-
Triangulating tunneling resonances in a point contact
Authors:
Nathaniel C. Bishop,
Ralph W. Young,
Gregory A. Ten Eyck,
Joel R. Wend,
Edward S. Bielejec,
Kevin Eng,
Lisa A. Tracy,
Michael P. Lilly,
Malcolm S. Carroll,
Carlos Borrás Pinilla,
Harold L. Stalford
Abstract:
We observe resonant tunneling in silicon split gate point contacts implanted with antimony and defined in a self-aligned poly-silicon double gate enhancement mode Si-MOS device structure. We identify which resonances are likely candidates for transport through the antimony donor as opposed to unintentional disorder induced potentials using capacitance triangulation. We determine the capacitances f…
▽ More
We observe resonant tunneling in silicon split gate point contacts implanted with antimony and defined in a self-aligned poly-silicon double gate enhancement mode Si-MOS device structure. We identify which resonances are likely candidates for transport through the antimony donor as opposed to unintentional disorder induced potentials using capacitance triangulation. We determine the capacitances from the resonant feature to each of the conducting gates and the source/drain two dimensional electron gas regions. In our device geometry, these capacitances provide information about the resonance location in three dimensions. Semi-classical electrostatic simulations of capacitance, already used to map quantum dot size and position, identify a combination of location and confinement potential size that satisfy our experimental observations. The sensitivity of simulation to position and size allow us to triangulate possible locations of the resonant level with nanometer resolution. We discuss our results and how they may apply to resonant tunneling through a single donor.
△ Less
Submitted 25 July, 2011;
originally announced July 2011.
-
Implications of Electronics Constraints for Solid-State Quantum Error Correction and Quantum Circuit Failure Probability
Authors:
James E. Levy,
Malcolm S. Carroll,
Anand Ganti,
Cynthia A. Phillips,
Andrew J. Landahl,
Thomas M. Gurrieri,
Robert D. Carr,
Harold L. Stalford,
Erik Nielsen
Abstract:
In this paper we present the impact of classical electronics constraints on a solid-state quantum dot logical qubit architecture. Constraints due to routing density, bandwidth allocation, signal timing, and thermally aware placement of classical supporting electronics significantly affect the quantum error correction circuit's error rate. We analyze one level of a quantum error correction circuit…
▽ More
In this paper we present the impact of classical electronics constraints on a solid-state quantum dot logical qubit architecture. Constraints due to routing density, bandwidth allocation, signal timing, and thermally aware placement of classical supporting electronics significantly affect the quantum error correction circuit's error rate. We analyze one level of a quantum error correction circuit using nine data qubits in a Bacon-Shor code configured as a quantum memory. A hypothetical silicon double quantum dot quantum bit (qubit) is used as the fundamental element. A pessimistic estimate of the error probability of the quantum circuit is calculated using the total number of gates and idle time using a provably optimal schedule for the circuit operations obtained with an integer program methodology. The micro-architecture analysis provides insight about the different ways the electronics impact the circuit performance (e.g., extra idle time in the schedule), which can significantly limit the ultimate performance of any quantum circuit and therefore is a critical foundation for any future larger scale architecture analysis.
△ Less
Submitted 3 May, 2011;
originally announced May 2011.
-
Double quantum dot with tunable coupling in an enhancement-mode silicon metal-oxide semiconductor device with lateral geometry
Authors:
L. A. Tracy,
E. P. Nordberg,
R. W. Young,
C. Borras Pinilla,
H. L. Stalford,
G. A. Ten Eyck,
K. Eng,
K. D. Childs,
J. Stevens,
M. P. Lilly,
M. A. Eriksson,
M. S. Carroll
Abstract:
We present transport measurements of a tunable silicon metal-oxide-semiconductor double quantum dot device with lateral geometry. Experimentally extracted gate-to-dot capacitances show that the device is largely symmetric under the gate voltages applied. Intriguingly, these gate voltages themselves are not symmetric. Comparison with numerical simulations indicates that the applied gate voltages se…
▽ More
We present transport measurements of a tunable silicon metal-oxide-semiconductor double quantum dot device with lateral geometry. Experimentally extracted gate-to-dot capacitances show that the device is largely symmetric under the gate voltages applied. Intriguingly, these gate voltages themselves are not symmetric. Comparison with numerical simulations indicates that the applied gate voltages serve to offset an intrinsic asymmetry in the physical device. We also show a transition from a large single dot to two well isolated coupled dots, where the central gate of the device is used to controllably tune the interdot coupling.
△ Less
Submitted 29 October, 2010;
originally announced November 2010.
