-
A new technique to measure noise parameters for global 21-cm experiments
Authors:
Danny C. Price,
Cheuk-Yu Edward Tong,
Adrian T. Sutinjo,
Nipanjana Patra,
Lincoln J. Greenhill
Abstract:
Radiometer experiments to detect 21-cm Hydrogen line emission from the Cosmic Dawn and Epoch of Reionization rely upon precise absolute calibration. During calibration, noise generated by amplifiers within the radiometer receiver must be accounted for; however, it is difficult to measure as the noise power varies with source impedance. In this letter, we introduce a convenient method to measure th…
▽ More
Radiometer experiments to detect 21-cm Hydrogen line emission from the Cosmic Dawn and Epoch of Reionization rely upon precise absolute calibration. During calibration, noise generated by amplifiers within the radiometer receiver must be accounted for; however, it is difficult to measure as the noise power varies with source impedance. In this letter, we introduce a convenient method to measure the noise parameters of a receiver system, which is practical for low-frequency receivers used in global 21-cm experiments.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Calculation and Uncertainty of Fast Radio Burst Structure Based on Smoothed Data
Authors:
Adrian T. Sutinjo,
Danica R. Scott,
Clancy W. James,
Marcin Glowacki,
Keith W. Bannister,
Hyerin Cho,
Cherie K. Day,
Adam T. Deller,
Timothy P. Perrett,
Ryan M. Shannon
Abstract:
Studies of the time-domain structure of fast radio bursts (FRBs) require an accurate estimate of the FRB dispersion measure in order to recover the intrinsic burst shape. Furthermore, the exact DM is itself of interest when studying the time-evolution of the medium through which multiple bursts from repeating FRBs propagate. A commonly used approach to obtain the dispersion measure is to take the…
▽ More
Studies of the time-domain structure of fast radio bursts (FRBs) require an accurate estimate of the FRB dispersion measure in order to recover the intrinsic burst shape. Furthermore, the exact DM is itself of interest when studying the time-evolution of the medium through which multiple bursts from repeating FRBs propagate. A commonly used approach to obtain the dispersion measure is to take the value that maximizes the FRB structure in the time domain. However, various authors use differing methods to obtain this structure parameter, and do not document the smoothing method used. Furthermore, there are no quantitative estimates of the error in this procedure in the FRB literature. In this letter, we present a smoothing filter based on the discrete cosine transform, and show that computing the structure parameter by summing the squares of the derivatives and taking the square root immediately lends itself to calculation of uncertainty of the structure parameter. We illustrate this with FRB181112 and FRB210117 data, which were detected by the Australian Square Kilometre Array Pathfinder, and for which high-time-resolution data is available.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Measuring Noise Parameters Using an Open, Short, Load, and 1/8-wavelength Cable as Source Impedances
Authors:
Danny C. Price,
Cheuk-Yu Edward Tong,
Adrian T. Sutinjo,
Lincoln J. Greenhill,
Nipanjana Patra
Abstract:
Noise parameters are a set of four measurable quantities which determine the noise performance of a radio-frequency device under test. The noise parameters of a 2-port device can be extracted by connecting a set of 4 or more source impedances at the device's input, measuring the noise power of the device with each source connected, and then solving a matrix equation. However, sources with high ref…
▽ More
Noise parameters are a set of four measurable quantities which determine the noise performance of a radio-frequency device under test. The noise parameters of a 2-port device can be extracted by connecting a set of 4 or more source impedances at the device's input, measuring the noise power of the device with each source connected, and then solving a matrix equation. However, sources with high reflection coefficients cannot be used due to a singularity that arises in entries of the matrix. Here, we detail a new method of noise parameter extraction using a singularity-free matrix that is compatible with high-reflection sources. We show that open, short, load and an open cable ("OSLC") can be used to extract noise parameters, and we detail a practical measurement approach. The OSLC approach is particularly well-suited for low-noise amplifier measurement at frequencies below 1 GHz, where alternative methods require physically large apparatus.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
System equivalent flux density of Stokes I, Q, U, V of a polarimetric interferometer
Authors:
A. T. Sutinjo,
D. C. X. Ung,
M. Sokolowski
Abstract:
We present the system equivalent flux density (SEFD) expressions for all four Stokes parameters: I, Q, U, V. The expressions were derived based on our derivation of SEFD I (for Stokes I) and subsequent extensions of that work to phased array and multipole interferometers. The key to the derivation of the SEFD Q, U, V expressions is to recognize that the noisy estimates of Q, U, V can be written as…
▽ More
We present the system equivalent flux density (SEFD) expressions for all four Stokes parameters: I, Q, U, V. The expressions were derived based on our derivation of SEFD I (for Stokes I) and subsequent extensions of that work to phased array and multipole interferometers. The key to the derivation of the SEFD Q, U, V expressions is to recognize that the noisy estimates of Q, U, V can be written as the trace of a matrix product. This shows that the SEFD I is a special case, where the general case involves a diagonal or anti-diagonal 2x2 matrix interposed in the matrix multiplication. Following this step, the relation between the SEFD for I and Q, U, V becomes immediately evident. We present example calculations for a crossed dipole based on the formulas derived and the comparison between simulation and observation using the Murchison Widefield Array (MWA).
