-
A computational materials science paradigm for a Course-based Undergraduate Research Experience (CURE)
Authors:
David A. Strubbe
Abstract:
Course-based Undergraduate Research Experiences (CUREs) bring the excitement of research into the classroom to improve learning and the sense of belonging in the field. They can reach more students, earlier in their studies, than typical undergraduate research. Key aspects are: students learn and use research methods, give input into the project, generate new research data, and analyze it to draw…
▽ More
Course-based Undergraduate Research Experiences (CUREs) bring the excitement of research into the classroom to improve learning and the sense of belonging in the field. They can reach more students, earlier in their studies, than typical undergraduate research. Key aspects are: students learn and use research methods, give input into the project, generate new research data, and analyze it to draw conclusions that are not known beforehand. CUREs are common in other fields but have been rare in materials science and engineering. I propose a paradigm for computational material science CUREs, enabled by web-based simulation tools from nanoHUB.org that require minimal computational skills. After preparatory exercises, students each calculate part of a set of closely related materials, following a defined protocol to contribute to a novel class dataset which they analyze, and also calculate an additional property of their choice. This approach has been used successfully in several class projects.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Implementation of time-dependent Hartree Fock in real space
Authors:
Uday Panta,
David A. Strubbe
Abstract:
Time-dependent Hartree-Fock (TDHF) is one of the fundamental post-Hartree-Fock (HF) methods to describe excited states. In its Tamm-Dancoff form, equivalent to Configuration Interaction Singles, it is still widely used and particularly applicable to big molecules where more accurate methods may be unfeasibly expensive. However, it is rarely implemented in real space, mostly because of the expensiv…
▽ More
Time-dependent Hartree-Fock (TDHF) is one of the fundamental post-Hartree-Fock (HF) methods to describe excited states. In its Tamm-Dancoff form, equivalent to Configuration Interaction Singles, it is still widely used and particularly applicable to big molecules where more accurate methods may be unfeasibly expensive. However, it is rarely implemented in real space, mostly because of the expensive nature of the exact-exchange potential in real space. Compared to widely used Gaussian-type orbitals (GTO) basis sets, real space often offers easier implementation of equations and more systematic convergence of Rydberg states, as well as favorable scaling, effective domain parallelization, flexible boundary conditions, and ability to treat model systems. We implemented TDHF in the Octopus real-space code as a step toward linear-response hybrid time-dependent density-functional theory (TDDFT), other post-HF methods, and ensemble density-functional theory methods involving exact exchange. Calculation of HF's non-local exact exchange is very expensive in real space. We overcome this limitation with Octopus' implementation of Adaptively Compressed Exchange (ACE), and find the appropriate mixing and starting point to complete the ground-state calculation in a practical amount of time, to enable TDHF. We compared our results to those from GTOs on a set of small molecules and confirmed close agreement of results, though with larger deviations than in the case of semi-local TDDFT. We find that convergence of TDHF demands a finer real-space grid than semi-local TDDFT. We also present the subtleties in benchmarking a real-space calculation against GTOs, relating to Rydberg and vacuum states.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Low-energy nine-layer rhombohedral stacking of transition metal dichalcogenides
Authors:
Rijan Karkee,
David A. Strubbe
Abstract:
Transition-metal dichalcogenides (TMDs) show unique physical, optical, and electronic properties. The known phases of TMDs are 2H and 3R in bulk form, 1T and associated reconstructions, and 1H in monolayer form. This paper reports a hypothetical phase, 9R, that may exist in TMDs (Mo, W)(S, Se, Te)$_2$, meeting both dynamical stability and elastic stability criteria. 9R phase has the same space gro…
▽ More
Transition-metal dichalcogenides (TMDs) show unique physical, optical, and electronic properties. The known phases of TMDs are 2H and 3R in bulk form, 1T and associated reconstructions, and 1H in monolayer form. This paper reports a hypothetical phase, 9R, that may exist in TMDs (Mo, W)(S, Se, Te)$_2$, meeting both dynamical stability and elastic stability criteria. 9R phase has the same space group as 3R, $i.e.$ rhombohedral $R3m$ without inversion symmetry, and has 9 layers in a conventional unit cell. We find that 9R has an energy within 1 meV per formula unit of 3R and can be energetically favored by a particular strain condition. We further calculate the electronic, elastic, piezoelectric, Raman, and second-harmonic generation signatures of 9R TMDs and compare them with the corresponding 2H and 3R phases. 9R has similar properties to 3R but shows distinctive Raman peaks in the low-frequency regime, improved piezoelectric properties, and unique band splitting arising from layer coupling at the conduction band minimum. These distinct properties make 9R an attractive candidate for applications in piezotronics and valleytronics.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Approaching Periodic Systems in Ensemble Density Functional Theory via Finite One-Dimensional Models
Authors:
Remi J. Leano,
Aurora Pribram-Jones,
David A. Strubbe
Abstract:
Ensemble Density Functional Theory (EDFT) is a generalization of ground-state Density Functional Theory (GS DFT), which is based on an exact formal theory of finite collections of a system's ground and excited states. EDFT in various forms has been shown to improve the accuracy of calculated energy level differences in isolated model systems, atoms, and molecules, but it is not yet clear how EDFT…
▽ More
Ensemble Density Functional Theory (EDFT) is a generalization of ground-state Density Functional Theory (GS DFT), which is based on an exact formal theory of finite collections of a system's ground and excited states. EDFT in various forms has been shown to improve the accuracy of calculated energy level differences in isolated model systems, atoms, and molecules, but it is not yet clear how EDFT could be used to calculate band gaps for periodic systems. We extend the application of EDFT toward periodic systems by estimating the thermodynamic limit with increasingly large finite one-dimensional ``particle in a box'' systems, which approach the uniform electron gas (UEG). Using ensemble-generalized Hartree and Local Spin Density Approximation (LSDA) exchange-correlation functionals, we find that corrections go to zero in the infinite limit, as expected for a metallic system. However, there is a correction to the effective mass, with results comparable to other calculations on 1D, 2D, and 3D UEGs, which indicates promise for non-trivial results from EDFT on periodic systems.
