-
Training and Upgrading Tokamak Power Plants with Remountable Superconducting Magnets
Authors:
S. B. L. Chislett-McDonald,
E. Surrey,
J. Naish,
A. Turner,
D. P. Hampshire
Abstract:
All high field superconductors producing magnetic fields above 12 T are brittle. Nevertheless, they will probably be the materials of choice in commercial tokamaks because the fusion power density in a tokamak scales as the fourth power of magnetic field. Here we propose using robust, ductile superconductors during the reactor commissioning phase in order to avoid brittle magnet failure while oper…
▽ More
All high field superconductors producing magnetic fields above 12 T are brittle. Nevertheless, they will probably be the materials of choice in commercial tokamaks because the fusion power density in a tokamak scales as the fourth power of magnetic field. Here we propose using robust, ductile superconductors during the reactor commissioning phase in order to avoid brittle magnet failure while operational safety margins are being established. Here we use the PROCESS systems code to inform development strategy and to provide detailed capital-cost-minimised tokamak power plant designs. We propose building a 'demonstrator' tokamak with an electric power output of 100 MWe, a plasma fusion gain Qplasma = 17, a net gain Qnet = 1.3, a cost of electricity (COE) of \$ 1148 (2021 US) per MWh (at 75 % availability) and high temperature superconducting operational TF magnets producing 5.4 T on-axis and 12.5 T peak-field. It uses Nb-Ti training magnets and will cost about \$ 9.75 Bn (2021 US). An equivalent 500 MWe plant has a COE of \$ 608 per MW suggesting that large tokamaks may eventually dominate the commercial market. We consider a range of designs optimised for capital cost (as the reactors considered are pilot plants) consisting of both 100 MWe and 500 MWe plants with each of two approaches for the magnets: training and upgrading. With training magnets, the plant is cost-optimised for REBCO TF magnets. For a 100 MWe plant, the Nb-Ti training magnets typically produce 70 % peak field on the toroidal field coils compared to REBCO magnets, 65 % peak field on the central solenoid and cost approx. 10 % of the total machine cost. Training magnets could in principle be reused for each of say 10 subsequent (commercial) machines and hence at 1 % bring only marginal additional cost.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
FAFNIR: Strategy and risk reduction in accelerator driven neutron sources for fusion materials irradiation data
Authors:
E. Surrey,
M. Porton,
A. Caballero,
T. Davenne,
D. Findlay,
A. Letchford,
J. Thomason,
J. Marrow,
S. Roberts,
A. Seryi,
B. Connolly,
P. Mummery,
H. Owen
Abstract:
The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justif…
▽ More
The need to populate the fusion materials engineering data base has long been recognized, the IFMIF facility being the present proposed neutron source for this purpose. Re-evaluation of the regulatory approach for the EU proposed DEMO device shows that the specification of the neutron source can be reduced with respect to IFMIF, allowing lower risk technology solutions to be considered. The justification for this approach is presented and a description of a proposed facility, FAFNIR, is presented with more detailed discussion of the accelerator and target designs.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
Reducing Risk and Accelerating Delivery of a Neutron Source for Fusion Materials Research
Authors:
E. Surrey,
M. Porton,
T. Davenne,
D. Findlay,
A. Letchford,
J. Thomason,
S. G. Roberts,
J. Marrow,
A. Seryi,
B. Connolly,
H. Owen
Abstract:
The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to dat…
▽ More
The materials engineering data base relevant to fusion irradiation is poorly populated and it has long been recognized that a fusion spectrum neutron source will be required, the facility IFMIF being the present proposal. Re- evaluation of the regulatory approach for the EU proposed DEMO device shows that the purpose of the source can be changed from lifetime equivalent irradiation exposure to data generation at lower levels of exposure by adopting a defence in depth strategy and regular component surveillance. This reduces the specification of the source with respect to IFMIF allowing lower risk technology solutions to be considered. A description of such a source, the Facility for Fusion Neutron Irradiation Research, FAFNIR, is presented here along with project timescales and costs.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
-
The SMARDDA Approach to Ray-Tracing and Particle Tracking
Authors:
Wayne Arter,
Elizabeth Surrey,
Damian. B. King
Abstract:
There is an increasing need to model plasma interaction with complex engineered surfaces, notably to verify that power deposition rates are acceptable. The SMARDDA algorithm has been developed to meet this requirement, with particular reference to the neutral beam ducts that feed into the vacuum vessels of tokamaks. Application to limiters and divertors is made in a companion paper. The algorithm…
▽ More
There is an increasing need to model plasma interaction with complex engineered surfaces, notably to verify that power deposition rates are acceptable. The SMARDDA algorithm has been developed to meet this requirement, with particular reference to the neutral beam ducts that feed into the vacuum vessels of tokamaks. Application to limiters and divertors is made in a companion paper. The algorithm is described in detail, highlighting key novel features, and illustrative duct calculations presented.
△ Less
Submitted 24 February, 2014;
originally announced March 2014.
