Showing 1–13 of 13 results for author: Sulanke, K -

The NectarCAM Timing System

Authors: F. Bradascio, H. Rueda, J. A. Barrio, J. Biteau, F. Brun, C. Champion, J-F. Glicenstein, D. Hoffmann, P. Jean, J. P. Lenain, F. Louis, A. Pérez, M. Punch, P. Sizun, K. -H. Sulanke, L. A. Tejedor, B. Vallage

Abstract: NectarCAM is a Cherenkov camera which is going to equip the Medium-Sized Telescopes (MST) of the northern site of the Cherenkov Telescope Array Observatory (CTAO). NectarCAM is equipped with 265 modules, each consisting of 7 photo-multiplier tubes (PMTs), a Front-End Board and a local camera trigger system used for data acquisition. This paper addresses the timing performance of NectarCAM which ar… ▽ More NectarCAM is a Cherenkov camera which is going to equip the Medium-Sized Telescopes (MST) of the northern site of the Cherenkov Telescope Array Observatory (CTAO). NectarCAM is equipped with 265 modules, each consisting of 7 photo-multiplier tubes (PMTs), a Front-End Board and a local camera trigger system used for data acquisition. This paper addresses the timing performance of NectarCAM which are crucial to reduce the noise in shower images and improve image cleaning as well as to discriminate between gamma-ray photons and cosmic-ray background and finally to allow coincidence identification with neighbouring telescopes for stereoscopic operations. Verification tests of the system have been performed in a dark room using various light sources to illuminate the first NectarCAM unit. The resulting timing precision and accuracy of the trigger arrival relative to a laser source, of individual and multiple pixel signals have been studied and are shown to comply to CTAO requirements. △ Less

Submitted 28 June, 2023; v1 submitted 31 January, 2023; originally announced January 2023.

Comments: 8 pages, 13 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1054 (2023) 168398

Design and performance of the multi-PMT optical module for IceCube Upgrade

Authors: T. Anderson, L. Classen, A. T. Fienberg, S. Mechbal, J. Schneider, K. -H. Sulanke, M. A. Unland Elorrieta, C. Wendt

Abstract: The IceCube Upgrade is the first step towards the next-generation neutrino observatory at the South Pole, IceCube-Gen2, and will be installed in the central region of the existing array. The Upgrade will consist of 693 newly developed, densely spaced optical sensors and 50 standalone calibration devices, which will enhance IceCube's capabilities both at low and high neutrino energies. Of the new s… ▽ More The IceCube Upgrade is the first step towards the next-generation neutrino observatory at the South Pole, IceCube-Gen2, and will be installed in the central region of the existing array. The Upgrade will consist of 693 newly developed, densely spaced optical sensors and 50 standalone calibration devices, which will enhance IceCube's capabilities both at low and high neutrino energies. Of the new sensors, 402 will be multi-PMT Digital Optical Modules (mDOMs). Consisting of 24 small photomultipliers arranged inside a pressure vessel, the mDOM features a large sensitive area distributed nearly homogeneously over the full solid angle. The use of multiple, individually read-out PMTs allows directional information to be obtained for the registered photons and enables the use of multiplicity triggering within a single module, e.g., for background suppression. The challenges driving the mDOM development included tight restrictions on module size, data-transfer rate, and power consumption as well as the harsh environment in the deep ice at the South Pole. In this contribution we present the final mDOM design that meets these challenges. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Comments: Presented at the 37th International Cosmic Ray Conference (ICRC 2021). See arXiv:2107.06966 for all IceCube contributions

Report number: PoS-ICRC2021-1070

The IceCube Neutrino Observatory: Instrumentation and Online Systems

Authors: IceCube Collaboration, M. G. Aartsen, M. Ackermann, J. Adams, J. A. Aguilar, M. Ahlers, M. Ahrens, D. Altmann, K. Andeen, T. Anderson, I. Ansseau, G. Anton, M. Archinger, C. Argüelles, R. Auer, J. Auffenberg, S. Axani, J. Baccus, X. Bai, S. Barnet, S. W. Barwick, V. Baum, R. Bay, K. Beattie, J. J. Beatty , et al. (328 additional authors not shown)

Abstract: The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable sy… ▽ More The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade. △ Less

Submitted 6 February, 2024; v1 submitted 15 December, 2016; originally announced December 2016.

