-
Topological photon pum** in quantum optical systems
Authors:
Mathias B. M. Svendsen,
Marcel Cech,
Max Schemmer,
Beatriz Olmos
Abstract:
We establish the concept of topological pum** in one-dimensional systems with long-range interactions and apply it to the transport of a photon in quantum optical systems. In our theoretical investigation, we introduce an extended version of the Rice-Mele model with all-to-all exchange interactions. By analyzing its properties, we identify the general conditions for topological pum** and demon…
▽ More
We establish the concept of topological pum** in one-dimensional systems with long-range interactions and apply it to the transport of a photon in quantum optical systems. In our theoretical investigation, we introduce an extended version of the Rice-Mele model with all-to-all exchange interactions. By analyzing its properties, we identify the general conditions for topological pum** and demonstrate the topologically protected and dispersionless transport of a photon on a one-dimensional emitter chain. As concrete examples, we investigate three different popular quantum optics platforms, namely Rydberg atom lattices, dense lattices of atoms excited to low-lying electronic states, and atoms coupled to waveguides, using experimentally relevant parameters. We observe that despite the long-ranged character of the dipole-dipole interactions, topological pum** facilitates the transport of a photon with a fidelity per cycle which can reach 99.9%. Moreover, we find that the photon pum** process remains topologically protected against local disorder in the coupling rates.
△ Less
Submitted 2 May, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Deployment of Deep Learning Model in Real World Clinical Setting: A Case Study in Obstetric Ultrasound
Authors:
Chun Kit Wong,
Mary Ngo,
Manxi Lin,
Zahra Bashir,
Amihai Heen,
Morten Bo Søndergaard Svendsen,
Martin Grønnebæk Tolsgaard,
Anders Nymark Christensen,
Aasa Feragen
Abstract:
Despite the rapid development of AI models in medical image analysis, their validation in real-world clinical settings remains limited. To address this, we introduce a generic framework designed for deploying image-based AI models in such settings. Using this framework, we deployed a trained model for fetal ultrasound standard plane detection, and evaluated it in real-time sessions with both novic…
▽ More
Despite the rapid development of AI models in medical image analysis, their validation in real-world clinical settings remains limited. To address this, we introduce a generic framework designed for deploying image-based AI models in such settings. Using this framework, we deployed a trained model for fetal ultrasound standard plane detection, and evaluated it in real-time sessions with both novice and expert users. Feedback from these sessions revealed that while the model offers potential benefits to medical practitioners, the need for navigational guidance was identified as a key area for improvement. These findings underscore the importance of early deployment of AI models in real-world settings, leading to insights that can guide the refinement of the model and system based on actual user feedback.
△ Less
Submitted 22 March, 2024;
originally announced April 2024.
-
Diffusion-based Iterative Counterfactual Explanations for Fetal Ultrasound Image Quality Assessment
Authors:
Paraskevas Pegios,
Manxi Lin,
Nina Weng,
Morten Bo Søndergaard Svendsen,
Zahra Bashir,
Siavash Bigdeli,
Anders Nymark Christensen,
Martin Tolsgaard,
Aasa Feragen
Abstract:
Obstetric ultrasound image quality is crucial for accurate diagnosis and monitoring of fetal health. However, producing high-quality standard planes is difficult, influenced by the sonographer's expertise and factors like the maternal BMI or the fetus dynamics. In this work, we propose using diffusion-based counterfactual explainable AI to generate realistic high-quality standard planes from low-q…
▽ More
Obstetric ultrasound image quality is crucial for accurate diagnosis and monitoring of fetal health. However, producing high-quality standard planes is difficult, influenced by the sonographer's expertise and factors like the maternal BMI or the fetus dynamics. In this work, we propose using diffusion-based counterfactual explainable AI to generate realistic high-quality standard planes from low-quality non-standard ones. Through quantitative and qualitative evaluation, we demonstrate the effectiveness of our method in producing plausible counterfactuals of increased quality. This shows future promise both for enhancing training of clinicians by providing visual feedback, as well as for improving image quality and, consequently, downstream diagnosis and monitoring.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Shortcut Learning in Medical Image Segmentation
Authors:
Manxi Lin,
Nina Weng,
Kamil Mikolaj,
Zahra Bashir,
Morten Bo Søndergaard Svendsen,
Martin Tolsgaard,