-
Sco** Studies for NBI Launch Geometries on DEMO
Authors:
I. Jenkins,
C. D. Challis,
D. L. Keeling,
E. Surrey
Abstract:
Scans of Neutral Beam Injection (NBI) tangency radii and elevation on two possible DEMO scenarios have been performed with two beam energies, 1.5MeV and 1.0MeV, in order to determine the most favourable options for Neutral Beam Current Drive (NBCD) efficiency. In addition, a method using a genetic algorithm has been used to seek optimised solutions of NBI source locations and powers to synthesize…
▽ More
Scans of Neutral Beam Injection (NBI) tangency radii and elevation on two possible DEMO scenarios have been performed with two beam energies, 1.5MeV and 1.0MeV, in order to determine the most favourable options for Neutral Beam Current Drive (NBCD) efficiency. In addition, a method using a genetic algorithm has been used to seek optimised solutions of NBI source locations and powers to synthesize a target total plasma driven-current profile. It is found that certain beam trajectories may be proscribed by limitations on shinethrough onto the vessel wall. This may affect the ability of NBCD to extend the duration of a pulse in a scenario where it must complement the induced plasma current. Operating at the lower beam energy reduces the restrictions due to shinethrough and is attractive for technical reasons, but in the scenarios examined here this results in a spatial broadening of the NBCD profile, which may make it more challenging to achieve desired total driven-current profiles.
△ Less
Submitted 25 March, 2014;
originally announced March 2014.
-
An ion species model for positive ion sources - part II analysis of hydrogen isotope effects
Authors:
E Surrey,
A J T Holmes
Abstract:
A one dimensional model of the magnetic multipole volume plasma source has been developed for application to intense ion/neutral atom beam injectors. The model uses plasma transport coefficients for particle and energy flow to create a detailed description of the plasma parameters along an axis parallel to that of the extracted beam. In this paper the isotopic modelling of positive hydrogenic ions…
▽ More
A one dimensional model of the magnetic multipole volume plasma source has been developed for application to intense ion/neutral atom beam injectors. The model uses plasma transport coefficients for particle and energy flow to create a detailed description of the plasma parameters along an axis parallel to that of the extracted beam. In this paper the isotopic modelling of positive hydrogenic ions is considered and compared with experimental data from the neutral beam injectors of the Joint European Torus. The use of the code to gain insights into the processes contributing to the ratios of the ionic species is demonstrated and the conclusion is drawn that 75% of the atomic ion species arises from ionization of dissociated molecules and 25% from dissociation of the molecular ions. However whilst the former process is independent of the filter field, the latter is sensitive to the change in distribution of fast and thermal electrons produced by the magnetic filter field and an optimum combination of field strength and depth exists. Finally the code is used to predict the species ratios for the JET source operating in tritium and hence the neutral beam power injected into the plasma in the JET tritium campaign planned for 2016.
△ Less
Submitted 24 March, 2014;
originally announced March 2014.
-
An ion species model for positive ion sources - part I description of the model
Authors:
E Surrey,
A J T Holmes
Abstract:
A one dimensional model of the magnetic multipole volume plasma source has been developed for use in intense ion/neutral atom beam injectors. The model uses plasma transport coefficients for particle and energy flow to create a detailed description of the plasma parameters along an axis parallel to that of the extracted beam. Primarily constructed for applications to neutral beam injection systems…
▽ More
A one dimensional model of the magnetic multipole volume plasma source has been developed for use in intense ion/neutral atom beam injectors. The model uses plasma transport coefficients for particle and energy flow to create a detailed description of the plasma parameters along an axis parallel to that of the extracted beam. Primarily constructed for applications to neutral beam injection systems on fusion devices, the model concentrates on the hydrogenic isotopes but can be extended to any gas by substitution of the relevant masses, cross sections and rate coefficients. The model considers the flow of fast ionizing electrons that create the ratios of the three hydrogenic isotope ion species, H+, H2 +, H3 + (and similarly for deuterium and tritium) as they flow towards the beam extraction electrode, together with the production of negative hydrogenic ions through volume processes. The use of detailed energy balance in the discharge allows the determination of the fraction of the gas density that is in an atomic state and also the gas temperature as well as the electron temperatures and plasma potential. Comparisons are made between the results of the model and experimental measurements in deuterium from a number of different filament driven sources used on beam heating facilities.
△ Less
Submitted 24 March, 2014;
originally announced March 2014.
-
On the Challenge of Plasma Heating with the JET Metallic Wall
Authors:
M-L Mayoral,
V Bobkov,
A Czarnecka,
I Day,
A Ekedah,
P Jacquet,
M Goniche,
R King,
K Kirov,
E Lerche,
J Mailloux,
D Van Eester,
O Asunta,
C Challis,
D Ciric,
J W Coenen,
L Colas,
C Giroud,
M Graham,
I Jenkins,
E Joffrin,
T Jones,
D King,
V Kiptily,
C C Klepper
, et al. (17 additional authors not shown)
Abstract:
The major aspects linked to the use of the JET auxiliary heating systems: NBI, ICRF and LHCD, in the new JET ITER-like wall (JET-ILW) are presented. We show that although there were issues related to the operation of each system, efficient and safe plasma heating was obtained with room for higher power. For the NBI up to 25.7MW was safely injected; issues that had to be tackled were mainly the bea…
▽ More
The major aspects linked to the use of the JET auxiliary heating systems: NBI, ICRF and LHCD, in the new JET ITER-like wall (JET-ILW) are presented. We show that although there were issues related to the operation of each system, efficient and safe plasma heating was obtained with room for higher power. For the NBI up to 25.7MW was safely injected; issues that had to be tackled were mainly the beam shine-through and beam re-ionisation before its entrance into the plasma. For the ICRF system, 5MW were coupled in L-mode and 4MW in H-mode; the main areas of concern were RF-sheaths related heat loads and impurities production. For the LH, 2.5 MW were delivered without problems; arcing and generation of fast electron beams in front of the launcher that can lead to high heat loads were the keys issues. For each system, an overview will be given of: the main modifications implemented for safe use, their compatibility with the new metallic wall, the differences in behavior compared with the previous carbon wall, with emphasis on heat loads and impurity content in the plasma.
△ Less
Submitted 4 September, 2013;
originally announced September 2013.
