-
Control Software for the SST-1M Small-Size Telescope prototype for the Cherenkov Telescope Array
Authors:
V. Sliusar,
R. Walter,
C. Alispach,
I. Al Samarai,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
A. Frankowski,
M. Grudzińska,
M. Heller,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
J. Michałowski,
R. Moderski,
T. Montaruli
, et al. (18 additional authors not shown)
Abstract:
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA), the first prototype has already been deployed. The SST-1M control software of all subsystems (active mirror control, drive system, safety system, photo-detection plane…
▽ More
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA), the first prototype has already been deployed. The SST-1M control software of all subsystems (active mirror control, drive system, safety system, photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself (master controller) uses the standard software design proposed for all CTA telescopes based on the ALMA Common Software (ACS) developed to control the Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a separate ACS component, which handles the communication to and the operation of the subsystem. Interfacing with the actual hardware is performed via the OPC UA communication protocol, supported either natively by dedicated industrial standard servers (PLCs) or separate service applications developed to wrap lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early operations of the telescope without the camera were already carried out. The camera is fully assembled and is capable to perform data acquisition using artificial light source.
△ Less
Submitted 14 September, 2017; v1 submitted 13 September, 2017;
originally announced September 2017.
-
Development of a strategy for calibrating the novel SiPM camera of the SST-1M telescope proposed for the Cherenkov Telescope Array
Authors:
I. Al Samarai,
C. Alispach,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Nagai,
T. R. S. Njoh Ekoume,
I. Troyano Pujadas,
E. Lyard,
A. Neronov,
R. Walter,
V. Sliusar,
E. Mach,
J. Michałowski,
J. Niemiec,
J. Rafalski,
K. Skowron,
M. Stodulska,
M. Stodulski,
T. Bulik,
M. Grudzińska,
M. Jamrozy
, et al. (14 additional authors not shown)
Abstract:
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with 9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the requirements of the next generation ground based gamma-ray observatory CTA in the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of gamma-ray telescopes c…
▽ More
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with 9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the requirements of the next generation ground based gamma-ray observatory CTA in the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of gamma-ray telescopes can achieve good performance even during high night sky background conditions. Defining a fully automated calibration strategy of SiPM cameras is of great importance for large scale production validation and online calibration. The SST-1M sub-consortium developed a software compatible with CTA pipeline software (CTApipe). The calibration of the SST-1M camera is based on the Camera Test Setup (CTS), a set of LED boards mounted in front of the camera. The CTS LEDs are operated in pulsed or continuous mode to emulate signal and night sky background respectively. Continuous and pulsed light data analysis allows us to extract single pixel calibration parameters to be used during CTA operation.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Performance of a small size telescope (SST-1M) camera for gamma-ray astronomy with the Cherenkov Telescope Array
Authors:
I. Al Samarai,
C. Alispach,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Nagai,
T. R. S. Njoh Ekoume,
I. Troyano Pujadas,
E. Lyard,
A. Neronov,
R. Walter,
V. Sliusar,
E. Mach,
J. Michałowski,
J. Niemiec,
J. Rafalski,
K. Skowron,
M. Stodulska,
M. Stodulski,
T. Bulik,
M. Grudzińska,
M. Jamrozy
, et al. (14 additional authors not shown)
Abstract:
The foreseen implementations of the Small Size Telescopes (SST) in CTA will provide unique insights into the highest energy gamma rays offering fundamental means to discover and under- stand the sources populating the Galaxy and our local neighborhood. Aiming at such a goal, the SST-1M is one of the three different implementations that are being prototyped and tested for CTA. SST-1M is a Davies-Co…
▽ More
The foreseen implementations of the Small Size Telescopes (SST) in CTA will provide unique insights into the highest energy gamma rays offering fundamental means to discover and under- stand the sources populating the Galaxy and our local neighborhood. Aiming at such a goal, the SST-1M is one of the three different implementations that are being prototyped and tested for CTA. SST-1M is a Davies-Cotton single mirror telescope equipped with a unique camera technology based on SiPMs with demonstrated advantages over classical photomultipliers in terms of duty-cycle. In this contribution, we describe the telescope components, the camera, and the trigger and readout system. The results of the commissioning of the camera using a dedicated test setup are then presented. The performances of the camera first prototype in terms of expected trigger rates and trigger efficiencies for different night-sky background conditions are presented, and the camera response is compared to end-to-end simulations.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Cherenkov Telescope Array Contributions to the 35th International Cosmic Ray Conference (ICRC2017)
Authors:
F. Acero,
B. S. Acharya,
V. Acín Portella,
C. Adams,
I. Agudo,
F. Aharonian,
I. Al Samarai,
A. Alberdi,
M. Alcubierre,
R. Alfaro,
J. Alfaro,
C. Alispach,
R. Aloisio,
R. Alves Batista,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner,
E. Antolini,
L. A. Antonelli,
V. Antonuccio
, et al. (1117 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
△ Less
Submitted 24 October, 2017; v1 submitted 11 September, 2017;
originally announced September 2017.
