-
Scaling relations for heat and momentum transport in sheared Rayleigh-Bénard convection
Authors:
Guru Sreevanshu Yerragolam,
Christopher J. Howland,
Richard J. A. M. Stevens,
Roberto Verzicco,
Olga Shishkina,
Detlef Lohse
Abstract:
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh-Bénard convection, i.e., in Rayleigh-Bénard flow with Couette or Poiseuille type shear forcing, by extending the Grossmann & Lohse (2000,2001,2002,2004) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$, the Prandtl number $Pr$,…
▽ More
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh-Bénard convection, i.e., in Rayleigh-Bénard flow with Couette or Poiseuille type shear forcing, by extending the Grossmann & Lohse (2000,2001,2002,2004) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$, the Prandtl number $Pr$, and the Reynolds number $Re_S$ that characterises the strength of the imposed shear. By direct numerical simulations and theoretical considerations, we show that in turbulent Rayleigh-Bénard convection, the friction coefficients associated with the applied shear and the shear generated by the large-scale convection rolls are both well described by Prandtl's (1932) logarithmic friction law, suggesting some kind of universality between purely shear driven flows and thermal convection. These scaling relations hold well for $10^6 \leq Ra \leq 10^8$, $0.5 \leq Pr \leq 5.0$, and $0 \leq Re_S \leq 10^4$.
△ Less
Submitted 8 July, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Characterization of natural convection between spherical shells
Authors:
Luca Santelli,
Guiquan Wang,
Richard J. A. M. Stevens,
Roberto Verzicco
Abstract:
In this manuscript, it is analysed the onset and evolution of natural convection of an incompressible fluid between spherical shells. The shells are kept at a fixed temperature difference and aspect ratio, and the Rayleigh-Benard convection is driven by different radial gravity profiles. The analysis has been carried out by using a finite difference scheme to solve the three-dimensional Navier-Sto…
▽ More
In this manuscript, it is analysed the onset and evolution of natural convection of an incompressible fluid between spherical shells. The shells are kept at a fixed temperature difference and aspect ratio, and the Rayleigh-Benard convection is driven by different radial gravity profiles. The analysis has been carried out by using a finite difference scheme to solve the three-dimensional Navier-Stokes equations in spherical coordinates. Numerical results are compared with theoretical predictions from linear and non-linear stability analysis, and differ from the expected critical Rayleigh number Ra_c = 1708 by less than 1 percent. In the range of Prandlt numbers Pr studied, and for all the different gravity profiles analysed, the system presents a dependence on its starting condition and flow history. Even in the region just above the onset of convection, two stable states are observed, with qualitative and quantitative differences, and exploring higher values of Ra introduces new modes and time dependency phenomena in the flow. These results are corroborated by spectral analysis.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
The mean wind and potential temperature flux profiles in convective boundary layers
Authors:
Luoqin Liu,
Srinidhi N. Gadde,
Richard J. A. M. Stevens
Abstract:
We develop innovative analytical expressions for the mean wind and potential temperature flux profiles in convective boundary layers (CBLs). CBLs are frequently observed during daytime as the Earth's surface is warmed by solar radiation. Therefore, their modeling is relevant for weather forecasting, climate modeling, and wind energy applications. For CBLs in the convective-roll dominated regime, t…
▽ More
We develop innovative analytical expressions for the mean wind and potential temperature flux profiles in convective boundary layers (CBLs). CBLs are frequently observed during daytime as the Earth's surface is warmed by solar radiation. Therefore, their modeling is relevant for weather forecasting, climate modeling, and wind energy applications. For CBLs in the convective-roll dominated regime, the mean velocity and potential temperature in the bulk region of the mixed layer are approximately uniform. We propose an analytical expression for the normalized potential temperature flux profile as a function of height, using a perturbation method approach in which we employ the horizontally homogeneous and quasi-stationary characteristics of the surface and inversion layers. The velocity profile in the mixed layer and the entrainment zone is constructed based on insights obtained from the proposed potential temperature flux profile and the convective logarithmic friction law. Combining this with the well-known Monin-Obukhov similarity theory allows us to capture the velocity profile over the entire boundary layer height. The proposed profiles agree excellently with large-eddy simulation results over the range of $-L/z_0 \in [3.6\times10^2, 0.7 \times 10^5]$, where $L$ is the Obukhov length and $z_0$ is the roughness length.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
Optimal heat transport in rotating Rayleigh-Bénard convection at large Rayleigh numbers
Authors:
Robert Hartmann,
Guru S. Yerragolam,
Roberto Verzicco,
Detlef Lohse,
Richard J. A. M. Stevens
Abstract:
The heat transport in rotating Rayleigh-Bénard convection (RBC) can be significantly enhanced for moderate rotation, i.e., for an intermediate range of Rossby numbers $Ro$, compared to the non-rotating case. At Rayleigh numbers $Ra\lesssim5\cdot10^8$, the largest heat transport enhancement (HTE) is achieved when the thicknesses of kinetic and thermal boundary layer are equal. However, experimental…
▽ More
The heat transport in rotating Rayleigh-Bénard convection (RBC) can be significantly enhanced for moderate rotation, i.e., for an intermediate range of Rossby numbers $Ro$, compared to the non-rotating case. At Rayleigh numbers $Ra\lesssim5\cdot10^8$, the largest heat transport enhancement (HTE) is achieved when the thicknesses of kinetic and thermal boundary layer are equal. However, experimental and numerical observations show that, at larger $Ra$ ($\gtrsim5\cdot10^8$), the maximal HTE starts to deviate from the expected optimal boundary layer ratio and its amplitude decreases drastically. We present data from direct numerical simulations of rotating RBC in a periodic domain in the range of $10^7\leq Ra\leq10^{10}$ and $0\leq Ro^{-1}\leq40$ for Prandtl number $Pr=4.38$ and $6.4$ to identify the reason for the transition to this large $Ra$ regime of HTE. Our analysis reveals that the transition occurs once the bulk flow at the optimal boundary layer ratio changes to geostrophic turbulence for large $Ra$. In that flow state, the vertically coherent vortices, which support HTE by Ekman pum** at smaller $Ra$, dissolve into vertically decorrelated structures in the bulk, such that the enhancing effect of Ekman pum** and the influence of the boundary layer ratio become small. Additionally, more heat leaks out of the Ekman vortices as the fraction of thermal dissipation in the bulk increases. We find that the rotation induced shearing at the plates helps to increase the thermal dissipation in the bulk, and thus acts as a limiting factor for HTE at large $Ra$: beyond a certain ratio of wall shear stress to vortex strength, the heat transport decreases irrespectively of the boundary layer ratio. This $Pr$ dependent threshold, which roughly corresponds to a bulk accounting for $\approx1/3$ of the total thermal dissipation, sets the maximal HTE and the optimal rotation rate at large $Ra$.
△ Less
Submitted 4 September, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
A three-dimensional dynamic mode decomposition analysis of wind farm flow aerodynamics
Authors:
Xuan Dai,
Da Xu,
Mengqi Zhang,
Richard J. A. M. Stevens
Abstract:
High-fidelity large-eddy simulations are suitable to obtain insight into the complex flow dynamics in extended wind farms. In order to better understand these flow dynamics, we use dynamic mode decomposition (DMD) to analyze and reconstruct the flow field in large-scale numerically simulated wind farms by large-eddy simulations (LES). Different wind farm layouts are considered, and we find that a…
▽ More
High-fidelity large-eddy simulations are suitable to obtain insight into the complex flow dynamics in extended wind farms. In order to better understand these flow dynamics, we use dynamic mode decomposition (DMD) to analyze and reconstruct the flow field in large-scale numerically simulated wind farms by large-eddy simulations (LES). Different wind farm layouts are considered, and we find that a combination of horizontal and vertical staggering leads to improved wind farm performance compared to traditional horizontal staggering. We analyze the wind farm flows using the amplitude selection (AP) and sparsity-promoting (SP method) DMD approach. We find that the AP method tends to select modes with a small length scale and a high frequency, while the SP method selects large coherent structures with low frequency. The latter are somewhat reminiscent of modes obtained using proper orthogonal decomposition (POD). We find that a relatively limited number of SP-DMD modes is sufficient to accurately reconstruct the flow field in the entire wind farm, whereas the AP-DMD method requires more modes to achieve an accurate reconstruction. Thus, the SP-DMD method has a smaller performance loss compared to the AP-DMD method in terms of the reconstruction of the flow field.
△ Less
Submitted 24 April, 2022;
originally announced April 2022.
