-
Modification of Jet Velocities in an Explosively Loaded Copper Target with a Conical Defect
Authors:
Michael P. Hennessey,
Finnegan Wilson,
Grace I. Rabinowitz,
Max J. Sevcik,
Kadyn J. Tucker,
Dylan J. Kline,
David K. Amondson,
H. Keo Springer,
Kyle T. Sullivan,
Veronica Eliasson,
Jonathan L. Belof
Abstract:
In this work, the design and execution of an experiment with the goal of demonstrating control over the evolution of a copper jet is described. Simulations show that when using simple multi-material buffers placed between a copper target with a conical defect and a cylinder of high-explosive, a variety of jetting behaviors occur based on material placement, including both jet velocity augmentation…
▽ More
In this work, the design and execution of an experiment with the goal of demonstrating control over the evolution of a copper jet is described. Simulations show that when using simple multi-material buffers placed between a copper target with a conical defect and a cylinder of high-explosive, a variety of jetting behaviors occur based on material placement, including both jet velocity augmentation and mitigation. A parameter sweep was performed to determine optimal buffer designs in two configurations. Experiments using the optimal buffer designs verified the effectiveness of the buffer and validated the modeling.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Reducing Richtmyer Meshkov Instability Jet Velocity via Inverse Design
Authors:
Dylan J. Kline,
Michael P. Hennessey,
David K. Amondson,
Steve Lin,
Michael D. Grapes,
Massimiliano Ferrucci,
Peggy Li,
H. Keo Springer,
Robert V. Reeves,
Kyle T. Sullivan,
Jonathan L. Belof
Abstract:
In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analogue. The shaped charge jet analogue comprises a conical copper liner, high explosive (HE), and silicone buffer. We apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and th…
▽ More
In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analogue. The shaped charge jet analogue comprises a conical copper liner, high explosive (HE), and silicone buffer. We apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and the HE that results in the largest possible change in jet velocity. The use of a genetic algorithm allows for discoveries of unintuitive, complex, yet optimal buffer designs. Experiments using the optimal design verified the effectiveness of the buffer and validated the modeling.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Data-scarce surrogate modeling of shock-induced pore collapse process
Authors:
Siu Wun Cheung,
Youngsoo Choi,
H. Keo Springer,
Teeratorn Kadeethum
Abstract:
Understanding the mechanisms of shock-induced pore collapse is of great interest in various disciplines in sciences and engineering, including materials science, biological sciences, and geophysics. However, numerical modeling of the complex pore collapse processes can be costly. To this end, a strong need exists to develop surrogate models for generating economic predictions of pore collapse proc…
▽ More
Understanding the mechanisms of shock-induced pore collapse is of great interest in various disciplines in sciences and engineering, including materials science, biological sciences, and geophysics. However, numerical modeling of the complex pore collapse processes can be costly. To this end, a strong need exists to develop surrogate models for generating economic predictions of pore collapse processes. In this work, we study the use of a data-driven reduced order model, namely dynamic mode decomposition, and a deep generative model, namely conditional generative adversarial networks, to resemble the numerical simulations of the pore collapse process at representative training shock pressures. Since the simulations are expensive, the training data are scarce, which makes training an accurate surrogate model challenging. To overcome the difficulties posed by the complex physics phenomena, we make several crucial treatments to the plain original form of the methods to increase the capability of approximating and predicting the dynamics. In particular, physics information is used as indicators or conditional inputs to guide the prediction. In realizing these methods, the training of each dynamic mode composition model takes only around 30 seconds on CPU. In contrast, training a generative adversarial network model takes 8 hours on GPU. Moreover, using dynamic mode decomposition, the final-time relative error is around 0.3% in the reproductive cases. We also demonstrate the predictive power of the methods at unseen testing shock pressures, where the error ranges from 1.3% to 5% in the interpolatory cases and 8% to 9% in extrapolatory cases.
△ Less
Submitted 2 June, 2023; v1 submitted 31 May, 2023;
originally announced June 2023.
