-
Optimal Constellations for the Low SNR Noncoherent MIMO Block Rayleigh Fading Channel
Authors:
Shivratna Giri Srinivasan,
Mahesh K. Varanasi
Abstract:
Reliable communication over the discrete-input/continuous-output noncoherent multiple-input multiple-output (MIMO) Rayleigh block fading channel is considered when the signal-to-noise ratio (SNR) per degree of freedom is low. Two key problems are posed and solved to obtain the optimum discrete input. In both problems, the average and peak power per space-time slot of the input constellation are…
▽ More
Reliable communication over the discrete-input/continuous-output noncoherent multiple-input multiple-output (MIMO) Rayleigh block fading channel is considered when the signal-to-noise ratio (SNR) per degree of freedom is low. Two key problems are posed and solved to obtain the optimum discrete input. In both problems, the average and peak power per space-time slot of the input constellation are constrained. In the first one, the peak power to average power ratio (PPAPR) of the input constellation is held fixed, while in the second problem, the peak power is fixed independently of the average power. In the first PPAPR-constrained problem, the mutual information, which grows as O(SNR^2), is maximized up to second order in SNR. In the second peak-constrained problem, where the mutual information behaves as O(SNR), the structure of constellations that are optimal up to first order, or equivalently, that minimize energy/bit, are explicitly characterized. Furthermore, among constellations that are first-order optimal, those that maximize the mutual information up to second order, or equivalently, the wideband slope, are characterized. In both PPAPR-constrained and peak-constrained problems, the optimal constellations are obtained in closed-form as solutions to non-convex optimizations, and interestingly, they are found to be identical. Due to its special structure, the common solution is referred to as Space Time Orthogonal Rank one Modulation, or STORM. In both problems, it is seen that STORM provides a sharp characterization of the behavior of noncoherent MIMO capacity.
△ Less
Submitted 22 September, 2008; v1 submitted 25 June, 2007;
originally announced June 2007.
-
A High Galactic Latitude HI 21cm-line Absorption Survey using the GMRT: II. Results and Interpretation
Authors:
Rekhesh Mohan,
K. S. Dwarakanath,
G. Srinivasan
Abstract:
We have carried out a sensitive high-latitude (|b| > 15deg.) HI 21cm-line absorption survey towards 102 sources using the GMRT. With a 3-sigma detection limit in optical depth of ~0.01, this is the most sensitive HI absorption survey. We detected 126 absorption features most of which also have corresponding HI emission features in the Leiden Dwingeloo Survey of Galactic neutral Hydrogen. The his…
▽ More
We have carried out a sensitive high-latitude (|b| > 15deg.) HI 21cm-line absorption survey towards 102 sources using the GMRT. With a 3-sigma detection limit in optical depth of ~0.01, this is the most sensitive HI absorption survey. We detected 126 absorption features most of which also have corresponding HI emission features in the Leiden Dwingeloo Survey of Galactic neutral Hydrogen. The histogram of random velocities of the absorption features is well-fit by two Gaussians centered at V(lsr) ~ 0 km/s with velocity dispersions of 7.6 +/- 0.3 km/s and 21 +/- 4 km/s respectively. About 20% of the HI absorption features form the larger velocity dispersion component. The HI absorption features forming the narrow Gaussian have a mean optical depth of 0.20 +/- 0.19, a mean HI column density of (1.46 +/- 1.03) X 10^{20} cm^{-2}, and a mean spin temperature of 121 +/- 69 K. These HI concentrations can be identified with the standard HI clouds in the cold neutral medium of the Galaxy. The HI absorption features forming the wider Gaussian have a mean optical depth of 0.04 +/- 0.02, a mean HI column density of (4.3 +/- 3.4) X 10^{19} cm^{-2}, and a mean spin temperature of 125 +/- 82 K. The HI column densities of these fast clouds decrease with their increasing random velocities. These fast clouds can be identified with a population of clouds detected so far only in optical absorption and in HI emission lines with a similar velocity dispersion. This population of fast clouds is likely to be in the lower Galactic Halo.
△ Less
Submitted 26 October, 2004;
originally announced October 2004.
-
A High Galactic Latitude HI 21cm-line Absorption Survey using the GMRT: I. Observations and Spectra
Authors:
Rekhesh Mohan,
K. S. Dwarakanath,
G. Srinivasan
Abstract:
We have used the Giant Meterwave Radio Telescope (GMRT) to measure the Galactic HI 21-cm line absorption towards 102 extragalactic radio continuum sources, located at high (|b| >15deg.) Galactic latitudes. The Declination coverage of the present survey is Decl. ~ -45deg.. With a mean rms optical depth of ~0.003, this is the most sensitive Galactic HI 21-cm line absorption survey to date. To supp…
▽ More
We have used the Giant Meterwave Radio Telescope (GMRT) to measure the Galactic HI 21-cm line absorption towards 102 extragalactic radio continuum sources, located at high (|b| >15deg.) Galactic latitudes. The Declination coverage of the present survey is Decl. ~ -45deg.. With a mean rms optical depth of ~0.003, this is the most sensitive Galactic HI 21-cm line absorption survey to date. To supplement the absorption data, we have extracted the HI 21-cm line emission profiles towards these 102 lines of sight from the Leiden Dwingeloo Survey of Galactic neutral hydrogen. We have carried out a Gaussian fitting analysis to identify the discrete absorption and emission components in these profiles. In this paper, we present the spectra and the components. A subsequent paper will discuss the interpretation of these results.