-
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
C. Adams,
G. Agnetta,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
J. Alfaro,
R. Alfaro,
A. J. Allafort,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner
, et al. (1387 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
The Single Mirror Small Sized Telescope For The Cherenkov Telescope Array
Authors:
M. Heller,
E. jr Schioppa,
A. Porcelli,
I. Troyano Pujadas,
K. Zietara,
D. della Volpe,
T. Montaruli,
F. Cadoux,
Y. Favre,
J. A. Aguilar,
A. Christov,
E. Prandini,
P. Rajda,
M. Rameez,
W. Bilnik,
J. Blocki,
L. Bogacz,
J. Borkowski,
T. Bulik,
A. Frankowski,
M. Grudzinska,
B. Idzkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek
, et al. (24 additional authors not shown)
Abstract:
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include Medium Sized Telescopes (MST) in its threshold configuration. Optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the SST-1M uses…
▽ More
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include Medium Sized Telescopes (MST) in its threshold configuration. Optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the SST-1M uses a Davies-Cotton optics with a 4 m dish diameter with a field of view of 9 degrees. The Cherenkov light resulting from the interaction of the gamma-rays in the atmosphere is focused onto a 88 cm side-to-side hexagonal photo-detection plane. The latter is composed of 1296 hollow light guides coupled to large area hexagonal silicon photomultipliers (SiPM). The SiPM readout is fully digital readout as for the trigger system. The compact and lightweight design of the SST-1M camera offers very high performance ideal for gamma-ray observation requirement. In this contribution, the concept, design, performance and status of the first telescope prototype are presented.
△ Less
Submitted 6 October, 2016;
originally announced October 2016.
-
An innovative silicon photomultiplier digitizing camera for gamma-ray astronomy
Authors:
Matthieu Heller,
Enrico Junior Schioppa,
Alessio Porcelli,
Isaac Troyano Pujadas,
Krzysztof Zietara,
Domenico Della Volpe,
Teresa Montaruli,
Franck Cadoux,
Yannick Favre,
Juan Antonio Aguilar Sanchez,
Asen Christov,
Elisa Prandini,
Pawel Rajda,
Mohamed Rameez,
Woijciech Blinik,
Jacek Blocki,
Leszek Bogacz,
Jurek Borkowski,
Tomasz Bulik,
Adam Frankowski,
Mira Grudzinska,
Bartosz Idzkowski,
Mateusz Jamrozy,
Mateusz Janiak,
Jerzy Kasperek
, et al. (22 additional authors not shown)
Abstract:
The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is…
▽ More
The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is not only to build a telescope with excellent performance, but also to design it so that its components can be commissioned, assembled and tested by industry. In this paper we review the basic steps that led to the design concepts for the SST-1M camera and the ongoing realization of the first prototype, with focus on the innovative solutions adopted for the photodetector plane and the readout and trigger parts of the camera. In addition, we report on results of laboratory measurements on real scale elements that validate the camera design and show that it is capable of matching the CTA requirements of operating up to high-moon-light background conditions.
△ Less
Submitted 12 July, 2016;
originally announced July 2016.
-
Prototype of the SST-1M Telescope Structure for the Cherenkov Telescope Array
Authors:
J. Niemiec,
W. Bilnik,
J. Błocki,
L. Bogacz,
J. Borkowski,
T . Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (27 additional authors not shown)
Abstract:
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish diameter of 4 m has been built by a consortium of Polish and Swiss institutions as a prototype for one of the proposed small-size telescopes for the southern observatory of the Cherenkov Telescope Array (CTA). The design represents a very simple, reliable, and cheap solution. The mechanical structure prototype with its drive s…
▽ More
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish diameter of 4 m has been built by a consortium of Polish and Swiss institutions as a prototype for one of the proposed small-size telescopes for the southern observatory of the Cherenkov Telescope Array (CTA). The design represents a very simple, reliable, and cheap solution. The mechanical structure prototype with its drive system is now being tested at the Institute of Nuclear Physics PAS in Krakow. Here we present the design of the prototype and results of the performance tests of the structure and the drive and control system.
△ Less
Submitted 6 September, 2015;
originally announced September 2015.
