-
Complex flow profiles in microscopic active crystals
Authors:
Abraham Mauleon-Amieva,
Tanniemola B. Liverpool,
Ian Williams,
Anton Souslov,
C. Patrick Royall
Abstract:
Active solids emerge from self-actuating components interacting with each other to form crystalline patterns. In equilibrium, commensurability underpins our understanding of nanoscale friction and particle-level dynamics of crystals. However, these concepts have yet to be imported into the realm of active matter. Here, we develop an experimental platform and a theoretical description for microscop…
▽ More
Active solids emerge from self-actuating components interacting with each other to form crystalline patterns. In equilibrium, commensurability underpins our understanding of nanoscale friction and particle-level dynamics of crystals. However, these concepts have yet to be imported into the realm of active matter. Here, we develop an experimental platform and a theoretical description for microscopic clusters composed of active particles confined and self-assembled into small crystals. In our experiments, these crystallites form upon circular confinement of active rollers, with a magic number of 61 rollers per well. Competition between solidity and self propulsion leads to self shearing and complex flow inversion behaviour, along with self sliding states and activity induced melting. We discover active stick slip dynamics, which periodically switch between a commensurate static state and an incommensurate self-sliding state characterised by a train of localised defects. We describe the steady state behaviour using a discretised model of active hydrodynamics. We then quantify the intermittent stick slip dynamics using a self-propelled extension of the Frenkel Kontorova (FK) model, a fundamental workhorse of slip** and flow in crystals. Our findings in a colloidal model system point to a wealth of phenomena in incommensurate active solids as design principles for both assembly and robotics down to the nanoscale.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Single-shot measurement of photonic topological invariant
Authors:
Nathan Roberts,
Guido Baardink,
Anton Souslov,
Peter J. Mosley
Abstract:
Topological design enables robustness to be engineered into a system. However, a general challenge remains to experimentally characterize topological properties. In this work, we demonstrate a technique for directly observing a winding-number invariant using a single measurement. By propagating light with a sufficiently broad spectrum along a topological photonic crystal fiber, we calculate the wi…
▽ More
Topological design enables robustness to be engineered into a system. However, a general challenge remains to experimentally characterize topological properties. In this work, we demonstrate a technique for directly observing a winding-number invariant using a single measurement. By propagating light with a sufficiently broad spectrum along a topological photonic crystal fiber, we calculate the winding number invariant from the output intensity pattern. We quantify the capabilities of this single-shot method, which works even for surprisingly narrow and asymmetric spectral distributions. We demonstrate our approach using topological fiber, but our method is generalizable to other platforms. Our method is experimentally straightforward: we use only a broadband input excitation and a single output to measure the topological invariant.
△ Less
Submitted 16 April, 2024; v1 submitted 5 May, 2023;
originally announced May 2023.
-
Topological edge states in equidistant arrays of Lithium Niobate nano-waveguides
Authors:
Andrey V. Gorbach,
Jesper Beer,
Anton Souslov
Abstract:
We report that equidistant 1D arrays of thin-film Lithium Niobate nano-waveguides generically support topological edge states. Unlike conventional coupled-waveguide topological systems, the topological properties of these arrays are dictated by the interplay between intra- and inter-modal couplings of two families of guided modes with different parities. Exploiting two modes within the same wavegu…
▽ More
We report that equidistant 1D arrays of thin-film Lithium Niobate nano-waveguides generically support topological edge states. Unlike conventional coupled-waveguide topological systems, the topological properties of these arrays are dictated by the interplay between intra- and inter-modal couplings of two families of guided modes with different parities. Exploiting two modes within the same waveguide to design a topological invariant allows us to decrease the system size by a factor of two and substantially simplify the structure. We present two example geometries where topological edge states of different types (based on either quasi-TE or quasi-TM modes) can be observed within a wide range of wavelengths and array spacings.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Odd Cosserat elasticity in active materials
Authors:
Piotr Surówka,
Anton Souslov,
Frank Jülicher,
Debarghya Banerjee
Abstract:
Stress-strain constitutive relations in solids with an internal angular degree of freedom can be modelled using Cosserat (also called micropolar) elasticity. In this paper, we explore the phenomenology for a natural extension of Cosserat materials that includes chiral active components and odd elasticity. We calculate static elastic properties of such a solid, where we show that static response to…
▽ More
Stress-strain constitutive relations in solids with an internal angular degree of freedom can be modelled using Cosserat (also called micropolar) elasticity. In this paper, we explore the phenomenology for a natural extension of Cosserat materials that includes chiral active components and odd elasticity. We calculate static elastic properties of such a solid, where we show that static response to rotational stresses leads to strains that depend on both Cosserat and odd elasticity. We then compute the dispersion of linear solutions in these odd Cosserat materials in the overdamped regime and find the presence of \emph{exceptional points} in the dispersion relation. We discover that these exceptional points create a sharp boundary between a Cosserat-dominated regime of complete wave attenuation and an odd-elasticity-dominated regime of propagating waves. We conclude by showing the effect of Cosserat and odd elastic terms on the polarization of Rayleigh surface waves.
△ Less
Submitted 13 January, 2023; v1 submitted 24 October, 2022;
originally announced October 2022.
-
Modeling Leidenfrost levitation of soft elastic solids
Authors:
Jack Binysh,
Indrajit Chakraborty,
Mykyta V. Chubynsky,
Vicente Luis Diaz Melian,
Scott R. Waitukaitis,
James E. Sprittles,
Anton Souslov
Abstract:
The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored interplay between thermodynamics, elasticity, and lubrication: despite being observed, its basic theoretical description remains a challenge. Here, we provide a the…
▽ More
The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored interplay between thermodynamics, elasticity, and lubrication: despite being observed, its basic theoretical description remains a challenge. Here, we provide a theory of elastic Leidenfrost floating. As weight increases, a rigid solid sits closer to the hot surface. By contrast, we discover an elasticity-dominated regime where the heavier the solid, the higher it floats. This geometry-governed behavior is reminiscent of the dynamics of large liquid Leidenfrost drops. We show that this elastic regime is characterized by Hertzian behavior of the solid's underbelly and derive how the float height scales with materials parameters. Introducing a dimensionless elastic Leidenfrost number, we capture the crossover between rigid and Hertzian behavior. Our results provide theoretical underpinning for recent experiments, and point to the design of novel soft machines.