Comments: 82 pages, 50 figures; fix minor error in eq. 3.9 (time calibration cable delay)

Journal ref: JINST 12 P03012 (2017)

Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)

Authors: The CTA Consortium, :, A. Abchiche, U. Abeysekara, Ó. Abril, F. Acero, B. S. Acharya, C. Adams, G. Agnetta, F. Aharonian, A. Akhperjanian, A. Albert, M. Alcubierre, J. Alfaro, R. Alfaro, A. J. Allafort, R. Aloisio, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio, J. Anderson, M. Anduze, E. O. Angüner , et al. (1387 additional authors not shown)

Abstract: List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: Index of CTA conference proceedings for the Gamma 2016, Heidelberg, Germany

CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)

Authors: The CTA Consortium, :, A. Abchiche, U. Abeysekara, Ó. Abril, F. Acero, B. S. Acharya, M. Actis, G. Agnetta, J. A. Aguilar, F. Aharonian, A. Akhperjanian, A. Albert, M. Alcubierre, R. Alfaro, E. Aliu, A. J. Allafort, D. Allan, I. Allekotte, R. Aloisio, J. -P. Amans, E. Amato, L. Ambrogi, G. Ambrosi, M. Ambrosio , et al. (1290 additional authors not shown)

Abstract: List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands. List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands. △ Less

Submitted 11 September, 2015; v1 submitted 24 August, 2015; originally announced August 2015.

Comments: Index of CTA conference proceedings at the ICRC2015, The Hague (The Netherlands). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted; v2: final with arXiv links to all CTA contributions and full author list

A versatile digital camera trigger for telescopes in the Cherenkov Telescope Array

Authors: U. Schwanke, M. Shayduk, K. -H. Sulanke, S. Vorobiov, R. Wischnewski

Abstract: This paper describes the concept of an FPGA-based digital camera trigger for imaging atmospheric Cherenkov telescopes, developed for the future Cherenkov Telescope Array (CTA). The proposed camera trigger is designed to select images initiated by the Cherenkov emission of extended air showers from very-high energy (VHE, E>20 GeV) photons and charged particles while suppressing signatures from back… ▽ More This paper describes the concept of an FPGA-based digital camera trigger for imaging atmospheric Cherenkov telescopes, developed for the future Cherenkov Telescope Array (CTA). The proposed camera trigger is designed to select images initiated by the Cherenkov emission of extended air showers from very-high energy (VHE, E>20 GeV) photons and charged particles while suppressing signatures from background light. The trigger comprises three stages. A first stage employs programmable discriminators to digitize the signals arriving from the camera channels (pixels). At the second stage, a grid of low-cost FPGAs is used to process the digitized signals for camera regions with 37 pixels. At the third stage, trigger conditions found independently in any of the overlap** 37-pixel regions are combined into a global camera trigger by few central FPGAs. Trigger prototype boards based on Xilinx FPGAs have been designed, built and tested and were shown to function properly. Using these components a full camera trigger with a power consumption and price per channel of about 0.5 W and 19 Euro, respectively, can be built. With the described design the camera trigger algorithm can take advantage of pixel information in both the space and the time domain allowing, for example, the creation of triggers sensitive to the time-gradient of a shower image; the time information could also be exploited to online adjust the time window of the acquisition system for pixel data. Combining the results of the parallel execution of different trigger algorithms (optimized, for example, for the lowest and highest energies, respectively) on each FPGA can result in a better response over all photons energies (as demonstrated by Monte Carlo simulation in this work). △ Less

Submitted 19 February, 2015; originally announced February 2015.

Comments: To be published in NIM A

Introducing TAXI: a Transportable Array for eXtremely large area Instrumentation studies

Authors: T. Karg, A. Haungs, M. Kleifges, R. Nahnhauer, K. -H. Sulanke

Abstract: A common challenge in many experiments in high-energy astroparticle physics is the need for sparse instrumentation in areas of 100 km2 and above, often in remote and harsh environments. All these arrays have similar requirements for read-out and communication, power generation and distribution, and synchronization. Within the TAXI project we are develo** a transportable, modular four-station tes… ▽ More A common challenge in many experiments in high-energy astroparticle physics is the need for sparse instrumentation in areas of 100 km2 and above, often in remote and harsh environments. All these arrays have similar requirements for read-out and communication, power generation and distribution, and synchronization. Within the TAXI project we are develo** a transportable, modular four-station test-array that allows us to study different approaches to solve the aforementioned problems in the laboratory and in the field. Well-defined interfaces will provide easy interchange of the components to be tested and easy transport and setup will allow in-situ testing at different sites. Every station consists of three well-understood 1 m2 scintillation detectors with nanosecond time resolution, which provide an air shower trigger. An additional sensor, currently a radio antenna for air shower detection in the 100 MHz band, is connected for testing and calibration purposes. We introduce the TAXI project and report the status and performance of the first TAXI station deployed at the Zeuthen site of DESY. △ Less

Submitted 17 October, 2014; originally announced October 2014.