-
Developments of a new mirror technology for the Cherenkov Telescope Array
Authors:
Jerzy Michałowski,
Michal Dyrda,
Jacek Niemiec,
Maciej Sowiński,
Marek Stodulski
Abstract:
The Cherenkov Telescope Array (CTA) observatory for very high-energy gamma rays will consist of about a hundred of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here we present a novel technology for the production of IACT mirrors that has been developed in the Institute of Nuclear Physics PAS in Krakow, Poland. The mirrors a…
▽ More
The Cherenkov Telescope Array (CTA) observatory for very high-energy gamma rays will consist of about a hundred of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here we present a novel technology for the production of IACT mirrors that has been developed in the Institute of Nuclear Physics PAS in Krakow, Poland. The mirrors are made by cold-slum** of the front reflecting aluminium-coated panel and the rear panel interspaced with aluminium spacers. Each panel is built of two glass panels laminated with a layer of a fibreglass tissue in between for reinforcement of the structure against mechanical damage. The mirror structure is open and does not require a perfect sealing needed in closed-type designs. It prohibits water to be trapped inside and enables a proper ventilation of the mirror. Full-size hexagonal prototype mirrors produced for the medium-sized CTA telescopes will be presented together with the results of recent comprehensive optical and durability tests. Their design will be compared to the earlier technology developed at INP PAS that used a rigid flat open support structure with a reflective layer made by cold-slum** of the coated glass panel to the cast-in-mould spherical epoxy resin layer.
△ Less
Submitted 4 September, 2015;
originally announced September 2015.
-
Using muon rings for the optical throughput calibration of the SST-1M prototype for the Cherenkov Telescope Array
Authors:
S. Toscano,
E. Prandini,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (26 additional authors not shown)
Abstract:
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments devoted to the study of very high energy gamma-rays coming from space. The detection technique consists of observing images created by the Cherenkov light emitted when gamma rays, or more generally cosmic rays, propagate through the atmosphere. While in the case of protons or gamma-rays the images present a filled and mo…
▽ More
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments devoted to the study of very high energy gamma-rays coming from space. The detection technique consists of observing images created by the Cherenkov light emitted when gamma rays, or more generally cosmic rays, propagate through the atmosphere. While in the case of protons or gamma-rays the images present a filled and more or less elongated shape, energetic muons penetrating the atmosphere are visualised as characteristic circular rings or arcs. A relatively simple analysis of the ring images allows the reconstruction of all the relevant parameters of the detected muons, such as the energy, the impact parameter, and the incoming direction, with the final aim to use them to calibrate the total optical throughput of the given IACT telescope. We present the results of preliminary studies on the use of images created by muons as optical throughput calibrators of the single mirror small size telescope prototype SST-1M proposed for the Cherenkov Telescope Array.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
Software design for the control system for Small-Size Telescopes with single-mirror of the Cherenkov Telescope Array
Authors:
A. Porcelli,
W. Bilnik,
J. Błocki,
L. Bogacz,
J. Borkowski,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (28 additional authors not shown)
Abstract:
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton telescope and is among the proposed telescope designs for the Cherenkov Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV) coverage. The SST-1M contains proven technology for the telescope structure and innovative electronics and photosensors for the camera. Its design is meant to be simple, lo…
▽ More
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton telescope and is among the proposed telescope designs for the Cherenkov Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV) coverage. The SST-1M contains proven technology for the telescope structure and innovative electronics and photosensors for the camera. Its design is meant to be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a dedicated industrial standard server. The software is being developed in collaboration with the CTA Medium-Size Telescopes to ensure compatibility and uniformity of the array control. Early operations of the SST-1M prototype will be performed with a subset of the CTA central array control system based on the Alma Common Software (ACS). The triggered event data are time stamped, formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope is described, as well as the interface between the telescope abstraction to the CTA central control and the data acquisition system.
△ Less
Submitted 29 August, 2015;
originally announced August 2015.
-
Development of the optical system for the SST-1M telescope of the Cherenkov Telescope Array observatory
Authors:
K. Seweryn,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Chruślińska,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (36 additional authors not shown)
Abstract:
The prototype of a Davies-Cotton small size telescope (SST-1M) has been designed and developed by a consortium of Polish and Swiss institutions and proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose of the optical system is to focus the Cherenkov light emitted by extensive air showers in the atmosphere onto the focal plane detectors. The main component of the system is…
▽ More
The prototype of a Davies-Cotton small size telescope (SST-1M) has been designed and developed by a consortium of Polish and Swiss institutions and proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose of the optical system is to focus the Cherenkov light emitted by extensive air showers in the atmosphere onto the focal plane detectors. The main component of the system is a dish consisting of 18 hexagonal mirrors with a total effective collection area of 6.47 m2 (including the shadowing and estimated mirror reflectivity). Such a solution was chosen taking into account the analysis of the Cherenkov light propagation and based on optical simulations. The proper curvature and stability of the dish is ensured by the mirror alignment system and the isostatic interface to the telescope structure. Here we present the design of the optical subsystem together with the performance measurements of its components.