△ Less
Submitted 11 September, 2023; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Scalable 3D printing for topological mechanical metamaterials
Authors:
Achilles Bergne,
Guido Baardink,
Evripides G Loukaides,
Anton Souslov
Abstract:
Mechanical metamaterials are structures designed to exhibit an exotic response, such as topological soft modes at a surface. Here we explore single-material 3D prints of these topological structures by translating a ball-and-spring model into a physical prototype. By uniaxially compressing the 3D-printed solid having marginal rigidity, we observe that the surfaces are consistently softer than the…
▽ More
Mechanical metamaterials are structures designed to exhibit an exotic response, such as topological soft modes at a surface. Here we explore single-material 3D prints of these topological structures by translating a ball-and-spring model into a physical prototype. By uniaxially compressing the 3D-printed solid having marginal rigidity, we observe that the surfaces are consistently softer than the bulk. However, we also find that either of two opposite surfaces can be the softest, in contrast to the topologically robust predictions of the linear model. Finite-element simulations allow us to bridge this gap. We explore how the printing geometry and deformation amplitude could affect surface softness. For small strains, we find qualitative agreement with the ball-and-spring model but, surprisingly, nonlinear deformations can select which side is softest. Our work contextualizes the predictions of topological mechanics for real 3D materials and their potential for cushioning applications.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
Nonlinear shallow-water waves with vertical odd viscosity
Authors:
Alex Doak,
Guido Baardink,
Paul A Milewski,
Anton Souslov
Abstract:
The breaking of detailed balance in fluids through Coriolis forces or odd-viscous stresses has profound effects on the dynamics of surface waves. Here we explore both weakly and strongly non-linear waves in a three-dimensional fluid with vertical odd viscosity. Our model describes the free surface of a shallow fluid composed of nearly vertical vortex filaments, which all stand perpendicular to the…
▽ More
The breaking of detailed balance in fluids through Coriolis forces or odd-viscous stresses has profound effects on the dynamics of surface waves. Here we explore both weakly and strongly non-linear waves in a three-dimensional fluid with vertical odd viscosity. Our model describes the free surface of a shallow fluid composed of nearly vertical vortex filaments, which all stand perpendicular to the surface. We find that the odd viscosity in this configuration induces previously unexplored non-linear effects in shallow-water waves, arising from both stresses on the surface and stress gradients in the bulk. By assuming weak nonlinearity, we find reduced equations including Korteweg-de Vries (KdV), Ostrovsky, and Kadomtsev-Petviashvilli (KP) equations with modified coefficients. At sufficiently large odd viscosity, the dispersion changes sign, allowing for compact two-dimensional solitary waves. We show that odd viscosity and surface tension have the same effect on the free surface, but distinct signatures in the fluid flow. Our results describe the collective dynamics of many-vortex systems, which can also occur in oceanic and atmospheric geophysics.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Topological supermodes in photonic crystal fiber
Authors:
Nathan Roberts,
Guido Baardink,
Josh Nunn,
Peter J. Mosley,
Anton Souslov
Abstract:
Topological states enable robust transport within disorder-rich media through integer invariants inextricably tied to the transmission of light, sound, or electrons. However, the challenge remains to exploit topological protection in a length-scalable platform such as optical fibre. We demonstrate, through both modelling and experiment, optical fibre that hosts topological supermodes across multip…
▽ More
Topological states enable robust transport within disorder-rich media through integer invariants inextricably tied to the transmission of light, sound, or electrons. However, the challenge remains to exploit topological protection in a length-scalable platform such as optical fibre. We demonstrate, through both modelling and experiment, optical fibre that hosts topological supermodes across multiple light-guiding cores. We directly measure the photonic winding-number invariant characterising the bulk and observe topological guidance of visible light over metre length scales. Furthermore, the mechanical flexibility of fibre allows us to reversibly reconfigure the topological state. As the fibre is bent, we find that the edge states first lose their localization and then become relocalised due to disorder. We envision fibre as a scalable platform to explore and exploit topological effects in photonic networks.
△ Less
Submitted 2 February, 2023; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Optimal power and efficiency of odd engines
Authors:
Étienne Fodor,
Anton Souslov
Abstract:
Odd materials feature antisymmetric response to perturbations. This anomalous property can stem from the nonequilibrium activity of their components, which is sustained by an external energy supply. These materials open the door to designing innovative engines which extract work by applying cyclic deformations, without any equivalent in equilibrium. Here, we reveal that the efficiency of such ener…
▽ More
Odd materials feature antisymmetric response to perturbations. This anomalous property can stem from the nonequilibrium activity of their components, which is sustained by an external energy supply. These materials open the door to designing innovative engines which extract work by applying cyclic deformations, without any equivalent in equilibrium. Here, we reveal that the efficiency of such energy conversion, from local activity to macroscopic work, can be arbitrarily close to unity when the cycles of deformation are properly designed. We illustrate these principles in some canonical viscoelastic materials, which leads us to identify strategies for optimizing power and efficiency according to material properties, and to delineate guidelines for the design of more complex odd engines.
△ Less
Submitted 30 December, 2021; v1 submitted 22 September, 2021;
originally announced September 2021.
-
Mechanical properties of acoustically levitated granular rafts
Authors:
Melody X. Lim,
Bryan VanSaders,
Anton Souslov,
Heinrich M. Jaeger
Abstract:
We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochasti…
▽ More
We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochastic forces and torques that impart angular momentum to levitated objects. As the angular momentum of a quasi-two-dimensional granular raft is increased, the raft deforms from a disk to an ellipse, eventually pinching off into multiple separate rafts, in a mechanism that resembles the break-up of a liquid drop. We extract the raft effective surface tension and elastic modulus, and show that non-pairwise acoustic forces give rise to effective elastic moduli that scale with the raft size. We also show that the raft size controls the microstructural basis of plastic deformation, resulting in a transition from fracture to ductile failure.
△ Less
Submitted 10 March, 2022; v1 submitted 17 June, 2021;
originally announced June 2021.
-
Active elastocapillarity in soft solids with negative surface tension
Authors:
Jack Binysh,
Thomas R. Wilks,
Anton Souslov
Abstract:
Active solids consume energy to allow for actuation, shape change, and wave propagation not possible in equilibrium. Whereas active interfaces have been realized across many experimental systems, control of three-dimensional (3D) bulk materials remains a challenge. Here, we develop continuum theory and microscopic simulations that describe a 3D soft solid whose boundary experiences active surface…
▽ More
Active solids consume energy to allow for actuation, shape change, and wave propagation not possible in equilibrium. Whereas active interfaces have been realized across many experimental systems, control of three-dimensional (3D) bulk materials remains a challenge. Here, we develop continuum theory and microscopic simulations that describe a 3D soft solid whose boundary experiences active surface stresses. The competition between active boundary and elastic bulk yields a broad range of previously unexplored phenomena, which are demonstrations of so-called active elastocapillarity. In contrast to thin shells and vesicles, we discover that bulk 3D elasticity controls snap-through transitions between different anisotropic shapes. These transitions meet at a critical point, allowing a universal classification via Landau theory. The active surface modifies elastic wave propagation to allow zero, or even negative, group velocities. These phenomena offer robust principles for programming shape change and functionality into active solids, from robotic metamaterials down to shape-shifting nanoparticles.
