-
An Upper Limit on the Photoproduction Cross Section of the Spin-Exotic $π_1(1600)$
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction c…
▽ More
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction cross sections of the $π^{0}_{1}(1600)$ and $π^{-}_{1}(1600)$. We combine these limits with lattice calculations of decay widths and find that photoproduction of $η'π$ is the most sensitive two-body system to search for the $π_1(1600)$.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Measurement of Spin-Density Matrix Elements in $Δ^{++}(1232)$ photoproduction
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
We report the measurement of spin-density matrix elements of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement used a linearly polarized photon beam with $E_γ=8.2-8.8$~GeV and the statistical precision exceeds the previous measurement from SLAC by three orders of magnitude for the momentum transfer squa…
▽ More
We report the measurement of spin-density matrix elements of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement used a linearly polarized photon beam with $E_γ=8.2-8.8$~GeV and the statistical precision exceeds the previous measurement from SLAC by three orders of magnitude for the momentum transfer squared region $-t < 1.4$ GeV$^2$. The data are sensitive to the previously undetermined relative sign between couplings in existing Regge exchange models. Linear combinations of the extracted SDMEs allow for a decomposition into natural and unnatural exchange amplitudes, which shows that the unnatural exchange plays an important role in the low $-t$ region.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab
Authors:
A. Accardi,
P. Achenbach,
D. Adhikari,
A. Afanasev,
C. S. Akondi,
N. Akopov,
M. Albaladejo,
H. Albataineh,
M. Albrecht,
B. Almeida-Zamora,
M. Amaryan,
D. Androić,
W. Armstrong,
D. S. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
A. Austregesilo,
H. Avagyan,
T. Averett,
C. Ayerbe Gayoso,
A. Bacchetta,
A. B. Balantekin,
N. Baltzell,
L. Barion
, et al. (419 additional authors not shown)
Abstract:
This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron…
▽ More
This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron beams, CEBAF's potential for a higher energy upgrade presents a unique opportunity for an innovative nuclear physics program, which seamlessly integrates a rich historical background with a promising future. The proposed physics program encompass a diverse range of investigations centered around the nonperturbative dynamics inherent in hadron structure and the exploration of strongly interacting systems. It builds upon the exceptional capabilities of CEBAF in high-luminosity operations, the availability of existing or planned Hall equipment, and recent advancements in accelerator technology. The proposed program cover various scientific topics, including Hadron Spectroscopy, Partonic Structure and Spin, Hadronization and Transverse Momentum, Spatial Structure, Mechanical Properties, Form Factors and Emergent Hadron Mass, Hadron-Quark Transition, and Nuclear Dynamics at Extreme Conditions, as well as QCD Confinement and Fundamental Symmetries. Each topic highlights the key measurements achievable at a 22 GeV CEBAF accelerator. Furthermore, this document outlines the significant physics outcomes and unique aspects of these programs that distinguish them from other existing or planned facilities. In summary, this document provides an exciting rationale for the energy upgrade of CEBAF to 22 GeV, outlining the transformative scientific potential that lies within reach, and the remarkable opportunities it offers for advancing our understanding of hadron physics and related fundamental phenomena.
△ Less
Submitted 24 August, 2023; v1 submitted 13 June, 2023;
originally announced June 2023.
-
Measurement of Spin-Density Matrix Elements in $ρ(770)$ Production with a Linearly Polarized Photon Beam at $E_γ= 8.2\,-\,8.8\,\text{GeV}$
Authors:
S. Adhikari,
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
D. Byer,
E. Chudakov,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (127 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons im**ing on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved e…
▽ More
The GlueX experiment at Jefferson Lab studies photoproduction of mesons using linearly polarized $8.5\,\text{GeV}$ photons im**ing on a hydrogen target which is contained within a detector with near-complete coverage for charged and neutral particles. We present measurements of spin-density matrix elements for the photoproduction of the vector meson $ρ$(770). The statistical precision achieved exceeds that of previous experiments for polarized photoproduction in this energy range by orders of magnitude. We confirm a high degree of $s$-channel helicity conservation at small squared four-momentum transfer $t$ and are able to extract the $t$-dependence of natural and unnatural-parity exchange contributions to the production process in detail. We confirm the dominance of natural-parity exchange over the full $t$ range. We also find that helicity amplitudes in which the helicity of the incident photon and the photoproduced $ρ(770)$ differ by two units are negligible for $-t<0.5\,\text{GeV}^{2}/c^{2}$.
△ Less
Submitted 17 November, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
Measurement of the J/$ψ$ photoproduction cross section over the full near-threshold kinematic region
Authors:
S. Adhikari,
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
D. Byer,
E. Chudakov,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (127 additional authors not shown)
Abstract:
We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region.…
▽ More
We report the total and differential cross sections for $J/ψ$ photoproduction with the large acceptance GlueX spectrometer for photon beam energies from the threshold at 8.2~GeV up to 11.44~GeV and over the full kinematic range of momentum transfer squared, $t$. Such coverage facilitates the extrapolation of the differential cross sections to the forward ($t = 0$) point beyond the physical region. The forward cross section is used by many theoretical models and plays an important role in understanding $J/ψ$ photoproduction and its relation to the $J/ψ-$proton interaction. These measurements of $J/ψ$ photoproduction near threshold are also crucial inputs to theoretical models that are used to study important aspects of the gluon structure of the proton, such as the gluon Generalized Parton Distribution (GPD) of the proton, the mass radius of the proton, and the trace anomaly contribution to the proton mass. We observe possible structures in the total cross section energy dependence and find evidence for contributions beyond gluon exchange in the differential cross section close to threshold, both of which are consistent with contributions from open-charm intermediate states.
△ Less
Submitted 8 June, 2023; v1 submitted 7 April, 2023;
originally announced April 2023.
-
X-Former: In-Memory Acceleration of Transformers
Authors:
Shrihari Sridharan,
Jacob R. Stevens,
Kaushik Roy,
Anand Raghunathan
Abstract:
Transformers have achieved great success in a wide variety of natural language processing (NLP) tasks due to the attention mechanism, which assigns an importance score for every word relative to other words in a sequence. However, these models are very large, often reaching hundreds of billions of parameters, and therefore require a large number of DRAM accesses. Hence, traditional deep neural net…
▽ More
Transformers have achieved great success in a wide variety of natural language processing (NLP) tasks due to the attention mechanism, which assigns an importance score for every word relative to other words in a sequence. However, these models are very large, often reaching hundreds of billions of parameters, and therefore require a large number of DRAM accesses. Hence, traditional deep neural network (DNN) accelerators such as GPUs and TPUs face limitations in processing Transformers efficiently. In-memory accelerators based on non-volatile memory promise to be an effective solution to this challenge, since they provide high storage density while performing massively parallel matrix vector multiplications within memory arrays. However, attention score computations, which are frequently used in Transformers (unlike CNNs and RNNs), require matrix vector multiplications (MVM) where both operands change dynamically for each input. As a result, conventional NVM-based accelerators incur high write latency and write energy when used for Transformers, and further suffer from the low endurance of most NVM technologies. To address these challenges, we present X-Former, a hybrid in-memory hardware accelerator that consists of both NVM and CMOS processing elements to execute transformer workloads efficiently. To improve the hardware utilization of X-Former, we also propose a sequence blocking dataflow, which overlaps the computations of the two processing elements and reduces execution time. Across several benchmarks, we show that X-Former achieves upto 85x and 7.5x improvements in latency and energy over a NVIDIA GeForce GTX 1060 GPU and upto 10.7x and 4.6x improvements in latency and energy over a state-of-the-art in-memory NVM accelerator.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
The Present and Future of QCD
Authors:
P. Achenbach,
D. Adhikari,
A. Afanasev,
F. Afzal,
C. A. Aidala,
A. Al-bataineh,
D. K. Almaalol,
M. Amaryan,
D. Androić,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
E. C. Aschenauer,
H. Atac,
H. Avakian,
T. Averett,
C. Ayerbe Gayoso,
X. Bai,
K. N. Barish,
N. Barnea,
G. Basar,
M. Battaglieri,
A. A. Baty,
I. Bautista
, et al. (378 additional authors not shown)
Abstract:
This White Paper presents the community inputs and scientific conclusions from the Hot and Cold QCD Town Meeting that took place September 23-25, 2022 at MIT, as part of the Nuclear Science Advisory Committee (NSAC) 2023 Long Range Planning process. A total of 424 physicists registered for the meeting. The meeting highlighted progress in Quantum Chromodynamics (QCD) nuclear physics since the 2015…
▽ More
This White Paper presents the community inputs and scientific conclusions from the Hot and Cold QCD Town Meeting that took place September 23-25, 2022 at MIT, as part of the Nuclear Science Advisory Committee (NSAC) 2023 Long Range Planning process. A total of 424 physicists registered for the meeting. The meeting highlighted progress in Quantum Chromodynamics (QCD) nuclear physics since the 2015 LRP (LRP15) and identified key questions and plausible paths to obtaining answers to those questions, defining priorities for our research over the coming decade. In defining the priority of outstanding physics opportunities for the future, both prospects for the short (~ 5 years) and longer term (5-10 years and beyond) are identified together with the facilities, personnel and other resources needed to maximize the discovery potential and maintain United States leadership in QCD physics worldwide. This White Paper is organized as follows: In the Executive Summary, we detail the Recommendations and Initiatives that were presented and discussed at the Town Meeting, and their supporting rationales. Section 2 highlights major progress and accomplishments of the past seven years. It is followed, in Section 3, by an overview of the physics opportunities for the immediate future, and in relation with the next QCD frontier: the EIC. Section 4 provides an overview of the physics motivations and goals associated with the EIC. Section 5 is devoted to the workforce development and support of diversity, equity and inclusion. This is followed by a dedicated section on computing in Section 6. Section 7 describes the national need for nuclear data science and the relevance to QCD research.
△ Less
Submitted 4 March, 2023;
originally announced March 2023.