△ Less
Submitted 27 August, 2015;
originally announced August 2015.
-
Performance of the SST-1M telescope for the Cherenkov Telescope Array observatory
Authors:
R. Moderski,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Chruślińska,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (29 additional authors not shown)
Abstract:
The single mirror small-size telescope (SST-1M) is one of the telescope projects being proposed for the Cherenkov Telescope Array observatory by a sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure is currently being constructed at the Institute of Nuclear Physics in Cracow, Poland, while the camera will be assembled at the University of Geneva, Switzerland. This proto…
▽ More
The single mirror small-size telescope (SST-1M) is one of the telescope projects being proposed for the Cherenkov Telescope Array observatory by a sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure is currently being constructed at the Institute of Nuclear Physics in Cracow, Poland, while the camera will be assembled at the University of Geneva, Switzerland. This prototype enables measurements of parameters having a decisive influence on the telescope performance. We present results of numerical simulations of the SST-1M performance based on such measurements. The telescope effective area, the expected trigger rates and the optical point spread function are calculated.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
The SST-1M camera for the Cherenkov Telescope Array
Authors:
E. J. Schioppa,
F. Cadoux,
A. Christov,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Porcelli,
M. Rameez,
I. Troyano Pujadas,
W. Bilnik,
J. Blocki,
L. Bogacz,
T. Bulik,
M. Curylo,
M. Dyrda,
A. Frankowski,
L. Grudniki,
M. Grudzinska,
B. Idzkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard
, et al. (26 additional authors not shown)
Abstract:
The prototype camera of the single-mirror Small Size Telescopes (SST-1M) proposed for the Cherenkov Telescope Array (CTA) project has been designed to be very compact and to deliver high performance over thirty years of operation. The camera is composed of an hexagonal photo-detection plane made of custom designed large area hexagonal silicon photomultipliers and a high throughput, highly configur…
▽ More
The prototype camera of the single-mirror Small Size Telescopes (SST-1M) proposed for the Cherenkov Telescope Array (CTA) project has been designed to be very compact and to deliver high performance over thirty years of operation. The camera is composed of an hexagonal photo-detection plane made of custom designed large area hexagonal silicon photomultipliers and a high throughput, highly configurable, fully digital readout and trigger system (DigiCam). The camera will be installed on the telescope structure at the H. Niewodnicza{ń}ski institute of Nuclear Physics in Krakow in fall 2015. In this contribution, we review the steps that led to the development of the innovative photo-detection plane and readout electronics, and we describe the test and calibration strategy adopted.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
Camera calibration strategy of the SST-1M prototype of the Cherenokov Telescope Array
Authors:
E. Prandini,
M. Heller,
E. Lyard,
E. jr. Schioppa,
A. Neronov,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Mach,
D. Mandat
, et al. (26 additional authors not shown)
Abstract:
The SST-1M telescope is one of the prototypes under construction proposed to be part of the future Cherenkov Telescope Array. It uses a standard Davis-Cotton design for the optics and telescope structure, with a dish diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296 pixels including entrance window, light co…
▽ More
The SST-1M telescope is one of the prototypes under construction proposed to be part of the future Cherenkov Telescope Array. It uses a standard Davis-Cotton design for the optics and telescope structure, with a dish diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296 pixels including entrance window, light concentrators, Silicon Photomultipliers (SiPMs), and pre-amplifier stages together with a fully digital readout and trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain designed for the SST-1M prototype. In particular we focus on the calibration strategy used to convert the SiPM signals registered by DigiCam to the quantities needed for Cherenkov image analysis. The calibration is based on an online feedback system to stabilize the gain of the SiPMs, as well as dedicated events (dark count, pedestal, and light flasher events) to be taken during the normal operation of the prototype.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the SST-1M Telescope proposed for the Cherenkov Telescope Array
Authors:
P. Rajda,
K. Ziętara,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (26 additional authors not shown)
Abstract:
The SST-1M is one of three prototype small-sized telescope designs proposed for the Cherenkov Telescope Array, and is built by a consortium of Polish and Swiss institutions. The SST-1M will operate with DigiCam - an innovative, compact camera with fully digital read-out and trigger electronics. A high level of integration will be achieved by massively deploying state-of-the-art multi-gigabit trans…
▽ More
The SST-1M is one of three prototype small-sized telescope designs proposed for the Cherenkov Telescope Array, and is built by a consortium of Polish and Swiss institutions. The SST-1M will operate with DigiCam - an innovative, compact camera with fully digital read-out and trigger electronics. A high level of integration will be achieved by massively deploying state-of-the-art multi-gigabit transmission channels, beginning from the ADC flash converters, through the internal data and trigger signals transmission over backplanes and cables, to the camera's server link. Such an approach makes it possible to design the camera to fit the size and weight requirements of the SST-1M exactly, and provide low power consumption, high reliability and long lifetime. The structure of the digital electronics will be presented, along with main physical building blocks and the internal architecture of FPGA functional subsystems.