△ Less
Submitted 5 July, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Oscillatory chiral flows in confined active fluids with obstacles
Authors:
Bo Zhang,
Benjamin Hilton,
Christopher Short,
Anton Souslov,
Alexey Snezhko
Abstract:
An active colloidal fluid comprised of self-propelled spinning particles injecting energy and angular momentum at the microscale demonstrates spontaneous collective states that range from flocks to coherent vortices. Despite their seeming simplicity, the emergent far-from-equilibrium behavior of these fluids remains poorly understood, presenting a challenge to the design and control of next-genera…
▽ More
An active colloidal fluid comprised of self-propelled spinning particles injecting energy and angular momentum at the microscale demonstrates spontaneous collective states that range from flocks to coherent vortices. Despite their seeming simplicity, the emergent far-from-equilibrium behavior of these fluids remains poorly understood, presenting a challenge to the design and control of next-generation active materials. When confined in a ring, such so-called polar active fluids acquire chirality once the spontaneous flow chooses a direction. In a perfect ring, this chirality is indefinitely long-lived. Here, we combine experiments on self-propelled colloidal Quincke rollers and mesoscopic simulations of continuum Toner-Tu equations to explore how such chiral states can be controlled and manipulated by obstacles. For different obstacle geometries three dynamic steady states have been realized: long-lived chiral flow, an apolar state in which the flow breaks up into counter-rotating vortices and an unconventional collective state with flow having an oscillating chirality. The chirality reversal proceeds through the formation of intermittent vortex chains in the vicinity of an obstacle. We demonstrate that the frequency of collective states with oscillating chirality can be tuned by obstacle parameters. We vary obstacle shapes to design chiral states that are independent of initial conditions. Building on our findings, we realize a system with two triangular obstacles that force the active fluid towards a state with a density imbalance of active particles across the ring. Our results demonstrate how spontaneous polar active flows in combination with size and geometry of scatterers can be used to control dynamic patterns of polar active liquids for materials design.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Complete absorption of topologically protected waves
Authors:
Guido Baardink,
Gino Cassella,
Luke Neville,
Paul A. Milewski,
Anton Souslov
Abstract:
Chiral edge states can transmit energy along imperfect interfaces in a topologically robust and unidirectional manner when protected by bulk-boundary correspondence. However, in continuum systems, the number of states at an interface can depend on boundary conditions. Here we design interfaces that host a net flux of the number of modes into a region, trap** incoming energy. As a realization, we…
▽ More
Chiral edge states can transmit energy along imperfect interfaces in a topologically robust and unidirectional manner when protected by bulk-boundary correspondence. However, in continuum systems, the number of states at an interface can depend on boundary conditions. Here we design interfaces that host a net flux of the number of modes into a region, trap** incoming energy. As a realization, we present a model system of two topological fluids composed of counter-spinning particles, which are separated by a boundary that transitions from a fluid-fluid interface into a no-slip wall. In these fluids, chiral edge states disappear, which implies non-Hermiticity and leads to a novel interplay between topology and energy dissipation. Solving the fluid equations of motion, we find explicit expressions for the disappearing modes. We then conclude that energy dissipation is sped up by mode trap**. Instead of making efficient waveguides, our work shows how topology can be exploited for applications towards acoustic absorption, shielding, and soundproofing.
△ Less
Submitted 3 June, 2021; v1 submitted 14 October, 2020;
originally announced October 2020.
-
Topological active matter
Authors:
Suraj Shankar,
Anton Souslov,
Mark J. Bowick,
M. Cristina Marchetti,
Vincenzo Vitelli
Abstract:
Active matter encompasses different nonequilibrium systems in which individual constituents convert energy into non-conservative forces or motion at the microscale. This review provides an elementary introduction to the role of topology in active matter through experimentally relevant examples. Here, the focus lies on topological defects and topologically protected edge modes with an emphasis on t…
▽ More
Active matter encompasses different nonequilibrium systems in which individual constituents convert energy into non-conservative forces or motion at the microscale. This review provides an elementary introduction to the role of topology in active matter through experimentally relevant examples. Here, the focus lies on topological defects and topologically protected edge modes with an emphasis on the distinctive properties they acquire in active media. These paradigmatic examples represent two physically distinct classes of phenomena whose robustness can be traced to a common mathematical origin: the presence of topological invariants. These invariants are typically integer numbers that cannot be changed by continuous deformations of the relevant order parameters or physical parameters of the underlying medium. We first explain the mechanisms whereby topological defects self propel and proliferate in active nematics, leading to collective states which can be manipulated by geometry and patterning. Possible implications for active microfluidics and biological tissues are presented. We then illustrate how the propagation of waves in active fluids and solids is affected by the presence of topological invariants characterizing their dispersion relations. We discuss the relevance of these ideas for the design of robotic metamaterials and the properties of active granular and colloidal systems. Open theoretical and experimental challenges are presented as future research prospects.
△ Less
Submitted 19 July, 2021; v1 submitted 1 October, 2020;
originally announced October 2020.
-
Soft topological modes protected by symmetry in rigid mechanical metamaterials
Authors:
Hridesh Kedia,
Anton Souslov,
D. Zeb Rocklin
Abstract:
Topological mechanics can realize soft modes in mechanical metamaterials in which the number of degrees of freedom for particle motion is finely balanced by the constraints provided by interparticle interactions. However, solid objects are generally hyperstatic (or overconstrained). Here, we show how symmetries may be applied to generate topological soft modes even in overconstrained, rigid system…
▽ More
Topological mechanics can realize soft modes in mechanical metamaterials in which the number of degrees of freedom for particle motion is finely balanced by the constraints provided by interparticle interactions. However, solid objects are generally hyperstatic (or overconstrained). Here, we show how symmetries may be applied to generate topological soft modes even in overconstrained, rigid systems. To do so, we consider non-Hermitian topology based on non-square matrices, and design a hyperstatic material in which low-energy modes protected by topology and symmetry appear at interfaces. Our approach presents a novel way of generating softness in robust scale-free architectures suitable for miniaturization to the nanoscale.
△ Less
Submitted 23 February, 2021; v1 submitted 4 August, 2020;
originally announced August 2020.
