Showing 1–30 of 30 results for author: Steiger, S

Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities

Authors: Bertrand Mennesson, Ruslan Belikov, Emiel Por, Eugene Serabyn, Garreth Ruane, A. J. Eldorado Riggs, Dan Sirbu, Laurent Pueyo, Remi Soummer, Jeremy Kasdin, Stuart Shaklan, Byoung-Joon Seo, Christopher Stark, Eric Cady, Pin Chen, Brendan Crill, Kevin Fogarty, Alexandra Greenbaum, Olivier Guyon, Roser Juanola-Parramon, Brian Kern, John Krist, Bruce Macintosh, David Marx, Dimitri Mawet , et al. (12 additional authors not shown)

Abstract: We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis t… ▽ More We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations. △ Less

Submitted 27 April, 2024; originally announced April 2024.

Comments: 63 pages, 28 pages, submitted to JATIS

Sparse Simulation of VQE Circuits for Quantum Chemistry

Authors: Damian S. Steiger, Thomas Häner, Scott N. Genin, Helmut G. Katzgraber

Abstract: The Variational Quantum Eigensolver (VQE) is a promising algorithm for future Noisy Intermediate-Scale Quantum (NISQ) devices to simulate chemical systems. In this paper, we consider the classical simulation of the iterative Qubit Coupled Cluster (iQCC) ansatz. To this end, we implement a multi-threaded sparse wave function simulator and simulate iQCC circuits with up to 80 qubits and 980 entangle… ▽ More The Variational Quantum Eigensolver (VQE) is a promising algorithm for future Noisy Intermediate-Scale Quantum (NISQ) devices to simulate chemical systems. In this paper, we consider the classical simulation of the iterative Qubit Coupled Cluster (iQCC) ansatz. To this end, we implement a multi-threaded sparse wave function simulator and simulate iQCC circuits with up to 80 qubits and 980 entanglers to compare our results to experimental values and previous approximate simulations. In contrast to previous iQCC simulations, e.g., for computing the emission spectra of a phosphorescent emitting material, our approach features a variational guarantee, such that the resulting energies are true upper bounds on the exact energies. Additionally, our method is two orders of magnitude more memory-efficient, because it does not store the transformed Hamiltonians. Our theoretical analysis also enables the construction of ansätze with a limited number of nonzero amplitudes, for which our simulator can obtain exact results. This will allow one to generate complex benchmarking instances for future NISQ quantum computers and simulators. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Parallel Tempering for Logic Synthesis

Authors: Thomas Häner, Damian S. Steiger, Helmut G. Katzgraber

Abstract: The task of logic synthesis is to map a technology-independent representation of an application to hardware-specific operations, taking into account various constraints and trading off different costs associated with the implementation. Constraints may include the target gate library and feasible connectivity, whereas the costs capture, for example, the required chip area and delay. Here we propos… ▽ More The task of logic synthesis is to map a technology-independent representation of an application to hardware-specific operations, taking into account various constraints and trading off different costs associated with the implementation. Constraints may include the target gate library and feasible connectivity, whereas the costs capture, for example, the required chip area and delay. Here we propose to use parallel tempering Monte Carlo to find low-level implementations of a given Boolean function. In contrast to previous work leveraging Markov chain Monte Carlo methods such as simulated annealing, we do not start with an initially correct (but suboptimal) implementation that is then further optimized. Instead, our approach starts with a random logic network that is subsequently modified in order to reduce the error to zero. We apply our method to the task of synthesizing Majority-$n$ in terms of Majority-$3$ gates with and without inverters, aiming for a low Majority-$3$ count. Our method is able to find solutions that are on par or better than previously known solutions. For example, for $n\in\{9,11,13\}$ our approach successfully finds inverter-free implementations using between 7% and 42% fewer Majority-$3$ gates. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Probing Photon Statistics in Adaptive Optics Images with SCExAO/MEC

Authors: Sarah Steiger, Timothy D. Brandt, Olivier Guyon, Noah Swimmer, Alexander B. Walter, Clinton Bockstiegel, Julien Lozi, Vincent Deo, Sebastien Vievard, Nour Skaf, Kyohoon Ahn, Nemanja Jovanovic, Frantz Martinache, Benjamin A. Mazin

Abstract: We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-… ▽ More We present an experimental study of photon statistics for high-contrast imaging with the Microwave Kinetic Inductance Detector (MKID) Exoplanet Camera (MEC) located behind the Subaru Coronagraphic Extreme Adaptive Optics System (SCExAO) at the Subaru Telescope. We show that MEC measures the expected distributions for both on-axis companion intensity and off-axis intensity which manifests as quasi-static speckles in the image plane and currently limits high-contrast imaging performance. These statistics can be probed by any MEC observation due to the photon-counting capabilities of MKID detectors. Photon arrival time statistics can also be used to directly distinguish companions from speckles using a post-processing technique called Stochastic Speckle Discrimination (SSD). Here, we we give an overview of the SSD technique and highlight the first demonstration of SSD on an extended source -- the protoplanetary disk AB Aurigae. We then present simulations that provide an in-depth exploration as to the current limitations of an extension of the SSD technique called Photon-Counting SSD (PCSSD) to provide a path forward for transitioning PCSSD from simulations to on-sky results. We end with a discussion of how to further improve the efficacy of such arrival time based post-processing techniques applicable to both MKIDs, as well as other high speed astronomical cameras. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 11 pages, 9 figures, accepted for publication in AJ

SCExAO and Keck Direct Imaging Discovery of a Low-Mass Companion Around the Accelerating F5 Star HIP 5319

