Showing 1–7 of 7 results for author: Strohman, C R

Measurement Techniques for Low Emittance Tuning and Beam Dynamics at CESR

Authors: M. G. Billing, J. A. Dobbins, M. J. Forster, D. L. Kreinick, R. E. Meller, D. P. Peterson, G. A. Ramirez, M. C. Rendina, N. T. Rider, D. C. Sagan, J. Shanks, J. P. Sikora, M. G. Stedinger, C. R. Strohman, H. A. Williams, M. A. Palmer, R. L. Holtzapple, J. Flanagan

Abstract: After operating as a High Energy Physics electron-positron collider, the Cornell Electron-positron Storage Ring (CESR) has been converted to become a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS). Over the course of several years CESR was adapted for accelerator physics research as a test accelerator, capable of studying topics relevant to future dam**… ▽ More After operating as a High Energy Physics electron-positron collider, the Cornell Electron-positron Storage Ring (CESR) has been converted to become a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS). Over the course of several years CESR was adapted for accelerator physics research as a test accelerator, capable of studying topics relevant to future dam** rings, colliders and light sources. Initially some specific topics were targeted for accelerator physic research with the storage ring in this mode, labeled CesrTA. These topics included 1) tuning techniques to produce low emittance beams, 2) the study of electron cloud (EC) development in a storage ring and 3) intra-beam scattering effects. The complete conversion of CESR to CesrTA occurred over a several year period, described elsewhere. A number of specific instruments were developed for CesrTA. Much of the pre-existing instrumentation was modified to accommodate the scope of these studies and these are described in a companion paper. To complete this research, a number of procedures were developed or modified, often requiring coordinated measurements among different instruments. This paper provides an overview of types of measurements employed for the study of beam dynamics during the operation of CesrTA. △ Less

Submitted 15 March, 2018; v1 submitted 30 January, 2018; originally announced January 2018.

Instrumentation for the Study of Low Emittance Tuning and Beam Dynamics at CESR

Authors: M. G. Billing, J. A. Dobbins, M. J. Forster, D. L. Kreinick, R. E. Meller, D. P. Peterson, G. A. Ramirez, M. C. Rendina, N. T. Rider, D. C. Sagan, J. Shanks, J. P. Sikora, M. G. Stedinger, C. R. Strohman, H. A. Williams, M. A. Palmer, R. L. Holtzapple, J. Flanagan

Abstract: The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future dam** rings, colliders and light sources. Some of the sp… ▽ More The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future dam** rings, colliders and light sources. Some of the specific topics that were targeted for the initial phase of operation of the storage ring in this mode for CESR as a Test Accelerator (CesrTA) included 1) tuning techniques to produce low emittance beams, 2) the study of electron cloud development in a storage ring and 3) intra-beam scattering effects. The complete conversion of CESR to CesrTA occurred over a several year period, described elsewhere. In addition to instrumentation for the storage ring, which was created for CesrTA, existing instrumentation was modified to facilitate the entire range of investigations to support these studies. Procedures were developed, often requiring coordinated measurements among different instruments. This paper describes the instruments utilized for the study of beam dynamics during the operation of CesrTA. The treatment of these instruments will remain fairly general in this paper as it focusses on an overview of the instruments themselves. Their interaction and inter-relationships during sequences of observations is found in a companion paper describing the associated measurement techniques. More detailed descriptions and detailed operational performance for some of the instrumentation may be found elsewhere and these will be referenced in the related sections of this paper. △ Less

Submitted 14 November, 2017; v1 submitted 4 October, 2017; originally announced October 2017.

Beam Position Monitoring System at CESR

Authors: M. G. Billing, W. F. Bergan, M. J. Forster, R. E. Meller, M. C. Rendina, N. T. Rider, D. C. Sagan, J. Shanks, J. P. Sikora, M. G. Stedinger, C. R. Strohman, M. A. Palmer, R. L. Holtzapple

Abstract: The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future dam** rings, colliders and light sources. Some of the sp… ▽ More The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future dam** rings, colliders and light sources. Some of the specific topics that were targeted for the initial phase of operation of the storage ring in this mode, labeled CesrTA (CESR as a Test Accelerator), included 1) tuning techniques to produce low emittance beams, 2) the study of electron cloud development in a storage ring and 3) intra-beam scattering effects. The complete conversion of CESR to CesrTA occurred over a several year period, described elsewhere. As a part of this conversion the CESR beam position monitoring (CBPM) system was completely upgraded to provide the needed instrumental capabilities for these studies. This paper describes the new CBPM system hardware, its function and representative measurements performed by the upgraded system. △ Less

Submitted 4 August, 2017; v1 submitted 1 June, 2017; originally announced June 2017.

The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 4: Superconducting Wiggler Diagnostics

Authors: M. G. Billing, S. Greenwald, X. Liu, Y. Li, D. Sabol, E. N. Smith, C. R. Strohman, M. A. Palmer, D. V. Munson

Abstract: Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it appropriate for the study of a wide spectrum of accelerator physics issues and instrumentation… ▽ More Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it appropriate for the study of a wide spectrum of accelerator physics issues and instrumentation related to present light sources and future lepton dam** rings. Additionally a number of these are also relevant for the beam physics of proton accelerators. This paper, the last in a series of four, describes the vacuum system modifications of the superconducting wigglers to accommodate the diagnostic instrumentation for the study of electron cloud (EC) behavior within wigglers. Earlier papers provided an overview of the accelerator physics program, the general modifications of CESR, the modifications of the vacuum system necessary for the conversion of CESR to the test accelerator, CesrTA, enhanced to study such subjects as low emittance tuning methods, EC effects, intra-beam scattering, fast ion instabilities as well as general improvements to beam instrumentation. While the initial studies of CesrTA focussed on questions related to the International Linear Collider dam** ring design, CESR is a very versatile storage ring, capable of studying a wide range of accelerator physics and instrumentation questions. △ Less

Submitted 18 October, 2016; v1 submitted 23 August, 2016; originally announced August 2016.

