-
Paraxial forward-scatter field analysis for a THz pulse traveling down a highly overmoded iris-line waveguide
Authors:
Adham Naji,
Gennady Stupakov
Abstract:
Highly overmoded iris-line structures carry desirable features for the efficient transportation of THz radiation over long distances. Previous studies have analyzed the iris line, modeled approximately as a long open-resonator structure with thin screens, using methods such as Vainstein's impedance boundary condition or perturbative mode matching. The aim in those methods was to seek the eigensolu…
▽ More
Highly overmoded iris-line structures carry desirable features for the efficient transportation of THz radiation over long distances. Previous studies have analyzed the iris line, modeled approximately as a long open-resonator structure with thin screens, using methods such as Vainstein's impedance boundary condition or perturbative mode matching. The aim in those methods was to seek the eigensolution that represents the dominant (least lossy) propagation mode in a long iris-line structure at steady state. In this paper, a forward-traveling wave analysis is presented, wherein a short THz pulse paraxially traverses the oversized structure cell by cell, including the transient regime. The iris line's periodic discontinuities are analyzed in terms of forward-wave orthogonal mode decompositions, which are then used to build a 'forward-scatter' model (matrix) for each cell. The presented approach predicts a diffraction loss behavior that agrees with that of the eigensolution found by the previous analytical methods at the steady state for a long waveguide, but adds the ability of analyzing waveguides of finite lengths, showing transients as they evolve and settle to the dominant mode down the line, and offers numerical implementation speeds that are typically an order-of-magnitude faster than those previously reported for the mode-matching method. This approach may also be easily extended to analyze iris lines with mechanical imperfections (e.g. misalignments or aperiodic defects), allowing for investigations of performance sensitivity against manufacturing tolerances.
△ Less
Submitted 30 November, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Noise In Intense Electron Bunches
Authors:
S. Nagaitsev,
Y. -K. Kim,
Z. Huang,
G. Stupakov,
. Broemmelsiek,
J. Jarvis,
A. H. Lumpkin J. Ruan,
G. Saewert,
R. Thurman-Keup
Abstract:
We report on our investigations into density fluctuations in electron bunches. Noise and density fluctuations in relativistic electron bunches, accelerated in a linac, are of critical importance to various Coherent Electron Cooling (CEC) [1-5] concepts as well as to free-electron lasers (FELs). For CEC, the beam noise results in additional diffusion that counteracts cooling. In SASE FELs, a micro-…
▽ More
We report on our investigations into density fluctuations in electron bunches. Noise and density fluctuations in relativistic electron bunches, accelerated in a linac, are of critical importance to various Coherent Electron Cooling (CEC) [1-5] concepts as well as to free-electron lasers (FELs). For CEC, the beam noise results in additional diffusion that counteracts cooling. In SASE FELs, a micro-wave instability starts from the initial noise in the beam and eventually leads to the beam microbunching yielding coherent radiation, and the initial noise in the FEL bandwidth plays a useful role. In seeded FELs, in contrast, such noise interferes with the seed signal, so that reducing noise at the initial seed wavelength would lower the seed laser power requirement [6-8]. Status of the project will be presented.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Schottky Signal Modification as a Diagnostic Tool for Coherent Electron Cooling
Authors:
W. F. Bergan,
M. Blaskiewicz,
G. Stupakov
Abstract:
Coherent electron cooling is a promising technique to cool high-intensity hadron bunches by imprinting the noise in the hadron beam on a beam of electrons, amplifying the electron density modulations, and using them to apply cooling kicks to the hadrons. The typical size for these perturbations can be on the $μ$m scale, allowing us to extend the reach of classical stochastic cooling by several ord…
▽ More
Coherent electron cooling is a promising technique to cool high-intensity hadron bunches by imprinting the noise in the hadron beam on a beam of electrons, amplifying the electron density modulations, and using them to apply cooling kicks to the hadrons. The typical size for these perturbations can be on the $μ$m scale, allowing us to extend the reach of classical stochastic cooling by several orders of magnitude. However, it is crucial to ensure that the electron and hadron beams are longitudinally aligned within this same $μ$m scale. In order to provide fast feedback for this process, we discuss the extension of signal suppression to coherent electron cooling, and show in both theory and simulation that certain components of the spectral noise in the hadron beam will be predictably modified at the several percent level, which may be detected by observations of the radiation of the hadron beam.
△ Less
Submitted 25 August, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Field Analysis for a Highly-Overmoded Iris Line, with Application to THz Radiation Transport at LCLS
Authors:
Adham Naji,
Gennady Stupakov,
Zhirong Huang,
Karl Bane
Abstract:
Vector field analysis is presented for a highly overmoded iris-line structure that can act as a medium of transportation for THz radiation. The axisymmetric structure is capable of supporting hybrid modes with desirable features such as low propagation loss, uniformly linear polarization and approximately-Gaussian intensity profile across the iris. A specific application that can benefit from thes…
▽ More
Vector field analysis is presented for a highly overmoded iris-line structure that can act as a medium of transportation for THz radiation. The axisymmetric structure is capable of supporting hybrid modes with desirable features such as low propagation loss, uniformly linear polarization and approximately-Gaussian intensity profile across the iris. A specific application that can benefit from these features is the transportation of THz undulator radiation over hundreds of meters to reach the experimental halls at the LCLS facility, SLAC, Stanford. Such a structure has been modelled before as a boundary-value problem using Vainstein's impedance boundary condition and assuming infinitely-thin screens. Given that physical realizations of such screens must have finite thickness and that the THz wavelength in the 3-15 THz range is expected to be smaller than convenient screen thicknesses in practice, the question of the impact of finite screen thickness on propagation performance becomes rather pressing. To address this question, we present a mode-matching analysis of the structure, with finite screen thickness and perturbatively clustered (localized) field expansions, for computational feasibility. The effect of screen thickness is seen to lower the attenuation constant on the iris line, which is dominated by diffraction loss. The propagation loss predictions based on the Vainstein-model are compared with the numerical results from mode-matching for infinitely-thin screens, where the former method is observed to agree with the numerical results better at higher Fresnel numbers (highly-overmoded structures). The properties of the dominant mode fields are formally derived from first principles and a recommended approach is discussed for the inclusion of screen-thickness effects into propagation loss estimations.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Cooling and diffusion rates in coherent electron cooling concepts
Authors:
Sergei Nagaitsev,
Valeri Lebedev,
Gennady Stupakov,
Erdong Wang,
William Bergan
Abstract:
We present analytic cooling and diffusion rates for a simplified model of coherent electron cooling (CEC), based on a proton energy kick at each turn. This model also allows to estimate analytically the rms value of electron beam density fluctuations in the "kicker" section. Having such analytic expressions should allow for better understanding of the CEC mechanism, and for a quicker analysis and…
▽ More
We present analytic cooling and diffusion rates for a simplified model of coherent electron cooling (CEC), based on a proton energy kick at each turn. This model also allows to estimate analytically the rms value of electron beam density fluctuations in the "kicker" section. Having such analytic expressions should allow for better understanding of the CEC mechanism, and for a quicker analysis and optimization of main system parameters. Our analysis is applicable to any CEC amplification mechanism, as long as the wake (kick) function is available.
