-
Analysis of spatial correlations in a model 2D liquid through eigenvalues and eigenvectors of atomic level stress matrices
Authors:
V. A. Levashov,
M. G. Stepanov
Abstract:
Considerations of local atomic level stresses associated with each atom represent a particular approach to address structures of disordered materials at the atomic level. We studied structural correlations in a two-dimensional model liquid using molecular dynamics simulations in the following way. We diagonalized the atomic level stress tensors of every atom and investigated correlations between t…
▽ More
Considerations of local atomic level stresses associated with each atom represent a particular approach to address structures of disordered materials at the atomic level. We studied structural correlations in a two-dimensional model liquid using molecular dynamics simulations in the following way. We diagonalized the atomic level stress tensors of every atom and investigated correlations between the eigenvalues and orientations of the eigenvectors of different atoms as a function of distance between them. It is demonstrated that the suggested approach can be used to characterize structural correlations in disordered materials. In particular, we found that changes in the stress correlation functions on decrease of temperature are the most pronounced for the pairs of atoms with separation distance that corresponds to the first minimum in the pair density function. We also show that the angular dependencies of the stress correlation functions previously reported in [Phys. Rev. E v.91, 032301 (2015)] related not to the alleged anisotropies of the Eshelby's stress fields, but to the rotational properties of the stress tensors.
△ Less
Submitted 27 July, 2015; v1 submitted 22 April, 2015;
originally announced April 2015.
-
Second harmonic generation in dissipative metamaterials
Authors:
Ye. S. Mukhametkarimov,
Zh. A. Kudyshev,
A. E. Davletov,
I. R. Gabitov,
A. I. Maimistov,
M. G. Stepanov
Abstract:
Second harmonic generation is considered in lossy negative-index metamaterials. It is shown that energy transfer from fundamental to harmonic takes place in the entire sample for the range of phase mismatch values. Note that in conventional case this range collapses to the point (ideal phase matching). The dependance of the boundary of this range as function of dissipation values is obtained using…
▽ More
Second harmonic generation is considered in lossy negative-index metamaterials. It is shown that energy transfer from fundamental to harmonic takes place in the entire sample for the range of phase mismatch values. Note that in conventional case this range collapses to the point (ideal phase matching). The dependance of the boundary of this range as function of dissipation values is obtained using computer simulations.
△ Less
Submitted 11 October, 2013;
originally announced October 2013.
-
Predicting Failures in Power Grids: The Case of Static Overloads
Authors:
Michael Chertkov,
Feng Pan,
Mikhail G. Stepanov
Abstract:
Here we develop an approach to predict power grid weak points, and specifically to efficiently identify the most probable failure modes in static load distribution for a given power network. This approach is applied to two examples: Guam's power system and also the IEEE RTS-96 system, both modeled within the static Direct Current power flow model. Our algorithm is a power network adaption of the w…
▽ More
Here we develop an approach to predict power grid weak points, and specifically to efficiently identify the most probable failure modes in static load distribution for a given power network. This approach is applied to two examples: Guam's power system and also the IEEE RTS-96 system, both modeled within the static Direct Current power flow model. Our algorithm is a power network adaption of the worst configuration heuristics, originally developed to study low probability events in physics and failures in error-correction. One finding is that, if the normal operational mode of the grid is sufficiently healthy, the failure modes, also called instantons, are sufficiently sparse, i.e. the failures are caused by load fluctuations at only a few buses. The technique is useful for discovering weak links which are saturated at the instantons. It can also identify generators working at the capacity and generators under capacity, thus providing predictive capability for improving the reliability of any power network.
△ Less
Submitted 15 September, 2010; v1 submitted 3 June, 2010;
originally announced June 2010.
-
Instanton-based Techniques for Analysis and Reduction of Error Floors of LDPC Codes
Authors:
Shashi Kiran Chilappagari,
Michael Chertkov,
Mikhail G. Stepanov,
Bane Vasic
Abstract:
We describe a family of instanton-based optimization methods developed recently for the analysis of the error floors of low-density parity-check (LDPC) codes. Instantons are the most probable configurations of the channel noise which result in decoding failures. We show that the general idea and the respective optimization technique are applicable broadly to a variety of channels, discrete or co…
▽ More
We describe a family of instanton-based optimization methods developed recently for the analysis of the error floors of low-density parity-check (LDPC) codes. Instantons are the most probable configurations of the channel noise which result in decoding failures. We show that the general idea and the respective optimization technique are applicable broadly to a variety of channels, discrete or continuous, and variety of sub-optimal decoders. Specifically, we consider: iterative belief propagation (BP) decoders, Gallager type decoders, and linear programming (LP) decoders performing over the additive white Gaussian noise channel (AWGNC) and the binary symmetric channel (BSC).