Authors: Noah Swimmer, Thayne Currie, Sarah Steiger, Gregory Mirek Brandt, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Taylor Tobin, Tyler D. Groff, Julien Lozi, John I. Bailey III, Alexander B. Walter, Neelay Fruitwala, Nicholas Zobrist, Jennifer Pearl Smith, Gregoire Coiffard, Rupert Dodkins, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Nour Skaf, Vincent Deo, Nemanja Jovanovic , et al. (4 additional authors not shown)

Abstract: We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of… ▽ More We present the direct imaging discovery of a low-mass companion to the nearby accelerating F star, HIP 5319, using SCExAO coupled with the CHARIS, VAMPIRES, and MEC instruments in addition to Keck/NIRC2 imaging. CHARIS $JHK$ (1.1-2.4 $μ$m) spectroscopic data combined with VAMPIRES 750 nm, MEC $Y$, and NIRC2 $L_{\rm p}$ photometry is best matched by an M3--M7 object with an effective temperature of T=3200 K and surface gravity log($g$)=5.5. Using the relative astrometry for HIP 5319 B from CHARIS and NIRC2 and absolute astrometry for the primary from $Gaia$ and $Hipparcos$ and adopting a log-normal prior assumption for the companion mass, we measure a dynamical mass for HIP 5319 B of $31^{+35}_{-11}M_{\rm J}$, a semimajor axis of $18.6^{+10}_{-4.1}$ au, an inclination of $69.4^{+5.6}_{-15}$ degrees, and an eccentricity of $0.42^{+0.39}_{-0.29}$. However, using an alternate prior for our dynamical model yields a much higher mass of 128$^{+127}_{-88}M_{\rm J}$. Using data taken with the LCOGT NRES instrument we also show that the primary HIP 5319 A is a single star in contrast to previous characterizations of the system as a spectroscopic binary. This work underscores the importance of assumed priors in dynamical models for companions detected with imaging and astrometry and the need to have an updated inventory of system measurements. △ Less

Submitted 30 July, 2022; originally announced August 2022.

Comments: 19 pages, 9 figuresm 5 tables

The MKID Science Data Pipeline

Authors: Sarah Steiger, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Rupert Dodkins, Kristina K. Davis, Benjamin A. Mazin

Abstract: We present The MKID Pipeline, a general use science data pipeline for the reduction and analysis of ultraviolet, optical and infrared (UVOIR) Microwave Kinetic Inductance Detector (MKID) data sets. This paper provides an introduction to the nature of MKID data sets, an overview of the calibration steps included in the pipeline, and an introduction to the implementation of the software. We present The MKID Pipeline, a general use science data pipeline for the reduction and analysis of ultraviolet, optical and infrared (UVOIR) Microwave Kinetic Inductance Detector (MKID) data sets. This paper provides an introduction to the nature of MKID data sets, an overview of the calibration steps included in the pipeline, and an introduction to the implementation of the software. △ Less

Submitted 2 March, 2022; originally announced March 2022.

Comments: 12 pages, 8 figures

Prolonged orbital relaxation by locally modified phonon density of states for SiV$^-$ center in nanodiamonds

Authors: Marco Klotz, Konstantin G. Fehler, Elena S. Steiger, Stefan Häußler, Richard Waltrich, Prithvi Reddy, Liudmila F. Kulikova, Valery A. Davydov, Viatcheslav N. Agafonov, Marcus W. Doherty, Alexander Kubanek

Abstract: Coherent quantum systems are a key resource for emerging quantum technology. Solid-state spin systems are of particular importance for compact and scalable devices. However, interaction with the solid-state host degrades the coherence properties. The negatively-charged silicon vacancy center in diamond is such an example. While spectral properties are outstanding, with optical coherence protected… ▽ More Coherent quantum systems are a key resource for emerging quantum technology. Solid-state spin systems are of particular importance for compact and scalable devices. However, interaction with the solid-state host degrades the coherence properties. The negatively-charged silicon vacancy center in diamond is such an example. While spectral properties are outstanding, with optical coherence protected by the defects symmetry, the spin coherence is susceptible to rapid orbital relaxation limiting the spin dephasing time. A prolongation of the orbital relaxation time is therefore of utmost urgency and has been tackled by operating at very low temperatures or by introducing large strain. However, both methods have significant drawbacks, the former requires use of dilution refrigerators and the latter affects intrinsic symmetries. Here, a novel method is presented to prolong the orbital relaxation with a locally modified phonon density of states in the relevant frequency range, by restricting the diamond host to below 100 nm. The method works at liquid Helium temperatures of few Kelvin and in the low-strain regime. △ Less

Submitted 2 August, 2021; v1 submitted 30 July, 2021; originally announced July 2021.

