-
Resistive Hose modes in Tokamak Runaway Electron Beams
Authors:
A. P. Sainterme,
C. R. Sovinec
Abstract:
Beams of energetic runaway electrons are generated during disruptions in tokamaks, and fluid models are used to study their effects on macroscale dynamics. Linear computations of a massless, runaway electron beam coupled to MHD plasma show that resistive hose instabilities grow faster than tearing modes at large resistivity. Eigenvalue results with reduced models of the resistive hose instability…
▽ More
Beams of energetic runaway electrons are generated during disruptions in tokamaks, and fluid models are used to study their effects on macroscale dynamics. Linear computations of a massless, runaway electron beam coupled to MHD plasma show that resistive hose instabilities grow faster than tearing modes at large resistivity. Eigenvalue results with reduced models of the resistive hose instability are compared with results from the full MHD and beam system, showing that the resistive hose decouples from any plasma response. An estimate of plasma temperature at which growth of the resistive hose dominates tearing for post-disruption DIII-D plasma parameters is in a physically relevant regime
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Laminar and Turbulent Plasmoid Ejection in a Laboratory Parker Spiral Current Sheet
Authors:
Ethan E. Peterson,
Douglass A. Endrizzi,
Michael Clark,
Jan Egedal,
Kenneth Flanagan,
Nuno F. Loureiro,
Jason Milhone,
Joseph Olson,
Carl R. Sovinec,
John Wallace,
Cary B. Forest
Abstract:
Quasi-periodic plasmoid formation at the tip of magnetic streamer structures is observed to occur in experiments on the Big Red Ball as well as in simulations of these experiments performed with the extended-MHD code, NIMROD. This plasmoid formation is found to occur on a characteristic timescale dependent on pressure gradients and magnetic curvature in both experiment and simulation. Single mode,…
▽ More
Quasi-periodic plasmoid formation at the tip of magnetic streamer structures is observed to occur in experiments on the Big Red Ball as well as in simulations of these experiments performed with the extended-MHD code, NIMROD. This plasmoid formation is found to occur on a characteristic timescale dependent on pressure gradients and magnetic curvature in both experiment and simulation. Single mode, or laminar, plasmoids exist when the pressure gradient is modest, but give way to turbulent plasmoid ejection when the system drive is higher, producing plasmoids of many sizes. However, a critical pressure gradient is also observed, below which plasmoids are never formed. A simple heuristic model of this plasmoid formation process is presented and suggested to be a consequence of a dynamic loss of equilibrium in the high-$β$ region of the helmet streamer. This model is capable of explaining the periodicity of plasmoids observed in the experiment and simulations and produces plasmoid periods of 90 minutes when applied to 2D models of solar streamers with a height of $3R_\odot$. This is consistent with the location and frequency at which periodic plasma blobs have been observed to form by LASCO and SECCHI instruments.
△ Less
Submitted 22 June, 2021; v1 submitted 13 April, 2021;
originally announced April 2021.
-
3D simulations of vertical displacement events in tokamaks: A benchmark of M3D-C$^1$, NIMROD and JOREK
Authors:
F. J. Artola,
C. R. Sovinec,
S. C. Jardin,
M. Hoelzl,
I. Krebs,
C. Clauser
Abstract:
In recent years, the nonlinear 3D magnetohydrodynamic codes JOREK, M3D-C$^1$ and NIMROD developed the capability of modelling realistic 3D vertical displacement events (VDEs) including resistive walls. In this paper, a comprehensive 3D VDE benchmark is presented between these state of the art codes. The simulated case is based on an experimental NSTX plasma but with a simplified rectangular wall.…
▽ More
In recent years, the nonlinear 3D magnetohydrodynamic codes JOREK, M3D-C$^1$ and NIMROD developed the capability of modelling realistic 3D vertical displacement events (VDEs) including resistive walls. In this paper, a comprehensive 3D VDE benchmark is presented between these state of the art codes. The simulated case is based on an experimental NSTX plasma but with a simplified rectangular wall. In spite of pronounced differences between physics models and numerical methods, the comparison shows very good agreement in the relevant quantities used to characterize disruptions such as the 3D wall forces and energy decay. This benchmark does not only bring confidence regarding the use of the mentioned codes for disruption studies, but also shows differences with respect to the used models (e.g. reduced versus full MHD models). The simulations show important 3D features for a NSTX plasma such as the self-consistent evolution of the halo current and the origin of the wall forces. In contrast to other reduced MHD models based on an ordering in the aspect ratio, the ansatz based JOREK reduced MHD model allows capturing the 3D dynamics even in the spherical tokamak limit considered here.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
Axisymmetric simulations of vertical displacement events in tokamaks: A benchmark of M3D-C$^1$, NIMROD and JOREK
Authors:
I. Krebs,
F. J. Artola,
C. R. Sovinec,
S. C. Jardin,
K. J. Bunkers,
M. Hoelzl,
N. M. Ferraro
Abstract:
A benchmark exercise for the modeling of vertical displacement events (VDEs) is presented and applied to the 3D nonlinear magneto-hydrodynamic codes M3D-C$^1$, JOREK and NIMROD. The simulations are based on a vertically unstable NSTX equilibrium enclosed by an axisymmetric resistive wall with rectangular cross section. A linear dependence of the linear VDE growth rates on the resistivity of the wa…
▽ More
A benchmark exercise for the modeling of vertical displacement events (VDEs) is presented and applied to the 3D nonlinear magneto-hydrodynamic codes M3D-C$^1$, JOREK and NIMROD. The simulations are based on a vertically unstable NSTX equilibrium enclosed by an axisymmetric resistive wall with rectangular cross section. A linear dependence of the linear VDE growth rates on the resistivity of the wall is recovered for sufficiently large wall conductivity and small temperatures in the open field line region. The benchmark results show good agreement between the VDE growth rates obtained from linear NIMROD and M3D-C$^1$ simulations as well as from the linear phase of axisymmetric nonlinear JOREK, NIMROD and M3D-C$^1$ simulations. Axisymmetric nonlinear simulations of a full VDE performed with the three codes are compared and excellent agreement is found regarding plasma location and plasma currents as well as eddy and halo currents in the wall.