-
Hydrodynamic correlation functions of chiral active fluids
Authors:
Debarghya Banerjee,
Anton Souslov,
Vincenzo Vitelli
Abstract:
The success of spectroscopy to characterise equilibrium fluids, for example the heat capacity ratio, suggests a parallel approach for active fluids. Here, we start from a hydrodynamic description of chiral active fluids composed of spinning constituents and derive their low-frequency, long-wavelength response functions using the Kadanoff-Martin formalism. We find that the presence of odd (equivale…
▽ More
The success of spectroscopy to characterise equilibrium fluids, for example the heat capacity ratio, suggests a parallel approach for active fluids. Here, we start from a hydrodynamic description of chiral active fluids composed of spinning constituents and derive their low-frequency, long-wavelength response functions using the Kadanoff-Martin formalism. We find that the presence of odd (equivalently, Hall) viscosity leads to mixed density-vorticity response even at linear order. Such response, prohibited in time-reversal-invariant fluids, is a large-scale manifestation of the microscopic breaking of time-reversal symmetry. Our work suggests possible experimental probes that can measure anomalous transport coefficients in active fluids through dynamic light scattering.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
-
Anisotropic polymer nanoparticles with controlled dimensions from the morphological transformation of isotropic seeds
Authors:
Zan Hua,
Joseph R Jones,
Marjolaine Thomas,
Maria C Arno,
Anton Souslov,
Thomas R Wilks,
Rachel K O'Reilly
Abstract:
Understanding and controlling self-assembly processes at multiple length scales is vital if we are to design and create advanced materials. In particular, our ability to organise matter on the nanoscale has advanced considerably, but still lags far behind our skill in manipulating individual molecules. New tools allowing controlled nanoscale assembly are sorely needed, as well as the physical unde…
▽ More
Understanding and controlling self-assembly processes at multiple length scales is vital if we are to design and create advanced materials. In particular, our ability to organise matter on the nanoscale has advanced considerably, but still lags far behind our skill in manipulating individual molecules. New tools allowing controlled nanoscale assembly are sorely needed, as well as the physical understanding of how they work. Here, we report a new method for the production of highly anisotropic nanoparticles with controlled dimensions based on a morphological transformation process (MORPH for short) driven by the formation of supramolecular bonds. We present a minimal physical model for MORPH which suggests it will be generalisable to a large number of polymer/nanoparticle systems. We envision MORPH becoming a valuable tool for controlling nanoscale self-assembly, and for the production of functional nanostructures for diverse applications.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
Anisotropic odd viscosity via time-modulated drive
Authors:
Anton Souslov,
Andrey Gromov,
Vincenzo Vitelli
Abstract:
At equilibrium, the structure and response of ordered phases are typically determined by the spontaneous breaking of spatial symmetries. Out of equilibrium, spatial order itself can become a dynamically emergent concept. In this article, we show that spatially anisotropic viscous coefficients and stresses can be designed in a far-from-equilibrium fluid by applying to its constituents a time-modula…
▽ More
At equilibrium, the structure and response of ordered phases are typically determined by the spontaneous breaking of spatial symmetries. Out of equilibrium, spatial order itself can become a dynamically emergent concept. In this article, we show that spatially anisotropic viscous coefficients and stresses can be designed in a far-from-equilibrium fluid by applying to its constituents a time-modulated drive. If the drive induces a rotation whose rate is slowed down when the constituents point along specific directions, anisotropic structures and mechanical responses arise at long timescales. We demonstrate that the viscous response of such anisotropic driven fluids can acquire a tensorial, dissipationless component called anisotropic odd (or Hall) viscosity. Classical fluids with internal torques can display additional components of the odd viscosity neglected in previous studies of quantum Hall fluids that assumed angular momentum conservation. We show that these anisotropic and angular momentum-violating odd-viscosity coefficients can change even the bulk flow of an incompressible fluid by acting as a source of vorticity. In addition, shear distortions in the shape of an inclusion result in torques.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Odd elasticity
Authors:
Colin Scheibner,
Anton Souslov,
Debarghya Banerjee,
Piotr Surowka,
William T. M. Irvine,
Vincenzo Vitelli
Abstract:
Hooke's law states that the forces or stresses experienced by an elastic object are proportional to the applied deformations or strains. The number of coefficients of proportionality between stress and strain, i.e., the elastic moduli, is constrained by energy conservation. In this Letter, we lift this restriction and generalize linear elasticity to active media with non-conservative microscopic i…
▽ More
Hooke's law states that the forces or stresses experienced by an elastic object are proportional to the applied deformations or strains. The number of coefficients of proportionality between stress and strain, i.e., the elastic moduli, is constrained by energy conservation. In this Letter, we lift this restriction and generalize linear elasticity to active media with non-conservative microscopic interactions that violate mechanical reciprocity. This generalized framework, which we dub odd elasticity, reveals that two additional moduli can exist in a two-dimensional isotropic solid with active bonds. Such an odd-elastic solid can be regarded as a distributed engine: work is locally extracted, or injected, during quasi-static cycles of deformation. Using continuum equations, coarse-grained microscopic models, and numerical simulations, we uncover phenomena ranging from activity-induced auxetic behavior to wave propagation powered by self-sustained active elastic cycles. Besides providing insights beyond existing hydrodynamic theories of active solids, odd elasticity suggests design principles for emergent autonomous materials.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Cluster formation via sonic depletion forces in levitated granular matter
Authors:
Melody X. Lim,
Anton Souslov,
Vincenzo Vitelli,
Heinrich M. Jaeger
Abstract:
The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a…
▽ More
The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a platform to experimentally probe the formation of nonequilibrium small structures in a controlled environment. We focus on the minimal models of cluster formation: six and seven millimetre-scale particles in two dimensions. Experiments and modelling reveal that, in contrast to thermal colloids, in non-equilibrium granular ensembles the magnitude of active fluctuations controls not only the assembly rates but also their assembly pathways and ground-state statistics. These results open up new possibilities for non-invasively manipulating macroscopic particles, tuning their interactions, and directing their assembly.
△ Less
Submitted 11 August, 2018;
originally announced August 2018.
-
Extreme thermodynamics with polymer gel tori: harnessing thermodynamic instabilities to induce large-scale deformations
Authors:
Ya-Wen Chang,
Michael S. Dimitriyev,
Anton Souslov,
Svetoslav V. Nikolov,
Samantha M. Marquez,
Alexander Alexeev,
Paul M. Goldbart,
Alberto Fernandez-Nieves
Abstract:
When a swollen, thermoresponsive polymer gel is heated in a solvent bath, it expels solvent and deswells. When this heating is slow, deswelling proceeds homogeneously, as observed in a toroid-shaped gel that changes volume whilst maintaining its toroidal shape. By contrast, if the gel is heated quickly, an impermeable layer of collapsed polymer forms and traps solvent within the gel, arresting the…
▽ More
When a swollen, thermoresponsive polymer gel is heated in a solvent bath, it expels solvent and deswells. When this heating is slow, deswelling proceeds homogeneously, as observed in a toroid-shaped gel that changes volume whilst maintaining its toroidal shape. By contrast, if the gel is heated quickly, an impermeable layer of collapsed polymer forms and traps solvent within the gel, arresting the volume change. The ensuing evolution of the gel then happens at fixed volume, leading to phase-separation and the development of inhomogeneous stress that deforms the toroidal shape. We observe that this stress can cause the torus to buckle out of the plane, via a mechanism analogous to the bending of bimetallic strips upon heating. Our results demonstrate that thermodynamic instabilities, i.e., phase transitions, can be used to actuate mechanical deformation in an extreme thermodynamics of materials.
