Showing 1–24 of 24 results for author: Soulez, F

High contrast at short separation with VLTI/GRAVITY: Bringing Gaia companions to light

Authors: N. Pourré, T. O. Winterhalder, J. -B. Le Bouquin, S. Lacour, A. Bidot, M. Nowak, A. -L. Maire, D. Mouillet, C. Babusiaux, J. Woillez, R. Abuter, A. Amorim, R. Asensio-Torres, W. O. Balmer, M. Benisty, J. -P. Berger, H. Beust, S. Blunt, A. Boccaletti, M. Bonnefoy, H. Bonnet, M. S. Bordoni, G. Bourdarot, W. Brandner, F. Cantalloube , et al. (151 additional authors not shown)

Abstract: Since 2019, GRAVITY has provided direct observations of giant planets and brown dwarfs at separations of down to 95 mas from the host star. Some of these observations have provided the first direct confirmation of companions previously detected by indirect techniques (astrometry and radial velocities). We want to improve the observing strategy and data reduction in order to lower the inner working… ▽ More Since 2019, GRAVITY has provided direct observations of giant planets and brown dwarfs at separations of down to 95 mas from the host star. Some of these observations have provided the first direct confirmation of companions previously detected by indirect techniques (astrometry and radial velocities). We want to improve the observing strategy and data reduction in order to lower the inner working angle of GRAVITY in dual-field on-axis mode. We also want to determine the current limitations of the instrument when observing faint companions with separations in the 30-150 mas range. To improve the inner working angle, we propose a fiber off-pointing strategy during the observations to maximize the ratio of companion-light-to-star-light coupling in the science fiber. We also tested a lower-order model for speckles to decouple the companion light from the star light. We then evaluated the detection limits of GRAVITY using planet injection and retrieval in representative archival data. We compare our results to theoretical expectations. We validate our observing and data-reduction strategy with on-sky observations; first in the context of brown dwarf follow-up on the auxiliary telescopes with HD 984 B, and second with the first confirmation of a substellar candidate around the star Gaia DR3 2728129004119806464. With synthetic companion injection, we demonstrate that the instrument can detect companions down to a contrast of $8\times 10^{-4}$ ($Δ\mathrm{K}= 7.7$ mag) at a separation of 35 mas, and a contrast of $3\times 10^{-5}$ ($Δ\mathrm{K}= 11$ mag) at 100 mas from a bright primary (K<6.5), for 30 min exposure time. With its inner working angle and astrometric precision, GRAVITY has a unique reach in direct observation parameter space. This study demonstrates the promising synergies between GRAVITY and Gaia for the confirmation and characterization of substellar companions. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Comments: 16 pages, 14 figures. Submitted to A&A

Upgrading the GRAVITY fringe tracker for GRAVITY+: Tracking the white light fringe in the non-observable Optical Path Length state-space

Authors: M. Nowak, S. Lacour, R. Abuter, J. Woillez, R. Dembet, M. S. Bordoni, G. Bourdarot, B. Courtney-Barrer, D. Defrère, A. Drescher, F. Eisenhauer, M. Fabricius, H. Feuchtgruber, R. Frahm, P. Garcia, S. Gillessen, V. Gopinath, J. Graf, S. Hoenig, L. Kreidberg, R. Laugier, J. B. Le Bouquin, D. Lutz, F. Mang, F. Millour , et al. (13 additional authors not shown)

Abstract: Aims. As part of the ongoing GRAVITY+ upgrade of the Very Large Telescope Interferometer infrastructure, we aim to improve the performance of the GRAVITY Fringe-Tracker, and to enable its use by other instruments. Methods. We modify the group delay controller to consistently maintain tracking in the white light fringe, characterised by a minimum group delay. Additionally, we introduce a novel appr… ▽ More Aims. As part of the ongoing GRAVITY+ upgrade of the Very Large Telescope Interferometer infrastructure, we aim to improve the performance of the GRAVITY Fringe-Tracker, and to enable its use by other instruments. Methods. We modify the group delay controller to consistently maintain tracking in the white light fringe, characterised by a minimum group delay. Additionally, we introduce a novel approach in which fringe-tracking is performed in the non-observable Optical Path Length state-space, using a covariance-weighted Kalman filter and an auto-regressive model of the disturbance. We outline this new state-space representation, and the formalism we use to propagate the state-vector and generate the control signal. While our approach is presented specifically in the context of GRAVITY/GRAVITY+, it can easily be adapted to other instruments or interferometric facilities. Results. We successfully demonstrate phase delay tracking within a single fringe, with any spurious phase jumps detected and corrected in less than 100 ms. We also report a significant performance improvement, as evidenced by a reduction of about 30 to 40% in phase residuals, and a much better behaviour under sub-optimal atmospheric conditions. Compared to what was observed in 2019, the median residuals have decreased from 150 nm to 100 nm on the Auxiliary Telescopes and from 250 nm to 150 nm on the Unit Telescopes. Conclusions. The improved phase-delay tracking combined with whit light fringe tracking means that from now-on, the GRAVITY Fringe-Tracker can be used by other instruments operating in different wavebands. The only limitation remains the need for an optical path dispersion adjustment. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: 16 pages, 8 figures. Accepted for publication in A&A