△ Less
Submitted 26 October, 2004;
originally announced October 2004.
-
Microwave Magnetoelectric Effects in Single Crystal Bilayers of Yttrium Iron Garnet and Lead Magnesium Niobate-Lead Titanate
Authors:
S. Shastry,
G. Srinivasan,
M. I. Bichurin,
V. M. Petrov,
A. S. Tatarenko
Abstract:
The first observation of microwave magnetoelectric (ME) interactions through ferromagnetic resonance (FMR) in bilayers of single crystal ferromagnetic-piezoelectric oxides and a theoretical model for the effect are presented. An electric field E produces a mechanical deformation in the piezoelectric phase, resulting in a shift dHE in the resonance field for the ferromagnet. The strength of ME co…
▽ More
The first observation of microwave magnetoelectric (ME) interactions through ferromagnetic resonance (FMR) in bilayers of single crystal ferromagnetic-piezoelectric oxides and a theoretical model for the effect are presented. An electric field E produces a mechanical deformation in the piezoelectric phase, resulting in a shift dHE in the resonance field for the ferromagnet. The strength of ME coupling is obtained from data on dHE vs E. Studies were performed at 9.3 GHz on bilayers of (111) yttrium iron garnet (YIG) films and (001) lead magnesium niobate-lead titanate (PMN-PT). The samples were positioned outside a TE102-reflection type cavity. Resonance profiles were obtained for E = 0-8 kV/cm for both in-plane and out-of-plane magnetic fields H. Important results are as follows. (i) The ME coupling in the bilayers is an order of magnitude stronger than in polycrystalline composites and is in the range 1-5.4 Oe cm/kOe, depending on the YIG film thickness. (ii) The coupling strength is dependent on the magnetic field orientation and is higher for out-of-plane H than for in-plane H. (iii) Estimated ME constant and its dependence on volume ratio for the two phases are in good agreement with the data.
△ Less
Submitted 26 May, 2004;
originally announced May 2004.
-
Magnetoelectric Effects in Ferromagnetic Metal-Piezoelectric Oxide Layered Structures
Authors:
U. Laletsin,
N. Paddubnaya,
G. Srinivasan,
M. I. Bichurin
Abstract:
Frequency dependence of magnetoelectric (ME) coupling is investigated in trilayers of ferromagnetic alloy and piezoelectric lead zirconate titanate (PZT). The ferromagnetic phases studied include permendur, a soft magnet with high magnetostriction, iron, nickel, and cobalt. Low frequency data on ME voltage coefficient versus bias magnetic field indicate strong coupling only for trilayers with pe…
▽ More
Frequency dependence of magnetoelectric (ME) coupling is investigated in trilayers of ferromagnetic alloy and piezoelectric lead zirconate titanate (PZT). The ferromagnetic phases studied include permendur, a soft magnet with high magnetostriction, iron, nickel, and cobalt. Low frequency data on ME voltage coefficient versus bias magnetic field indicate strong coupling only for trilayers with permendure or Ni. Measurements of frequency dependence of ME voltage reveal a giant ME coupling at electromechanical resonance. The ME interactions for transverse fields is an order of magnitude stronger than for longitudinal fields. The maximum voltage coefficient of 90 V/cm Oe at resonance is measured for samples with nickel or permendure and is three orders of magnitude higher than low-frequency values.
△ Less
Submitted 30 January, 2004;
originally announced January 2004.
-
Modeling of Magnetoelectric Effects in Ferromagnetic/Piezoelectric Bulk Composites
Authors:
V. M. Petrov,
M. I. Bichurin V. M. Laletin,
N. N. Paddubnaya,
G. Srinivasan
Abstract:
We discuss a model that considers the bulk composite as a homogeneous medium with piezoelectric and magnetostrictive subsystems. We solve combined elastostatic, electrostatic and magnetostatic equations to obtain effective composite parameters (piezoelectric modules, magnetostriction factors, compliances, magnetoelectric coefficients) for 3-0 and 0-3 connectivities. Expressions for longitudinal…
▽ More
We discuss a model that considers the bulk composite as a homogeneous medium with piezoelectric and magnetostrictive subsystems. We solve combined elastostatic, electrostatic and magnetostatic equations to obtain effective composite parameters (piezoelectric modules, magnetostriction factors, compliances, magnetoelectric coefficients) for 3-0 and 0-3 connectivities. Expressions for longitudinal and transverse low-frequency magnetoelectric voltage coefficients have been obtained for unclamped and clamped samples. Volume fractions for peak low-frequency effective magnetoelectric voltage coefficient are found to be dependent on specific connectivity. Clam** leads to significant variation in magnetoelectric voltage coefficients. The calculated magnetoelectric coefficients are compared with data.