△ Less
Submitted 12 June, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Computation of the expectation value of the spin operator $\hat{S}^2$ for the Spin-Flip Bethe-Salpeter Equation
Authors:
Bradford A. Barker,
Arabi Seshappan,
David A. Strubbe
Abstract:
Spin-flip methods applied to excited-state approaches like the Bethe-Salpeter Equation allow access to the excitation energies of open-shell systems, such as molecules and defects in solids. The eigenstates of these solutions, however, are generally not eigenstates of the spin operator $\hat{S}^2$. Even for simple cases where the excitation vector is expected to be, for example, a triplet state, t…
▽ More
Spin-flip methods applied to excited-state approaches like the Bethe-Salpeter Equation allow access to the excitation energies of open-shell systems, such as molecules and defects in solids. The eigenstates of these solutions, however, are generally not eigenstates of the spin operator $\hat{S}^2$. Even for simple cases where the excitation vector is expected to be, for example, a triplet state, the value of $\langle \hat{S}^2 \rangle$ may be found to differ from 2.00; this difference is called ``spin contamination.'' The expectation values $\langle \hat{S}^2 \rangle$ must be computed for each excitation vector, to assist with the characterization of the particular excitation and to determine the amount of spin contamination of the state. Our aim is to provide for the first time in the spin-flip methods literature a comprehensive resource on the derivation of the formulas for $\langle \hat{S}^2 \rangle$ as well as its computational implementation. After a brief discussion of the theory of the Spin-Flip Bethe-Salpeter Equation and some examples further illustrating the need for calculating $\langle \hat{S}^2 \rangle$, we present the derivation for the general equation for computing $\langle \hat{S}^2 \rangle$ with the eigenvectors from an SF-BSE calculation, how it is implemented in a Python script, and timing information on how this calculation scales with the size of the SF-BSE Hamiltonian.
△ Less
Submitted 12 June, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Energy Gap from Step Structure of the Analytically Inverted Non-Additive Kinetic Potential
Authors:
Mojdeh Banafsheh,
David A. Strubbe
Abstract:
The bandgap constitutes a challenging problem in density functional theory (DFT) methodologies. It is known that the energy gap values calculated by common DFT approaches are underestimated. The bandgap was also found to be related to the derivative discontinuity (DD) of the exchange-correlation potential in the Kohn-Sham formulation of DFT. Several reports have shown that DD appears as a step on…
▽ More
The bandgap constitutes a challenging problem in density functional theory (DFT) methodologies. It is known that the energy gap values calculated by common DFT approaches are underestimated. The bandgap was also found to be related to the derivative discontinuity (DD) of the exchange-correlation potential in the Kohn-Sham formulation of DFT. Several reports have shown that DD appears as a step on the potential curve. The step structure is a mandatory structure for aligning the KS energy levels in the ionization potentials in a dissociated molecule in both fragments and is a function of electron localisation. Reproducing the step in the DFT framework gives the charge transfer process and the correct energy gap and describes the source of dissociation. This step phenomenon has not yet been studied in the non-additive kinetic potential $v^{\text{NAD}}[ρ_A,ρ_B](\textbf{r})$, a key quantity used in embedding theories. While $v^{\text{NAD}}[ρ_A,ρ_B](\textbf{r})$ is known to be difficult to approximate, in this work, we explain how an accurate energy gap can be produced from the analytically inverted $v^{\text{NAD}}[ρ_A,ρ_B](\textbf{r})$, even if we use the input densities calculated by the local and semi-local functionals. We used the precisely calculated $v^{\text{NAD}}[ρ_A,ρ_B](\textbf{r})$ reported in our previous publication [Phys. Rev. A 106, 042812 (2022)] to produce the energy gap for some model systems and report in this work the promising accuracy of our results through the comparison with the results obtained from one of the most accurate calculations, OEP theory with the KLI local approximation.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
A substitutional quantum defect in WS$_2$ discovered by high-throughput computational screening and fabricated by site-selective STM manipulation
Authors:
John C. Thomas,
Wei Chen,
Yihuang Xiong,
Bradford A. Barker,
Junze Zhou,
Weiru Chen,
Antonio Rossi,
Nolan Kelly,
Zhuohang Yu,
Da Zhou,
Shalini Kumari,
Edward S. Barnard,
Joshua A. Robinson,
Mauricio Terrones,
Adam Schwartzberg,
D. Frank Ogletree,
Eli Rotenberg,
Marcus M. Noack,
Sinéad Griffin,
Archana Raja,
David A. Strubbe,
Gian-Marco Rignanese,
Alexander Weber-Bargioni,
Geoffroy Hautier
Abstract:
Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS$_2$, which present localized levels in…
▽ More
Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS$_2$, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur (Co$_{\rm S}^{0}$) as very promising and fabricate it with scanning tunneling microscopy (STM). The Co$_{\rm S}^{0}$ electronic structure measured by STM agrees with first principles and showcases an attractive new quantum defect. Our work shows how HT computational screening and novel defect synthesis routes can be combined to design new quantum defects.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Pausing ultrafast melting by multiple femtosecond-laser pulses
Authors:
Tobias Zier,
Eeuwe S. Zijlstra,
Martin E. Garcia,
David A. Strubbe
Abstract:
An intense femtosecond-laser excitation of a solid induces highly nonthermal conditions. In materials like silicon, laser-induced bond-softening leads to a highly incoherent ionic motion and eventually nonthermal melting. But is this outcome an inevitable consequence, or can it be controlled? Here, we performed ab initio molecular dynamics simulations of crystalline silicon after multiple femtosec…
▽ More
An intense femtosecond-laser excitation of a solid induces highly nonthermal conditions. In materials like silicon, laser-induced bond-softening leads to a highly incoherent ionic motion and eventually nonthermal melting. But is this outcome an inevitable consequence, or can it be controlled? Here, we performed ab initio molecular dynamics simulations of crystalline silicon after multiple femtosecond-laser pulse excitations with total energy above the nonthermal melting threshold. Our results demonstrate an excitation mechanism, which can be generalized to other materials, that pauses nonthermal melting and creates a metastable state instead, which has an electronic structure similar to the ground state. Our findings open the way for a search for metastable structural and/or electronic transitions in the high-excitation regime. In addition, our approach could be used to switch off nonthermal contributions in experiments, which could be used to obtain reliable electron-phonon coupling constants more easily.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
Development and Application of a ReaxFF Reactive Force Field for Ni-Doped MoS$_2$
Authors:
Karen Mohammadtabar,
Enrique Guerrero,
Sergio Romero Garcia,
Yun Kyung Shin,
Adri C. T. van Duin,
David A. Strubbe,
Ashlie Martini
Abstract:
The properties of $\mathrm{MoS_2}$ can be tuned or optimized through do**. In particular, Ni do** has been shown to improve the performance of $\mathrm{MoS_2}$ for various applications, including catalysis and tribology. To enable investigation of Ni-doped $\mathrm{MoS_2}$ with reactive molecular dynamics simulations, we developed a new ReaxFF force field to describe this material. The force f…
▽ More
The properties of $\mathrm{MoS_2}$ can be tuned or optimized through do**. In particular, Ni do** has been shown to improve the performance of $\mathrm{MoS_2}$ for various applications, including catalysis and tribology. To enable investigation of Ni-doped $\mathrm{MoS_2}$ with reactive molecular dynamics simulations, we developed a new ReaxFF force field to describe this material. The force field parameters were optimized to match a large set of density-functional theory (DFT) calculations of 2H-$\mathrm{MoS_2}$ doped with Ni, at four different sites (Mo-substituted, S-substituted, octahedral intercalation, and tetrahedral intercalation), under uniaxial, biaxial, triaxial, and shear strain. The force field was evaluated by comparing ReaxFF- and DFT-relaxed structural parameters, the tetrahedral/octahedral energy difference in doped 2H, energies of doped 1H and 1T monolayers, and doped 2H structures with vacancies. We demonstrated the application of the force field with reactive simulations of sputtering deposition and annealing of Ni-doped $\mathrm{MoS_2}$ films. Results show that the developed force field can successfully model the phase transition of Ni-doped $\mathrm{MoS_2}$ from amorphous to crystalline. The newly developed force field can be used in subsequent investigations to study the properties and behavior of Ni-doped $\mathrm{MoS_2}$ using reactive molecular dynamics simulations.