-
Evaluating the accuracy of the actuator line model against blade element momentum theory in uniform inflow
Authors:
Luoqin Liu,
Lucas Franceschini,
Daniel F. Oliveira,
Flavio C. C. Galeazzo,
Bruno S. Carmo,
Richard J. A. M. Stevens
Abstract:
We evaluate the accuracy of the actuator line model (ALM) approach by performing simulations for the NREL~5~MW wind turbine in uniform inflow using three large eddy simulation codes. The power and thrust coefficients obtained using the three codes agrees within $1\%$ when the grid spacing $Δ_{\rm grid} \le 5.25$~m, and are cross-validated against blade element momentum (BEM) theory. We find that t…
▽ More
We evaluate the accuracy of the actuator line model (ALM) approach by performing simulations for the NREL~5~MW wind turbine in uniform inflow using three large eddy simulation codes. The power and thrust coefficients obtained using the three codes agrees within $1\%$ when the grid spacing $Δ_{\rm grid} \le 5.25$~m, and are cross-validated against blade element momentum (BEM) theory. We find that the results of ALM converge towards BEM theory without the need for tip correction when the numerical resolution is increased. For $Δ_{\rm grid}=0.98$~m the difference between the power and thrust coefficient obtained using ALM and BEM is $4.5\%$ and $2.1\%$, respectively, although we note that no absolute convergence between ALM and BEM can be obtained as both models use different assumptions, such as the use of a force projection method in the ALM. The difference in the local axial and tangential forces along the blades obtained from ALM simulations using $Δ_{\rm grid} = 1.97$~m and $Δ_{\rm grid} = 0.98$~m can be as large as $10\%$. The effect of the number of actuator points on the obtained turbine power and thrust coefficients is limited as the results converge when the spacing between the actuator points is about three times the grid spacing. This insight on the required number of blade points can be used to improve the efficiency of actuator line simulations.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Comment on "Flexibility of short DNA helices with finite-length effect: From base pairs to tens of base pairs"
Authors:
Midas Segers,
Enrico Skoruppa,
Jan A. Stevens,
Merijn Vangilbergen,
Aderik Voorspoels,
Enrico Carlon
Abstract:
While analyzing the persistence length of DNA atomistic simulations Wu et al. [J. Chem. Phys. 142, 125103 (2015)] introduced an empirical formula to account for the observed length-dependence. In particular they found that the persistence length increases with the distance. Here, we derive the formula by Wu et al. using a non-local twistable wormlike chain which introduces couplings between distal…
▽ More
While analyzing the persistence length of DNA atomistic simulations Wu et al. [J. Chem. Phys. 142, 125103 (2015)] introduced an empirical formula to account for the observed length-dependence. In particular they found that the persistence length increases with the distance. Here, we derive the formula by Wu et al. using a non-local twistable wormlike chain which introduces couplings between distal sites. Finally, we show that the same formula can account for the length-scale dependence of the torsional persistence length and is, in fact, applicable to any kind of polymer model with non-local couplings.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Enhanced wind-farm performance using windbreaks
Authors:
Luoqin Liu,
Richard J. A. M. Stevens
Abstract:
The flow speed-up generated by windbreaks can be used to increase the power production of wind turbines. However, due to the increased drag imposed by the windbreaks, their use in large wind turbine arrays has been questioned. We use large eddy simulations to show that windbreaks can increase the power production of large wind farms. A crucial finding is that windbreaks in a wind farm should be mu…
▽ More
The flow speed-up generated by windbreaks can be used to increase the power production of wind turbines. However, due to the increased drag imposed by the windbreaks, their use in large wind turbine arrays has been questioned. We use large eddy simulations to show that windbreaks can increase the power production of large wind farms. A crucial finding is that windbreaks in a wind farm should be much lower than for a single turbine case. In fact, the optimal windbreak for an isolated turbine can reduce wind farm performance. The optimal windbreak height in a wind farm namely depends on the right balance between flow speed-up over the windbreak and the drag imposed by all windbreaks in the farm. The increased performance is a result of the favorable total pressure flux created by the windbreaks.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
Strong alignment of prolate ellipsoids in Taylor-Couette flow
Authors:
Martin P. A. Assen,
Chong Shen Ng,
Jelle B. Will,
Richard J. A. M. Stevens,
Detlef Lohse,
Roberto Verzicco
Abstract:
We report on the mobility and orientation of finite-size, neutrally buoyant prolate ellipsoids (of aspect ratio $Λ=4$) in Taylor-Couette flow, using interface resolved numerical simulations. The setup consists of a particle-laden flow in between a rotating inner and a stationary outer cylinder. We simulate two particle sizes $\ell/d=0.1$ and $\ell/d=0.2$, $\ell$ denoting the particle major axis an…
▽ More
We report on the mobility and orientation of finite-size, neutrally buoyant prolate ellipsoids (of aspect ratio $Λ=4$) in Taylor-Couette flow, using interface resolved numerical simulations. The setup consists of a particle-laden flow in between a rotating inner and a stationary outer cylinder. We simulate two particle sizes $\ell/d=0.1$ and $\ell/d=0.2$, $\ell$ denoting the particle major axis and $d$ the gap-width between the cylinders. The volume fractions are $0.01\%$ and $0.07\%$, respectively. The particles, which are initially randomly positioned, ultimately display characteristic spatial distributions which can be categorised into four modes. Modes $(i)$ to $(iii)$ are observed in the Taylor vortex flow regime, while mode ($iv$) encompasses both the wavy vortex, and turbulent Taylor vortex flow regimes. Mode $(i)$ corresponds to stable orbits away from the vortex cores. Remarkably, in a narrow $\textit{Ta}$ range, particles get trapped in the Taylor vortex cores (mode ($ii$)). Mode $(iii)$ is the transition when both modes $(i)$ and $(ii)$ are observed. For mode $(iv)$, particles distribute throughout the domain due to flow instabilities. All four modes show characteristic orientational statistics. We find the particle clustering for mode ($ii$) to be size-dependent, with two main observations. Firstly, particle agglomeration at the core is much higher for $\ell/d=0.2$ compared to $\ell/d=0.1$. Secondly, the $\textit{Ta}$ range for which clustering is observed depends on the particle size. For this mode $(ii)$ we observe particles to align strongly with the local cylinder tangent. The most pronounced particle alignment is observed for $\ell/d=0.2$ around $\textit{Ta}=4.2\times10^5$. This observation is found to closely correspond to a minimum of axial vorticity at the Taylor vortex core ($\textit{Ta}=6\times10^5$) and we explain why.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Off-center gravity induces large-scale flow patterns in spherical Rayleigh-Bénard
Authors:
Guiquan Wang,
Luca Santelli,
Roberto Verzicco,
Detlef Lohse,
Richard J. A. M. Stevens
Abstract:
Inspired by the hemispherical asymmetry observed in the Earth's inner core, we perform direct numerical simulations to study the effect of the gravity center offset in spherical Rayleigh-Bénard convection. We find that even a minimal shift of the gravity center has a pronounced influence on the flow structures. When the gravity center is shifted towards the South, the co-latitudinal buoyancy compo…
▽ More
Inspired by the hemispherical asymmetry observed in the Earth's inner core, we perform direct numerical simulations to study the effect of the gravity center offset in spherical Rayleigh-Bénard convection. We find that even a minimal shift of the gravity center has a pronounced influence on the flow structures. When the gravity center is shifted towards the South, the co-latitudinal buoyancy component creates an energetic jet on the Northern side of the inner sphere that is directed towards the outer sphere. As a result, a large-scale meridional circulation is formed. However, surprisingly, the global heat flux is not affected by the changes in the large-scale flow organization induced by the gravity center offset. Our results suggest that the hemispherical core asymmetry is key to model the flow phenomena in the Earth's outer core and mantle.
△ Less
Submitted 8 May, 2021;
originally announced May 2021.
-
Diffusion-free scaling in rotating spherical Rayleigh-Bénard convection
Authors:
Guiquan Wang,
Luca Santelli,
Detlef Lohse,
Roberto Verzicco,
Richard J. A. M. Stevens
Abstract:
Direct numerical simulations are employed to reveal three distinctly different flow regions in rotating spherical Rayleigh-Bénard convection. In the low-latitude region $\mathrm{I}$ vertical (parallel to the axis of rotation) convective columns are generated between the hot inner and the cold outer sphere. The mid-latitude region $\mathrm{II}$ is dominated by vertically aligned convective columns…
▽ More
Direct numerical simulations are employed to reveal three distinctly different flow regions in rotating spherical Rayleigh-Bénard convection. In the low-latitude region $\mathrm{I}$ vertical (parallel to the axis of rotation) convective columns are generated between the hot inner and the cold outer sphere. The mid-latitude region $\mathrm{II}$ is dominated by vertically aligned convective columns formed between the Northern and Southern hemispheres of the outer sphere. The diffusion-free scaling, which indicates bulk-dominated convection, originates from this mid-latitude region. In the equator region $\mathrm{III}$ the vortices are affected by the outer spherical boundary and are much shorter than in region $\mathrm{II}$.
Thermally driven turbulence with background rotation in spherical Rayleigh-Bénard convection is found to be characterized by three distinctly different flow regions. The diffusion-free scaling, which indicates the heat transfer is bulk-dominated, originates from the mid-latitude region in which vertically aligned vortices are stretched between the Northern and Southern hemispheres of the outer sphere.\ These results show that the flow physics in rotating convection are qualitatively different in planar and spherical geometries. This finding underlines that it is crucial to study convection in spherical geometries to better understand geophysical and astrophysical flow phenomena.
△ Less
Submitted 6 October, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Universal Wind Profile for Conventionally Neutral Atmospheric Boundary Layers
Authors:
Luoqin Liu,
Srinidhi N. Gadde,
Richard J. A. M. Stevens
Abstract:
Conventionally neutral atmospheric boundary layers (CNBLs), which are characterized with zero surface potential temperature flux and capped by an inversion of potential temperature, are frequently encountered in nature. Therefore, predicting the wind speed profiles of CNBLs is relevant for weather forecasting, climate modeling, and wind energy applications. However, previous attempts to predict th…
▽ More
Conventionally neutral atmospheric boundary layers (CNBLs), which are characterized with zero surface potential temperature flux and capped by an inversion of potential temperature, are frequently encountered in nature. Therefore, predicting the wind speed profiles of CNBLs is relevant for weather forecasting, climate modeling, and wind energy applications. However, previous attempts to predict the velocity profiles in CNBLs have had limited success due to the complicated interplay between buoyancy, shear, and Coriolis effects. Here, we utilize ideas from the classical Monin-Obukhov similarity theory in combination with a local scaling hypothesis to derive an analytic expression for the stability correction function $ψ= -c_ψ(z/L)^{1/2}$, where $c_ψ= 4.2$ is an empirical constant, $z$ is the height above ground, and $L$ is the local Obukhov length based on potential temperature flux at that height, for CNBLs. An analytic expression for this flux is also derived using dimensional analysis and a perturbation method approach. We find that the derived profile agrees excellently with the velocity profile in the entire boundary layer obtained from high-fidelity large eddy simulations of typical CNBLs.
△ Less
Submitted 10 February, 2021; v1 submitted 9 February, 2021;
originally announced February 2021.
-
Effect of low-level jet height on wind farm performance
Authors:
Srinidhi N. Gadde,
Richard J. A. M. Stevens
Abstract:
Low-level jets (LLJs) are the wind maxima in the lowest 50 to 1000 m of atmospheric boundary layers. Due to their significant influence on the power production of wind farms it is crucial to understand the interaction between LLJs and wind farms. In the presence of an LLJ, there are positive and negative shear regions in the velocity profile. The positive shear regions of LLJs are continuously tur…
▽ More
Low-level jets (LLJs) are the wind maxima in the lowest 50 to 1000 m of atmospheric boundary layers. Due to their significant influence on the power production of wind farms it is crucial to understand the interaction between LLJs and wind farms. In the presence of an LLJ, there are positive and negative shear regions in the velocity profile. The positive shear regions of LLJs are continuously turbulent, while the negative shear regions have limited turbulence. We present large-eddy simulations of wind farms in which the LLJ is above, below, or in the middle of the turbine rotor swept area. We find that the wakes recover relatively fast when the LLJ is above the turbines. This is due to the high turbulence below the LLJ and the downward vertical entrainment created by the momentum deficit due to the wind farm power production. This harvests the jet's energy and aids wake recovery. However, when the LLJ is below the turbine rotor swept area, the wake recovery is very slow due to the low atmospheric turbulence above the LLJ. The energy budget analysis reveals that the entrainment fluxes are maximum and minimum when the LLJ is above and in the middle of the turbine rotor swept area, respectively. Surprisingly, we find that the negative shear creates a significant entrainment flux upward when the LLJ is below the turbine rotor swept area. This facilitates energy extraction from the jet, which is beneficial for the performance of downwind turbines.
△ Less
Submitted 17 January, 2021;
originally announced January 2021.