△ Less
Submitted 30 January, 2004;
originally announced January 2004.
-
Magnetoelectric Effects in Ferromagnetic/Piezoelectric Multilayer Composites
Authors:
G. Srinivasan,
C. P. DeVreugd,
R. Hayes,
M. I. Bichurin,
V. M. Petrov
Abstract:
The observation of strong magnetoelectric effects is reported in thick film bilayers and multilayers of ferrite-lead titanate zirconate (PZT) and lanthanum nanganite-PZT. The ferrites used in our studies included pure and zinc substituted cobalt-, nickel- and lithium ferrites. Samples were prepared by sintering 10-40 mm thick films obtained by tape-casting. Measurements of ME voltage coefficient…
▽ More
The observation of strong magnetoelectric effects is reported in thick film bilayers and multilayers of ferrite-lead titanate zirconate (PZT) and lanthanum nanganite-PZT. The ferrites used in our studies included pure and zinc substituted cobalt-, nickel- and lithium ferrites. Samples were prepared by sintering 10-40 mm thick films obtained by tape-casting. Measurements of ME voltage coefficients at 10-1000 Hz indicated a giant ME effect in nickel ferrite-PZT, but a relatively weak coupling in other ferrite-PZT and manganite-PZT systems. Multilayers prepared by hot pressing was found to show a higher ME coefficient than sintered samples. Evidence was found for enhancement in ME coefficients when Zn was substituted in ferrites. The Zn-assisted increase was attributed to low anisotropy and high permeability that resulted in favorable magneto-mechanical coupling in the composites. We analyzed the data in terms of our recent comprehensive theory that takes into account actual interface conditions by introducing an interface coupling parameter. Theoretical longitudinal and transverse ME voltage coefficients for unclamped and clamped samples are in general agreement with data. From the analysis we inferred excellent interface coupling for nickel zinc ferrite-PZT and weak coupling for other layered systems.
△ Less
Submitted 30 January, 2004;
originally announced January 2004.
-
Review on Giant Magnetoelectric effects in Oxide ferromagnetic/ferroelectric Layered Structures
Authors:
G. Srinivasan
Abstract:
The synthesis of layered ferrite-lead titanate zirconate (PZT) and lanthanum nanganite-PZT and the observation of giant magneto-electric interactions are discussed. The ferrites used in our studies included pure and Zn substituted cobalt-, nickel- and lithium ferrites. Ferromagnetic manganites used included both calcium and strontium substituted systems. The samples were prepared from 10-40 mm t…
▽ More
The synthesis of layered ferrite-lead titanate zirconate (PZT) and lanthanum nanganite-PZT and the observation of giant magneto-electric interactions are discussed. The ferrites used in our studies included pure and Zn substituted cobalt-, nickel- and lithium ferrites. Ferromagnetic manganites used included both calcium and strontium substituted systems. The samples were prepared from 10-40 mm thick films obtained by tape-casting. Our studies showed strong ME coupling in manganite-PZT and cobalt zinc ferrite-PZT, and a giant ME effect in nickel zinc ferrite-PZT. We found evidence for Zn assisted enhancement in ME coefficients that were attributed to low anisotropy and high permeability that resulted in favorable magneto-mechanical coupling in the composites.
△ Less
Submitted 29 January, 2004;
originally announced January 2004.