△ Less
Submitted 12 June, 2024; v1 submitted 2 February, 2023;
originally announced February 2023.
-
Quantifying Hidden Symmetry in the Tetragonal CH$_3$NH$_3$PbI$_3$ Perovskite
Authors:
Kuntal Talit,
David A. Strubbe
Abstract:
The assignment of an exact space group to the tetragonal CH$_3$NH$_3$PbI$_3$ perovskite structure is experimentally challenging and controversial in the literature. Average orientation of the methylammonium ion that gives symmetry to the experimental measurement is not captured in a static density functional theory calculation, although the quasi-I4cm and quasi-I4/mcm structures are commonly used…
▽ More
The assignment of an exact space group to the tetragonal CH$_3$NH$_3$PbI$_3$ perovskite structure is experimentally challenging and controversial in the literature. Average orientation of the methylammonium ion that gives symmetry to the experimental measurement is not captured in a static density functional theory calculation, although the quasi-I4cm and quasi-I4/mcm structures are commonly used in calculations. In this work we have developed a methodology to quantify the hidden symmetry of these structures using group theory, to enable use of symmetries in understanding spectroscopy and other properties. We study the approximate symmetry of vibrational modes, including analysis of degenerate representations, as well as the dielectric, elastic, electro-optic, Born effective charge, and Raman tensors and the dynamical matrix. Comparing to each subgroup of the full tetragonal D$_{4h}$, our results show that the quasi-I4cm is best described by the expected corresponding point group C$_{4v}$, whereas the quasi-I4/mcm (despite corresponding to point group D$_{4h}$) is best described by the lower symmetry C$_{2v}$. Our methodology can be useful generally for analysis of other soft hybrid materials or any approximately symmetric material.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Surface Effects on Anisotropic Photoluminescence in One-Dimensional Organic Metal Halide Hybrids
Authors:
Luke M. McClintock,
Long Yuan,
Ziyi Song,
Michael T. Pettes,
Dmitry Yarotski,
Rijan Karkee,
David A. Strubbe,
Liang Z. Tan,
Azza Ben-Akacha,
Biwu Ma,
Yunshu Shi,
Valentin Taufour,
Dong Yu
Abstract:
One-dimensional (1D) organic metal halide hybrids exhibit strongly anisotropic optical properties, highly efficient light emission, and large Stokes shift, holding promises for novel photodetection and lighting applications. However, the fundamental mechanisms governing their unique optical properties and in particular the impacts of surface effects are not understood. Here, we investigate 1D C4N2…
▽ More
One-dimensional (1D) organic metal halide hybrids exhibit strongly anisotropic optical properties, highly efficient light emission, and large Stokes shift, holding promises for novel photodetection and lighting applications. However, the fundamental mechanisms governing their unique optical properties and in particular the impacts of surface effects are not understood. Here, we investigate 1D C4N2H14PbBr4 by polarization-dependent time-averaged and time-resolved photoluminescence (TRPL) spectroscopy, as a function of photoexcitation energy. Surprisingly, we find that the emission under photoexcitation polarized parallel to the 1D metal halide chains can be either stronger or weaker than that under perpendicular polarization, depending on the excitation energy. We attribute the excitation-energy-dependent anisotropic emission to fast surface recombination, supported by first-principles calculations of optical absorption in this material. The fast surface recombination is directly confirmed by TRPL measurements, when the excitation is polarized parallel to the chains. Our comprehensive studies provide a more complete picture for a deeper understanding of the optical anisotropy in 1D organic metal halide hybrids.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Bulk Assembly of Organic Metal Halide Nanoribbons
Authors:
Su** Lee,
Rijan Karkee,
Azza Ben-Akacha,
Derek Luong,
J. S. Raaj Vellore Winfred,
Xinsong Lin,
David A. Strubbe,
Biwu Ma
Abstract:
Organic metal halide hybrids with low-dimensional structures at the molecular level have received great attention recently for their exceptional structural tunability and unique photophysical properties. Here we report for the first time the synthesis and characterization of a one-dimensional (1D) organic metal halide hybrid material, which contains metal halide nanoribbons with a width of three o…
▽ More
Organic metal halide hybrids with low-dimensional structures at the molecular level have received great attention recently for their exceptional structural tunability and unique photophysical properties. Here we report for the first time the synthesis and characterization of a one-dimensional (1D) organic metal halide hybrid material, which contains metal halide nanoribbons with a width of three octahedral units. It is found that this material with a chemical formula C$_8$H$_{28}$N$_5$Pb$_3$Cl$_{11}$ shows a dual emission with a photoluminescence quantum efficiency (PLQE) of around 25% under ultraviolet (UV) light irradiation. Photophysical studies and density functional theory (DFT) calculations suggest the coexisting of delocalized free excitons and localized self-trapped excitons in metal halide nanoribbons leading to the dual emission. This work shows once again the exceptional tunability of organic metal halide hybrids that bridge between molecular systems with localized states and crystalline ones with electronic bands.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Atomistic Mechanisms of Sliding in Few-Layer and Bulk Doped MoS$_2$
Authors:
Enrique Guerrero,
David A. Strubbe
Abstract:
Sliding of two-dimensional materials is critical for their application as solid lubricants for space, and also relevant for strain engineering and device fabrication. Dopants such as Ni surprisingly improve lubrication in MoS$_2$, despite formation of interlayer bonds by intercalated Ni, and the mechanism has remained unclear. While sliding on the atomistic level has been theoretically investigate…
▽ More
Sliding of two-dimensional materials is critical for their application as solid lubricants for space, and also relevant for strain engineering and device fabrication. Dopants such as Ni surprisingly improve lubrication in MoS$_2$, despite formation of interlayer bonds by intercalated Ni, and the mechanism has remained unclear. While sliding on the atomistic level has been theoretically investigated in pristine 2D materials, there has been little work on doped forms, especially for the complicated case of intercalation. We use density functional theory to study sliding of Ni-doped MoS$_2$, considering Mo/S substitution and octahedral/tetrahedral intercalation. We find that bulk and trilayers are well described by pairwise bilayer interactions. Tetrahedral intercalation between layers dramatically increases their sliding barrier, but minimally affects sliding between adjacent undoped layers, thus preserving effective lubrication. We provide an atomistic view of how sliding occurs in doped transition-metal dichalcogenides, and a general methodology to analyze doped sliding.