The instanton analysis suggests that the underlying topological structures of the most probable instanton of the same code but different channels and decoders are related to each other. Armed with this understanding of the graphical structure of the instanton and its relation to the decoding failures, we suggest a method to construct codes whose Tanner graphs are free of these structures, and thus have less significant error floors.
△ Less
Submitted 9 March, 2009;
originally announced March 2009.
-
New Bisoltion Solutions in Dispersion Managed Systems
Authors:
M. Shkarayev,
M. G. Stepanov
Abstract:
In this paper we propose a method which provides a full description of solitary wave solutions of the Schroedinger equation with periodically varying dispersion. This method is based on analysis and polynomial deformation of the spectrum of an iterative map. Using this method we discover a new family of antisymmetric bisoliton solutions. In addition to the fact that these solutions are of intere…
▽ More
In this paper we propose a method which provides a full description of solitary wave solutions of the Schroedinger equation with periodically varying dispersion. This method is based on analysis and polynomial deformation of the spectrum of an iterative map. Using this method we discover a new family of antisymmetric bisoliton solutions. In addition to the fact that these solutions are of interest for nonlinear fiber optics and the theory of nonlinear Schroedinger equations with periodic coefficients, they have potential applications for increasing of bit-rate in high speed optical fiber communications.
△ Less
Submitted 26 November, 2007;
originally announced November 2007.
-
Improving convergence of Belief Propagation decoding
Authors:
M. G. Stepanov,
M. Chertkov
Abstract:
The decoding of Low-Density Parity-Check codes by the Belief Propagation (BP) algorithm is revisited. We check the iterative algorithm for its convergence to a codeword (termination), we run Monte Carlo simulations to find the probability distribution function of the termination time, n_it. Tested on an example [155, 64, 20] code, this termination curve shows a maximum and an extended algebraic…
▽ More
The decoding of Low-Density Parity-Check codes by the Belief Propagation (BP) algorithm is revisited. We check the iterative algorithm for its convergence to a codeword (termination), we run Monte Carlo simulations to find the probability distribution function of the termination time, n_it. Tested on an example [155, 64, 20] code, this termination curve shows a maximum and an extended algebraic tail at the highest values of n_it. Aiming to reduce the tail of the termination curve we consider a family of iterative algorithms modifying the standard BP by means of a simple relaxation. The relaxation parameter controls the convergence of the modified BP algorithm to a minimum of the Bethe free energy. The improvement is experimentally demonstrated for Additive-White-Gaussian-Noise channel in some range of the signal-to-noise ratios. We also discuss the trade-off between the relaxation parameter of the improved iterative scheme and the number of iterations.
△ Less
Submitted 25 July, 2006;
originally announced July 2006.
-
An Efficient Pseudo-Codeword Search Algorithm for Linear Programming Decoding of LDPC Codes
Authors:
Michael Chertkov,
Mikhail G. Stepanov
Abstract:
In Linear Programming (LP) decoding of a Low-Density-Parity-Check (LDPC) code one minimizes a linear functional, with coefficients related to log-likelihood ratios, over a relaxation of the polytope spanned by the codewords \cite{03FWK}. In order to quantify LP decoding, and thus to describe performance of the error-correction scheme at moderate and large Signal-to-Noise-Ratios (SNR), it is impo…
▽ More
In Linear Programming (LP) decoding of a Low-Density-Parity-Check (LDPC) code one minimizes a linear functional, with coefficients related to log-likelihood ratios, over a relaxation of the polytope spanned by the codewords \cite{03FWK}. In order to quantify LP decoding, and thus to describe performance of the error-correction scheme at moderate and large Signal-to-Noise-Ratios (SNR), it is important to study the relaxed polytope to understand better its vertexes, so-called pseudo-codewords, especially those which are neighbors of the zero codeword. In this manuscript we propose a technique to heuristically create a list of these neighbors and their distances. Our pseudo-codeword-search algorithm starts by randomly choosing the initial configuration of the noise. The configuration is modified through a discrete number of steps. Each step consists of two sub-steps. Firstly, one applies an LP decoder to the noise-configuration deriving a pseudo-codeword. Secondly, one finds configuration of the noise equidistant from the pseudo codeword and the zero codeword. The resulting noise configuration is used as an entry for the next step. The iterations converge rapidly to a pseudo-codeword neighboring the zero codeword. Repeated many times, this procedure is characterized by the distribution function (frequency spectrum) of the pseudo-codeword effective distance. The effective distance of the coding scheme is approximated by the shortest distance pseudo-codeword in the spectrum. The efficiency of the procedure is demonstrated on examples of the Tanner $[155,64,20]$ code and Margulis $p=7$ and $p=11$ codes (672 and 2640 bits long respectively) operating over an Additive-White-Gaussian-Noise (AWGN) channel.