Anders Nymark Christensen,
Aasa Feragen
Abstract:
Shortcut learning is a phenomenon where machine learning models prioritize learning simple, potentially misleading cues from data that do not generalize well beyond the training set. While existing research primarily investigates this in the realm of image classification, this study extends the exploration of shortcut learning into medical image segmentation. We demonstrate that clinical annotatio…
▽ More
Shortcut learning is a phenomenon where machine learning models prioritize learning simple, potentially misleading cues from data that do not generalize well beyond the training set. While existing research primarily investigates this in the realm of image classification, this study extends the exploration of shortcut learning into medical image segmentation. We demonstrate that clinical annotations such as calipers, and the combination of zero-padded convolutions and center-cropped training sets in the dataset can inadvertently serve as shortcuts, impacting segmentation accuracy. We identify and evaluate the shortcut learning on two different but common medical image segmentation tasks. In addition, we suggest strategies to mitigate the influence of shortcut learning and improve the generalizability of the segmentation models. By uncovering the presence and implications of shortcuts in medical image segmentation, we provide insights and methodologies for evaluating and overcoming this pervasive challenge and call for attention in the community for shortcuts in segmentation. Our code is public at https://github.com/nina-weng/shortcut_skinseg .
△ Less
Submitted 27 June, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Learning semantic image quality for fetal ultrasound from noisy ranking annotation
Authors:
Manxi Lin,
Jakob Ambsdorf,
Emilie Pi Fogtmann Sejer,
Zahra Bashir,
Chun Kit Wong,
Paraskevas Pegios,
Alberto Raheli,
Morten Bo Søndergaard Svendsen,
Mads Nielsen,
Martin Grønnebæk Tolsgaard,
Anders Nymark Christensen,
Aasa Feragen
Abstract:
We introduce the notion of semantic image quality for applications where image quality relies on semantic requirements. Working in fetal ultrasound, where ranking is challenging and annotations are noisy, we design a robust coarse-to-fine model that ranks images based on their semantic image quality and endow our predicted rankings with an uncertainty estimate. To annotate rankings on training dat…
▽ More
We introduce the notion of semantic image quality for applications where image quality relies on semantic requirements. Working in fetal ultrasound, where ranking is challenging and annotations are noisy, we design a robust coarse-to-fine model that ranks images based on their semantic image quality and endow our predicted rankings with an uncertainty estimate. To annotate rankings on training data, we design an efficient ranking annotation scheme based on the merge sort algorithm. Finally, we compare our ranking algorithm to a number of state-of-the-art ranking algorithms on a challenging fetal ultrasound quality assessment task, showing the superior performance of our method on the majority of rank correlation metrics.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
An Automatic Guidance and Quality Assessment System for Doppler Imaging of Umbilical Artery
Authors:
Chun Kit Wong,
Manxi Lin,
Alberto Raheli,
Zahra Bashir,
Morten Bo Søndergaard Svendsen,
Martin Grønnebæk Tolsgaard,
Aasa Feragen,
Anders Nymark Christensen
Abstract:
Examination of the umbilical artery with Doppler ultrasonography is performed to investigate blood supply to the fetus through the umbilical cord, which is vital for the monitoring of fetal health. Such examination involves several steps that must be performed correctly: identifying suitable sites on the umbilical artery for the measurement, acquiring the blood flow curve in the form of a Doppler…
▽ More
Examination of the umbilical artery with Doppler ultrasonography is performed to investigate blood supply to the fetus through the umbilical cord, which is vital for the monitoring of fetal health. Such examination involves several steps that must be performed correctly: identifying suitable sites on the umbilical artery for the measurement, acquiring the blood flow curve in the form of a Doppler spectrum, and ensuring compliance to a set of quality standards. These steps rely heavily on the operator's skill, and the shortage of experienced sonographers has thus created a demand for machine assistance. In this work, we propose an automatic system to fill the gap. By using a modified Faster R-CNN network, we obtain an algorithm that can suggest locations suitable for Doppler measurement. Meanwhile, we have also developed a method for assessment of the Doppler spectrum's quality. The proposed system is validated on 657 images from a national ultrasound screening database, with results demonstrating its potential as a guidance system.