△ Less
Submitted 30 September, 2022;
originally announced September 2022.
-
Spin-flip Bethe-Salpeter equation approach for ground and excited states of open-shell molecules and defects in solids
Authors:
Bradford A. Barker,
David A. Strubbe
Abstract:
Open-shell systems such as magnetic molecules or defects with a triplet ground state are challenging to describe in electronic structure methods, but are of great interest for quantum information applications. We demonstrate a spin-flip approach within the Bethe-Salpeter equation to calculate ground and excited states of open-shell molecules and defected solids. The approach works in periodic boun…
▽ More
Open-shell systems such as magnetic molecules or defects with a triplet ground state are challenging to describe in electronic structure methods, but are of great interest for quantum information applications. We demonstrate a spin-flip approach within the Bethe-Salpeter equation to calculate ground and excited states of open-shell molecules and defected solids. The approach works in periodic boundary conditions without any need for embedding or selection of a subspace. Our benchmark results for the torsion potential-energy surface of ethylene and the optical excitations of the diamond NV$^{-}$ center show excellent agreement with the literature, and a low or moderate level of spin contamination.
△ Less
Submitted 10 July, 2022;
originally announced July 2022.
-
Nuclear cusps and singularities in the non-additive kinetic potential bi-functional from analytical inversion
Authors:
Mojdeh Banafsheh,
Tomasz A. Wesolowski,
Tim Gould,
Leeor Kronik,
David A. Strubbe
Abstract:
The non-additive kinetic potential $v^{\text{NAD}}$ is a key quantity in density-functional theory (DFT) embedding methods, such as frozen density embedding theory and partition DFT. $v^{\text{NAD}}$ is a bi-functional of electron densities $ρ_{\rm B}$ and $ρ_{\rm tot} = ρ_{\rm A} + ρ_{\rm B}$. It can be evaluated using approximate kinetic-energy functionals, but accurate approximations are challe…
▽ More
The non-additive kinetic potential $v^{\text{NAD}}$ is a key quantity in density-functional theory (DFT) embedding methods, such as frozen density embedding theory and partition DFT. $v^{\text{NAD}}$ is a bi-functional of electron densities $ρ_{\rm B}$ and $ρ_{\rm tot} = ρ_{\rm A} + ρ_{\rm B}$. It can be evaluated using approximate kinetic-energy functionals, but accurate approximations are challenging. The behavior of $v^{\text{NAD}}$ in the vicinity of the nuclei has long been questioned, and singularities were seen in some approximate calculations. In this article, the existence of singularities in $v^{\text{NAD}}$ is analyzed analytically for various choices of $ρ_{\rm B}$ and $ρ_{\rm tot}$, using the nuclear cusp conditions for the density and Kohn-Sham potential. It is shown that no singularities arise from smoothly partitioned ground-state Kohn-Sham densities. We confirm this result by numerical calculations on diatomic test systems HeHe, HeLi$^+$, and H$_2$, using analytical inversion to obtain a numerically exact $v^{\rm NAD}$ for the local density approximation. We examine features of $v^{\rm NAD}$ which can be used for development and testing of approximations to $v^{\rm NAD}[ρ_{\rm B},ρ_{\rm tot}]$ and kinetic-energy functionals.
△ Less
Submitted 10 October, 2022; v1 submitted 8 July, 2022;
originally announced July 2022.
-
Fully relativistic $GW$/Bethe-Salpeter calculations in BerkeleyGW: implementation, symmetries, benchmarking, and performance
Authors:
Bradford A. Barker,
Jack Deslippe,
Johannes Lischner,
Manish Jain,
Oleg V. Yazyev,
David A. Strubbe,
Steven G. Louie,
.
