Showing 1–20 of 20 results for author: Steinhauer, S

Attojoule superconducting thermal logic and memories

Authors: Hui Wang, Niels Noordzij, Stephan Steinhauer, Thomas Descamps, Eitan Oksenberg, Val Zwiller, Iman Esmaeil Zadeh

Abstract: Due to stringent thermal budgets in cryogenic technologies such as superconducting quantum computers and sensors, minimizing the energy dissipation and power consumption of cryogenic electronic components is pivotal for large-scale devices. However, electronic building blocks that simultaneously offer low energy consumption, fast switching, low error rates, a small footprint and simple fabrication… ▽ More Due to stringent thermal budgets in cryogenic technologies such as superconducting quantum computers and sensors, minimizing the energy dissipation and power consumption of cryogenic electronic components is pivotal for large-scale devices. However, electronic building blocks that simultaneously offer low energy consumption, fast switching, low error rates, a small footprint and simple fabrication remain elusive. In this work, we demonstrate a superconducting switch with attojoule switching energy, high speed (pico-second rise/fall times), and high integration density (on the order of $10^{-2}$ $\mathrm{μm^2}$ per switch). The switch consists of a superconducting channel and a metal heater separated by an insulating silica layer, prepared using lift-off techniques. We experimentally demonstrate digital gate operations utilizing this technology, such as NOT, NAND, NOR, AND, and OR gates, with a few femtojoule energy consumption and ultralow bit error rates < $10^{-8}$. In addition, we build volatile memory elements with few femtojoule energy consumption per operation, a nanosecond operation speed, and a retention time over $10^5$ s. These superconducting switches open new possibilities for increasing the size and complexity of modern cryogenic technologies. △ Less

Submitted 10 July, 2024; originally announced July 2024.

High-Performance Photon Number Resolving Detectors for 850-950 nm wavelengths

Authors: J. W. N. Los, Mariia Sidorova, B. L. Rodriguez, Patrick Qualm, J. Chang, S. Steinhauer, V. Zwiller, I. Esmaeil Zadeh

Abstract: Since their first demonstration in 2001, superconducting-nanowire single-photon detectors have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon starved fields of optics. Until now, however, in nearly all experiments SNSPDs were used as binary detectors, meaning they can only d… ▽ More Since their first demonstration in 2001, superconducting-nanowire single-photon detectors have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon starved fields of optics. Until now, however, in nearly all experiments SNSPDs were used as binary detectors, meaning they can only distinguish between 0 and more than 1 photons and photon number information is lost. Recent research works have demonstrated proof of principle photon number resolving (PNR) SNSPDs counting 2 to 5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including HOM interference, photonic quantum computing, quantum communication, and non Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850 to 950 nm are of great interest due to the availability of high quality semiconductor quantum dots and high-performance Cesium-based quantum memories. In this paper, we demonstrate NbTiN based SNSPDs with over 94 percent system detection efficiency, sub 11 ps timing jitter for one photon, and sub 7 ps for two photon. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the current PNR performance of our detectors can still be further improved by improving the signal to noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Phonon heat capacity and disorder: new opportunities for performance enhancement of superconducting devices

Authors: M. Sidorova, A. D. Semenov, I. Charaev, M. Gonzalez, A. Schilling, S. Gyger, S. Steinhauer

Abstract: We experimentally study for the first time the self-heating normal domain in magnetic field using nanowires made of granular NbTiN films with sub-10~nm thicknesses. Specifically, we found that at temperatures below 10 K, the heat capacity of phonons in such films is reduced with respect to predictions of the Debye model. Moreover, as the temperature decreases, the phonon heat capacity reduces quic… ▽ More We experimentally study for the first time the self-heating normal domain in magnetic field using nanowires made of granular NbTiN films with sub-10~nm thicknesses. Specifically, we found that at temperatures below 10 K, the heat capacity of phonons in such films is reduced with respect to predictions of the Debye model. Moreover, as the temperature decreases, the phonon heat capacity reduces quicker than the Debye prediction. These effects strengthen when the film thickness decreases. We attribute the observed reduction in the heat capacity to the size effect, which arises from the confinement of phonon modes within the grains; a phenomenon that has been predicted but not yet observed. These findings hold great importance in understanding the role of heat transport in superconducting electronic devices and have the potential for practical applications in mid-infrared photon sensing with superconducting nanowire detectors. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Scalable generation and detection of on-demand W states in nanophotonic circuits