Comments: 4 pages, 3 figures, presented at ARENA 2014, Annapolis, MD, June 2014

Development of the Photomultiplier-Tube Readout System for the CTA Large Size Telescope

Authors: H. Kubo, R. Paoletti, Y. Awane, A. Bamba, M. Barcelo, J. A. Barrio, O. Blanch, J. Boix, C. Delgado, D. Fink, D. Gascon, S. Gunji, R. Hagiwara, Y. Hanabata, K. Hatanaka, M. Hayashida, M. Ikeno, S. Kabuki, H. Katagiri, J. Kataoka, Y. Konno, S. Koyama, T. Kishimoto, J. Kushida, G. Martinez , et al. (29 additional authors not shown)

Abstract: We have developed a prototype of the photomultiplier tube (PMT) readout system for the Cherenkov Telescope Array (CTA) Large Size Telescope (LST). Two thousand PMTs along with their readout systems are arranged on the focal plane of each telescope, with one readout system per 7-PMT cluster. The Cherenkov light pulses generated by the air showers are detected by the PMTs and amplified in a compact,… ▽ More We have developed a prototype of the photomultiplier tube (PMT) readout system for the Cherenkov Telescope Array (CTA) Large Size Telescope (LST). Two thousand PMTs along with their readout systems are arranged on the focal plane of each telescope, with one readout system per 7-PMT cluster. The Cherenkov light pulses generated by the air showers are detected by the PMTs and amplified in a compact, low noise and wide dynamic range gain block. The output of this block is then digitized at a sampling rate of the order of GHz using the Domino Ring Sampler DRS4, an analog memory ASIC developed at Paul Scherrer Institute. The sampler has 1,024 capacitors per channel and four channels are cascaded for increased depth. After a trigger is generated in the system, the charges stored in the capacitors are digitized by an external slow sampling ADC and then transmitted via Gigabit Ethernet. An onboard FPGA controls the DRS4, trigger threshold, and Ethernet transfer. In addition, the control and monitoring of the Cockcroft-Walton circuit that provides high voltage for the 7-PMT cluster are performed by the same FPGA. A prototype named Dragon has been developed that has successfully sampled PMT signals at a rate of 2 GHz, and generated single photoelectron spectra. △ Less

Submitted 12 July, 2013; originally announced July 2013.

Comments: In Proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), Rio de Janeiro (Brazil). All CTA contributions at arXiv:1307.2232

CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)

Authors: The CTA Consortium, :, O. Abril, B. S. Acharya, M. Actis, G. Agnetta, J. A. Aguilar, F. Aharonian, M. Ajello, A. Akhperjanian, M. Alcubierre, J. Aleksic, R. Alfaro, E. Aliu, A. J. Allafort, D. Allan, I. Allekotte, R. Aloisio, E. Amato, G. Ambrosi, M. Ambrosio, J. Anderson, E. O. Angüner, L. A. Antonelli, V. Antonuccio , et al. (1082 additional authors not shown)

Abstract: Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil △ Less

Submitted 29 July, 2013; v1 submitted 8 July, 2013; originally announced July 2013.

Comments: Index of CTA conference proceedings at the ICRC2013, Rio de Janeiro (Brazil). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted. v2: final with arXiv links to all CTA contributions and full author list

IceCube Collaboration Contributions to the 2009 International Cosmic Ray Conference

Authors: R. Abbasi, Y. Abdou, T. Abu-Zayyad, J. Adams, J. A. Aguilar, M. Ahlers, K. Andeen, J. Auffenberg, X. Bai, M. Baker, S. W. Barwick, R. Bay, J. L. Bazo Alba, K. Beattie, J. J. Beatty, S. Bechet, J. K. Becker, K. -H. Becker, M. L. Benabderrahmane, J. Berdermann, P. Berghaus, D. Berley, E. Bernardini, D. Bertrand, D. Z. Besson , et al. (234 additional authors not shown)

Abstract: IceCube Collaboration Contributions to the 2009 International Cosmic Ray Conference IceCube Collaboration Contributions to the 2009 International Cosmic Ray Conference △ Less

Submitted 19 April, 2010; v1 submitted 12 April, 2010; originally announced April 2010.

Comments: Index file for IceCube contributions to the 2009 ICRC; corrected author list

QPACE -- a QCD parallel computer based on Cell processors

Authors: H. Baier, H. Boettiger, M. Drochner, N. Eicker, U. Fischer, Z. Fodor, A. Frommer, C. Gomez, G. Goldrian, S. Heybrock, D. Hierl, M. Hüsken, T. Huth, B. Krill, J. Lauritsen, T. Lippert, T. Maurer, B. Mendl, N. Meyer, A. Nobile, I. Ouda, M. Pivanti, D. Pleiter, M. Ries, A. Schäfer , et al. (10 additional authors not shown)