A dynamical measure of the black hole mass in a quasar 11 billion years ago

Authors: R. Abuter, F. Allouche, A. Amorim, C. Bailet, A. Berdeu, J. -P. Berger, P. Berio, A. Bigioli, O. Boebion, M. -L. Bolzer, H. Bonnet, G. Bourdarot, P. Bourget, W. Brandner, Y. Cao, R. Conzelmann, M. Comin, Y. Clénet, B. Courtney-Barrer, R. Davies, D. Defrère, A. Delboulbé, F. Delplancke-Ströbele, R. Dembet, J. Dexter , et al. (102 additional authors not shown)

Abstract: Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves… ▽ More Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$α$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Comments: 5 pages Main text, 8 figures, 2 tables, to be published in Nature, under embargo until 29 January 2024 16:00 (London)

Optical Diffraction Tomography Meets Fluorescence Localization Microscopy

Authors: Thanh-An Pham, Emmanuel Soubies, Ferréol Soulez, Michael Unser

Abstract: We show that structural information can be extracted from single molecule localization microscopy (SMLM) data. More precisely, we reinterpret SMLM data as the measures of a phaseless optical diffraction tomography system for which the illumination sources are fluorophores within the sample. Building upon this model, we propose a joint optimization framework to estimate both the refractive index ma… ▽ More We show that structural information can be extracted from single molecule localization microscopy (SMLM) data. More precisely, we reinterpret SMLM data as the measures of a phaseless optical diffraction tomography system for which the illumination sources are fluorophores within the sample. Building upon this model, we propose a joint optimization framework to estimate both the refractive index map and the position of fluorescent molecules from the sole SMLM frames. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: Presented in ISCS23

Report number: ISCS-11

Characterization of stellar companion from high-contrast long-slit spectroscopy data: The EXtraction Of SPEctrum of COmpanion (EXOSPECO) algorithm

Authors: Samuel Thé, Éric Thiébaut, Loïc Denis, Thibault Wanner, Rémi Thiébaut, Maud Langlois, Ferréol Soulez

Abstract: High-contrast long-slit spectrographs can be used to characterize exoplanets. High-contrast long-slit spectroscopic data are however corrupted by stellar leakages which largely dominate other signals and make the process of extracting the companion spectrum very challenging. This paper presents a complete method to calibrate the spectrograph and extract the signal of interest. The proposed metho… ▽ More High-contrast long-slit spectrographs can be used to characterize exoplanets. High-contrast long-slit spectroscopic data are however corrupted by stellar leakages which largely dominate other signals and make the process of extracting the companion spectrum very challenging. This paper presents a complete method to calibrate the spectrograph and extract the signal of interest. The proposed method is based on a flexible direct model of the high-contrast long-slit spectroscopic data. This model explicitly accounts for the instrumental response and for the contributions of both the star and the companion. The contributions of these two components and the calibration parameters are jointly estimated by solving a regularized inverse problem. This problem having no closed-form solution, we propose an alternating minimization strategy to effectively find the solution. We have tested our method on empirical long-slit spectroscopic data and by injecting synthetic companion signals in these data. The proposed initialization and the alternating strategy effectively avoid the self-subtraction bias, even for companions observed very close to the coronagraphic mask. Careful modeling and calibration of the angular and spectral dispersion laws of the instrument clearly reduce the contamination by the stellar leakages. In practice, the outputs of the method are mostly driven by a single hyper-parameter which tunes the level of regularization of the companion SED. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: Paper under review by Astronomy & Astrophysics

Journal ref: A&A 678, A77 (2023)