-
Metallurgical synthesis methods for Mg-Al-Ca scientific model materials
Authors:
W. Luo,
L. Tanure,
M. Felten,
J. Nowak,
W. Delis,
M. Freund,
N. Ayeb,
D. Zander,
C. Thomas,
M. Feuerbacher,
S. Sandlöbes-Haut,
S. Korte-Kerzel,
H. Springer
Abstract:
Mg-based alloys are industrially used for structural applications, both as solid solutions alloys and as composites containing intermetallic compounds. However, a further development in terms of mechanical properties requires the investigation of underlying causalities between synthesis, processing and microstructure to adjust the mechanical and the corrosion properties, ideally down to the near a…
▽ More
Mg-based alloys are industrially used for structural applications, both as solid solutions alloys and as composites containing intermetallic compounds. However, a further development in terms of mechanical properties requires the investigation of underlying causalities between synthesis, processing and microstructure to adjust the mechanical and the corrosion properties, ideally down to the near atomic scale. Such fundamental scientific investigations with high resolution characterisation techniques require model materials of exceptionally high purity and strictly controlled microstructure e.g. with respect to grain size, morphology, chemical homogeneity as well as content and size of oxide inclusions. In this context, the Mg-Al-Ca system appears exceptionally challenging from a metallurgical perspective due to the high reactivity and high vapor pressures, so that conventional industrial techniques cannot be successfully deployed. Here, we demonstrate the applicability of various scientific synthesis methods from arc melting over solution growth to diffusion couples, extending to effects and parameters for thermo-mechanical processing. Suitable pathways to overcome the specific challenges of the Mg-Al-Ca system are demonstrated, as well as the persistent limitations of the current state of the art laboratory metallurgy technology.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Chemical and structural characterization of the native oxide scale on a Mg-based alloy
Authors:
Deborah Neuß,
Ingrid E. McCarroll,
Siyuan Zhang,
Eric Woods,
Wassilios J. Delis,
Leandro Tanure,
Hauke Springer,
Stefanie Sandlöbes,
**g Yang,
Mira Todorova,
Daniela Zander,
Christina Scheu,
Jochen M. Schneider,
Marcus Hans
Abstract:
In this study, the structure and composition of the native oxide forming on the basal plane (0001) of Mg-2Al-0.1Ca is investigated by a correlative approach, combining scanning transmission electron microscopy (STEM) and atom probe tomography (APT). Atom probe specimens were prepared conventionally in a Ga focused ion beam (FIB) as well as a Xe plasma FIB in a cryogenic setup and subsequently clea…
▽ More
In this study, the structure and composition of the native oxide forming on the basal plane (0001) of Mg-2Al-0.1Ca is investigated by a correlative approach, combining scanning transmission electron microscopy (STEM) and atom probe tomography (APT). Atom probe specimens were prepared conventionally in a Ga focused ion beam (FIB) as well as a Xe plasma FIB in a cryogenic setup and subsequently cleaned in the atom probe to remove surface contamination before oxidation. While thermal energy input from the laser and longer atmospheric exposure time increased the measured hydrogen content in the specimen's apex region, cryo preparation revealed, that the hydrogen uptake in magnesium is independent of the employment of conventional or cryogenic FIB preparation. TEM measurements demonstrated the growth of a (111) MgO oxide layer with 3-4 nm thickness on the basal (0001) plane of the Mg atom probe specimen. APT data further revealed the formation of an aluminum-rich region between bulk Mg and the native oxide. The aluminum enrichment of up to ~20 at.% at the interface is consistent with an inward growth of the oxide scale.
△ Less
Submitted 2 June, 2023; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Intergranular Hotspots: A Molecular Dynamics Study on the Influence of Compressive and Shear Work
Authors:
Brenden W. Hamilton,
Matthew P. Kroonblawd,
Jalen Macatangay,
H. Keo Springer,
Alejandro Strachan
Abstract:
Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosive initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. We assess hotspots formed at shock…
▽ More
Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosive initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. We assess hotspots formed at shocked crystal-crystal interfaces using quasi-1D molecular dynamics simulations that isolate effects due to compression and shear. Two high explosive materials are considered (TATB and PETN) that exhibit distinctly different levels of molecular conformational flexibility and crystal packing anisotropy. Temperature and intra-molecular strain energy localization in the hotspot is assessed through parametric variation of the crystal orientation and two velocity components that respectively modulate compression and shear work. The resulting hotspots are found to be highly localized to a region within 5-20 nm of the crystal-crystal interface. Compressive work plays a considerably larger role in localizing temperature and intra-molecular strain energy for both materials and all crystal orientations considered. Shear induces a moderate increase in energy localization relative to unsheared cases only for relatively weak compressive shock pressures of approximately 10 GPa. These results help isolate and rank the relative importance of hotspot generation mechanisms and are anticipated to guide the treatment of crystal-crystal interfaces in coarse-grained models of polycrystalline high explosive materials.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Sustainable steel through hydrogen plasma reduction of iron ore: process, kinetics, microstructure, chemistry