△ Less
Submitted 16 June, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Diffusion regime of electron-electron collisions in weakly ionized plasmas
Authors:
B. Breizman,
G. Stupakov,
G. Vekstein
Abstract:
We consider weakly ionized plasma where frequent elastic scattering of electrons on neutrals change the individual acts and the rate of electron-electron collisions significantly. In this case, the kinetics of electron thermalization is very different from that in fully ionized plasma. The colliding electrons diffuse because of fast scattering on neutrals. We demonstrate how a proper account of th…
▽ More
We consider weakly ionized plasma where frequent elastic scattering of electrons on neutrals change the individual acts and the rate of electron-electron collisions significantly. In this case, the kinetics of electron thermalization is very different from that in fully ionized plasma. The colliding electrons diffuse because of fast scattering on neutrals. We demonstrate how a proper account of this diffusion enables one to estimate the characteristic time of electron thermalization. We also present a rigorous derivation of the kinetic equation for electrons by using Bogolyubov method based on Liouville equations for multi-particle distribution functions.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Suppression of the Fast Beam-Ion Instability by Tune Spread in the Electron Beam due to Beam-Beam Effects
Authors:
Gennady Stupakov
Abstract:
The fast beam-ion instability (FII) is caused by the interaction of an electron bunch train with the residual gas ions. The ion oscillations in the potential well of the electron beam have an inherent frequency spread due to the nonlinear profile of the potential. However, this frequency spread and associated with it Landau dam** typically is not strong enough to suppress the instability. In thi…
▽ More
The fast beam-ion instability (FII) is caused by the interaction of an electron bunch train with the residual gas ions. The ion oscillations in the potential well of the electron beam have an inherent frequency spread due to the nonlinear profile of the potential. However, this frequency spread and associated with it Landau dam** typically is not strong enough to suppress the instability. In this work, we develop a model of FII which takes into account the frequency spread in the electron beam due to the beam-beam interaction in an electron-ion collider. We show that with a large enough beam-beam parameter the fast ion instability can be suppressed. We estimate the strength of this effect for the parameters of the eRHIC electron-ion collider.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Centripetal Transverse Wakefield in Relativistic Beam
Authors:
Gennady Stupakov
Abstract:
The effect of the transverse self-force in a relativistic beam has been studied in the earlier paper of the author [1]. However, the analysis of [1] missed an important observation and has lead to an incorrect estimate of the emittance growth of the beam when it passes through a long bending magnet. Here we correct that analysis. In particular, we conclude that the emittance growth due to the tran…
▽ More
The effect of the transverse self-force in a relativistic beam has been studied in the earlier paper of the author [1]. However, the analysis of [1] missed an important observation and has lead to an incorrect estimate of the emittance growth of the beam when it passes through a long bending magnet. Here we correct that analysis. In particular, we conclude that the emittance growth due to the transverse self-force in a long bend is always much smaller than the emittance growth due to the longitudinal coherent synchrotron radiation (CSR) wake.
△ Less
Submitted 10 February, 2019; v1 submitted 30 January, 2019;
originally announced January 2019.
-
Microbunched Electron Cooling with Amplification Cascades
Authors:
G. Stupakov,
P. Baxevanis
Abstract:
The Microbunched Electron Cooling (MBEC) is a promising cooling technique that can find applications in future hadron and electron-ion colliders to counteract intrabeam scattering that limits the maximum achievable luminosity of the collider. To minimize the cooling time, one would use amplification cascades consisting of a drift section followed by a magnetic chicane. In this paper, we first deri…
▽ More
The Microbunched Electron Cooling (MBEC) is a promising cooling technique that can find applications in future hadron and electron-ion colliders to counteract intrabeam scattering that limits the maximum achievable luminosity of the collider. To minimize the cooling time, one would use amplification cascades consisting of a drift section followed by a magnetic chicane. In this paper, we first derive and optimize the gain factor in an amplification section for a simplified one-dimensional model of the beam. We then deduce the cooling rate of a system with one and two amplification cascades. We also analyze the noise effects that counteract the cooling process through the energy diffusion in the hadron beam. Our analytical formulas are confirmed by numerical simulations for a set of model parameters.
△ Less
Submitted 19 March, 2019; v1 submitted 12 December, 2018;
originally announced December 2018.
-
Cooling Rate for Microbunched Electron Cooling without Amplification
Authors:
Gennady Stupakov
Abstract:
The Microbunched Electron Cooling (MBEC) proposed by D. Ratner is a promising cooling technique that can find applications in future hadron and electron-ion colliders. In this paper, we develop a new framework for the study of MBEC which is based on the analysis of the dynamics of microscopic 1D fluctuations in the electron and hadron beams during their interaction and propagation through the syst…
▽ More
The Microbunched Electron Cooling (MBEC) proposed by D. Ratner is a promising cooling technique that can find applications in future hadron and electron-ion colliders. In this paper, we develop a new framework for the study of MBEC which is based on the analysis of the dynamics of microscopic 1D fluctuations in the electron and hadron beams during their interaction and propagation through the system. Within this framework, we derive an analytical formula for the cooling rate and benchmark it against 1D computer simulations with a agreement between the analytical and numerical results. We then calculate the expecting cooling time for a set of parameters of the proposed electron-ion collider eRHIC in a simple cooling system with one chicane in the electron channel. While the cooling rate in this system turns out to be insufficient to counteract the intra-beam scattering in the proton beam, we discuss how the electron signal can be amplified by two orders of magnitude through the use of plasma effects in the beam.
△ Less
Submitted 12 October, 2018; v1 submitted 7 June, 2018;
originally announced June 2018.
-
A novel fast simulation technique for axisymmetric PWFA configurations in the blowout regime
Authors:
P. Baxevanis,
G. Stupakov
Abstract:
In the blowout regime of plasma wakefield acceleration (PWFA), which is the most relevant configuration for current and future applications and experiments, the plasma flow that is excited by the ultra-relativistic drive beam is highly nonlinear. Thus, fast and accurate simulations codes are indispensable tools in the study of this extremely important problem. We have developed a novel algorithm t…
▽ More
In the blowout regime of plasma wakefield acceleration (PWFA), which is the most relevant configuration for current and future applications and experiments, the plasma flow that is excited by the ultra-relativistic drive beam is highly nonlinear. Thus, fast and accurate simulations codes are indispensable tools in the study of this extremely important problem. We have developed a novel algorithm that deals with the propagation of axisymmetric bunches of otherwise arbitrary profile through a cold plasma of uniform density. In contrast to the existing PWFA simulation tools, our code PLEBS (PLasma-Electron Beam Simulations) uses a new computational scheme which ensures that the transverse and longitudinal directions are completely decoupled---a feature which significantly enhances the speed and robustness of the new method. Our numerical results are benchmarked against the QuickPic code and excellent agreement is established between the two approaches. Moreover, our new technique provides a very convenient framework for studying issues such as beam loading and short-range wakefields within the plasma cavity.