-
Dielectric and Pyroelectric Properties of Thick Film Ferromagnetic - Piezoelectric Structures
Authors:
Y. K. Fetisov,
A. A. Bush,
K. E. Kamentsev,
G. Srinivasan
Abstract:
Layered ferromagnetic-piezoelectric composites show mechanical strain mediated electromagnetic coupling. Here we discuss dielectric and piezoelectric properties of ferrite-lead zirconate titanate (PZT) and lanthanum manganite-PZT samples. Results of our investigations on dielectric and pyroelectric properties of multilayer ferromagnetic-piezoelectric are presented here. Lead zircinate-titanate P…
▽ More
Layered ferromagnetic-piezoelectric composites show mechanical strain mediated electromagnetic coupling. Here we discuss dielectric and piezoelectric properties of ferrite-lead zirconate titanate (PZT) and lanthanum manganite-PZT samples. Results of our investigations on dielectric and pyroelectric properties of multilayer ferromagnetic-piezoelectric are presented here. Lead zircinate-titanate PbZrxTi1-xO3 (PZT) was used for the piezoelectric phase in all the structures. The following materials were used for the ferromagnetic component: nickel-zinc ferrites Ni0.9Zn 0.1Fe2O4 (NFO1) and Ni0.8Zn0.2Fe2O4 (NFO2), cobalt ferrite (CFO), lithium ferrite (LFO), lanthanum strontium manganite La0.7Sr0.3MnO3 (LSM), and lanthanum-calcium manganite La0.7Ca0.3MnO3 (LCM). The pyroelectric effect was studied by measuring the current J flowing through a closed loop containing the sample and an electrometer as the sample temperature T was slowly varied at the rate 0.1 K/s. Polarized PZT layers generate a pyroelectric current as the temperature changes. The main indicator of pyroelectric nature of the current is the sign reversal when the thermal cycle is switched from heating to cooling. Almost all of the multilayer structures showed a pyroelectric current, but the pyroelectric coefficient varied in a wide range. (i) For NFO1-PZT system the coefficient was in the range 0.01 - 10 nC/(cm2 K), depending on the temperature. (ii) CFO-PZT and LFO-PZT structures showed a large thermal current and a weak pyroelectric effect. (iii) Thermal currents, however, were absent in LCM-PZT within the temperature range from the room temperature to 400 K. (iv) In LSM-PZT, the thermal current exceeded the pyroelectric current. A model is proposed for an understanding of these results.
△ Less
Submitted 24 January, 2004;
originally announced January 2004.
-
Impurities block the alpha to omega martensitic transformation in titanium
Authors:
R. G. Hennig,
D. R. Trinkle,
J. Bouchet,
S. G. Srinivasan,
R. C. Albers,
J. W. Wilkins
Abstract:
The onset and kinetics of martensitic transformations are controlled by impurities trapped during the transformation. For the alpha to omega transformation in Ti, ab initio methods yield the changes in both the relative stability of and energy barrier between the phases. Using the recently discovered transformation pathway, we study interstitial O, N, C; substitutional Al and V; and Ti interstit…
▽ More
The onset and kinetics of martensitic transformations are controlled by impurities trapped during the transformation. For the alpha to omega transformation in Ti, ab initio methods yield the changes in both the relative stability of and energy barrier between the phases. Using the recently discovered transformation pathway, we study interstitial O, N, C; substitutional Al and V; and Ti interstitials and vacancies. The resulting microscopic picture explains the observations, specifically the suppression of the transformation in A-70 and Ti-6Al-4V titanium alloys.
△ Less
Submitted 5 September, 2003;
originally announced September 2003.
-
Low frequency and Microwave Magnetoelectric Effects in Thick Film Heterostructures of Lithium Zinc Ferrite and Lead Zirconate Titanate
Authors:
G. Srinivasan,
R. Hayes,
M. I. Bichurin
Abstract:
Magnetoelectric (ME) coupling at low frequencies and at x-band have been investigated in layered samples containing zinc substituted lithium ferrite and lead zirconate titanate (PZT). Multilayers of Li0.5-x/2ZnxFe2.5-x/2O4 (LZFO) (x=0-0.4) and PZT were prepared by lamination and sintering of thick films. At low frequencies (10-1000 Hz), the ME voltage coefficient for transverse fields is higher…
▽ More
Magnetoelectric (ME) coupling at low frequencies and at x-band have been investigated in layered samples containing zinc substituted lithium ferrite and lead zirconate titanate (PZT). Multilayers of Li0.5-x/2ZnxFe2.5-x/2O4 (LZFO) (x=0-0.4) and PZT were prepared by lamination and sintering of thick films. At low frequencies (10-1000 Hz), the ME voltage coefficient for transverse fields is higher than for longitudinal fields. With Zn substitution in the ferrite, transverse coupling increases to a maximum for x=0.3 and then decreases for higher x. Analysis based on our model for a bilayer implies an efficient magneto-mechanical coupling with Zn substitution, resulting in strong ME interactions. Microwave ME coupling is studied through measurements of shift in the ferromagnetic resonance field due to an applied electric field. Estimated ME constants from such data are in agreement with our model for a ferrite-PZT bilayer.
△ Less
Submitted 8 August, 2003;
originally announced August 2003.
