-
Synthesis of hard magnetic α-MnBi phase by high pressure torsion and field assisted annealing
Authors:
Lukas Weissitsch,
Stefan Wurster,
Martin Stueckler,
Timo Mueller,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Bulk composites using powder blends of Mn and Bi with equal atomic ratios are consolidated and severely deformed by high-pressure torsion (HPT). Subsequent annealing treatments lead to the formation of the ferromagnetic and rare-earth free hard magnetic α-MnBi phase. The initial phase formation is studied by in-situ high-energy XRD annealing experiments showing a beneficial influence of HPT-deform…
▽ More
Bulk composites using powder blends of Mn and Bi with equal atomic ratios are consolidated and severely deformed by high-pressure torsion (HPT). Subsequent annealing treatments lead to the formation of the ferromagnetic and rare-earth free hard magnetic α-MnBi phase. The initial phase formation is studied by in-situ high-energy XRD annealing experiments showing a beneficial influence of HPT-deformation on the amount of α-MnBi. The nucleation sites are strongly increased, thus the volumetric α-MnBi phase content exceeds 50 vol.%. A lower HPT-pressure of 2 GPa is found to be preferred over 5 GPa to obtain high α-MnBi contents. Annealing is done with or without applying an external magnetic field. Additionally, influences of the HPT-induced shear deformation are discussed and correlated with preferred diffusion path ways fostering the formation of anisotropic α-MnBi phase.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Magnetoresistive behaviour of ternary Cu-based materials processed by high-pressure torsion
Authors:
M. Kasalo,
S. Wurster,
M. Stückler,
M. Zawodzki,
L. Weissitsch,
R. Pippan,
A. Bachmaier
Abstract:
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular giant magnetoresistance effect, requiring interfaces between ferro- and nonmagnetic materials. This magnetic effect was found for both ternary systems; adequate sub…
▽ More
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular giant magnetoresistance effect, requiring interfaces between ferro- and nonmagnetic materials. This magnetic effect was found for both ternary systems; adequate subsequent annealing had a positive influence. The as-deformed states, as well as microstructural changes upon thermal treatments, were studied using scanning electron microscopy and X-ray diffraction measurements. Deducing from electron microscopy, a single-phase structure was observed for all as-deformed samples, indicating the formation of a supersaturated solid solution. However, judging from the presence of the granular giant-magnetoresistive effect, small ferromagnetic particles have to be present. The highest drop in room temperature resistivity (2.45% at 1790 kA/m) was found in Cu62Fe19Ni19 after annealing for 1 h at 400 °C. Combining the results of classical microstructural studies and magnetic measurements, insights into the evolution of ferromagnetic particles are accessible.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Manufacturing of Textured Bulk Fe-SmCo$_{5}$ Magnets by Severe Plastic Deformation
Authors:
Lukas Weissitsch,
Martin Stückler,
Stefan Wurster,
Juraj Todt,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Exchange-coupling between soft- and hard-magnetic phases plays an important role in the engineering of novel magnetic materials. To achieve exchange coupling, a two-phase microstructure is necessary. This interface effect is further enhanced if both phase dimensions are reduced to the nanometer scale. At the same time, it is challenging to obtain large sample dimensions. In this study, powder blen…
▽ More
Exchange-coupling between soft- and hard-magnetic phases plays an important role in the engineering of novel magnetic materials. To achieve exchange coupling, a two-phase microstructure is necessary. This interface effect is further enhanced if both phase dimensions are reduced to the nanometer scale. At the same time, it is challenging to obtain large sample dimensions. In this study, powder blends and ball-milled powder blends of Fe-SmCo$_{5}$ are consolidated and are deformed by high-pressure torsion (HPT), as this technique allows us to produce bulk magnetic materials of reasonable sizes. Additionally, the effect of severe deformation by ball-milling and severe plastic deformation by HPT on exchange coupling in Fe-SmCo$_{5}$ composites is investigated. Due to the applied shear deformation, it is possible to obtain a texture in both phases, resulting in an anisotropic magnetic behavior and an improved magnetic performance.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Oxide-stabilized microstructure of severe plastically deformed CuCo alloys
Authors:
Martin Stueckler,
Jakub Zalesak,
Timo Mueller,
Stefan Wurster,
Lukas Weissitsch,
Martin Meier,
Peter Felfer,
Christoph Gammer,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by pinning grain boundaries through impurities or oxides. CuCo alloys, severe plastically deformed using high-pressure torsion, were used to investigate the evolution…
▽ More
