-
CRIRES$^{+}$ on sky at the ESO Very Large Telescope
Authors:
R. J. Dorn,
P. Bristow,
J. V. Smoker,
F. Rodler,
A. Lavail,
M. Accardo,
M. van den Ancker,
D. Baade,
A. Baruffolo,
B. Courtney-Barrer,
L. Blanco,
A. Brucalassi,
C. Cumani,
R. Follert,
A. Haimerl,
A. Hatzes,
M. Haug,
U. Heiter,
R. Hinterschuster,
N. Hubin,
D. J. Ives,
Y. Jung,
M. Jones,
J-P. Kirchbauer,
B. Klein
, et al. (27 additional authors not shown)
Abstract:
The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES$^{+}$ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 $μ$m cutoff wavelength replaced t…
▽ More
The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES$^{+}$ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 $μ$m cutoff wavelength replaced the existing detectors. Amongst many other improvements, a new spectropolarimetric unit was added and the calibration system has been enhanced. The instrument was installed at the VLT on Unit Telescope 3 at the beginning of 2020 and successfully commissioned and verified for science operations during 2021, partly remotely from Europe due to the COVID-19 pandemic. The instrument was subsequently offered to the community from October 2021 onwards. This article describes the performance and capabilities of the upgraded instrument and presents on sky results.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
HiPERCAM: a quintuple-beam, high-speed optical imager on the 10.4-m Gran Telescopio Canarias
Authors:
V. S. Dhillon,
N. Bezawada,
M. Black,
S. D. Dixon,
T. Gamble,
X. Gao,
D. M. Henry,
P. Kerry,
S. P. Littlefair,
D. W. Lunney,
T. R. Marsh,
C. Miller,
S. G. Parsons,
R. P. Ashley,
E. Breedt,
A. Brown,
M. J. Dyer,
M. J. Green,
I. Pelisoli,
D. I. Sahman,
J. Wild,
D. J. Ives,
L. Mehrgan,
J. Stegmeier,
C. M. Dubbeldam
, et al. (14 additional authors not shown)
Abstract:
HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled ther…
▽ More
HiPERCAM is a portable, quintuple-beam optical imager that saw first light on the 10.4-m Gran Telescopio Canarias (GTC) in 2018. The instrument uses re-imaging optics and 4 dichroic beamsplitters to record $u_s g_s r_s i_s z_s$ ($320-1060$ nm) images simultaneously on its five CCD cameras, each of 3.1 arcmin (diagonal) field of view. The detectors in HiPERCAM are frame-transfer devices cooled thermo-electrically to 183 K, thereby allowing both long-exposure, deep imaging of faint targets, as well as high-speed (over 1000 windowed frames per second) imaging of rapidly varying targets. A comparison-star pick-off system in the telescope focal plane increases the effective field of view to 6.7 arcmin for differential photometry. Combining HiPERCAM with the world's largest optical telescope enables the detection of astronomical sources to $g_s \sim 23$ in 1 s and $g_s \sim 28$ in 1 h. In this paper we describe the scientific motivation behind HiPERCAM, present its design, report on its measured performance, and outline some planned enhancements.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Detector Systems Engineering for Extremely Large Instruments
Authors:
Elizabeth M. George,
Naidu Bezawada,
Derek Ives,
Leander Mehrgan,
Matteo Accardo,
Domingo Alvarez,
Martin Brinkmann,
Ralf Conzelmann,
Claudio Cumani,
Mark Downing,
Max Engelhardt,
Marcus Haug,
Joshua Hopgood,
Christoph Geimer,
Olaf Iwert,
Barbara Klein,
Christopher Mandla,
Eric Müller,
Suzanne Ramsay,
Javier Reyes,
Mathias Richerzhagen,
Benoît Serra,
Matthias Seidel,
Jörg Stegmeier,
Mirko Todorovic
Abstract:
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and…
▽ More
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and producing state-of-the-art detector control and readout electronics, to develo** new detector characterization techniques in the lab, to performance modeling and final system verification. We report briefly on the current design of these detector systems and developments underway to meet the challenging scientific performance goals of the ELT instruments.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
Authors:
A. Matter,
B. Lopez,
P. Antonelli,
M. Lehmitz,
F. Bettonvil,
U. Beckmann,
S. Lagarde,
W. Jaffe,
R. G. Petrov,
P. Berio,
F. Millour,
S. Robbe-Dubois,
A. Glindemann,
P. Bristow,
M. Schoeller,
T. Lanz,
T. Henning,
G. Weigelt,
M. Heininger,
S. Morel,
P. Cruzalebes,
K. Meisenheimer,
R. Hofferbert,
S. Wolf,
Y. Bresson
, et al. (82 additional authors not shown)
Abstract:
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena a…
▽ More
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