-
G4CMP: Condensed Matter Physics Simulation Using the Geant4 Toolkit
Authors:
M. H. Kelsey,
R. Agnese,
Y. F. Alam,
I. Ataee Langroudy,
E. Azadbakht,
D. Brandt,
R. Bunker,
B. Cabrera,
Y. -Y. Chang,
H. Coombes,
R. M. Cormier,
M. D. Diamond,
E. R. Edwards,
E. Figueroa-Feliciano,
J. Gao,
P. M. Harrington,
Z. Hong,
M. Hui,
N. A. Kurinsky,
R. E. Lawrence,
B. Loer,
M. G. Masten,
E. Michaud,
E. Michielin,
J. Miller
, et al. (22 additional authors not shown)
Abstract:
G4CMP simulates phonon and charge transport in cryogenic semiconductor crystals using the Geant4 toolkit. The transport code is capable of simulating the propagation of acoustic phonons as well as electron and hole charge carriers. Processes for anisotropic phonon propagation, oblique charge-carrier propagation, and phonon emission by accelerated charge carriers are included. The simulation reprod…
▽ More
G4CMP simulates phonon and charge transport in cryogenic semiconductor crystals using the Geant4 toolkit. The transport code is capable of simulating the propagation of acoustic phonons as well as electron and hole charge carriers. Processes for anisotropic phonon propagation, oblique charge-carrier propagation, and phonon emission by accelerated charge carriers are included. The simulation reproduces theoretical predictions and experimental observations such as phonon caustics, heat-pulse propagation times, and mean charge-carrier drift velocities. In addition to presenting the physics and features supported by G4CMP, this report outlines example applications from the dark matter and quantum information science communities. These communities are applying G4CMP to model and design devices for which the energy transported by phonons and charge carriers is germane to the performance of superconducting instruments and circuits placed on silicon and germanium substrates. The G4CMP package is available to download from GitHub: github.com/kelseymh/G4CMP.
△ Less
Submitted 12 February, 2023;
originally announced February 2023.
-
Wide Field High Cadence CMB Survey Designs for Chilean Telescopes
Authors:
Haruki Ebina,
Reijo Keskitalo,
Julian Borrill,
Steve K. Choi,
Theodore Kisner,
Sigurd Naess,
Michael Niemack,
Jason R. Stevens
Abstract:
We present new wide field survey strategies for Chilean Large Aperture Telescopes (LAT) measuring the Cosmic Microwave Background (CMB), which we call Sinusoidal Modulated High Cadence Survey Strategies. The strategies were developed during the process of optimizing LAT measurements for the CMB-S4, Simons Observatory, and CCAT-prime collaborations. Observing more than $f_{sky} \sim 0.5$, the teles…
▽ More
We present new wide field survey strategies for Chilean Large Aperture Telescopes (LAT) measuring the Cosmic Microwave Background (CMB), which we call Sinusoidal Modulated High Cadence Survey Strategies. The strategies were developed during the process of optimizing LAT measurements for the CMB-S4, Simons Observatory, and CCAT-prime collaborations. Observing more than $f_{sky} \sim 0.5$, the telescope consistently achieves high observation efficiency, even with Sun-avoidance enabled. Classical azimuthal scan survey strategies observing fields of equal size suffer from problems of observation depth non-uniformity relative to declination and lack of crosslinking. The new survey strategies described here significantly improve both uniformity and crosslinking while also enabling higher cadence observations for time-domain astrophysics. Uniformity and crosslinking are improved by modulation of azimuthal angular velocity and sinusoidal elevation nods, respectively. In particular, there is nearly uniform observation depth and crosslinking is improved from total lack of crosslinking near -40 degree declination to clearing the strictest thresholds for crosslinking across the entire field. The simulated strategies are compared to the strategies used for the Atacama Cosmology Telescope and previously studied Simons Observatory survey strategies.
△ Less
Submitted 13 September, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Accessing DEMP and DVCS at Backward Angles above the Resonance Region
Authors:
W. B. Li,
J. R. Stevens,
G. M. Huber
Abstract:
The proposed measurement is a dedicated study to investigate the exclusive electroproduction process: 1H(e, e'p)X, in the backward angle above the resonance region. Here, the produced particle X (pi0 or gamma) is emitted 180 degrees opposite to the virtual photon momentum. This study will apply the well-known L/T separation method of the electroproduction process to this unexplored backward angle…
▽ More
The proposed measurement is a dedicated study to investigate the exclusive electroproduction process: 1H(e, e'p)X, in the backward angle above the resonance region. Here, the produced particle X (pi0 or gamma) is emitted 180 degrees opposite to the virtual photon momentum. This study will apply the well-known L/T separation method of the electroproduction process to this unexplored backward angle kinematics region. The available theoretical frameworks give parallel interpretations to the backward angle meson production at the proposed kinematics. According to the QCD GPD-like TDA model, backward meson production as the virtual-photon probes the transverse meson cloud structure inside of the nucleon; whereas the hadronic Regge based model describes backward meson production as the interference between nucleon exchange and the meson produced via re-scattering of the nucleon. Testing these two approaches is like testing the onset of quarks and gluon physics, i.e. going deeper into the structure of nucleon to probe its quark and gluon content. Combining knowledge from both frameworks has the potential to provide complementary knowledge to the forward angle physics programs and obtain new physics insights to study the QCD transition from meson-nucleon to quark-hadron degrees of freedom.
△ Less
Submitted 27 May, 2022; v1 submitted 23 May, 2022;
originally announced May 2022.
-
Initial performance of the GlueX DIRC detector
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
E. Ihloff,
G. Kalicy,
J. Kelsey,
W. B. Li,
M. Patsyuk,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region…
▽ More
The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region ($θ<11^{\circ}$), which will allow the study of hybrid mesons decaying into kaon final states with significantly higher efficiency and purity. The new PID system is constructed with radiators from the decommissioned BaBar DIRC counter, combined with new compact photon cameras based on the SuperB FDIRC concept. The full system was successfully installed and commissioned with beam during 2019/2020. The initial PID performance of the system was evaluated and compared to one from Geant4 simulation.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Search for photoproduction of axion-like particles at GlueX
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
M. Albrecht,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
E. Chudakov,
S. Cole,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (120 additional authors not shown)
Abstract:
We present a search for axion-like particles, $a$, produced in photon-proton collisions at a center-of-mass energy of approximately 4 GeV, focusing on the scenario where the $a$-gluon coupling is dominant. The search uses $a\toγγ$ and $a\toπ^+π^-π^0$ decays, and a data sample corresponding to an integrated luminosity of 168 pb$^{-1}$ collected with the GlueX detector. The search for $a\toγγ$ decay…
▽ More
We present a search for axion-like particles, $a$, produced in photon-proton collisions at a center-of-mass energy of approximately 4 GeV, focusing on the scenario where the $a$-gluon coupling is dominant. The search uses $a\toγγ$ and $a\toπ^+π^-π^0$ decays, and a data sample corresponding to an integrated luminosity of 168 pb$^{-1}$ collected with the GlueX detector. The search for $a\toγγ$ decays is performed in the mass range of $180 < m_a < 480$ MeV, while the search for $a\toπ^+π^-π^0$ decays explores the $600 < m_a < 720$ MeV region. No evidence for a signal is found, and 90% confidence-level exclusion limits are placed on the $a$-gluon coupling strength. These constraints are the most stringent to date over much of the mass ranges considered.
△ Less
Submitted 24 March, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Measurement of Spin Density Matrix Elements in $Λ(1520)$ Photoproduction at 8.2-8.8 GeV
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
M. Albrecht,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
E. Chudakov,
S. Cole,
P. L. Cole,
O. Cortes,
V. Crede
, et al. (121 additional authors not shown)
Abstract:
We report on the measurement of spin density matrix elements of the $Λ(1520)$ in the photoproduction reaction $γp\rightarrow Λ(1520)K^+$, via its subsequent decay to $K^{-}p$. The measurement was performed as part of the GlueX experimental program in Hall D at Jefferson Lab using a linearly polarized photon beam with $E_γ=$ 8.2-8.8 GeV. These are the first such measurements in this photon energy r…
▽ More
We report on the measurement of spin density matrix elements of the $Λ(1520)$ in the photoproduction reaction $γp\rightarrow Λ(1520)K^+$, via its subsequent decay to $K^{-}p$. The measurement was performed as part of the GlueX experimental program in Hall D at Jefferson Lab using a linearly polarized photon beam with $E_γ=$ 8.2-8.8 GeV. These are the first such measurements in this photon energy range. Results are presented in bins of momentum transfer squared, $-(t-t_\text{0})$. We compare the results with a Reggeon exchange model and determine that natural exchange amplitudes are dominant in $Λ(1520)$ photoproduction.
△ Less
Submitted 3 March, 2022; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Progress and Opportunities in Backward angle (u-channel) Physics
Authors:
C. Ayerbe Gayoso,
Ł. Bibrzycki,
S. Diehl,
S. Heppelmann,
D. W. Higinbotham,
G. M. Huber,
S. J. D. Kay,
S. R. Klein,
J. M. Laget,
W. B. Li,
V. Mathieu,
K. Park,
R. J. Perry,
B. Pire,
K. Semenov-Tian-Shansky,
A. Stanek,
J. R. Stevens,
L. Szymanowski,
C. Weiss,
B. -G. Yu
Abstract:
Backward angle (u-channel) scattering provides complementary information for studies of hadron spectroscopy and structure, but has been less comprehensively studied than the corresponding forward angle case. As a result, the physics of u-channel scattering poses a range of new experimental and theoretical opportunities and questions. We summarize recent progress in measuring and understanding high…
▽ More
Backward angle (u-channel) scattering provides complementary information for studies of hadron spectroscopy and structure, but has been less comprehensively studied than the corresponding forward angle case. As a result, the physics of u-channel scattering poses a range of new experimental and theoretical opportunities and questions. We summarize recent progress in measuring and understanding high energy reactions with baryon charge exchange in the u-channel, as discussed in the first backward angle (u-channel) Physics Workshop. In particular, we discuss backward angle measurements and their theoretical description via both hadronic models and the collinear factorization approach, and discuss planned future measurements of u-channel physics. Finally, we propose outstanding questions and challenges for u-channel physics.
△ Less
Submitted 9 February, 2022; v1 submitted 14 July, 2021;
originally announced July 2021.
-
GNNerator: A Hardware/Software Framework for Accelerating Graph Neural Networks
Authors:
Jacob R. Stevens,
Dipankar Das,
Sasikanth Avancha,
Bharat Kaul,
Anand Raghunathan
Abstract:
Graph Neural Networks (GNNs) use a fully-connected layer to extract features from the nodes of a graph and aggregate these features using message passing between nodes, combining two distinct computational patterns: dense, regular computations and sparse, irregular computations.