Authors: Jun Gao, Leonardo Santos, Govind Krishna, Ze-Sheng Xu, Adrian Iovan, Stephan Steinhauer, Otfried Gühne, Philip J. Poole, Dan Dalacu, Val Zwiller, Ali W. Elshaari

Abstract: Quantum physics phenomena, entanglement and coherence, are crucial for quantum information protocols, but understanding these in systems with more than two parts is challenging due to increasing complexity. The W state, a multipartite entangled state, is notable for its robustness and benefits in quantum communication. Here, we generate an 8-mode on-demand single photon W states, using nanowire qu… ▽ More Quantum physics phenomena, entanglement and coherence, are crucial for quantum information protocols, but understanding these in systems with more than two parts is challenging due to increasing complexity. The W state, a multipartite entangled state, is notable for its robustness and benefits in quantum communication. Here, we generate an 8-mode on-demand single photon W states, using nanowire quantum dots and a silicon nitride photonic chip. We demonstrate a reliable, scalable technique for reconstructing W-state in photonic circuits using Fourier and real-space imaging, supported by the Gerchberg-Saxton phase retrieval algorithm. Additionally, we utilize an entanglement witness to distinguish between mixed and entangled states, thereby affirming the entangled nature of our generated state. The study provides a new imaging approach of assessing multipartite entanglement in W-states, paving the way for further progress in image processing and Fourier-space analysis techniques for complex quantum systems. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Highly-Excited Rydberg Excitons in Synthetic Thin-Film Cuprous Oxide

Authors: Jacob DeLange, Kinjol Barua, Val Zwiller, Stephan Steinhauer, Hadiseh Alaeian

Abstract: Cuprous oxide (Cu${}_2$O) has recently been proposed as a promising solid-state host for excitonic Rydberg states with large principal quantum numbers ($n$), whose exaggerated wavefunction sizes ($\propto n^2)$ facilitate gigantic dipole-dipole ($\propto n^4$) and van der Waals ($\propto n^{11}$) interactions, making them an ideal basis for solid-state quantum technology. Synthetic, thin-film Cu… ▽ More Cuprous oxide (Cu${}_2$O) has recently been proposed as a promising solid-state host for excitonic Rydberg states with large principal quantum numbers ($n$), whose exaggerated wavefunction sizes ($\propto n^2)$ facilitate gigantic dipole-dipole ($\propto n^4$) and van der Waals ($\propto n^{11}$) interactions, making them an ideal basis for solid-state quantum technology. Synthetic, thin-film Cu${}_2$O samples are of particular interest because they can be made defect-free via carefully controlled fabrication and are, in principle, suitable for the observation of extreme single-photon nonlinearities caused by the Rydberg blockade. Here, we present spectroscopic absorption and photoluminescence studies of Rydberg excitons in synthetic Cu${}_2$O grown on a transparent substrate, reporting yellow exciton series up to $n = 7$. We perform these studies at powers up to 2 mW and temperatures up to 150 K, the highest temperature where Rydberg series can be observed. These results open a new portal to scalable and integrable on-chip Rydberg-based quantum devices. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Comments: 10 pages, 5 figures

Nanosecond gating of superconducting nanowire single-photon detectors using cryogenic bias circuitry

Authors: Thomas Hummel, Alex Widhalm, Jan Philipp HÖpker, Klaus D. JÖns, ** Chang, Andreas Fognini, Stephan Steinhauer, Val Zwiller, Artur Zrenner, Tim J. Bartley