△ Less
Submitted 4 July, 2007; v1 submitted 26 January, 2006;
originally announced January 2006.
-
Instanton analysis of Low-Density-Parity-Check codes in the error-floor regime
Authors:
M. G. Stepanov,
M. Chertkov
Abstract:
In this paper we develop instanton method introduced in [1], [2], [3] to analyze quantitatively performance of Low-Density-Parity-Check (LDPC) codes decoded iteratively in the so-called error-floor regime. We discuss statistical properties of the numerical instanton-amoeba scheme focusing on detailed analysis and comparison of two regular LDPC codes: Tanner's (155, 64, 20) and Margulis' (672, 33…
▽ More
In this paper we develop instanton method introduced in [1], [2], [3] to analyze quantitatively performance of Low-Density-Parity-Check (LDPC) codes decoded iteratively in the so-called error-floor regime. We discuss statistical properties of the numerical instanton-amoeba scheme focusing on detailed analysis and comparison of two regular LDPC codes: Tanner's (155, 64, 20) and Margulis' (672, 336, 16) codes. In the regime of moderate values of the signal-to-noise ratio we critically compare results of the instanton-amoeba evaluations against the standard Monte-Carlo calculations of the Frame-Error-Rate.
△ Less
Submitted 16 January, 2006;
originally announced January 2006.
-
The error-floor of LDPC codes in the Laplacian channel
Authors:
M. G. Stepanov,
M. Chertkov
Abstract:
We analyze the performance of Low-Density-Parity-Check codes in the error-floor domain where the Signal-to-Noise-Ratio, s, is large, s >> 1. We describe how the instanton method of theoretical physics, recently adapted to coding theory, solves the problem of characterizing the error-floor domain in the Laplacian channel. An example of the (155,64,20) LDPC code with four iterations (each iteratio…
▽ More
We analyze the performance of Low-Density-Parity-Check codes in the error-floor domain where the Signal-to-Noise-Ratio, s, is large, s >> 1. We describe how the instanton method of theoretical physics, recently adapted to coding theory, solves the problem of characterizing the error-floor domain in the Laplacian channel. An example of the (155,64,20) LDPC code with four iterations (each iteration consisting of two semi-steps: from bits-to-checks and from checks-to-bits) of the min-sum decoding is discussed. A generalized computational tree analysis is devised to explain the rational structure of the leading instantons. The asymptotic for the symbol Bit-Error-Rate in the error-floor domain is comprised of individual instanton contributions, each estimated as ~ \exp(-l_{inst;L} s), where the effective distances, l_{inst;L}, of the the leading instantons are 7.6, 8.0 and 8.0 respectively. (The Hamming distance of the code is 20.) The analysis shows that the instantons are distinctly different from the ones found for the same coding/decoding scheme performing over the Gaussian channel. We validate instanton results against direct simulations and offer an explanation for remarkable performance of the instanton approximation not only in the extremal, s -> \infty, limit but also at the moderate s values of practical interest.
△ Less
Submitted 3 October, 2005; v1 submitted 11 July, 2005;
originally announced July 2005.
-
Diagnosis of weaknesses in modern error correction codes: a physics approach
Authors:
M. G. Stepanov,
V. Chernyak,
M. Chertkov,
B. Vasic
Abstract:
One of the main obstacles to the wider use of the modern error-correction codes is that, due to the complex behavior of their decoding algorithms, no systematic method which would allow characterization of the Bit-Error-Rate (BER) is known. This is especially true at the weak noise where many systems operate and where coding performance is difficult to estimate because of the diminishingly small…
▽ More
One of the main obstacles to the wider use of the modern error-correction codes is that, due to the complex behavior of their decoding algorithms, no systematic method which would allow characterization of the Bit-Error-Rate (BER) is known. This is especially true at the weak noise where many systems operate and where coding performance is difficult to estimate because of the diminishingly small number of errors. We show how the instanton method of physics allows one to solve the problem of BER analysis in the weak noise range by recasting it as a computationally tractable minimization problem.
△ Less
Submitted 1 June, 2005;
originally announced June 2005.
-
Rain initiation time in turbulent warm clouds
Authors:
G. Falkovich,
M. G. Stepanov,
M. Vucelja
Abstract:
We present a mean-field model that describes droplet growth due to condensation and collisions and droplet loss due to fallout. The model allows for an effective numerical simulation. We study how the rain initiation time depends on different parameters. We also present a simple model that allows one to estimate the rain initiation time for turbulent clouds with an inhomogeneous concentration of…
▽ More
We present a mean-field model that describes droplet growth due to condensation and collisions and droplet loss due to fallout. The model allows for an effective numerical simulation. We study how the rain initiation time depends on different parameters. We also present a simple model that allows one to estimate the rain initiation time for turbulent clouds with an inhomogeneous concentration of cloud condensation nuclei. In particular, we show that over-seeding even a part of a cloud by small hygroscopic nuclei one can substantially delay the onset of precipitation.