-
The effect of Prandtl number on turbulent sheared thermal convection
Authors:
Alexander Blass,
Pier Tabak,
Roberto Verzicco,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
In turbulent wall sheared thermal convection, there are three different flow regimes, depending on the relative relevance of thermal forcing and wall shear. In this paper we report the results of direct numerical simulations of such sheared Rayleigh-Bénard convection, at fixed Rayleigh number $Ra=10^6$, varying the wall Reynolds number in the range $0 \leq Re_w \leq 4000$ and Prandtl number…
▽ More
In turbulent wall sheared thermal convection, there are three different flow regimes, depending on the relative relevance of thermal forcing and wall shear. In this paper we report the results of direct numerical simulations of such sheared Rayleigh-Bénard convection, at fixed Rayleigh number $Ra=10^6$, varying the wall Reynolds number in the range $0 \leq Re_w \leq 4000$ and Prandtl number $0.22 \leq Pr \leq 4.6$, extending our prior work by Blass et al. (2020), where $Pr$ was kept constant at unity and the thermal forcing ($Ra$) varied. We cover a wide span of bulk Richardson numbers $0.014 \leq Ri \leq 100$ and show that the Prandtl number strongly influences the morphology and dynamics of the flow structures. In particular, at fixed $Ra$ and $Re_w$, a high Prandtl number causes stronger momentum transport from the walls and therefore yields a greater impact of the wall shear on the flow structures, resulting in an increased effect of $Re_w$ on the Nusselt number. Furthermore, we analyse the thermal and kinetic boundary layer thicknesses and relate their behaviour to the resulting flow regimes. For the largest shear rates and $Pr$ numbers, we observe the emergence of a Prandtl-von Karman log-layer, signalling the onset of turbulent dynamics in the boundary layer. Finally, our results allow to extend the Grossmann-Lohse theory for heat transport in Rayleigh-Bénard convection to the sheared case, universally describing $Nu(Ra,Pr,Re_w)$.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Wall modeled immersed boundary method for high Reynolds number flow over complex terrain
Authors:
Luoqin Liu,
Richard J. A. M. Stevens
Abstract:
Modeling the effect of complex terrain on high Reynolds number flows is important to improve our understanding of flow dynamics in wind farms and the dispersion of pollen and pollutants in hilly or mountainous terrain as well as the flow in urban areas. Unfortunately, simulating high Reynolds number flows over complex terrain is still a big challenge. Therefore, we present a simplified version of…
▽ More
Modeling the effect of complex terrain on high Reynolds number flows is important to improve our understanding of flow dynamics in wind farms and the dispersion of pollen and pollutants in hilly or mountainous terrain as well as the flow in urban areas. Unfortunately, simulating high Reynolds number flows over complex terrain is still a big challenge. Therefore, we present a simplified version of the wall modeled immersed boundary method by Chester et al. (J. Comput. Phys. 2007; 225: 427-448). By preventing the extrapolation and iteration steps in the original method, the proposed approach is much easier to implement and more computationally efficient. Furthermore, the proposed method only requires information that is available to each processor and thus is much more efficient for simulations performed on a large number of cores. These are crucial considerations for algorithms that are deployed on modern supercomputers and will allow much higher grid resolutions to be considered. We validate our method against wind tunnel measurements for turbulent flows over wall-mounted cubes, a two dimensional ridge, and a three-dimensional hill. We find very good agreement between the simulation results and the measurement data, which shows this method is suitable to model high Reynolds number flows over complex terrain.
△ Less
Submitted 5 June, 2020;
originally announced June 2020.
-
Flow organization in laterally unconfined Rayleigh-Bénard turbulence
Authors:
Alexander Blass,
Roberto Verzicco,
Detlef Lohse,
Richard J. A. M. Stevens,
Dominik Krug
Abstract:
We investigate the large-scale circulation (LSC) of turbulent Rayleigh-Bénard convection in a large box of aspect ratio $Γ=32$ for Rayleigh numbers up to $Ra=10^9$ and at a fixed Prandtl number $Pr=1$. A conditional averaging technique allows us to extract statistics of the LSC even though the number and the orientation of the structures vary throughout the domain. We find that various properties…
▽ More
We investigate the large-scale circulation (LSC) of turbulent Rayleigh-Bénard convection in a large box of aspect ratio $Γ=32$ for Rayleigh numbers up to $Ra=10^9$ and at a fixed Prandtl number $Pr=1$. A conditional averaging technique allows us to extract statistics of the LSC even though the number and the orientation of the structures vary throughout the domain. We find that various properties of the LSC obtained here, such as the wall-shear stress distribution, the boundary layer thicknesses and the wind Reynolds number, do not differ significantly from results in confined domains ($Γ\approx 1$). This is remarkable given that the size of the structures (as measured by the width of a single convection roll) more than doubles at the highest $Ra$ as the confinement is removed. An extrapolation towards the critical shear Reynolds number of $Re_s^{\textrm{crit}} \approx 420$, at which the boundary layer (BL) typically becomes turbulent, predicts that the transition to the ultimate regime is expected at $Ra_{\textrm{crit}} \approx \mathcal{O}(10^{15})$ in unconfined geometries. This result is in line with the Göttingen experimental observations. Furthermore, we confirm that the local heat transport close to the wall is highest in the plume impacting region, where the thermal BL is thinnest, and lowest in the plume emitting region, where the thermal BL is thickest. This trend, however, weakens with increasing $Ra$.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
From Rayleigh-Bénard convection to porous-media convection: how porosity affects heat transfer and flow structure
Authors:
Shuang Liu,
Linfeng Jiang,
Kai Leong Chong,
Xiaojue Zhu,
Zhen-Hua Wan,
Roberto Verzicco,
Richard J. A. M. Stevens,
Detlef Lohse,
Chao Sun
Abstract:
We perform a numerical study of the heat transfer and flow structure of Rayleigh-Bénard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity $φ$ in the flow properties during the transition process from the traditional RB convection with $φ=1$ (so no obstacles included) t…
▽ More
We perform a numerical study of the heat transfer and flow structure of Rayleigh-Bénard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity $φ$ in the flow properties during the transition process from the traditional RB convection with $φ=1$ (so no obstacles included) to Darcy-type porous-media convection with $φ$ approaching 0. Simulations are carried out in a cell with unity aspect ratio, for the Rayleigh number $Ra$ from $10^5$ to $10^{10}$ and varying porosities $φ$, at a fixed Prandtl number $Pr=4.3$, and we restrict ourselves to the two dimensional case. For fixed $Ra$, the Nusselt number $Nu$ is found to vary non-monotonously as a function of $φ$; namely, with decreasing $φ$, it first increases, before it decreases for $φ$ approaching 0. The non-monotonous behaviour of $Nu(φ)$ originates from two competing effects of the porous structure on the heat transfer. On the one hand, the flow coherence is enhanced in the porous media, which is beneficial for the heat transfer. On the other hand, the convection is slowed down by the enhanced resistance due to the porous structure, leading to heat transfer reduction. For fixed $φ$, depending on $Ra$, two different heat transfer regimes are identified, with different effective power-law behaviours of $Nu$ vs $Ra$, namely, a steep one for low $Ra$ when viscosity dominates, and the standard classical one for large $Ra$. The scaling crossover occurs when the thermal boundary layer thickness and the pore scale are comparable. The influences of the porous structure on the temperature and velocity fluctuations, convective heat flux, and energy dissipation rates are analysed, further demonstrating the competing effects of the porous structure to enhance or reduce the heat transfer.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Towards DNS of the Ultimate Regime of Rayleigh--Bénard Convection
Authors:
Richard J. A. M. Stevens,
Detlef Lohse,
Roberto Verzicco
Abstract:
In this contribution we have briefly introduced the problem of turbulent thermal convection with a particular look at its transition to the ultimate regime and the resolution requirements needed for the direct numerical simulation of this flow.
In this contribution we have briefly introduced the problem of turbulent thermal convection with a particular look at its transition to the ultimate regime and the resolution requirements needed for the direct numerical simulation of this flow.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
From zonal flow to convection rolls in Rayleigh-Bénard convection with free-slip plates
Authors:
Qi Wang,
Kai Leong Chong,
Richard J. A. M. Stevens,
Roberto Verzicco,
Detlef Lohse
Abstract:
Rayleigh-Bénard (RB) convection with free-slip plates and horizontally periodic boundary conditions is investigated using direct numerical simulations. Two configurations are considered, one is two-dimension (2D) RB convection and the other one three-dimension (3D) RB convection with a rotating axis parallel to the plate. We explore the parameter range of Rayleigh numbers Ra from $10^7 to $10^9…
▽ More
Rayleigh-Bénard (RB) convection with free-slip plates and horizontally periodic boundary conditions is investigated using direct numerical simulations. Two configurations are considered, one is two-dimension (2D) RB convection and the other one three-dimension (3D) RB convection with a rotating axis parallel to the plate. We explore the parameter range of Rayleigh numbers Ra from $10^7 to $10^9$ and Prandtl numbers $Pr$ from $1$ to $100$. We show that zonal flow, which was observed, for example, by Goluskin \emph{et al}. \emph{J. Fluid. Mech.} 759, 360-385 (2014) for $Γ=2$, is only stable when $Γ$ is smaller than a critical value, which depends on $Ra$ and $Pr$. With increasing $Γ$, we find a second regime in which both zonal flow and different convection roll states can be statistically stable. For even larger $Γ$, in a third regime, only convection roll states are statistically stable and zonal flow is not sustained. For the 3D simulations, we fix $Ra=10^7$ and $Pr=0.71$, and compare the flow for
$Γ=8$ and $Γ= 16$. We demonstrate that with increasing aspect ratio $Γ$, zonal flow, which was observed for small $Γ=2π$ by von Hardenberg \emph{et al}. \emph{Phys. Rev. Lett.} 15, 134501 (2015), completely disappears for $Γ=16$. For such large $Γ$ only convection roll states are statistically stable. In between, here for medium aspect ratio $Γ= 8$, the convection roll state and the zonal flow state are both statistically stable. What state is taken depends on the initial conditions, similarly as we found for the 2D case.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
What rotation rate maximizes heat transport in rotating Rayleigh-Bénard convection with Prandtl number larger than one?
Authors:
Yantao Yang,
Roberto Verzicco,
Detlef Lohse,
Richard J. A. M. Stevens
Abstract:
The heat transfer and flow structure in rotating Rayleigh-Bénard convection are strongly influenced by the Rayleigh ($Ra$), Prandtl ($Pr$), and Rossby ($Ro$) number. For $Pr\gtrsim 1$ and intermediate rotation rates, the heat transfer is increased compared to the non-rotating case. We find that the regime of increased heat transfer is subdivided into a low and a high $Ra$ number regime. For…
▽ More
The heat transfer and flow structure in rotating Rayleigh-Bénard convection are strongly influenced by the Rayleigh ($Ra$), Prandtl ($Pr$), and Rossby ($Ro$) number. For $Pr\gtrsim 1$ and intermediate rotation rates, the heat transfer is increased compared to the non-rotating case. We find that the regime of increased heat transfer is subdivided into a low and a high $Ra$ number regime. For $Ra\lesssim 5\times10^8$ the heat transfer at a given $Ra$ and $Pr$ is highest at an optimal rotation rate, at which the thickness of the viscous and thermal boundary layer is about equal. From the scaling relations of the thermal and viscous boundary layer thicknesses, we derive that the optimal rotation rate scales as $1/Ro_\mathrm{opt} \approx 0.12 Pr^{1/2}Ra^{1/6}$. In the low $Ra$ regime the heat transfer is similar in a periodic domain and cylindrical cells with different aspect ratios, i.e.\ the ratio of diameter to height. This is consistent with the view that the vertically aligned vortices are the dominant flow structure. For $Ra\gtrsim 5\times10^8$ the above scaling for the optimal rotation rate does not hold anymore. It turns out that in the high $Ra$ regime, the flow structures at the optimal rotation rate are very different than for lower $Ra$. Surprisingly, the heat transfer in the high $Ra$ regime differs significantly for a periodic domain and cylindrical cells with different aspect ratios, which originates from the sidewall boundary layer dynamics and the corresponding secondary circulation.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Calculation of the mean velocity profile for strongly turbulent Taylor--Couette flow and arbitrary radius ratios
Authors:
Pieter Berghout,
Roberto Verzicco,
Richard J. A. M. Stevens,
Detlef Lohse,
Daniel Chung
Abstract:
Taylor--Couette (TC) flow is the shear-driven flow between two coaxial independently rotating cylinders. In recent years, high-fidelity simulations and experiments revealed the shape of the streamwise and angular velocity profiles up to very high Reynolds numbers. However, due to curvature effects, so far no theory has been able to correctly describe the turbulent streamwise velocity profile for g…
▽ More
Taylor--Couette (TC) flow is the shear-driven flow between two coaxial independently rotating cylinders. In recent years, high-fidelity simulations and experiments revealed the shape of the streamwise and angular velocity profiles up to very high Reynolds numbers. However, due to curvature effects, so far no theory has been able to correctly describe the turbulent streamwise velocity profile for given radius ratio, as the classical Prandtl--von Kármán logarithmic law for turbulent boundary layers over a flat surface at most fits in a limited spatial region.