Abstract:
Computing the $GW$ quasiparticle bandstructure and Bethe-Salpeter Equation (BSE) absorption spectra for materials with spin-orbit coupling has commonly been done by treating $GW$ corrections and spin-orbit coupling as separate perturbations to density-functional theory. However, accurate treatment of materials with strong spin-orbit coupling often requires a fully relativistic approach using spino…
▽ More
Computing the $GW$ quasiparticle bandstructure and Bethe-Salpeter Equation (BSE) absorption spectra for materials with spin-orbit coupling has commonly been done by treating $GW$ corrections and spin-orbit coupling as separate perturbations to density-functional theory. However, accurate treatment of materials with strong spin-orbit coupling often requires a fully relativistic approach using spinor wavefunctions in the Kohn-Sham equation and $GW$/BSE. Such calculations have only recently become available, in particular for the BSE. We have implemented this approach in the plane-wave pseudopotential $GW$/BSE code BerkeleyGW, which is highly parallelized and widely used in the electronic-structure community. We present reference results for quasiparticle bandstructures and optical absorption spectra of solids with different strengths of spin-orbit coupling, including Si, Ge, GaAs, GaSb, CdSe, Au, and Bi$_2$Se$_3$. The calculated quasiparticle band gaps of these systems are found to agree with experiment to within a few tens of meV. The absorption spectrum of GaSb calculated with the fully-relativistic $GW$-BSE captures the large spin-orbit splitting of peaks in the spectrum. For Bi$_2$Se$_3$, we find a drastic change in the low-energy bandstructure compared to that of DFT, with the fully-relativistic treatment of the $GW$ approximation correctly capturing the parabolic nature of the valence and conduction bands after including off-diagonal self-energy matrix elements. We present the detailed methodology, approach to spatial symmetries for spinors, comparison against other codes, and performance compared to spinless $GW$/BSE calculations and perturbative approaches to SOC. This work aims to spur further development of spinor $GW$/BSE methodology in excited-state research software.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Structure, Thermodynamics, and Raman Spectroscopy of Rhenium-Doped Bulk MoS$_2$ from First Principles
Authors:
Enrique Guerrero,
David A. Strubbe
Abstract:
Do** MoS$_2$ with Re is known to alter the electronic, structural, and tribological properties. Re-doped MoS$_2$ has been previously mainly studied in monolayer or few-layer form, but can also be relevant for applications in many-layer or bulk form. In this work, we use density functional theory to explore the structure, phase stability, and Raman spectrum of bulk Re-doped MoS$_2$. We consider t…
▽ More
Do** MoS$_2$ with Re is known to alter the electronic, structural, and tribological properties. Re-doped MoS$_2$ has been previously mainly studied in monolayer or few-layer form, but can also be relevant for applications in many-layer or bulk form. In this work, we use density functional theory to explore the structure, phase stability, and Raman spectrum of bulk Re-doped MoS$_2$. We consider the possibility of the Re dopant existing at different locations and provide experimentally distinguishable characteristics of the most likely sites: Mo-substitution and tetrahedral (t-) intercalation. We demonstrate and benchmark a general approach to calculate Raman spectra of doped materials with metallic densities of states by using atomic Raman tensors from the pristine material. Applying this method to the metallic Re-doped structures, we find characteristic shifts in the Raman-active peaks depending on Re dopant position: redshifts in both A$_{\rm 1g}$ and E$_{\rm 2g}^1$ peaks in the t-intercalated case versus a redshift for A$_{\rm 1g}$ and blueshift (sometimes accompanied by a smaller redshifted peak) for E$_{\rm 2g}^1$ peaks in the Mo-substituted case, which can be used to identify the dopant sites in experimental samples. We analyze the interactions giving rise to these shifts.
△ Less
Submitted 1 October, 2022; v1 submitted 25 February, 2022;
originally announced February 2022.
-
Panoply of Ni-Do**-Induced Reconstructions, Electronic Phases, and Ferroelectricity in 1T-MoS$_2$
Authors:
Rijan Karkee,
David A. Strubbe
Abstract:
The distorted phases of monolayer 1T-MoS$_2$ have distinct electronic properties, with potential applications in optoelectronics, catalysis, and batteries. We theoretically investigate the use of Ni-do** to generate distorted 1T phases, and find not only the ones usually reported but also two further phases (${3} \times {3}$ and ${4} \times {4}$), depending on the concentration and the substitut…
▽ More
The distorted phases of monolayer 1T-MoS$_2$ have distinct electronic properties, with potential applications in optoelectronics, catalysis, and batteries. We theoretically investigate the use of Ni-do** to generate distorted 1T phases, and find not only the ones usually reported but also two further phases (${3} \times {3}$ and ${4} \times {4}$), depending on the concentration and the substitutional or adatom do** site. Corresponding pristine phases are stable after dopant removal, which might offer a potential route to experimental synthesis. We find large ferroelectric polarizations, most notably in ${3} \times {3}$ which -- compared to the recently measured 1T$''$ -- has 100 times greater ferroelectric polarization, a lower energy, and a larger bandgap. Doped phases include exotic multiferroic semimetals, ferromagnetic polar metals, and improper ferroelectrics with only in-plane polarization switchable. The pristine phases have unusual multiple gaps in the conduction bands, with possible applications for intermediate band solar cells, transparent conductors, and nonlinear optics.
△ Less
Submitted 12 June, 2024; v1 submitted 15 July, 2021;
originally announced July 2021.
-
Phase Stability and Raman/IR Signatures of Ni-Doped MoS$_2$ from Density-Functional Theory Studies
Authors:
Enrique Guerrero,
Rijan Karkee,
David A. Strubbe
Abstract:
Ni-doped MoS$_2$ is a layered material with useful tribological, optoelectronic, and catalytic properties. Experiment and theory on doped MoS$_2$ has focused mostly on monolayers or finite particles: theoretical studies of bulk Ni-doped MoS$_2$ are lacking and the mechanisms by which Ni alters bulk properties are largely unsettled. We use density functional theory calculations to determine the str…
▽ More
Ni-doped MoS$_2$ is a layered material with useful tribological, optoelectronic, and catalytic properties. Experiment and theory on doped MoS$_2$ has focused mostly on monolayers or finite particles: theoretical studies of bulk Ni-doped MoS$_2$ are lacking and the mechanisms by which Ni alters bulk properties are largely unsettled. We use density functional theory calculations to determine the structure, mechanical properties, electronic properties, and formation energies of bulk Ni-doped 2H-MoS$_2$ as a function of do** concentration. We find four meta-stable structures: Mo or S substitution, and tetrahedral (t-) or octahedral (o-) intercalation. We compute phase diagrams as a function of chemical potential to guide experimental synthesis. A convex hull analysis shows that t-intercalation (favored over o-intercalation) is quite stable against phase segregation and in comparison with other compounds containing Ni, Mo, and S; the do** formation energy is around 0.1 meV/atom. Intercalation forms strong interlayer covalent bonds and does not increase the $c$-parameter. Ni-do** creates new states in the electronic density of states in MoS$_2$ and shifts the Fermi level, which are of interest for tuning the electronic and optical properties. We calculate the infrared and Raman spectra and find new peaks and shifts in existing peaks that are unique to each dopant site, and therefore may be used to identify the site experimentally, which has been a challenge to do conclusively.