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD wit… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) show near unity efficiency, low dark count rate, and short recovery time. Combining these characteristics with temporal control of SNSPDs broadens their applications as in active de-latching for higher dynamic range counting or temporal filtering for pump-probe spectroscopy or LiDAR. To that end, we demonstrate active gating of an SNSPD with a minimum off-to-on rise time of 2.4 ns and a total gate length of 5.0 ns. We show how the rise time depends on the inductance of the detector in combination with the control electronics. The gate window is demonstrated to be fully and freely, electrically tunable up to 500 ns at a repetition rate of 1.0 MHz, as well as ungated, free-running operation. Control electronics to generate the gating are mounted on the 2.3 K stage of a closed-cycle sorption cryostat, while the detector is operated on the cold stage at 0.8 K. We show that the efficiency and timing jitter of the detector is not altered during the on-time of the gating window. We exploit gated operation to demonstrate a method to increase in the photon counting dynamic range by a factor 11.2, as well as temporal filtering of a strong pump in an emulated pump-probe experiment. △ Less

Submitted 26 October, 2022; originally announced October 2022.

Phonon heat capacity and self-heating normal domains in NbTiN nanostrips

Authors: M. Sidorova, A. D. Semenov, H. -W. Huebers, S. Gyger, S. Steinhauer

Abstract: Self-heating normal domains in thin superconducting NbTiN nanostrips were characterized via steady-state hysteretic current-voltage characteristics measured at different substrate temperatures. The temperature dependence and the magnitude of the current, which sustains a domain in equilibrium at different voltages, can only be explained with a phonon heat capacity noticeably less than expected for… ▽ More Self-heating normal domains in thin superconducting NbTiN nanostrips were characterized via steady-state hysteretic current-voltage characteristics measured at different substrate temperatures. The temperature dependence and the magnitude of the current, which sustains a domain in equilibrium at different voltages, can only be explained with a phonon heat capacity noticeably less than expected for 3-d Debye phonons. This reduced heat capacity coincides with the value obtained earlier from magnetoconductance and photoresponse studies of the same films. The rate of heat flow from electrons at a temperature Te to phonons in the substrate at a temperature TB is proportional to (T_e^p - T_B^p) with the exponent p~3, which differs from the exponents for heat flows mediated by the electron-phonon interaction or by esca** of 3-d Debye phonons via the film/substrate interface. We attribute both findings to the effect of the mean grain size on the phonon spectrum of thin granular NbTiN films. Our findings are significant for understanding the thermal transport in superconducting devices exploiting thin granular films. △ Less

Submitted 4 April, 2022; originally announced April 2022.

2022 Roadmap for Materials for Quantum Technologies

Authors: Christoph Becher, Weibo Gao, Swastik Kar, Christian Marciniak, Thomas Monz, John G. Bartholomew, Philippe Goldner, Huanqian Loh, Elizabeth Marcellina, Kuan Eng Johnson Goh, Teck Seng Koh, Bent Weber, Zhao Mu, Jeng-Yuan Tsai, Qimin Yan, Samuel Gyger, Stephan Steinhauer, Val Zwiller