△ Less
Submitted 23 October, 2017;
originally announced October 2017.
-
Short-range wakefields generated in the blowout regime of plasma-wakefield acceleration
Authors:
G. Stupakov
Abstract:
In the past, calculation of wakefields generated by an electron bunch propagating in a plasma has been carried out in linear approximation, where the plasma perturbation can be assumed small and plasma equations of motion linearized. This approximation breaks down in the blowout regime where a high-density electron driver expels plasma electrons from its path and creates a cavity void of electrons…
▽ More
In the past, calculation of wakefields generated by an electron bunch propagating in a plasma has been carried out in linear approximation, where the plasma perturbation can be assumed small and plasma equations of motion linearized. This approximation breaks down in the blowout regime where a high-density electron driver expels plasma electrons from its path and creates a cavity void of electrons in its wake. In this paper, we develop a technique that allows to calculate short-range longitudinal and transverse wakes generated by a witness bunch being accelerated inside the cavity. Our results can be used for studies of the beam loading and the hosing instability of the witness bunch in PWFA and LWFA.
△ Less
Submitted 10 November, 2017; v1 submitted 19 October, 2017;
originally announced October 2017.
-
Measurements of wake-induced electron beam deflection in a dechirper at the Linac Coherent Light Source
Authors:
Johann Zemella,
Karl Bane,
Alan Fisher,
Marc Guetg,
Zhirong Huang,
Richard Iverson,
Patrick Krejcik,
Alberto Lutman,
Timothy Maxwell,
Alexander Novokhatski,
Gennady Stupakov,
Zhen Zhang,
Mark Harrison,
Marcos Ruelas
Abstract:
The RadiaBeam/SLAC dechirper, a structure consisting of pairs of flat, metallic, corrugated plates, %a corrugated structure in flat geometry, has been installed just upstream of the undulators in the Linac Coherent Light Source (LCLS). As a dechirper, with the beam passing between the plates on axis, longitudinal wakefields are induced that can remove unwanted energy chirp in the beam. However, wi…
▽ More
The RadiaBeam/SLAC dechirper, a structure consisting of pairs of flat, metallic, corrugated plates, %a corrugated structure in flat geometry, has been installed just upstream of the undulators in the Linac Coherent Light Source (LCLS). As a dechirper, with the beam passing between the plates on axis, longitudinal wakefields are induced that can remove unwanted energy chirp in the beam. However, with the beam passing off axis, strong transverse wakes are also induced. This mode of operation has already been used for the production of intense, multi-color photon beams using the Fresh-Slice technique, and is being used to develop a diagnostic for attosecond bunch length measurements. Here we measure, as function of offset, the strength of the transverse wakefields that are excited between the two plates, and also for the case of the beam passing near to a single plate. We compare with analytical formulas from the literature, and find good agreement. This report presents the first systematic measurements of the transverse wake strength in a dechirper, one that has been excited by a bunch with the short pulse duration and high energy found in an X-ray free electron laser.
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
-
Generation of a wakefield undulator in plasma with transverse density gradient
Authors:
Gennady Stupakov
Abstract:
We show that a short relativistic electron beam propagating in a plasma with a density gradient perpendicular to the direction of motion generates a wakefield in which a witness bunch experiences a transverse force. A density gradient oscillating along the beam path would create a periodically varying force---an undulator, with an estimated strength of the equivalent magnetic field more than ten T…
▽ More
We show that a short relativistic electron beam propagating in a plasma with a density gradient perpendicular to the direction of motion generates a wakefield in which a witness bunch experiences a transverse force. A density gradient oscillating along the beam path would create a periodically varying force---an undulator, with an estimated strength of the equivalent magnetic field more than ten Tesla. This opens an avenue for creation of a high-strength, short-period undulators, which eventually may lead to all-plasma, free electron lasers where a plasma wakefield acceleration is naturally combined with a plasma undulator in a unifying, compact setup.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Estimate of Joule Heating in a Flat Dechirper
Authors:
Karl Bane,
Gennady Stupakov,
Erion Gjonaj
Abstract:
We have performed Joule power loss calculations for a flat dechirper. We have considered the configurations of the beam on-axis between the two plates---for chirp control---and for the beam especially close to one plate---for use as a fast kicker. Our calculations use a surface impedance approach, one that is valid when corrugation parameters are small compared to aperture (the perturbative parame…
▽ More
We have performed Joule power loss calculations for a flat dechirper. We have considered the configurations of the beam on-axis between the two plates---for chirp control---and for the beam especially close to one plate---for use as a fast kicker. Our calculations use a surface impedance approach, one that is valid when corrugation parameters are small compared to aperture (the perturbative parameter regime). In our model we ignore effects of field reflections at the sides of the dechirper plates, and thus expect the results to underestimate the Joule losses. The analytical results were also tested by numerical, time-domain simulations. We find that most of the wake power lost by the beam is radiated out to the sides of the plates. For the case of the beam passing by a single plate, we derive an analytical expression for the broad-band impedance, and---in Appendix B---numerically confirm recently developed, analytical formulas for the short-range wakes. While our theory can be applied to the LCLS-II dechirper with large gaps, for the nominal apertures we are not in the perturbative regime and the reflection contribution to Joule losses is not negligible. With input from computer simulations, we estimate the Joule power loss (assuming bunch charge of 300 pC, repetition rate of 100 kHz) is 21~W/m for the case of two plates, and 24 W/m for the case of a single plate.
△ Less
Submitted 6 February, 2017;
originally announced February 2017.