△ Less
Submitted 28 June, 2018;
originally announced June 2018.
-
Topological protection can arise from thermal fluctuations and interactions
Authors:
Ricardo Pablo Pedro,
Jayson Paulose,
Anton Souslov,
Mildred Dresselhaus,
Vincenzo Vitelli
Abstract:
Topological quantum and classical materials can exhibit robust properties that are protected against disorder, for example for noninteracting particles and linear waves. Here, we demonstrate how to construct topologically protected states that arise from the combination of strong interactions and thermal fluctuations inherent to soft materials or miniaturized mechanical structures. Specifically, w…
▽ More
Topological quantum and classical materials can exhibit robust properties that are protected against disorder, for example for noninteracting particles and linear waves. Here, we demonstrate how to construct topologically protected states that arise from the combination of strong interactions and thermal fluctuations inherent to soft materials or miniaturized mechanical structures. Specifically, we consider fluctuating lines under tension (e.g., polymer or vortex lines), subject to a class of spatially modulated substrate potentials. At equilibrium, the lines acquire a collective tilt proportional to an integer topological invariant called the Chern number. This quantized tilt is robust against substrate disorder, as verified by classical Langevin dynamics simulations. This robustness arises because excitations in this system of thermally fluctuating lines are gapped by virtue of inter-line interactions. We establish the topological underpinning of this pattern via a map** that we develop between the interacting-lines system and a hitherto unexplored generalization of Thouless pum** to imaginary time. Our work points to a new class of classical topological phenomena in which the topological signature manifests itself in a structural property observed at finite temperature rather than a transport measurement.
△ Less
Submitted 26 October, 2018; v1 submitted 13 March, 2018;
originally announced March 2018.
-
Topological waves in fluids with odd viscosity
Authors:
Anton Souslov,
Kinjal Dasbiswas,
Michel Fruchart,
Suriyanarayanan Vaikuntanathan,
Vincenzo Vitelli
Abstract:
Fluids in which both time-reversal and parity are broken can display a dissipationless viscosity that is odd under each of these symmetries. Here, we show how this odd viscosity has a dramatic effect on topological sound waves in fluids, including the number and spatial profile of topological edge modes. Odd viscosity provides a short-distance cutoff that allows us to define a bulk topological inv…
▽ More
Fluids in which both time-reversal and parity are broken can display a dissipationless viscosity that is odd under each of these symmetries. Here, we show how this odd viscosity has a dramatic effect on topological sound waves in fluids, including the number and spatial profile of topological edge modes. Odd viscosity provides a short-distance cutoff that allows us to define a bulk topological invariant on a compact momentum space. As the sign of odd viscosity changes, a topological phase transition occurs without closing the bulk gap. Instead, at the transition point, the topological invariant becomes ill-defined because momentum space cannot be compactified. This mechanism is unique to continuum models and can describe fluids ranging from electronic to chiral active systems.
△ Less
Submitted 27 May, 2019; v1 submitted 26 February, 2018;
originally announced February 2018.
-
Flocking from a quantum analogy: Spin-orbit coupling in an active fluid
Authors:
Benjamin Loewe,
Anton Souslov,
Paul M. Goldbart
Abstract:
Systems composed of strongly interacting self-propelled particles can form a spontaneously flowing polar active fluid. The study of the connection between the microscopic dynamics of a single such particle and the macroscopic dynamics of the fluid can yield insights into experimentally realizable active flows, but this connection is well understood in only a few select cases. We introduce a model…
▽ More
Systems composed of strongly interacting self-propelled particles can form a spontaneously flowing polar active fluid. The study of the connection between the microscopic dynamics of a single such particle and the macroscopic dynamics of the fluid can yield insights into experimentally realizable active flows, but this connection is well understood in only a few select cases. We introduce a model of self-propelled particles based on an analogy with the motion of electrons that have strong spin-orbit coupling. We find that, within our model, self-propelled particles are subject to an analog of the Heisenberg uncertainty principle that relates translational and rotational noise. Furthermore, by coarse-graining this microscopic model, we establish expressions for the coefficients of the Toner-Tu equations---the hydrodynamic equations that describe an active fluid composed of these "active spins." The connection between self-propelled particles and quantum spins may help realize exotic phases of matter using active fluids via analogies with systems composed of strongly correlated electrons.
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
-
Localizing softness and stress along loops in three-dimensional topological metamaterials
Authors:
Guido Baardink,
Anton Souslov,
Jayson Paulose,
Vincenzo Vitelli
Abstract:
Topological states can be used to control the mechanical properties of a material along an edge or around a localized defect. The surface rigidity of elastic networks is characterized by a bulk topological invariant called the polarization; materials with a well-defined uniform polarization display a dramatic range of edge softnesses depending on the orientation of the polarization relative to the…
▽ More
Topological states can be used to control the mechanical properties of a material along an edge or around a localized defect. The surface rigidity of elastic networks is characterized by a bulk topological invariant called the polarization; materials with a well-defined uniform polarization display a dramatic range of edge softnesses depending on the orientation of the polarization relative to the terminating surface. However, in all three-dimensional mechanical metamaterials proposed to date, the topological edge modes are mixed with bulk soft modes and so-called Weyl loops. Here, we report the design of a gapped 3D topological metamaterial with a uniform polarization that displays a corresponding asymmetry between the number of soft modes on opposing surfaces and, in addition, no bulk soft modes. We then use this construction to localize topological soft modes in interior regions of the material by including defect structures---dislocation loops---that are unique to three dimensions. We derive a general formula that relates the difference in the number of soft modes and states of self-stress localized along the dislocation loop to the handedness of the vector triad formed by the lattice polarization, Burgers vector, and dislocation-line direction. Our findings suggest a novel strategy for pre-programming failure and softness localized along lines in 3D, while avoiding extended periodic failure modes associated with Weyl loops.
△ Less
Submitted 4 August, 2017; v1 submitted 27 July, 2017;
originally announced July 2017.