Abstract: Quantum technologies are poised to move the foundational principles of quantum physics to the forefront of applications. This roadmap identifies some of the key challenges and provides insights on materials innovations underlying a range of exciting quantum technology frontiers. Over the past decades, hardware platforms enabling different quantum technologies have reached varying levels of maturit… ▽ More Quantum technologies are poised to move the foundational principles of quantum physics to the forefront of applications. This roadmap identifies some of the key challenges and provides insights on materials innovations underlying a range of exciting quantum technology frontiers. Over the past decades, hardware platforms enabling different quantum technologies have reached varying levels of maturity. This has allowed for first proof-of-principle demonstrations of quantum supremacy, for example quantum computers surpassing their classical counterparts, quantum communication with reliable security guaranteed by laws of quantum mechanics, and quantum sensors uniting the advantages of high sensitivity, high spatial resolution, and small footprints. In all cases, however, advancing these technologies to the next level of applications in relevant environments requires further development and innovations in the underlying materials. From a wealth of hardware platforms, we select representative and promising material systems in currently investigated quantum technologies. These include both the inherent quantum bit systems as well as materials playing supportive or enabling roles, and cover trapped ions, neutral atom arrays, rare earth ion systems, donors in silicon, color centers and defects in wide-band gap materials, two-dimensional materials and superconducting materials for single-photon detectors. Advancing these materials frontiers will require innovations from a diverse community of scientific expertise, and hence this roadmap will be of interest to a broad spectrum of disciplines. △ Less

Submitted 15 February, 2022; originally announced February 2022.

Current crowding in nanoscale superconductors within the Ginzburg-Landau model

Authors: Mattias Jönsson, Robert Vedin, Samuel Gyger, James A. Sutton, Stephan Steinhauer, Val Zwiller, Mats Wallin, Jack Lidmar

Abstract: The current density in a superconductor with turnarounds or constrictions is non-uniform due to a geometrical current crowding effect. This effect reduces the critical current in the superconducting structure compared to a straight segment and is of importance when designing superconducting devices. We investigate the current crowding effect in numerical simulations within the generalized time-dep… ▽ More The current density in a superconductor with turnarounds or constrictions is non-uniform due to a geometrical current crowding effect. This effect reduces the critical current in the superconducting structure compared to a straight segment and is of importance when designing superconducting devices. We investigate the current crowding effect in numerical simulations within the generalized time-dependent Ginzburg-Landau (GTDGL) model. The results are validated experimentally by measuring the magnetic field dependence of the critical current in superconducting nanowire structures, similar to those employed in single-photon detector devices. Comparing the results with London theory, we conclude that the reduction in critical current is significantly smaller in the GTDGL model. This difference is attributed to the current redistribution effect, which reduces the current density in weak points of the superconductor and counteracts the current crowding effect. We numerically investigate the effect of fill factor on the critical current in a meander and conclude that the reduction of critical current is low enough to justify fill factors higher than $33\,\%$ for applications where detection efficiency is critical. Finally, we propose a novel meander design which can combine high fill factor and low current crowding. △ Less

Submitted 28 February, 2022; v1 submitted 10 December, 2021; originally announced December 2021.

Comments: 8 pages and 5 figures

Magnetoconductance and photoresponse properties of disordered NbTiN films

Authors: M. Sidorova, A. Semenov, H. -W. Huebers, S. Gyger, S. Steinhauer, X. Zhang, A. Schilling

Abstract: We report on the study of phonon properties and electron-phonon coupling in thin NbTiN films, which are intensively exploited in superconducting devices. Studied NbTiN films with thicknesses less than 10~nm are disordered with respect to electron transport, the Ioffe-Regel parameter of $k_F l_e = 2.5-3.0$ ($k_F$ is the Fermi wave vector and $l_e$ is the electron mean free path), and inelastic elec… ▽ More We report on the study of phonon properties and electron-phonon coupling in thin NbTiN films, which are intensively exploited in superconducting devices. Studied NbTiN films with thicknesses less than 10~nm are disordered with respect to electron transport, the Ioffe-Regel parameter of $k_F l_e = 2.5-3.0$ ($k_F$ is the Fermi wave vector and $l_e$ is the electron mean free path), and inelastic electron-phonon interaction, the product $q_T l_e \ll 1$ ($q_T$ is the wave vector of a thermal phonon). By means of magnetoconductance and photoresponse techniques, we derived the inelastic electron-phonon scattering rate $1/τ_{e-ph}$ and determined sound velocities and phonon heat capacities. In the temperature range from 12 to 20~K, the scattering rate varies with temperature as $1/τ_{e-ph}\propto T^{3.45\pm0.05}$; its value extrapolated to 10~K amounts to approximately 16~ps. Making a comparative analysis of our films and other films used in superconducting devices, such as polycrystalline granular NbN and amorphous WSi, we found a systematic reduction of the sound velocity in all these films by about 50\% as compared to the corresponding bulk crystalline materials. A corresponding increase in the phonon heat capacities in all these films is, however, less than the Debye model predicts. We attribute these findings to reduced film dimensionality and film morphology. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Mid-infrared Single-photon Detection Using Superconducting NbTiN Nanowires with Sub-15 ps Time Resolution in a Gifford-McMahon Cryocooler