△ Less
Submitted 6 July, 2023; v1 submitted 11 April, 2023;
originally announced April 2023.
-
Removing confounding information from fetal ultrasound images
Authors:
Kamil Mikolaj,
Manxi Lin,
Zahra Bashir,
Morten Bo Søndergaard Svendsen,
Martin Tolsgaard,
Anders Nymark,
Aasa Feragen
Abstract:
Confounding information in the form of text or markings embedded in medical images can severely affect the training of diagnostic deep learning algorithms. However, data collected for clinical purposes often have such markings embedded in them. In dermatology, known examples include drawings or rulers that are overrepresented in images of malignant lesions. In this paper, we encounter text and cal…
▽ More
Confounding information in the form of text or markings embedded in medical images can severely affect the training of diagnostic deep learning algorithms. However, data collected for clinical purposes often have such markings embedded in them. In dermatology, known examples include drawings or rulers that are overrepresented in images of malignant lesions. In this paper, we encounter text and calipers placed on the images found in national databases containing fetal screening ultrasound scans, which correlate with standard planes to be predicted. In order to utilize the vast amounts of data available in these databases, we develop and validate a series of methods for minimizing the confounding effects of embedded text and calipers on deep learning algorithms designed for ultrasound, using standard plane classification as a test case.
△ Less
Submitted 24 March, 2023;
originally announced March 2023.
-
Modified dipole-dipole interactions in the presence of a nanophotonic waveguide
Authors:
Mathias B. M. Svendsen,
Beatriz Olmos
Abstract:
When an emitter ensemble interacts with the electromagnetic field, dipole-dipole interactions are induced between the emitters. The magnitude and shape of these interactions are fully determined by the specific form of the electromagnetic field modes. If the emitters are placed in the vicinity of a nanophotonic waveguide, such as a cylindrical nanofiber, the complex functional form of these modes…
▽ More
When an emitter ensemble interacts with the electromagnetic field, dipole-dipole interactions are induced between the emitters. The magnitude and shape of these interactions are fully determined by the specific form of the electromagnetic field modes. If the emitters are placed in the vicinity of a nanophotonic waveguide, such as a cylindrical nanofiber, the complex functional form of these modes makes the analytical evaluation of the dipole-dipole interaction cumbersome and numerically costly. In this work, we provide a full detailed description of how to successfully calculate these interactions, outlining a method that can be easily extended to other environments and boundary conditions. Such exact evaluation is of importance as, due to the collective character of the interactions and dissipation in this kind of systems, any small modification of the interactions may lead to dramatic changes in experimental observables, particularly as the number of emitters increases. We illustrate this by calculating the transmission signal of the light guided by a cylindrical nanofiber in the presence of a nearby chain of emitters.
△ Less
Submitted 18 August, 2023; v1 submitted 24 November, 2022;
originally announced November 2022.
-
Comparison of two artificial neural networks trained for the surrogate modeling of stress in materially heterogeneous elastoplastic solids
Authors:
Sarthak Kapoor,
Jaber Rezaei Mianroodi,
Mohammad Khorrami,
Nima S. Siboni,
Bob Svendsen
Abstract:
The purpose of this work is the systematic comparison of the application of two artificial neural networks (ANNs) to the surrogate modeling of the stress field in materially heterogeneous periodic polycrystalline microstructures. The first ANN is a UNet-based convolutional neural network (CNN) for periodic data, and the second is based on Fourier neural operators (FNO). Both of these were trained,…
▽ More
The purpose of this work is the systematic comparison of the application of two artificial neural networks (ANNs) to the surrogate modeling of the stress field in materially heterogeneous periodic polycrystalline microstructures. The first ANN is a UNet-based convolutional neural network (CNN) for periodic data, and the second is based on Fourier neural operators (FNO). Both of these were trained, validated, and tested with results from the numerical solution of the boundary-value problem (BVP) for quasi-static mechanical equilibrium in periodic grain microstructures with square domains. More specifically, these ANNs were trained to correlate the spatial distribution of material properties with the equilibrium stress field under uniaxial tensile loading. The resulting trained ANNs (tANNs) calculate the stress field for a given microstructure on the order of 1000 (UNet) to 2500 (FNO) times faster than the numerical solution of the corresponding BVP.