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by pinning grain boundaries through impurities or oxides. CuCo alloys, severe plastically deformed using high-pressure torsion, were used to investigate the evolution of oxides upon annealing. These investigations were performed using electron microscopy, synchrotron high-energy X-ray scattering and atom probe tomography. Monitoring the evolution of oxides by in-situ small angle scattering investigations indicates the growth of primary oxides as well as the formation of another species of oxide at elevated temperatures. Slightly different coarsening can be observed in heat-treated samples, which can be traced back to the influence of different oxide amounts. The initially supersaturated CuCo matrix changes by the decomposition process as well as Co- and Cu-based oxides formation and growth. It has been found that the major number of oxides which are present after annealing, can already be found in the starting materials.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires
Authors:
Stefan Wurster,
Martin Stückler,
Lukas Weissitsch,
Heinz Krenn,
Anton Hohenwarter,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The paper describes the capability of magnetic softening of a coarse grained bulk material by a severe deformation technique. Connecting the microstructure with magnetic properties, the coercive field decreases dramatically for grains smaller than the magnetic exchange length. This makes the investigation of soft magnetic properties of severely drawn pearlitic wires very interesting. With the help…
▽ More
The paper describes the capability of magnetic softening of a coarse grained bulk material by a severe deformation technique. Connecting the microstructure with magnetic properties, the coercive field decreases dramatically for grains smaller than the magnetic exchange length. This makes the investigation of soft magnetic properties of severely drawn pearlitic wires very interesting. With the help of the starting two phase microstructure, it is possible to substantially refine the material, which allows the investigation of magnetic properties for nanocrystalline bulk material. Compared to the coarse grained initial, pearlitic state, the coercivities of the highly deformed wires decrease while the saturation magnetization values increase, even beyond the value expectable from the individual constituents. The lowest coercivity in the drawn state is found to be 520 A m for a wire of 24 um thickness and an annealing treatment has a further positive effect on it. The decreasing coercivity is discussed in the framework of two opposing models: grain refinement on the one hand and dissolution of cementite on the other hand. Auxiliary measurements give a clear indication for the latter model, delivering a sufficient description of the observed evolution of magnetic properties.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Nanocrystalline FeCr alloys synthesised by severe plastic deformation -- a potential material for exchange bias and enhanced magnetostriction
Authors:
Lukas Weissitsch,
Stefan Wurster,
Alexander Paulischin,
Martin Stückler,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc melting and subsequent severe plastic deformation by high pressure torsion. The physical similarities between elemental Fe and Cr in combination with the nanocr…
▽ More
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc melting and subsequent severe plastic deformation by high pressure torsion. The physical similarities between elemental Fe and Cr in combination with the nanocrystalline structure of the as-deformed alloys, necessitates advanced characterisation techniques for the as-deformed state: In-situ annealing synchrotron X-ray diffraction measurements as well as electron microscopy experiments are linked to magnetostrictive measurements and reveal a single phase microstructure. Surprisingly, the nanocrystalline FeCr alloys remain supersaturated solid solutions upon annealing above 500°C, meaning a decomposition in a FeCr nanocomposite is suppressed. For the chosen annealing conditions grain growth is faster than decomposition and enhanced magnetostrictive values are found compared to materials in the as-deformed state.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Sampling the Cu-Fe-Co phase diagram by severe plastic deformation for enhanced soft magnetic properties
Authors:
Martin Stückler,
Stefan Wurster,
Lukas Weissitsch,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic materials and therefore at the formation of a homogeneous and nanocrystalline microstructure. For intermediate ferromagnetic contents, high-pressure torsion at…
▽ More
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic materials and therefore at the formation of a homogeneous and nanocrystalline microstructure. For intermediate ferromagnetic contents, high-pressure torsion at room temperature yields single-phase supersaturated solid solutions. For higher ferromagnetic contents, two consecutive steps of high-pressure torsion deformation at different temperatures yield the desired nanocrystalline microstructure. Depending on the Co-to-Fe-ratio, either a single-phase supersaturated solid solution or a nanocomposite forms. The composite exhibits an enhanced magnetic moment, indicating the formation of a (Fe,Co)-alloy upon severe plastic deformation. Soft magnetic properties are verified for large Co-to-Fe-ratios and this microstructure is found to remain stable up to 400 °C.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion
Authors:
Martin Stückler,
Christian Teichert,
Aleksandar Matković,