Authors: ** Chang, Johannes W. N. Los, Ronan Gourgues, Stephan Steinhauer, S. N. Dorenbos, Silvania F. Pereira, H. Paul Urbach, Val Zwiller, Iman Esmaeil Zadeh

Abstract: Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons… ▽ More Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time resolution, low dark count rate, and fast recovery time, SNSPDs outperform conventional single-photon detection techniques. However, detecting lower energy single-photons (<0.8 eV) with high efficiency and low timing jitter has remained a challenge. To achieve unity internal efficiency at mid-infrared wavelengths, previous works used amorphous superconducting materials with low energy gaps at the expense of reduced time resolution (close to a nanosecond), and by operating them in complex mK dilution refrigerators. In this work, we provide an alternative approach with SNSPDs fabricated from 5-9.5 nm thick NbTiN superconducting films and devices operated in conventional Gifford-McMahon (GM) cryocoolers. By optimizing the superconducting film deposition process, film thickness and nanowire design, our fiber-coupled devices achieved > 70% system detection efficiency (SDE) at 2 μm and sub-15 ps timing jitter. Furthermore, detectors from the same batch demonstrated unity internal detection efficiency at 3 μm and 80% internal efficiency at 4 μm, paving the road for an efficient mid-infrared single-photon detection technology with unparalleled time resolution and without mK cooling requirements. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Giant Rydberg excitons in Cu$_{2}$O probed by photoluminescence excitation spectroscopy

Authors: Marijn A. M. Versteegh, Stephan Steinhauer, Josip Bajo, Thomas Lettner, Ariadna Soro, Alena Romanova, Samuel Gyger, Lucas Schweickert, André Mysyrowicz, Val Zwiller

Abstract: Rydberg excitons are, with their ultrastrong mutual interactions, giant optical nonlinearities, and very high sensitivity to external fields, promising for applications in quantum sensing and nonlinear optics at the single-photon level. To design quantum applications it is necessary to know how Rydberg excitons and other excited states relax to lower-lying exciton states. Here, we present photolum… ▽ More Rydberg excitons are, with their ultrastrong mutual interactions, giant optical nonlinearities, and very high sensitivity to external fields, promising for applications in quantum sensing and nonlinear optics at the single-photon level. To design quantum applications it is necessary to know how Rydberg excitons and other excited states relax to lower-lying exciton states. Here, we present photoluminescence excitation spectroscopy as a method to probe transition probabilities from various excitonic states in cuprous oxide, and we show giant Rydberg excitons at $T=38$ mK with principal quantum numbers up to $n=30$, corresponding to a calculated diameter of 3 $μ$m. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: 11 pages, 4 figures

Roadmap on Integrated Quantum Photonics

Authors: Galan Moody, Volker J. Sorger, Daniel J. Blumenthal, Paul W. Juodawlkis, William Loh, Cheryl Sorace-Agaskar, Alex E. Jones, Krishna C. Balram, Jonathan C. F. Matthews, Anthony Laing, Marcelo Davanco, Lin Chang, John E. Bowers, Niels Quack, Christophe Galland, Igor Aharonovich, Martin A. Wolff, Carsten Schuck, Neil Sinclair, Marko Lončar, Tin Komljenovic, David Weld, Shayan Mookherjea, Sonia Buckley, Marina Radulaski , et al. (30 additional authors not shown)