To address this challenge, we propose GNNerator, an accelerator with heterogeneous compute engines optimized for these…
▽ More
Graph Neural Networks (GNNs) use a fully-connected layer to extract features from the nodes of a graph and aggregate these features using message passing between nodes, combining two distinct computational patterns: dense, regular computations and sparse, irregular computations.
To address this challenge, we propose GNNerator, an accelerator with heterogeneous compute engines optimized for these two patterns.
Further, GNNerator implements feature-blocking, a novel GNN dataflow that beneficially trades off irregular memory accesses during aggregation for regular memory accesses during feature extraction. We show GNNerator achieves speedups of 5.7-37x over an NVIDIA RTX 2080-Ti, and 2.3x-3.8x over HyGCN, a state-of-the-art GNN accelerator.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
-
Softermax: Hardware/Software Co-Design of an Efficient Softmax for Transformers
Authors:
Jacob R. Stevens,
Rangharajan Venkatesan,
Steve Dai,
Brucek Khailany,
Anand Raghunathan
Abstract:
Transformers have transformed the field of natural language processing. This performance is largely attributed to the use of stacked self-attention layers, each of which consists of matrix multiplies as well as softmax operations. As a result, unlike other neural networks, the softmax operation accounts for a significant fraction of the total run-time of Transformers. To address this, we propose S…
▽ More
Transformers have transformed the field of natural language processing. This performance is largely attributed to the use of stacked self-attention layers, each of which consists of matrix multiplies as well as softmax operations. As a result, unlike other neural networks, the softmax operation accounts for a significant fraction of the total run-time of Transformers. To address this, we propose Softermax, a hardware-friendly softmax design. Softermax consists of base replacement, low-precision softmax computations, and an online normalization calculation. We show Softermax results in 2.35x the energy efficiency at 0.90x the size of a comparable baseline, with negligible impact on network accuracy.
△ Less
Submitted 16 March, 2021;
originally announced March 2021.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
In situ Performance of the Low Frequency Arrayfor Advanced ACTPol
Authors:
Yaqiong Li,
Jason E. Austermann,
James A. Beall,
Sarah Marie Bruno,
Steve K. Choi,
Nicholas F. Cothard,
Kevin T. Crowley,
Shannon M. Duff,
Shuay-Pwu Patty Ho,
Joseph E. Golec,
Gene C. Hilton,
Matthew Hasselfield,
Johannes Hubmay,
Brian J. Koopman,
Marius Lungu,
Jeff McMahon,
Michael D. Niemack,
LymanA. Page,
Maria Salatino,
Sara M. Simon,
Suzanne T. Staggs,
Jason R. Stevens,
Joel N. Ullom,
Eve M. Vavagiakis,
Yuhan Wang
, et al. (2 additional authors not shown)
Abstract:
The Advanced Atacama Cosmology Telescope Polarimeter (AdvACT) \cite{thornton} is an upgrade for the Atacama Cosmology Telescope using Transition Edge Sensor (TES) detector arrays to measure cosmic microwave background (CMB) temperature and polarization anisotropies in multiple frequencies. The low frequency (LF) array was deployed early 2020. It consists of 292 TES bolometers observing in two band…
▽ More
The Advanced Atacama Cosmology Telescope Polarimeter (AdvACT) \cite{thornton} is an upgrade for the Atacama Cosmology Telescope using Transition Edge Sensor (TES) detector arrays to measure cosmic microwave background (CMB) temperature and polarization anisotropies in multiple frequencies. The low frequency (LF) array was deployed early 2020. It consists of 292 TES bolometers observing in two bands centered at 27 GHz and 39 GHz. At these frequencies, it is sensitive to synchrotron radiation from our galaxy as well as to the CMB, and complements the AdvACT arrays operating at 90, 150 and 230 GHz. We present the initial LF array on-site characterization, including the time constant, optical efficiency and array sensitivity.
△ Less
Submitted 12 January, 2021; v1 submitted 7 January, 2021;
originally announced January 2021.
-
AxFormer: Accuracy-driven Approximation of Transformers for Faster, Smaller and more Accurate NLP Models
Authors:
Amrit Nagarajan,
Sanchari Sen,
Jacob R. Stevens,
Anand Raghunathan
Abstract:
Transformers have greatly advanced the state-of-the-art in Natural Language Processing (NLP) in recent years, but present very large computation and storage requirements. We observe that the design process of Transformers (pre-train a foundation model on a large dataset in a self-supervised manner, and subsequently fine-tune it for different downstream tasks) leads to task-specific models that are…
▽ More
Transformers have greatly advanced the state-of-the-art in Natural Language Processing (NLP) in recent years, but present very large computation and storage requirements. We observe that the design process of Transformers (pre-train a foundation model on a large dataset in a self-supervised manner, and subsequently fine-tune it for different downstream tasks) leads to task-specific models that are highly over-parameterized, adversely impacting both accuracy and inference efficiency. We propose AxFormer, a systematic framework that applies accuracy-driven approximations to create optimized transformer models for a given downstream task. AxFormer combines two key optimizations -- accuracy-driven pruning and selective hard attention. Accuracy-driven pruning identifies and removes parts of the fine-tuned transformer that hinder performance on the given downstream task. Sparse hard-attention optimizes attention blocks in selected layers by eliminating irrelevant word aggregations, thereby hel** the model focus only on the relevant parts of the input. In effect, AxFormer leads to models that are more accurate, while also being faster and smaller. Our experiments on GLUE and SQUAD tasks show that AxFormer models are up to 4.5% more accurate, while also being up to 2.5X faster and up to 3.2X smaller than conventional fine-tuned models. In addition, we demonstrate that AxFormer can be combined with previous efforts such as distillation or quantization to achieve further efficiency gains.
△ Less
Submitted 9 June, 2022; v1 submitted 7 October, 2020;
originally announced October 2020.
-
Measurement of beam asymmetry for $π^-Δ^{++}$ photoproduction on the proton at $E_γ$=8.5 GeV
Authors:
GlueX Collaboration,
S. Adhikari,
C. S. Akondi,
A. Ali,
M. Amaryan,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (112 additional authors not shown)
Abstract:
We report a measurement of the $π^-$ photoproduction beam asymmetry for the reaction $\vecγ p \rightarrow π^- Δ^{++}$ using data from the GlueX experiment in the photon beam energy range 8.2--8.8 GeV. The asymmetry $Σ$ is measured as a function of four-momentum transfer $t$ to the $Δ^{++}$ and compared to phenomenological models. We find that $Σ$ varies as a function of $t$: negative at smaller va…
▽ More
We report a measurement of the $π^-$ photoproduction beam asymmetry for the reaction $\vecγ p \rightarrow π^- Δ^{++}$ using data from the GlueX experiment in the photon beam energy range 8.2--8.8 GeV. The asymmetry $Σ$ is measured as a function of four-momentum transfer $t$ to the $Δ^{++}$ and compared to phenomenological models. We find that $Σ$ varies as a function of $t$: negative at smaller values and positive at higher values of $|t|$. The reaction can be described theoretically by $t$-channel particle exchange requiring pseudoscalar, vector, and tensor intermediaries. In particular, this reaction requires charge exchange, allowing us to probe pion exchange and the significance of higher-order corrections to one-pion exchange at low momentum transfer. Constraining production mechanisms of conventional mesons may aid in the search for and study of unconventional mesons. This is the first measurement of the process at this energy.
△ Less
Submitted 8 January, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Backward-angle Exclusive pi0 Production above the Resonance Region
Authors:
W. B. Li,
G. M. Huber,
J. R. Stevens,
K. Semenov-Tian-Shansky,
L. Szymanowski,
B. Pire,
M. Amaryan,
D. Androic,
K. Aniol,
D. Armstrong,
T. Averett,
C. Ayerbe Gayoso,
W. Boeglin,
M. Boer,
A. Camsonne,
J. Chen,
S. Covrig Dusa,
W. Deconinck,
M. Defurne,
F. Delcarro,
M. Diefenthaler,
S. Diehl,
M. Elaasar,
C. Fanelli,
S. Fegan
, et al. (37 additional authors not shown)
Abstract:
The proposed measurement is a dedicated study of the exclusive electroproduction process,1H(e,e'p)pi0, in the backward-angle regime (u-channel process) above the resonance region. The produced pi0 is emitted 180 degrees opposite to the virtual-photon momentum. This study also aims to apply the well-known Rosenbluth separation technique that provides the model-independent differential cross-section…
▽ More
The proposed measurement is a dedicated study of the exclusive electroproduction process,1H(e,e'p)pi0, in the backward-angle regime (u-channel process) above the resonance region. The produced pi0 is emitted 180 degrees opposite to the virtual-photon momentum. This study also aims to apply the well-known Rosenbluth separation technique that provides the model-independent differential cross-sections at the never explored u-channel kinematics region. Currently, the "soft-hard transition" in u-channel meson production remains an interesting and unexplored subject. The available theoretical frameworks offer competing interpretations for the observed backward-angle cross section peaks. In a "soft" hadronic Regge exchange description, the backward meson production comes from the interference between nucleon exchange and the meson produced via re-scattering within the nucleon. Whereas in the "hard" GPD-like backward collinear factorization regime, the scattering amplitude factorizes into a hard subprocess amplitude and baryon to meson transition distribution amplitudes (TDAs), otherwise known as super skewed parton distributions (SuperSPDs). Both TDAs and SPDs are universal non-perturbative objects of nucleon structure accessible only through backward-angle kinematics. The separated cross sections:sigma_T,sigma_L and T/L ratio at Q2=2-6 GeV2, provide a direct test of two predictions from the TDA model. The magnitude and u-dependence of the separated cross sections also provide a direct connection to the re-scattering Regge picture. The extracted interaction radius (from u-dependence) at different Q2 can be used to study the soft-hard transition in the u-channel kinematics. The acquisition of these data will be an important step forward in validating the existence of a backward factorization scheme of the nucleon structure function and establishing its applicable kinematic range.