-
Stimulated X-ray Raman scattering in Free Electron Lasers with incoherent spectrum
Authors:
Gennady Stupakov,
Max Zolotorev
Abstract:
The single-pulse spectrum of self-amplified spontaneous emission (SASE) free electron lasers (FELs) is characterized by random fluctuations in frequency. The typical spectrum bandwidth for a hard x-ray FEL is in the range of 10-20 eV and is comparable with the distance between energy levels of valence electrons in atoms an molecules. We calculate the rate of transitions in a quantum three-level sy…
▽ More
The single-pulse spectrum of self-amplified spontaneous emission (SASE) free electron lasers (FELs) is characterized by random fluctuations in frequency. The typical spectrum bandwidth for a hard x-ray FEL is in the range of 10-20 eV and is comparable with the distance between energy levels of valence electrons in atoms an molecules. We calculate the rate of transitions in a quantum three-level system with the energy difference of several eV caused by such radiation and show that for x-ray intensities in the range of $10^{20}$ W/cm$^2$ the probability of the transition over the duration of the x-ray pulse is large. We argue that this effect can be used to modify the spectrum of a SASE FEL potentially making it more narrow.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Giant Terahertz Pulses Generated by Relativistic Beam in a Dielectric Channel
Authors:
G. Stupakov,
S. Gessner
Abstract:
We analyze the electromagnetic field of a short relativistic electron beam propagating in a round, hollow dielectric channel. We show that if the beam propagates with an offset relative to the axis of the channel, in a steady state, its electromagnetic field outside of the channel extends to large radii and carries an energy that scales as the Lorentz factor $γ$ squared (in contrast to the scaling…
▽ More
We analyze the electromagnetic field of a short relativistic electron beam propagating in a round, hollow dielectric channel. We show that if the beam propagates with an offset relative to the axis of the channel, in a steady state, its electromagnetic field outside of the channel extends to large radii and carries an energy that scales as the Lorentz factor $γ$ squared (in contrast to the scaling $\lnγ$ without the channel). When this energy is converted into a terahertz pulse and focused on a target, the electric field in the focus can greatly exceed typical values of the field that are currently achieved by sending beams through thin metallic foils.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Wakefields of a Beam near a Single Plate in a Flat Dechirper
Authors:
Karl Bane,
Gennady Stupakov,
Igor Zagorodnov
Abstract:
We give formulas for the longitudinal, transverse, and quad point charge wakes for a short bunch of electrons passing by one plate of a flat dechirper.
We give formulas for the longitudinal, transverse, and quad point charge wakes for a short bunch of electrons passing by one plate of a flat dechirper.
△ Less
Submitted 28 November, 2016;
originally announced November 2016.
-
Measurements of Terahertz Radiation Generated using a Metallic, Corrugated Pipe
Authors:
Karl Bane,
Gennady Stupakov,
Sergey Antipov,
Mikhail Fedurin,
Karl Kusche,
Christina Swinson,
Dao Xiang
Abstract:
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-p…
▽ More
A method for producing narrow-band THz radiation proposes passing an ultra-relativistic beam through a metallic pipe with small periodic corrugations. We present results of a measurement of such an arrangement at Brookhaven's Accelerator Test Facility (ATF). Our pipe was copper and was 5 cm long; the aperture was cylindrically symmetric, with a 1 mm (radius) bore and a corrugation depth (peak-to-peak) of 60 um. In the experiment we measured both the effect on the beam of the structure wakefield and the spectral properties of the radiation excited by the beam. We began by injecting a relatively long beam compared to the wavelength of the radiation, but with short rise time, to excite the structure, and then used a downstream spectrometer to infer the radiation wavelength. This was followed by injecting a shorter bunch, and then using an interferometer (also downstream of the corrugated pipe) to measure the spectrum of the induced THz radiation. For the THz pulse we obtain and compare with calculations: the central frequency, the bandwidth, and the spectral power---compared to a diffraction radiation background signal.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
Dispersion Relation of a Surface Wave at a Rough Metal-Air Interface
Authors:
Igor Kotelnikov,
Gennady Stupakov
Abstract:
We derived a dispersion relation of a surface wave at a rough metal-air interface. In contrast to previous publications, we assumed that an intrinsic surface impedance due to a finite electric conductivity of the metal can be of the same order as the roughness-induced impedance. We then applied our results to the analysis of a long-standing problem of the discrepancy between the experimental data…
▽ More
We derived a dispersion relation of a surface wave at a rough metal-air interface. In contrast to previous publications, we assumed that an intrinsic surface impedance due to a finite electric conductivity of the metal can be of the same order as the roughness-induced impedance. We then applied our results to the analysis of a long-standing problem of the discrepancy between the experimental data on the propagation of surface waves in the terahertz range of frequencies and the classical Drude theory.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Wake excited in plasma by an ultra-relativistic point-like bunch
Authors:
G. Stupakov,
B. Breizman,
V. Khudik,
G. Shvets
Abstract:
A plasma flow behind a relativistic electron bunch propagating through a cold plasma is found assuming that the transverse and longitudinal dimensions of the bunch are small and the bunch can be treated as a point charge. In addition, the bunch charge is assumed small. A simplified system of equations for the plasma electrons is derived and it is shown that, through a simple rescaling of variables…
▽ More
A plasma flow behind a relativistic electron bunch propagating through a cold plasma is found assuming that the transverse and longitudinal dimensions of the bunch are small and the bunch can be treated as a point charge. In addition, the bunch charge is assumed small. A simplified system of equations for the plasma electrons is derived and it is shown that, through a simple rescaling of variables, the bunch charge can be eliminated from the equations. These equations have a unique solution, with an ion cavity formed behind the driver. The equations are solved numerically and the scaling of the cavity dimensions with the driver charge is obtained. A numerical solution for the case of a positively charged driver is also found.
△ Less
Submitted 7 June, 2016;
originally announced June 2016.
-
Analytical Formulas for Short Bunch Wakes in a Flat Dechirper
Authors:
K. Bane,
G. Stupakov,
I. Zagorodnov
Abstract:
We develop analytical models of the longitudinal and transverse wakes, on and off axis for realistic structures, and then compare them with numerical calculations, and generally find good agreement. These analytical "first order" formulas approximate the droop at the origin of the longitudinal wake and of the slope of the transverse wakes; they represent an improvement in accuracy over earlier, "z…
▽ More
We develop analytical models of the longitudinal and transverse wakes, on and off axis for realistic structures, and then compare them with numerical calculations, and generally find good agreement. These analytical "first order" formulas approximate the droop at the origin of the longitudinal wake and of the slope of the transverse wakes; they represent an improvement in accuracy over earlier, "zeroth order" formulas. In example calculations for the RadiaBeam/LCLS dechirper using typical parameters, we find a 16\% droop in the energy chirp at the bunch tail compared to simpler calculations. With the beam moved to 200~$μ$m from one jaw in one dechiper section, one can achieve a 3~MV transverse kick differential over a 30~$μ$m length.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Dechirper Wakefields for Short Bunches
Authors:
Karl Bane,
Gennady Stupakov
Abstract:
In previous work [1] general expressions, valid for arbitrary bunch lengths, were derived for the wakefields of corrugated structures with flat geometry, such as is used in the RadiaBeam/LCLS dechirper. However, the bunch at the end of linac-based X-ray FELs--like the LCLS--is extremely short, and for short bunches the wakes can be considerably simplified. In this work, we first derive analytical…
▽ More
In previous work [1] general expressions, valid for arbitrary bunch lengths, were derived for the wakefields of corrugated structures with flat geometry, such as is used in the RadiaBeam/LCLS dechirper. However, the bunch at the end of linac-based X-ray FELs--like the LCLS--is extremely short, and for short bunches the wakes can be considerably simplified. In this work, we first derive analytical approximations to the short-range wakes. These are generalized wakes, in the sense that their validity is not limited to a small neighborhood of the symmetry axis, but rather extends to arbitrary transverse offsets of driving and test particles. The validity of these short-bunch wakes holds not only for the corrugated structure, but rather for any flat structure whose beam-cavity interaction can be described by a surface impedance. We use these wakes to obtain, for a short bunch passing through a dechirper: estimates of the energy loss as function of gap, the transverse kick as function of beam offset, the slice energy spread increase, and the emittance growth. In the Appendix, a more accurate derivation--than is found in [1]--of the arbitrary bunch length wakes is performed; we find full agreement with the earlier results, provided the bunches are short compared to the dechirper gap, which is normally the regime of interest.