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

Authors: GRAVITY+ Collaboration, :, Roberto Abuter, Patricio Alarcon, Fatme Allouche, Antonio Amorim, Christophe Bailet, Helen Bedigan, Anthony Berdeu, Jean-Philippe Berger, Philippe Berio, Azzurra Bigioli, Richard Blaho, Olivier Boebion, Marie-Lena Bolzer, Henri Bonnet, Guillaume Bourdarot, Pierre Bourget, Wolfgang Brandner, Cesar Cardenas, Ralf Conzelmann, Mauro Comin, Yann Clénet, Benjamin Courtney-Barrer, Yigit Dallilar , et al. (112 additional authors not shown)

Abstract: The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the im… ▽ More The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: Published in the ESO Messenger

IMAGE-OI: an OIFITS extension and its application in OImaging to compare image reconstruction algorithms

Authors: Ferréol Soulez, Laurent Bourgès, Antoine Kaszczyc, Guillaume Mella, Martin Pratoussy, Gilles Duvert, Jacques Kluska, Eric Thiébaut, John Young

Abstract: In interferometry, the quality of the reconstructed image depends on the algorithm used and its parameters, and users often need to compare the results of several algorithms to disentangle artifacts from actual features of the astrophysical object. Such comparisons can rapidly become cumbersome, as these software packages are very different. OImaging is a graphical interface intended to be a commo… ▽ More In interferometry, the quality of the reconstructed image depends on the algorithm used and its parameters, and users often need to compare the results of several algorithms to disentangle artifacts from actual features of the astrophysical object. Such comparisons can rapidly become cumbersome, as these software packages are very different. OImaging is a graphical interface intended to be a common frontend to image reconstruction software packages. With OImaging, the user can now perform multiple reconstructions within a single interface. From a given dataset, OImaging allows benchmarking of different image reconstruction algorithms and assessment of the reliability of the image reconstruction process. To that end, OImaging uses the IMAGE-OI OIFITS extension proposed to standardize communication with image reconstruction algorithms. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Journal ref: Proc. SPIE 12183, Optical and Infrared Interferometry and Imaging VIII, 121831H (26 August 2022);

Building a GRAVITY+ Adaptive Optics Test Bench

Authors: The Gravity Plus Consortium, Florentin Millour, Philippe Berio, Stéphane Lagarde, Sylvie Robbe-Dubois, Carole Gouvret, Olivier Lai, Fatmé Allouche, Christophe Bailet, Olivier Boebion, Marcel Carbillet, Aurélie Marcotto, Alain Spang, Paul Girard, Nicolas Mauclert, Jean-Baptiste Le Bouquin, Thibaut Paumard, Ferréol Soulez, Julien Woillez, Nikhil More, Frank Eisenhauer, Christian Straubmeier, Laura Kreidberg, Paulo J. V. Garcia, Sebastian Hoenig

Abstract: We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces… ▽ More We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Journal ref: SPIE, Jul 2022, Montr{é}al, France

First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer

Authors: GRAVITY+ Collaboration, :, R. Abuter, F. Allouche, A. Amorim, C. Bailet, M. Bauböck, J. -P. Berger, P. Berio, A. Bigioli, O. Boebion, M. L. Bolzer, H. Bonnet, G. Bourdarot, P. Bourget, W. Brandner, Y. Clénet, B. Courtney-Barrer, Y. Dallilar, R. Davies, D. Defrère, A. Delboulbé, F. Delplancke, R. Dembet, P. T. de Zeeuw , et al. (92 additional authors not shown)

Abstract: GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines t… ▽ More GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning. △ Less

Submitted 23 August, 2022; v1 submitted 1 June, 2022; originally announced June 2022.

Comments: 15 pages, 12 figures, 5 tables. Accepted by A&A

Journal ref: A&A 665, A75 (2022)

Gauging diffraction patterns: field of view and bandwidth estimation in lensless holography

Authors: Ferréol Soulez

Abstract: The purpose of this work is to provide theoretically grounded assessment on both the field-of-view and the bandwidth of a lensless holographic setup. Indeed, while previous works have presented results with super-resolution and field-of-view extrapolation, there is no well established rules to determine them. We show that the theoretical field of view can be hugely large with a spatial-frequency b… ▽ More The purpose of this work is to provide theoretically grounded assessment on both the field-of-view and the bandwidth of a lensless holographic setup. Indeed, while previous works have presented results with super-resolution and field-of-view extrapolation, there is no well established rules to determine them. We show that the theoretical field of view can be hugely large with a spatial-frequency bandwidth only limited by the wavelength leading to an unthinkable number of degrees of freedom. To keep a realistic field of view and bandwidth, we propose several practical bounds based on few setup properties: namely the noise level and the spatio-temporal coherence of the source. △ Less

Submitted 22 March, 2021; originally announced March 2021.