For microstructures in the test dataset, the FNO-based tANN, or simply FNO, is more accurate than its UNet-based counterpart; the normalized mean absolute error of different stress components for the former is 0.25-0.40% as compared to 1.41-2.15% for the latter. Errors in FNO are restricted to grain boundary regions, whereas the error in U-Net also comes from within the grain. In comparison to U-Net, errors in FNO are more robust to large variations in spatial resolution as well as small variations in grain density. On other hand, errors in U-Net are robust to variations in boundary box aspect ratio, whereas errors in FNO increase as the domain becomes rectangular. Both tANNs are however unable to reproduce strong stress gradients, especially around regions of stress concentration.
△ Less
Submitted 30 October, 2022;
originally announced October 2022.
-
An artificial neural network for surrogate modeling of stress fields in viscoplastic polycrystalline materials
Authors:
Mohammad S. Khorrami,
Jaber R. Mianroodi,
Nima H. Siboni,
Pawan Goyal,
Bob Svendsen,
Peter Benner,
Dierk Raabe
Abstract:
The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress fie…
▽ More
The purpose of this work is the development of an artificial neural network (ANN) for surrogate modeling of the mechanical response of viscoplastic grain microstructures. To this end, a U-Net-based convolutional neural network (CNN) is trained to account for the history dependence of the material behavior. The training data take the form of numerical simulation results for the von Mises stress field under quasi-static tensile loading. The trained CNN (tCNN) can accurately reproduce both the average response as well as the local von Mises stress field. The tCNN calculates the von Mises stress field of grain microstructures not included in the training dataset about 500 times faster than its calculation based on the numerical solution with a spectral solver of the corresponding initial-boundary-value problem. The tCNN is also successfully applied to other types of microstructure morphologies (e.g., matrix-inclusion type topologies) and loading levels not contained in the training dataset.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Combined modeling and experimental characterization of Mn segregation and spinodal decomposition along dislocation lines in Fe-Mn alloys
Authors:
Jaber Rezaei Mianroodi,
Pratheek Shanthraj,
Alisson Kwiatkowski da Silva,
Bob Svendsen,
Dierk Raabe
Abstract:
Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based poten…
▽ More
Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic phase-field chemomechanics (MPFCM) and Monte Carlo molecular dynamics (MCMD) are employed. MPFCM calibration is carried out with the same Fe-Mn MEAM-based potential used in MCMD, as well as CALPHAD data. Simulation results for Mn segregation to, and spinodal decomposition along, straight screw and edge dislocations as well as dislocation loops, are compared with characterization results from atom probe tomography (APT) for two Fe-Mn alloy compositions. In contrast to classical Volterra dislocation theory, both MPFCM and MCMD predict a non-zero hydrostatic stress field in screw cores. Being of much smaller magnitude than the hydrostatic stress in straight edge cores, much less solute segregates to screw than to edge cores. In addition, the segregated amount in screw cores is below the critical concentration of 0.157 for the onset of spinodal decomposition along the line. Results from MPFCM-based modeling imply that the concentration dependence of the solute misfit distortion and resulting dependence of the elastic energy density on concentration have the strongest effect. The maximum amount of Mn segregating to straight edge dislocations predicted by MPFCM agrees well with APT results. The MPFCM model for Fe-Mn predicts little or no variation in Mn concentration along a straight dislocation line, in contrast to the APT results. As shown by the example of a dislocation loop in the current work, a change in the hydrostatic stress along the line due to changing character of dislocation does lead to a corresponding variation in Mn concentration. Such a variation in Mn concentration can also then be expected along a dislocation line with kinks or jogs.
△ Less
Submitted 8 June, 2022;
originally announced June 2022.