Here we address this deficiency by applying the idea of a Monin--Obukhov curvature length to turbulent TC flow. This length separates the flow regions where the production of turbulent kinetic energy is governed by pure shear from that where it acts in combination with the curvature of the streamlines. We demonstrate that for all Reynolds numbers and radius ratios, the mean streamwise and angular velocity profiles collapse according to this separation. We then derive the functional form of the velocity profile. Finally, we match the newly derived angular velocity profile with the constant angular momentum profile at the height of the boundary layer, to obtain the dependence of the torque on the Reynolds number, or, in other words, of the generalized Nusselt number (i.e., the dimensionless angular velocity transport) on the Taylor number.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Interaction between low-level jets and wind farms in a stable atmospheric boundary layer
Authors:
Srinidhi Nagarada Gadde,
Richard J. A. M. Stevens
Abstract:
Low-level jets (LLJs) are the wind maxima in the lower regions of the atmosphere with a high wind energy potential. Here we use large-eddy simulations to study the effect of LLJ height on the flow dynamics in a wind farm with $10\times4$ turbines. We change the LLJ height and atmospheric thermal stratification by varying the surface cooling rate. We find that the first row power production is high…
▽ More
Low-level jets (LLJs) are the wind maxima in the lower regions of the atmosphere with a high wind energy potential. Here we use large-eddy simulations to study the effect of LLJ height on the flow dynamics in a wind farm with $10\times4$ turbines. We change the LLJ height and atmospheric thermal stratification by varying the surface cooling rate. We find that the first row power production is higher in the presence of a LLJ compared to a neutral reference case without LLJ. Besides, we show that the first row power production increases with decreasing LLJ height. Due to the higher turbulence intensity, the wind turbine wakes recover faster in a neutral boundary layer than in a stably stratified one. However, for strong thermal stratification with a low-height LLJ, the wake recovery can be faster than for the neutral reference case as energy can be entrained from the LLJ. Flow visualizations reveal that under stable stratification the growth of wind farm's internal boundary layer is restricted and the wind flows around the wind farm. Wind farms extract energy from LLJs through wake meandering and turbulent entrainment depending on the LLJ height. Both effects are advantageous for wake recovery, which is beneficial for the performance of downwind turbines. This finding is confirmed by an energy budget analysis, which reveals a significant increase in the kinetic energy flux in the presence of a LLJ. The jet strength reduces as it passes through consecutive turbine rows. For strong stratification, the combined effect of buoyancy destruction and turbulence dissipation is larger than the turbulent entrainment. Therefore, the power production of turbines in the back of the wind farm is relatively low for strong atmospheric stratifications.
△ Less
Submitted 11 December, 2020; v1 submitted 31 January, 2020;
originally announced January 2020.
-
Reply to "Absence of Evidence for the Ultimate Regime in Two-Dimensional Rayleigh-Bénard Convection"
Authors:
Xiaojue Zhu,
Varghese Mathai,
Richard J. A. M. Stevens,
Roberto Verzicco,
Detlef Lohse
Abstract:
Rely to the comment by Doering et al. in Phys. Rev. Lett. 123, 259401 (2019)
Rely to the comment by Doering et al. in Phys. Rev. Lett. 123, 259401 (2019)
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Coherence of temperature and velocity superstructures in turbulent Rayleigh-Bénard flow
Authors:
Dominik Krug,
Detlef Lohse,
Richard J. A. M. Stevens
Abstract:
We investigate the interplay between large-scale patterns, so-called superstructures, in the fluctuation fields of temperature $θ$ and vertical velocity $w$ in turbulent Rayleigh-Bénard convection at large aspect ratios. Earlier studies suggested that velocity superstructures were smaller than their thermal counterparts in the center of the domain. However, a scale-by-scale analysis of the correla…
▽ More
We investigate the interplay between large-scale patterns, so-called superstructures, in the fluctuation fields of temperature $θ$ and vertical velocity $w$ in turbulent Rayleigh-Bénard convection at large aspect ratios. Earlier studies suggested that velocity superstructures were smaller than their thermal counterparts in the center of the domain. However, a scale-by-scale analysis of the correlation between the two fields employing the linear coherence spectrum reveals that superstructures of the same size exist in both fields, which are almost perfectly correlated. The issue is further clarified by the observation that in contrast to the temperature, and unlike assumed previously, superstructures in the vertical velocity field do not result in a peak in the power spectrum of $w$. The origin of this difference is traced back to the production terms of the $θ$- and $w$-variance. These results are confirmed for a range of Rayleigh numbers $Ra = 10^5$--$10^9$, the superstructure size is seen to increase monotonically with $Ra$. Furthermore, the scale distribution of particularly the temperature fluctuations is pronouncedly bimodal. In addition to the large-scale peak caused by the superstructures, there exists a strong small-scale peak. This `inner peak' is most intense at a distance of $δ_θ$ from the wall and associated with structures of size $\approx 10 δ_θ$, where $δ_θ$ is the thermal boundary layer thickness. Finally, based on the vertical coherence relative to a reference height of $δ_θ$, a self-similar structure is identified in the velocity field (vertical and horizontal components) but not in the temperature.
△ Less
Submitted 13 December, 2019; v1 submitted 27 August, 2019;
originally announced August 2019.
-
Sharp transitions in rotating turbulent convection: Lagrangian acceleration statistics reveal a second critical Rossby number
Authors:
Kim M. J. Alards,
Rudie P. J. Kunnen,
Richard J. A. M. Stevens,
Detlef Lohse,
Federico Toschi.,
Herman J. H. Clercx
Abstract:
In RB convection for fluids with Prandtl number $Pr\gtrsim 1$, rotation beyond a critical (small) rotation rate is known to cause a sudden enhancement of heat transfer which can be explained by a change in the character of the BL dynamics near the top and bottom plates of the convection cell. Namely, with increasing rotation rate, the BL signature suddenly changes from Prandtl--Blasius type to Ekm…
▽ More
In RB convection for fluids with Prandtl number $Pr\gtrsim 1$, rotation beyond a critical (small) rotation rate is known to cause a sudden enhancement of heat transfer which can be explained by a change in the character of the BL dynamics near the top and bottom plates of the convection cell. Namely, with increasing rotation rate, the BL signature suddenly changes from Prandtl--Blasius type to Ekman type. The transition from a constant heat transfer to an almost linearly increasing heat transfer with increasing rotation rate is known to be sharp and the critical Rossby number $Ro_{c}$ occurs typically in the range $2.3\lesssim Ro_{c}\lesssim 2.9$ (for Rayleigh number $Ra=1.3\times 10^9$, $Pr=6.7$, and a convection cell with aspect ratio $Γ=\frac{D}{H}=1$, with $D$ the diameter and $H$ the height of the cell). The explanation of the sharp transition in the heat transfer points to the change in the dominant flow structure. At $1/Ro\lesssim 1/Ro_c$ (slow rotation), the well-known LSC is found: a single domain-filling convection roll made up of many individual thermal plumes. At $1/Ro\gtrsim 1/Ro_c$ (rapid rotation), the LSC vanishes and is replaced with a collection of swirling plumes that align with the rotation axis. In this paper, by numerically studying Lagrangian acceleration statistics, related to the small-scale properties of the flow structures, we reveal that this transition between these different dominant flow structures happens at a second critical Rossby number, $Ro_{c_2}\approx 2.25$ (different from $Ro_{c_1}\approx 2.7$ for the sharp transition in the Nusselt number $Nu$; both values for the parameter settings of our present numerical study). When statistical data of Lagrangian tracers near the top plate are collected, it is found that the root-mean-square (rms) values and the kurtosis of the horizontal acceleration of these tracers show a sudden increase at $Ro_{c_2}$.
△ Less
Submitted 4 July, 2019;
originally announced July 2019.
-
Flow organization and heat transfer in turbulent wall sheared thermal convection
Authors:
Alexander Blass,
Xiaojue Zhu,
Roberto Verzicco,
Detlef Lohse,
Richard J. A. M. Stevens
Abstract:
We perform direct numerical simulations of wall sheared Rayleigh-Bénard (RB) convection for Rayleigh numbers up to $Ra=10^8$, Prandtl number unity, and wall shear Reynolds numbers up to $Re_w=10000$. Using the Monin-Obukhov length $L_{MO}$ we identify three different flow states, a buoyancy dominated regime ($L_{MO} \lesssim λ_θ$; with $λ_θ$ the thermal boundary layer thickness), a transitional re…
▽ More
We perform direct numerical simulations of wall sheared Rayleigh-Bénard (RB) convection for Rayleigh numbers up to $Ra=10^8$, Prandtl number unity, and wall shear Reynolds numbers up to $Re_w=10000$. Using the Monin-Obukhov length $L_{MO}$ we identify three different flow states, a buoyancy dominated regime ($L_{MO} \lesssim λ_θ$; with $λ_θ$ the thermal boundary layer thickness), a transitional regime ($0.5H \gtrsim L_{MO} \gtrsim λ_θ$; with $H$ the height of the domain), and a shear dominated regime ($L_{MO} \gtrsim 0.5H$). In the buoyancy dominated regime the flow dynamics are similar to that of turbulent thermal convection. The transitional regime is characterized by rolls that are increasingly elongated with increasing shear. The flow in the shear dominated regime consists of very large-scale meandering rolls, similar to the ones found in conventional Couette flow. As a consequence of these different flow regimes, for fixed $Ra$ and with increasing shear, the heat transfer first decreases, due to the breakup of the thermal rolls, and then increases at the beginning of the shear dominated regime. For $L_{MO} \gtrsim 0.5H$ the Nusselt number $Nu$ effectively scales as $Nu \sim Ra^α$, with $α\ll 1/3$ while we find $α\simeq 0.31$ in the buoyancy dominated regime. In the transitional regime the effective scaling exponent is $α> 1/3$, but the temperature and velocity profiles in this regime are not logarithmic yet, thus indicating transient dynamics and not the ultimate regime of thermal convection.