Heinz Krenn,
Lukas Weissitsch,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable micr…
▽ More
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu alloys, which are prepared from an initial powder mixture with Co-contents above 70 wt.%. Isochronal annealing treatments up to 400°C further reveal a remarkable microstructural stability. Only at 600°C, the supersaturated phase decomposes into two fcc-phases. The coercivity, measured by SQUID as a function of annealing temperature, remains significantly below the value for bulk-Co in all states investigated. In order to understand the measured magnetic properties in detail, a quantitative analysis of the magnetic microstructure is carried out by magnetic force microscopy and correlated to the observed changes in coercivity. Our results show that the rising coercivity can be explained by a magnetic hardening effect occurring in context with spinodal decomposition.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
In situ AC-hysteresis measurements of SPD-processed Cu20(Fe15Co85)80
Authors:
Martin Stückler,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The changes of magnetic properties upon heat treatment of a metastable supersaturated solid solution processed by severe plastic deformation are investigated by in-situ AC-hysteresis measurements. Data are analyzed in the framework of dynamic loss theory, with correlative investigations of the microstructural properties. The evolution of hysteresis upon annealing points out that the single-phase s…
▽ More
The changes of magnetic properties upon heat treatment of a metastable supersaturated solid solution processed by severe plastic deformation are investigated by in-situ AC-hysteresis measurements. Data are analyzed in the framework of dynamic loss theory, with correlative investigations of the microstructural properties. The evolution of hysteresis upon annealing points out that the single-phase supersaturated solid solution remains stable up to 400°C, then hindering of domain wall motion sets in at this temperature. At 600°C, a multi phase microstructure is present, causing a significant increase in coercivity.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Processing of nanostructured bulk Fe-Cr alloys by severe plastic deformation
Authors:
Lukas Weissitsch,
Martin Stückler,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The processing of binary alloys consisting of ferromagnetic Fe and antiferromagnetic Cr by severe plastic deformation (SPD) with different chemical compositions has been investigated. Although the phase diagram exhibits a large gap in the thermodynamical equilibrium at lower temperatures, it is shown that techniques based on SPD help to overcome common processing limits. Different processing route…
▽ More
The processing of binary alloys consisting of ferromagnetic Fe and antiferromagnetic Cr by severe plastic deformation (SPD) with different chemical compositions has been investigated. Although the phase diagram exhibits a large gap in the thermodynamical equilibrium at lower temperatures, it is shown that techniques based on SPD help to overcome common processing limits. Different processing routes including initial ball milling (BM) and arc melting (AM) and a concatenation with annealing treatments prior to high-pressure torsion (HPT) deformation are compared in this work. Investigation of the deformed microstructures by electron microscopy and synchrotron X-ray diffraction reveal homogeneous, nanocrystalline microstructures for HPT deformed AM alloys. HPT deformation of powder blends and BM powders leads to an exorbitant increase in hardness or an unusual fast formation of a $σ$-phase and therefore impede successful processing.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo$_{5}$ Permanent Magnets Generated by High Pressure Torsion
Authors:
Lukas Weissitsch,
Martin Stückler,
Stefan Wurster,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed by HPT exhibiting sample dimensions of several millimetres, being essential for bulky magnetic applications. The structural evolution during HPT deformation of…
▽ More
High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed by HPT exhibiting sample dimensions of several millimetres, being essential for bulky magnetic applications. The structural evolution during HPT deformation of Fe-SmCo$_{5}$ compounds at room- and elevated- temperatures of chemical compositions consisting of 87, 47, 24 and 10 wt.% Fe is studied and microstructurally analysed. Electron microscopy and synchrotron X-ray diffraction reveal a dual-phase nanostructured composite for the as-deformed samples with grain refinement after HPT deformation. SQUID magnetometry measurements show hysteresis curves of an exchange coupled nanocomposite at room temperature, while for low temperatures a decoupling of Fe and SmCo$_{5}$ is observed. Furthermore, exchange interactions between the hard- and soft-magnetic phase can explain a shift of the hysteresis curve. Strong emphasis is devoted to the correlation between the magnetic properties and the evolving nano-structure during HPT deformation, which is conducted for a 1:1 composition ratio of Fe to SmCo$_{5}$. SQUID magnetometry measurements show an increasing saturation magnetisation for increasing strain $γ$ and a maximum of the coercive field strength at a shear strain of $γ$ = 75.