-
Accelerating phase-field-based simulation via machine learning
Authors:
Iman Peivaste,
Nima H. Siboni,
Ghasem Alahyarizadeh,
Reza Ghaderi,
Bob Svendsen,
Dierk Raabe,
Jaber R. Mianroodi
Abstract:
Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the cur…
▽ More
Phase-field-based models have become common in material science, mechanics, physics, biology, chemistry, and engineering for the simulation of microstructure evolution. Yet, they suffer from the drawback of being computationally very costly when applied to large, complex systems. To reduce such computational costs, a Unet-based artificial neural network is developed as a surrogate model in the current work. Training input for this network is obtained from the results of the numerical solution of initial-boundary-value problems (IBVPs) based on the Fan-Chen model for grain microstructure evolution. In particular, about 250 different simulations with varying initial order parameters are carried out and 200 frames of the time evolution of the phase fields are stored for each simulation. The network is trained with 90% of this data, taking the $i$-th frame of a simulation, i.e. order parameter field, as input, and producing the $(i+1)$-th frame as the output. Evaluation of the network is carried out with a test dataset consisting of 2200 microstructures based on different configurations than originally used for training. The trained network is applied recursively on initial order parameters to calculate the time evolution of the phase fields. The results are compared to the ones obtained from the conventional numerical solution in terms of the errors in order parameters and the system's free energy. The resulting order parameter error averaged over all points and all simulation cases is 0.005 and the relative error in the total free energy in all simulation boxes does not exceed 1%.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
On the higher-order pseudo-continuum characterization of discrete kinematic results from experimental measurement or discrete simulation
Authors:
Mohammad Khorrami,
Jaber R. Mianroodi,
Bob Svendsen
Abstract:
The purpose of this work is the development and determination of higher-order continuum-like kinematic measures which characterize discrete kinematic data obtained from experimental measurement (e.g., digital image correlation) or kinematic results from discrete modeling and simulation (e.g., molecular statics, molecular dynamics, or quantum DFT). From a continuum point of view, such data or resul…
▽ More
The purpose of this work is the development and determination of higher-order continuum-like kinematic measures which characterize discrete kinematic data obtained from experimental measurement (e.g., digital image correlation) or kinematic results from discrete modeling and simulation (e.g., molecular statics, molecular dynamics, or quantum DFT). From a continuum point of view, such data or results are in general non-affine and incompatible, due for example to shear banding, material defects, or microstructure. To characterize such information in a (pseudo-) continuum fashion, the concept of discrete local deformation is introduced and exploited. The corresponding measures are determined in a purely discrete fashion independent of any relation to continuum fields. Demonstration and verification of the approach is carried out with the help of example applications based on non-affine and incompatible displacement information. In particular, for the latter case, molecular statics results for the displacement of atoms in and around a dislocation core in fcc Au are employed. The corresponding characterization of lattice distortion in and around the core in terms of higher-order discrete local deformation measures clearly shows that, even in the simplest case of planar cores, such distortion is only partly characterized by the Nye tensor.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Chemo-Mechanical Phase-Field Modeling of Iron Oxide Reduction with Hydrogen
Authors:
Yang Bai,
Jaber Rezaei Mianroodi,
Yan Ma,
Alisson Kwiatkowski da Silva,
Bob Svendsen,
Dierk Raabe
Abstract:
The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical react…
▽ More
The reduction of iron ore with carbon-carriers is one of the largest sources of greenhouse gas emissions in the industry, motivating global activities to replace the coke-based blast furnace reduction by hydrogen-based direct reduction (HyDR). Iron oxide reduction with hydrogen has been widely investigated both experimentally and theoretically. The process includes multiple types of chemical reactions, solid state and defect-mediated diffusion (by oxygen and hydrogen species), several phase transformations, as well as massive volume shrinkage and mechanical stress buildup. In this work, a chemo-mechanically coupled phase-field (PF) model has been developed to explore the interplay between phase transformation, chemical reaction, species diffusion, large elasto-plastic deformation and microstructure evolution. Energetic constitutive relations of the model are based on the system free energy which is calibrated with the help of a thermodynamic database. The model has been first applied to the classical core-shell (wüstite-iron) structure. Simulations show that the phase transformation from wüstite to alpha-iron can result in high stress and rapidly decelerating reaction kinetics. Mechanical stresses can contribute elastic energy to the system, making phase transformation difficult. Thus slow reaction kinetics and low metallization are observed. However, if the stress becomes comparatively high, it can shift the shape of the free energy from a double-well to a single-well case and speed up the transformation. The model has been further applied to simulate an actual iron oxide specimen with its complex microstructure, characterized by electron microscopy. The simulation results show that isolated pores in the microstructure are filled with water vapor during reduction, an effect which influences the local reaction atmosphere and dynamics.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Curvature-induced long ranged supercurrents in diffusive SFS Josephson Junctions, with dynamic $0-π$ transition
Authors:
Tancredi Salamone,
Mathias B. M. Svendsen,
Morten Amundsen,
Sol Jacobsen
Abstract:
We report that spin supercurrents can be induced in diffusive SFS Josephson junctions without any magnetic misalignment or intrinsic spin orbit coupling. Instead, the pathway to spin triplet generation is provided via geometric curvature, and results in a long ranged Josephson effect. In addition, the curvature is shown to induce a dynamically tunable $0-π$ transition in the junction. We provide t…
▽ More
We report that spin supercurrents can be induced in diffusive SFS Josephson junctions without any magnetic misalignment or intrinsic spin orbit coupling. Instead, the pathway to spin triplet generation is provided via geometric curvature, and results in a long ranged Josephson effect. In addition, the curvature is shown to induce a dynamically tunable $0-π$ transition in the junction. We provide the analytic framework and discuss potential experimental and innovation implications.