△ Less
Submitted 28 February, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
Enhanced interlayer interactions in Ni-doped MoS$_2$, and structural and electronic signatures of do** site
Authors:
Rijan Karkee,
Enrique Guerrero,
David A. Strubbe
Abstract:
The crystal structure of MoS$_2$ with strong covalent bonds in plane and weak Van der Waals interactions out of plane gives rise to interesting properties for applications such as solid lubrication, optoelectronics, and catalysis, which can be enhanced by transition-metal do**. However, the mechanisms for improvement and even the structure of the doped material can be unclear, which we address w…
▽ More
The crystal structure of MoS$_2$ with strong covalent bonds in plane and weak Van der Waals interactions out of plane gives rise to interesting properties for applications such as solid lubrication, optoelectronics, and catalysis, which can be enhanced by transition-metal do**. However, the mechanisms for improvement and even the structure of the doped material can be unclear, which we address with theoretical calculations. Building on our previous work on Ni-do** of the bulk 2H phase, now we compare to polytypes (1H monolayer and 3R bulk), to determine favorable sites for Ni and the do** effect on structure, electronic properties, and the layer dissociation energy. The most favorable intercalation/adatom sites are tetrahedral intercalation for 3R (like 2H) and Mo-atop for 1H. The relative energies indicate a possibility of phase change from 2H to 3R with substitution of Mo or S. We find structural and electronic properties that can be used to identify the do** sites, including metallic behavior in Mo-substituted 3R and 2H, and in-gap states for Mo- and S-substituted 1H, which could have interesting optoelectronic applications. We observe a large enhancement in the interlayer interactions of Ni-doped MoS$_2$, opposite to the effect of other transition metals. For lubrication applications, this increased layer dissociation energy could be the mechanism of low wear. Our systematic study shows the effect of do** concentration and we extrapolate to the low-do** limit. This work gives insight into the previously unclear structure of Ni-doped MoS$_2$ and how it can be detected experimentally, the relation of energy and structures of doped monolayers and bulk systems, the electronic properties under do**, and the effect of do** on interlayer interactions.
△ Less
Submitted 30 June, 2021; v1 submitted 10 August, 2020;
originally announced August 2020.
-
Intercalation Leads to Inverse Layer Dependence of Friction on Chemically Doped MoS_{2}
Authors:
Ogulcan Acikgoz,
Enrique Guerrero,
Alper Yanilmaz,
Omur E. Dagdeviren,
Cem Çelebi,
David A. Strubbe,
Mehmet Z. Baykara
Abstract:
We present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e., inverse dependence on the number of layers. Raman spectroscopy measurements combined with a…
▽ More
We present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e., inverse dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.
△ Less
Submitted 28 February, 2022; v1 submitted 11 July, 2020;
originally announced July 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Octopus, a computational framework for exploring light-driven phenomena and quantum dynamics in extended and finite systems
Authors:
Nicolas Tancogne-Dejean,
Micael J. T. Oliveira,
Xavier Andrade,
Heiko Appel,
Carlos H. Borca,
Guillaume Le Breton,
Florian Buchholz,
Alberto Castro,
Stefano Corni,
Alfredo A. Correa,
Umberto De Giovannini,
Alain Delgado,
Florian G. Eich,
Johannes Flick,
Gabriel Gil,
Adrián Gomez,
Nicole Helbig,
Hannes Hübener,
René Jestädt,
Joaquim Jornet-Somoza,
Ask H. Larsen,
Irina V. Lebedeva,
Martin Lüders,
Miguel A. L. Marques,
Sebastian T. Ohlmann
, et al. (9 additional authors not shown)
Abstract:
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a…
▽ More
Over the last years extraordinary advances in experimental and theoretical tools have allowed us to monitor and control matter at short time and atomic scales with a high-degree of precision. An appealing and challenging route towards engineering materials with tailored properties is to find ways to design or selectively manipulate materials, especially at the quantum level. To this end, having a state-of-the-art ab initio computer simulation tool that enables a reliable and accurate simulation of light-induced changes in the physical and chemical properties of complex systems is of utmost importance. The first principles real-space-based Octopus project was born with that idea in mind, providing an unique framework allowing to describe non-equilibrium phenomena in molecular complexes, low dimensional materials, and extended systems by accounting for electronic, ionic, and photon quantum mechanical effects within a generalized time-dependent density functional theory framework. The present article aims to present the new features that have been implemented over the last few years, including technical developments related to performance and massive parallelism. We also describe the major theoretical developments to address ultrafast light-driven processes, like the new theoretical framework of quantum electrodynamics density-functional formalism (QEDFT) for the description of novel light-matter hybrid states. Those advances, and other being released soon as part of the Octopus package, will enable the scientific community to simulate and characterize spatial and time-resolved spectroscopies, ultrafast phenomena in molecules and materials, and new emergent states of matter (QED-materials).
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
Stress effects on vibrational spectra of a cubic hybrid perovskite: A probe of local strain
Authors:
Kuntal Talit,
David A. Strubbe
Abstract:
Inhomogeneous strain may develop in hybrid organic metal-halide perovskite thin films due to thermal expansion mismatch with a fabrication substrate, polycrystallinity or even light soaking. Measuring these spatially varying strains is difficult but of prime importance for understanding the effects on carrier mobility, non-radiative recombination, degradation and other optoelectronic properties. L…
▽ More
Inhomogeneous strain may develop in hybrid organic metal-halide perovskite thin films due to thermal expansion mismatch with a fabrication substrate, polycrystallinity or even light soaking. Measuring these spatially varying strains is difficult but of prime importance for understanding the effects on carrier mobility, non-radiative recombination, degradation and other optoelectronic properties. Local strain can be mapped using the shifts in vibrational frequencies using Raman or infrared microscopy. We use density functional theory to investigate the effect of uniaxial strain on the vibrations of pseudo-cubic methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$), and identify the vibrational modes most favorable for local strain map** (86 cm$^{-1}$, 97 cm$^{-1}$, 1457 cm$^{-1}$, and 1537 cm$^{-1}$) and provide calibration curves. We explain the origin of the frequency changes with strain using dynamical matrix and mode eigenvector analysis and study strain-induced structural changes. We also calculate mode Grüneisen parameters, giving information about anharmonicity and anisotropic negative thermal expansion as recently reported for other phases. Our results provide a basis for strain map** in hybrid perovskites to further the understanding and control of strain, and improve stability and photovoltaic performance.