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
System equivalent flux density of a low-frequency polarimetric phased array interferometer
Authors:
A. T. Sutinjo,
D. C. X. Ung,
M. Sokolowski,
M. Kovaleva,
S. McSweeney
Abstract:
This paper extends the treatment of system equivalent flux density (SEFD) in Sutinjo, A. T. et al. (2021) (Paper I) to interferometric phased array telescopes. The objective is to develop an SEFD formula involving only the most fundamental assumptions and one that is readily applicable to phased array interferometer radio observations. Then, we aimed at comparing the resultant SEFD expression agai…
▽ More
This paper extends the treatment of system equivalent flux density (SEFD) in Sutinjo, A. T. et al. (2021) (Paper I) to interferometric phased array telescopes. The objective is to develop an SEFD formula involving only the most fundamental assumptions and one that is readily applicable to phased array interferometer radio observations. Then, we aimed at comparing the resultant SEFD expression against the often-used root-mean-square (RMS) SEFD approximation, SEFDrmsI = (1/2)(SEFD^2_XX + SEFD^2_YY)^(1/2) to study the inaccuracy of the SEFDrms.
We take into account all mutual coupling and noise coupling within an array environment (intra-array coupling). This intra-array noise coupling is included in the SEFD expression through the realized noise resistance of the array, which accounts for the system noise. No assumption is made regarding the polarization (or lack thereof) of the sky nor the orthogonality of the antenna elements. The fundamental noise assumption is that, in phasor representation, the real and imaginary components of a given noise source are independent and equally distributed (iid) with zero mean. Noise sources that are mutually correlated and non-iid among themselves are allowed, provided the real and imaginary components of each noise source are iid. The system noise is uncorrelated between array entities separated by a baseline distance, which in the case of the Murchison Widefield Array (MWA) is typically tens of wavelengths or greater. By comparing the resulting SEFD formula to the SEFD_I^rms approximation, we proved that SEFD_I^rms always underestimates the SEFD, which leads to an overestimation of array sensitivity.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
System Equivalent Flux Density of a Polarimetric Tripole Radio Interferometer
Authors:
A. T. Sutinjo,
M. Kovaleva,
Y. Xu
Abstract:
System equivalent flux density (SEFD) is an important figure of merit of a radio telescope. This paper aims to derive a general expression for SEFD of a polarimetric tripole interferometer. The derivation makes only two basic and reasonable assumptions. First, the noise under consideration is zero mean and when expressed in complex phasor domain, has independent and identically distributed (iid) r…
▽ More
System equivalent flux density (SEFD) is an important figure of merit of a radio telescope. This paper aims to derive a general expression for SEFD of a polarimetric tripole interferometer. The derivation makes only two basic and reasonable assumptions. First, the noise under consideration is zero mean and when expressed in complex phasor domain, has independent and identically distributed (iid) real and imaginary components. Correlated and non-identically distributed noise sources are allowed as long as the real and imaginary components remain iid. Second, the system noise is uncorrelated between the elements separated by a baseline distance. The SEFD expression is derived from first principles, that is the standard deviation of the noisy flux estimate in a target direction due to system noise. The resulting SEFD expression is expressed as a simple matrix operation that involves a mixture of the system temperatures of each antenna and the Jones matrix elements. It is not limited to tripoles, but rather, fully extensible to multipole antennas; it is not limited to mutually orthogonal antennas. To illustrate the usefulness of the expression and how the formula is applied, we discuss an example calculation based on a tripole interferometer on lunar orbit for ultra-long wavelengths observation. We compared the SEFD results based on a formula assuming short dipoles and the general expression. As expected, the SEFDs converge at the ultra-long wavelengths where the dipoles are well-approximated as short dipoles. The general SEFD expression can be applied to any multipole antenna systems with arbitrary shapes.