△ Less
Submitted 30 July, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
The GlueX Beamline and Detector
Authors:
S. Adhikari,
C. S. Akondi,
H. Al Ghoul,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
J. Benesch,
V. V. Berdnikov,
G. Biallas,
T. Black,
W. Boeglin,
P. Brindza,
W. J. Briscoe,
T. Britton,
J. Brock,
W. K. Brooks,
B. E. Cannon,
C. Carlin
, et al. (165 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based…
▽ More
The GlueX experiment at Jefferson Lab has been designed to study photoproduction reactions with a 9-GeV linearly polarized photon beam. The energy and arrival time of beam photons are tagged using a scintillator hodoscope and a scintillating fiber array. The photon flux is determined using a pair spectrometer, while the linear polarization of the photon beam is determined using a polarimeter based on triplet photoproduction. Charged-particle tracks from interactions in the central target are analyzed in a solenoidal field using a central straw-tube drift chamber and six packages of planar chambers with cathode strips and drift wires. Electromagnetic showers are reconstructed in a cylindrical scintillating fiber calorimeter inside the magnet and a lead-glass array downstream. Charged particle identification is achieved by measuring energy loss in the wire chambers and using the flight time of particles between the target and detectors outside the magnet. The signals from all detectors are recorded with flash ADCs and/or pipeline TDCs into memories allowing trigger decisions with a latency of 3.3 $μ$s. The detector operates routinely at trigger rates of 40 kHz and data rates of 600 megabytes per second. We describe the photon beam, the GlueX detector components, electronics, data-acquisition and monitoring systems, and the performance of the experiment during the first three years of operation.
△ Less
Submitted 26 October, 2020; v1 submitted 28 May, 2020;
originally announced May 2020.
-
Installation and Commissioning of the GlueX DIRC
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
E. Ihloff,
G. Kalicy,
J. Kelsey,
W. B. Li,
M. Patsyuk,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known…
▽ More
The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar experiment. The identification and separation of the kaon final states will significantly enhance the GlueX physics program, by adding the capability of accessing the strange quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings, we report that the installation and commissioning of the DIRC detector has been successfully completed.
△ Less
Submitted 1 June, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design
Authors:
Mayuri Sathyanarayana Rao,
Maximiliano Silva-Feaver,
Aamir Ali,
Kam Arnold,
Peter Ashton,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Nicholas Galitzki,
Erin Healy,
Shawn Henderson,
Shuay-Pwu Patty Ho,
Jonathan Hoh,
Anna M. Kofman,
Akito Kusaka,
Adrian T. Lee,
Aashrita Mangu,
Justin Mathewson,
Philip Mauskopf,
Heather McCarrick,
Jenna Moore,
Michael D. Niemack,
Christopher Raum,
Maria Salatino,
Trevor Sasse
, et al. (11 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiple…
▽ More
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiplexing factor of \bigO{(1,000)}, microwave SQUID multiplexing has never been deployed on the scale needed for SO. Here we present the design of the cryogenic coaxial cable and RF component chain that connects room temperature readout electronics to superconducting resonators that are coupled to Transition Edge Sensor bolometers operating at sub-Kelvin temperatures. We describe design considerations including cryogenic RF component selection, system linearity, noise, and thermal power dissipation.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Measurement of the Photon Beam Asymmetry in $\vecγ p\to K^+Σ^0$ at $E_γ = 8.5$ GeV
Authors:
The GlueX Collaboration,
S. Adhikari,
A. Ali,
M. Amaryan,
A. Austregesilo,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton,
T. Daniels,
A. Deur
, et al. (102 additional authors not shown)
Abstract:
We report measurements of the photon beam asymmetry $Σ$ for the reaction $\vecγ p\to K^+Σ^0$(1193) using the GlueX spectrometer in Hall D at Jefferson Lab. Data were collected using a linearly polarized photon beam in the energy range of 8.2-8.8 GeV incident on a liquid hydrogen target. The beam asymmetry $Σ$ was measured as a function of the Mandelstam variable $t$, and a single value of $Σ$ was…
▽ More
We report measurements of the photon beam asymmetry $Σ$ for the reaction $\vecγ p\to K^+Σ^0$(1193) using the GlueX spectrometer in Hall D at Jefferson Lab. Data were collected using a linearly polarized photon beam in the energy range of 8.2-8.8 GeV incident on a liquid hydrogen target. The beam asymmetry $Σ$ was measured as a function of the Mandelstam variable $t$, and a single value of $Σ$ was extracted for events produced in the $u$-channel. These are the first exclusive measurements of the photon beam asymmetry $Σ$ for the reaction in this energy range. For the $t$-channel, the measured beam asymmetry is close to unity over the $t$-range studied, $-t=(0.1-1.4)~$(GeV/$c$)$^{2}$, with an average value of $Σ= 1.00\pm 0.05$. This agrees with theoretical models that describe the reaction via the natural-parity exchange of the $K^{*}$(892) Regge trajectory. A value of $Σ= 0.41 \pm 0.09$ is obtained for the $u$-channel integrated up to $-u=2.0$~(GeV/$c$)$^{2}$.
△ Less
Submitted 12 May, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
The GlueX DIRC Program
Authors:
A. Ali,
F. Barbosa,
J. Bessuille,
E. Chudakov,
R. Dzhygadlo,
C. Fanelli,
J. Frye,
J. Hardin,
A. Hurley,
G. Kalicy,
J. Kelsey,
W. Li,
M. Patsyuk,
C. Schwarz,
J. Schwiening,
M. Shepherd,
J. R. Stevens,
T. Whitlatch,
M. Williams,
Y. Yang
Abstract:
The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the…
▽ More
The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar DIRC. The identification of kaon final states will significantly enhance the GlueX physics program, to aid in inferring the quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings we describe the installation of the GlueX DIRC and the analysis of initial commissioning data
△ Less
Submitted 12 March, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
Characterization of Transition Edge Sensors for the Simons Observatory
Authors:
Jason R. Stevens,
Nicholas F. Cothard,
Eve M. Vavagiakis,
Aamir Ali,
Kam Arnold,
Jason E. Austermann,
Steve K. Choi,
Bradley J. Dober,
Cody Duell,
Shannon M. Duff,
Gene C. Hilton,
Shuay-Pwu Patty Ho,
Thuong D. Hoang,
Johannes Hubmayr,
Adrian T. Lee,
Aashrita Mangu,
Federico Nati,
Michael D. Niemack,
Christopher Raum,
Mario Renzullo,
Maria Salatino,
Trevor Sasse,
Sara M. Simon,
Suzanne Staggs,
Aritoki Suzuki
, et al. (9 additional authors not shown)
Abstract:
The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices…
▽ More
The Simons Observatory is building both large (6 m) and small (0.5 m) aperture telescopes in the Atacama desert in Chile to observe the cosmic microwave background (CMB) radiation with unprecedented sensitivity. Simons Observatory telescopes in total will use over 60,000 transition edge sensor (TES) detectors spanning center frequencies between 27 and 285 GHz and operating near 100 mK. TES devices have been fabricated for the Simons Observatory by NIST, Berkeley, and HYPRES/SeeQC corporation. Iterations of these devices have been tested cryogenically in order to inform the fabrication of further devices, which will culminate in the final TES designs to be deployed in the field. The detailed design specifications have been independently iterated at each fabrication facility for particular detector frequencies.
We present test results for prototype devices, with emphasis on NIST high frequency detectors. A dilution refrigerator was used to achieve the required temperatures. Measurements were made both with 4-lead resistance measurements and with a time domain Superconducting Quantum Interference Device (SQUID) multiplexer system. The SQUID readout measurements include analysis of current vs voltage (IV) curves at various temperatures, square wave bias step measurements, and detector noise measurements. Normal resistance, superconducting critical temperature, saturation power, thermal and natural time constants, and thermal properties of the devices are extracted from these measurements.
△ Less
Submitted 21 January, 2020; v1 submitted 2 December, 2019;
originally announced December 2019.
-
Develo** AlMn films for Argonne TES fabrication
Authors:
E. M. Vavagiakis,
N. F. Cothard,
J. R. Stevens,
C. L. Chang,
M. D. Niemack,
G. Wang,
V. G. Yefremenko,
J. Zhang
Abstract:
The reference design for the next-generation cosmic microwave background (CMB) experiment, CMB-S4, relies on large arrays of transition edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. Map** the CMB to near cosmic variance limits will enable the search for signatures of inflation and constrain dark energy and neutrino physics. AlM…
▽ More
The reference design for the next-generation cosmic microwave background (CMB) experiment, CMB-S4, relies on large arrays of transition edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. Map** the CMB to near cosmic variance limits will enable the search for signatures of inflation and constrain dark energy and neutrino physics. AlMn TESes provide simple film manufacturing and highly uniform arrays over large areas to meet the requirements of the CMB-S4 experiment. TES parameters such as critical temperature and normal resistance must be tuned to experiment specifications and can be varied based on geometry and steps in the fabrication process such as deposition layering, geometry, and baking time and temperature. Using four-terminal sensing, we measured $T_C$ and $R_N$ of AlMn 2000 ppm films and devices of varying thicknesses fabricated at Argonne National Laboratory to motivate device geometries and fabrication processes to tune $T_C$ to 150-200 mK and $R_N$ to $\sim$10 mOhms. Measurements of IV curves and time constants for the resulting devices of varying leg length were made using time-division SQUID multiplexing, and determined $T_C$, $G$, $k$, $f_{3db}$, and $R_N$. We present the results of these tests along with the geometries and fabrication steps used to tune the device parameters to the desired limits.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Sensitivity of the Prime-Cam Instrument on the CCAT-prime Telescope
Authors:
Steve K. Choi,
Jason Austermann,
Kaustuv Basu,
Nicholas Battaglia,
Frank Bertoldi,
Dongwoo T. Chung,
Nicholas F. Cothard,
Shannon Duff,
Cody J. Duell,
Patricio A. Gallardo,
Jiansong Gao,
Terry Herter,
Johannes Hubmayr,
Michael D. Niemack,
Thomas Nikola,
Dominik Riechers,
Kayla Rossi,
Gordon J. Stacey,
Jason R. Stevens,
Eve M. Vavagiakis,
Michael Vissers,
Samantha Walker
Abstract:
CCAT-prime is a new 6 m crossed Dragone telescope designed to characterize the Cosmic Microwave Background (CMB) polarization and foregrounds, measure the Sunyaev-Zel'dovich effects of galaxy clusters, map the [CII] emission intensity from the Epoch of Reionization (EoR), and monitor accretion luminosity over multi-year timescales of hundreds of protostars in the Milky Way. CCAT-prime will make ob…
▽ More
CCAT-prime is a new 6 m crossed Dragone telescope designed to characterize the Cosmic Microwave Background (CMB) polarization and foregrounds, measure the Sunyaev-Zel'dovich effects of galaxy clusters, map the [CII] emission intensity from the Epoch of Reionization (EoR), and monitor accretion luminosity over multi-year timescales of hundreds of protostars in the Milky Way. CCAT-prime will make observations from a 5,600 m altitude site on Cerro Chajnantor in the Atacama Desert of northern Chile. The novel optical design of the telescope combined with high surface accuracy ($<$10 $μ$m) mirrors and the exceptional atmospheric conditions of the site will enable sensitive broadband, polarimetric, and spectroscopic surveys at sub-mm to mm wavelengths. Prime-Cam, the first light instrument for CCAT-prime, consists of a 1.8 m diameter cryostat that can house seven individual instrument modules. Each instrument module, optimized for a specific science goal, will use state-of-the-art kinetic inductance detector (KID) arrays operated at $\sim$100 mK, and Fabry-Perot interferometers (FPI) for the EoR science. Prime-Cam will be commissioned with staged deployments to populate the seven instrument modules. The full instrument will consist of 60,000 polarimetric KIDs at a combination of 220/280/350/410 GHz, 31,000 KIDS at 250/360 GHz coupled with FPIs, and 21,000 polarimetric KIDs at 850 GHz. Prime-Cam is currently being built, and the CCAT-prime telescope is designed and under construction by Vertex Antennentechnik GmbH to achieve first light in 2021. CCAT-prime is also a potential telescope platform for the future CMB Stage-IV observations.