△ Less
Submitted 21 November, 2020; v1 submitted 8 July, 2019;
originally announced July 2019.
-
Computational generation of voids in $a$-Si and $a$-Si:H by cavitation at low density
Authors:
Enrique Guerrero,
David A. Strubbe
Abstract:
Use of amorphous silicon ($a$-Si) and hydrogenated amorphous silicon ($a$-Si:H) in photovoltaics has been limited by light-induced degradation (the Staebler-Wronski effect) and low hole mobilities, and voids have been implicated in both problems. Accurately modeling the void microstructure is critical to theoretically understanding the cause of these issues. Previous methods of modeling voids have…
▽ More
Use of amorphous silicon ($a$-Si) and hydrogenated amorphous silicon ($a$-Si:H) in photovoltaics has been limited by light-induced degradation (the Staebler-Wronski effect) and low hole mobilities, and voids have been implicated in both problems. Accurately modeling the void microstructure is critical to theoretically understanding the cause of these issues. Previous methods of modeling voids have involved removing atoms according to an {\it a priori} idea of void structure and/or using computationally expensive molecular dynamics. We propose a new fast and unbiased approach based on the established and efficient Wooten-Winer-Weaire (WWW) Monte Carlo method, by using a range of fixed densities to generate equilibrium structures of $a$-Si and $a$-Si:H that maintain 4-coordination. We find a smooth evolution in bond lengths, bond angles, and bond angle deviations $Δθ$ as the density is changed around the equilibrium value of $4.9\times10^{22}\ $atoms/cm$^3$. However, a significant change occurs at densities below $4.3\times10^{22}\ $atoms/cm$^3$, where voids begin to form to relieve tensile stress, akin to a cavitation process in liquids. We find both small voids (radius $\sim$3 Å) and larger ones (up to 7 Å), which compare well with available experimental data. The voids have an influence on atomic structure up to 4 Åbeyond the void surface and are associated with decreasing structural order, measured by $Δθ$. We also observe an increasing medium-range dihedral order with increasing density. Our method allows fast generation of statistical ensembles, resembles a physical process during experimental deposition, and provides a set of void structures for further studies of their effects on degradation, hole mobility, two-level systems, thermal transport, and elastic properties.
△ Less
Submitted 18 January, 2020; v1 submitted 2 July, 2019;
originally announced July 2019.
-
Solid Lubrication with MoS$_2$: A Review
Authors:
Mohammad R. Vazirisereshk,
Ashlie Martini,
David A. Strubbe,
Mehmet Z. Baykara
Abstract:
Molybdenum disulfide (MoS$_2$) is one of the most broadly utilized solid lubricants with a wide range of applications, including but not limited to those in the aerospace/space industry. Here we present a focused review of solid lubrication with MoS$_2$ by highlighting its structure, synthesis, applications and the fundamental mechanisms underlying its lubricative properties, together with a discu…
▽ More
Molybdenum disulfide (MoS$_2$) is one of the most broadly utilized solid lubricants with a wide range of applications, including but not limited to those in the aerospace/space industry. Here we present a focused review of solid lubrication with MoS$_2$ by highlighting its structure, synthesis, applications and the fundamental mechanisms underlying its lubricative properties, together with a discussion of their environmental and temperature dependence. An effort is made to cover the main theoretical and experimental studies that constitute milestones in our scientific understanding. The review also includes an extensive overview of the structure and tribological properties of doped MoS$_2$, followed by a discussion of potential future research directions.
△ Less
Submitted 13 June, 2019;
originally announced June 2019.
-
Thermodynamic limits to energy conversion in solar thermal fuels
Authors:
David A Strubbe,
Jeffrey C Grossman
Abstract:
Solar thermal fuels (STFs) are an unconventional paradigm for solar energy conversion and storage which is attracting renewed attention. In this concept, a material absorbs sunlight and stores the energy chemically via an induced structural change, which can later be reversed to release the energy as heat. An example is the azobenzene molecule which has a cis-trans photoisomerization with these pr…
▽ More
Solar thermal fuels (STFs) are an unconventional paradigm for solar energy conversion and storage which is attracting renewed attention. In this concept, a material absorbs sunlight and stores the energy chemically via an induced structural change, which can later be reversed to release the energy as heat. An example is the azobenzene molecule which has a cis-trans photoisomerization with these properties, and can be tuned by chemical substitution and attachment to templates such as carbon nanotubes, small molecules, or polymers. By analogy to the Shockley-Queisser limit for photovoltaics, we analyze the maximum attainable efficiency for STFs from fundamental thermodynamic considerations. Microscopic reversibility provides a bound on the quantum yield of photoisomerization due to fluorescence, regardless of details of photochemistry. We emphasize the importance of analyzing the free energy, not just enthalpy, of the metastable molecules, and find an efficiency limit for conversion to stored chemical energy equal to the Shockley-Queisser limit. STF candidates from a recent high-throughput search are analyzed in light of the efficiency limit.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Orbital magneto-optical response of periodic insulators from first principles
Authors:
Irina V. Lebedeva,
David A. Strubbe,
Ilya V. Tokatly,
Angel Rubio
Abstract:
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-depende…
▽ More
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-dependent electromagnetic fields under periodic boundary conditions, which allows us to treat the orbital magneto-optical response of solids at the \textit{ab initio} level. The efficiency of the computational scheme proposed is comparable to standard linear-response calculations of absorption spectra and the results of tests for molecules and solids agree with the available experimental data. A clear signature of the valley Zeeman effect is revealed in the continuum magneto-optical spectrum of a single layer of hexagonal boron nitride. The present formalism opens the path towards the study of magneto-optical effects in strongly driven low-dimensional systems.
△ Less
Submitted 25 February, 2019; v1 submitted 26 June, 2018;
originally announced June 2018.