△ Less
Submitted 13 December, 2021;
originally announced December 2021.
-
Sensitivity of a Low-Frequency Polarimetric Radio Interferometer
Authors:
A. T. Sutinjo,
M. Sokolowski,
M. Kovaleva,
D. C. X. Ung,
J. W. Broderick,
R. B. Wayth,
D. B. Davidson,
S. J. Tingay
Abstract:
Aims: This paper aims to derive an expression for the sensitivity of a polarimetric radio interferometer that is valid for all-sky observations of arbitrarily polarized sources, with neither a restriction on FoV nor with any a priori assumption regarding the polarization state of the source. We verify the resulting formula with an all-sky observation using the Murchison Widefield Array (MWA) teles…
▽ More
Aims: This paper aims to derive an expression for the sensitivity of a polarimetric radio interferometer that is valid for all-sky observations of arbitrarily polarized sources, with neither a restriction on FoV nor with any a priori assumption regarding the polarization state of the source. We verify the resulting formula with an all-sky observation using the Murchison Widefield Array (MWA) telescope. Methods: The sensitivity expression is developed from first principles by applying the concept of System Equivalent Flux Density (SEFD) to a polarimetric radio interferometer not by computing $A_e/T_{sys}$. The SEFD is calculated from the standard deviation of the noisy flux density estimate for a target source due to system noise. Results: The SEFD for a polarimetric radio interferometer is generally not $1/\sqrt{2}$ of a single-polarized interferometer as is often assumed for narrow FoV. This assumption can lead to significant errors for a dual-polarized dipole based system, which is common in low-frequency radio astronomy: up to $\sim 15\%$ for a zenith angle (ZA) coverage of $45^\circ$, and up to $\sim45\%$ for $60^\circ$ coverage. The worst case errors occur in the diagonal planes of the dipole for very wide FoV. This is demonstrated through theory, simulation and observations. Furthermore, using the resulting formulation, calculation of the off-zenith sensitivity is straightforward and unambiguous. Conclusions: For wide FoV observations pertinent to low-frequency radio interferometer such as the SKA-Low, the narrow FoV and the single-polarized sensitivity expressions are not correct and should be replaced by the formula derived in this paper.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Design Equations for a Closely-Spaced Two-Element Interferometer Including Internal Noise Coupling
Authors:
Adrian T. Sutinjo,
Benjamin McKinley,
Leonid Belostotski,
Daniel C. X. Ung,
Jishnu N. Thekkeppattu
Abstract:
We present design equations for a two-element closely-spaced interferometer for measuring the noise temperature of a uniform sky. Such an interferometer is useful for observing highly diffuse radio sources such as the Milky Way and Cosmological signals. We develop a simple equivalent circuit based on radiophysics and antenna theory to describe the interactions between key design parameters such as…
▽ More
We present design equations for a two-element closely-spaced interferometer for measuring the noise temperature of a uniform sky. Such an interferometer is useful for observing highly diffuse radio sources such as the Milky Way and Cosmological signals. We develop a simple equivalent circuit based on radiophysics and antenna theory to describe the interactions between key design parameters such as antenna self and mutual impedance and noise parameters of the receiver; the latter is considered internal noise. This approach straightforwardly facilitates design studies as the response of the uniform signal and the systematic error due to internal noise coupling can be analyzed using the same equivalent circuit. The equivalent circuit shows that mutual coherence due to internal noise coupling is non-negligible and an inherent property of a closely-spaced interferometer. A realistic example design involving two closely-spaced horizontal dipoles over a lossy ground for Cosmological signal detection from 50 to 100 MHz is discussed as an illustration.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Noise Temperature of Phased Array Radio Telescope: The Murchison Widefield Array and the Engineering Development Array
Authors:
Daniel C. X. Ung,
Marcin Sokolowski,
Adrian T. Sutinjo,
David B. Davidson
Abstract:
This paper presents a framework to compute the receiver noise temperature (Trcv) of two low-frequency radio telescopes, the Murchison Widefield Array (MWA) and the Engineering Development Array (EDA). The MWA was selected because it is the only operational low-frequency Square Kilometre Array (SKA) precursor at the Murchison Radio-astronomy Observatory, while the EDA was selected because it mimics…
▽ More
