-
Molecular beam epitaxy growth of superconducting tantalum germanide
Authors:
Patrick J. Strohbeen,
Aurelia M. Brook,
Ido Levy,
Wendy L. Sarney,
Jechiel van Dijk,
Hayden Orth,
Melissa Mikalsen,
Javad Shabani
Abstract:
Develo** new material platforms for use in superconductor-semiconductor hybrid structures is desirable due to limitations caused by intrinsic microwave losses present in commonly used III/V material systems. With the recent reports that tantalum provides drastic improvements when implemented in superconducting circuit elements over traditional Nb and Al films, exploring Ta as an alternative supe…
▽ More
Develo** new material platforms for use in superconductor-semiconductor hybrid structures is desirable due to limitations caused by intrinsic microwave losses present in commonly used III/V material systems. With the recent reports that tantalum provides drastic improvements when implemented in superconducting circuit elements over traditional Nb and Al films, exploring Ta as an alternative superconductor in hybrid material systems seems necessary. Here, we present our study on the growth of Ta on semiconducting Ge (001) substrates grown via molecular beam epitaxy. We show that the Ta diffuses into the Ge matrix in a self-limiting nature resulting in extremely smooth and abrupt surfaces and interfaces that are ideal for future cQED device fabrication. The films have a nominal composition of TaGe$_{2}$ and form a native oxide of nominal composition Ta$_{2}$Ge$_{2}$O$_{5}$ that also forms a sharp interface with the underlying film. These films are superconducting with a $T_{C}\sim 1.8-2$K and $H_{C}^{\perp} \sim 1.88T$, $H_{C}^{\parallel} \sim 5.1T$.
△ Less
Submitted 2 December, 2023;
originally announced December 2023.
-
Characterizing losses in InAs two-dimensional electron gas-based gatemon qubits
Authors:
William M. Strickland,
Lukas J. Baker,
Jaewoo Lee,
Krishna Dindial,
Bassel Heiba Elfeky,
Patrick J. Strohbeen,
Mehdi Hatefipour,
Peng Yu,
Ido Levy,
Jacob Issokson,
Vladimir E. Manucharyan,
Javad Shabani
Abstract:
The tunnelling of cooper pairs across a Josephson junction (JJ) allow for the nonlinear inductance necessary to construct superconducting qubits, amplifiers, and various other quantum circuits. An alternative approach using hybrid superconductor-semiconductor JJs can enable superconducting qubit architectures with all electric control. Here we present continuous-wave and time-domain characterizati…
▽ More
The tunnelling of cooper pairs across a Josephson junction (JJ) allow for the nonlinear inductance necessary to construct superconducting qubits, amplifiers, and various other quantum circuits. An alternative approach using hybrid superconductor-semiconductor JJs can enable superconducting qubit architectures with all electric control. Here we present continuous-wave and time-domain characterization of gatemon qubits and coplanar waveguide resonators based on an InAs two-dimensional electron gas. We show that the qubit undergoes a vacuum Rabi splitting with a readout cavity and we drive coherent Rabi oscillations between the qubit ground and first excited states. We measure qubit relaxation times to be $T_1 =$ 100 ns over a 1.5 GHz tunable band. We detail the loss mechanisms present in these materials through a systematic study of the quality factors of coplanar waveguide resonators. While various loss mechanisms are present in III-V gatemon circuits we detail future directions in enhancing the relaxation times of qubit devices on this platform.
△ Less
Submitted 20 February, 2024; v1 submitted 29 September, 2023;
originally announced September 2023.
-
Superconductivity in hyperdoped Ge by molecular beam epitaxy
Authors:
Patrick J. Strohbeen,
Aurelia M. Brook,
Wendy L. Sarney,
Javad Shabani
Abstract:
Superconducting germanium films are an intriguing material for possible applications in fields such as cryogenic electronics and quantum bits. Recently, there has been great deal of progress in hyperdo** of Ga doped Ge using ion implantation. The thin film growths would be advantageous allowing homoepitaxy of doped and undoped Ge films opening possibilities for vertical Josephson junctions. Here…
▽ More
Superconducting germanium films are an intriguing material for possible applications in fields such as cryogenic electronics and quantum bits. Recently, there has been great deal of progress in hyperdo** of Ga doped Ge using ion implantation. The thin film growths would be advantageous allowing homoepitaxy of doped and undoped Ge films opening possibilities for vertical Josephson junctions. Here, we present our studies on the growth of one layer of hyperdoped superconducting germanium thin film via molecular beam epitaxy. We observe a fragile superconducting phase which is extremely sensitive to processing conditions and can easily phase-segregate, forming a percolated network of pure gallium metal. By suppressing phase segregation through temperature control we find a superconducting phase that is unique and appears coherent to the underlying Ge substrate.
