN). Even though Poisson-disk sampling methods do not provide triangulation quality bounds in more than two-dimensions, we found that low quality tetrahedra are infrequent enough and could be successfully removed to obtain high quality balanced three-dimensional meshes with topologically acceptable tetrahedra.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Electromagnetic Eigenvalue Problems and Nonhermitian Effects in Linear and Saturable Scattering
Authors:
William R. Sweeney
Abstract:
In this thesis we address a series of new problems in non-hermitian optical scattering with increasing degrees of complexity.
We develop the theory of reflectionless scattering modes, introducing a novel and broad class of impedance-matched eigenproblems: for a given structure, find the incident wavefronts and frequencies which are not partially reflected, but are instead transmitted through the…
▽ More
In this thesis we address a series of new problems in non-hermitian optical scattering with increasing degrees of complexity.
We develop the theory of reflectionless scattering modes, introducing a novel and broad class of impedance-matched eigenproblems: for a given structure, find the incident wavefronts and frequencies which are not partially reflected, but are instead transmitted through the scatterer, or dissipated within it. We analyze the relevant symmetry properties, and find that they support exceptional points (EPs) which can be directly probed with steady-state excitation.
We study degenerate coherent perfect absorption (CPA EP), which is a specific example of the new kind of EP mentioned above. We show that the CPA EP is chiral in a ring resonator, and use this to design a resonator which predominantly absorbs or reflects light, depending on the direction of incidence.
We extend CPA from cavities with a linear dielectric response to include the saturating nonlinearity and dispersion of a two-level absorbing medium. We show that the SALT algorithm in the single-mode regime can also be used to find the saturable CPA modes through a simple map**. We also clarify the bad-cavity limit of dispersive but linear CPA, identifying new modes that are hybrids of the cavity and atomic degrees of freedom.
We present and solve the general problem of scattering from an arbitrary cavity with a saturable two-level amplifying or absorbing medium, generalizing the known phenomenology of bistability that has mainly been studied in structures with little or no spatial complexity. We carefully analyze the validity of approximations used for isolated resonances, and find that the previously used inverse single-pole approximation requires some modification for the case of scattering.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Reflectionless excitation of arbitrary photonic structures: A general theory
Authors:
A. Douglas Stone,
William R. Sweeney,
Chia Wei Hsu,
Kabish Wisal,
Zeyu Wang
Abstract:
We outline a recently developed theory of impedance-matching, or reflectionless excitation of arbitrary finite photonic structures in any dimension. It describes the necessary and sufficient conditions for perfectly reflectionless excitation to be possible, and specifies how many physical parameters must be tuned to achieve this. In the absence of geometric symmetries the tuning of at least one st…
▽ More
We outline a recently developed theory of impedance-matching, or reflectionless excitation of arbitrary finite photonic structures in any dimension. It describes the necessary and sufficient conditions for perfectly reflectionless excitation to be possible, and specifies how many physical parameters must be tuned to achieve this. In the absence of geometric symmetries the tuning of at least one structural parameter will be necessary to achieve reflectionless excitation. The theory employs a recently identified set of complex-frequency solutions of the Maxwell equations as a starting point, which are defined by having zero reflection into a chosen set of input channels, and which are referred to as R-zeros. Tuning is generically necessary in order to move an R-zero to the real-frequency axis, where it becomes a physical steady-state solution, referred to as a Reflectionless Scattering Mode (RSM). Except in single-channel systems, the RSM corresponds to a particular input wavefront, and any other wavefront will generally not be reflectionless. In a structure with parity and time-reversal symmmetry or with parity-time symmetry, generically a subset of R-zeros is real, and reflectionless states exist without structural tuning. Such systems can exhibit symmetry-breaking transitions when two RSMs meet, which corresponds to a recently identified kind of exceptional point at which the shape of the reflection and transmission resonance lineshape is flattened.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Hybrid deep learning architecture for general disruption prediction across tokamaks
Authors:
J. X. Zhu,
C. Rea,
K. Montes,
R. S. Granetz,
R. Sweeney,
R. A. Tinguely
Abstract:
In this paper, we present a new deep learning disruption prediction algorithm based on important findings from explorative data analysis which effectively allows knowledge transfer from existing devices to new ones, thereby predicting disruptions using very limited disruptive data from the new devices. The explorative data analysis conducted via unsupervised clustering techniques confirms that tim…
▽ More
In this paper, we present a new deep learning disruption prediction algorithm based on important findings from explorative data analysis which effectively allows knowledge transfer from existing devices to new ones, thereby predicting disruptions using very limited disruptive data from the new devices. The explorative data analysis conducted via unsupervised clustering techniques confirms that time-sequence data are much better separators of disruptive and non-disruptive behavior than the instantaneous plasma state data with further advantageous implications for a sequence-based predictor. Based on such important findings, we have designed a new algorithm for multi-machine disruption prediction that achieves high predictive accuracy on the C-Mod (AUC=0.801), DIII-D (AUC=0.947) and EAST (AUC=0.973) tokamaks with limited hyperparameter tuning. Through numerical experiments, we show that boosted accuracy (AUC=0.959) is achieved on EAST predictions by including in the training only 20 disruptive discharges, thousands of non-disruptive discharges from EAST, and combining this with more than a thousand discharges from DIII-D and C-Mod. The improvement of predictive ability obtained by combining disruptive data from other devices is found to be true for all permutations of the three devices. Furthermore, by comparing the predictive performance of each individual numerical experiment, we find that non-disruptive data are machine-specific while disruptive data from multiple devices contain device-independent knowledge that can be used to inform predictions for disruptions occurring on a new device.