△ Less
Submitted 19 August, 2019; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Magnetic Reconnection with Asymmetry in the Outflow Direction
Authors:
N. A. Murphy,
C. R. Sovinec,
P. A. Cassak
Abstract:
Magnetic reconnection with asymmetry in the outflow direction occurs in the Earth's magnetotail, coronal mass ejections, flux cancellation events, astrophysical disks, spheromak merging experiments, and elsewhere in nature and the laboratory. A control volume analysis is performed for the case of steady antiparallel magnetic reconnection with asymmetric downstream pressure, which is used to deri…
▽ More
Magnetic reconnection with asymmetry in the outflow direction occurs in the Earth's magnetotail, coronal mass ejections, flux cancellation events, astrophysical disks, spheromak merging experiments, and elsewhere in nature and the laboratory. A control volume analysis is performed for the case of steady antiparallel magnetic reconnection with asymmetric downstream pressure, which is used to derive scaling relations for the outflow velocity from each side of the current sheet and the reconnection rate. Simple relationships for outflow velocity are presented for the incompressible case and the case of symmetric downstream pressure but asymmetric downstream density. Asymmetry alone is not found to greatly affect the reconnection rate. The flow stagnation point and magnetic field null do not coincide in a steady state unless the pressure gradient is negligible at the flow stagnation point.
△ Less
Submitted 22 December, 2009;
originally announced December 2009.
-
Rotational Stabilization of Magnetically Collimated Jets
Authors:
C. S. Carey,
C. R. Sovinec
Abstract:
We investigate the launching and stability of extragalactic jets through nonlinear magnetohydrodynamic (MHD) simulation and linear eigenmode analysis. In the simulations of jet evolution, a small-scale equilibrium magnetic arcade is twisted by a differentially rotating accretion disk. These simulations produce a collimated outflow which is unstable to the current driven m=1 kink mode for low rot…
▽ More
We investigate the launching and stability of extragalactic jets through nonlinear magnetohydrodynamic (MHD) simulation and linear eigenmode analysis. In the simulations of jet evolution, a small-scale equilibrium magnetic arcade is twisted by a differentially rotating accretion disk. These simulations produce a collimated outflow which is unstable to the current driven m=1 kink mode for low rotational velocities of the accretion disk relative to the Alfven speed of the coronal plasma. The growth rate of the kink mode in the jet is shown to be inversely related to the rotation rate of the disk, and the jet is stable for high rotation rates. Linear MHD calculations investigate the effect of rigid rotation on the kink mode in a cylindrical plasma. These calculations show that the Coriolis force distorts the m=1 kink eigenmode and stabilizes it at rotation frequencies such that the rotation period is longer than a few Alfven times.
△ Less
Submitted 17 June, 2009; v1 submitted 2 February, 2009;
originally announced February 2009.
-
$m=1$ Ideal Internal Kink Modes in a Line-tied Screw Pinch
Authors:
Yi-Min Huang,
Ellen G. Zweibel,
Carl R. Sovinec
Abstract:
It is well known that the radial displacement of the $m=1$ internal kink mode in a periodic screw pinch has a steep jump at the resonant surface where $\mathbf{k}\cdot\mathbf{B}=0$. In a line-tied system, relevant to solar and astrophysical plasmas, the resonant surface is no longer a valid concept. It is then of interest to see how line-tying alters the aforementioned result for a periodic syst…
▽ More
It is well known that the radial displacement of the $m=1$ internal kink mode in a periodic screw pinch has a steep jump at the resonant surface where $\mathbf{k}\cdot\mathbf{B}=0$. In a line-tied system, relevant to solar and astrophysical plasmas, the resonant surface is no longer a valid concept. It is then of interest to see how line-tying alters the aforementioned result for a periodic system. If the line-tied kink also produces a steep gradient, corresponding to a thin current layer, it may lead to strong resistive effects even with weak dissipation. Numerical solution of the eigenmode equations shows that the fastest growing kink mode in a line-tied system still possesses a jump in the radial displacement at the location coincident with the resonant surface of the fastest growing mode in the periodic counterpart. However, line-tying thickens the inner layer and slows down the growth rate. As the system length $L$ approaches infinity, both the inner layer thickness and the growth rate approach the periodic values. In the limit of small $ε\sim B_φ/B_{z}$, the critical length for instability $L_{c}\simε^{-3}$. The relative increase in the inner layer thickness due to line-tying scales as $ε^{-1}(L_{c}/L)^{2.5}$.
△ Less
Submitted 17 July, 2006;
originally announced July 2006.