△ Less
Submitted 4 September, 2023; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Selective area epitaxy of GaAs films using patterned graphene on Ge
Authors:
Zheng Hui Lim,
Sebastian Manzo,
Patrick J. Strohbeen,
Vivek Saraswat,
Michael S. Arnold,
Jason K. Kawasaki
Abstract:
We demonstrate selective area epitaxy of GaAs films using patterned graphene masks on a Ge (001) substrate. The GaAs selectively grows on exposed regions of the Ge substrate, for graphene spacings as large as 10 microns. The selectivity is highly dependent on the growth temperature and annealing time, which we explain in terms of temperature dependent sticking coefficients and surface diffusion. T…
▽ More
We demonstrate selective area epitaxy of GaAs films using patterned graphene masks on a Ge (001) substrate. The GaAs selectively grows on exposed regions of the Ge substrate, for graphene spacings as large as 10 microns. The selectivity is highly dependent on the growth temperature and annealing time, which we explain in terms of temperature dependent sticking coefficients and surface diffusion. The high nucleation selectivity over several microns sets constraints on experimental realizations of remote epitaxy.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Quantifying Mn diffusion through transferred versus directly-grown graphene barriers
Authors:
Patrick J. Strohbeen,
Sebastian Manzo,
Vivek Saraswat,
Katherine Su,
Michael S. Arnold,
Jason K. Kawasaki
Abstract:
We quantify the mechanisms for manganese (Mn) diffusion through graphene in Mn/graphene/Ge (001) and Mn/graphene/GaAs (001) heterostructures for samples prepared by graphene layer transfer versus graphene growth directly on the semiconductor substrate. These heterostructures are important for applications in spintronics; however, challenges in synthesizing graphene directly on technologically impo…
▽ More
We quantify the mechanisms for manganese (Mn) diffusion through graphene in Mn/graphene/Ge (001) and Mn/graphene/GaAs (001) heterostructures for samples prepared by graphene layer transfer versus graphene growth directly on the semiconductor substrate. These heterostructures are important for applications in spintronics; however, challenges in synthesizing graphene directly on technologically important substrates such as GaAs necessitate layer transfer and anneal steps, which introduce defects into the graphene. \textit{In-situ} photoemission spectroscopy measurements reveal that Mn diffusion through graphene grown directly on a Ge (001) substrate is 1000 times lower than Mn diffusion into samples without graphene ($D_{gr,direct} \sim 4\times10^{-18}$cm$^2$/s, $D_{no-gr} \sim 5 \times 10^{-15}$ cm$^2$/s at 500$^\circ$C). Transferred graphene on Ge suppresses the Mn in Ge diffusion by a factor of 10 compared to no graphene ($D_{gr,transfer} \sim 4\times10^{-16}cm^2/s$). For both transferred and directly-grown graphene, the low activation energy ($E_a \sim 0.1-0.5$ eV) suggests that Mn diffusion through graphene occurs primarily at graphene defects. This is further confirmed as the diffusivity prefactor, $D_0$, scales with the defect density of the graphene sheet. Similar diffusion barrier performance is found on GaAs substrates; however, it is not currently possible to grow graphene directly on GaAs. Our results highlight the importance of develo** graphene growth directly on functional substrates, to avoid the damage induced by layer transfer and annealing.
△ Less
Submitted 11 September, 2021; v1 submitted 2 June, 2021;
originally announced June 2021.