Distributed Quantum Computing with QMPI

Authors: Thomas Häner, Damian S. Steiger, Torsten Hoefler, Matthias Troyer

Abstract: Practical applications of quantum computers require millions of physical qubits and it will be challenging for individual quantum processors to reach such qubit numbers. It is therefore timely to investigate the resource requirements of quantum algorithms in a distributed setting, where multiple quantum processors are interconnected by a coherent network. We introduce an extension of the Message P… ▽ More Practical applications of quantum computers require millions of physical qubits and it will be challenging for individual quantum processors to reach such qubit numbers. It is therefore timely to investigate the resource requirements of quantum algorithms in a distributed setting, where multiple quantum processors are interconnected by a coherent network. We introduce an extension of the Message Passing Interface (MPI) to enable high-performance implementations of distributed quantum algorithms. In turn, these implementations can be used for testing, debugging, and resource estimation. In addition to a prototype implementation of quantum MPI, we present a performance model for distributed quantum computing, SENDQ. The model is inspired by the classical LogP model, making it useful to inform algorithmic decisions when programming distributed quantum computers. Specifically, we consider several optimizations of two quantum algorithms for problems in physics and chemistry, and we detail their effects on performance in the SENDQ model. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Journal ref: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis. SC 2021. Article No.: 16

SCExAO/MEC and CHARIS Discovery of a Low Mass, 6 AU-Separation Companion to HIP 109427 using Stochastic Speckle Discrimination and High-Contrast Spectroscopy

Authors: Sarah Steiger, Thayne Currie, Timothy D. Brandt, Olivier Guyon, Masayuki Kuzuhara, Jeffrey Chilcote, Tyler D. Groff, Julien Lozi, Alexander B. Walter, Neelay Fruitwala, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Clint Bockstiegel, Seth R. Meeker, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Sebastien Vievard, Ananya Sahoo , et al. (6 additional authors not shown)

Abstract: We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band a… ▽ More We report the direct imaging discovery of a low-mass companion to the nearby accelerating A star, HIP 109427, with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument coupled with the MKID Exoplanet Camera (MEC) and CHARIS integral field spectrograph. CHARIS data reduced with reference star PSF subtraction yield 1.1-2.4 $μ$m spectra. MEC reveals the companion in $Y$ and $J$ band at a comparable signal-to-noise ratio using stochastic speckle discrimination, with no PSF subtraction techniques. Combined with complementary follow-up $L_{\rm p}$ photometry from Keck/NIRC2, the SCExAO data favors a spectral type, effective temperature, and luminosity of M4-M5.5, 3000-3200 $K$, and $\log_{10}(L/L_{\rm \odot}) = -2.28^{+0.04}_{-0.04}$, respectively. Relative astrometry of HIP 109427 B from SCExAO/CHARIS and Keck/NIRC2, and complementary Gaia-Hipparcos absolute astrometry of the primary favor a semimajor axis of $6.55^{+3.0}_{-0.48}$ au, an eccentricity of $0.54^{+0.28}_{-0.15}$, an inclination of $66.7^{+8.5}_{-14}$ degrees, and a dynamical mass of $0.280^{+0.18}_{-0.059}$ $M_{\odot}$. This work shows the potential for extreme AO systems to utilize speckle statistics in addition to widely-used post-processing methods to directly image faint companions to nearby stars near the telescope diffraction limit. △ Less

Submitted 12 July, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 13 pages, 7 figures, 3 tables

Journal ref: The Astronomical Journal, Volume 162, Number 2, 2021

Prospects of Quantum Computing for Molecular Sciences

Authors: Hongbin Liu, Guang Hao Low, Damian S. Steiger, Thomas Häner, Markus Reiher, Matthias Troyer

Abstract: Molecular science is governed by the dynamics of electrons, atomic nuclei, and their interaction with electromagnetic fields. A reliable physicochemical understanding of these processes is crucial for the design and synthesis of chemicals and materials of economic value. Although some problems in this field are adequately addressed by classical mechanics, many require an explicit quantum mechanica… ▽ More Molecular science is governed by the dynamics of electrons, atomic nuclei, and their interaction with electromagnetic fields. A reliable physicochemical understanding of these processes is crucial for the design and synthesis of chemicals and materials of economic value. Although some problems in this field are adequately addressed by classical mechanics, many require an explicit quantum mechanical description. Such quantum problems represented by exponentially large wave function should naturally benefit from quantum computation on a number of logical qubits that scales only linearly with system size. In this perspective, we focus on the potential of quantum computing for solving relevant problems in the molecular sciences -- molecular physics, chemistry, biochemistry, and materials science. △ Less

Submitted 17 May, 2021; v1 submitted 19 February, 2021; originally announced February 2021.

Journal ref: Materials Theory 6, article number: 11 (2022)

A Robust Coherent Single-Photon Interface for Moderate- NA Optics Based on SiV Center in Nanodiamonds and a Plasmonic Bullseye Antenna

Authors: Richard Waltrich, Hamza Abudayyeh, Boaz Lubotzky, Elena S. Steiger, Konstantin G. Fehler, Niklas Lettner, Valery A. Davydov, Viatcheslav N. Agafonov, Ronen Rapaport, Alexander Kubanek

Abstract: Coherent exchange of single photons is at the heart of applied Quantum Optics. The negatively-charged silicon vacancy center in diamond is among most promising sources for coherent single photons. Its large Debye-Waller factor, short lifetime and extraordinary spectral stability is unique in the field of solid-state single photon sources. However, the excitation and detection of individual centers… ▽ More Coherent exchange of single photons is at the heart of applied Quantum Optics. The negatively-charged silicon vacancy center in diamond is among most promising sources for coherent single photons. Its large Debye-Waller factor, short lifetime and extraordinary spectral stability is unique in the field of solid-state single photon sources. However, the excitation and detection of individual centers requires high numerical aperture optics which, combined with the need for cryogenic temperatures, puts technical overhead on experimental realizations. Here, we investigate a hybrid quantum photonics platform based on silicon-vacancy center in nanodiamonds and metallic bullseye antenna to realize a coherent single-photon interface that operates efficiently down to low numerical aperture optics with an inherent resistance to misalignment. △ Less

Submitted 20 February, 2021; v1 submitted 22 January, 2021; originally announced January 2021.