△ Less
Submitted 25 August, 2015;
originally announced August 2015.
-
CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio
, et al. (1290 additional authors not shown)
Abstract:
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
△ Less
Submitted 11 September, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
Status of the technologies for the production of the Cherenkov Telescope Array (CTA) mirrors
Authors:
G. Pareschi,
T. Armstrong,
H. Baba,
J. Bähr,
A. Bonardi,
G. Bonnoli,
P. Brun,
R. Canestrari,
P. Chadwick,
M. Chikawa,
P. -H. Carton,
V. de Souza,
J. Dipold,
M. Doro,
D. Durand,
M. Dyrda,
A. Förster,
M. Garczarczyk,
E. Giro,
J. -F. Glicenstein,
Y. Hanabata,
M. Hayashida,
M. Hrabovski,
C. Jeanney,
M. Kagaya
, et al. (32 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The total reflective surface could be up to 10,000 m2…
▽ More
The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The total reflective surface could be up to 10,000 m2 requiring unprecedented technological efforts. The properties of the reflector directly influence the telescope performance and thus constitute a fundamental ingredient to improve and maintain the sensitivity. The R&D status of lightweight, reliable and cost-effective mirror facets for the CTA telescope reflectors for the different classes of telescopes is reviewed in this paper.
△ Less
Submitted 7 October, 2013;
originally announced October 2013.
-
The Formation of Condensation on Cherenkov Telescope Mirrors
Authors:
P. M. Chadwick,
S. A. Cleaver,
M. Dyrda,
A. Förster,
J. Michalowski,
J. Niemiec,
C. Schultz,
M. Stodulski
Abstract:
The mirrors of imaging atmospheric Cherenkov telescopes are different from those of conventional astronomical telescopes in several ways, not least in that they are exposed to the elements. One of the issues which may arise is condensation forming on the mirrors during observing under certain atmospheric conditions, which has important consequences for the operation of the telescopes. This contrib…
▽ More
The mirrors of imaging atmospheric Cherenkov telescopes are different from those of conventional astronomical telescopes in several ways, not least in that they are exposed to the elements. One of the issues which may arise is condensation forming on the mirrors during observing under certain atmospheric conditions, which has important consequences for the operation of the telescopes. This contribution discusses why telescope mirrors suffer condensation and describes the atmospheric conditions and mirror designs which are likely to be problematic.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Mirror Development for the Cherenkov Telescope Array
Authors:
A. Förster,
T. Armstrong,
H. Baba,
J. Bähr,
A. Bonardi,
G. Bonnoli,
P. Brun,
R. Canestrari,
P. Chadwick,
M. Chikawa,
P. -H. Carton,
V. De Souza,
J. Dipold,
M. Doro,
D. Durand,
M. Dyrda,
E. Giro,
J. -F. Glicenstein,
Y. Hanabata,
M. Hayashida,
M. Hrabovski,
C. Jeanney,
M. Kagaya,
H. Katagiri,
L. Lessio
, et al. (31 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high energy gamma-ray astronomy. It will consist of several tens of telescopes of different sizes, with a total mirror area of up to 10,000 square meters. Most mirrors of current installations are either polished glass mirrors or diamond-turned aluminium mirrors, both labour intensive technologies. For CTA, several new technolog…
▽ More
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high energy gamma-ray astronomy. It will consist of several tens of telescopes of different sizes, with a total mirror area of up to 10,000 square meters. Most mirrors of current installations are either polished glass mirrors or diamond-turned aluminium mirrors, both labour intensive technologies. For CTA, several new technologies for a fast and cost-efficient production of light-weight and reliable mirror substrates have been developed and industrial pre-production has started for most of them. In addition, new or improved aluminium-based and dielectric surface coatings have been developed to increase the reflectance over the lifetime of the mirrors compared to those of current Cherenkov telescope instruments.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
Open-structure composite mirrors for the Cherenkov Telescope Array
Authors:
Michal Dyrda,
Jerzy Michalowski,
Jacek Niemiec,
Marek Stodulski
Abstract:
The Cherenkov Telescope Array (CTA) Observatory for high-energy gamma-ray astronomy will comprise several tens of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here we present a new technology for the production of IACT mirrors that has been developed in the Institute of Nuclear Physics PAS in Krakow, Poland. An open-structur…
▽ More