[1] K. Bane and G. Stupakov, Phys. Rev. ST Accel. Beams 18, 034401(2015).
△ Less
Submitted 22 March, 2016; v1 submitted 26 January, 2016;
originally announced January 2016.
-
Analytical theory of coherent synchrotron radiation wakefield of short bunches shielded by conducting parallel plates
Authors:
Gennady Stupakov,
Demin Zhou
Abstract:
We develop a general model of coherent synchrotron radiation (CSR) impedance with shielding provided by two parallel conducting plates. This model allows us to easily reproduce all previously known analytical CSR wakes and to expand the analysis to the situations not explored before. It reduces calculations of the impedance to taking integrals along the trajectory of the beam. New analytical resul…
▽ More
We develop a general model of coherent synchrotron radiation (CSR) impedance with shielding provided by two parallel conducting plates. This model allows us to easily reproduce all previously known analytical CSR wakes and to expand the analysis to the situations not explored before. It reduces calculations of the impedance to taking integrals along the trajectory of the beam. New analytical results are derived for the radiation impedance with shielding for the following orbits: a kink, a bending magnet, a wiggler of finite length, and an infinitely long wiggler. All our formulas are benchmarked agains numerical simulations with the CSRZ computer code.
△ Less
Submitted 15 January, 2016;
originally announced January 2016.
-
Calculation of wakefields in 2D rectangular structures
Authors:
I. Zagorodnov,
K. L. F Bane,
G. Stupakov
Abstract:
We consider the calculation of electromagnetic fields generated by an electron bunch passing through a vacuum chamber structure that, in general, consists of an entry pipe, followed by some kind of transition or cavity, and ending in an exit pipe. We limit our study to structures having rectangular cross-section, where the height can vary as function of longitudinal coordinate but the width and si…
▽ More
We consider the calculation of electromagnetic fields generated by an electron bunch passing through a vacuum chamber structure that, in general, consists of an entry pipe, followed by some kind of transition or cavity, and ending in an exit pipe. We limit our study to structures having rectangular cross-section, where the height can vary as function of longitudinal coordinate but the width and side walls remain fixed. For such structures, we derive a Fourier representation of the wake potentials through one-dimensional functions. A new numerical approach for calculating the wakes in such structures is proposed and implemented in the computer code ECHO(2D). The computation resource requirements for this approach are moderate and comparable to those for finding the wakes in 2D rotationally symmetric structures. Numerical examples obtained with the new numerical code are presented.
△ Less
Submitted 31 August, 2015; v1 submitted 31 July, 2015;
originally announced August 2015.
-
Demonstration of nonlinear-energy-spread compensation in relativistic electron bunches with corrugated structures
Authors:
Feichao Fu,
Rui Wang,
Pengfei Zhu,
Lingrong Zhao,
Tao Jiang,
Chao Lu,
Shengguang Liu,
Libin Shi,
Lixin Yan,
Haixiao Deng,
Chao Feng,
Qiang Gu,
Dazhang Huang,
Bo Liu,
Dong Wang,
Xingtao Wang,
Meng Zhang,
Zhentang Zhao,
Gennady Stupakov,
Dao Xiang,
Jie Zhang
Abstract:
High quality electron beams with flat distributions in both energy and current are critical for many accelerator-based scientific facilities such as free-electron lasers and MeV ultrafast electron diffraction and microscopes. In this Letter we report on using corrugated structures to compensate for the beam nonlinear energy chirp imprinted by the curvature of the radio-frequency field, leading to…
▽ More
High quality electron beams with flat distributions in both energy and current are critical for many accelerator-based scientific facilities such as free-electron lasers and MeV ultrafast electron diffraction and microscopes. In this Letter we report on using corrugated structures to compensate for the beam nonlinear energy chirp imprinted by the curvature of the radio-frequency field, leading to a significant reduction in beam energy spread. By using a pair of corrugated structures with orthogonal orientations, we show that the quadrupole wake fields which otherwise increase beam emittance can be effectively canceled. This work also extends the applications of corrugated structures to the low beam charge (a few pC) and low beam energy (a few MeV) regime and may have a strong impact in many accelerator-based facilities.
△ Less
Submitted 23 March, 2015;
originally announced March 2015.
-
Using pipe with corrugated walls for a sub-terahertz FEL
Authors:
Gennady Stupakov
Abstract:
It has been noted in the past, in the study of the wall-roughness impedance, that a metallic pipe with corrugated walls supports propagation of a high-frequency mode that is in resonance with a relativistic beam. This mode can be excited by a beam whose length is a fraction of the wavelength. In this paper, we study another option of excitation of the resonant mode in a metallic pipe with corrugat…
▽ More
It has been noted in the past, in the study of the wall-roughness impedance, that a metallic pipe with corrugated walls supports propagation of a high-frequency mode that is in resonance with a relativistic beam. This mode can be excited by a beam whose length is a fraction of the wavelength. In this paper, we study another option of excitation of the resonant mode in a metallic pipe with corrugated walls---via the mechanism of the free electron laser instability. This mechanism works if the bunch length is much longer than the wavelength of the radiation.
△ Less
Submitted 12 December, 2014;
originally announced December 2014.
-
Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II
Authors:
K. Bane,
G. Stupakov
Abstract:
We investigate the effect of wall roughness on the wakefield-induced energy variation in the undulator beam pipe of LCLS-II. We find that a wall roughness equivalent to an rms surface slope of 30 mr increases the total induced energy variation within the bunch (due to the resistive wall wake) by a modest 20%.
We investigate the effect of wall roughness on the wakefield-induced energy variation in the undulator beam pipe of LCLS-II. We find that a wall roughness equivalent to an rms surface slope of 30 mr increases the total induced energy variation within the bunch (due to the resistive wall wake) by a modest 20%.
△ Less
Submitted 1 May, 2014;
originally announced May 2014.