Authors:
I. R. Souza Filho,
Y. Ma,
M. Kulse,
D. Ponge,
B. Gault,
H. Springer,
D. Raabe
Abstract:
Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from it…
▽ More
Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from its ores. The H-based direct reduction has been explored as a sustainable route to mitigate CO2 emissions, where the reduction kinetics of the intermediate oxide product FexO wustite into Fe is the rate-limiting step of the process. The total reaction has an endothermic net energy balance. Reduction based on a H plasma may offer an attractive alternative. Here, we present a study about the reduction of hematite using H plasma. The evolution of both, chemical composition and phase transformations was investigated in several intermediate states. We found that hematite reduction kinetics depends on the balance between the initial input mass and the arc power. For an optimized input mass-arc power ratio, complete reduction was obtained within 15 min of exposure to the H plasma. The wustite reduction is also the rate-limiting step towards complete reduction. Nonetheless, the reduction reaction is exothermic, and its rates are comparable with those found in H-based direct reduction. Chemical and microstructure analysis revealed that the gangue elements partition to the remaining oxide regions, probed by energy dispersive spectroscopy and atom probe tomography. Si-enrichment was observed in the interdendritic fayalite domains, at the wustite/Fe hetero-interfaces and in the primarily solidified oxide particles inside the Fe. With proceeding reduction, however, such elements are gradually removed from the samples so that the final iron product is nearly free of gangue-related impurities.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Green steel at its crossroads: hybrid hydrogen-based reduction of iron ores
Authors:
Isnaldi R. Souza Filho1,
Hauke Springer,
Yan Ma,
Ankita Mahajan,
Cauê C. da Silva,
Michael Kulse,
Dierk Raabe
Abstract:
Iron- and steelmaking cause ~7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to reduce emissions. However, production of hydrogen using renewable energy will remain a bottlenecks, because making the annual crude steel production of 1.8 billion tons sustainable requires a minimum amount of ~97 mi…
▽ More
Iron- and steelmaking cause ~7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to reduce emissions. However, production of hydrogen using renewable energy will remain a bottlenecks, because making the annual crude steel production of 1.8 billion tons sustainable requires a minimum amount of ~97 million tons of green hydrogen per year. Another fundamental aspect to make ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wustite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700°C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve conversion into liquid iron.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Design of a V-Ti-Ni alloy with superelastic nano-precipitates
Authors:
J. -L. Zhang,
J. L. Cann,
S. B. Maisel,
K. Qu,
E. Plancher,
H. Springer,
E. Povoden-Karadeniz,
P. Gao,
Y. Ren,
B. Grabowski,
C. C. Tasan
Abstract:
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilize…
▽ More
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V45Ti30Ni25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) beta matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed
△ Less
Submitted 26 March, 2021; v1 submitted 25 March, 2021;
originally announced March 2021.
-
On the influence of Al-concentration on the fracture toughness of NiAl: microcantilever fracture tests and atomistic simulations
Authors:
Ralf Webler,
Polina N. Baranova,
Shivraj Karewar,
Steffen Neumeier,
Johannes J. Möller,
Hauke Springer,
Mathias Göken,
Erik Bitzek
Abstract:
The mechanical properties of the stoichiometric B2 $β$-phase of NiAl are well established, however the effect of off-stoichiometric composition on the fracture toughness has not yet been systematically studied over the entire composition range of 40-50% Al. Here we use microbending tests on notched cantilever beams FIB-milled from NiAl single crystals with an aluminized as well as an oxidation-ind…
▽ More
The mechanical properties of the stoichiometric B2 $β$-phase of NiAl are well established, however the effect of off-stoichiometric composition on the fracture toughness has not yet been systematically studied over the entire composition range of 40-50% Al. Here we use microbending tests on notched cantilever beams FIB-milled from NiAl single crystals with an aluminized as well as an oxidation-induced composition gradient to determine the influence of the Al concentration on the mechanical properties. The fracture toughness is maximal for the stoichiometric composition. It decreases with increasing Ni-content in the Ni-rich composition range, where plastic deformation is observed to accompany the fracture process. In contrast, no plasticity is observed in Al-rich NiAl, which shows a nearly concentration-independent, low fracture toughness. The theoretical fracture toughness according to Griffith, however, shows only a very weak composition dependence in both, the Ni- and Al-rich composition range. The differences in fracture toughness could furthermore not be explained solely based on the different hardening contributions of Ni-antisites in the Ni-rich and structural vacancies in the Al-rich crystals. Atomistic fracture simulations show that crack propagation in NiAl takes place by the nucleation and migration of kinks on the crack front. The low fracture toughness of Al-rich NiAl can thus be understood by the dual effect of structural vacancies as strong obstacles to dislocation motion and as source of crack front kinks.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.