△ Less
Submitted 31 March, 2020; v1 submitted 27 August, 2019;
originally announced August 2019.
-
Beam Asymmetry $\mathbfΣ$ for the Photoproduction of $\mathbfη$ and $\mathbf{η^{\prime}}$ Mesons at $\mathbf{E_γ=8.8}$GeV
Authors:
The GlueX Collaboration,
S. Adhikari,
A. Ali,
M. Amaryan,
A. Austregesilo,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
R. Barsotti,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (109 additional authors not shown)
Abstract:
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precisio…
▽ More
We report on the measurement of the beam asymmetry $Σ$ for the reactions $\vecγp\rightarrow pη$ and $\vecγp \rightarrow pη^{\prime}$ from the GlueX experiment, using an 8.2--8.8 GeV linearly polarized tagged photon beam incident on a liquid hydrogen target in Hall D at Jefferson Lab. These measurements are made as a function of momentum transfer $-t$, with significantly higher statistical precision than our earlier $η$ measurements, and are the first measurements of $η^{\prime}$ in this energy range. We compare the results to theoretical predictions based on $t$--channel quasi-particle exchange. We also compare the ratio of $Σ_η$ to $Σ_{η^{\prime}}$ to these models, as this ratio is predicted to be sensitive to the amount of $s\bar{s}$ exchange in the production. We find that photoproduction of both $η$ and $η^{\prime}$ is dominated by natural parity exchange with little dependence on $-t$.
△ Less
Submitted 24 November, 2019; v1 submitted 15 August, 2019;
originally announced August 2019.
-
The Simons Observatory: Astro2020 Decadal Project Whitepaper
Authors:
The Simons Observatory Collaboration,
Maximilian H. Abitbol,
Shunsuke Adachi,
Peter Ade,
James Aguirre,
Zeeshan Ahmed,
Simone Aiola,
Aamir Ali,
David Alonso,
Marcelo A. Alvarez,
Kam Arnold,
Peter Ashton,
Zachary Atkins,
Jason Austermann,
Humna Awan,
Carlo Baccigalupi,
Taylor Baildon,
Anton Baleato Lizancos,
Darcy Barron,
Nick Battaglia,
Richard Battye,
Eric Baxter,
Andrew Bazarko,
James A. Beall,
Rachel Bean
, et al. (258 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) experiment sited on Cerro Toco in the Atacama Desert in Chile that promises to provide breakthrough discoveries in fundamental physics, cosmology, and astrophysics. Supported by the Simons Foundation, the Heising-Simons Foundation, and with contributions from collaborating institutions, SO will see first light in 2021 and start a five year survey in 2022. SO has 287 collaborators from 12 countries and 53 institutions, including 85 students and 90 postdocs.
The SO experiment in its currently funded form ('SO-Nominal') consists of three 0.4 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT). Optimized for minimizing systematic errors in polarization measurements at large angular scales, the SATs will perform a deep, degree-scale survey of 10% of the sky to search for the signature of primordial gravitational waves. The LAT will survey 40% of the sky with arc-minute resolution. These observations will measure (or limit) the sum of neutrino masses, search for light relics, measure the early behavior of Dark Energy, and refine our understanding of the intergalactic medium, clusters and the role of feedback in galaxy formation.
With up to ten times the sensitivity and five times the angular resolution of the Planck satellite, and roughly an order of magnitude increase in map** speed over currently operating ("Stage 3") experiments, SO will measure the CMB temperature and polarization fluctuations to exquisite precision in six frequency bands from 27 to 280 GHz. SO will rapidly advance CMB science while informing the design of future observatories such as CMB-S4.
△ Less
Submitted 16 July, 2019;
originally announced July 2019.
-
First measurement of near-threshold J/$ψ$ exclusive photoproduction off the proton
Authors:
The GlueX Collaboration,
A. Ali,
M. Amaryan,
E. G. Anassontzis,
A. Austregesilo,
M. Baalouch,
F. Barbosa,
J. Barlow,
A. Barnes,
E. Barriga,
T. D. Beattie,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
W. K. Brooks,
B. E. Cannon,
N. Cao,
E. Chudakov,
S. Cole,
O. Cortes,
V. Crede,
M. M. Dalton
, et al. (110 additional authors not shown)
Abstract:
We report on the measurement of the $γp \rightarrow J/ψp$ cross section from $E_γ= 11.8$ GeV down to the threshold at $8.2$ GeV using a tagged photon beam with the GlueX experiment. We find the total cross section falls toward the threshold less steeply than expected from two-gluon exchange models. The differential cross section $dσ/dt$ has an exponential slope of $1.67 \pm 0.39$ GeV$^{-2}$ at…
▽ More
We report on the measurement of the $γp \rightarrow J/ψp$ cross section from $E_γ= 11.8$ GeV down to the threshold at $8.2$ GeV using a tagged photon beam with the GlueX experiment. We find the total cross section falls toward the threshold less steeply than expected from two-gluon exchange models. The differential cross section $dσ/dt$ has an exponential slope of $1.67 \pm 0.39$ GeV$^{-2}$ at $10.7$ GeV average energy. The LHCb pentaquark candidates $P_c^+$ can be produced in the $s$-channel of this reaction. We see no evidence for them and set model-dependent upper limits on their branching fractions $\mathcal{B}(P_c^+ \rightarrow J/ψp)$ and cross sections $σ(γp \to P_c^+)\times\mathcal{B}(P_c^+ \to J/ψp) $.
△ Less
Submitted 10 September, 2019; v1 submitted 26 May, 2019;
originally announced May 2019.
-
The Simons Observatory: Science goals and forecasts
Authors:
The Simons Observatory Collaboration,
Peter Ade,
James Aguirre,
Zeeshan Ahmed,
Simone Aiola,
Aamir Ali,
David Alonso,
Marcelo A. Alvarez,
Kam Arnold,
Peter Ashton,
Jason Austermann,
Humna Awan,
Carlo Baccigalupi,
Taylor Baildon,
Darcy Barron,
Nick Battaglia,
Richard Battye,
Eric Baxter,
Andrew Bazarko,
James A. Beall,
Rachel Bean,
Dominic Beck,
Shawn Beckman,
Benjamin Beringue,
Federico Bianchini
, et al. (225 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225…
▽ More
The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes (SATs) and one large-aperture 6-m telescope (LAT), with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The SATs will target the largest angular scales observable from Chile, map** ~10% of the sky to a white noise level of 2 $μ$K-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, $r$, at a target level of $σ(r)=0.003$. The LAT will map ~40% of the sky at arcminute angular resolution to an expected white noise level of 6 $μ$K-arcmin in combined 93 and 145 GHz bands, overlap** with the majority of the LSST sky region and partially with DESI. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the dam** tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources.
△ Less
Submitted 1 March, 2019; v1 submitted 22 August, 2018;
originally announced August 2018.