Abstract: QPACE is a novel parallel computer which has been developed to be primarily used for lattice QCD simulations. The compute power is provided by the IBM PowerXCell 8i processor, an enhanced version of the Cell processor that is used in the Playstation 3. The QPACE nodes are interconnected by a custom, application optimized 3-dimensional torus network implemented on an FPGA. To achieve the very hig… ▽ More QPACE is a novel parallel computer which has been developed to be primarily used for lattice QCD simulations. The compute power is provided by the IBM PowerXCell 8i processor, an enhanced version of the Cell processor that is used in the Playstation 3. The QPACE nodes are interconnected by a custom, application optimized 3-dimensional torus network implemented on an FPGA. To achieve the very high packaging density of 26 TFlops per rack a new water cooling concept has been developed and successfully realized. In this paper we give an overview of the architecture and highlight some important technical details of the system. Furthermore, we provide initial performance results and report on the installation of 8 QPACE racks providing an aggregate peak performance of 200 TFlops. △ Less

Submitted 23 December, 2009; v1 submitted 11 November, 2009; originally announced November 2009.

Comments: 21 pages. Poster by T. Maurer and plenary talk by D. Pleiter presented at the "XXVII International Symposium on Lattice Field Theory", July 26-31 2009, Peking University, Bei**g, China. Information on recent Green500 ranking added and list of authors extended

Journal ref: PoS LAT2009:001,2009

Feasibility of acoustic neutrino detection in ice: Design and performance of the South Pole Acoustic Test Setup (SPATS)

Authors: S. Boeser, C. Bohm, F. Descamps, J. Fischer, A. Hallgren, R. Heller, S. Hundertmark, K. Krieger, R. Nahnhauer, M. Pohl, P. B. Price, K. -H. Sulanke, D. Tosi, J. Vandenbroucke

Abstract: The South Pole Acoustic Test Setup (SPATS) has been built to evaluate the acoustic characteristics of the South Pole ice in the 10 to 100 kHz frequency range so that the feasibility and specific design of an acoustic neutrino detection array at South Pole can be evaluated. SPATS consists of three vertical strings that were deployed in the upper 400 meters of the South Pole ice cap in January 200… ▽ More The South Pole Acoustic Test Setup (SPATS) has been built to evaluate the acoustic characteristics of the South Pole ice in the 10 to 100 kHz frequency range so that the feasibility and specific design of an acoustic neutrino detection array at South Pole can be evaluated. SPATS consists of three vertical strings that were deployed in the upper 400 meters of the South Pole ice cap in January 2007, using the upper part of IceCube holes. The strings form a triangular array with the longest baseline 421 meters. Each of them has 7 stages with one transmitter and one sensor module. Both are equipped with piezoelectric ceramic elements in order to produce or detect sound. Analog signals are brought to the surface on electric cables where they are digitized by a PC-based data acquisition system. The data from all three strings are collected on a master-PC in a central facility, from which they are sent to the northern hemisphere via a satellite link or locally stored on tape. A technical overview of the SPATS detector and its performance is presented. △ Less

Submitted 29 July, 2008; originally announced July 2008.

Comments: To appear in the Proceedings of the International Cosmic Ray Conference, 2007

Feasibility of acoustic neutrino detection in ice: First results from the South Pole Acoustic Test Setup (SPATS)

Authors: S. Böser, C. Bohm, F. Descamps, J. Fischer, A. Hallgren, R. Heller, S. Hundertmark, K. Krieger, R. Nahnhauer, M. Pohl, P. B. Price, K. -H. Sulanke, D. Tosi, J. Vandenbroucke

Abstract: Astrophysical neutrinos in the EeV range (particularly those generated by the interaction of cosmic rays with the cosmic microwave background) promise to be a valuable tool to study astrophysics and particle physics at the highest energies. Much could be learned from temporal, spectral, and angular distributions of ~100 events, which could be collected by a detector with ~100 km^3 effective volu… ▽ More Astrophysical neutrinos in the EeV range (particularly those generated by the interaction of cosmic rays with the cosmic microwave background) promise to be a valuable tool to study astrophysics and particle physics at the highest energies. Much could be learned from temporal, spectral, and angular distributions of ~100 events, which could be collected by a detector with ~100 km^3 effective volume in a few years. Scaling the optical Cherenkov technique to this scale is prohibitive. However, using the thick ice sheet available at the South Pole, the radio and acoustic techniques promise to provide sufficient sensitivity with sparse instrumentation. The best strategy may be a hybrid approach combining all three techniques. A new array of acoustic transmitters and sensors, the South Pole Acoustic Test Setup, was installed in three IceCube holes in January 2007. The purpose of SPATS is to measure the attenuation length, background noise, and sound speed for 10-100 kHz acoustic waves. Favorable results would pave the way for a large hybrid array. SPATS is the first array to study the possibility of acoustic neutrino detection in ice, the medium expected to be best for the purpose. First results from SPATS are presented. △ Less

Submitted 15 August, 2007; originally announced August 2007.

Comments: To appear in the Proceedings of the International Cosmic Ray Conference, 2007