△ Less
Submitted 23 September, 2019; v1 submitted 25 April, 2019;
originally announced April 2019.
-
Direct numerical simulations of Taylor--Couette turbulence: the effect of sand grain roughness
Authors:
Pieter Berghout,
Xiaojue Zhu,
Daniel Chung,
Roberto Verzicco,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
Progress in roughness research, map** any given roughness geometry to its fluid dynamic behaviour, has been hampered by the lack of accurate and direct measurements of skin-friction drag, especially in open systems. The Taylor--Couette (TC) system has the benefit of being a closed system, but its potential for characterizing irregular, realistic, 3-D roughness has not been previously considered…
▽ More
Progress in roughness research, map** any given roughness geometry to its fluid dynamic behaviour, has been hampered by the lack of accurate and direct measurements of skin-friction drag, especially in open systems. The Taylor--Couette (TC) system has the benefit of being a closed system, but its potential for characterizing irregular, realistic, 3-D roughness has not been previously considered in depth. Here, we present direct numerical simulations (DNSs) of TC turbulence with sand grain roughness mounted on the inner cylinder. The model proposed by Scotti (\textit{Phys. Fluids}, vol. 18, 031701, 2006) has been improved to simulate a random rough surface of monodisperse sand grains, which is characterized by the equivalent sand grain height $k_s$. Taylor numbers range from $Ta = 1.0\times 10^7$(corresponding to $Re_τ= 82$) to $Ta = 1.0\times 10^9$($Re_τ= 635$). We focus on the influence of the roughness height $k_s^+$ in the transitionally rough regime, through simulations of TC with rough surfaces, ranging from $k_s^+=5$ up to $k_s^+ = 92$, where the superscript `$+$' indicates non-dimensionalization in viscous units. We find that the downwards shift of the logarithmic layer, due to transitionally rough sand grains exhibits remarkably similar behavior to that of the Nikuradse (\textit{VDI-Forschungsheft} 361, 1933) data of sand grain roughness in pipe flow, regardless of the Taylor number dependent constants of the logarithmic layer.
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
AzTEC 1.1 mm observations of high-z protocluster environments: SMG overdensities and misalignment between AGN jets and SMG distribution
Authors:
M. Zeballos,
I. Aretxaga,
D. H. Hughes,
A. Humphrey,
G. W. Wilson,
J. Austermann,
J. S. Dunlop,
H. Ezawa,
D. Ferrusca,
B. Hatsukade,
R. J. Ivison,
R. Kawabe,
S. Kim,
T. Kodama,
K. Kohno,
A. Montaña,
K. Nakanishi,
M. Plionis,
D. Sánchez-Argüelles,
J. A. Stevens,
Y. Tamura,
M. Velazquez,
M. S. Yun
Abstract:
We present observations at 1.1 mm towards 16 powerful radio galaxies and a radio-quiet quasar at 0.5<z<6.3 acquired with the AzTEC camera mounted at the JCMT and ASTE to study the spatial distribution of submillimeter galaxies towards possible protocluster regions. The survey covers a total area of 1.01 square degrees with rms depths of 0.52 - 1.44 mJy and detects 728 sources above 3sigma. We find…
▽ More
We present observations at 1.1 mm towards 16 powerful radio galaxies and a radio-quiet quasar at 0.5<z<6.3 acquired with the AzTEC camera mounted at the JCMT and ASTE to study the spatial distribution of submillimeter galaxies towards possible protocluster regions. The survey covers a total area of 1.01 square degrees with rms depths of 0.52 - 1.44 mJy and detects 728 sources above 3sigma. We find overdensities of a factor of ~2 in the source counts of 3 individual fields (4C+23.56, PKS1138-262 and MRC0355-037) over areas of ~200 sq deg. When combining all fields, the source-count analysis finds an overdensity that reaches a factor $\gtrsim 3$ at S$_{\rm{1.1mm}} \ge 4$ mJy covering a 1.5-arcmin-radius area centred on the AGN. The large size of our maps allows us to establish that beyond a radius of 1.5 arcmin, the radial surface density of SMGs falls to that of a blank field. In addition, we find a trend for SMGs to align closely to a perpendicular direction with respect to the radio jets of the powerful central radio galaxies (73$_{+13}^{-14}$ degrees). This misalignment is found over projected co-moving scales of 4-20 Mpc, departs from perfect alignment (0 deg) by ~5sigma, and apparently has no dependence on SMG luminosity. Under the assumption that the AzTEC sources are at the redshift of the central radio galaxy, the misalignment reported here can be interpreted as SMGs preferentially inhabiting mass-dominant filaments funneling material towards the protoclusters, which are also the parent structures of the radio galaxies.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Transition to the ultimate regime in two-dimensional Rayleigh-Bénard convection
Authors:
Xiaojue Zhu,
Varghese Mathai,
Richard J. A. M. Stevens,
Roberto Verzicco,
Detlef Lohse
Abstract:
The possible transition to the so-called ultimate regime, wherein both the bulk and the boundary layers are turbulent, has been an outstanding issue in thermal convection, since the seminal work by Kraichnan [Phys. Fluids 5, 1374 (1962)]. Yet, when this transition takes place and how the local flow induces it is not fully understood. Here, by performing two-dimensional simulations of Rayleigh-Béna…
▽ More
The possible transition to the so-called ultimate regime, wherein both the bulk and the boundary layers are turbulent, has been an outstanding issue in thermal convection, since the seminal work by Kraichnan [Phys. Fluids 5, 1374 (1962)]. Yet, when this transition takes place and how the local flow induces it is not fully understood. Here, by performing two-dimensional simulations of Rayleigh-Bénard turbulence covering six decades in Rayleigh number Ra up to $10^{14}$ for Prandtl number Pr $=1$, for the first time in numerical simulations we find the transition to the ultimate regime, namely at $\textrm{Ra}^*=10^{13}$. We reveal how the emission of thermal plumes enhances the global heat transport, leading to a steeper increase of the Nusselt number than the classical Malkus scaling $\textrm{Nu} \sim \textrm{Ra}^{1/3}$ [Proc. R. Soc. London A 225, 196 (1954)]. Beyond the transition, the mean velocity profiles are logarithmic throughout, indicating turbulent boundary layers. In contrast, the temperature profiles are only locally logarithmic, namely within the regions where plumes are emitted, and where the local Nusselt number has an effective scaling $\textrm{Nu} \sim \textrm{Ra}^{0.38}$, corresponding to the effective scaling in the ultimate regime.
△ Less
Submitted 11 April, 2018;
originally announced April 2018.
-
Turbulent thermal superstructures in Rayleigh-Bénard convection
Authors:
Richard J. A. M. Stevens,
Alexander Blass,
Xiaojue Zhu,
Roberto Verzicco,
Detlef Lohse
Abstract:
We report the observation of superstructures, i.e.\ very large-scale and long living coherent structures in highly turbulent Rayleigh-Bénard convection up to Rayleigh $Ra=10^9$. We perform direct numerical simulations in horizontally periodic domains with aspect ratios up to $Γ=128$. In the considered $Ra$ number regime the thermal superstructures have a horizontal extend of six to seven times the…
▽ More
We report the observation of superstructures, i.e.\ very large-scale and long living coherent structures in highly turbulent Rayleigh-Bénard convection up to Rayleigh $Ra=10^9$. We perform direct numerical simulations in horizontally periodic domains with aspect ratios up to $Γ=128$. In the considered $Ra$ number regime the thermal superstructures have a horizontal extend of six to seven times the height of the domain and their size is independent of $Ra$. Many laboratory experiments and numerical simulations have focused on small aspect ratio cells in order to achieve the highest possible $Ra$. However, here we show that for very high $Ra$ integral quantities such as the Nusselt number and volume averaged Reynolds number only converge to the large aspect ratio limit around $Γ\approx 4$, while horizontally averaged statistics such as standard deviation and kurtosis converge around $Γ\approx 8$, and the integral scale converges around $Γ\approx 32$, and the peak position of the temperature variance and turbulent kinetic energy spectra only around $Γ\approx 64$.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Comparison of computational codes for direct numerical simulations of turbulent Rayleigh-Bénard convection
Authors:
Gijs L. Kooij,
Mikhail A. Botchev,
Edo M. A. Frederix,
Bernard J. Geurts,
Susanne Horn,
Detlef Lohse,
Erwin P. van der Poel,
Olga Shishkina,
Richard J. A. M. Stevens,
Roberto Verzicco
Abstract:
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume…
▽ More
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume code (Goldfish) are compared with a general purpose finite-volume approach (OpenFOAM) and a general purpose spectral-element code (Nek5000). Reassuringly, all codes provide predictions of the average heat transfer that converge to the same values. The computational costs, however, are found to differ considerably. The specialized codes AFID/RBflow and Goldfish are found to excel in efficiency, outperforming the general purpose flow solvers Nek5000 and OpenFOAM by an order of magnitude with an error on the Nusselt number $Nu$ below $5\%$. However, we find that $Nu$ alone is not sufficient to assess the quality of the numerical results: in fact, instantaneous snapshots of the temperature field from a near wall region obtained for deliberately under-resolved simulations using Nek5000 clearly indicate inadequate flow resolution even when $Nu$ is converged. Overall, dedicated special purpose codes for RB convection are found to be more efficient than general purpose codes.
△ Less
Submitted 25 February, 2018;
originally announced February 2018.
-
Modeling space-time correlations of velocity fluctuations in wind farms
Authors:
Laura J. Lukassen,
Richard J. A. M. Stevens,
Charles Meneveau,
Michael Wilczek
Abstract:
An analytical model for the streamwise velocity space-time correlations in turbulent flows is derived and applied to the special case of velocity fluctuations in large wind farms. The model is based on the Kraichnan-Tennekes random swee** hypothesis, capturing the decorrelation in time while including a mean wind velocity in the streamwise direction. In the resulting model, the streamwise veloci…
▽ More
An analytical model for the streamwise velocity space-time correlations in turbulent flows is derived and applied to the special case of velocity fluctuations in large wind farms. The model is based on the Kraichnan-Tennekes random swee** hypothesis, capturing the decorrelation in time while including a mean wind velocity in the streamwise direction. In the resulting model, the streamwise velocity space-time correlation is expressed as a convolution of the pure space correlation with an analytical temporal decorrelation kernel. Hence, the spatio-temporal structure of velocity fluctuations in wind farms can be derived from the spatial correlations only. We then explore the applicability of the model to predict spatio-temporal correlations in turbulent flows in wind farms. Comparisons of the model with data from a large eddy simulation of flow in a large, spatially periodic wind farm are performed, where needed model parameters such as spatial and temporal integral scales and spatial correlations are determined from the large eddy simulation. Good agreement is obtained between the model and large eddy simulation data showing that spatial data may be used to model the full temporal structure of fluctuations in wind farms.
△ Less
Submitted 4 October, 2017;
originally announced October 2017.