-
Dynamic Magnetoelectric Effects in Bulk and Layered composites of Cobalt Zinc Ferrite and Lead Zirconate Titanate
Authors:
G. Srinivasan,
R. Hayes,
C. P. DeVreugd,
V. M. Laletsin,
N. Padubnaya
Abstract:
Low frequency magnetoelectric (ME) coupling has been investigated in bulk and multilayers of cobalt zinc ferrite, Co1-xZnxFe2O4 (x=0-0.6), and lead zirconate titanate. In bulk samples, the transverse and longitudinal couplings are weak and are of equal magnitude. A substantial strengthening of ME interactions is evident in layered structures, with the ME voltage coefficient a factor of 10-30 hig…
▽ More
Low frequency magnetoelectric (ME) coupling has been investigated in bulk and multilayers of cobalt zinc ferrite, Co1-xZnxFe2O4 (x=0-0.6), and lead zirconate titanate. In bulk samples, the transverse and longitudinal couplings are weak and are of equal magnitude. A substantial strengthening of ME interactions is evident in layered structures, with the ME voltage coefficient a factor of 10-30 higher than in bulk samples. Important findings of the studies in layered composites are as follows. (i) The transverse coupling is stronger than the longitudinal coupling. (ii) The strength of ME interactions is dependent on Zn substitution with a maximum for x=0.4. (iii) Analysis of volume and static magnetic field dependence of ME voltage coefficients reveal a weak coupling at the ferromagnetic-piezoelectric interface. (iv) The interface coupling k increases with Zn substitution and k versus x profile shows a maximum centered at x=0.4. (iv) The Zn-assisted enhancement is attributed to efficient magneto-mechanical coupling in the ferrite.
△ Less
Submitted 23 July, 2003;
originally announced July 2003.
-
Structural and magnetoelectric properties of MFe2O4-PZT (M=Ni,Co) and (La)x(Ca,Sr)1-x - PZT multilayers
Authors:
G. Srinivasan,
E. T. Rasmussen,
A. A. Bush,
K. E. Kamentsev,
V. F. Meshcheryakov,
Y. K. Fetisov
Abstract:
Thick film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite (CFO), La0.7Sr0.3MnO3 (LSMO), or La0.7Ca0.3MnO3 (LCMO) and lead zirconate titanate (PZT). Structural, magnetic and ferromagnetic resonance characterization shows evidence for defect free ferrites, but deterioration of manganite paramet…
▽ More
Thick film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite (CFO), La0.7Sr0.3MnO3 (LSMO), or La0.7Ca0.3MnO3 (LCMO) and lead zirconate titanate (PZT). Structural, magnetic and ferromagnetic resonance characterization shows evidence for defect free ferrites, but deterioration of manganite parameters. The resistivity and dielectric constants are smaller than expected values. The magnetoelectric effect (ME) is stronger in ferrite-PZT than in manganite-PZT. The ME voltage coefficient aE at room temperature is the highest in NFO-PZT and the smallest for LCMO-PZT. The transverse ME effect is an order of magnitude stronger than the longitudinal effect. The magnitude of aE correlates well with magnetic permeability for the ferrites.
△ Less
Submitted 13 July, 2003;
originally announced July 2003.
-
Magnetic and microwave properties of (Ni,Co)Fe2O4-ferroelectric and (La,Ca,Sr)MnO3-ferroelectric multilayer structures
Authors:
A. A. Bush,
Y. K. Fetisov,
K. E. Kamentsev,
V. F. Meshcheryakov,
G. Srinivasan
Abstract:
Structural, magnetic and ferromagnetic resonance characterization studies have been performed on lay-ered ferromagnetic-ferroelectric oxides that show strong magnetoelectric coupling. The samples contained thick films of ferrites or substituted lanthanum manganites for the ferromagnetic phase and lead zirconate titanate for the ferroelectric phase, and were sintered high temperatures. Results in…
▽ More
Structural, magnetic and ferromagnetic resonance characterization studies have been performed on lay-ered ferromagnetic-ferroelectric oxides that show strong magnetoelectric coupling. The samples contained thick films of ferrites or substituted lanthanum manganites for the ferromagnetic phase and lead zirconate titanate for the ferroelectric phase, and were sintered high temperatures. Results indicate defect free ferrites, but deterioration of manganite parameters due to diffusion at the interface and accounts for poor magnetoelectric coupling in manganite-PZT samples.
△ Less
Submitted 12 July, 2003;
originally announced July 2003.
-
Theory of low frequency magnetoelectric coupling in magnetostrictive-piezoelectric bilayers
Authors:
M. I. Bichurin,
V. M. Petrov,
G. Srinivasan
Abstract:
A theoretical model is presented for low-frequency magnetoelectric (ME) effects in bilayers of magnetostrictive and piezoelectric phases. A novel approach, the introduction of an interface coupling parameter k, is proposed for the consideration of actual boundary conditions at the interface. An averaging method is used to estimate effective material parameters. Expressions for ME voltage coeffic…
▽ More
A theoretical model is presented for low-frequency magnetoelectric (ME) effects in bilayers of magnetostrictive and piezoelectric phases. A novel approach, the introduction of an interface coupling parameter k, is proposed for the consideration of actual boundary conditions at the interface. An averaging method is used to estimate effective material parameters. Expressions for ME voltage coefficients are obtained by solving elastostatic and electrostatic equations. We consider both unclamped and rigidly clamped bilayers and three different field orientations of importance: (i) longitudinal fields in which the poling field, bias field and ac fields are all parallel to each other and perpendicular to the sample plane; (ii) transverse fields for magnetic fields parallel to each other and perpendicular to electric fields, and (iii) in-plane longitudinal fields for all the fields parallel to each other and to the sample plane. The theory predicts a giant ME coupling for bilayers with cobalt ferrite (CFO), nickel ferrite (NFO), or lanthanum strontium manganite (LSMO) for the magnetostrictive phase and barium titanate (BTO) or lead zirconate titanate (PZT) for the piezoelectric phase.