-
Pinhole-seeded lateral epitaxy and exfoliation of GaSb films on graphene-terminated surfaces
Authors:
Sebastian Manzo,
Patrick J. Strohbeen,
Zheng-Hui Lim,
Vivek Saraswat,
Michael S. Arnold,
Jason K. Kawasaki
Abstract:
Remote epitaxy is a promising approach for synthesizing exfoliatable crystalline membranes and enabling epitaxy of materials with large lattice mismatch. However, the atomic scale mechanisms for remote epitaxy remain unclear. Here we experimentally demonstrate that GaSb films grow on graphene-terminated GaSb (001) via a seeded lateral epitaxy mechanism, in which pinhole defects in the graphene ser…
▽ More
Remote epitaxy is a promising approach for synthesizing exfoliatable crystalline membranes and enabling epitaxy of materials with large lattice mismatch. However, the atomic scale mechanisms for remote epitaxy remain unclear. Here we experimentally demonstrate that GaSb films grow on graphene-terminated GaSb (001) via a seeded lateral epitaxy mechanism, in which pinhole defects in the graphene serve as selective nucleation sites, followed by lateral epitaxy and coalescence into a continuous film. Remote interactions are not necessary in order to explain the growth. Importantly, the small size of the pinholes permits exfoliation of continuous, free-standing GaSb membranes. Due to the chemical similarity between GaSb and other III-V materials, we anticipate this mechanism to apply more generally to other materials. By combining molecular beam epitaxy with \textit{in-situ} electron diffraction and photoemission, plus \textit{ex-situ} atomic force microscopy and Raman spectroscopy, we track the graphene defect generation and GaSb growth evolution a few monolayers at a time. Our results show that the controlled introduction of nanoscale openings in graphene provides a powerful route towards tuning the growth and properties of epitaxial films and membranes on 2D materials.
△ Less
Submitted 12 August, 2022; v1 submitted 1 June, 2021;
originally announced June 2021.
-
Solid phase epitaxial growth of the correlated-electron transparent conducting oxide SrVO3
Authors:
Samuel D. Marks,
Lin Lin,
Peng Zuo,
Patrick J. Strohbeen,
Ryan Jacobs,
Dongxue Du,
Jason R. Waldvogel,
Rui Liu,
Donald E. Savage,
John H. Booske,
Jason K. Kawasaki,
Susan E. Babcock,
Dane Morgan,
Paul G. Evans
Abstract:
SrVO3 thin films with a high figure of merit for applications as transparent conductors were crystallized from amorphous layers using solid phase epitaxy (SPE). Epitaxial SrVO3 films crystallized on SrTiO3 using SPE exhibit a room temperature resistivity of 2.5 x 10-5 Ohms cm, a residual resistivity ratio of 3.8, and visible light transmission above 0.5 for a 60 nm-thick film. SrVO3 layers were de…
▽ More
SrVO3 thin films with a high figure of merit for applications as transparent conductors were crystallized from amorphous layers using solid phase epitaxy (SPE). Epitaxial SrVO3 films crystallized on SrTiO3 using SPE exhibit a room temperature resistivity of 2.5 x 10-5 Ohms cm, a residual resistivity ratio of 3.8, and visible light transmission above 0.5 for a 60 nm-thick film. SrVO3 layers were deposited at room temperature using radio-frequency sputtering in an amorphous form and subsequently crystallized by heating in controlled gas environment. The lattice parameters and mosaic angular width of x-ray reflections from the crystallized films are consistent with partial relaxation of the strain resulting from the epitaxial mismatch between SrVO3 and SrTiO3. A reflection high-energy electron diffraction study of the kinetics of SPE indicates that crystallization occurs via the thermally activated propagation of the crystalline/amorphous interface, similar to SPE phenomena in other perovskite oxides. Thermodynamic calculations based on density functional theory predict the temperature and oxygen partial pressure conditions required to produce the SrVO3 phase and are consistent with the experiments. The separate control of deposition and crystallization conditions in SPE presents new possibilities for the crystallization of transparent conductors in complex geometries and over large areas.