-
Generalized coupled wake boundary layer model: applications and comparisons with field and LES data for two wind-farms
Authors:
Richard J. A. M. Stevens,
Dennice F. Gayme,
Charles Meneveau
Abstract:
We describe a generalization of the Coupled Wake Boundary Layer (CWBL) model for wind-farms that can be used to evaluate the performance of wind-farms under arbitrary wind inflow directions whereas the original CWBL model (Stevens et al., J. Renewable and Sustainable Energy 7, 023115 (2015)) focused on aligned or staggered wind-farms. The generalized CWBL approach combines an analytical Jensen wak…
▽ More
We describe a generalization of the Coupled Wake Boundary Layer (CWBL) model for wind-farms that can be used to evaluate the performance of wind-farms under arbitrary wind inflow directions whereas the original CWBL model (Stevens et al., J. Renewable and Sustainable Energy 7, 023115 (2015)) focused on aligned or staggered wind-farms. The generalized CWBL approach combines an analytical Jensen wake model with a "top-down" boundary layer model coupled through an iterative determination of the wake expansion coefficient and an effective wake coverage area for which the velocity at hub-height obtained using both models converges in the "deep-array" portion (fully developed region) of the wind-farm. The approach accounts for the effect of the wind direction by enforcing the coupling for each wind direction. Here we present detailed comparisons of model predictions with LES results and field measurements for the Horns Rev and Nysted wind-farms operating over a wide range of wind inflow directions. Our results demonstrate that two-way coupling between the Jensen wake model and a "top-down" model enables the generalized CWBL model to predict the "deep-array" performance of a wind-farm better than the Jensen wake model alone. The results also show that the new generalization allows us to study a much larger class of wind-farms than the original CWBL model, which increases the utility of the approach for wind-farm designers.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Dependence of optimal wind turbine spacing on wind farm length
Authors:
Richard J. A. M. Stevens
Abstract:
Recent large eddy simulations have led to improved parameterizations of the effective roughness height of wind farms. This effective roughness height can be used to predict the wind velocity at hub-height as function of the geometric mean of the spanwise and streamwise turbine spacings and the turbine loading factors. Meyers and Meneveau (Wind Energy 15, 305-317 (2012)) used these parameterization…
▽ More
Recent large eddy simulations have led to improved parameterizations of the effective roughness height of wind farms. This effective roughness height can be used to predict the wind velocity at hub-height as function of the geometric mean of the spanwise and streamwise turbine spacings and the turbine loading factors. Meyers and Meneveau (Wind Energy 15, 305-317 (2012)) used these parameterizations to make predictions for the optimal wind turbine spacing in infinitely large wind farms. They found that for a realistic cost ratio between the turbines and the used land surface the optimal turbine spacing may be considerably larger than used in conventional wind farms. Here we extend this analysis by taking the length of the wind farm, i.e.\ the number of rows in the downstream direction, into account and show that the optimal turbine spacing strongly depends on the wind farm length. For small to moderately sized wind farms the model predictions are consistent with spacings found in operational wind farms. For much larger wind farms the extended optimal spacing found for infinite wind farms is confirmed.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Effects of turbine spacing on the power output of extended wind-farms
Authors:
Richard J. A. M. Stevens,
Dennice F. Gayme,
Charles Meneveau
Abstract:
We present results from large eddy simulations (LES) of extended wind-farms for several turbine configurations with a range of different spanwise and streamwise spacing combinations. The results show that for wind-farms arranged in a staggered configuration with spanwise spacings in the range $\approx[3.5,8]$D, where $D$ is the turbine diameter, the power output in the fully developed regime depen…
▽ More
We present results from large eddy simulations (LES) of extended wind-farms for several turbine configurations with a range of different spanwise and streamwise spacing combinations. The results show that for wind-farms arranged in a staggered configuration with spanwise spacings in the range $\approx[3.5,8]$D, where $D$ is the turbine diameter, the power output in the fully developed regime depends primarily on the geometric mean of the spanwise and streamwise turbine spacings. In contrast, for the aligned configuration the power output in the fully developed regime strongly depends on the streamwise turbine spacing and shows weak dependence on the spanwise spacing. Of interest to the rate of wake recovery, we find that the power output is well correlated with the vertical kinetic energy flux, which is a measure of how much kinetic energy is transferred into the wind-turbine region by the mean flow. A comparison between the aligned and staggered configurations reveals that the vertical kinetic energy flux is more localized along turbine rows for aligned wind-farms than for staggered ones. This additional mixing leads to a relatively fast wake recovery for aligned wind-farms.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Observational evidence that positive and negative AGN feedback depends on galaxy mass and jet power
Authors:
E. Kalfountzou,
J. A. Stevens,
M. J. Jarvis,
M. J. Hardcastle,
D. Wilner,
M. Elvis,
M. J. Page,
M. Trichas,
D. J. B. Smith
Abstract:
Several studies support the existence of a link between the AGN and star formation activity. Radio jets have been argued to be an ideal mechanism for direct interaction between the AGN and the host galaxy. A drawback of previous surveys of AGN is that they are fundamentally limited by the degeneracy between redshift and luminosity in flux-density limited samples. To overcome this limitation, we pr…
▽ More
Several studies support the existence of a link between the AGN and star formation activity. Radio jets have been argued to be an ideal mechanism for direct interaction between the AGN and the host galaxy. A drawback of previous surveys of AGN is that they are fundamentally limited by the degeneracy between redshift and luminosity in flux-density limited samples. To overcome this limitation, we present far-infrared Herschel observations of 74 radio-loud quasars (RLQs), 72 radio-quiet quasars (RQQs) and 27 radio galaxies (RGs), selected at 0.9<z<1.1 which span over two decades in optical luminosity. By decoupling luminosity from evolutionary effects, we investigate how the star formation rate (SFR) depends on AGN luminosity, radio-loudness and orientation. We find that: 1) the SFR shows a weak correlation with the bolometric luminosity for all AGN sub-samples, 2) the RLQs show a SFR excess of about a factor of 1.4 compared to the RQQs, matched in terms of black hole mass and bolometric luminosity, suggesting that either positive radio-jet feedback or radio AGN triggering are linked to star-formation triggering and 3) RGs have lower SFRs by a factor of 2.5 than the RLQ sub-sample with the same BH mass and bolometric luminosity. We suggest that there is some jet power threshold at which radio-jet feedback switches from enhancing star formation (by compressing gas) to suppressing it (by ejecting gas). This threshold depends on both galaxy mass and jet power.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
AFiD-GPU: a versatile Navier-Stokes Solver for Wall-Bounded Turbulent Flows on GPU Clusters
Authors:
Xiaojue Zhu,
Everett Phillips,
Vamsi Spandan,
John Donners,
Gregory Ruetsch,
Josh Romero,
Rodolfo Ostilla-Mónico,
Yantao Yang,
Detlef Lohse,
Roberto Verzicco,
Massimiliano Fatica,
Richard J. A. M. Stevens
Abstract:
The AFiD code, an open source solver for the incompressible Navier-Stokes equations ({\color{blue}\burl{http://www.afid.eu}}), has been ported to GPU clusters to tackle large-scale wall-bounded turbulent flow simulations. The GPU porting has been carried out in CUDA Fortran with the extensive use of kernel loop directives (CUF kernels) in order to have a source code as close as possible to the ori…
▽ More
The AFiD code, an open source solver for the incompressible Navier-Stokes equations ({\color{blue}\burl{http://www.afid.eu}}), has been ported to GPU clusters to tackle large-scale wall-bounded turbulent flow simulations. The GPU porting has been carried out in CUDA Fortran with the extensive use of kernel loop directives (CUF kernels) in order to have a source code as close as possible to the original CPU version; just a few routines have been manually rewritten. A new transpose scheme, which is not limited to the GPU version only and can be generally applied to any CFD code that uses pencil distributed parallelization, has been devised to improve the scaling of the Poisson solver, the main bottleneck of incompressible solvers. The GPU version can reduce the wall clock time by an order of magnitude compared to the CPU version for large meshes. Due to the increased performance and efficient use of memory, the GPU version of AFiD can perform simulations in parameter ranges that are unprecedented in thermally-driven wall-bounded turbulence. To verify the accuracy of the code, turbulent Rayleigh-Bénard convection and plane Couette flow are simulated and the results are in good agreement with the experimental and computational data that published in previous literatures.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
Roughness-facilitated local 1/2 scaling does not imply the onset of the ultimate regime of thermal convection
Authors:
Xiaojue Zhu,
Richard J. A. M. Stevens,
Roberto Verzicco,
Detlef Lohse
Abstract:
In thermal convection, roughness is often used as a means to enhance heat transport, expressed in Nusselt number. Yet there is no consensus on whether the Nusselt vs. Rayleigh number scaling exponent ($\mathrm{Nu} \sim \mathrm{Ra}^β$) increases or remains unchanged. Here we numerically investigate turbulent Rayleigh-Bénard convection over rough plates in two dimensions, up to…
▽ More
In thermal convection, roughness is often used as a means to enhance heat transport, expressed in Nusselt number. Yet there is no consensus on whether the Nusselt vs. Rayleigh number scaling exponent ($\mathrm{Nu} \sim \mathrm{Ra}^β$) increases or remains unchanged. Here we numerically investigate turbulent Rayleigh-Bénard convection over rough plates in two dimensions, up to $\mathrm{Ra}=10^{12}$. Varying the height and wavelength of the roughness elements with over 200 combinations, we reveal the existence of two universal regimes. In the first regime, the local effective scaling exponent can reach up to 1/2. However, this cannot be explained as the attainment of the so-called ultimate regime as suggested in previous studies, because a further increase in $\mathrm{Ra}$ leads to the second regime, in which the scaling saturates back to a value close to the smooth case. Counterintuitively, the transition from the first to the second regime corresponds to the competition between bulk and boundary layer flow: from the bulk-dominated regime back to the classical boundary-layer-controlled regime. Our study clearly demonstrates that the local $1/2$ scaling does not signal the onset of asymptotic ultimate thermal convection.
△ Less
Submitted 17 April, 2017;
originally announced April 2017.
-
Confined Rayleigh-Bénard, Rotating Rayleigh-Bénard, and Double Diffusive Convection: A unifying view on turbulent transport enhancement through coherent structure manipulation
Authors:
Kai Leong Chong,
Yantao Yang,
Shi-Di Huang,
**-Qiang Zhong,
Richard J. A. M. Stevens,
Roberto Verzicco,
Detlef Lohse,
Ke-Qing Xia
Abstract:
Many natural and engineering systems are simultaneously subjected to a driving force and a stabilizing force. The interplay between the two forces, especially for highly nonlinear systems such as fluid flow, often results in surprising features. Here we reveal such features in three different types of Rayleigh-Bénard (RB) convection, i.e. buoyancy-driven flow with the fluid density being affected…
▽ More
Many natural and engineering systems are simultaneously subjected to a driving force and a stabilizing force. The interplay between the two forces, especially for highly nonlinear systems such as fluid flow, often results in surprising features. Here we reveal such features in three different types of Rayleigh-Bénard (RB) convection, i.e. buoyancy-driven flow with the fluid density being affected by a scalar field. In the three cases different {\it stabilizing forces} are considered, namely (i) horizontal confinement, (ii) rotation around a vertical axis, and (iii) a second stabilizing scalar field. Despite the very different nature of the stabilizing forces and the corresponding equations of motion, at moderate strength we counterintuitively but consistently observe an {\it enhancement} in the flux, even though the flow motion is weaker than the original RB flow. The flux enhancement occurs in an intermediate regime in which the stabilizing force is strong enough to alter the flow structures in the bulk to a more organised morphology, yet not too strong to severely suppress the flow motions. Near the optimal transport enhancements all three systems exhibit a transition from a state in which the thermal boundary layer (BL) is nested inside the momentum BL to the one with the thermal BL being thicker than the momentum BL.