Improving the dynamic range of single photon counting kinetic inductance detectors

Authors: Nicholas Zobrist, Nikita Klimovich, Byeong Ho Eom, Grégoire Coiffard, Miguel Daal, Noah Swimmer, Sarah Steiger, Bruce Bumble, Henry G. LeDuc, Peter Day, Benjamin A. Mazin

Abstract: We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the c… ▽ More We develop a simple coordinate transformation which can be employed to compensate for the nonlinearity introduced by a Microwave Kinetic Inductance Detector's (MKID) homodyne readout scheme. This coordinate system is compared to the canonically used polar coordinates and is shown to improve the performance of the filtering method often used to estimate a photon's energy. For a detector where the coordinate nonlinearity is primarily responsible for limiting its resolving power, this technique leads to increased dynamic range, which we show by applying the transformation to data from a hafnium MKID designed to be sensitive to photons with wavelengths in the 800 to 1300 nm range. The new coordinates allow the detector to resolve photons with wavelengths down to 400 nm, raising the resolving power at that wavelength from 6.8 to 17. △ Less

Submitted 9 December, 2020; originally announced December 2020.

The MKID Exoplanet Camera for Subaru SCExAO

Authors: Alexander B. Walter, Neelay Fruitwala, Sarah Steiger, John I. Bailey III, Nicholas Zobrist, Noah Swimmer, Isabel Lipartito, Jennifer Pearl Smith, Seth R. Meeker, Clint Bockstiegel, Gregoire Coiffard, Rupert Dodkins, Paul Szypryt, Kristina K. Davis, Miguel Daal, Bruce Bumble, Giulia Collura, Olivier Guyon, Julien Lozi, Sebastien Vievard, Nemanja Jovanovic, Frantz Martinache, Thayne Currie, Benjamin A. Mazin

Abstract: We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument a… ▽ More We present the MKID Exoplanet Camera (MEC), a z through J band (800 - 1400 nm) integral field spectrograph located behind The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) at the Subaru Telescope on Maunakea that utilizes Microwave Kinetic Inductance Detectors (MKIDs) as the enabling technology for high contrast imaging. MEC is the first permanently deployed near-infrared MKID instrument and is designed to operate both as an IFU, and as a focal plane wavefront sensor in a multi-kHz feedback loop with SCExAO. The read noise free, fast time domain information attainable by MKIDs allows for the direct probing of fast speckle fluctuations that currently limit the performance of most high contrast imaging systems on the ground and will help MEC achieve its ultimate goal of reaching contrasts of $10^{-7}$ at 2$λ/ D$. Here we outline the instrument details of MEC including the hardware, firmware, and data reduction and analysis pipeline. We then discuss MEC's current on-sky performance and end with future upgrades and plans. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: To be published in Publications of the Astronomical Society of the Pacific

Quantum computing enhanced computational catalysis

Authors: Vera von Burg, Guang Hao Low, Thomas Häner, Damian S. Steiger, Markus Reiher, Martin Roetteler, Matthias Troyer

Abstract: The quantum computation of electronic energies can break the curse of dimensionality that plagues many-particle quantum mechanics. It is for this reason that a universal quantum computer has the potential to fundamentally change computational chemistry and materials science, areas in which strong electron correlations present severe hurdles for traditional electronic structure methods. Here, we pr… ▽ More The quantum computation of electronic energies can break the curse of dimensionality that plagues many-particle quantum mechanics. It is for this reason that a universal quantum computer has the potential to fundamentally change computational chemistry and materials science, areas in which strong electron correlations present severe hurdles for traditional electronic structure methods. Here, we present a state-of-the-art analysis of accurate energy measurements on a quantum computer for computational catalysis, using improved quantum algorithms with more than an order of magnitude improvement over the best previous algorithms. As a prototypical example of local catalytic chemical reactivity we consider the case of a ruthenium catalyst that can bind, activate, and transform carbon dioxide to the high-value chemical methanol. We aim at accurate resource estimates for the quantum computing steps required for assessing the electronic energy of key intermediates and transition states of its catalytic cycle. In particular, we present new quantum algorithms for double-factorized representations of the four-index integrals that can significantly reduce the computational cost over previous algorithms, and we discuss the challenges of increasing active space sizes to accurately deal with dynamical correlations. We address the requirements for future quantum hardware in order to make a universal quantum computer a successful and reliable tool for quantum computing enhanced computational materials science and chemistry, and identify open questions for further research. △ Less

Submitted 3 March, 2021; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: Main text: 19 pages, 6 figures. Supplement: 82 pages, 8 figures

Journal ref: Phys. Rev. Research 3, 033055 (2021)

Flexible Coaxial Ribbon Cable for High-Density Superconducting Microwave Device Arrays

Authors: Jennifer Pearl Smith, Benjamin A. Mazin, Alex B. Walter, Miguel Daal, J. I. Bailey, III, Clinton Bockstiegel, Nicholas Zobrist, Noah Swimmer, Sarah Steiger, Neelay Fruitwala