This paper presents a framework to compute the receiver noise temperature (Trcv) of two low-frequency radio telescopes, the Murchison Widefield Array (MWA) and the Engineering Development Array (EDA). The MWA was selected because it is the only operational low-frequency Square Kilometre Array (SKA) precursor at the Murchison Radio-astronomy Observatory, while the EDA was selected because it mimics the proposed SKA-Low station size and configuration. It will demonstrated that the use of an existing power wave based framework for noise characterization of multiport amplifiers is sufficiently general to evaluate Trcv of phased arrays. The calculation of Trcv was done using a combination of measured noise parameters of the low-noise amplifier (LNA) and simulated S-parameters of the arrays. The calculated values were compared to measured results obtained via astronomical observation and both results are found to be in agreement. Such verification is lacking in current literature. It was shown that the receiver noise temperatures of both arrays are lower when compared to a single isolated element. This is caused by the increase in mutual coupling within the array which is discussed in depth in this paper.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
Calibration and Stokes Imaging with Full Embedded Element Primary Beam Model for the Murchison Widefield Array
Authors:
M. Sokolowski,
T. Colegate,
A. T. Sutinjo,
D. Ung,
R. B. Wayth,
N. Hurley-Walker,
E. Lenc,
B. Pindor,
J. Morgan,
D. L. Kaplan,
M. E. Bell,
J. R. Callingham,
K. S. Dwarakanath,
Bi-Qing For,
B. M. Gaensler,
P. J. Hancock,
L. Hindson,
M. Johnston-Hollitt,
A. D. Kapińska,
B. McKinley,
A. R. Offringa,
P. Procopio,
L. Staveley-Smith,
C. Wu,
Q. Zheng
Abstract:
The Murchison Widefield Array (MWA), located in Western Australia, is one of the low-frequency precursors of the international Square Kilometre Array (SKA) project. In addition to pursuing its own ambitious science program, it is also a testbed for wide range of future SKA activities ranging from hardware, software to data analysis. The key science programs for the MWA and SKA require very high dy…
▽ More
The Murchison Widefield Array (MWA), located in Western Australia, is one of the low-frequency precursors of the international Square Kilometre Array (SKA) project. In addition to pursuing its own ambitious science program, it is also a testbed for wide range of future SKA activities ranging from hardware, software to data analysis. The key science programs for the MWA and SKA require very high dynamic ranges, which challenges calibration and imaging systems. Correct calibration of the instrument and accurate measurements of source flux densities and polarisations require precise characterisation of the telescope's primary beam. Recent results from the MWA GaLactic Extragalactic All-sky MWA (GLEAM) survey show that the previously implemented Average Embedded Element (AEE) model still leaves residual polarisations errors of up to 10-20 % in Stokes Q. We present a new simulation-based Full Embedded Element (FEE) model which is the most rigorous realisation yet of the MWA's primary beam model. It enables efficient calculation of the MWA beam response in arbitrary directions without necessity of spatial interpolation. In the new model, every dipole in the MWA tile (4 x 4 bow-tie dipoles) is simulated separately, taking into account all mutual coupling, ground screen and soil effects, and therefore accounts for the different properties of the individual dipoles within a tile. We have applied the FEE beam model to GLEAM observations at 200 - 231 MHz and used false Stokes parameter leakage as a metric to compare the models. We have determined that the FEE model reduced the magnitude and declination-dependent behaviour of false polarisation in Stokes Q and V while retaining low levels of false polarisation in Stokes U.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Revisiting Hybrid Interferometry with Low-Frequency Radio Astronomy Arrays
Authors:
Adrian T. Sutinjo,
Daniel Ung,
Tim M. Colegate,
Randall B. Wayth,
Peter J. Hall,
Eloy de Lera Acedo
Abstract:
Radio interferometry most commonly involves antennas or antenna arrays of identical design. The identical antenna assumption leads to a convenient and useful mathematical simplification resulting in a scalar problem. An interesting variant to this is a "hybrid" interferometer involving two designs. We encounter this in the characterization of low-frequency antenna/array prototypes using a homogeno…
▽ More
Radio interferometry most commonly involves antennas or antenna arrays of identical design. The identical antenna assumption leads to a convenient and useful mathematical simplification resulting in a scalar problem. An interesting variant to this is a "hybrid" interferometer involving two designs. We encounter this in the characterization of low-frequency antenna/array prototypes using a homogenous low-frequency array telescope such as the Murchison Widefield Array (MWA). In this work, we present an interferometry equation that applies to hybrid antennas. The resulting equation involves vector inner products rather than scalar multiplications. We discuss physical interpretation and useful applications of this concept in the areas of sensitivity measurement and calibration of an antenna/array under test using a compact calibrator source.