△ Less
Submitted 21 November, 2004;
originally announced November 2004.
-
Resampling methods for document clustering
Authors:
D. Volk,
M. G. Stepanov
Abstract:
We compare the performance of different clustering algorithms applied to the task of unsupervised text categorization. We consider agglomerative clustering algorithms, principal direction divisive partitioning and (for the first time) superparamagnetic clustering with several distance measures. The algorithms have been applied to test databases extracted from the Reuters-21578 text categorizatio…
▽ More
We compare the performance of different clustering algorithms applied to the task of unsupervised text categorization. We consider agglomerative clustering algorithms, principal direction divisive partitioning and (for the first time) superparamagnetic clustering with several distance measures. The algorithms have been applied to test databases extracted from the Reuters-21578 text categorization test database. We find that simple application of the different clustering algorithms yields clustering solutions of comparable quality. In order to achieve considerable improvements of the clustering results it is crucial to reduce the dictionary of words considered in the representation of the documents. Significant improvements of the quality of the clustering can be obtained by identifying discriminative words and filtering out indiscriminative words from the dictionary. We present two methods, each based on a resampling scheme, for selecting discriminative words in an unsupervised way.
△ Less
Submitted 1 September, 2001;
originally announced September 2001.
-
Laplacian growth with separately controlled noise and anisotropy
Authors:
M. G. Stepanov,
L. S. Levitov
Abstract:
Conformal map** models are used to study competition of noise and anisotropy in Laplacian growth. For that, a new family of models is introduced with the noise level and directional anisotropy controlled independently. Fractalization is observed in both anisotropic growth and the growth with varying noise. Fractal dimension is determined from cluster size scaling with its area. For isotropic g…
▽ More
Conformal map** models are used to study competition of noise and anisotropy in Laplacian growth. For that, a new family of models is introduced with the noise level and directional anisotropy controlled independently. Fractalization is observed in both anisotropic growth and the growth with varying noise. Fractal dimension is determined from cluster size scaling with its area. For isotropic growth we find d = 1.7, both at high and low noise. For anisotropic growth with reduced noise the dimension can be as low as d = 1.5 and apparently is not universal. Also, we study fluctuations of particle areas and observe, in agreement with previous studies, that exceptionally large particles may appear during the growth, leading to pathologically irregular clusters. This difficulty is circumvented by using an acceptance window for particle areas.
△ Less
Submitted 23 February, 2001; v1 submitted 25 May, 2000;
originally announced May 2000.
-
Large negative velocity gradients in Burgers turbulence
Authors:
A. I. Chernykh,
M. G. Stepanov
Abstract:
We consider 1D Burgers equation driven by large-scale white-in-time random force. The tails of the velocity gradients probability distribution function (PDF) are analyzed by saddle-point approximation in the path integral describing the velocity statistics. The structure of the saddle-point (instanton), that is velocity field configuration realizing the maximum of probability, is studied numeric…
▽ More
We consider 1D Burgers equation driven by large-scale white-in-time random force. The tails of the velocity gradients probability distribution function (PDF) are analyzed by saddle-point approximation in the path integral describing the velocity statistics. The structure of the saddle-point (instanton), that is velocity field configuration realizing the maximum of probability, is studied numerically in details. The numerical results allow us to find analytical solution for the long-time part of the instanton. Its careful analysis confirms the result of [Phys. Rev. Lett. 78 (8) 1452 (1997) [chao-dyn/9609005]] based on short-time estimations that the left tail of PDF has the form ln P(u_x) \propto -|u_x|^(3/2).
△ Less
Submitted 8 May, 2001; v1 submitted 13 January, 2000;
originally announced January 2000.
-
Narrowing of Bennett Hole in Collisional Plasma
Authors:
E. V. Podivilov,
D. A. Shapiro,
M. G. Stepanov
Abstract:
The profile of a Bennett hole induced by laser field in ionic distribution in collisional plasma is calculated. Influence of Chandrasekhar's dependence of coefficients of velocity space transport on the profile is included into the calculation for the first time. It is found that the hole narrows down as the field detuning frequency increases. Physical cause of the effect is the falling dependen…
▽ More
The profile of a Bennett hole induced by laser field in ionic distribution in collisional plasma is calculated. Influence of Chandrasekhar's dependence of coefficients of velocity space transport on the profile is included into the calculation for the first time. It is found that the hole narrows down as the field detuning frequency increases. Physical cause of the effect is the falling dependence of Coulomb collision frequency on the ionic velocity. Estimations show that the effect is quite observable under conditions of high-current gas-discharge plasma.
△ Less
Submitted 30 March, 1995;
originally announced March 1995.