-
Coupling the Leidenfrost Effect and Elastic Deformations to Power Sustained Bouncing
Authors:
Scott R. Waitukaitis,
Antal Zuiderwijk,
Anton Souslov,
Corentin Coulais,
Martin van Hecke
Abstract:
The Leidenfrost effect occurs when an object near a hot surface vaporizes rapidly enough to lift itself up and hover. Although well-understood for liquids and stiff sublimable solids, nothing is known about the effect with materials whose stiffness lies between these extremes. Here we introduce a new phenomenon that occurs with vaporizable soft solids: the elastic Leidenfrost effect. By drop** h…
▽ More
The Leidenfrost effect occurs when an object near a hot surface vaporizes rapidly enough to lift itself up and hover. Although well-understood for liquids and stiff sublimable solids, nothing is known about the effect with materials whose stiffness lies between these extremes. Here we introduce a new phenomenon that occurs with vaporizable soft solids: the elastic Leidenfrost effect. By drop** hydrogel spheres onto hot surfaces we find that, rather than hovering, they energetically bounce several times their diameter for minutes at a time. With high-speed video during a single impact, we uncover high-frequency microscopic gap dynamics at the sphere-substrate interface. We show how these otherwise-hidden agitations constitute work cycles that harvest mechanical energy from the vapour and sustain the bouncing. Our findings unleash a powerful and widely applicable strategy for injecting mechanical energy into soft materials, with relevance to fields ranging from soft robotics and metamaterials to microfluidics and active matter.
△ Less
Submitted 9 May, 2017;
originally announced May 2017.
-
Odd viscosity in chiral active fluids
Authors:
Debarghya Banerjee,
Anton Souslov,
Alexander G. Abanov,
Vincenzo Vitelli
Abstract:
Chiral active fluids are materials composed of self-spinning rotors that continuously inject energy and angular momentum at the microscale. Out-of-equilibrium fluids with active-rotor constituents have been experimentally realized using nanoscale biomolecular motors, microscale active colloids, or macroscale driven chiral grains. Here, we show how such chiral active fluids break both parity and ti…
▽ More
Chiral active fluids are materials composed of self-spinning rotors that continuously inject energy and angular momentum at the microscale. Out-of-equilibrium fluids with active-rotor constituents have been experimentally realized using nanoscale biomolecular motors, microscale active colloids, or macroscale driven chiral grains. Here, we show how such chiral active fluids break both parity and time-reversal symmetries in their steady states, giving rise to a dissipationless linear-response coefficient called odd viscosity in their constitutive relations. Odd viscosity couples pressure and vorticity leading, for example, to density modulations within a vortex profile. Moreover, chiral active fluids flow in the direction transverse to applied compression as in shock propagation experiments. We envision that this collective transverse response may be exploited to design self-assembled hydraulic cranks that convert between linear and rotational motion in microscopic machines powered by active-rotors fluids.
△ Less
Submitted 8 February, 2017;
originally announced February 2017.
-
Topological sound in active-liquid metamaterials
Authors:
Anton Souslov,
Benjamin C. van Zuiden,
Denis Bartolo,
Vincenzo Vitelli
Abstract:
Liquids composed of self-propelled particles have been experimentally realized using molecular, colloidal, or macroscopic constituents. These active liquids can flow spontaneously even in the absence of an external drive. Unlike spontaneous active flow, the propagation of density waves in confined active liquids is not well explored. Here, we exploit a map** between density waves on top of a chi…
▽ More
Liquids composed of self-propelled particles have been experimentally realized using molecular, colloidal, or macroscopic constituents. These active liquids can flow spontaneously even in the absence of an external drive. Unlike spontaneous active flow, the propagation of density waves in confined active liquids is not well explored. Here, we exploit a map** between density waves on top of a chiral flow and electrons in a synthetic gauge field to lay out design principles for artificial structures termed topological active metamaterials. We design metamaterials that break time-reversal symmetry using lattices composed of annular channels filled with a spontaneously flowing active liquid. Such active metamaterials support topologically protected sound modes that propagate unidirectionally, without backscattering, along either sample edges or domain walls and despite overdamped particle dynamics. Our work illustrates how parity-symmetry breaking in metamaterial structure combined with microscopic irreversibility of active matter leads to novel functionalities that cannot be achieved using only passive materials.
△ Less
Submitted 10 November, 2016; v1 submitted 21 October, 2016;
originally announced October 2016.
-
Sonic Landau-level lasing and synthetic gauge fields in mechanical metamaterials
Authors:
Hamed Abbaszadeh,
Anton Souslov,
Jayson Paulose,
Henning Schomerus,
Vincenzo Vitelli
Abstract:
Mechanical strain can lead to a synthetic gauge field that controls the dynamics of electrons in graphene sheets as well as light in photonic crystals. Here, we show how to engineer an analogous synthetic gauge field for lattice vibrations. Our approach relies on one of two strategies: shearing a honeycomb lattice of masses and springs or patterning its local material stiffness. As a result, vibra…
▽ More
Mechanical strain can lead to a synthetic gauge field that controls the dynamics of electrons in graphene sheets as well as light in photonic crystals. Here, we show how to engineer an analogous synthetic gauge field for lattice vibrations. Our approach relies on one of two strategies: shearing a honeycomb lattice of masses and springs or patterning its local material stiffness. As a result, vibrational spectra with discrete Landau levels are generated. Upon tuning the strength of the gauge field, we can control the density of states and transverse spatial confinement of sound in the metamaterial. We also use the gauge field to design waveguides in which sound propagates robustly, as a consequence of the change in topological polarization that occurs along a domain wall in the bulk of the metamaterial. By introducing dissipation, we can selectively enhance the domain-wall-bound topological sound mode, a feature that may be exploited for the design of sound amplification by stimulated emission of radiation - SASERs, the mechanical analogs of lasers.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Emergent collective properties of many-motor systems in one dimension
Authors:
Anton Souslov,
Paul M. Goldbart
Abstract:
Along a microtubule, certain active motors propel themselves in one direction whereas others propel themselves in the opposite direction. For example, the cargo transporting motor proteins dynein and kinesin propel themselves towards the so-called plus- and minus-ends of the microtubule, respectively, and in so doing are able to pass one another, but not without interacting. We address the emergen…
▽ More
Along a microtubule, certain active motors propel themselves in one direction whereas others propel themselves in the opposite direction. For example, the cargo transporting motor proteins dynein and kinesin propel themselves towards the so-called plus- and minus-ends of the microtubule, respectively, and in so doing are able to pass one another, but not without interacting. We address the emergent collective behavior of systems composed of many motors, some propelling towards the plus-end and others propelling towards the minus-end. To do this, we used an analogy between this strongly interacting, far-from-equilibrium, classical stochastic many-motor system and a certain quantum-mechanical many-body system evolving in imaginary time. We apply well-known methods from quantum many-body theory, including self-consistent mean-field theory and bosonization, to shed light on phenomena exhibited by the many-motor system such as structure formation and the dynamics of collective modes at low-frequencies and long-wavelengths. In particular, via the bosonized description we find analogs of chiral Luttinger liquids, as well as a qualitative transition in the nature of the low-frequency modes---from propagating to purely dissipative---controlled by density and interaction strength.