-
Beam by design: laser manipulation of electrons in modern accelerators
Authors:
Erik Hemsing,
Gennady Stupakov,
Dao Xiang,
Alexander Zholents
Abstract:
Accelerator-based light sources such as storage rings and free-electron lasers use relativistic electron beams to produce intense radiation over a wide spectral range for fundamental research in physics, chemistry, materials science, biology and medicine. More than a dozen such sources operate worldwide, and new sources are being built to deliver radiation that meets with the ever increasing sophi…
▽ More
Accelerator-based light sources such as storage rings and free-electron lasers use relativistic electron beams to produce intense radiation over a wide spectral range for fundamental research in physics, chemistry, materials science, biology and medicine. More than a dozen such sources operate worldwide, and new sources are being built to deliver radiation that meets with the ever increasing sophistication and depth of new research. Even so, conventional accelerator techniques often cannot keep pace with new demands and, thus, new approaches continue to emerge. In this article, we review a variety of recently developed and promising techniques that rely on lasers to manipulate and rearrange the electron distribution in order to tailor the properties of the radiation. Basic theories of electron-laser interactions, techniques to create micro- and nano-structures in electron beams, and techniques to produce radiation with customizable waveforms are reviewed. We overview laser-based techniques for the generation of fully coherent x-rays, mode-locked x-ray pulse trains, light with orbital angular momentum, and attosecond or even zeptosecond long coherent pulses in free-electron lasers. Several methods to generate femtosecond pulses in storage rings are also discussed. Additionally, we describe various schemes designed to enhance the performance of light sources through precision beam preparation including beam conditioning, laser heating, emittance exchange, and various laser-based diagnostics. Together these techniques represent a new emerging concept of "beam by design" in modern accelerators, which is the primary focus of this article
△ Less
Submitted 9 April, 2014;
originally announced April 2014.
-
Electromagnetic surface waves on a conducting cylinder
Authors:
I. A. Kotelnikov,
G. V. Stupakov
Abstract:
We study propagation of electromagnetic surface waves on a metal-air interface in the case when the wave frequency is below the plasma frequency. We derive a reduced wave equation for a metal cylinder with a given radius of curvature. Using the Leontovich boundary condition we find solutions to this equation which we classify as outgoing and incoming surface waves. We derive the dispersion relatio…
▽ More
We study propagation of electromagnetic surface waves on a metal-air interface in the case when the wave frequency is below the plasma frequency. We derive a reduced wave equation for a metal cylinder with a given radius of curvature. Using the Leontovich boundary condition we find solutions to this equation which we classify as outgoing and incoming surface waves. We derive the dispersion relations of the surface waves of both types and argue that the earlier studies overlooked the waves of the second type although they are the only type which can propagate on a planar metal-air boundary.
△ Less
Submitted 15 February, 2015; v1 submitted 31 March, 2014;
originally announced April 2014.
-
Impedance Calculations of Non-Axisymmetric Transitions Using the Optical Approximation
Authors:
K. L. F. Bane,
G. Stupakov,
I. Zagorodnov
Abstract:
In a companion report, we have derived a method for finding the impedance at high frequencies of vacuum chamber transitions that are short compared to the catch-up distance, in a frequency regime that (in analogy to geometric optics for light) we call the optical regime. In this report we apply the method to various non-axisymmetric geometries such as irises/short collimators in a beam pipe, ste…
▽ More
In a companion report, we have derived a method for finding the impedance at high frequencies of vacuum chamber transitions that are short compared to the catch-up distance, in a frequency regime that (in analogy to geometric optics for light) we call the optical regime. In this report we apply the method to various non-axisymmetric geometries such as irises/short collimators in a beam pipe, step-in transitions, step-out transitions, and more complicated transitions of practical importance. Most of our results are analytical, with a few given in terms of a simple one dimensional integral. Our results are compared to wakefield simulations with the time-domain, finite-difference program ECHO, and excellent agreement is found.
△ Less
Submitted 19 March, 2007;
originally announced March 2007.
-
Optical approximation in the theory of geometric impedance
Authors:
G. Stupakov,
K. L. F. Bane,
I. Zagorodnov
Abstract:
In this paper we introduce an optical approximation into the theory of impedance calculation, one valid in the limit of high frequencies. This approximation neglects diffraction effects in the radiation process, and is conceptually equivalent to the approximation of geometric optics in electromagnetic theory. Using this approximation, we derive equations for the longitudinal impedance for arbitr…
▽ More
In this paper we introduce an optical approximation into the theory of impedance calculation, one valid in the limit of high frequencies. This approximation neglects diffraction effects in the radiation process, and is conceptually equivalent to the approximation of geometric optics in electromagnetic theory. Using this approximation, we derive equations for the longitudinal impedance for arbitrary offsets, with respect to a reference orbit, of source and test particles. With the help of the Panofsky-Wenzel theorem we also obtain expressions for the transverse impedance (also for arbitrary offsets). We further simplify these expressions for the case of the small offsets that are typical for practical applications. Our final expressions for the impedance, in the general case, involve two dimensional integrals over various cross-sections of the transition. We further demonstrate, for several known axisymmetric examples, how our method is applied to the calculation of impedances. Finally, we discuss the accuracy of the optical approximation and its relation to the diffraction regime in the theory of impedance.
△ Less
Submitted 16 March, 2007;
originally announced March 2007.
-
Emittance Limitation of a Conditioned Beam in a Strong Focusing FEL Undulator
Authors:
Z. Huang,
G. Stupakov,
S. Reiche
Abstract:
Various methods have been proposed to condition an electron beam in order to reduce its emittance effect and to improve the short-wavelength free electron laser (FEL) performance. In this paper, we show that beam conditioning does not result in a complete elimination of the emittance effect in an alternating-gradient focusing FEL undulator. Using a one-dimensional model and a three-dimensional s…
▽ More
Various methods have been proposed to condition an electron beam in order to reduce its emittance effect and to improve the short-wavelength free electron laser (FEL) performance. In this paper, we show that beam conditioning does not result in a complete elimination of the emittance effect in an alternating-gradient focusing FEL undulator. Using a one-dimensional model and a three-dimensional simulation code, we derive a criteria for the emittance limitation of a perfectly conditioned beam that depends on the focusing structure.
△ Less
Submitted 22 March, 2006;
originally announced March 2006.
-
Impact of the Wiggler Coherent Synchrotron Radiation Impedance on the Beam Instability
Authors:
Juhao Wu,
G. V. Stupakov,
T. O. Raubenheimer,
Zhirong Huang
Abstract:
Coherent Synchrotron Radiation (CSR) can play an important role by not only increasing the energy spread and emittance of a beam, but also leading to a potential instability. Previous studies of the CSR induced longitudinal instability were carried out for the CSR impedance due to dipole magnets. However, many storage rings include long wigglers where a large fraction of the synchrotron radiatio…
▽ More
Coherent Synchrotron Radiation (CSR) can play an important role by not only increasing the energy spread and emittance of a beam, but also leading to a potential instability. Previous studies of the CSR induced longitudinal instability were carried out for the CSR impedance due to dipole magnets. However, many storage rings include long wigglers where a large fraction of the synchrotron radiation is emitted. This includes high-luminosity factories such as DAPHNE, PEP-II, KEK-B, and CESR-C as well as the dam** rings of future linear colliders. In this paper, the instability due to the CSR impedance from a wiggler is studied assuming a large wiggler parameter $K$. The primary consideration is a low frequency microwave-like instability, which arises near the pipe cut-off frequency. Detailed results are presented on the growth rate and threshold for the dam** rings of several linear collider designs. Finally, the optimization of the relative fraction of dam** due to the wiggler systems is discussed for the dam** rings.