The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 3: Electron Cloud Diagnostics

Authors: M. G. Billing, J. V. Conway, J. A. Crittendan, S. Greenwald, Y. Li, R. E. Meller, C. R. Strohman, J. P. Sikora, J. R. Calvey, M. A. Palmer

Abstract: Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it ideal for the study of a wide spectrum of accelerator physics issues and instrumentation relate… ▽ More Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it ideal for the study of a wide spectrum of accelerator physics issues and instrumentation related to present light sources and future lepton dam** rings. Additionally a number of these are also relevant for the beam physics of proton accelerators. This paper is the third in a series of four describing the the conversion of CESR to the test accelerator, CesrTA. The first two papers discuss the overall plan for the conversion of the storage ring to an instrument capable of studying advanced accelerator physics issues and the details of the vacuum system upgrades. This paper focusses on the necessary development of new instrumentation, situated in four dedicated experimental regions, capable of studying such phenomena as electron clouds (ECs) and methods to mitigate EC effects. The fourth paper in this series describes the vacuum system modifications of the superconducting wigglers to accommodate the diagnostic instrumentation for the study of EC behavior within wigglers. While the initial studies of CesrTA focussed on questions related to the International Linear Collider dam** ring design, CesrTA is a very versatile storage ring, capable of studying a wide range of accelerator physics and instrumentation questions. △ Less

Submitted 31 March, 2016; v1 submitted 2 December, 2015; originally announced December 2015.

Comments: 36 pages and 38 figures

In-Situ Measurements of the Secondary Electron Yield in an Accelerator Environment: Instrumentation and Methods

Authors: W. H. Hartung, D. M. Asner, J. V. Conway, C. A. Dennett, S. Greenwald, J. -S. Kim, Y. Li, T. P. Moore, V. Omanovic, M. A. Palmer, C. R. Strohman

Abstract: The performance of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the chamber walls can contribute to EC growth. An apparatus for in-situ measurements of the secondary electron yield (SEY) in the Cornell Electron Storage Ring (CESR) was developed in connection with EC studies for the CESR Test Accelerator prog… ▽ More The performance of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the chamber walls can contribute to EC growth. An apparatus for in-situ measurements of the secondary electron yield (SEY) in the Cornell Electron Storage Ring (CESR) was developed in connection with EC studies for the CESR Test Accelerator program. The CESR in-situ system, in operation since 2010, allows for SEY measurements as a function of incident electron energy and angle on samples that are exposed to the accelerator environment, typically 5.3 GeV counter-rotating beams of electrons and positrons. The system was designed for periodic measurements to observe beam conditioning of the SEY with discrimination between exposure to direct photons from synchrotron radiation versus scattered photons and cloud electrons. The samples can be exchanged without venting the CESR vacuum chamber. Measurements have been done on metal surfaces and EC-mitigation coatings. The in-situ SEY apparatus and improvements to the measurement tools and techniques are described. △ Less

Submitted 10 December, 2014; originally announced December 2014.

Comments: 16 pages, 18 figures; this paper is a condensed version of arXiv:1407.0772

Report on Instrumentation and Methods for In-Situ Measurements of the Secondary Electron Yield in an Accelerator Environment

Authors: W. H. Hartung, D. M. Asner, J. V. Conway, C. A. Dennett, S. Greenwald, J. -S. Kim, Y. Li, T. P. Moore, V. Omanovic, M. A. Palmer, C. R. Strohman

Abstract: The achievable beam current and beam quality of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the walls of the vacuum chamber can contribute to the growth of the electron cloud. An apparatus for in-situ measurements of the secondary electron yield (SEY) of samples in the vacuum chamber of the Cornell Electron… ▽ More The achievable beam current and beam quality of a particle accelerator can be limited by the build-up of an electron cloud (EC) in the vacuum chamber. Secondary electron emission from the walls of the vacuum chamber can contribute to the growth of the electron cloud. An apparatus for in-situ measurements of the secondary electron yield (SEY) of samples in the vacuum chamber of the Cornell Electron Storage Ring (CESR) has been developed in connection with EC studies for the CESR Test Accelerator program (CesrTA). The CesrTA in-situ system, in operation since 2010, allows for SEY measurements as a function of incident electron energy and angle on samples that are exposed to the accelerator environment, typically 5.3 GeV counter-rotating beams of electrons and positrons. The system was designed for periodic measurements to observe beam conditioning of the SEY with discrimination between exposure to direct photons from synchrotron radiation versus scattered photons and cloud electrons. The SEY chambers can be isolated from the CESR beam pipe, allowing us to exchange samples without venting the CESR vacuum chamber. Measurements so far have been on metal surfaces and EC-mitigation coatings. The goal of the SEY measurement program is to improve predictive models for EC build-up and EC-induced beam effects. This report describes the CesrTA in-situ SEY apparatus, the measurement tool and techniques, and iterative improvements therein. △ Less

Submitted 8 December, 2014; v1 submitted 2 July, 2014; originally announced July 2014.

Comments: 32 pages, 27 figures; added new figures in Sections 5.4 and 5.10, added Appendix F; miscellaneous additions and corrections