The Cherenkov Telescope Array (CTA) Observatory for high-energy gamma-ray astronomy will comprise several tens of imaging atmospheric Cherenkov telescopes (IACTs) of different size with a total reflective area of about 10,000 m$^2$. Here we present a new technology for the production of IACT mirrors that has been developed in the Institute of Nuclear Physics PAS in Krakow, Poland. An open-structure composite mirror consists of a rigid flat sandwich support structure and cast-in-mould spherical epoxy resin layer. To this layer a thin glass sheet complete with optical coating is cold-slumped to provide the spherical reflective layer of the mirror. The main components of the sandwich support structure are two flat float glass panels inter spaced with V-shape aluminum spacers of equal length. The sandwich support structure is open, thus enabling good cooling and ventilation of the mirror. A special arrangement of the aluminum spacers also prohibits water being trapped inside. The open-structure technology thus represents a novel cost-efficient approach that does not require the perfect sealing needed in closed-type mirrors. In addition, the technology enables the application of a dielectric coating. Full-size prototype mirrors designed for the medium-size CTA telescope will be presented together with the results of recent optical tests.
△ Less
Submitted 16 July, 2013;
originally announced July 2013.
-
Single-Mirror Small-Size Telescope structure for the Cherenkov Telescope Array
Authors:
Jacek Niemiec,
Jerzy Michałowski,
Michał Dyrda,
Wojciech Kochański,
Jaromir Ludwin,
Marek Stodulski,
Paweł Ziółkowski,
Paweł Żychowski
Abstract:
A single-mirror small-size (1M-SST) Davies-Cotton telescope has been proposed for the southern observatory of the Cherenkov Telescope Array (CTA) by a consortium of scientific institutions from Poland, Switzerland, and Germany. The telescope has a 4 m diameter reflector and will be equipped with a fully digital camera based on Geiger avalanche photodiodes (APDs). Such a design is particularly inte…
▽ More
A single-mirror small-size (1M-SST) Davies-Cotton telescope has been proposed for the southern observatory of the Cherenkov Telescope Array (CTA) by a consortium of scientific institutions from Poland, Switzerland, and Germany. The telescope has a 4 m diameter reflector and will be equipped with a fully digital camera based on Geiger avalanche photodiodes (APDs). Such a design is particularly interesting for CTA because it represents a very simple, reliable, and cheap solution for a SST. Here we present the design and the characteristics of the mechanical structure of the 1M-SST telescope and its drive system. We also discuss the results of a finite element method analysis in order to demonstrate the conformance of the design with the CTA specifications and scientific objectives. In addition, we report on the current status of the construction of a prototype telescope structure at the Institute of Nuclear Physics PAS in Krakow.
△ Less
Submitted 16 July, 2013;
originally announced July 2013.
-
4 m Davies-Cotton telescope for the Cherenkov Telescope Array
Authors:
R. Moderski,
J. A. Aguilar,
A. Barnacka,
A. Basili,
V. Boccone,
L. Bogacz,
F. Cadoux,
A. Christov,
M. Della Volpe,
M. Dyrda,
A. Frankowski,
M. Grudzińska,
M. Janiak,
M. Karczewski,
J. Kasperek,
W. Kochański,
P. Korohoda,
J. Kozioł,
P. Lubiński,
J. Ludwin,
E. Lyard,
A. Marszałek,
J. Michałowski,
T. Montaruli,
J. Nicolau-Kukliński
, et al. (17 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is the next generation very high energy gamma-ray observatory. It will consist of three classes of telescopes, of large, medium and small sizes. The small telescopes, of 4 m diameter, will be dedicated to the observations of the highest energy gamma-rays, above several TeV. We present the technical characteristics of a single mirror, 4 m diameter, Davies-Cotton…
▽ More
The Cherenkov Telescope Array (CTA) is the next generation very high energy gamma-ray observatory. It will consist of three classes of telescopes, of large, medium and small sizes. The small telescopes, of 4 m diameter, will be dedicated to the observations of the highest energy gamma-rays, above several TeV. We present the technical characteristics of a single mirror, 4 m diameter, Davies-Cotton telescope for the CTA and the performance of the sub-array consisting of the telescopes of this type. The telescope will be equipped with a fully digital camera based on custom made, hexagonal Geiger-mode avalanche photodiodes. The development of cameras based on such devices is an RnD since traditionally photomultipliers are used. The photodiodes are now being characterized at various institutions of the CTA Consortium. Glass mirrors will be used, although an alternative is being considered: composite mirrors that could be adopted if they meet the project requirements. We present a design of the telescope structure, its components and results of the numerical simulations of the telescope performance.