△ Less
Submitted 23 May, 2017;
originally announced May 2017.
-
Spectral performance of Square Kilometre Array Antennas II: Calibration performance
Authors:
Cathryn M. Trott,
Eloy de Lera Acedo,
Randall B. Wayth,
Nicolas Fagnoni,
Adrian T. Sutinjo,
Brett Wakley,
Chris Ivan B. Punzalan
Abstract:
We test the bandpass smoothness performance of two prototype Square Kilometre Array (SKA) SKA1-Low log-periodic dipole antennas, the SKALA2 and SKALA3 (`SKA Log-periodic Antenna'), and the current dipole from the Murchison Widefield Array (MWA) precursor telescope. Throughout this paper, we refer to the output complex-valued voltage response of an antenna when connected to a low noise amplifier (L…
▽ More
We test the bandpass smoothness performance of two prototype Square Kilometre Array (SKA) SKA1-Low log-periodic dipole antennas, the SKALA2 and SKALA3 (`SKA Log-periodic Antenna'), and the current dipole from the Murchison Widefield Array (MWA) precursor telescope. Throughout this paper, we refer to the output complex-valued voltage response of an antenna when connected to a low noise amplifier (LNA), as the dipole bandpass. In Paper I (de Lera Acedo et al. 2017), the bandpass spectral response of the log-periodic antenna being developed for the SKA1-Low was estimated using numerical electromagnetic simulations and analyzed using low-order polynomial fittings and it was compared with the HERA antenna against the delay spectrum metric. In this work, realistic simulations of the SKA1-Low instrument, including frequency-dependent primary beams and array configuration, are used with a weighted least-squares polynomial estimator to assess the ability of prototype antennas to perform the SKA Epoch of Reionisation (EoR) statistical experiments. This work complements the ideal estimator tolerances computed for the proposed EoR science experiments in Trott & Wayth (2016), with the realised performance of an optimal and standard estimation (calibration) procedure. With a sufficient sky calibration model at higher frequencies, all antennas have bandpasses that are sufficiently smooth to meet the tolerances described in Trott & Wayth (2016) to perform the EoR statistical experiments, and these are primarily limited by an adequate sky calibration model, and the thermal noise level in the calibration data. At frequencies of the Cosmic Dawn (CD), which is of principal interest to SKA as one of the first next-generation telescopes capable of accessing higher redshifts, the MWA dipole and SKALA3 antenna have adequate performance, while the SKALA2 design will impede the ability to explore this era.
△ Less
Submitted 8 May, 2017;
originally announced May 2017.
-
Characterization of a Low-Frequency Radio Astronomy Prototype Array in Western Australia
Authors:
A. T. Sutinjo,
T. M. Colegate,
R. B. Wayth,
P. J. Hall,
E. de Lera Acedo,
T. Booler,
A. J. Faulkner,
L. Feng,
N. Hurley-Walker,
B. Juswardy,
S. K. Padhi,
N. Razavi-Ghods,
M. Sokolowski,
S. J. Tingay,
J. G. Bij de Vaate
Abstract:
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory…
▽ More
We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory (MRO) near the Australian Square Kilometre Array (SKA) core site. We characterize the AAVS0.5 using two methods: in-situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In-situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 "tiles" and up to 3 km baselines, enabled in-situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
Antenna array characterization via radio interferometry observation of astronomical sources
Authors:
T. M. Colegate,
A. T. Sutinjo,
P. J. Hall,
S. K. Padhi,
R. B. Wayth,
J. G. Bij de Vaate,
B. Crosse,
D. Emrich,
A. J. Faulkner,
N. Hurley-Walker,
E. de Lera Acedo,
B. Juswardy,
N. Razavi-Ghods,
S. J. Tingay,
A. Williams
Abstract:
We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is pos…
▽ More
We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is possible via radio interferometry techniques. This method is well-known in the radio astronomy community but seems less so in antenna measurement and wireless communications communities, although the measurement challenges involving multiple undesired sources in the antenna field-of-view bear some similarities. We discuss this approach and our results with the expectation that this principle may find greater application in related fields.
△ Less
Submitted 20 January, 2015;
originally announced January 2015.