△ Less
Submitted 3 August, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
Electronic correlations in the semiconducting half-Heusler compound FeVSb
Authors:
Estiaque H. Shourov,
Patrick J. Strohbeen,
Dongxue Du,
Abhishek Sharan,
Felipe C. de Lima,
Fanny Rodolakis,
Jessica McChesney,
Vincent Yannello,
Anderson Janotti,
Turan Birol,
Jason K. Kawasaki
Abstract:
Electronic correlations are crucial to the low energy physics of metallic systems with localized $d$ and $f$ states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with filled shell configuration of 18 valence electrons per formula unit ($s^2 p^6 d^{10}$). Angle-reso…
▽ More
Electronic correlations are crucial to the low energy physics of metallic systems with localized $d$ and $f$ states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with filled shell configuration of 18 valence electrons per formula unit ($s^2 p^6 d^{10}$). Angle-resolved photoemission spectroscopy (ARPES) reveals a mass renormalization of $m^{*}/m_{bare}= 1.4$, where $m^{*}$ is the measured effective mass and $m_{bare}$ is the mass from density functional theory (DFT) calculations with no added on-site Coulomb repulsion. Our measurements are in quantitative agreement with dynamical mean field theory (DMFT) calculations, highlighting the many-body origin of the mass renormalization. This mass renormalization lies in dramatic contrast to other filled shell intermetallics, including the thermoelectric materials CoTiSb and NiTiSn; and has a similar origin to that in FeSi, where Hund's coupling induced fluctuations across the gap can explain a dynamical self-energy and correlations. Our work calls for a re-thinking of the role of correlations and Hund's coupling in intermetallic band insulators.
△ Less
Submitted 24 September, 2020; v1 submitted 24 September, 2020;
originally announced September 2020.
-
Semi-adsorption-controlled growth window for half Heusler FeVSb epitaxial films
Authors:
Estiaque H. Shourov,
Ryan Jacobs,
Wyatt A. Behn,
Zachary J. Krebs,
Chenyu Zhang,
Patrick J. Strohbeen,
Dongxue Du,
Paul M. Voyles,
Victor W. Brar,
Dane D. Morgan,
Jason K. Kawasaki
Abstract:
The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition $XYZ$ or $X_2 YZ$) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a \textit{semi} adsorption-controlled growth window for semiconducting half Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to th…
▽ More
The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition $XYZ$ or $X_2 YZ$) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a \textit{semi} adsorption-controlled growth window for semiconducting half Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by X-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). The highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb-vacancies may be a common defect. Similar \textit{semi} adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species $Z=$\{Sb, As, Bi\}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V ($X/Y$) transition metal stoichiometry.
△ Less
Submitted 27 September, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Control of polymorphism during epitaxial growth of hyperferroelectric candidate LiZnSb on GaSb (111)B
Authors:
Dongxue Du,
Patrick J. Strohbeen,
Hanjong Paik,
Chenyu Zhang,
Konrad Genser,
Karin M. Rabe,
Paul M. Voyles,
Darrell G. Schlom,
Jason K. Kawasaki
Abstract:
A major challenge for ferroelectric devices is the depolarization field, which competes with and often destroys long-range polar order in the limit of ultrathin films. Recent theoretical predictions suggest a new class of materials, termed hyperferroelectics, that should be robust against the depolarization field and enable ferroelectricity down to the monolayer limit. Here we demonstrate the epit…
▽ More
A major challenge for ferroelectric devices is the depolarization field, which competes with and often destroys long-range polar order in the limit of ultrathin films. Recent theoretical predictions suggest a new class of materials, termed hyperferroelectics, that should be robust against the depolarization field and enable ferroelectricity down to the monolayer limit. Here we demonstrate the epitaxial growth of hexagonal LiZnSb, one of the hyperferroelectric candidate materials, by molecular-beam epitaxy on GaSb (111)B substrates. Due to the high volatility of all three atomic species, we find that LiZnSb can be grown in an adsorption-controlled window, using an excess zinc flux. Within this window, the desired polar hexagonal phase is stabilized with respect to a competing cubic polymorph, as revealed by X-ray diffraction and transmission electron microscopy measurements. First-principles calculations show that for moderate amounts of epitaxial strain and moderate concentrations of Li vacancies, the cubic LiZnSb phase is lower in formation energy than the hexagonal phase, but only by a few meV per formula unit. Therefore we suggest that kinetics plays a role in stabilizing the desired hexagonal phase at low temperatures. Our results provide a path towards experimentally demonstrating ferroelectricity and hyperferroelectricity in a new class of ternary intermetallic compounds.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