△ Less
Submitted 23 July, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
A geometrically adapted reduced set of frequencies for a FFT-based microstructure simulation
Authors:
Christian Gierden,
Johanna Waimann,
Bob Svendsen,
Stefanie Reese
Abstract:
We present a modified model order reduction (MOR) technique for the FFT-based simulation of composite microstructures. It utilizes the earlier introduced MOR technique (Kochmann et al. [2019]), which is based on solving the Lippmann-Schwinger equation in Fourier space by a reduced set of frequencies. Crucial for the accuracy of this MOR technique is on the one hand the amount of used frequencies a…
▽ More
We present a modified model order reduction (MOR) technique for the FFT-based simulation of composite microstructures. It utilizes the earlier introduced MOR technique (Kochmann et al. [2019]), which is based on solving the Lippmann-Schwinger equation in Fourier space by a reduced set of frequencies. Crucial for the accuracy of this MOR technique is on the one hand the amount of used frequencies and on the other hand the choice of frequencies used within the simulation. Kochmann et al. [2019] defined the reduced set of frequencies by using a fixed sampling pattern, which is most general but leads to poor microstructural results when considering only a few frequencies. Consequently, a reconstruction algorithm based on the TV1-algorithm [Candes et al., 2006] was used in a post-processing step to generate highly resolved micromechanical fields. The present work deals with a modified sampling pattern generation for this MOR technique. Based on the idea, that the micromechanical material response strongly depends on the phase-wise material behavior, we propose the usage of sampling patterns adapted to the spatial arrangement of the individual phases. This leads to significantly improved microscopic and overall results. Hence, the time-consuming reconstruction in the post-processing step that was necessary in the earlier work is no longer required. To show the adaptability and robustness of this new choice of sampling patterns, several two dimensional examples are investigated. In addition, also the 3D extension of the algorithm is presented.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Development and comparison of spectral algorithms for numerical modeling of the quasi-static mechanical behavior of inhomogeneous materials
Authors:
M. Khorrami,
J. R. Mianroodi,
P. Shanthraj,
B. Svendsen
Abstract:
In the current work, a number of algorithms are developed and compared for the numerical solution of periodic (quasi-static) linear elastic mechanical boundary-value problems (BVPs) based on two different discretizations of Fourier series. The first is standard and based on the trapezoidal approximation of the Fourier mode integral, resulting in trapezoidal discretization (TD) of the truncated Fou…
▽ More
In the current work, a number of algorithms are developed and compared for the numerical solution of periodic (quasi-static) linear elastic mechanical boundary-value problems (BVPs) based on two different discretizations of Fourier series. The first is standard and based on the trapezoidal approximation of the Fourier mode integral, resulting in trapezoidal discretization (TD) of the truncated Fourier series. Less standard is the second discretization based on piecewise-constant approximation of the Fourier mode integrand, yielding a piecewise-constant discretization (PCD) of this series. Employing these, fixed-point algorithms are formulated via Green-function preconditioning (GFP) and finite-difference discretization (of differential operators; FDD). In particular, in the context of PCD, this includes an algorithm based on the so-called "discrete Green operator" (DGO) recently introduced by Eloh et al. (2019), which employs GFP, but not FDD. For computational comparisons, the (classic) benchmark case of a cubic inclusion embedded in a matrix (e.g., Suquet, 1997; Willot, 2015) is employed. Both discontinuous and smooth transitions in elastic stiffness at the matrix-inclusion (MI) interface are considered. In the context of both TD and PCD, a number of GFP- and FDD-based algorithms are developed. Among these, one based on so-called averaged-forward-backward-differencing (AFB) is shown to result in the greatest improvement in convergence rate. As it turns out, AFB is equivalent to the "rotated scheme" (R) of Willot (2015) in the context of TD. In the context of PCD, comparison of the performance and convergence behavior of AFB/R- and DGO-based algorithms shows that the former is more efficient than the latter for larger phase contrasts.