△ Less
Submitted 10 July, 2003;
originally announced July 2003.
-
Frequency Dependence of Magnetoelectric Interactions in Layered Structures of Ferromagnetic Alloys and Piezoelectric Oxides
Authors:
U. Laletsin,
N. Padubnaya,
G. Srinivasan,
C. P. DeVreugd
Abstract:
Magnetoelectric (ME) interactions in layered structures of magnetostrictive and piezoelectric phases are mediated by mechanical deformation. Here we discuss the frequency dependence of ME coupling in bilayers and trilayers of Permendur, a ferromagnetic alloy, and lead zirconate titanate. Data on ME voltage coefficient versus frequency profiles reveal a giant ME coupling at electromechanical reso…
▽ More
Magnetoelectric (ME) interactions in layered structures of magnetostrictive and piezoelectric phases are mediated by mechanical deformation. Here we discuss the frequency dependence of ME coupling in bilayers and trilayers of Permendur, a ferromagnetic alloy, and lead zirconate titanate. Data on ME voltage coefficient versus frequency profiles reveal a giant ME coupling at electromechanical resonance. The maximum voltage coefficient of 90 V/cm Oe is three orders of magnitude higher than low-frequency values. The ME interactions for transverse fields is an order of magnitude stronger than for longitudinal fields. These results are in agreement with theory. The resonance ME effect, therefore, is a novel tool for enhancing the magnetic-to-electric field conversion efficiency in the composites.
△ Less
Submitted 9 July, 2003;
originally announced July 2003.
-
Resonance magnetoelectric effects in layered magnetostrictive-piezoelectric composites
Authors:
M. I. Bichurin,
D. A. Fillipov,
V. M. Petrov,
V. M. Laletsin,
G. Srinivasan
Abstract:
Magnetoelectric interactions in bilayers of magnetostrictive and piezoelectric phases are mediated by mechanical deformation. Here we discuss the theory and companion data for magnetoelectric (ME) coupling at electromechanical resonance (EMR) in a ferrite-lead zirconate titanate (PZT) bilayer. Estimated ME voltage coefficient versus frequency profiles for nickel, cobalt, or lithium ferrite and P…
▽ More
Magnetoelectric interactions in bilayers of magnetostrictive and piezoelectric phases are mediated by mechanical deformation. Here we discuss the theory and companion data for magnetoelectric (ME) coupling at electromechanical resonance (EMR) in a ferrite-lead zirconate titanate (PZT) bilayer. Estimated ME voltage coefficient versus frequency profiles for nickel, cobalt, or lithium ferrite and PZT reveal a giant ME effect at EMR with the highest coupling expected for cobalt ferrite-PZT. Measurements of resonance ME coupling have been carried out on layered and bulk composites of nickel ferrite-PZT. We observe a factor of 40-600 increase in ME voltage coefficient at EMR compared to low frequency values. Theoretical ME voltage coefficients versus frequency profiles are in excellent agreement with data. The resonance ME effect is therefore a novel tool for enhancing the field conversion efficiency in the composites.
△ Less
Submitted 19 June, 2003;
originally announced June 2003.
-
Non-clasical Nucleation in Supercooled Nickel
Authors:
F. J. Cherne,
M. I. Baskes,
R. B. Schwarz,
S. G. Srinivasan,
W. Klein
Abstract:
The dynamics of homogeneous nucleation and growth of crystalline nickel from the super-cooled melt is examined during rapid quenching using molecular dynamics and a modified embedded atom method potential. The character of the critical nuclei of the crystallization transition is examined using common neighbor analysis and visualization. At nucleation the saddle point droplet consists of randomly…
▽ More
The dynamics of homogeneous nucleation and growth of crystalline nickel from the super-cooled melt is examined during rapid quenching using molecular dynamics and a modified embedded atom method potential. The character of the critical nuclei of the crystallization transition is examined using common neighbor analysis and visualization. At nucleation the saddle point droplet consists of randomly stacked planar structures with an in plane triangular order. These results are consistent with previous theoretical results that predict that the nucleation process in some metals is non-classical due to the presence of long-range forces and a spinodal.
△ Less
Submitted 24 February, 2003;
originally announced February 2003.