△ Less
Submitted 24 May, 2003;
originally announced May 2003.
-
Calculation of the Coherent Synchrotron Radiation Impedance from a Wiggler
Authors:
Juhao Wu,
Tor Raubenheimer,
Gennady Stupakov
Abstract:
Most studies of Coherent Synchrotron Radiation (CSR) have only considered the radiation from independent dipole magnets. However, in the dam** rings of future linear colliders, a large fraction of the radiation power will be emitted in dam** wigglers. In this paper, the longitudinal wakefield and impedance due to CSR in a wiggler are derived in the limit of a large wiggler parameter $K$. Aft…
▽ More
Most studies of Coherent Synchrotron Radiation (CSR) have only considered the radiation from independent dipole magnets. However, in the dam** rings of future linear colliders, a large fraction of the radiation power will be emitted in dam** wigglers. In this paper, the longitudinal wakefield and impedance due to CSR in a wiggler are derived in the limit of a large wiggler parameter $K$. After an appropriate scaling, the results can be expressed in terms of universal functions, which are independent of $K$. Analytical asymptotic results are obtained for the wakefield in the limit of large and small distances, and for the impedance in the limit of small and high frequencies.
△ Less
Submitted 29 January, 2003;
originally announced January 2003.
-
Impedance of a Rectangular Beam Tube with Small Corrugations
Authors:
K. L. F. Bane,
G. Stupakov
Abstract:
We consider the impedance of a structure with rectangular, periodic corrugations on two opposing sides of a rectangular beam tube. Using the method of field matching, we find the modes in such a structure. We then limit ourselves to the the case of small corrugations, but where the depth of corrugation is not small compared to the period. For such a structure we generate analytical approximate s…
▽ More
We consider the impedance of a structure with rectangular, periodic corrugations on two opposing sides of a rectangular beam tube. Using the method of field matching, we find the modes in such a structure. We then limit ourselves to the the case of small corrugations, but where the depth of corrugation is not small compared to the period. For such a structure we generate analytical approximate solutions for the wave number $k$, group velocity $v_g$, and loss factor $κ$ for the lowest (the dominant) mode which, when compared with the results of the complete numerical solution, agreed well. We find: if $w\sim a$, where $w$ is the beam pipe width and $a$ is the beam pipe half-height, then one mode dominates the impedance, with $k\sim1/\sqrt{wδ}$ ($δ$ is the depth of corrugation), $(1-v_g/c)\simδ$, and $κ\sim1/(aw)$, which (when replacing $w$ by $a$) is the same scaling as was found for small corrugations in a {\it round} beam pipe. Our results disagree in an important way with a recent paper of Mostacci {\it et al.} [A. Mostacci {\it et al.}, Phys. Rev. ST-AB, {\bf 5}, 044401 (2002)], where, for the rectangular structure, the authors obtained a synchronous mode with the same frequency $k$, but with $κ\simδ$. Finally, we find that if $w$ is large compared to $a$ then many nearby modes contribute to the impedance, resulting in a wakefield that Landau damps.
△ Less
Submitted 10 September, 2002;
originally announced September 2002.
-
Manifold Dam** Of Wakefields In High Phase Advance Linacs For The NLC
Authors:
R. M. Jones,
Z. Li,
R. H. Miller,
T. O. Raubenheimer,
R. D. Ruth,
G. V. Stupakov,
J. W. Wang,
N. M. Kroll
Abstract:
Earlier RDDS (Rounded Damped Detuned Structures) [1,2], designed, fabricated and tested at SLAC, in collaboration with KEK, have been shown to damp wakefields successfully. However, electrical breakdown has been found to occur in these structures and this makes them inoperable at the desired gradient. Recent results [3] indicate that lowering the group velocity of the accelerating mode reduces e…
▽ More
Earlier RDDS (Rounded Damped Detuned Structures) [1,2], designed, fabricated and tested at SLAC, in collaboration with KEK, have been shown to damp wakefields successfully. However, electrical breakdown has been found to occur in these structures and this makes them inoperable at the desired gradient. Recent results [3] indicate that lowering the group velocity of the accelerating mode reduces electrical breakdown events. In order to preserve the filling time of each structure a high synchronous phase advance (150 degrees as opposed to 120 used in previous NLC designs) has been chosen. Here, dam** of the wakefield is analyzed. Manifold dam** and interleaving of structure cell frequencies is discussed. These wakefields impose alignment tolerances on the cells and on the structure as a whole. Tolerance calculations are performed and these are compared with analytic estimations.
△ Less
Submitted 27 June, 2002;
originally announced June 2002.
-
Wake and Impedance
Authors:
G. V. Stupakov
Abstract:
A systematic exposition of the basic concepts of wakes and impedances is given for relativistic beams in accelerators.
A systematic exposition of the basic concepts of wakes and impedances is given for relativistic beams in accelerators.
△ Less
Submitted 3 November, 2000;
originally announced November 2000.
-
Design, fabrication and measurement of the first rounded damped detuned accelerator structure (RDDS1)
Authors:
J. W. Wang,
C. Adolphsen,
G. B. Bowden,
D. L. Burke,
J. Cornuelle,
V. A. Dolgashev,
W. B. Fowkes,
R. K. Jobe,
R. M. Jones,
K. Ko,
N. Kroll,
Z. Li,
R. J. Loewen,
D. McCormick,
R. H. Miller,
C. K. Ng,
C. Pearson,
T. O. Raubenhemer,
R. Reed,
M. Ross,
R. D. Ruth,
T. Smith,
G. Stupakov,
T. Higo,
Y. Funahashi
, et al. (8 additional authors not shown)
Abstract:
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulati…
▽ More
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulation. The fabrication issues covered are ultra-precision cell machining with micron accuracy, assembly and diffusion bonding technologies to satisfactorily meet bookshelf, straightness and cell rotational alignment requirements. The measurements described are the RF properties of single cavities and complete accelerator section, as well as wakefields from the ASSET tests at SLAC. Finally, future improvements are also discussed.
△ Less
Submitted 6 September, 2000;
originally announced September 2000.