△ Less
Submitted 31 March, 2016; v1 submitted 29 May, 2015;
originally announced May 2015.
-
Beads on a string: Structure of bound aggregates of globular particles and long polymer chains
Authors:
Anton Souslov,
Jennifer E. Curtis,
Paul M. Goldbart
Abstract:
Macroscopic properties of suspensions, such as those composed of globular particles (e.g., colloidal or macromolecular), can be tuned by controlling the equilibrium aggregation of the particles. We examine how aggregation -- and, hence, macroscopic properties -- can be controlled in a system composed of both globular particles and long, flexible polymer chains that reversibly bind to one another.…
▽ More
Macroscopic properties of suspensions, such as those composed of globular particles (e.g., colloidal or macromolecular), can be tuned by controlling the equilibrium aggregation of the particles. We examine how aggregation -- and, hence, macroscopic properties -- can be controlled in a system composed of both globular particles and long, flexible polymer chains that reversibly bind to one another. We base this on a minimal statistical mechanical model of a single aggregate in which the polymer chain is treated either as ideal or self-avoiding, and, in addition, the globular particles are taken to interact with one another via excluded volume repulsion. Furthermore, each of the globular particles is taken to have one single site to which at most one polymer segment may bind. Within the context of this model, we examine the statistics of the equilibrium size of an aggregate and, thence, the structure of dilute and semidilute suspensions of these aggregates. We apply the model to biologically relevant aggregates, specifically those composed of macromolecular proteoglycan globules and long hyaluronan polymer chains. These aggregates are especially relevant to the materials properties of cartilage and the structure-function properties of perineuronal nets in brain tissue, as well as the pericellular coats of mammalian cells.
△ Less
Submitted 3 October, 2015; v1 submitted 28 May, 2015;
originally announced May 2015.
-
Phonons and elasticity in critically coordinated lattices
Authors:
T C Lubensky,
C L Kane,
Xiaoming Mao,
A Souslov,
Kai Sun
Abstract:
Much of our understanding of vibrational excitations and elasticity is based upon analysis of frames consisting of sites connected by bonds occupied by central-force springs, the stability of which depends on the average number of neighbors per site $z$. When $z<z_c \approx 2d$, where $d$ is the spatial dimension, frames are unstable with respect to internal deformations. This pedagogical review f…
▽ More
Much of our understanding of vibrational excitations and elasticity is based upon analysis of frames consisting of sites connected by bonds occupied by central-force springs, the stability of which depends on the average number of neighbors per site $z$. When $z<z_c \approx 2d$, where $d$ is the spatial dimension, frames are unstable with respect to internal deformations. This pedagogical review focuses on properties of frames with $z$ at or near $z_c$, which model systems like randomly packed spheres near jamming and network glasses. Using an index theorem, $N_0 - N_S = dN - N_B$ relating the number of sites, $N$, and number of bonds, $N_B$, to the number, $N_0$, of modes of zero energy and the number, $N_S$, of states of self stress, in which springs can be under positive or negative tension while forces on sites remain zero, it explores the properties of periodic square, kagome, and related lattices for which $z=z_c$ and the relation between states of self stress and zero modes in periodic lattices to the surface zero modes of finite free lattices (with free boundary conditions). It shows how modifications to the periodic kagome lattice can eliminate all but trivial translational zero modes and create topologically distinct classes, analogous to those of topological insulators, with protected zero modes at free boundaries and at interfaces between different topological classes.
△ Less
Submitted 4 March, 2015;
originally announced March 2015.
-
Emergent tilt order in Dirac polymer liquids
Authors:
Anton Souslov,
Benjamin Loewe,
Paul M. Goldbart
Abstract:
We study a liquid of zigzagging two-dimensional directed polymers with bending rigidity, i.e., polymers whose conformations follow checkerboard paths. In the continuum limit the statistics of such polymers obey the Dirac equation for particles of imaginary mass. We exploit this observation to investigate a liquid of these polymers via a quantum many-fermion analogy. A self-consistent approximation…
▽ More
We study a liquid of zigzagging two-dimensional directed polymers with bending rigidity, i.e., polymers whose conformations follow checkerboard paths. In the continuum limit the statistics of such polymers obey the Dirac equation for particles of imaginary mass. We exploit this observation to investigate a liquid of these polymers via a quantum many-fermion analogy. A self-consistent approximation predicts a phase of tilted order, in which the polymers may develop a preference to zig rather than zag. We compute the phase diagram and key response functions for the polymer liquid, and comment on the role played by fluctuations.
△ Less
Submitted 3 October, 2015; v1 submitted 23 December, 2014;
originally announced December 2014.
-
Impact of single-particle compressibility on the fluid-solid phase transition for ionic microgel suspensions
Authors:
M. Pelaez-Fernandez,
Anton Souslov,
L. A. Lyon,
Paul M. Goldbart,
A. Fernandez-Nieves
Abstract:
We study ionic microgel suspensions composed of swollen particles for various single-particle stiffnesses. We measure the osmotic pressure $π$ of these suspensions and show that it is dominated by the contribution of free ions in solution. As this ionic osmotic pressure depends on the volume fraction of the suspension $φ$, we can determine $φ$ from $π$, even at volume fractions so high that the mi…
▽ More
We study ionic microgel suspensions composed of swollen particles for various single-particle stiffnesses. We measure the osmotic pressure $π$ of these suspensions and show that it is dominated by the contribution of free ions in solution. As this ionic osmotic pressure depends on the volume fraction of the suspension $φ$, we can determine $φ$ from $π$, even at volume fractions so high that the microgel particles are compressed. We find that the width of the fluid-solid phase coexistence, measured using $φ$, is larger than its hard-sphere value for the stiffer microgels that we study and progressively decreases for softer microgels. For sufficiently soft microgels, the suspensions are fluid-like, irrespective of volume fraction. By calculating the dependence on $φ$ of the mean volume of a microgel particle, we show that the behavior of the phase-coexistence width correlates with whether or not the microgel particles are compressed at the volume fractions corresponding to fluid-solid coexistence.
△ Less
Submitted 17 October, 2014;
originally announced October 2014.