High electrical conductivity in the epitaxial polar metals LaAuGe and LaPtSb
Authors:
Dongxue Du,
Amber Lim,
Chenyu Zhang,
Patrick J. Strohbeen,
Estiaque H. Shourov,
Fanny Rodolakis,
Jessica L. McChesney,
Paul Voyles,
Daniel C. Fredrickson,
Jason K. Kawasaki
Abstract:
Polar metals are an intriguing class of materials that simultaneously host free carriers and polar structural distortions. Despite the name "polar metal," however, most well-studied polar metals are poor electrical conductors. Here, we demonstrate the molecular beam epitaxial (MBE) growth of LaPtSb and LaAuGe, two polar metal compounds whose electrical resistivity is an order of magnitude lower th…
▽ More
Polar metals are an intriguing class of materials that simultaneously host free carriers and polar structural distortions. Despite the name "polar metal," however, most well-studied polar metals are poor electrical conductors. Here, we demonstrate the molecular beam epitaxial (MBE) growth of LaPtSb and LaAuGe, two polar metal compounds whose electrical resistivity is an order of magnitude lower than the well studied oxide polar metals. These materials belong to a broad family of $ABC$ intermetallics adopting the stuffed wurtzite structure, also known as hexagonal Heusler compounds. Scanning transmission electron microscopy (STEM) reveals a polar structure with unidirectionally buckled $BC$ (PtSb, AuGe) planes. Magnetotransport measurements demonstrate good metallic behavior with low residual resistivity ($ρ_{LaAuGe}=59.05$ $μΩ\cdot$cm and $ρ_{LaAPtSb}=27.81$ $μΩ\cdot$cm at 2K) and high carrier density ($n_h\sim 10^{21}$ cm$^{-3}$). Photoemission spectroscopy measurements confirm the band metallicity and are in quantitative agreement with density functional theory (DFT) calculations. Through DFT-Chemical Pressure and Crystal Orbital Hamilton Population analyses, the atomic packing factor is found to support the polar buckling of the structure, though the degree of direct interlayer $B-C$ bonding is limited by repulsion at the $A-C$ contacts. When combined with insulating hexagonal Heuslers, these materials provide a new platform for fully epitaxial, multiferroic heterostructures.
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
Electronically enhanced layer buckling and Au-Au dimerization in epitaxial LaAuSb films
Authors:
Patrick J. Strohbeen,
Dongxue Du,
Chenyu Zhang,
Estiaque H. Shourov,
Fanny Rodolakis,
Jessica L. McChesney,
Paul M. Voyles,
Jason K. Kawasaki
Abstract:
We report the molecular beam epitaxial growth, structure, and electronic measurements of single-crystalline LaAuSb films on Al$_2$O$_3$ (0001) substrates. LaAuSb belongs to a broad family of hexagonal $ABC$ intermetallics in which the magnitude and sign of layer buckling have strong effects on properties, e.g., predicted hyperferroelecticity, polar metallicity, and Weyl and Dirac states. Scanning…
▽ More
We report the molecular beam epitaxial growth, structure, and electronic measurements of single-crystalline LaAuSb films on Al$_2$O$_3$ (0001) substrates. LaAuSb belongs to a broad family of hexagonal $ABC$ intermetallics in which the magnitude and sign of layer buckling have strong effects on properties, e.g., predicted hyperferroelecticity, polar metallicity, and Weyl and Dirac states. Scanning transmission electron microscopy reveals highly buckled planes of Au-Sb atoms, with strong interlayer Au-Au interactions and a doubling of the unit cell. This buckling is four times larger than the buckling observed in other $ABC$s with similar composition, e.g. LaAuGe and LaPtSb. Photoemission spectroscopy measurements and comparison with theory suggest an electronic driving force for the Au-Au dimerization, since LaAuSb, with a 19-electron count, has one more valence electron per formula unit than most stable $ABC$s. Our results suggest that the electron count, in addition to conventional parameters such as epitaxial strain and chemical pressure, provides a powerful means for tuning the layer buckling in ferroic $ABC$s.
△ Less
Submitted 25 January, 2019;
originally announced January 2019.