Abstract: Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA… ▽ More Superconducting electronics often require high-density microwave interconnects capable of transporting signals between temperature stages with minimal loss, cross talk, and heat conduction. We report the design and fabrication of superconducting 53 wt% Nb-47 wt% Ti (Nb47Ti) FLexible coAXial ribbon cables (FLAX). The ten traces each consist of a 0.076 mm O.D. NbTi inner conductor insulated with PFA (0.28 mm O.D.) and sheathed in a shared 0.025 mm thick Nb47Ti outer conductor. The cable is terminated with G3PO coaxial push-on connectors via stainless steel capillary tubing (1.6 mm O.D., 0.13 mm thick) soldered to a coplanar wave guide transition board. The 30 cm long cable has 1 dB of loss at 8 GHz with -60 dB nearest-neighbor forward cross talk. The loss is 0.5 dB more than commercially available superconducting coax likely due to impedance mismatches caused by manufacturing imperfections in the cable. The reported cross talk is 30 dB lower than previously developed laminated NbTi-onKapton microstrip cables. We estimate the heat load from 1 K to 90 mK to be 20 nW per trace, approximately half the computed load from the smallest commercially available superconducting coax from CryoCoax △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: in IEEE Transactions on Applied Superconductivity

Independent quality assessment of a commercial quantum random number generator

Authors: Mikhail Petrov, Igor Radchenko, Damian Steiger, Renato Renner, Matthias Troyer, Vadim Makarov

Abstract: We reverse-engineer, test and analyse hardware and firmware of the commercial quantum-optical random number generator Quantis from ID Quantique. We show that > 99% of its output data originates in physically random processes: random timing of photon absorption in a semiconductor material, and random growth of avalanche owing to impact ionisation. Under a strong assumption that these processes corr… ▽ More We reverse-engineer, test and analyse hardware and firmware of the commercial quantum-optical random number generator Quantis from ID Quantique. We show that > 99% of its output data originates in physically random processes: random timing of photon absorption in a semiconductor material, and random growth of avalanche owing to impact ionisation. Under a strong assumption that these processes correspond to a measurement of an initially pure state of the components, our analysis implies the unpredictability of the generated randomness. We have also found minor non-random contributions from imperfections in detector electronics and an internal processing algorithm, specific to this particular device. Our work shows that the design quality of a commercial quantum-optical randomness source can be verified without cooperation of the manufacturer and without access to the engineering documentation. △ Less

Submitted 13 July, 2022; v1 submitted 10 April, 2020; originally announced April 2020.

Comments: Title changed. Various minor corrections, including: comments and clarifications about the source of entropy, clarification of the assumptions made, technical correction of bibliographic references. 9 pages, 11 figures, 1 table

Journal ref: EPJ Quantum Technol. 9, 17 (2022)

Characterization of sputtered hafnium thin films for high quality factor microwave kinetic inductance detectors

Authors: G. Coiffard, M. Daal, N. Zobrist, N. Swimmer, S. Steiger, B. Bumble, B. A. Mazin

Abstract: Hafnium is an elemental superconductor which crystallizes in a hexagonal close packed structure, has a transition temperature $T_{C} \simeq 400 mK$, and has a high normal state resistivity around $90 μΩ. cm$. In Microwave Kinetic Inductance Detectors (MKIDs), these properties are advantageous since they allow for creating detectors sensitive to optical and near infra-red radiation. In this work, w… ▽ More Hafnium is an elemental superconductor which crystallizes in a hexagonal close packed structure, has a transition temperature $T_{C} \simeq 400 mK$, and has a high normal state resistivity around $90 μΩ. cm$. In Microwave Kinetic Inductance Detectors (MKIDs), these properties are advantageous since they allow for creating detectors sensitive to optical and near infra-red radiation. In this work, we study how sputter conditions and especially the power applied to the target during the deposition, affect the hafnium $T_{C}$, resistivity, stress, texture and preferred crystal orientation. We find that the position of the target with respect to the substrate strongly affects the orientation of the crystallites in the films and the internal quality factor, $Q_{i}$, of MKIDs fabricated from the films. In particular, we demonstrate that a DC magnetron sputter deposition at a normal angle of incidence, low pressure, and low plasma power promotes the growth of compressive (002)-oriented films and that such films can be used to make high quality factor MKIDs with $Q_{i}$ up to 600,000. △ Less

Submitted 1 April, 2020; originally announced April 2020.

Comments: 9 pages, 8 figures, 1 table. Submitted to SUST

Design and Performance of Hafnium Optical and Near-IR Kinetic Inductance Detectors

Authors: Nicholas Zobrist, Grégoire Coiffard, Bruce Bumble, Noah Swimmer, Sarah Steiger, Miguel Daal, Giulia Collura, Alex B. Walter, Clint Bockstiegel, Neelay Fruitwala, Isabel Lipartito, Benjamin A. Mazin

Abstract: We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality fa… ▽ More We report on the design and performance of Microwave Kinetic Inductance Detectors (MKIDs) sensitive to single photons in the optical to near-infrared range using hafnium as the sensor material. Our test device had a superconducting transition temperature of 395 mK and a room temperature normal state resistivity of 97 $μΩ$ cm with an RRR = 1.6. Resonators on the device displayed internal quality factors of around 200,000. Similar to the analysis of MKIDs made from other highly resistive superconductors, we find that modeling the temperature response of the detector requires an extra broadening parameter in the superconducting density of states. Finally, we show that this material and design is compatible with a full-array fabrication process which resulted in pixels with decay times of about 40 $μ$s and resolving powers of ~9 at 800 nm. △ Less

Submitted 14 November, 2019; originally announced November 2019.