△ Less
Submitted 4 September, 2020;
originally announced September 2020.
-
Multi-component chemo-mechanics based on transport relations for the chemical potential
Authors:
Pratheek Shanthraj,
Chuanlai Liu,
Amirhassan Akbarian,
Bob Svendsen,
Dierk Raabe
Abstract:
A chemo-mechanical model for a finite-strain elasto-viscoplastic material containing multiple chemical components is formulated and an efficient numerical implementation is developed to solve the resulting transport relations. The numerical solution relies on inverting the constitutive model for the chemical potential. In this work, a semi-analytical inversion for a general family of multi-compone…
▽ More
A chemo-mechanical model for a finite-strain elasto-viscoplastic material containing multiple chemical components is formulated and an efficient numerical implementation is developed to solve the resulting transport relations. The numerical solution relies on inverting the constitutive model for the chemical potential. In this work, a semi-analytical inversion for a general family of multi-component regular-solution chemical free energy models is derived. This is based on splitting the chemical free energy into a convex contribution, treated implicitly, and a non-convex contribution, treated explicitly. This results in a reformulation of the system transport equations in terms of the chemical potential rather than the composition as the independent field variable. The numerical conditioning of the reformulated system, discretised by finite elements, is shown to be significantly improved, and convergence to the Cahn-Hilliard solution is demonstrated for the case of binary spinodal decomposition. Chemo-mechanically coupled binary and ternary spinodal decomposition systems are then investigated to illustrate the effect of anisotropic elastic deformation and plastic relaxation of the resulting spinodal morphologies in more complex material systems.
△ Less
Submitted 1 August, 2019; v1 submitted 25 June, 2019;
originally announced June 2019.
-
Alloy Design for Mechanical Properties: Conquering the Length Scales
Authors:
Irene J. Beyerlein,
Shuozhi Xu,
Javier LLorca,
Jaafar A. El-Awady,
Jaber R. Mianroodi,
Bob Svendsen
Abstract:
Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys demonstration of superior properties, such as high strength, creep resistance, high ductility, and fracture toughness, is not sufficient to secure its use in widespread…
▽ More
Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys demonstration of superior properties, such as high strength, creep resistance, high ductility, and fracture toughness, is not sufficient to secure its use in widespread application. Still, a good model is needed, to take measurable alloy properties, such as microstructure and chemical composition, and forecast how the alloy will perform in specified mechanical deformation conditions, including temperature, time, and rate. In this bulletin, we highlight recent achievements by multiscale modeling in elucidating the coupled effects of alloying, microstructure, and the dynamics of mechanisms on the mechanical properties of polycrystalline alloys. Much of the understanding gained by these efforts relied on integration of computational tools that varied over many length and time scales, from first principles density functional theory, atomistic simulation methods, dislocation and defect theory, micromechanics, phase field modeling, single crystal plasticity, and polycrystalline plasticity.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
A computational approach towards modelling dislocation transmission across phase boundary
Authors:
F. Bormann,
R. H. J. Peerlings,
M. G. D. Geers,
B. Svendsen
Abstract:
To study the nanoscopic interaction between edge dislocations and a phase boundary within a two-phase microstructure the effect of the phase contrast on the internal stress field due to the dislocations needs to be taken into account. For this purpose a 2D semi-discrete model is proposed in this paper. It consists of two distinct phases, each with its specific material properties, separated by a f…
▽ More
To study the nanoscopic interaction between edge dislocations and a phase boundary within a two-phase microstructure the effect of the phase contrast on the internal stress field due to the dislocations needs to be taken into account. For this purpose a 2D semi-discrete model is proposed in this paper. It consists of two distinct phases, each with its specific material properties, separated by a fully coherent and non-damaging phase boundary. Each phase is modelled as a continuum enriched with a Peierls--Nabarro (PN) dislocation region, confining dislocation motion to a discrete plane, the glide plane. In this paper, a single glide plane perpendicular to and continuous across the phase boundary is considered. Along the glide plane bulk induced shear tractions are balanced by glide plane shear tractions based on the classical PN model. The model's ability to capture dislocation obstruction at phase boundaries, dislocation pile-ups and dislocation transmission is studied. Results show that the phase contrast in material properties (e.g. elastic stiffness, glide plane properties) alone creates a barrier to the motion of dislocations from a soft to a hard phase. The proposed model accounts for the interplay between dislocations, external boundaries and phase boundary and thus represents a suitable tool for studying edge dislocation--phase boundary interaction in two-phase microstructures.