-
A New Mechanism for the Alpha to Omega Martensitic Transformation in Pure Titanium
Authors:
D. R. Trinkle,
R. G. Hennig,
S. G. Srinivasan,
D. M. Hatch,
M. D. Jones,
H. T. Stokes,
R. C. Albers,
J. W. Wilkins
Abstract:
We propose a new direct mechanism for the pressure driven alpha to omega martensitic transformation in pure titanium. A systematic algorithm enumerates all possible mechanisms whose energy barriers are evaluated. A new, homogeneous mechanism emerges with a barrier at least four times lower than other mechanisms. This mechanism remains favorable in a simple nucleation model.
We propose a new direct mechanism for the pressure driven alpha to omega martensitic transformation in pure titanium. A systematic algorithm enumerates all possible mechanisms whose energy barriers are evaluated. A new, homogeneous mechanism emerges with a barrier at least four times lower than other mechanisms. This mechanism remains favorable in a simple nucleation model.
△ Less
Submitted 7 January, 2003;
originally announced January 2003.
-
Mechanism for BCC to HCP Transformation: Generalization of the Burgers Model
Authors:
S. G. Srinivasan,
D. M. Hatch,
H. T. Stokes,
A. Saxena,
R. C. Albers,
T. Lookman
Abstract:
Many structural transformations involve a group-nonsubgroup relationship between the initial and transformed phases, and hence are beyond the purview of conventional Landau theory. We utilize a systematic and robust methodology to describe such reconstructive martensitic transformations by coupling group-theoretical arguments to first-principles calculations. In this context we (i) use a symmetr…
▽ More
Many structural transformations involve a group-nonsubgroup relationship between the initial and transformed phases, and hence are beyond the purview of conventional Landau theory. We utilize a systematic and robust methodology to describe such reconstructive martensitic transformations by coupling group-theoretical arguments to first-principles calculations. In this context we (i) use a symmetry-based algorithm to enumerate transformation paths, (ii) evaluate the energy barriers along these transformation paths using all-electron first principles calculations, (iii) deduce the full set of primary and secondary order parameters for each path to establish the appropriate Ginzburg-Landau free-energy functionals, and (iv) for each path, identify special points of the primary order parameter, as a function of local distortions, corresponding to the end product phase. We apply this method to the study of a pressure driven body-centered cubic (bcc) to hexagonal close-packed (hcp) transformation in titanium. We find a generalization of the Burgers mechanism, and also find that there is no energy barrier to this transformation. In fact, surprisingly, we also find a region of volumes in which the intermediate path becomes more stable than either of the end-points (bcc or hcp). We therefore predict a new orthorhombic phase for Ti between 51 and 62 GPa.
△ Less
Submitted 23 September, 2002;
originally announced September 2002.
-
GMRT Observations of Interstellar Clouds in the 21cm line of Atomic Hydrogen
Authors:
Rekhesh Mohan,
K. S. Dwarakanath,
G. Srinivasan,
Jayaram N. Chengalur
Abstract:
Nearby interstellar clouds with high (|v| >/= 10 km/s) random velocities although easily detected in NaI and CaII lines have hitherto not been detected (in emission or absorption) in the HI 21cm line. We describe here deep Giant Metrewave Radio Telescope (GMRT) HI absorption observations toward radio sources with small angular separation from bright O and B stars whose spectra reveal the presenc…
▽ More
Nearby interstellar clouds with high (|v| >/= 10 km/s) random velocities although easily detected in NaI and CaII lines have hitherto not been detected (in emission or absorption) in the HI 21cm line. We describe here deep Giant Metrewave Radio Telescope (GMRT) HI absorption observations toward radio sources with small angular separation from bright O and B stars whose spectra reveal the presence of intervening high random velocity CaII absorbing clouds. In 5 out of the 14 directions searched we detect HI 21cm absorption features from these clouds. The mean optical depth of these detections is ~ 0.09 and FWHM is ~ 10 km/s, consistent with absorption arising from CNM clouds.
△ Less
Submitted 17 March, 2001;
originally announced March 2001.
-
HI 21cm-line observations with the GMRT towards interstellar clouds previously seen in optical absorption
Authors:
Rekhesh Mohan,
K. S. Dwarakanath,
G. Srinivasan,
Jayaram N. Chengalur
Abstract:
We have made HI 21cm-line absorption measurements using the GMRT towards 15 directions in the Galaxy which are known to have high random velocity clouds as seen in the optical absorption lines of CaII and NaI. For the first time, in 6 out of these 15 directions we detect HI absorption features corresponding to the high random velocity optical absorption lines. The mean optical depth of these det…
▽ More
We have made HI 21cm-line absorption measurements using the GMRT towards 15 directions in the Galaxy which are known to have high random velocity clouds as seen in the optical absorption lines of CaII and NaI. For the first time, in 6 out of these 15 directions we detect HI absorption features corresponding to the high random velocity optical absorption lines. The mean optical depth of these detections is ~ 0.08.