-
Capacitance modeling of complex topographical silicon quantum dot structures
Authors:
H. L. Stalford,
R. Young,
E. P. Nordberg,
James. E. Levy,
Carlos Borras Pinilla,
M. S. Carroll
Abstract:
Quantum dot (QD) lay-outs are becoming more complex as the technology is being applied to more complex multi-QD structures. This increase in complexity requires improved capacitance modeling both for design and accurate interpretation of QD properties from measurement. A combination of process simulation, electrostatic simulation, and computer assisted design (CAD) lay-out packages are used to d…
▽ More
Quantum dot (QD) lay-outs are becoming more complex as the technology is being applied to more complex multi-QD structures. This increase in complexity requires improved capacitance modeling both for design and accurate interpretation of QD properties from measurement. A combination of process simulation, electrostatic simulation, and computer assisted design (CAD) lay-out packages are used to develop a three dimensional (3D) classical capacitance model. The agreement of the capacitances of the classical model is tested against two different, experimentally measured, topographically complex silicon QD geometries. Agreement with experiment, within 10-20%, is demonstrated for the two structures when the details of the structure are transferred from the CAD to the model capturing the full 3D topography. Small uncertainty in device dimensions due to uncontrolled variation in processing, like layer thickness and gate size, are calculated to be sufficient to explain the disagreement. The sensitivity of the capacitances to small variations in the structure also highlights the limits of accuracy of capacitance models for QD analysis. We furthermore observe that a critical density, the metal insulator transition, can be used as a good approximation of the metallic edge of the quantum dot when electron density in the dot is calculated directly with a semi-classical simulation.
△ Less
Submitted 18 November, 2009;
originally announced November 2009.
-
Charge sensing in enhancement mode double-top-gated metal-oxide-semiconductor quantum dots
Authors:
E. P. Nordberg,
H. L. Stalford,
R. Young,
G. A. Ten Eyck,
K. Eng,
L. A. Tracy,
K. D. Childs,
J. R. Wendt,
R. K. Grubbs,
J. Stevens,
M. P. Lilly,
M. A. Eriksson,
M. S. Carroll
Abstract:
Laterally coupled charge sensing of quantum dots is highly desirable, because it enables measurement even when conduction through the quantum dot itself is suppressed. In this work, we demonstrate such charge sensing in a double top gated MOS system. The current through a point contact constriction integrated near a quantum dot shows sharp 2% changes corresponding to charge transitions between t…
▽ More
Laterally coupled charge sensing of quantum dots is highly desirable, because it enables measurement even when conduction through the quantum dot itself is suppressed. In this work, we demonstrate such charge sensing in a double top gated MOS system. The current through a point contact constriction integrated near a quantum dot shows sharp 2% changes corresponding to charge transitions between the dot and a nearby lead. We extract the coupling capacitance between the charge sensor and the quantum dot, and we show that it agrees well with a 3D capacitance model of the integrated sensor and quantum dot system.
△ Less
Submitted 18 September, 2009;
originally announced September 2009.
-
Enhancement mode double top gated MOS nanostructures with tunable lateral geometry
Authors:
E. P. Nordberg,
G. A. Ten Eyck,
H. L. Stalford,
R. P. Muller,
R. W. Young,
K. Eng,
L. A. Tracy,
K. D. Childs,
J. R. Wendt,
R. K. Grubbs,
J. Stevens,
M. P. Lilly,
M. A. Eriksson,
M. S. Carroll
Abstract:
We present measurements of silicon (Si) metal-oxide-semiconductor (MOS) nanostructures that are fabricated using a process that facilitates essentially arbitrary gate geometries. Stable Coulomb blockade behavior free from the effects of parasitic dot formation is exhibited in several MOS quantum dots with an open lateral quantum dot geometry. Decreases in mobility and increases in charge defect…
▽ More
We present measurements of silicon (Si) metal-oxide-semiconductor (MOS) nanostructures that are fabricated using a process that facilitates essentially arbitrary gate geometries. Stable Coulomb blockade behavior free from the effects of parasitic dot formation is exhibited in several MOS quantum dots with an open lateral quantum dot geometry. Decreases in mobility and increases in charge defect densities (i.e. interface traps and fixed oxide charge) are measured for critical process steps, and we correlate low disorder behavior with a quantitative defect density. This work provides quantitative guidance that has not been previously established about defect densities for which Si quantum dots do not exhibit parasitic dot formation. These devices make use of a double-layer gate stack in which many regions, including the critical gate oxide, were fabricated in a fully-qualified CMOS facility.
△ Less
Submitted 11 September, 2009; v1 submitted 19 June, 2009;
originally announced June 2009.