-
Designs for next generation CMB survey strategies from Chile
Authors:
Jason R. Stevens,
Neil Goeckner-Wald,
Reijo Keskitalo,
Nialh McCallum,
Aamir Ali,
Julian Borrill,
Michael L. Brown,
Yuji Chinone,
Patricio A. Gallardo,
Akito Kusaka,
Adrian T. Lee,
Jeff McMahon,
Michael D. Niemack,
Lyman Page,
Giuseppe Puglisi,
Maria Salatino,
Suet Ying D. Mak,
Grant Teply,
Daniel B. Thomas,
Eve M. Vavagiakis,
Edward J. Wollack,
Zhilei Xu,
Ningfeng Zhu
Abstract:
New telescopes are being built to measure the Cosmic Microwave Background (CMB) with unprecedented sensitivity, including Simons Observatory (SO), CCAT-prime, the BICEP Array, SPT-3G, and CMB Stage-4. We present observing strategies for telescopes located in Chile that are informed by the tools used to develop recent Atacama Cosmology Telescope (ACT) and Polarbear surveys. As with ACT and Polarbea…
▽ More
New telescopes are being built to measure the Cosmic Microwave Background (CMB) with unprecedented sensitivity, including Simons Observatory (SO), CCAT-prime, the BICEP Array, SPT-3G, and CMB Stage-4. We present observing strategies for telescopes located in Chile that are informed by the tools used to develop recent Atacama Cosmology Telescope (ACT) and Polarbear surveys. As with ACT and Polarbear, these strategies are composed of scans that sweep in azimuth at constant elevation. We explore observing strategies for both small (0.42 m) aperture telescopes (SAT) and a large (6 m) aperture telescope (LAT). We study strategies focused on small sky areas to search for inflationary gravitational waves as well as strategies spanning roughly half the low-foreground sky to constrain the effective number of relativistic species and measure the sum of neutrino masses via the gravitational lensing signal due to large scale structure. We present these strategies specifically considering the telescope hardware and science goals of the SO, located at 23 degrees South latitude, 67.8 degrees West longitude. Observations close to the Sun and the Moon can introduce additional systematics by applying additional power to the instrument through telescope sidelobes. Significant side lobe contamination in the data can occur even at tens of degrees or more from bright sources. Therefore, we present several strategies that implement Sun and Moon avoidance constraints into the telescope scheduling. Strategies for resolving conflicts between simultaneously visible fields are discussed. We focus on maximizing telescope time spent on science observations. It will also be necessary to schedule calibration measurements, however that is beyond the scope of this work. The outputs of this study are algorithms that can generate specific schedule commands for the Simons Observatory instruments.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
The Simons Observatory: Instrument Overview
Authors:
Nicholas Galitzki,
Aamir Ali,
Kam S. Arnold,
Peter C. Ashton,
Jason E. Austermann,
Carlo Baccigalupi,
Taylor Baildon,
Darcy Barron,
James A. Beall,
Shawn Beckman,
Sarah Marie M. Bruno,
Sean Bryan,
Paolo G. Calisse,
Grace E. Chesmore,
Yuji Chinone,
Steve K. Choi,
Gabriele Coppi,
Kevin D. Crowley,
Kevin T. Crowley,
Ari Cukierman,
Mark J. Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Jo Dunkley
, et al. (53 additional authors not shown)
Abstract:
The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor…
▽ More
The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor bolometers along with three 42 cm aperture refractive telescopes, coupled to an additional 30,000+ detectors, all of which will be located in the Atacama Desert at an altitude of 5190 m. The powerful combination of large and small apertures in a CMB observatory will allow us to sample a wide range of angular scales over a common survey area. SO will measure fundamental cosmological parameters of our universe, constrain primordial fluctuations, find high redshift clusters via the Sunyaev-Zel`dovich effect, constrain properties of neutrinos, and trace the density and velocity of the matter in the universe over cosmic time. The complex set of technical and science requirements for this experiment has led to innovative instrumentation solutions which we will discuss. The large aperture telescope will couple to a cryogenic receiver that is 2.4 m in diameter and nearly 3 m long, creating a number of technical challenges. Concurrently, we are designing the array of cryogenic receivers housing the 42 cm aperture telescopes. We will discuss the sensor technology SO will use and we will give an overview of the drivers for and designs of the SO telescopes and receivers, with their cold optical components and detector arrays.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Advanced ACTPol TES Device Parameters and Noise Performance in Fielded Arrays
Authors:
Kevin T. Crowley,
Jason E. Austermann,
Steve K. Choi,
Shannon M. Duff,
Patricio A. Gallardo,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Brian J. Koopman,
Federico Nati,
Michael D. Niemack,
Maria Salatino,
Sara M. Simon,
Suzanne T. Staggs,
Jason R. Stevens,
Joel N. Ullom,
Eve M. Vavagiakis,
Edward J. Wollack
Abstract:
The Advanced ACTPol (AdvACT) upgrade to the Atacama Cosmology Telescope (ACT) features arrays of aluminum manganese transition-edge sensors (TESes) optimized for ground-based observations of the Cosmic Microwave Background (CMB). Array testing shows highly responsive detectors with anticipated in-band noise performance under optical loading. We report on TES parameters measured with impedance data…
▽ More
The Advanced ACTPol (AdvACT) upgrade to the Atacama Cosmology Telescope (ACT) features arrays of aluminum manganese transition-edge sensors (TESes) optimized for ground-based observations of the Cosmic Microwave Background (CMB). Array testing shows highly responsive detectors with anticipated in-band noise performance under optical loading. We report on TES parameters measured with impedance data taken on a subset of TESes. We then compare modeled noise spectral densities to measurements. We find excess noise at frequencies around 100 Hz, nearly outside of the signal band of CMB measurements. In addition, we describe full-array noise measurements in the laboratory and in the field for two new AdvACT mid-frequency arrays, sensitive at bands centered on 90 and 150 GHz, and data for the high-frequency array (150/230 GHz) as deployed.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Prime-Cam: A first-light instrument for the CCAT-prime telescope
Authors:
Eve M. Vavagiakis,
Zeeshan Ahmed,
Aamir Ali,
Kaustuv Basu,
Nicholas Battaglia,
Frank Bertoldi,
Richard Bond,
Ricardo Bustos,
Scott C. Chapman,
Dongwoo Chung,
Gabriele Coppi,
Nicholas F. Cothard,
Simon Dicker,
Cody J. Duell,
Shannon M. Duff,
Jens Erler,
Michel Fich,
Nicholas Galitzki,
Patricio A. Gallardo,
Shawn W. Henderson,
Terry L. Herter,
Gene Hilton,
Johannes Hubmayr,
Kent D. Irwin,
Brian J. Koopman
, et al. (21 additional authors not shown)
Abstract:
CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high throughput, wide field of view capable of illuminating much larger arrays of sub-mm and mm detectors than can existing telescopes. We present an overview of the moti…
▽ More
CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high throughput, wide field of view capable of illuminating much larger arrays of sub-mm and mm detectors than can existing telescopes. We present an overview of the motivation and design of Prime-Cam, a first-light instrument for CCAT-prime. Prime-Cam will house seven instrument modules in a 1.8 meter diameter cryostat, cooled by a dilution refrigerator. The optical elements will consist of silicon lenses, and the instrument modules can be individually optimized for particular science goals. The current design enables both broadband, dual-polarization measurements and narrow-band, Fabry-Perot spectroscopic imaging using multichroic transition-edge sensor (TES) bolometers operating between 190 and 450 GHz. It also includes broadband kinetic induction detectors (KIDs) operating at 860 GHz. This wide range of frequencies will allow excellent characterization and removal of galactic foregrounds, which will enable precision measurements of the sub-mm and mm sky. Prime-Cam will be used to constrain cosmology via the Sunyaev-Zeldovich effects, map the intensity of [CII] 158 $μ$m emission from the Epoch of Reionization, measure Cosmic Microwave Background polarization and foregrounds, and characterize the star formation history over a wide range of redshifts. More information about CCAT-prime can be found at www.ccatobservatory.org.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
Advanced ACTPol Low Frequency Array: Readout and Characterization of Prototype 27 and 39 GHz Transition Edge Sensors
Authors:
Brian J. Koopman,
Nicholas F. Cothard,
Steve K. Choi,
Kevin T. Crowley,
Shannon M. Duff,
Shawn W. Henderson,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Patricio A. Gallardo,
Federico Nati,
Michael D. Niemack,
Sara M. Simon,
Suzanne T. Staggs,
Jason R. Stevens,
Eve M. Vavagiakis,
Edward J. Wollack
Abstract:
Advanced ACTPol (AdvACT) is a third generation polarization upgrade to the Atacama Cosmology Telescope, designed to observe the cosmic microwave background (CMB). AdvACT expands on the 90 and 150 GHz transition edge sensor (TES) bolometer arrays of the ACT Polarimeter (ACTPol), adding both high frequency (HF, 150/230 GHz) and low frequency (LF, 27/39 GHz) multichroic arrays. The addition of the hi…
▽ More
Advanced ACTPol (AdvACT) is a third generation polarization upgrade to the Atacama Cosmology Telescope, designed to observe the cosmic microwave background (CMB). AdvACT expands on the 90 and 150 GHz transition edge sensor (TES) bolometer arrays of the ACT Polarimeter (ACTPol), adding both high frequency (HF, 150/230 GHz) and low frequency (LF, 27/39 GHz) multichroic arrays. The addition of the high and low frequency detectors allows for the characterization of synchrotron and spinning dust emission at the low frequencies and foreground emission from galactic dust and dusty star forming galaxies at the high frequencies. The increased spectral coverage of AdvACT will enable a wide range of CMB science, such as improving constraints on dark energy, the sum of the neutrino masses, and the existence of primordial gravitational waves. The LF array will be the final AdvACT array, replacing one of the MF arrays for a single season. Prior to the fabrication of the final LF detector array, we designed and characterized prototype TES bolometers. Detector geometries in these prototypes are varied in order to inform and optimize the bolometer designs for the LF array, which requires significantly lower noise levels and saturation powers (as low as ${\sim}1$ pW) than the higher frequency detectors. Here we present results from tests of the first LF prototype TES detectors for AdvACT, including measurements of the saturation power, critical temperature, thermal conductance and time constants. We also describe the modifications to the time-division SQUID readout architecture compared to the MF and HF arrays.
△ Less
Submitted 2 May, 2018; v1 submitted 7 November, 2017;
originally announced November 2017.
-
Magnetic Sensitivity of AlMn TESes and Shielding Considerations for Next-Generation CMB Surveys
Authors:
E. M. Vavagiakis,
S. W. Henderson,
K. Zheng,
H. -M. Cho,
N. F. Cothard,
B. Dober,
S. M. Duff,
P. A. Gallardo,
G. Hilton,
J. Hubmayr,
K. D. Irwin,
B. J. Koopman,
D. Li,
F. Nati,
M. D. Niemack,
C. D. Reintsema,
S. Simon,
J. R. Stevens,
A. Suzuki,
B. Westbrook
Abstract:
In the next decade, new ground-based Cosmic Microwave Background (CMB) experiments such as Simons Observatory (SO), CCAT-prime, and CMB-S4 will increase the number of detectors observing the CMB by an order of magnitude or more, dramatically improving our understanding of cosmology and astrophysics. These projects will deploy receivers with as many as hundreds of thousands of transition edge senso…
▽ More
In the next decade, new ground-based Cosmic Microwave Background (CMB) experiments such as Simons Observatory (SO), CCAT-prime, and CMB-S4 will increase the number of detectors observing the CMB by an order of magnitude or more, dramatically improving our understanding of cosmology and astrophysics. These projects will deploy receivers with as many as hundreds of thousands of transition edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. It is well known that superconducting devices such as TESes and SQUIDs are sensitive to magnetic fields. However, the effects of magnetic fields on TESes are not easily predicted due to the complex behavior of the superconducting transition, which motivates direct measurements of the magnetic sensitivity of these devices. We present comparative four-lead measurements of the critical temperature versus applied magnetic field of AlMn TESes varying in geometry, do**, and leg length, including Advanced ACT (AdvACT) and POLARBEAR-2/Simons Array bolometers. Molybdenum-copper bilayer ACTPol TESes are also tested and are found to be more sensitive to magnetic fields than the AlMn devices. We present an observation of weak-link-like behavior in AlMn TESes at low critical currents. We also compare measurements of magnetic sensitivity for time division multiplexing SQUIDs and frequency division multiplexing microwave rf-SQUIDs. We discuss the implications of our measurements on the magnetic shielding required for future experiments that aim to map the CMB to near-fundamental limits.