△ Less
Submitted 11 July, 2013;
originally announced July 2013.
-
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Authors:
The CTA Consortium,
:,
O. Abril,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
M. Ajello,
A. Akhperjanian,
M. Alcubierre,
J. Aleksic,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
E. Amato,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
E. O. Angüner,
L. A. Antonelli,
V. Antonuccio
, et al. (1082 additional authors not shown)
Abstract:
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
△ Less
Submitted 29 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
The T2K Side Muon Range Detector
Authors:
S. Aoki,
G. Barr,
M. Batkiewicz,
J. Błocki,
J. D. Brinson,
W. Coleman,
A. Daιbrowska,
I. Danko,
M. Dziewiecki,
B. Ellison,
L. Golyshkin,
R. Gould,
T. Hara,
J. Haremza,
B. Hartfiel,
J. Holeczek,
A. Izmaylov,
M. Khabibullin,
A. Khotjantsev,
D. Kiełczewska,
A. Kilinski,
J. Kisiel,
Y. Kudenko,
N. Kulkarni,
R. Kurjata
, et al. (42 additional authors not shown)
Abstract:
The T2K experiment is a long baseline neutrino oscillation experiment aiming to observe the appearance of ν e in a νμ beam. The νμ beam is produced at the Japan Proton Accelerator Research Complex (J-PARC), observed with the 295 km distant Super- Kamiokande Detector and monitored by a suite of near detectors at 280m from the proton target. The near detectors include a magnetized off-axis detector…
▽ More
The T2K experiment is a long baseline neutrino oscillation experiment aiming to observe the appearance of ν e in a νμ beam. The νμ beam is produced at the Japan Proton Accelerator Research Complex (J-PARC), observed with the 295 km distant Super- Kamiokande Detector and monitored by a suite of near detectors at 280m from the proton target. The near detectors include a magnetized off-axis detector (ND280) which measures the un-oscillated neutrino flux and neutrino cross sections. The present paper describes the outermost component of ND280 which is a side muon range detector (SMRD) composed of scintillation counters with embedded wavelength shifting fibers and Multi-Pixel Photon Counter read-out. The components, performance and response of the SMRD are presented.
△ Less
Submitted 25 June, 2012; v1 submitted 15 June, 2012;
originally announced June 2012.
-
First Muon-Neutrino Disappearance Study with an Off-Axis Beam
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
Y. Ajima,
H. Aihara,
J. B. Albert,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
D. Autiero,
A. Badertscher,
M. Barbi,
G. J. Barker,
G. Barr,
M. Bass,
M. Batkiewicz,
F. Bay,
S. Bentham,
V. Berardi
, et al. (422 additional authors not shown)
Abstract:
We report a measurement of muon-neutrino disappearance in the T2K experiment. The 295-km muon-neutrino beam from Tokai to Kamioka is the first implementation of the off-axis technique in a long-baseline neutrino oscillation experiment. With data corresponding to 1.43 10**20 protons on target, we observe 31 fully-contained single muon-like ring events in Super-Kamiokande, compared with an expectati…
▽ More
We report a measurement of muon-neutrino disappearance in the T2K experiment. The 295-km muon-neutrino beam from Tokai to Kamioka is the first implementation of the off-axis technique in a long-baseline neutrino oscillation experiment. With data corresponding to 1.43 10**20 protons on target, we observe 31 fully-contained single muon-like ring events in Super-Kamiokande, compared with an expectation of 104 +- 14 (syst) events without neutrino oscillations. The best-fit point for two-flavor nu_mu -> nu_tau oscillations is sin**2(2 theta_23) = 0.98 and |Δm**2_32| = 2.65 10**-3 eV**2. The boundary of the 90 % confidence region includes the points (sin**2(2 theta_23),|Δm**2_32|) = (1.0, 3.1 10**-3 eV**2), (0.84, 2.65 10**-3 eV**2) and (1.0, 2.2 10**-3 eV**2).
△ Less
Submitted 6 January, 2012;
originally announced January 2012.