Abstract: Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required… ▽ More Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required functionality and performance, can only be realized through the integration of these components onto quantum photonic integrated circuits (QPICs) with accompanying electronics. In the last decade, remarkable advances in quantum photonic integration and a dramatic reduction in optical losses have enabled benchtop experiments to be scaled down to prototype chips with improvements in efficiency, robustness, and key performance metrics. The reduction in size, weight, power, and improvement in stability that will be enabled by QPICs will play a key role in increasing the degree of complexity and scale in quantum demonstrations. In the next decade, with sustained research, development, and investment in the quantum photonic ecosystem (i.e. PIC-based platforms, devices and circuits, fabrication and integration processes, packaging, and testing and benchmarking), we will witness the transition from single- and few-function prototypes to the large-scale integration of multi-functional and reconfigurable QPICs that will define how information is processed, stored, transmitted, and utilized for quantum computing, communications, metrology, and sensing. This roadmap highlights the current progress in the field of integrated quantum photonics, future challenges, and advances in science and technology needed to meet these challenges. △ Less

Submitted 22 September, 2021; v1 submitted 5 February, 2021; originally announced February 2021.

Comments: Submitted to the Journal of Physics: Photonics

Journal ref: J. Phys. Photonics 4 012501 (2022)

Fractal superconducting nanowires detect infrared single photons with 84% system detection efficiency, 1.02 polarization sensitivity, and 20.8 ps timing resolution

Authors: Yun Meng, Kai Zou, Nan Hu, Liang Xu, Xiaojian Lan, Stephan Steinhauer, Samuel Gyger, Val Zwiller, Xiaolong Hu

Abstract: The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the m… ▽ More The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental for photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84$\pm$3$\%$ SDE, 1.02$^{+0.06}_{-0.02}$ polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1-W closed-cycle Gifford-McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution △ Less

Submitted 31 March, 2022; v1 submitted 12 December, 2020; originally announced December 2020.

Comments: 8 pages, 4 figures

Reconfigurable quantum photonics with on-chip detectors

Authors: Samuel Gyger, Julien Zichi, Lucas Schweickert, Ali W. Elshaari, Stephan Steinhauer, Saimon F. Covre da Silva, Armando Rastelli, Val Zwiller, Klaus D. Jöns, Carlos Errando-Herranz

Abstract: Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits,… ▽ More Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits, allow feedback and adaptive control, crucial for deterministic quantum teleportation, training of neural networks, and stabilization of complex circuits. However, the heat generated by thermally reconfigurable photonics is incompatible with heat-sensitive superconducting single-photon detectors, and thus their on-chip co-integration remains elusive. Here we show low-power microelectromechanical reconfiguration of integrated photonic circuits interfaced with superconducting single-photon detectors on the same chip. We demonstrate three key functionalities for photonic quantum technologies: 28 dB high-extinction routing of classical and quantum light, 90 dB high-dynamic range single-photon detection, and stabilization of optical excitation over 12 dB power variation. Our platform enables heat-load free reconfigurable linear optics and adaptive control, critical for quantum state preparation and quantum logic in large-scale quantum photonics applications. △ Less

Submitted 13 July, 2020; originally announced July 2020.

