-
CHEOPS in-flight performance: A comprehensive look at the first 3.5 years of operations
Authors:
A. Fortier,
A. E. Simon,
C. Broeg,
G. Olofsson,
A. Deline,
T. G. Wilson,
P. F. L. Maxted,
A. Brandeker,
A. Collier Cameron,
M. Beck,
A. Bekkelien,
N. Billot,
A. Bonfanti,
G. Bruno,
J. Cabrera,
L. Delrez,
B. -O. Demory,
D. Futyan,
H. -G. Florén,
M. N. Günther,
A. Heitzmann,
S. Hoyer,
K. G. Isaak,
S. G. Sousa,
M. Stalport
, et al. (106 additional authors not shown)
Abstract:
CHEOPS is a space telescope specifically designed to monitor transiting exoplanets orbiting bright stars. In September 2023, CHEOPS completed its nominal mission and remains in excellent operational conditions. The mission has been extended until the end of 2026. Scientific and instrumental data have been collected throughout in-orbit commissioning and nominal operations, enabling a comprehensive…
▽ More
CHEOPS is a space telescope specifically designed to monitor transiting exoplanets orbiting bright stars. In September 2023, CHEOPS completed its nominal mission and remains in excellent operational conditions. The mission has been extended until the end of 2026. Scientific and instrumental data have been collected throughout in-orbit commissioning and nominal operations, enabling a comprehensive analysis of the mission's performance. In this article, we present the results of this analysis with a twofold goal. First, we aim to inform the scientific community about the present status of the mission and what can be expected as the instrument ages. Secondly, we intend for this publication to serve as a legacy document for future missions, providing insights and lessons learned from the successful operation of CHEOPS. To evaluate the instrument performance in flight, we developed a comprehensive monitoring and characterisation programme. It consists of dedicated observations that allow us to characterise the instrument's response. In addition to the standard collection of nominal science and housekee** data, these observations provide input for detecting, modelling, and correcting instrument systematics, discovering and addressing anomalies, and comparing the instrument's actual performance with expectations. The precision of the CHEOPS measurements has enabled the mission objectives to be met and exceeded. Careful modelling of the instrumental systematics allows the data quality to be significantly improved during the light curve analysis phase, resulting in more precise scientific measurements. CHEOPS is compliant with the driving scientific requirements of the mission. Although visible, the ageing of the instrument has not affected the mission's performance.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
The EBLM Project XI. Mass, radius and effective temperature measurements for 23 M-dwarf companions to solar-type stars observed with CHEOPS
Authors:
M. I. Swayne,
P. F. L. Maxted,
A. H. M. J. Triaud,
S. G. Sousa,
A. Deline,
D. Ehrenreich,
S. Hoyer,
G. Olofsson,
I. Boisse,
A. Duck,
S. Gill,
D. Martin,
J. McCormac,
C. M. Persson,
A. Santerne,
D. Sebastian,
M. R. Standing,
L. Acuña,
Y. Alibert,
R. Alonso,
G. Anglada,
T. Bárczy,
D. Barrado Navascues,
S. C. C. Barros,
W. Baumjohann
, et al. (82 additional authors not shown)
Abstract:
Observations of low-mass stars have frequently shown a disagreement between observed stellar radii and radii predicted by theoretical stellar structure models. This ``radius inflation'' problem could have an impact on both stellar and exoplanetary science. We present the final results of our observation programme with the CHEOPS satellite to obtain high-precision light curves of eclipsing binaries…
▽ More
Observations of low-mass stars have frequently shown a disagreement between observed stellar radii and radii predicted by theoretical stellar structure models. This ``radius inflation'' problem could have an impact on both stellar and exoplanetary science. We present the final results of our observation programme with the CHEOPS satellite to obtain high-precision light curves of eclipsing binaries with low mass stellar companions (EBLMs). Combined with the spectroscopic orbits of the solar-type companion, we can derive the masses, radii and effective temperatures of 23 M-dwarf stars. We use the PYCHEOPS data analysis software to analyse their primary and secondary occultations. For all but one