Optical and Near-IR Microwave Kinetic Inductance Detectors (MKIDs) in the 2020s

Authors: Benjamin A. Mazin, Jeb Bailey, Jo Bartlett, Clint Bockstiegel, Bruce Bumble, Gregoire Coiffard, Thayne Currie, Miguel Daal, Kristina Davis, Rupert Dodkins, Neelay Fruitwala, Nemanja Jovanovic, Isabel Lipartito, Julien Lozi, Jared Males, Dimitri Mawet, Seth Meeker, Kieran O'Brien, Michael Rich, Jenny Smith, Sarah Steiger, Noah Swimmer, Alex Walter, Nick Zobrist, Jonas Zmuidzinas

Abstract: Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. Optical and near-IR Microwave Kinetic Inductance Detectors, or MKIDs, are superconducting photon counting detectors capable of measuring the energy and arrival time of individual OIR photons without read noise or dark current. In this whitepaper we will discuss the current status of OIR MKIDs and MKID-based instruments. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Astro2020 APC Whitepaper. 16 pages, 10 figures

Advantages of a modular high-level quantum programming framework

Authors: Damian S. Steiger, Thomas Häner, Matthias Troyer

Abstract: We review some of the features of the ProjectQ software framework and quantify their impact on the resulting circuits. The concise high-level language facilitates implementing even complex algorithms in a very time-efficient manner while, at the same time, providing the compiler with additional information for optimization through code annotation - so-called meta-instructions. We investigate the i… ▽ More We review some of the features of the ProjectQ software framework and quantify their impact on the resulting circuits. The concise high-level language facilitates implementing even complex algorithms in a very time-efficient manner while, at the same time, providing the compiler with additional information for optimization through code annotation - so-called meta-instructions. We investigate the impact of these annotations for the example of Shor's algorithm in terms of logical gate counts. Furthermore, we analyze the effect of different intermediate gate sets for optimization and how the dimensions of the resulting circuit depend on a smart choice thereof. Finally, we demonstrate the benefits of a modular compilation framework by implementing map** procedures for one- and two-dimensional nearest neighbor architectures which we then compare in terms of overhead for different problem sizes. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Journal ref: Microprocessors and Microsystems 66 (2019) 81-89

Narrowband quantum emitters over large spectral range with Fourier-limited linewidth in hexagonal boron nitride

Authors: A. Dietrich, M. Bürk, E. S. Steiger, L. Antoniuk, T. T. Tran, M. Nguyen, I. Aharonovich, F. Jelezko, A. Kubanek

Abstract: Single defect centers in layered hexagonal boron nitride (hBN) are promising candidates as single photon sources for quantum optics and nanophotonics applications. However, until today spectral instability hinders many applications. Here, we perform resonant excitation measurements and observe Fourier-Transform limited (FL) linewidths down to $\approx 50$ MHz. We investigate optical properties of… ▽ More Single defect centers in layered hexagonal boron nitride (hBN) are promising candidates as single photon sources for quantum optics and nanophotonics applications. However, until today spectral instability hinders many applications. Here, we perform resonant excitation measurements and observe Fourier-Transform limited (FL) linewidths down to $\approx 50$ MHz. We investigate optical properties of more than 600 quantum emitters (QE) in hBN. The QEs exhibit narrow zero-phonon lines (ZPL) distributed over a spectral range from 580 nm to 800 nm and with dipole-like emission with high polarization contrast. The emission frequencies can be divided into four main regions indicating distinct families or crystallographic structures of the QEs, in accord with ab-initio calculations. Finally, the emitters withstand transfer to a foreign photonic platform - namely a silver mirror, which makes them compatible with photonic devices such as optical resonators and paves the way to quantum photonics applications including quantum commmunications and quantum repeaters. △ Less

Submitted 19 December, 2017; originally announced December 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 98, 081414 (2018)

Quantum Algorithm for Spectral Measurement with Lower Gate Count

Authors: David Poulin, Alexei Kitaev, Damian S. Steiger, Matthew B. Hastings, Matthias Troyer

Abstract: We present two techniques that can greatly reduce the number of gates required to realize an energy measurement, with application to ground state preparation in quantum simulations. The first technique realizes that to prepare the ground state of some Hamiltonian, it is not necessary to implement the time-evolution operator: any unitary operator which is a function of the Hamiltonian will do. We p… ▽ More We present two techniques that can greatly reduce the number of gates required to realize an energy measurement, with application to ground state preparation in quantum simulations. The first technique realizes that to prepare the ground state of some Hamiltonian, it is not necessary to implement the time-evolution operator: any unitary operator which is a function of the Hamiltonian will do. We propose one such unitary operator which can be implemented exactly, circumventing any Taylor or Trotter approximation errors. The second technique is tailored to lattice models, and is targeted at reducing the use of generic single-qubit rotations, which are very expensive to produce by standard fault tolerant techniques. In particular, the number of generic single-qubit rotations used by our method scales with the number of parameters in the Hamiltonian, which contrasts with a growth proportional to the lattice size required by other techniques. △ Less

Submitted 26 August, 2018; v1 submitted 29 November, 2017; originally announced November 2017.