-
Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector
Authors:
K. Abe,
N. Abgrall,
Y. Ajima,
H. Aihara,
J. B. Albert,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
D. Autiero,
A. Badertscher,
M. Barbi,
G. J. Barker,
G. Barr,
M. Bass,
M. Batkiewicz,
F. Bay,
S. Bentham,
V. Berardi,
B. E. Berger
, et al. (407 additional authors not shown)
Abstract:
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o…
▽ More
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision.
△ Less
Submitted 14 November, 2011;
originally announced November 2011.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Phobos results on charged particle multiplicity and pseudorapidity distributions in Au+Au, Cu+Cu, d+Au, and p+p collisions at ultra-relativistic energies
Authors:
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
A. Budzanowski,
W. Busza,
A. Carroll,
Z. Chai,
V. Chetluru,
M. P. Decowski,
E. Garcıa,
T. Gburek,
N. George,
K. Gulbrandsen,
S. Gushue,
C. Halliwell,
J. Hamblen,
G. A. Heintzelman,
C. Henderson,
D. J. Hofman,
R. S. Hollis
, et al. (54 additional authors not shown)
Abstract:
Pseudorapidity distributions of charged particles emitted in $Au+Au$, $Cu+Cu$, $d+Au$, and $p+p$ collisions over a wide energy range have been measured using the PHOBOS detector at RHIC. The centrality dependence of both the charged particle distributions and the multiplicity at midrapidity were measured. Pseudorapidity distributions of charged particles emitted with $|η|<5.4$, which account for b…
▽ More
Pseudorapidity distributions of charged particles emitted in $Au+Au$, $Cu+Cu$, $d+Au$, and $p+p$ collisions over a wide energy range have been measured using the PHOBOS detector at RHIC. The centrality dependence of both the charged particle distributions and the multiplicity at midrapidity were measured. Pseudorapidity distributions of charged particles emitted with $|η|<5.4$, which account for between 95% and 99% of the total charged-particle emission associated with collision participants, are presented for different collision centralities. Both the midrapidity density, $dN_{ch}/dη$, and the total charged-particle multiplicity, $N_{ch}$, are found to factorize into a product of independent functions of collision energy, $\sqrt{s_{_{NN}}}$, and centrality given in terms of the number of nucleons participating in the collision, $N_{part}$. The total charged particle multiplicity, observed in these experiments and those at lower energies, assumes a linear dependence of $(\ln s_{_{NN}})^2$ over the full range of collision energy of $\sqrt{s_{_{NN}}}$=2.7-200 GeV.
△ Less
Submitted 8 November, 2010;
originally announced November 2010.
-
Scintillator counters with WLS fiber/MPPC readout for the side muon range detector (SMRD)of the T2K experiment
Authors:
A. Izmaylov,
S. Aoki,
J. Blocki,
J. Brinson,
A. Dabrowska,
I. Danko,
M. Dziewiecki,
B. Ellison,
L. Golyshkin,
R. Gould,
T. Hara,
B. Hartfiel,
J. Holeczek,
M. Khabibullin,
A. Khotjantsev,
D. Kielczewska,
J. Kisiel,
T. Kozlowski,
Yu. Kudenko,
R. Kurjata,
T. Kutter,
J. Lagoda,
J. Liu,
J. Marzec,
W. Metcalf
, et al. (30 additional authors not shown)
Abstract:
The T2K neutrino experiment at J-PARC uses a set of near detectors to measure the properties of an unoscillated neutrino beam and neutrino interaction cross-sections. One of the sub-detectors of the near-detector complex, the side muon range detector (SMRD), is described in the paper. The detector is designed to help measure the neutrino energy spectrum, to identify background and to calibrate t…
▽ More
The T2K neutrino experiment at J-PARC uses a set of near detectors to measure the properties of an unoscillated neutrino beam and neutrino interaction cross-sections. One of the sub-detectors of the near-detector complex, the side muon range detector (SMRD), is described in the paper. The detector is designed to help measure the neutrino energy spectrum, to identify background and to calibrate the other detectors. The active elements of the SMRD consist of 0.7 cm thick extruded scintillator slabs inserted into air gaps of the UA1 magnet yokes. The readout of each scintillator slab is provided through a single WLS fiber embedded into a serpentine shaped groove. Two Hamamatsu multi-pixel avalanche photodiodes (MPPC's) are coupled to both ends of the WLS fiber. This design allows us to achieve a high MIP detection efficiency of greater than 99%. A light yield of 25-50 p.e./MIP, a time resolution of about 1 ns and a spatial resolution along the slab better than 10 cm were obtained for the SMRD counters.
△ Less
Submitted 29 April, 2009;
originally announced April 2009.