△ Less
Submitted 11 April, 2000;
originally announced April 2000.
-
Molecular gas associated with the IRAS-Vela shell
Authors:
Jayadev Rajagopal,
G. Srinivasan
Abstract:
We present a survey of molecular gas in the J = 1 -> 0 transition of 12CO towards the IRAS Vela shell. The shell, previously identified from IRAS maps, is a ring-like structure seen in the region of the Gum Nebula. We confirm the presence of molecular gas associated with some of the infrared point sources seen along the Shell. We have studied the morphology and kinematics of the gas and conclude…
▽ More
We present a survey of molecular gas in the J = 1 -> 0 transition of 12CO towards the IRAS Vela shell. The shell, previously identified from IRAS maps, is a ring-like structure seen in the region of the Gum Nebula. We confirm the presence of molecular gas associated with some of the infrared point sources seen along the Shell. We have studied the morphology and kinematics of the gas and conclude that the shell is expanding at the rate of ~ 13 km/s from a common center. We go on to include in this study the Southern Dark Clouds seen in the region. The distribution and motion of these objects firmly identify them as being part of the shell of molecular gas. Estimates of the mass of gas involved in this expansion reveal that the shell is a massive object comparable to a GMC. From the expansion and various other signatures like the presence of bright-rimmed clouds with head-tail morphology, clumpy distribution of the gas etc., we conjecture that the molecular gas we have detected is the remnant of a GMC in the process of being disrupted and swept outwards through the influence of a central OB association, itself born of the parent cloud.
△ Less
Submitted 11 June, 1999;
originally announced June 1999.
-
The interstellar clouds of Adams and Blaauw revisited: an HI absorption study - II
Authors:
Jayadev Rajagopal,
G. Srinivasan,
K. S. Dwarakanath
Abstract:
In the preceding paper (paper I), we presented HI absorption spectra towards radio sources very close to the lines of sight towards 25 bright stars against which optical absorption spectra had been obtained earlier. In this paper we analyse the results and draw some conclusions.
To summarize briefly, in most cases we found HI absorption at velocities corresponding to the optical absorption fea…
▽ More
In the preceding paper (paper I), we presented HI absorption spectra towards radio sources very close to the lines of sight towards 25 bright stars against which optical absorption spectra had been obtained earlier. In this paper we analyse the results and draw some conclusions.
To summarize briefly, in most cases we found HI absorption at velocities corresponding to the optical absorption features provided the velocities were < 10 km/s. At higher velocities we did not detect any HI absorption down to an optical depth limit of 0.1 (except in four cases which we attribute to gas in systematic motion rather than clouds in random motion). After discussing various scenarios, we suggest that this trend should perhaps be understood in terms of the high velocity interstellar clouds being accelerated, heated and ablated by expanding supernova remnants.
△ Less
Submitted 19 April, 1999;
originally announced April 1999.
-
The interstellar clouds of Adams and Blaauw revisited: an HI absorption study - I
Authors:
Jayadev Rajagopal,
G. Srinivasan,
K. S. Dwarakanath
Abstract:
This investigation is aimed at clarifying the nature of the interstellar gas seen in absorption against bright O and B stars. Towards this end we have obtained for the first time HI absorption spectra towards radio sources very close to the lines of sight towards 25 bright stars previously studied. In this paper we describe the selection criteria, the details regarding our observations, and fina…
▽ More
This investigation is aimed at clarifying the nature of the interstellar gas seen in absorption against bright O and B stars. Towards this end we have obtained for the first time HI absorption spectra towards radio sources very close to the lines of sight towards 25 bright stars previously studied. In this paper we describe the selection criteria, the details regarding our observations, and finally present the absorption spectra. In the accompanying paper we analyse the results and draw conclusions.
△ Less
Submitted 19 April, 1999;
originally announced April 1999.
-
The Radius of Convergence and the Well-Posedness of the Painlevé Expansions of the Korteweg-deVries equation
Authors:
Nalini Joshi,
Gopala K. Srinivasan
Abstract:
In this paper we obtain explicit lower bounds for the radius of convergence of the Painlevé expansions of the Korteweg-de-Vries equation around a movable singularity manifold ${\Cal S}$ in terms of the sup norms of the arbitrary functions involved. We use this estimate to prove the well-posedness of the singular Cauchy problem on ${\Cal S}$ in the form of continuous dependence of the meromorphic…
▽ More
In this paper we obtain explicit lower bounds for the radius of convergence of the Painlevé expansions of the Korteweg-de-Vries equation around a movable singularity manifold ${\Cal S}$ in terms of the sup norms of the arbitrary functions involved. We use this estimate to prove the well-posedness of the singular Cauchy problem on ${\Cal S}$ in the form of continuous dependence of the meromorphic solution on the arbitrary data.
△ Less
Submitted 22 July, 1996;
originally announced July 1996.