Comments: Fixed a few minor things in the "Spectrum by Quantum Walk" section

Journal ref: Phys. Rev. Lett. 121, 010501 (2018)

OpenFermion: The Electronic Structure Package for Quantum Computers

Authors: Jarrod R. McClean, Kevin J. Sung, Ian D. Kivlichan, Yudong Cao, Chengyu Dai, E. Schuyler Fried, Craig Gidney, Brendan Gimby, Pranav Gokhale, Thomas Häner, Tarini Hardikar, Vojtěch Havlíček, Oscar Higgott, Cup** Huang, Josh Izaac, Zhang Jiang, Xinle Liu, Sam McArdle, Matthew Neeley, Thomas O'Brien, Bryan O'Gorman, Isil Ozfidan, Maxwell D. Radin, Jhonathan Romero, Nicholas Rubin , et al. (10 additional authors not shown)

Abstract: Quantum simulation of chemistry and materials is predicted to be an important application for both near-term and fault-tolerant quantum devices. However, at present, develo** and studying algorithms for these problems can be difficult due to the prohibitive amount of domain knowledge required in both the area of chemistry and quantum algorithms. To help bridge this gap and open the field to more… ▽ More Quantum simulation of chemistry and materials is predicted to be an important application for both near-term and fault-tolerant quantum devices. However, at present, develo** and studying algorithms for these problems can be difficult due to the prohibitive amount of domain knowledge required in both the area of chemistry and quantum algorithms. To help bridge this gap and open the field to more researchers, we have developed the OpenFermion software package (www.openfermion.org). OpenFermion is an open-source software library written largely in Python under an Apache 2.0 license, aimed at enabling the simulation of fermionic models and quantum chemistry problems on quantum hardware. Beginning with an interface to common electronic structure packages, it simplifies the translation between a molecular specification and a quantum circuit for solving or studying the electronic structure problem on a quantum computer, minimizing the amount of domain expertise required to enter the field. The package is designed to be extensible and robust, maintaining high software standards in documentation and testing. This release paper outlines the key motivations behind design choices in OpenFermion and discusses some basic OpenFermion functionality which we believe will aid the community in the development of better quantum algorithms and tools for this exciting area of research. △ Less

Submitted 27 February, 2019; v1 submitted 20 October, 2017; originally announced October 2017.

Comments: 22 pages

Entanglement spectroscopy on a quantum computer

Authors: Sonika Johri, Damian S. Steiger, Matthias Troyer

Abstract: We present a quantum algorithm to compute the entanglement spectrum of arbitrary quantum states. The interesting universal part of the entanglement spectrum is typically contained in the largest eigenvalues of the density matrix which can be obtained from the lower Renyi entropies through the Newton-Girard method. Obtaining the $p$ largest eigenvalues ($λ_1>λ_2\ldots>λ_p$) requires a parallel circ… ▽ More We present a quantum algorithm to compute the entanglement spectrum of arbitrary quantum states. The interesting universal part of the entanglement spectrum is typically contained in the largest eigenvalues of the density matrix which can be obtained from the lower Renyi entropies through the Newton-Girard method. Obtaining the $p$ largest eigenvalues ($λ_1>λ_2\ldots>λ_p$) requires a parallel circuit depth of $\mathcal{O}(p(λ_1/λ_p)^p)$ and $\mathcal{O}(p\log(N))$ qubits where up to $p$ copies of the quantum state defined on a Hilbert space of size $N$ are needed as the input. We validate this procedure for the entanglement spectrum of the topologically-ordered Laughlin wave function corresponding to the quantum Hall state at filling factor $ν=1/3$. Our scaling analysis exposes the tradeoffs between time and number of qubits for obtaining the entanglement spectrum in the thermodynamic limit using finite-size digital quantum computers. We also illustrate the utility of the second Renyi entropy in predicting a topological phase transition and in extracting the localization length in a many-body localized system. △ Less

Submitted 20 October, 2017; v1 submitted 24 July, 2017; originally announced July 2017.

Journal ref: Phys. Rev. B 96, 195136 (2017)

0.5 Petabyte Simulation of a 45-Qubit Quantum Circuit

Authors: Thomas Häner, Damian S. Steiger

Abstract: Near-term quantum computers will soon reach sizes that are challenging to directly simulate, even when employing the most powerful supercomputers. Yet, the ability to simulate these early devices using classical computers is crucial for calibration, validation, and benchmarking. In order to make use of the full potential of systems featuring multi- and many-core processors, we use automatic code g… ▽ More Near-term quantum computers will soon reach sizes that are challenging to directly simulate, even when employing the most powerful supercomputers. Yet, the ability to simulate these early devices using classical computers is crucial for calibration, validation, and benchmarking. In order to make use of the full potential of systems featuring multi- and many-core processors, we use automatic code generation and optimization of compute kernels, which also enables performance portability. We apply a scheduling algorithm to quantum supremacy circuits in order to reduce the required communication and simulate a 45-qubit circuit on the Cori II supercomputer using 8,192 nodes and 0.5 petabytes of memory. To our knowledge, this constitutes the largest quantum circuit simulation to this date. Our highly-tuned kernels in combination with the reduced communication requirements allow an improvement in time-to-solution over state-of-the-art simulations by more than an order of magnitude at every scale. △ Less

Submitted 18 September, 2017; v1 submitted 4 April, 2017; originally announced April 2017.

Journal ref: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis. SC 2017. Article No. 33

ProjectQ: An Open Source Software Framework for Quantum Computing

Authors: Damian S. Steiger, Thomas Häner, Matthias Troyer

Abstract: We introduce ProjectQ, an open source software effort for quantum computing. The first release features a compiler framework capable of targeting various types of hardware, a high-performance simulator with emulation capabilities, and compiler plug-ins for circuit drawing and resource estimation. We introduce our Python-embedded domain-specific language, present the features, and provide example i… ▽ More We introduce ProjectQ, an open source software effort for quantum computing. The first release features a compiler framework capable of targeting various types of hardware, a high-performance simulator with emulation capabilities, and compiler plug-ins for circuit drawing and resource estimation. We introduce our Python-embedded domain-specific language, present the features, and provide example implementations for quantum algorithms. The framework allows testing of quantum algorithms through simulation and enables running them on actual quantum hardware using a back-end connecting to the IBM Quantum Experience cloud service. Through extension mechanisms, users can provide back-ends to further quantum hardware, and scientists working on quantum compilation can provide plug-ins for additional compilation, optimization, gate synthesis, and layout strategies. △ Less

Submitted 29 January, 2018; v1 submitted 23 December, 2016; originally announced December 2016.