On-demand generation of entangled photon pairs in the telecom C-band for fiber-based quantum networks

Authors: Katharina D. Zeuner, Klaus D. Jöns, Lucas Schweickert, Carl Reuterskiöld Hedlund, Carlos Nuñez Lobato, Thomas Lettner, Kai Wang, Samuel Gyger, Eva Schöll, Stephan Steinhauer, Mattias Hammar, Val Zwiller

Abstract: On-demand sources of entangled photons for the transmission of quantum information in the telecom C-band are required to realize fiber-based quantum networks. So far, non-deterministic sources of quantum states of light were used for long distance entanglement distribution in this lowest loss wavelength range. However, they are fundamentally limited in either efficiency or security due to their Po… ▽ More On-demand sources of entangled photons for the transmission of quantum information in the telecom C-band are required to realize fiber-based quantum networks. So far, non-deterministic sources of quantum states of light were used for long distance entanglement distribution in this lowest loss wavelength range. However, they are fundamentally limited in either efficiency or security due to their Poissonian emission statistics. Here, we show on-demand generation of entangled photon pairs in the telecom C-band by an InAs/GaAs semiconductor quantum dot. Using a robust phonon-assisted excitation scheme we measure a concurrence of $91.4\,\%$ and a fidelity of $95.2\,\%$ to $Φ^+$. On-demand generation of polarization entangled photons will enable secure quantum communication in fiber-based networks. Furthermore, applying this excitation scheme to several remote quantum dots tuned into resonance will enable first on-demand entanglement distribution over large distances for scalable real-life quantum applications. △ Less

Submitted 10 December, 2019; originally announced December 2019.

Comments: 10 pages, 4 figures

Proximitized Josephson junctions in highly-doped InAs nanowires robust to optical illumination

Authors: Lily Yang, Stephan Steinhauer, Elia Strambini, Thomas Lettner, Lucas Schweickert, Marijn A. M. Versteegh, Francesco Giazotto, Valentina Zannier, Lucia Sorba, Dmitry Solenov

Abstract: We have studied the effects of optical-frequency light on proximitized InAs/Al Josephson junctions based on highly n-doped InAs nanowires at varying incident photon flux and at three different photon wavelengths. The experimentally obtained IV curves were modeled using a shunted junction model which takes scattering at the contact interfaces into account. The Josephson junctions were found to be s… ▽ More We have studied the effects of optical-frequency light on proximitized InAs/Al Josephson junctions based on highly n-doped InAs nanowires at varying incident photon flux and at three different photon wavelengths. The experimentally obtained IV curves were modeled using a shunted junction model which takes scattering at the contact interfaces into account. The Josephson junctions were found to be surprisingly robust, interacting with the incident radiation only through heating, whereas above the critical current our devices showed non-thermal effects resulting from photon exposure. Our work provides important guidelines for the co-integration of Josephson junctions alongside quantum photonic circuits and lays the foundation for future work on nanowire-based hybrid photon detectors. △ Less

Submitted 17 September, 2019; originally announced September 2019.

Nb$_x$Ti$_{1-x}$N low timing jitter single-photon detectors with unity internal efficiency at 1550 nm and 2.5 K

Authors: Julien Zichi, ** Chang, Stephan Steinhauer, Kristina von Fieandt, Johannes W. N. Los, Gijs Visser, Nima Kalhor, Thomas Lettner, Ali. W. Elshaari, Iman Esmaeil Zadeh, Val Zwiller

Abstract: The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly… ▽ More The requirements in quantum optics experiments for high single photon detection efficiency, low timing jitter, low dark count rate and short dead time have been fulfilled with the development of superconducting nanowire single photon detectors. Although they offer a detection efficiency above 90%, achieving a high time resolution in devices made of amorphous materials is a challenge, particularly at temperatures above 0.8 K. Devices made from niobium nitride and niobium titanium nitride allow to reach the best timing jitter, but in turn have stronger requirements in terms of film quality to achieve a high efficiency. Here we take advantage of the flexibility of reactive co-sputter deposition to tailor the composition of NbxTi1-xN superconducting films, and show that a Nb fraction of x = 0.62 allows for the fabrication of detectors from films as thick as 9 nm and covering an active area of 20 μm, with a wide detection saturation plateau at telecom wavelengths and in particular at 1550 nm. This is a signature of an internal detection efficiency saturation, achieved while maintaining the high time resolution associated with NbTiN and operation at 2.5K. With our optimized recipe, we reliably fabricated detectors with high critical current densities reaching a saturation plateau at 1550 nm with 80% system detection efficiency, and with a FWHM timing jitter as low as 19.47 ps. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: 8 pages, 4 figures, 1 table