△ Less
Submitted 26 November, 2020; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Theory of reflectionless scattering modes
Authors:
William R. Sweeney,
Chia Wei Hsu,
A. Douglas Stone
Abstract:
We develop the theory of a special type of scattering state in which a set of asymptotic channels are chosen as inputs and the complementary set as outputs, and there is zero reflection back into the input channels. In general an infinite number of such solutions exist at discrete complex frequencies. Our results apply to linear electromagnetic and acoustic wave scattering and also to quantum scat…
▽ More
We develop the theory of a special type of scattering state in which a set of asymptotic channels are chosen as inputs and the complementary set as outputs, and there is zero reflection back into the input channels. In general an infinite number of such solutions exist at discrete complex frequencies. Our results apply to linear electromagnetic and acoustic wave scattering and also to quantum scattering, in all dimensions, for arbitrary geometries including scatterers in free space, and for any choice of the input/output sets. We refer to such a state as reflection-zero (R-zero) when it occurs off the real-frequency axis and as an Reflectionless Scattering Mode (RSM) when it is tuned to a real frequency as a steady-state solution. Such reflectionless behavior requires a specific monochromatic input wavefront, given by the eigenvector of a filtered scattering matrix with eigenvalue zero. Steady-state RSMs may be realized by index tuning which do not break flux conservation or by gain-loss tuning. RSMs of flux-conserving cavities are bidirectional while those of non-flux-conserving cavities are generically unidirectional. Cavities with ${\cal PT}$-symmetry have unidirectional R-zeros in complex-conjugate pairs, implying that reflectionless states naturally arise at real frequencies for small gain-loss parameter but move into the complex-frequency plane after a spontaneous ${\cal PT}$-breaking transition. Numerical examples of RSMs are given for one-dimensional cavities with and without gain/loss, a ${\cal PT}$ cavity, a two-dimensional multiwaveguide junction, and a two-dimensional deformed dielectric cavity in free space. We outline and implement a general technique for solving such problems, which shows promise for designing photonic structures which are perfectly impedance-matched for specific inputs, or can perfectly convert inputs from one set of modes to a complementary set.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
An application of survival analysis to disruption prediction via Random Forests
Authors:
R. A. Tinguely,
K. J. Montes,
C. Rea,
R. Sweeney,
R. S. Granetz
Abstract:
One of the most pressing challenges facing the fusion community is adequately mitigating or, even better, avoiding disruptions of tokamak plasmas. However, before this can be done, disruptions must first be predicted with sufficient warning time to actuate a response. The established field of survival analysis provides a convenient statistical framework for time-to-event (i.e. time-to-disruption)…
▽ More
One of the most pressing challenges facing the fusion community is adequately mitigating or, even better, avoiding disruptions of tokamak plasmas. However, before this can be done, disruptions must first be predicted with sufficient warning time to actuate a response. The established field of survival analysis provides a convenient statistical framework for time-to-event (i.e. time-to-disruption) studies. This paper demonstrates the integration of an existing disruption prediction machine learning algorithm with the Kaplan-Meier estimator of survival probability. Specifically discussed are the implied warning times from binary classification of disruption databases and the interpretation of output signals from Random Forest algorithms trained and tested on these databases. This survival analysis approach is applied to both smooth and noisy test data to highlight important features of the survival and hazard functions. In addition, this method is applied to three Alcator C-Mod plasma discharges and compared to a threshold-based scheme for triggering alarms. In one case, both techniques successfully predict the disruption; although, in another, neither warns of the impending disruption with enough time to mitigate. For the final discharge, the survival analysis approach could avoid the false alarm triggered by the threshold method. Limitations of this analysis and opportunities for future work are also presented.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