Journal ref: Applied optics, Optical Society of America, 2021, 60 (10), pp.B38

A family portrait of disk inner rims around Herbig Ae/Be stars: Hunting for warps, rings, self shadowing, and misalignments in the inner astronomical units

Authors: J. Kluska, J. -P. Berger, F. Malbet, B. Lazareff, M. Benisty, J. -B. Le Bouquin, O. Absil, F. Baron, A. Delboulbé, G. Duvert, A. Isella, L. Jocou, A. Juhasz, S. Kraus, R. Lachaume, F. Ménard, R. Millan-Gabet, J. D. Monnier, T. Moulin, K. Perraut, C. Pinte, S. Rochat, F. Soulez, M. Tallon, W. -F. Thi , et al. (3 additional authors not shown)

Abstract: The innermost astronomical unit in protoplanetary disks is a key region for stellar and planet formation, as exoplanet searches have shown a large occurrence of close-in planets that are located within the first au around their host star. We aim to reveal the morphology of the disk inner rim using near-infrared interferometric observations with milli-arcsecond resolution provided by infrared inter… ▽ More The innermost astronomical unit in protoplanetary disks is a key region for stellar and planet formation, as exoplanet searches have shown a large occurrence of close-in planets that are located within the first au around their host star. We aim to reveal the morphology of the disk inner rim using near-infrared interferometric observations with milli-arcsecond resolution provided by infrared interferometry. We provide reconstructed images of 15 objects selected from the Herbig AeBe survey carried out with PIONIER at the VLTI, using SPARCO. We find that 40% of the systems are centrosymmetric at the angular resolution of the observations. For the rest of the objects, we find evidence for asymmetric emission due to moderate-to-strong inclination of a disk-like structure for 30% of the objects and noncentrosymmetric morphology due to a nonaxisymmetric and possibly variable environment (30%). Among the systems with a disk-like structure, 20% show a resolved dust-free cavity. The image reconstruction process is a powerful tool to reveal complex disk inner rim morphologies. At the angular resolution reached by near-infrared interferometric observations, most of the images are compatible with a centrally peaked emission (no cavity). For the most resolved targets, image reconstruction reveals morphologies that cannot be reproduced by generic parametric models. Moreover, the nonaxisymmetric disks show that the spatial resolution probed by optical interferometers makes the observations of the near-infrared emission sensitive to temporal evolution with a time-scale down to a few weeks. The evidence of nonaxisymmetric emission that cannot be explained by simple inclination and radiative transfer effects requires alternative explanations, such as a war** of the inner disks. Interferometric observations can, therefore, be used to follow the evolution of the asymmetry of those disks at a sub-au scale. △ Less

Submitted 3 April, 2020; originally announced April 2020.

Comments: Accepted in A&A, 24pages, 22 figures

Journal ref: A&A 636, A116 (2020)

SPHERE+: Imaging young Jupiters down to the snowline

Authors: A. Boccaletti, G. Chauvin, D. Mouillet, O. Absil, F. Allard, S. Antoniucci, J. -C. Augereau, P. Barge, A. Baruffolo, J. -L. Baudino, P. Baudoz, M. Beaulieu, M. Benisty, J. -L. Beuzit, A. Bianco, B. Biller, B. Bonavita, M. Bonnefoy, S. Bos, J. -C. Bouret, W. Brandner, N. Buchschache, B. Carry, F. Cantalloube, E. Cascone , et al. (108 additional authors not shown)

Abstract: SPHERE (Beuzit et al,. 2019) has now been in operation at the VLT for more than 5 years, demonstrating a high level of performance. SPHERE has produced outstanding results using a variety of operating modes, primarily in the field of direct imaging of exoplanetary systems, focusing on exoplanets as point sources and circumstellar disks as extended objects. The achievements obtained thus far with S… ▽ More SPHERE (Beuzit et al,. 2019) has now been in operation at the VLT for more than 5 years, demonstrating a high level of performance. SPHERE has produced outstanding results using a variety of operating modes, primarily in the field of direct imaging of exoplanetary systems, focusing on exoplanets as point sources and circumstellar disks as extended objects. The achievements obtained thus far with SPHERE (~200 refereed publications) in different areas (exoplanets, disks, solar system, stellar physics...) have motivated a large consortium to propose an even more ambitious set of science cases, and its corresponding technical implementation in the form of an upgrade. The SPHERE+ project capitalizes on the expertise and lessons learned from SPHERE to push high contrast imaging performance to its limits on the VLT 8m-telescope. The scientific program of SPHERE+ described in this document will open a new and compelling scientific window for the upcoming decade in strong synergy with ground-based facilities (VLT/I, ELT, ALMA, and SKA) and space missions (Gaia, JWST, PLATO and WFIRST). While SPHERE has sampled the outer parts of planetary systems beyond a few tens of AU, SPHERE+ will dig into the inner regions around stars to reveal and characterize by mean of spectroscopy the giant planet population down to the snow line. Building on SPHERE's scientific heritage and resounding success, SPHERE+ will be a dedicated survey instrument which will strengthen the leadership of ESO and the European community in the very competitive field of direct imaging of exoplanetary systems. With enhanced capabilities, it will enable an even broader diversity of science cases including the study of the solar system, the birth and death of stars and the exploration of the inner regions of active galactic nuclei. △ Less