target, we also perform analyses with TESS light curves for comparison. We have assessed the impact of starspot-induced variation on our derived parameters and account for this in our radius and effective temperature uncertainties using simulated light curves. We observe trends for inflation with both metallicity and orbital separation. We also observe a strong trend in the difference between theoretical and observational effective temperatures with metallicity. There is no such trend with orbital separation. These results are not consistent with the idea that observed inflation in stellar radius combines with lower effective temperature to preserve the luminosity predicted by low-mass stellar models. Our EBLM systems are high-quality and homogeneous measurements that can be used in further studies into radius inflation.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
INTEGRAL reloaded: spacecraft, instruments and ground system
Authors:
Erik Kuulkers,
Carlo Ferrigno,
Peter Kretschmar,
Julia Alfonso-Garzon,
Marius Baab,
Angela Bazzano,
Guillaume Belanger,
Ian Benson,
Anthony J. Bird,
Enrico Bozzo,
Soren Brandt,
Elliott Coe,
Isabel Caballero,
Floriane Cangemi,
Jerome Chenevez,
Bradley Cenko,
Nebil Cinar,
Alexis Coleiro,
Stefano De Padova,
Roland Diehl,
Claudia Dietze,
Albert Domingo,
Mark Drapes,
Eleonora D'uva,
Matthias Ehle
, et al. (63 additional authors not shown)
Abstract:
ESA's INTErnational Gamma-Ray Astrophysics Laboratory (INTEGRAL) was launched on 17 Oct 2002 at 06:41 CEST. Since then, it has been providing long, uninterrupted observations (up to about 47 hr, or 170 ksec, per satellite orbit of 2.7 days) with a large field-of-view (fully coded: 100 deg^2), msec time resolution, keV energy resolution, polarization measurements, as well as additional coverage in…
▽ More
ESA's INTErnational Gamma-Ray Astrophysics Laboratory (INTEGRAL) was launched on 17 Oct 2002 at 06:41 CEST. Since then, it has been providing long, uninterrupted observations (up to about 47 hr, or 170 ksec, per satellite orbit of 2.7 days) with a large field-of-view (fully coded: 100 deg^2), msec time resolution, keV energy resolution, polarization measurements, as well as additional coverage in the optical. This is realized by two main instruments in the 15 keV to 10 MeV range, the spectrometer SPI (spectral resolution 3 keV at 1.8 MeV) and the imager IBIS (angular resolution 12 arcmin FWHM), complemented by X-ray (JEM-X; 3-35 keV) and optical (OMC; Johnson V-band) monitors. All instruments are co-aligned to simultaneously observe the target region. A particle radiation monitor (IREM) measures charged particle fluxes near the spacecraft. The Anti-coincidence subsystems of the main instruments are also efficient all-sky gamma-ray detectors, which provide omni-directional monitoring above ~75 keV. INTEGRAL can also rapidly (within a couple of hours) re-point and conduct Target of Opportunity observations. INTEGRAL has build an impressive legacy: e.g. discovery of >600 new high-energy sources; first-ever direct detection of 56Ni and 56Co radio-active decay lines from a Type Ia supernova; new insights on positron annihilation in the Galactic bulge and disk; pioneering gamma-ray polarization studies. INTEGRAL is also a successful in multi-messenger astronomy: INTEGRAL found the first prompt electromagnetic radiation in coincidence with a binary neutron star merger. More than 1750 papers based on INTEGRAL data have been published in refereed journals. Here we give a comprehensive update of the satellite status after more than 18 years of operations in a harsh space environment, and an account of the successful Ground Segment.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Data-Driven Modelling of the Van Allen Belts: The 5DRBM Model for Trapped Electrons
Authors:
Lionel Métrailler,
Guillaume Bélanger,
Peter Kretschmar,
Erik Kuulkers,
Ricardo Pérez Martínez,
Jan-Uwe Ness,
Pedro Rodriguez,
Mauro Casale,
Jorge Fauste,
Timothy Finn,
Celia Sanchez,
Thomas Godard,
Richard Southworth
Abstract:
The magnetosphere sustained by the rotation of the Earth's liquid iron core traps charged particles, mostly electrons and protons, into structures referred to as the Van Allen belts. These radiation belts, in which the density of charged energetic particles can be very destructive for sensitive instrumentation, have to be crossed on every orbit of satellites traveling in elliptical orbits around t…