△ Less
Submitted 15 February, 2017;
originally announced February 2017.
-
The space density of luminous dusty star-forming galaxies at $z>4$: SCUBA-2 and LABOCA imaging of ultrared galaxies from $Herschel$-ATLAS
Authors:
R. J. Ivison,
A. J. R. Lewis,
A. Weiss,
V. Arumugam,
J. M. Simpson,
W. S. Holland,
S. Maddox,
L. Dunne,
E. Valiante,
P. van der Werf,
A. Omont,
H. Dannerbauer,
Ian Smail,
F. Bertoldi,
M. Bremer,
R. S. Bussmann,
Z. -Y. Cai,
D. L. Clements,
A. Cooray,
G. De Zotti,
S. A. Eales,
C. Fuller,
J. Gonzalez-Nuevo,
E. Ibar,
M. Negrello
, et al. (6 additional authors not shown)
Abstract:
Until recently, only a handful of dusty, star-forming galaxies (DSFGs) were known at $z>4$, most of them significantly amplified by gravitational lensing. Here, we have increased the number of such DSFGs substantially, selecting galaxies from the uniquely wide 250-, 350- and 500-$μ$m Herschel-ATLAS imaging survey on the basis of their extremely red far-infrared colors and faint 350- and 500-$μ$m f…
▽ More
Until recently, only a handful of dusty, star-forming galaxies (DSFGs) were known at $z>4$, most of them significantly amplified by gravitational lensing. Here, we have increased the number of such DSFGs substantially, selecting galaxies from the uniquely wide 250-, 350- and 500-$μ$m Herschel-ATLAS imaging survey on the basis of their extremely red far-infrared colors and faint 350- and 500-$μ$m flux densities - ergo they are expected to be largely unlensed, luminous, rare and very distant. The addition of ground-based continuum photometry at longer wavelengths from the JCMT and APEX allows us to identify the dust peak in their SEDs, better constraining their redshifts. We select the SED templates best able to determine photometric redshifts using a sample of 69 high-redshift, lensed DSFGs, then perform checks to assess the impact of the CMB on our technique, and to quantify the systematic uncertainty associated with our photometric redshifts, $σ=0.14\,(1+z)$, using a sample of 25 galaxies with spectroscopic redshifts, each consistent with our color selection. For Herschel-selected ultrared galaxies with typical colors of $S_{500}/S_{250}\sim 2.2$ and $S_{500}/S_{350}\sim 1.3$ and flux densities, $S_{500}\sim 50\,$mJy, we determine a median redshift, $\hat{z}_{\rm phot}=3.66$, an interquartile redshift range, 3.30$-$4.27, with a median rest-frame 8$-$1000-$μ$m luminosity, $\hat{L}_{\rm IR}$, of $1.3\times 10^{13}\,$L$_\odot$. A third lie at $z>4$, suggesting a space density, $ρ_{z>4}$, of $\approx 6 \times 10^{-7}\,$Mpc$^{-3}$. Our sample contains the most luminous known star-forming galaxies, and the most over-dense cluster of starbursting proto-ellipticals yet found.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
The SCUBA-2 Cosmology Legacy Survey: 850um maps, catalogues and number counts
Authors:
J. E. Geach,
J. S. Dunlop,
M. Halpern,
Ian Smail,
P. van der Werf,
D. M. Alexander,
O. Almaini,
I. Aretxaga,
V. Arumugam,
V. Asboth,
M. Banerji,
J. Beanlands,
P. N. Best,
A. W. Blain,
M. Birkinshaw,
E. L. Chapin,
S. C. Chapman,
C-C. Chen,
A. Chrysostomou,
C. Clarke,
D. L. Clements,
C. Conselice,
K. E. K. Coppin,
W. I. Cowley,
A. L. R. Danielson
, et al. (44 additional authors not shown)
Abstract:
We present a catalogue of nearly 3,000 submillimetre sources detected at 850um over ~5 square degrees surveyed as part of the James Clerk Maxwell Telescope (JCMT) SCUBA-2 Cosmology Legacy Survey (S2CLS). This is the largest survey of its kind at 850um, probing a meaningful cosmic volume at the peak of star formation activity and increasing the sample size of submillimetre galaxies selected at 850u…
▽ More
We present a catalogue of nearly 3,000 submillimetre sources detected at 850um over ~5 square degrees surveyed as part of the James Clerk Maxwell Telescope (JCMT) SCUBA-2 Cosmology Legacy Survey (S2CLS). This is the largest survey of its kind at 850um, probing a meaningful cosmic volume at the peak of star formation activity and increasing the sample size of submillimetre galaxies selected at 850um by an order of magnitude. We describe the wide 850um survey component of S2CLS, which covers the key extragalactic survey fields: UKIDSS-UDS, COSMOS, Akari-NEP, Extended Groth Strip, Lockman Hole North, SSA22 and GOODS-North. The average 1-sigma depth of S2CLS is 1.2 mJy/beam, approaching the SCUBA-2 850um confusion limit, which we determine to be ~0.8 mJy/beam. We measure the single dish 850um number counts to unprecedented accuracy, reducing the Poisson errors on the differential counts to approximately 4% at S_850~3mJy. With several independent fields, we investigate field-to-field variance, finding that the number counts on 0.5-1 degree scales are generally within 50% of the S2CLS mean for S_850>3mJy, with scatter consistent with the Poisson and estimated cosmic variance uncertainties, although there is a marginal (2-sigma) density enhancement in the GOODS-North field. The observed number counts are in reasonable agreement with recent phenomenological and semi-analytic models. Finally, the large solid angle of S2CLS allows us to measure the bright-end counts: at S_850>10mJy there are approximately ten sources per square degree, and we detect the distinctive up-turn in the number counts indicative of the detection of local sources of 850um emission and strongly lensed high-redshift galaxies. Here we describe the data collection and reduction procedures and present calibrated maps and a catalogue of sources; these are made publicly available.
△ Less
Submitted 13 July, 2016;
originally announced July 2016.
-
Height-dependence of spatio-temporal spectra of wall-bounded turbulence - LES results and model predictions
Authors:
Michael Wilczek,
Richard J. A. M. Stevens,
Charles Meneveau
Abstract:
Wavenumber-frequency spectra of the streamwise velocity component obtained from large-eddy simulations are presented. Following a recent paper [Wilczek et al., J. Fluid. Mech., 769:R1, 2015] we show that the main features, a Doppler shift and a Doppler broadening of frequencies, are captured by an advection model based on the Tennekes-Kraichnan random-swee** hypothesis with additional mean flow.…
▽ More
Wavenumber-frequency spectra of the streamwise velocity component obtained from large-eddy simulations are presented. Following a recent paper [Wilczek et al., J. Fluid. Mech., 769:R1, 2015] we show that the main features, a Doppler shift and a Doppler broadening of frequencies, are captured by an advection model based on the Tennekes-Kraichnan random-swee** hypothesis with additional mean flow. In this paper, we focus on the height-dependence of the spectra within the logarithmic layer of the flow. We furthermore benchmark an analytical model spectrum that takes the predictions of the random-swee** model as a starting point and find good agreement with the LES data. We also quantify the influence of LES grid resolution on the wavenumber-frequency spectra.
△ Less
Submitted 8 June, 2016;
originally announced June 2016.
-
Wind Turbine Large-Eddy Simulations on Very Coarse Grid Resolutions using an Actuator Line Model
Authors:
Luis A. Martínez Tossas,
Richard J. A. M. Stevens,
Charles Meneveau
Abstract:
In this work the accuracy of the Actuator Line Model (ALM) in Large Eddy Simulations of wind turbine flow is studied under the specific conditions of very coarse spatial resolutions. For finely-resolved conditions, it is known that ALM provides better accuracy compared to the standard Actuator Disk Model (ADM) without rotation. However, we show here that on very coarse resolutions, flow induction…
▽ More
In this work the accuracy of the Actuator Line Model (ALM) in Large Eddy Simulations of wind turbine flow is studied under the specific conditions of very coarse spatial resolutions. For finely-resolved conditions, it is known that ALM provides better accuracy compared to the standard Actuator Disk Model (ADM) without rotation. However, we show here that on very coarse resolutions, flow induction occurring at rotor scales can affect the predicted inflow angle and can adversely affect the ALM predictions. We first provide an illustration of coarse LES to reproduce wind tunnel measurements. The resulting flow predictions are good, but the challenges in predicting power outputs from the detailed ALM motivate more detailed analysis on a case with uniform inflow. We present a theoretical framework to compare the filtered quantities that enter the Large-Eddy Simulation equations as body forces with a scaling relation between the filtered and unfiltered quantities. The study aims to apply the theoretical derivation to the simulation framework and improve the current results for an ALM, especially in the near wake where the largest differences are observed.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
A SCUBA-2 survey of FeLoBAL QSOs: Are FeLoBALs in a `transition phase' between ULIRGs and QSOs?
Authors:
Giulio Violino,
Kristen E. K. Coppin,
Jason A. Stevens,
Duncan Farrah,
James E. Geach,
Dave M. Alexander,
Ryan Hickox,
Daniel J. B. Smith,
Julie L. Wardlow
Abstract:
It is thought that a class of broad absorption line (BAL) QSOs, characterised by Fe absorption features in their UV spectra (called `FeLoBALs'), could mark a transition stage between the end of an obscured starburst event and a youthful QSO beginning to shed its dust cocoon, where Fe has been injected into the interstellar medium by the starburst. To test this hypothesis we have undertaken deep SC…
▽ More
It is thought that a class of broad absorption line (BAL) QSOs, characterised by Fe absorption features in their UV spectra (called `FeLoBALs'), could mark a transition stage between the end of an obscured starburst event and a youthful QSO beginning to shed its dust cocoon, where Fe has been injected into the interstellar medium by the starburst. To test this hypothesis we have undertaken deep SCUBA-2 850 $μ$m observations of a sample of 17 FeLoBAL QSOs with 0.89 $\leq$ z $\leq$ 2.78 and -23.31 $\leq$ M$_{B}$ $\leq$-28.50 to directly detect an excess in the thermal emission of the dust which would probe enhanced star-formation activity. We find that FeLoBALs are not luminous sources in the submillimetre, none of them are individually detected at 850 $μ$m, nor as a population through stacking ($F_{s}=1.14\pm0.58$ mJy). Statistical and survival analyses reveal that FeLoBALs have sub-mm properties consistent with BAL and non-BAL QSOs with matched redshifts and magnitudes. An SED fitting analysis shows that the FIR emission is dominated by AGN activity, and a starburst component is required only in 6/17 sources of our sample; moreover the integrated total luminosity of 16/17 sources is L$\geq$10$^{12}$L$_{\odot}$, high enough to classify FeLoBALs as infrared luminous. In conclusion, we do not find any evidence in support of FeLoBAL QSOs being a transition population between a ULIRG and an unobscured QSO; in particular, FeLoBALs are not characterized by a cold starburst which would support this hypothesis.