Adversarial Mahalanobis Distance-based Attentive Song Recommender for Automatic Playlist Continuation
Authors:
Thanh Tran,
Renee Sweeney,
Kyumin Lee
Abstract:
In this paper, we aim to solve the automatic playlist continuation (APC) problem by modeling complex interactions among users, playlists, and songs using only their interaction data. Prior methods mainly rely on dot product to account for similarities, which is not ideal as dot product is not metric learning, so it does not convey the important inequality property. Based on this observation, we pr…
▽ More
In this paper, we aim to solve the automatic playlist continuation (APC) problem by modeling complex interactions among users, playlists, and songs using only their interaction data. Prior methods mainly rely on dot product to account for similarities, which is not ideal as dot product is not metric learning, so it does not convey the important inequality property. Based on this observation, we propose three novel deep learning approaches that utilize Mahalanobis distance. Our first approach uses user-playlist-song interactions, and combines Mahalanobis distance scores between (i) a target user and a target song, and (ii) between a target playlist and the target song to account for both the user's preference and the playlist's theme. Our second approach measures song-song similarities by considering Mahalanobis distance scores between the target song and each member song (i.e., existing song) in the target playlist. The contribution of each distance score is measured by our proposed memory metric-based attention mechanism. In the third approach, we fuse the two previous models into a unified model to further enhance their performance. In addition, we adopt and customize Adversarial Personalized Ranking (APR) for our three approaches to further improve their robustness and predictive capabilities. Through extensive experiments, we show that our proposed models outperform eight state-of-the-art models in two large-scale real-world datasets.
△ Less
Submitted 8 June, 2019;
originally announced June 2019.
-
Multilevel Graph Partitioning for Three-Dimensional Discrete Fracture Network Flow Simulations
Authors:
Hayato Ushijima-Mwesigwa,
Jeffrey D. Hyman,
Aric Hagberg,
Ilya Safro,
Satish Karra,
Carl W. Gable,
Matthew R. Sweeney,
Gowri Srinivasan
Abstract:
We present a topology-based method for mesh-partitioning in three-dimensional discrete fracture network (DFN) simulations that take advantage of the intrinsic multi-level nature of a DFN. DFN models are used to simulate flow and transport through low-permeability fractured media in the subsurface by explicitly representing fractures as discrete entities. The governing equations for flow and transp…
▽ More
We present a topology-based method for mesh-partitioning in three-dimensional discrete fracture network (DFN) simulations that take advantage of the intrinsic multi-level nature of a DFN. DFN models are used to simulate flow and transport through low-permeability fractured media in the subsurface by explicitly representing fractures as discrete entities. The governing equations for flow and transport are numerically integrated on computational meshes generated on the interconnected fracture networks. Modern high-fidelity DFN simulations require high-performance computing on multiple processors where performance and scalability depend partially on obtaining a high-quality partition of the mesh to balance work-loads and minimize communication across all processors. The discrete structure of a DFN naturally lends itself to various graph representations. We develop two applications of the multilevel graph partitioning algorithm to partition the mesh of a DFN. In the first, we project a partition of the graph based on the DFN topology onto the mesh of the DFN and in the second, this projection is used as the initial condition for further partitioning refinement of the mesh. We compare the performance of these methods with standard multi-level graph partitioning using graph-based metrics (cut, imbalance, partitioning time), computational-based metrics (FLOPS, iterations, solver time), and total run time. The DFN-based and the mesh-based partitioning methods are comparable in terms of the graph-based metrics, but the time required to obtain the partition is several orders of magnitude faster using the DFN-based partitions. In combination, these partitions are several orders of magnitude faster than the mesh-based partition. In turn, this hybrid method outperformed both of the other methods in terms of the total run time.