-
Mechanical instability at finite temperature
Authors:
Xiaoming Mao,
Anton Souslov,
Carlos I. Mendoza,
T. C. Lubensky
Abstract:
Many physical systems including lattices near structural phase transitions, glasses, jammed solids, and bio-polymer gels have coordination numbers that place them at the edge of mechanical instability. Their properties are determined by an interplay between soft mechanical modes and thermal fluctuations. In this paper we investigate a simple square-lattice model with a $φ^4$ potential between next…
▽ More
Many physical systems including lattices near structural phase transitions, glasses, jammed solids, and bio-polymer gels have coordination numbers that place them at the edge of mechanical instability. Their properties are determined by an interplay between soft mechanical modes and thermal fluctuations. In this paper we investigate a simple square-lattice model with a $φ^4$ potential between next-nearest-neighbor sites whose quadratic coefficient $κ$ can be tuned from positive negative. We show that its zero-temperature ground state for $κ<0$ is highly degenerate, and we use analytical techniques and simulation to explore its finite temperature properties. We show that a unique rhombic ground state is entropically favored at nonzero temperature at $κ<0$ and that the existence of a subextensive number of "floppy" modes whose frequencies vanish at $κ= 0$ leads to singular contributions to the free energy that render the square-to-rhombic transition first order and lead to power-law behavior of the shear modulus as a function of temperature. We expect our study to provide a general framework for the study of finite-temperature mechanical and phase behavior of other systems with a large number of floppy modes.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Organization of strongly interacting directed polymer liquids in the presence of stringent constraints
Authors:
Anton Souslov,
D. Zeb Rocklin,
Paul M. Goldbart
Abstract:
The impact of impenetrable obstacles on the energetics and equilibrium structure of strongly repulsive directed polymers is investigated. As a result of the strong interactions, regions of severe polymer depletion and excess are found in the vicinity of the obstacle, and the associated free-energy cost is found to scale quadratically with the average polymer density. The polymer-polymer interactio…
▽ More
The impact of impenetrable obstacles on the energetics and equilibrium structure of strongly repulsive directed polymers is investigated. As a result of the strong interactions, regions of severe polymer depletion and excess are found in the vicinity of the obstacle, and the associated free-energy cost is found to scale quadratically with the average polymer density. The polymer-polymer interactions are accounted for via a sequence of transformations: from the 3D line liquid to a 2D fluid of Bose particles to a 2D composite fermion fluid and, finally, to a 2D one-component plasma. The results presented here are applicable to a range of systems consisting of noncrossing directed lines.
△ Less
Submitted 28 August, 2013; v1 submitted 18 April, 2013;
originally announced April 2013.
-
Isostaticity, auxetic response, surface modes, and conformal invariance in twisted kagome lattices
Authors:
Kai Sun,
Anton Souslov,
Xiaoming Mao,
T. C. Lubensky
Abstract:
Model lattices consisting of balls connected by central-force springs provide much of our understanding of mechanical response and phonon structure of real materials. Their stability depends critically on their coordination number $z$. $d$-dimensional lattices with $z=2d$ are at the threshold of mechanical stability and are isostatic. Lattices with $z<2d$ exhibit zero-frequency "floppy" modes that…
▽ More
Model lattices consisting of balls connected by central-force springs provide much of our understanding of mechanical response and phonon structure of real materials. Their stability depends critically on their coordination number $z$. $d$-dimensional lattices with $z=2d$ are at the threshold of mechanical stability and are isostatic. Lattices with $z<2d$ exhibit zero-frequency "floppy" modes that provide avenues for lattice collapse. The physics of systems as diverse as architectural structures, network glasses, randomly packed spheres, and biopolymer networks is strongly influenced by a nearby isostatic lattice. We explore elasticity and phonons of a special class of two-dimensional isostatic lattices constructed by distorting the kagome lattice. We show that the phonon structure of these lattices, characterized by vanishing bulk moduli and thus negative Poisson ratios and auxetic elasticity, depends sensitively on boundary conditions and on the nature of the kagome distortions. We construct lattices that under free boundary conditions exhibit surface floppy modes only or a combination of both surface and bulk floppy modes; and we show that bulk floppy modes present under free boundary conditions are also present under periodic boundary conditions but that surface modes are not. In the the long-wavelength limit, the elastic theory of all these lattices is a conformally invariant field theory with holographic properties, and the surface waves are Rayleigh waves. We discuss our results in relation to recent work on jammed systems. Our results highlight the importance of network architecture in determining floppy-mode structure.
△ Less
Submitted 5 December, 2011;
originally announced December 2011.
-
Order-by-disorder in the antiferromagnetic Ising model on an elastic triangular lattice
Authors:
Yair Shokef,
Anton Souslov,
Tom C. Lubensky
Abstract:
Geometrically frustrated materials have a ground-state degeneracy that may be lifted by subtle effects, such as higher order interactions causing small energetic preferences for ordered structures. Alternatively, ordering may result from entropic differences between configurations in an effect termed order-by-disorder. Motivated by recent experiments in a frustrated colloidal system in which order…
▽ More
Geometrically frustrated materials have a ground-state degeneracy that may be lifted by subtle effects, such as higher order interactions causing small energetic preferences for ordered structures. Alternatively, ordering may result from entropic differences between configurations in an effect termed order-by-disorder. Motivated by recent experiments in a frustrated colloidal system in which ordering is suspected to result from entropy, we consider in this paper, the antiferromagnetic Ising model on a deformable triangular lattice. We calculate the displacements exactly at the microscopic level, and contrary to previous studies, find a partially disordered ground state of randomly zigzagging stripes. Each such configuration is deformed differently and thus has a unique phonon spectrum with distinct entropy, thus lifting the degeneracy at finite temperature. Nonetheless, due to the free-energy barriers between the ground-state configurations, the system falls into a disordered glassy state.
△ Less
Submitted 15 June, 2011; v1 submitted 15 August, 2010;
originally announced August 2010.
-
Elasticity and Response in Nearly Isostatic Periodic Lattices
Authors:
Anton Souslov,
Andrea J. Liu,
T. C. Lubensky
Abstract:
The square and kagome lattices with nearest neighbor springs of spring constant $k$ are isostatic with a number of zero-frequency modes that scale with their perimeter. We analytically study the approach to this isostatic limit as the spring constant $k'$ for next-nearest-neighbor bonds vanishes. We identify a characteristic frequency $ω^* \sim \sqrt{k'}$ and length $l^* \sim \sqrt{k/k'}$ for bo…
▽ More
The square and kagome lattices with nearest neighbor springs of spring constant $k$ are isostatic with a number of zero-frequency modes that scale with their perimeter. We analytically study the approach to this isostatic limit as the spring constant $k'$ for next-nearest-neighbor bonds vanishes. We identify a characteristic frequency $ω^* \sim \sqrt{k'}$ and length $l^* \sim \sqrt{k/k'}$ for both lattices. The shear modulus $C_{44}= k'$ of the square lattice vanishes with $k'$, but that for the kagome lattice does not.
△ Less
Submitted 13 November, 2009; v1 submitted 15 June, 2009;
originally announced June 2009.