△ Less
Submitted 18 October, 2018;
originally announced October 2018.
-
Non-linear elastic effects in phase field crystal and amplitude equations: Comparison to ab initio simulations of bcc metals and graphene
Authors:
C. Hüter,
M. Friák,
M. Weikamp,
J. Neugebauer,
N. Goldenfeld,
B. Svendsen,
R. Spatschek
Abstract:
We investigate non-linear elastic deformations in the phase field crystal model and derived amplitude equations formulations. Two sources of non-linearity are found, one of them based on geometric non-linearity expressed through a finite strain tensor. It reflects the Eulerian structure of the continuum models and correctly describes the strain dependence of the stiffness. In general, the relevant…
▽ More
We investigate non-linear elastic deformations in the phase field crystal model and derived amplitude equations formulations. Two sources of non-linearity are found, one of them based on geometric non-linearity expressed through a finite strain tensor. It reflects the Eulerian structure of the continuum models and correctly describes the strain dependence of the stiffness. In general, the relevant strain tensor is related to the left Cauchy-Green deformation tensor. In isotropic one- and two-dimensional situations the elastic energy can be expressed equivalently through the right deformation tensor. The predicted isotropic low temperature non-linear elastic effects are directly related to the Birch-Murnaghan equation of state with bulk modulus derivative $K'=4$ for bcc. A two-dimensional generalization suggests $K'_{2D}=5$. These predictions are in agreement with ab initio results for large strain bulk deformations of various bcc elements and graphene. Physical non-linearity arises if the strain dependence of the density wave amplitudes is taken into account and leads to elastic weakening. For anisotropic deformations the magnitudes of the amplitudes depend on their relative orientation to the applied strain.
△ Less
Submitted 8 February, 2016;
originally announced February 2016.
-
Modeling of grain boundary dynamics using amplitude equations
Authors:
Claas Hüter,
Jörg Neugebauer,
Guillaume Boussinot,
Bob Svendsen,
Ulrich Prahl,
Robert Spatschek
Abstract:
We discuss the modelling of grain boundary dynamics within an amplitude equations description, which is derived from classical density functional theory or the phase field crystal model. The relation between the conditions for periodicity of the system and coincidence site lattices at grain boundaries is investigated. Within the amplitude equations framework we recover predictions of the geometric…
▽ More
We discuss the modelling of grain boundary dynamics within an amplitude equations description, which is derived from classical density functional theory or the phase field crystal model. The relation between the conditions for periodicity of the system and coincidence site lattices at grain boundaries is investigated. Within the amplitude equations framework we recover predictions of the geometrical model by Cahn and Taylor for coupled grain boundary motion, and find both $\langle100\rangle$ and $\langle110\rangle$ coupling. No spontaneous transition between these modes occurs due to restrictions related to the rotational invariance of the amplitude equations. Grain rotation due to coupled motion is also in agreement with theoretical predictions. Whereas linear elasticity is correctly captured by the amplitude equations model, open questions remain for the case of nonlinear deformations.
△ Less
Submitted 18 August, 2014; v1 submitted 16 July, 2014;
originally announced July 2014.