-
Stress effects on the Raman spectrum of an amorphous material: theory and experiment on a-Si:H
Authors:
David A. Strubbe,
Eric C. Johlin,
Timothy R. Kirkpatrick,
Tonio Buonassisi,
Jeffrey C. Grossman
Abstract:
Strain in a material induces shifts in vibrational frequencies, which is a probe of the nature of the vibrations and interatomic potentials, and can be used to map local stress/strain distributions via Raman microscopy. This method is standard for crystalline silicon devices, but due to lack of calibration relations, it has not been applied to amorphous materials such as hydrogenated amorphous sil…
▽ More
Strain in a material induces shifts in vibrational frequencies, which is a probe of the nature of the vibrations and interatomic potentials, and can be used to map local stress/strain distributions via Raman microscopy. This method is standard for crystalline silicon devices, but due to lack of calibration relations, it has not been applied to amorphous materials such as hydrogenated amorphous silicon (a-Si:H), a widely studied material for thin-film photovoltaic and electronic devices. We calculated the Raman spectrum of a-Si:H \ab initio under different strains $ε$ and found peak shifts $Δω= \left( -460 \pm 10\ \mathrm{cm}^{-1} \right) {\rm Tr}\ ε$. This proportionality to the trace of the strain is the general form for isotropic amorphous vibrational modes, as we show by symmetry analysis and explicit computation. We also performed Raman measurements under strain and found a consistent coefficient of $-510 \pm 120\ \mathrm{cm}^{-1}$. These results demonstrate that a reliable calibration for the Raman/strain relation can be achieved even for the broad peaks of an amorphous material, with similar accuracy and precision as for crystalline materials.
△ Less
Submitted 3 November, 2015;
originally announced November 2015.
-
Temperature-dependent thermal conductivity in nanoporous materials studied by the Boltzmann Transport Equation
Authors:
Giuseppe Romano,
Keivan Esfarjani,
David A. Strubbe,
David Broido,
Alexie M. Kolpak
Abstract:
Nanostructured materials exhibit low thermal conductivity because of the additional scattering due to phonon-boundary interactions. As these interactions are highly sensitive to the mean free path (MFP) of a given phonon mode, MFP distributions in nanostructures can be dramatically distorted relative to bulk. Here we calculate the MFP distribution in periodic nanoporous Si for different temperatur…
▽ More
Nanostructured materials exhibit low thermal conductivity because of the additional scattering due to phonon-boundary interactions. As these interactions are highly sensitive to the mean free path (MFP) of a given phonon mode, MFP distributions in nanostructures can be dramatically distorted relative to bulk. Here we calculate the MFP distribution in periodic nanoporous Si for different temperatures, using the recently developed MFP-dependent Boltzmann Transport Equation. After analyzing the relative contribution of each phonon branch to thermal transport in nanoporous Si, we find that at room temperature optical phonons contribute 18 % to heat transport, compared to 5% in bulk Si. Interestingly, we observe a steady thermal conductivity in the nanoporous materials over a temperature range 200 K < T < 300 K, which we attribute to the ballistic transport of acoustic phonons with long intrinsic MFP. These results, which are also consistent with a recent experimental study, shed light on the origin of the reduction of thermal conductivity in nanostructured materials, and could contribute to multiscale heat transport engineering, in which the bulk material and geometry are optimized concurrently.
△ Less
Submitted 27 May, 2015; v1 submitted 22 May, 2015;
originally announced May 2015.
-
Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems
Authors:
Xavier Andrade,
David A. Strubbe,
Umberto De Giovannini,
Ask Hjorth Larsen,
Micael J. T. Oliveira,
Joseba Alberdi-Rodriguez,
Alejandro Varas,
Iris Theophilou,
Nicole Helbig,
Matthieu Verstraete,
Lorenzo Stella,
Fernando Nogueira,
Alán Aspuru-Guzik,
Alberto Castro,
Miguel A. L. Marques,
Ángel Rubio
Abstract:
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of…
▽ More
Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schrödinger equation for low-dimensionality systems.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
BerkeleyGW: A Massively Parallel Computer Package for the Calculation of the Quasiparticle and Optical Properties of Materials and Nanostructures
Authors:
Jack Deslippe,
Georgy Samsonidze,
David A. Strubbe,
Manish Jain,
Marvin L. Cohen,
Steven G. Louie
Abstract:
BerkeleyGW is a massively parallel computational package for electron excited-state properties that is based on the many-body perturbation theory employing the ab initio GW and GW plus Bethe-Salpeter equation methodology. It can be used in conjunction with many density-functional theory codes for ground-state properties, including PARATEC, PARSEC, Quantum ESPRESSO, OCTOPUS and SIESTA. The package…
▽ More
BerkeleyGW is a massively parallel computational package for electron excited-state properties that is based on the many-body perturbation theory employing the ab initio GW and GW plus Bethe-Salpeter equation methodology. It can be used in conjunction with many density-functional theory codes for ground-state properties, including PARATEC, PARSEC, Quantum ESPRESSO, OCTOPUS and SIESTA. The package can be used to compute the electronic and optical properties of a wide variety of material systems from bulk semiconductors and metals to nanostructured materials and molecules. The package scales to 10,000's of CPUs and can be used to study systems containing up to 100's of atoms.
△ Less
Submitted 1 August, 2012; v1 submitted 18 November, 2011;
originally announced November 2011.
-
Reversible Photomechanical Switching of Individual Engineered Molecules at a Surface
Authors:
Matthew J. Comstock,
Niv Levy,
Armen Kirakosian,
Jongweon Cho,
Frank Lauterwasser,
Jessica H. Harvey,
David A. Strubbe,
Jean M. J. Frechet,
Dirk Trauner,
Steven G. Louie,
Michael F. Crommie
Abstract:
We have observed reversible light-induced mechanical switching for a single organic molecule bound to a metal surface. Scanning tunneling microscopy (STM) was used to image the features of an individual azobenzene molecule on Au(111) before and after reversibly cycling its mechanical structure between trans and cis states using light. Azobenzene molecules were engineered to increase their surfac…
▽ More
We have observed reversible light-induced mechanical switching for a single organic molecule bound to a metal surface. Scanning tunneling microscopy (STM) was used to image the features of an individual azobenzene molecule on Au(111) before and after reversibly cycling its mechanical structure between trans and cis states using light. Azobenzene molecules were engineered to increase their surface photomechanical activity by attaching varying numbers of tert-butyl (TB) ligands ("legs") to the azobenzene phenyl rings. STM images show that increasing the number of TB legs "lifts" the azobenzene molecules from the substrate, thereby increasing molecular photomechanical activity by decreasing molecule-surface coupling.
△ Less
Submitted 8 May, 2007; v1 submitted 7 December, 2006;
originally announced December 2006.