△ Less
Submitted 1 April, 2021; v1 submitted 18 February, 2019;
originally announced February 2019.
-
Perfectly absorbing exceptional points and chiral absorbers
Authors:
William R. Sweeney,
Chia Wei Hsu,
Stefan Rotter,
A. Douglas Stone
Abstract:
We identify a new kind of physically realizable exceptional point (EP) corresponding to degenerate coherent perfect absorption, in which two purely incoming solutions of the wave operator for electromagnetic or acoustic waves coalesce to a single state. Such non-hermitian degeneracies can occur at a real-valued frequency without any associated noise or non-linearity, in contrast to EPs in lasers.…
▽ More
We identify a new kind of physically realizable exceptional point (EP) corresponding to degenerate coherent perfect absorption, in which two purely incoming solutions of the wave operator for electromagnetic or acoustic waves coalesce to a single state. Such non-hermitian degeneracies can occur at a real-valued frequency without any associated noise or non-linearity, in contrast to EPs in lasers. The absorption lineshape for the eigenchannel near the EP is quartic in frequency around its maximum in any dimension. In general, for the parameters at which an operator EP occurs, the associated scattering matrix does not have an EP. However, in one dimension, when the $S$-matrix does have a perfectly absorbing EP, it takes on a universal one-parameter form with degenerate values for all scattering coefficients. For absorbing disk resonators, these EPs give rise to chiral absorption: perfect absorption for only one sense of rotation of the input wave.
△ Less
Submitted 25 July, 2018; v1 submitted 23 July, 2018;
originally announced July 2018.
-
Feedforward and feedback control of locked mode phase and rotation in DIII-D with application to modulated ECCD experiments
Authors:
Wilkie Choi,
R. J. La Haye,
M. J. Lanctot,
K. E. J. Olofsson,
E. J. Strait,
R. Sweeney,
F. A. Volpe
Abstract:
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. A…
▽ More
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. Additionally, for the first time, the phase of the perturbation was optimized in real-time, in feedback with magnetic measurements, in order for the mode's phase to closely match a prescribed phase, as a function of time. Experimental results confirm the capability to hold the mode in a given fixed-phase or to rotate it at up to 20 Hz with good uniformity. The control coil currents utilized in the experiments agree with the requirements estimated by an electromechanical model. Moreover, controlled rotation at 20 Hz was combined with Electron Cyclotron Current Drive (ECCD) modulated at the same frequency. This is simpler than regulating the ECCD modulation in feedback with spontaneous mode rotation, and enables repetitive, reproducible ECCD deposition at or near the island O-point, X-point and locations in between, for careful studies of how this affects the island stability. Current drive was found to be radially misaligned relative to the island, and resulting growth and shrinkage of islands matched expectations of the Modified Rutherford Equation for some discharges presented here. Finally, simulations predict the as designed ITER 3D coils can entrain a small island at sub-10 Hz frequencies.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
How do fishery policies affect Hawaii's longline fishing industry? Calibrating a positive mathematical programming model
Authors:
Jonathan R. Sweeney,
Richard E. Howitt,
Hing Ling Chan,
Minling Pan,
**Sun Leung
Abstract:
We present a vessel and target-specific positive mathematical programming model (PMP) for Hawaii's longline fishing fleet. Although common in agricultural economics, PMP modeling is rarely attempted in fisheries. To demonstrate the flexibility of the PMP framework, we separate tuna and swordfish production technologies into three policy relevant fishing targets. We find the model most accurately p…
▽ More
We present a vessel and target-specific positive mathematical programming model (PMP) for Hawaii's longline fishing fleet. Although common in agricultural economics, PMP modeling is rarely attempted in fisheries. To demonstrate the flexibility of the PMP framework, we separate tuna and swordfish production technologies into three policy relevant fishing targets. We find the model most accurately predicts vessel-specific annual bigeye catch in the WCPO, with an accuracy of 12% to 35%, and a correlation between 0.30 and 0.53. To demonstrate the model's usefulness to policy makers, we simulate the economic impact to individual vessels from increasing and decreasing the bigeye catch limit in the WCPO by 10%. Our results suggest that such policy changes will have moderate impacts on most vessels, but large impacts on a few generating a fat tailed distribution. These results offer insights into the range of winners and losers resulting from changes in fishery policies, and therefore, which policies are more likely to gain widespread industry support. As a tool for fishery management, the calibrated PMP model offers a flexible and easy-to-use framework, capable of capturing the heterogeneous response of fishing vessels to evaluate policy changes.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