-
An Investigation of Optimised Frequency Distributions for Dam** Wakefields in X-Band Linacs for the NLC
Authors:
R. M. Jones,
N. M. Kroll,
R. H. Miller,
T. O. Raubenheimer,
G. V. Stupakov
Abstract:
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam Break Up) or at the very least it will dilute the emittance of the beam. Several Gaussian detuned structures have been designed and tested [1] at SLAC and in…
▽ More
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam Break Up) or at the very least it will dilute the emittance of the beam. Several Gaussian detuned structures have been designed and tested [1] at SLAC and in this paper we explore new distributions with possibly better dam** properties. The progress of the beam through approximately 5,000 structures is monitored in phase space and results on this are presented.
[1] J.W. Wang et al, TUA03, LINAC2000
△ Less
Submitted 30 August, 2000; v1 submitted 20 August, 2000;
originally announced August 2000.
-
Fabrication and Tolerance Issues and their Influence on Multi-Bunch Bbu and Emittance Dilution in the Construction of X-Band RDDS Linacs for the NLC
Authors:
R. M. Jones,
R. H. Miller,
T. O. Raubenheimer,
G. V. Stupakov
Abstract:
The main linacs of the Next Linear Collider (NLC) will contain several thousand X-band RDDS (Rounded Damped Detuned Structures). The transverse wakefield in the structures is reduced by detuning the modal frequencies such that they destructively interfere and by four dam** manifolds per structure which provide weak dam**. Errors in the fabrication of the individual cells and in the alignment…
▽ More
The main linacs of the Next Linear Collider (NLC) will contain several thousand X-band RDDS (Rounded Damped Detuned Structures). The transverse wakefield in the structures is reduced by detuning the modal frequencies such that they destructively interfere and by four dam** manifolds per structure which provide weak dam**. Errors in the fabrication of the individual cells and in the alignment of the cells will reduce the cancellation of the modes. Here, we calculate the tolerances on random errors in the synchronous frequencies of the cells and the cell-to-cell alignment.
△ Less
Submitted 20 August, 2000;
originally announced August 2000.
-
Suppression of beam breakup instability in a long train by introducing energy spread between the bunches
Authors:
G. V. Stupakov
Abstract:
Interaction between the bunches in the NLC main linac via long range wakefields can cause a beam breakup instability. Although the magnitude of the long range wakefields for an ideal NLC structure is below the instability threshold, the wake increases when structure manufacturing errors are taken into account. In case of large errors, the develo** instability can result in the projected emitta…
▽ More
Interaction between the bunches in the NLC main linac via long range wakefields can cause a beam breakup instability. Although the magnitude of the long range wakefields for an ideal NLC structure is below the instability threshold, the wake increases when structure manufacturing errors are taken into account. In case of large errors, the develo** instability can result in the projected emittance dilution of the bunch train. To suppress the instability, we propose to introduce an energy spread between the bunches, similar to the BNS energy spread for dam** of the beam breakup within a single bunch. Based on simple estimates, we show that the energy spread of order of 1-2% should be enough for suppression of the instability. The results of computer simulations with the simulation code LIAR confirm theoretical estimates and indicate that both the tolerances for structure misalignments and the incoming beam jitter can be considerably loosened by introducing the energy spread within the beam.
△ Less
Submitted 3 August, 2000;
originally announced August 2000.
-
Quadrupole Misalignments and Steering in Long Linacs
Authors:
G. V. Stupakov
Abstract:
We present a study of orbit jitter and emittance growth in a long linac caused by misalignment of quadrupoles. First, assuming a FODO lattice, we derive analytical formulae for the RMS deviation of the orbit and the emittance growth caused by random uncorrelated misalignments of all quadrupoles. We then consider an alignment algorithm based on minimization of BPM readings with a given BPM resolu…
▽ More
We present a study of orbit jitter and emittance growth in a long linac caused by misalignment of quadrupoles. First, assuming a FODO lattice, we derive analytical formulae for the RMS deviation of the orbit and the emittance growth caused by random uncorrelated misalignments of all quadrupoles. We then consider an alignment algorithm based on minimization of BPM readings with a given BPM resolution and finite mover steps.
△ Less
Submitted 3 August, 2000;
originally announced August 2000.
-
A bounded source cannot emit a unipolar electromagnetic wave
Authors:
Kwang-Je Kim,
Kirk T. McDonald,
Gennady V. Stupakov,
Max S. Zolotorev
Abstract:
We show that a bounded source cannot produce a unipolar electromagnetic pulse. As a consequence, there are no three-dimensional electromagnetic solitons in vacuum.
We show that a bounded source cannot produce a unipolar electromagnetic pulse. As a consequence, there are no three-dimensional electromagnetic solitons in vacuum.
△ Less
Submitted 31 March, 2000; v1 submitted 23 March, 2000;
originally announced March 2000.
-
Trapped Modes in the Vacuum Chamber of an Arbitrary Cross Section
Authors:
Sergey S. Kurennoy,
Gennady V. Stupakov
Abstract:
It has been shown that a small discontinuity such as an enlargement or a hole on circular waveguides can produce trapped electromagnetic modes with frequencies slightly below the waveguide cutoff. The trapped modes due to multiple discontinuities can lead to high narrow-band contributions to the beam-chamber coupling impedance, especially when the wall conductivity is high enough. To make more r…
▽ More
It has been shown that a small discontinuity such as an enlargement or a hole on circular waveguides can produce trapped electromagnetic modes with frequencies slightly below the waveguide cutoff. The trapped modes due to multiple discontinuities can lead to high narrow-band contributions to the beam-chamber coupling impedance, especially when the wall conductivity is high enough. To make more reliable estimates of these contributions for real machines, an analytical theory of the trapped modes is developed in this paper for a general case of the vacuum chamber with an arbitrary single-connected cross section. The resonant frequencies and coupling impedances due to trapped modes are calculated, and simple explicit expressions are given for circular and rectangular cross sections. The estimates for the LHC are presented.
△ Less
Submitted 27 April, 1995;
originally announced April 1995.
-
A General Approach for Calculating Coupling Impedances of Small Discontinuities
Authors:
Sergey S. Kurennoy,
Robert L. Gluckstern,
Gennady V. Stupakov
Abstract:
A general theory of the beam interaction with small discontinuities of the vacuum chamber is developed taking into account the reaction of radiated waves back on the discontinuity. The reactive impedance calculated earlier is reproduced as the first order, and the resistive one as the second order of a perturbation theory based on this general approach. The theory also gives, in a very natural w…
▽ More
A general theory of the beam interaction with small discontinuities of the vacuum chamber is developed taking into account the reaction of radiated waves back on the discontinuity. The reactive impedance calculated earlier is reproduced as the first order, and the resistive one as the second order of a perturbation theory based on this general approach. The theory also gives, in a very natural way, the results for the trapped modes due to small discontinuities obtained earlier by a different method.
△ Less
Submitted 27 April, 1995;
originally announced April 1995.