Comments: Version accepted by Quantum

Journal ref: Quantum 2, 49 (2018)

High Performance Emulation of Quantum Circuits

Authors: Thomas Häner, Damian S. Steiger, Mikhail Smelyanskiy, Matthias Troyer

Abstract: As quantum computers of non-trivial size become available in the near future, it is imperative to develop tools to emulate small quantum computers. This allows for validation and debugging of algorithms as well as exploring hardware-software co-design to guide the development of quantum hardware and architectures. The simulation of quantum computers entails multiplications of sparse matrices with… ▽ More As quantum computers of non-trivial size become available in the near future, it is imperative to develop tools to emulate small quantum computers. This allows for validation and debugging of algorithms as well as exploring hardware-software co-design to guide the development of quantum hardware and architectures. The simulation of quantum computers entails multiplications of sparse matrices with very large dense vectors of dimension $2^n$, where $n$ denotes the number of qubits, making this a memory-bound and network bandwidth-limited application. We introduce the concept of a quantum computer \textit{emulator} as a component of a software framework for quantum computing, enabling a significant performance advantage over simulators by emulating quantum algorithms at a high level rather than simulating individual gate operations. We describe various optimization approaches and present benchmarking results, establishing the superiority of quantum computer emulators in terms of performance. △ Less

Submitted 21 April, 2016; originally announced April 2016.

Journal ref: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis. SC 2016. Article No. 74

A Software Methodology for Compiling Quantum Programs

Authors: Thomas Häner, Damian S. Steiger, Krysta Svore, Matthias Troyer

Abstract: Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of a… ▽ More Quantum computers promise to transform our notions of computation by offering a completely new paradigm. To achieve scalable quantum computation, optimizing compilers and a corresponding software design flow will be essential. We present a software architecture for compiling quantum programs from a high-level language program to hardware-specific instructions. We describe the necessary layers of abstraction and their differences and similarities to classical layers of a computer-aided design flow. For each layer of the stack, we discuss the underlying methods for compilation and optimization. Our software methodology facilitates more rapid innovation among quantum algorithm designers, quantum hardware engineers, and experimentalists. It enables scalable compilation of complex quantum algorithms and can be targeted to any specific quantum hardware implementation. △ Less

Submitted 11 May, 2016; v1 submitted 5 April, 2016; originally announced April 2016.

ACM Class: D.2.2; D.2.6

Journal ref: Quantum Sci. Technol. 3 (2018) 020501

Heavy tails in the distribution of time-to-solution for classical and quantum annealing

Authors: Damian S. Steiger, Troels F. Rønnow, Matthias Troyer

Abstract: For many optimization algorithms the time-to-solution depends not only on the problem size but also on the specific problem instance and may vary by many orders of magnitude. It is then necessary to investigate the full distribution and especially its tail. Here we analyze the distributions of annealing times for simulated annealing and simulated quantum annealing (by path integral quantum Monte C… ▽ More For many optimization algorithms the time-to-solution depends not only on the problem size but also on the specific problem instance and may vary by many orders of magnitude. It is then necessary to investigate the full distribution and especially its tail. Here we analyze the distributions of annealing times for simulated annealing and simulated quantum annealing (by path integral quantum Monte Carlo) for random Ising spin glass instances. We find power-law distributions with very heavy tails, corresponding to extremely hard instances, but far broader distributions - and thus worse performance for hard instances - for simulated quantum annealing than for simulated annealing. Fast, non-adiabatic, annealing schedules can improve the performance of simulated quantum annealing for very hard instances by many orders of magnitude. △ Less

Submitted 29 April, 2015; originally announced April 2015.

Journal ref: Phys. Rev. Lett. 115, 230501 (2015)

Atomistic and continuum modeling of a zincblende quantum dot heterostructure

Authors: Parijat Sengupta, Sunhee Lee, Sebastian Steiger, Hoon Ryu, Gerhard Klimeck

Abstract: A multiscale approach was adopted for the calculation of confined states in self-assembled semiconductor quantum dots (QDs). While results close to experimental data have been obtained with a combination of atomistic strain and tight-binding (TB) electronic structure description for the confined quantum states in the QD, the TB calculation requires substantial computational resources. To alleviate… ▽ More A multiscale approach was adopted for the calculation of confined states in self-assembled semiconductor quantum dots (QDs). While results close to experimental data have been obtained with a combination of atomistic strain and tight-binding (TB) electronic structure description for the confined quantum states in the QD, the TB calculation requires substantial computational resources. To alleviate this problem an integrated approach was adopted to compute the energy states from a continuum 8-band k.p Hamiltonian under the influence of an atomistic strain field. Such multi-scale simulations yield a roughly six-fold faster simulation. Atomic-resolution strain is added to the k.p Hamiltonian through interpolation onto a coarser continuum grid. Sufficient numerical accuracy is obtained by the multi-scale approach. Optical transition wavelengths are within 7% of the corresponding TB results with a proper splitting of p-type sub-bands. The systematically lower emission wavelengths in k.p are attributable to an underestimation of the coupling between the conduction and valence bands. △ Less

Submitted 15 September, 2014; v1 submitted 21 July, 2014; originally announced July 2014.

Comments: 4 pages,4 figures