▽ More
The magnetosphere sustained by the rotation of the Earth's liquid iron core traps charged particles, mostly electrons and protons, into structures referred to as the Van Allen belts. These radiation belts, in which the density of charged energetic particles can be very destructive for sensitive instrumentation, have to be crossed on every orbit of satellites traveling in elliptical orbits around the Earth, as is the case for ESA's INTEGRAL and XMM-Newton missions. This paper presents the first working version of the 5DRBM-e model, a global, data-driven model of the radiation belts for trapped electrons. The model is based on in-situ measurements of electrons by the radiation monitors on board the INTEGRAL and XMM-Newton satellites along their long elliptical orbits for respectively 16 and 19 years of operations. This model, in its present form, features the integral flux for trapped electrons within energies ranging from 0.7 to 1.75 MeV. Cross-validation of the 5DRBM-e with the well-known AE8min/max and AE9mean models for a low eccentricity GPS orbit shows excellent agreement, and demonstrates that the new model can be used to provide reliable predictions along widely different orbits around Earth for the purpose of designing, planning, and operating satellites with more accurate instrument safety margins. Future work will include extending the model based on electrons of different energies and proton radiation measurement data.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Exploiting the nonlinear impact dynamics of a single-electron shuttle for highly regular current transport
Authors:
Michael J. Moeckel,
Darren R. Southworth,
Eva M. Weig,
Florian Marquardt
Abstract:
The nanomechanical single-electron shuttle is a resonant system in which a suspended metallic island oscillates between and impacts at two electrodes. This setup holds promise for one-by-one electron transport and the establishment of an absolute current standard. While the charge transported per oscillation by the nanoscale island will be quantized in the Coulomb blockade regime, the frequency of…
▽ More
The nanomechanical single-electron shuttle is a resonant system in which a suspended metallic island oscillates between and impacts at two electrodes. This setup holds promise for one-by-one electron transport and the establishment of an absolute current standard. While the charge transported per oscillation by the nanoscale island will be quantized in the Coulomb blockade regime, the frequency of such a shuttle depends sensitively on many parameters, leading to drift and noise. Instead of considering the nonlinearities introduced by the impact events as a nuisance, here we propose to exploit the resulting nonlinear dynamics to realize a highly precise oscillation frequency via synchronization of the shuttle self-oscillations to an external signal.
△ Less
Submitted 20 February, 2013;
originally announced February 2013.
-
High-Q Nanomechanics via Destructive Interference of Elastic Waves
Authors:
I. Wilson-Rae,
R. A. Barton,
S. S. Verbridge,
D. R. Southworth,
B. Ilic,
H. G. Craighead,
J. M. Parpia
Abstract:
Mechanical dissipation poses an ubiquitous challenge to the performance of nanomechanical devices. Here we analyze the support-induced dissipation of high-stress nanomechanical resonators. We develop a model for this loss mechanism and test it on silicon nitride membranes with circular and square geometries. The measured Q-values of different harmonics present a non-monotonic behavior which is suc…
▽ More
Mechanical dissipation poses an ubiquitous challenge to the performance of nanomechanical devices. Here we analyze the support-induced dissipation of high-stress nanomechanical resonators. We develop a model for this loss mechanism and test it on silicon nitride membranes with circular and square geometries. The measured Q-values of different harmonics present a non-monotonic behavior which is successfully explained. For azimuthal harmonics of the circular geometry we predict that destructive interference of the radiated waves leads to an exponential suppression of the clam** loss in the harmonic index. Our model can also be applied to graphene drums under high tension.
△ Less
Submitted 11 October, 2010;
originally announced October 2010.