△ Less
Submitted 16 May, 2018; v1 submitted 23 October, 2017;
originally announced October 2017.
-
Strange Hadron Spectroscopy with a Secondary KL Beam at GlueX
Authors:
M. J. Amaryan,
M. Bashkanov,
J. Ritman,
J. R. Stevens,
I. Strakovsky,
GlueX Collaboration
Abstract:
We propose to create a secondary beam of neutral kaons in Hall D at Jefferson Lab to be used with the GlueX experimental setup for strange hadron spectroscopy. A flux on the order of 3 x 10^4 KL/s will allow a broad range of measurements to be made by improving the statistics of previous data obtained on hydrogen targets by three orders of magnitude. Use of a deuteron target will provide first mea…
▽ More
We propose to create a secondary beam of neutral kaons in Hall D at Jefferson Lab to be used with the GlueX experimental setup for strange hadron spectroscopy. A flux on the order of 3 x 10^4 KL/s will allow a broad range of measurements to be made by improving the statistics of previous data obtained on hydrogen targets by three orders of magnitude. Use of a deuteron target will provide first measurements on the neutron which is {\it terra incognita}.
The experiment will measure both differential cross sections and self-analyzed polarizations of the produced Λ, Σ, Ξ, and Ω hyperons using the GlueX detector at the Jefferson Lab Hall D. The measurements will span c.m. cosθ from -0.95 to 0.95 in the c.m. range above W = 1490 MeV and up to 3500 MeV. These new GlueX data will greatly constrain partial-wave analyses and reduce model-dependent uncertainties in the extraction of strange resonance properties (including pole positions), and provide a new benchmark for comparisons with QCD-inspired models and lattice QCD calculations.
The proposed facility will also have an impact in the strange meson sector by providing measurements of the final-state Kπ system from threshold up to 2 GeV invariant mass to establish and improve on the pole positions and widths of all K*(Kπ) P-wave states as well as for the S-wave scalar meson κ(800).
△ Less
Submitted 21 July, 2017; v1 submitted 17 July, 2017;
originally announced July 2017.
-
Measurement of the beam asymmetry $Σ$ for $π^0$ and $η$ photoproduction on the proton at $E_γ= 9$ GeV
Authors:
GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
A. Austregesilo,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. J. Briscoe,
W. K. Brooks,
B. E. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
R. Dzhygadlo,
H. Egiyan,
P. Eugenio
, et al. (101 additional authors not shown)
Abstract:
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the fir…
▽ More
We report measurements of the photon beam asymmetry $Σ$ for the reactions $\vecγp\to pπ^0$ and $\vecγp\to pη$ from the GlueX experiment using a 9 GeV linearly-polarized, tagged photon beam incident on a liquid hydrogen target in Jefferson Lab's Hall D. The asymmetries, measured as a function of the proton momentum transfer, possess greater precision than previous $π^0$ measurements and are the first $η$ measurements in this energy regime. The results are compared with theoretical predictions based on $t$-channel, quasi-particle exchange and constrain the axial-vector component of the neutral meson production mechanism in these models.
△ Less
Submitted 15 May, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
Readout of two-kilopixel transition-edge sensor arrays for Advanced ACTPol
Authors:
Shawn W. Henderson,
Jason R. Stevens,
Mandana Amiri,
Jason Austermann,
James A. Beall,
Saptarshi Chaudhuri,
Hsiao-Mei Cho,
Steve K. Choi,
Nicholas F. Cothard,
Kevin T. Crowley,
Shannon M. Duff,
Colin P. Fitzgerald,
Patricio A. Gallardo,
Mark Halpern,
Matthew Hasselfield,
Gene Hilton,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Kent D. Irwin,
Brian J. Koopman,
Dale Li,
Yaqiong Li,
Jeff McMahon,
Federico Nati,
Michael D. Niemack
, et al. (8 additional authors not shown)
Abstract:
Advanced ACTPol is an instrument upgrade for the six-meter Atacama Cosmology Telescope (ACT) designed to measure the cosmic microwave background (CMB) temperature and polarization with arcminute-scale angular resolution. To achieve its science goals, Advanced ACTPol utilizes a larger readout multiplexing factor than any previous CMB experiment to measure detector arrays with approximately two thou…
▽ More
Advanced ACTPol is an instrument upgrade for the six-meter Atacama Cosmology Telescope (ACT) designed to measure the cosmic microwave background (CMB) temperature and polarization with arcminute-scale angular resolution. To achieve its science goals, Advanced ACTPol utilizes a larger readout multiplexing factor than any previous CMB experiment to measure detector arrays with approximately two thousand transition-edge sensor (TES) bolometers in each 150 mm detector wafer. We present the implementation and testing of the Advanced ACTPol time-division multiplexing readout architecture with a 64-row multiplexing factor. This includes testing of individual multichroic detector pixels and superconducting quantum interference device (SQUID) multiplexing chips as well as testing and optimizing of the integrated readout electronics. In particular, we describe the new automated multiplexing SQUID tuning procedure developed to select and optimize the thousands of SQUID parameters required to readout each Advanced ACTPol array. The multichroic detector pixels in each array use separate channels for each polarization and each of the two frequencies, such that four TESes must be read out per pixel. Challenges addressed include doubling the number of detectors per multiplexed readout channel compared to ACTPol and optimizing the Nyquist inductance to minimize detector and SQUID noise aliasing.
△ Less
Submitted 20 July, 2016;
originally announced July 2016.
-
Detection of the pairwise kinematic Sunyaev-Zel'dovich effect with BOSS DR11 and the Atacama Cosmology Telescope
Authors:
F. De Bernardis,
S. Aiola,
E. M. Vavagiakis,
N. Battaglia,
M. D. Niemack,
J. Beall,
D. T. Becker,
J. R. Bond,
E. Calabrese,
H. Cho,
K. Coughlin,
R. Datta,
M. Devlin,
J. Dunkley,
R. Dunner,
S. Ferraro,
A. Fox,
P. A. Gallardo,
M. Halpern,
N. Hand,
M. Hasselfield,
S. W. Henderson,
J. C. Hill,
G. C. Hilton,
M. Hilton
, et al. (33 additional authors not shown)
Abstract:
We present a new measurement of the kinematic Sunyaev-Zeldovich effect using data from the Atacama Cosmology Telescope (ACT) and the Baryon Oscillation Spectroscopic Survey (BOSS). Using 600 square degrees of overlap** sky area, we evaluate the mean pairwise baryon momentum associated with the positions of 50,000 bright galaxies in the BOSS DR11 Large Scale Structure catalog. A non-zero signal a…
▽ More
We present a new measurement of the kinematic Sunyaev-Zeldovich effect using data from the Atacama Cosmology Telescope (ACT) and the Baryon Oscillation Spectroscopic Survey (BOSS). Using 600 square degrees of overlap** sky area, we evaluate the mean pairwise baryon momentum associated with the positions of 50,000 bright galaxies in the BOSS DR11 Large Scale Structure catalog. A non-zero signal arises from the large-scale motions of halos containing the sample galaxies. The data fits an analytical signal model well, with the optical depth to microwave photon scattering as a free parameter determining the overall signal amplitude. We estimate the covariance matrix of the mean pairwise momentum as a function of galaxy separation, using microwave sky simulations, jackknife evaluation, and bootstrap estimates. The most conservative simulation-based errors give signal-to-noise estimates between 3.6 and 4.1 for varying galaxy luminosity cuts. We discuss how the other error determinations can lead to higher signal-to-noise values, and consider the impact of several possible systematic errors. Estimates of the optical depth from the average thermal Sunyaev-Zeldovich signal at the sample galaxy positions are broadly consistent with those obtained from the mean pairwise momentum signal.
△ Less
Submitted 8 March, 2017; v1 submitted 7 July, 2016;
originally announced July 2016.
-
Survey strategy optimization for the Atacama Cosmology Telescope
Authors:
F. De Bernardis,
J. R. Stevens,
M. Hasselfield,
D. Alonso,
J. R. Bond,
E. Calabrese,
S. K. Choi,
K. T. Crowley,
M. Devlin,
J. Dunkley,
P. A. Gallardo,
S. W. Henderson,
M. Hilton,
R. Hlozek,
S. P. Ho,
K. Huffenberger,
B. J. Koopman,
A. Kosowsky,
T. Louis,
M. S. Madhavacheril,
J. McMahon,
S. Naess,
F. Nati,
L. Newburgh,
M. D. Niemack
, et al. (12 additional authors not shown)
Abstract:
In recent years there have been significant improvements in the sensitivity and the angular resolution of the instruments dedicated to the observation of the Cosmic Microwave Background (CMB). ACTPol is the first polarization receiver for the Atacama Cosmology Telescope (ACT) and is observing the CMB sky with arcmin resolution over about 2000 sq. deg. Its upgrade, Advanced ACTPol (AdvACT), will ob…
▽ More
In recent years there have been significant improvements in the sensitivity and the angular resolution of the instruments dedicated to the observation of the Cosmic Microwave Background (CMB). ACTPol is the first polarization receiver for the Atacama Cosmology Telescope (ACT) and is observing the CMB sky with arcmin resolution over about 2000 sq. deg. Its upgrade, Advanced ACTPol (AdvACT), will observe the CMB in five frequency bands and over a larger area of the sky. We describe the optimization and implementation of the ACTPol and AdvACT surveys. The selection of the observed fields is driven mainly by the science goals, that is, small angular scale CMB measurements, B-mode measurements and cross-correlation studies. For the ACTPol survey we have observed patches of the southern galactic sky with low galactic foreground emissions which were also chosen to maximize the overlap with several galaxy surveys to allow unique cross-correlation studies. A wider field in the northern galactic cap ensured significant additional overlap with the BOSS spectroscopic survey. The exact shapes and footprints of the fields were optimized to achieve uniform coverage and to obtain cross-linked maps by observing the fields with different scan directions. We have maximized the efficiency of the survey by implementing a close to 24 hour observing strategy, switching between daytime and nighttime observing plans and minimizing the telescope idle time. We describe the challenges represented by the survey optimization for the significantly wider area observed by AdvACT, which will observe roughly half of the low-foreground sky. The survey strategies described here may prove useful for planning future ground-based CMB surveys, such as the Simons Observatory and CMB Stage IV surveys.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
First Results from The GlueX Experiment
Authors:
The GlueX Collaboration,
H. Al Ghoul,
E. G. Anassontzis,
F. Barbosa,
A. Barnes,
T. D. Beattie,
D. W. Bennett,
V. V. Berdnikov,
T. Black,
W. Boeglin,
W. K. Brooks,
B. Cannon,
O. Chernyshov,
E. Chudakov,
V. Crede,
M. M. Dalton,
A. Deur,
S. Dobbs,
A. Dolgolenko,
M. Dugger,
H. Egiyan,
P. Eugenio,
A. M. Foda,
J. Frye,
S. Furletov
, et al. (86 additional authors not shown)
Abstract:
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and…
▽ More
The GlueX experiment at Jefferson Lab ran with its first commissioning beam in late 2014 and the spring of 2015. Data were collected on both plastic and liquid hydrogen targets, and much of the detector has been commissioned. All of the detector systems are now performing at or near design specifications and events are being fully reconstructed, including exclusive production of $π^{0}$, $η$ and $ω$ mesons. Linearly-polarized photons were successfully produced through coherent bremsstrahlung and polarization transfer to the $ρ$ has been observed.