Statistical analysis of $m/n$ = 2/1 locked and quasi-stationary modes with rotating precursors at DIII-D
Authors:
R. Sweeney,
W. Choi,
R. J. La Haye,
S. Mao,
K. E. J. Olofsson,
F. A. Volpe,
the DIII-D Team
Abstract:
A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A para…
▽ More
A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A parameter formulated by the plasma internal inductance $l_i$ divided by the safety factor at 95% of the poloidal flux, $q_{95}$, is found to exhibit predictive capability over whether a locked mode will cause a disruption or not, and does so up to hundreds of milliseconds before the disruption. Within 20 ms of the disruption, the shortest distance between the island separatrix and the unperturbed last closed flux surface, referred to as $d_{edge}$, performs comparably to $l_i/q_{95}$ in its ability to discriminate disruptive locked modes. Out of all parameters considered, $d_{edge}$ also correlates best with the duration of the locked mode. Within 50 ms of a locked mode disruption, average behavior includes exponential growth of the $n=1$ perturbed field, which might be due to the 2/1 locked mode. Even assuming the aforementioned 2/1 growth, disruptivity following a locked mode shows little dependence on island width up to 20 ms before the disruption. Separately, greater deceleration of the rotating precursor is observed when the wall torque is large. At locking, modes are often observed to align with a residual error field. Timescales associated with the mode evolution are also studied and dictate the response times necessary for disruption avoidance and mitigation.
△ Less
Submitted 28 November, 2016; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Local measurement of error field using naturally rotating tearing mode dynamics in EXTRAP T2R
Authors:
R. M. Sweeney,
L. Frassinetti,
P. Brunsell,
R. Fridström,
F. A. Volpe
Abstract:
An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular…
▽ More
An error field (EF) detection technique using the amplitude modulation of a naturally rotating tearing mode (TM) is developed and validated in the EXTRAP T2R reversed field pinch. The technique was used to identify intrinsic EFs of $m/n = 1/-12$, where $m$ and $n$ are the poloidal and toroidal mode numbers. The effect of the EF and of a resonant magnetic perturbation (RMP) on the TM, in particular on amplitude modulation, is modeled with a first-order solution of the Modified Rutherford Equation. In the experiment, the TM amplitude is measured as a function of the toroidal angle as the TM rotates rapidly in the presence of an unknown EF and a known, deliberately applied RMP. The RMP amplitude is fixed while the toroidal phase is varied from one discharge to the other, completing a full toroidal scan. Using three such scans with different RMP amplitudes, the EF amplitude and phase are inferred from the phases at which the TM amplitude maximizes. The estimated EF amplitude is consistent with other estimates (e.g. based on the best EF-cancelling RMP, resulting in the fastest TM rotation). A passive variant of this technique is also presented, where no RMPs are applied, and the EF phase is deduced.
△ Less
Submitted 4 June, 2016; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Proto-CIRCUS Tilted-Coil Tokamak-Torsatron Hybrid: Design and Construction
Authors:
A. W. Clark,
M. Doumet,
K. C. Hammond,
Y. Kornbluth,
D. A. Spong,
R. Sweeney,
F. A. Volpe
Abstract:
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-l…
▽ More
We present the field-line modeling, design and construction of a prototype circular-coil tokamak-torsatron hybrid called Proto-CIRCUS. The device has a major radius R = 16 cm and minor radius a < 5 cm. The six "toroidal field" coils are planar as in a tokamak, but they are tilted. This, combined with induced or driven plasma current, is expected to generate rotational transform, as seen in field-line tracing and equilibrium calculations. The device is expected to operate at lower plasma current than a tokamak of comparable size and magnetic field, which might have interesting implications for disruptions and steady-state operation. Additionally, the toroidal magnetic ripple is less pronounced than in an equivalent tokamak in which the coils are not tilted. The tilted coils are interlocked, resulting in a relatively low aspect ratio, and can be moved, both radially and in tilt angle, between discharges. This capability will be exploited for detailed comparisons between calculations and field-line map** measurements. Such comparisons will reveal whether this relatively simple concept can generate the expected rotational transform.
△ Less
Submitted 8 October, 2014;
originally announced October 2014.