Cu$_2$O Microcrystals Grown on Silicon as Platform for Quantum-Degenerate Excitons and Rydberg States

Authors: Stephan Steinhauer, Marijn A. M. Versteegh, André Mysyrowicz, Birgit Kunert, Val Zwiller

Abstract: Cuprous oxide (Cu$_2$O) is a semiconductor with large exciton binding energy and significant technological importance in applications such as photovoltaics and solar water splitting. It is also a superior material system for quantum optics that enabled the observation of two intriguing phenomena, i.e. Rydberg excitons as solid-state analogue to highly-excited atomic states and dense exciton gases… ▽ More Cuprous oxide (Cu$_2$O) is a semiconductor with large exciton binding energy and significant technological importance in applications such as photovoltaics and solar water splitting. It is also a superior material system for quantum optics that enabled the observation of two intriguing phenomena, i.e. Rydberg excitons as solid-state analogue to highly-excited atomic states and dense exciton gases showing quantum degeneracy when approaching the phase transition to Bose-Einstein condensation. Previous experiments focused on natural bulk crystals due to major difficulties in growing high-quality synthetic samples. Here, we present Cu$_2$O microcrystals with excellent optical material quality capable of hosting both quantum-degenerate excitons and excited Rydberg states. Growth of Cu$_2$O with exceedingly low point defect levels was achieved on silicon by a scalable thermal oxidation process compatible with lithographic patterning. Using the latter, we demonstrate Rydberg excitons in site-controlled Cu$_2$O microstructures, paving the way for a plethora of applications in integrated quantum photonics. △ Less

Submitted 5 February, 2019; originally announced February 2019.

Journal ref: A modified version of this paper has been published as Communications Materials 1, 11 (2020)

A stable wavelength-tunable triggered source of single photons and cascaded photon pairs at the telecom C-band

Authors: Katharina D. Zeuner, Matthias Paul, Thomas Lettner, Carl Reuterskiöld Hedlund, Lucas Schweickert, Stephan Steinhauer, Lily Yang, Julien Zichi, Mattias Hammar, Klaus D. Jöns, Val Zwiller

Abstract: The implementation of fiber-based long-range quantum communication requires tunable sources of single photons at the telecom C-band. Stable and easy-to-implement wavelength- tunability of individual sources is crucial to (i) bring remote sources into resonance, to (ii) define a wavelength standard and to (iii) ensure scalability to operate a quantum repeater. So far, the most promising sources for… ▽ More The implementation of fiber-based long-range quantum communication requires tunable sources of single photons at the telecom C-band. Stable and easy-to-implement wavelength- tunability of individual sources is crucial to (i) bring remote sources into resonance, to (ii) define a wavelength standard and to (iii) ensure scalability to operate a quantum repeater. So far, the most promising sources for true, telecom single photons are semiconductor quantum dots, due to their ability to deterministically and reliably emit single and entangled photons. However, the required wavelength-tunability is hard to attain. Here, we show a stable wavelength-tunable quantum light source by integrating strain-released InAs quantum dots on piezoelectric substrates. We present triggered single-photon emission at 1.55 μm with a multiphoton emission probability as low as 0.097, as well as photon pair emission from the radiative biexciton-exciton cascade. We achieve a tuning range of 0.25 nm which will allow to spectrally overlap remote quantum dots or tuning distant quantum dots into resonance with quantum memories. This opens up realistic avenues for the implementation of photonic quantum information processing applications at telecom wavelengths. △ Less

Submitted 4 January, 2018; originally announced January 2018.

Comments: 5 pages, 3 figures

Journal ref: Appl. Phys. Lett. 112, 173102 (2018)