△ Less
Submitted 14 January, 2016; v1 submitted 11 December, 2015;
originally announced December 2015.
-
Design and Deployment of a Multichroic Polarimeter Array on the Atacama Cosmology Telescope
Authors:
R. Datta,
J. Austermann,
J. A. Beall,
D. Becker,
K. P. Coughlin,
S. M. Duff,
P. A. Gallardo,
E. Grace,
M. Hasselfield,
S. W. Henderson,
G. C. Hilton,
S. P. Ho,
J. Hubmayr,
B. J. Koopman,
J. V. Lanen,
D. Li,
J. McMahon,
C. D. Munson,
F. Nati,
M. D. Niemack,
L. Page,
C. G. Pappas,
M. Salatino,
B. L. Schmitt,
A. Schillaci
, et al. (6 additional authors not shown)
Abstract:
We present the design and the preliminary on sky performance with respect to beams and pass-bands of a multichroic polarimeter array covering the 90 and 146 GHz Cosmic Microwave Background (CMB) bands and its enabling broadband optical system recently deployed on the Atacama Cosmology Telescope (ACT). The constituent pixels are feedhorn-coupled multichroic polarimeters fabricated at NIST. This arr…
▽ More
We present the design and the preliminary on sky performance with respect to beams and pass-bands of a multichroic polarimeter array covering the 90 and 146 GHz Cosmic Microwave Background (CMB) bands and its enabling broadband optical system recently deployed on the Atacama Cosmology Telescope (ACT). The constituent pixels are feedhorn-coupled multichroic polarimeters fabricated at NIST. This array is coupled to the ACT telescope via a set of three silicon lenses incorporating novel broad-band metamaterial anti-reflection coatings. This receiver represents the first multichroic detector array deployed for a CMB experiment and paves the way for the extensive use of multichroic detectors and broadband optical systems in the next generation of CMB experiments.
△ Less
Submitted 27 October, 2015;
originally announced October 2015.
-
Advanced ACTPol Cryogenic Detector Arrays and Readout
Authors:
S. W. Henderson,
R. Allison,
J. Austermann,
T. Baildon,
N. Battaglia,
J. A. Beall,
D. Becker,
F. De Bernardis,
J. R. Bond,
E. Calabrese,
S. K. Choi,
K. P. Coughlin,
K. T. Crowley,
R. Datta,
M. J. Devlin,
S. M. Duff,
R. Dunner,
J. Dunkley,
A. van Engelen,
P. A. Gallardo,
E. Grace,
M. Hasselfield,
F. Hills,
G. C. Hilton,
A. D. Hincks
, et al. (32 additional authors not shown)
Abstract:
Advanced ACTPol is a polarization-sensitive upgrade for the 6 m aperture Atacama Cosmology Telescope (ACT), adding new frequencies and increasing sensitivity over the previous ACTPol receiver. In 2016, Advanced ACTPol will begin to map approximately half the sky in five frequency bands (28-230 GHz). Its maps of primary and secondary cosmic microwave background (CMB) anisotropies -- imaged in inten…
▽ More
Advanced ACTPol is a polarization-sensitive upgrade for the 6 m aperture Atacama Cosmology Telescope (ACT), adding new frequencies and increasing sensitivity over the previous ACTPol receiver. In 2016, Advanced ACTPol will begin to map approximately half the sky in five frequency bands (28-230 GHz). Its maps of primary and secondary cosmic microwave background (CMB) anisotropies -- imaged in intensity and polarization at few arcminute-scale resolution -- will enable precision cosmological constraints and also a wide array of cross-correlation science that probes the expansion history of the universe and the growth of structure via gravitational collapse. To accomplish these scientific goals, the Advanced ACTPol receiver will be a significant upgrade to the ACTPol receiver, including four new multichroic arrays of cryogenic, feedhorn-coupled AlMn transition edge sensor (TES) polarimeters (fabricated on 150 mm diameter wafers); a system of continuously rotating meta-material silicon half-wave plates; and a new multiplexing readout architecture which uses superconducting quantum interference devices (SQUIDs) and time division to achieve a 64-row multiplexing factor. Here we present the status and scientific goals of the Advanced ACTPol instrument, emphasizing the design and implementation of the Advanced ACTPol cryogenic detector arrays.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Isolation of Flow and Nonflow Correlations by Two- and Four-Particle Cumulant Measurements of Azimuthal Harmonics in $\sqrt{s_{_{\rm NN}}} =$ 200 GeV Au+Au Collisions
Authors:
N. M. Abdelwahab,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
J. Alford,
C. D. Anson,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
A. Banerjee,
D. R. Beavis,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
W. Borowski,
J. Bouchet
, et al. (325 additional authors not shown)
Abstract:
A data-driven method was applied to measurements of Au+Au collisions at $\sqrt{s_{_{\rm NN}}} =$ 200 GeV made with the STAR detector at RHIC to isolate pseudorapidity distance $Δη$-dependent and $Δη$-independent correlations by using two- and four-particle azimuthal cumulant measurements. We identified a component of the correlation that is $Δη$-independent, which is likely dominated by anisotropi…
▽ More
A data-driven method was applied to measurements of Au+Au collisions at $\sqrt{s_{_{\rm NN}}} =$ 200 GeV made with the STAR detector at RHIC to isolate pseudorapidity distance $Δη$-dependent and $Δη$-independent correlations by using two- and four-particle azimuthal cumulant measurements. We identified a component of the correlation that is $Δη$-independent, which is likely dominated by anisotropic flow and flow fluctuations. It was also found to be independent of $η$ within the measured range of pseudorapidity $|η|<1$. The relative flow fluctuation was found to be $34\% \pm 2\% (stat.) \pm 3\% (sys.)$ for particles of transverse momentum $p_{T}$ less than $2$ GeV/$c$. The $Δη$-dependent part may be attributed to nonflow correlations, and is found to be $5\% \pm 2\% (sys.)$ relative to the flow of the measured second harmonic cumulant at $|Δη| > 0.7$.
△ Less
Submitted 6 September, 2014;
originally announced September 2014.
-
Charged-to-neutral correlation at forward rapidity in Au+Au collisions at $\sqrt{s_{NN}}$=200 GeV
Authors:
STAR Collaboration,
N. M. Abdelwahab,
L. Adamczyk,
J. K. Adkins,
G. Agakishiev,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
J. Alford,
C. D. Anson,
A. Aparin,
D. Arkhipkin,
E. C. Aschenauer,
G. S. Averichev,
A. Banerjee,
D. R. Beavis,
R. Bellwied,
A. Bhasin,
A. K. Bhati,
P. Bhattarai,
J. Bielcik,
J. Bielcikova,
L. C. Bland,
I. G. Bordyuzhin,
W. Borowski
, et al. (326 additional authors not shown)
Abstract:
Event-by-event fluctuations of the ratio of inclusive charged to photon multiplicities at forward rapidity in Au+Au collision at $\sqrt{s_{NN}}$=200 GeV have been studied. Dominant contribution to such fluctuations is expected to come from correlated production of charged and neutral pions. We search for evidences of dynamical fluctuations of different physical origins. Observables constructed out…
▽ More
Event-by-event fluctuations of the ratio of inclusive charged to photon multiplicities at forward rapidity in Au+Au collision at $\sqrt{s_{NN}}$=200 GeV have been studied. Dominant contribution to such fluctuations is expected to come from correlated production of charged and neutral pions. We search for evidences of dynamical fluctuations of different physical origins. Observables constructed out of moments of multiplicities are used as measures of fluctuations. Mixed events and model calculations are used as baselines. Results are compared to the dynamical net-charge fluctuations measured in the same acceptance. A non-zero statistically significant signal of dynamical fluctuations is observed in excess to the model prediction when charged particles and photons are measured in the same acceptance. We find that, unlike dynamical net-charge fluctuation, charge-neutral fluctuation is not dominated by correlation due to particle decay. Results are compared to the expectations based on the generic production mechanism of pions due to isospin symmetry, for which no significant (<1%) deviation is observed.
△ Less
Submitted 21 August, 2014;
originally announced August 2014.
-
Probing Sea Quark and Gluon Polarization at STAR
Authors:
Justin R. Stevens
Abstract:
One of the primary goals of the spin program at the Relativistic Heavy Ion Collider (RHIC) is to determine the polarization of the sea quarks and gluons in the proton. The polarization of the sea quarks is probed through the production of $W^{-(+)}$ bosons via the annihilation of $\bar{u}+d\,(\bar{d}+u)$, at leading order. In this proceedings we report measurements of the single-spin asymmetry,…
▽ More
One of the primary goals of the spin program at the Relativistic Heavy Ion Collider (RHIC) is to determine the polarization of the sea quarks and gluons in the proton. The polarization of the sea quarks is probed through the production of $W^{-(+)}$ bosons via the annihilation of $\bar{u}+d\,(\bar{d}+u)$, at leading order. In this proceedings we report measurements of the single-spin asymmetry, $A_{L}$, for $W$ boson production at $\sqrt{s} = 510$ GeV, and the new constraints these results place on the antiquark helicity distributions. Recent results on the longitudinal double-spin asymmetry, $A_{LL}$, for inclusive and di-jet production at $\sqrt{s} = 200$ GeV are also presented. The inclusive jet results provide the first experimental indication of non-zero gluon polarization in the $x$ range probed at RHIC.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.