△ Less
Submitted 19 January, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Microstructural Changes Influencing the Magnetoresistive Behavior of Bulk Nanocrystalline Materials
Authors:
Stefan Wurster,
Martin Stueckler,
Lukas Weissitsch,
Timo Mueller,
Andrea Bachmaier
Abstract:
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which was further improved by adjusting the microstructure with thermal treatments. The adequate range of annealing temperatures was assessed with in-situ synchrotron…
▽ More
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which was further improved by adjusting the microstructure with thermal treatments. The adequate range of annealing temperatures was assessed with in-situ synchrotron diffraction measurements. Thermally treated CuCo materials show larger giant magnetoresistance after annealing for 1 h at 300C, while for CuFe this annealing temperature is too high and decreases the magnetoresistive properties. The improvement of magnetoresistivity by thermal treatments is discussed with respect to the microstructural evolution as observed by electron microscopy and ex situ synchrotron diffraction measurements.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Intermixing of Fe and Cu on the atomic scale by high-pressure torsion as revealed by DC- and AC-SQUID susceptometry and atom probe tomography
Authors:
Martin Stückler,
Heinz Krenn,
Philipp Kürnsteiner,
Baptiste Gault,
Frédéric De Geuser,
Lukas Weissitsch,
Stefan Wurster,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
The capability of high-pressure torsion on the preparation of supersaturated solid solutions, consisting of Cu-14Fe (wt.%), is studied. From microstructural investigations a steady state is obtained with nanocrystalline grains. The as-deformed state is analyzed with atom probe tomography, revealing an enhanced solubility and the presence of Fe-rich particles. The DC-hysteresis loop shows suppresse…
▽ More
The capability of high-pressure torsion on the preparation of supersaturated solid solutions, consisting of Cu-14Fe (wt.%), is studied. From microstructural investigations a steady state is obtained with nanocrystalline grains. The as-deformed state is analyzed with atom probe tomography, revealing an enhanced solubility and the presence of Fe-rich particles. The DC-hysteresis loop shows suppressed long range interactions in the as-deformed state and evolves towards a typical bulk hysteresis loop when annealed at 500°C. AC-susceptometry measurements of the as-deformed state reveal the presence of a superparamagnetic blocking peak, as well as a magnetic frustrated phase, whereas the transition of the latter follows the Almeida-Thouless line, coinciding with the microstructural investigations by atom probe tomography. AC-susceptometry shows that the frustrated state vanishes for annealing at 250°C.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Tuneable Magneto-Resistance by Severe Plastic Deformation
Authors:
Stefan Wurster,
Lukas Weissitsch,
Martin Stueckler,
Peter Knoll,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Bulk metallic samples were synthesized from different binary powder mixtures consisting of elemental Cu, Co, and Fe using severe plastic deformation. Small particles of the ferromagnetic phase originate in the conductive Cu phase, either by incomplete dissolution or by segregation phenomena during the deformation process. These small particles are known to give rise to granular giant magnetoresist…
▽ More
Bulk metallic samples were synthesized from different binary powder mixtures consisting of elemental Cu, Co, and Fe using severe plastic deformation. Small particles of the ferromagnetic phase originate in the conductive Cu phase, either by incomplete dissolution or by segregation phenomena during the deformation process. These small particles are known to give rise to granular giant magnetoresistance. Taking advantage of the simple production process, it is possible to perform a systematic study on the influence of processing parameters and material compositions on the magneto-resistance. Furthermore, it is feasible to tune the magnetoresistive behavior as a function of the specimens chemical composition. It was found that specimens of low ferromagnetic content show an almost isotropic drop in resistance in a magnetic field. With increasing ferromagnetic content, percolating ferromagnetic phases cause an anisotropy of the magnetoresistance. By changing the parameters of the high pressure torsion process, i.e., sample size, deformation temperature, and strain rate, it is possible to tailor the magnitude of giant magneto-resistance. A decrease in room temperature resistivity of approx. 3.5% was found for a bulk specimen containing an approximately equiatomic fraction of Co and Cu.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation
Authors:
Martin Stückler,
Heinz Krenn,
Reinhard Pippan,
Lukas Weissitsch,
Stefan Wurster,
Andrea Bachmaier
Abstract:
Samples consisting of one ferromagnetic and one diamagnetic component which are immiscible at the thermodynamic equilibrium (Co-Cu, Fe-Cu, Fe-Ag) are processed by high-pressure torsion at various compositions. The received microstructures are investigated by electron microscopy and synchrotron X-ray diffraction, showing a microstructural saturation. Results gained from microstructural investigatio…
▽ More
Samples consisting of one ferromagnetic and one diamagnetic component which are immiscible at the thermodynamic equilibrium (Co-Cu, Fe-Cu, Fe-Ag) are processed by high-pressure torsion at various compositions. The received microstructures are investigated by electron microscopy and synchrotron X-ray diffraction, showing a microstructural saturation. Results gained from microstructural investigations are correlated to magnetometry data. The Co-Cu samples show mainly ferromagnetic behavior and a decrease in coercivity with increasing Co-content. The saturation microstructure of Fe-Cu samples is found to be dual phase. Results of magnetic measurements also revealed the occurrence of two different magnetic phases in this system. For Fe-Ag, the microstructural and magnetic results indicate that no intermixing between the elemental phases takes place.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Magnetic dilution by severe plastic deformation
Authors:
Martin Stückler,
Lukas Weissitsch,
Stefan Wurster,
Peter Felfer,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated…
▽ More
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated with the microstructure, investigated by synchrotron X-ray diffraction and atom probe tomography. Annealing of the as-deformed states leads to demixing and grain growth, with the coercivity as a function of annealing temperature obeying the random anisotropy model. The presented results show that high-pressure torsion is a technique capable to affect the microstructure even on atomic length scales.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.