△ Less
Submitted 17 December, 2015;
originally announced December 2015.
-
Submm-bright X-ray absorbed QSOs at z~2: insights into the co-evolution of AGN and star-formation
Authors:
A. Khan-Ali,
F. J. Carrera,
M. J. Page,
J. A. Stevens,
S. Mateos,
M. Symeonidis,
J. M. Cao Orjales
Abstract:
We have assembled a sample of 5 X-ray-absorbed and submm-luminous type 1 QSOs at $z \sim 2$ which are simultaneously growing their central black holes through accretion and forming stars copiously. We present here the analysis of their rest-frame UV to submm Spectral Energy Distributions (SEDs), including new Herschel data. Both AGN (direct and reprocessed) and Star Formation (SF) emission are nee…
▽ More
We have assembled a sample of 5 X-ray-absorbed and submm-luminous type 1 QSOs at $z \sim 2$ which are simultaneously growing their central black holes through accretion and forming stars copiously. We present here the analysis of their rest-frame UV to submm Spectral Energy Distributions (SEDs), including new Herschel data. Both AGN (direct and reprocessed) and Star Formation (SF) emission are needed to model their SEDs. From the SEDs and their UV-optical spectra we have estimated the masses of their black holes $M_{BH}\sim 10^{9}-10^{10}\,M_{\odot}$, their intrinsic AGN bolometric luminosities $L_{BOL}\sim(0.8 - 20)\times 10^{13} L_{\odot}$, Eddington ratios $L_{BOL}/L_{Edd}\sim 0.1 - 1.1$ and bolometric corrections $L_{BOL}/L_{X,2-10}\sim 30 - 500$. These values are common among optically and X-ray-selected type 1 QSOs (except for RX~J1249), except for the bolometric corrections, which are higher. These objects show very high far-infrared luminosities $L_{FIR}\sim$ (2 - 8)$\times10^{12}\,M_{\odot}$ and Star Formation Rates SFR$\sim 1000 M_{\odot}/$y. From their $L_{FIR}$ and the shape of their FIR-submm emission we have estimated star-forming dust masses of $M_{DUST}\sim 10^9\,M_\odot$. We have found evidence of a tentative correlation between the gas column densities of the ionized absorbers detected in X-ray (N$_{H_{ion}}$) and $SFR$. Our computed black hole masses are amongst the most massive known.
△ Less
Submitted 9 January, 2015;
originally announced January 2015.
-
Comparison between two and three dimensional Rayleigh-Bénard convection
Authors:
Erwin P. van der Poel,
Richard J. A. M. Stevens,
Detlef Lohse
Abstract:
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are…
▽ More
Two dimensional (2D) and three dimensional (3D) Rayleigh-Bénard convection is compared using results from direct numerical simulations and prior experiments. The explored phase diagrams for both cases are reviewed. The differences and similarities between 2D and 3D are studied using Nu(Ra) for Pr = 4.38 and Pr = 0.7 and Nu(Pr) for Ra up to $10^8$. In the Nu(Ra) scaling at higher Pr, 2D and 3D are very similar; differing only by a constant factor up to $\text{Ra} = 10^{10}$. In contrast, the difference is large at lower Pr, due to the strong roll state dependence of Nu in 2D. The behaviour of Nu(Pr) is similar in 2D and 3D at large Pr. However, it differs significantly around Pr = 1. The Reynolds number values are consistently higher in 2D and additionally converge at large Pr. Finally, the thermal boundary layer profiles are compared in 2D and 3D.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Temporal structure of aggregate power fluctuations in large-eddy simulations of extended wind-farms
Authors:
Richard J. A. M. Stevens,
Charles Meneveau
Abstract:
Fluctuations represent a major challenge for the incorporation of electric power from large wind-farms into power grids. Wind farm power output fluctuates strongly in time, over various time scales. Understanding these fluctuations, especially their spatio-temporal characteristics, is particularly important for the design of backup power systems that must be readily available in conjunction with w…
▽ More
Fluctuations represent a major challenge for the incorporation of electric power from large wind-farms into power grids. Wind farm power output fluctuates strongly in time, over various time scales. Understanding these fluctuations, especially their spatio-temporal characteristics, is particularly important for the design of backup power systems that must be readily available in conjunction with wind-farms. In this work we analyze the power fluctuations associated with the wind-input variability at scales between minutes to several hours, using large eddy simulations (LES) of extended wind-parks, interacting with the atmospheric boundary layer. LES studies enable careful control of parameters and availability of wind-velocities simultaneously across the entire wind-farm. The present study focuses on neutral atmospheric conditions and flat terrain, using actuator-disk representations of the individual wind-turbines. We consider power from various aggregates of wind-turbines such as the total average power signal, or signals from sub-averages within the wind-farm. Non-trivial correlations are observed due to the complex interactions between turbines placed downstream of each other, and they lead to noticeable spectral peaks at frequencies associated with the inter-turbine spacings when the wind-direction is completely fixed. In that case we observe that the frequency spectra of the total wind-farm output show a decay that follows approximately a $-5/3$ power-law scaling regime, qualitatively consistent with some observations made in field-scale operational wind-parks (Apt, 2007). We find that these features are still observed when the wind-speed varies in magnitude. However, significant changes in the wind-direction over time tend to smooth out the observed spectral peak and reduce the extent of the observed $-5/3$ power-law.
△ Less
Submitted 22 December, 2014;
originally announced December 2014.
-
Heat transport in boiling turbulent Rayleigh-Bénard convection
Authors:
Rajaram Lakkaraju,
Richard J. A. M. Stevens,
Paolo Oresta,
Roberto Verzicco,
Detlef Lohse,
Andrea Prosperetti
Abstract:
Boiling is an extremely effective way to promote heat transfer from a hot surface to a liquid due to several mechanisms many of which are not understood in quantitative detail. An important component of the overall process is that the buoyancy of the bubbles compounds with that of the liquid to give rise to a much enhanced natural convection. In this paper we focus specifically on this enhancement…
▽ More
Boiling is an extremely effective way to promote heat transfer from a hot surface to a liquid due to several mechanisms many of which are not understood in quantitative detail. An important component of the overall process is that the buoyancy of the bubbles compounds with that of the liquid to give rise to a much enhanced natural convection. In this paper we focus specifically on this enhancement and present a numerical study of the resulting two-phase Rayleigh-Bénard convection process. We make no attempt to model other aspects of the boiling process such as bubble nucleation and detachment. We consider a cylindrical cell with a diameter equal to its height. The cell base and top are held at temperatures above and below the boiling point of the liquid, respectively. By kee** the temperature difference constant and changing the liquid pressure we study the effect of the liquid superheat in a Rayleigh number range that, in the absence of boiling, would be between $2\times10^6$ and $5\times10^9$. We find a considerable enhancement of the heat transfer and study its dependence on the bubble number, the degree of superheat of the hot cell bottom and the Rayleigh number. The increased buoyancy provided by the bubbles leads to more energetic hot plumes detaching from the hot cell bottom and, as a consequence, the strength of the circulation in the cell is significantly increased. Our results are in general agreement with recent experimental results of Zhong et al., Phys. Rev. Lett. {\bf 102}, 124501 (2009) for boiling Rayleigh-Bénard convection.
△ Less
Submitted 22 December, 2014;
originally announced December 2014.
-
Sidewall effects in Rayleigh-Bénard convection
Authors:
Richard J. A. M. Stevens,
Detlef Lohse,
Roberto Verzicco
Abstract:
We investigate the influence of the temperature boundary conditions at the sidewall on the heat transport in Rayleigh-Bénard (RB) convection using direct numerical simulations. For relatively low Rayleigh numbers Ra the heat transport is higher when the sidewall is isothermal, kept at a temperature $T_c+Δ/2$ (where $Δ$ is the temperature difference between the horizontal plates and $T_c$ the tempe…
▽ More
We investigate the influence of the temperature boundary conditions at the sidewall on the heat transport in Rayleigh-Bénard (RB) convection using direct numerical simulations. For relatively low Rayleigh numbers Ra the heat transport is higher when the sidewall is isothermal, kept at a temperature $T_c+Δ/2$ (where $Δ$ is the temperature difference between the horizontal plates and $T_c$ the temperature of the cold plate), than when the sidewall is adiabatic. The reason is that in the former case part of the heat current avoids the thermal resistance of the fluid layer by esca** through the sidewall that acts as a short-circuit. For higher Ra the bulk becomes more isothermal and this reduces the heat current through the sidewall. Therefore the heat flux in a cell with an isothermal sidewall converges to the value obtained with an adiabatic sidewall for high enough Ra ($\simeq 10^{10}$). However, when the sidewall temperature deviates from $T_c+Δ/2$ the heat transport at the bottom and top plates is different from the value obtained using an adiabatic sidewall. In this case the difference does not decrease with increasing Ra thus indicating that the ambient temperature of the experimental apparatus can influence the heat transfer. A similar behavior is observed when only a very small sidewall region close to the horizontal plates is kept isothermal, while the rest of the sidewall is adiabatic. The reason is that in the region closest to the horizontal plates the temperature difference between the fluid and the sidewall is highest. This suggests that one should be careful with the placement of thermal shields outside the fluid sample to minimize spurious heat currents.
△ Less
Submitted 22 December, 2014;
originally announced December 2014.
-
Turbulent Rayleigh-Bénard convection described by projected dynamics in phase space
Authors:
Johannes Lülff,
Michael Wilczek,
Richard J. A. M. Stevens,
Rudolf Friedrich,
Detlef Lohse
Abstract:
Rayleigh-Bénard convection, i.e. the flow of a fluid between two parallel plates that is driven by a temperature gradient, is an idealised setup to study thermal convection. Of special interest are the statistics of the turbulent temperature field, which we are investigating and comparing for three different geometries, namely convection with periodic horizontal boundary conditions in three and tw…
▽ More
Rayleigh-Bénard convection, i.e. the flow of a fluid between two parallel plates that is driven by a temperature gradient, is an idealised setup to study thermal convection. Of special interest are the statistics of the turbulent temperature field, which we are investigating and comparing for three different geometries, namely convection with periodic horizontal boundary conditions in three and two dimensions as well as convection in a cylindrical vessel, in order to work out similarities and differences. To this end, we derive an exact evolution equation for the temperature probability density function (PDF). Unclosed terms are expressed as conditional averages of velocities and heat diffusion, which are estimated from direct numerical simulations. This framework lets us identify the average behaviour of a fluid particle by revealing the mean evolution of fluid of different temperatures in different parts of the convection cell. We connect the statistics to the dynamics of Rayleigh-Bénard convection, giving deeper insights into the temperature statistics and transport mechanisms. We find that the average behaviour is described by closed cycles in phase space that reconstruct the typical Rayleigh-Bénard cycle of fluid heating up at the bottom, rising up to the top plate, cooling down and falling down again. The detailed behaviour shows subtle differences between the three cases.
△ Less
Submitted 17 August, 2015; v1 submitted 19 December, 2014;
originally announced December 2014.