Submitted 13 March, 2020; v1 submitted 12 March, 2020; originally announced March 2020.

Comments: White paper submitted to ESO on Feb. 20th, 2020

Pocket Guide to Solve Inverse Problems with GlobalBioIm

Authors: Emmanuel Soubies, Ferréol Soulez, Michael T. McCann, Thanh-an Pham, Laurène Donati, Thomas Debarre, Daniel Sage, Michael Unser

Abstract: GlobalBioIm is an open-source MATLAB library for solving inverse problems. The library capitalizes on the strong commonalities between forward models to standardize the resolution of a wide range of imaging inverse problems. Endowed with an operator-algebra mechanism, GlobalBioIm allows one to easily solve inverse problems by combining elementary modules in a lego-like fashion. This user-friendly… ▽ More GlobalBioIm is an open-source MATLAB library for solving inverse problems. The library capitalizes on the strong commonalities between forward models to standardize the resolution of a wide range of imaging inverse problems. Endowed with an operator-algebra mechanism, GlobalBioIm allows one to easily solve inverse problems by combining elementary modules in a lego-like fashion. This user-friendly toolbox gives access to cutting-edge reconstruction algorithms, while its high modularity makes it easily extensible to new modalities and novel reconstruction methods. We expect GlobalBioIm to respond to the needs of imaging scientists looking for reliable and easy-to-use computational tools for solving their inverse problems. In this paper, we present in detail the structure and main features of the library. We also illustrate its flexibility with examples from multichannel deconvolution microscopy. △ Less

Submitted 7 January, 2019; v1 submitted 19 December, 2018; originally announced December 2018.

Journal ref: Inverse Problems 35 (2019) 104006

Proximity Operators for Phase Retrieval

Authors: Ferréol Soulez, Éric Thiébaut, Antony Schutz, André Ferrari, Frédéric Courbin, Michael Unser

Abstract: We present a new formulation of a family of proximity operators that generalize the projector step for phase retrieval. These proximity operators for noisy intensity measurements can replace the classical "noise free" projection in any projection-based algorithm. They are derived from a maximum likelihood formulation and admit closed form solutions for both the Gaussian and the Poisson cases. In a… ▽ More We present a new formulation of a family of proximity operators that generalize the projector step for phase retrieval. These proximity operators for noisy intensity measurements can replace the classical "noise free" projection in any projection-based algorithm. They are derived from a maximum likelihood formulation and admit closed form solutions for both the Gaussian and the Poisson cases. In addition, we extend these proximity operators to undersampled intensity measurements. To assess their performance, these operators are exploited in a classical Gerchberg Saxton algorithm. We present numerical experiments showing that the reconstructed complex amplitudes with these proximity operators perform always better than using the classical intensity projector while their computational overhead is moderate. △ Less

Submitted 27 October, 2017; originally announced October 2017.

Journal ref: Applied Optics Vol. 55, Issue 26, pp. 7412-7421 (2016)

Science cases for a visible interferometer

Authors: Philippe Stee, France Allard, Myriam Benisty, Lionel Bigot, Nicolas Blind, Henri Boffin, Marcelo Borges Fernandes, Alex Carciofi, Andrea Chiavassa, Orlagh Creevey, Pierre Cruzalebes, Willem-Jan de Wit, Armando Domiciano de Souza, Martin Elvis, Nicolas Fabas, Daniel Faes, Alexandre Gallenne, Carlos Guerrero Pena, Michel Hillen, Sebastian Hoenig, Michael Ireland, Pierre Kervella, Makoto Kishimoto, Nadia Kostogryz, Stefan Kraus , et al. (32 additional authors not shown)

Abstract: High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome… ▽ More High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of develo** strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41. △ Less

Submitted 21 March, 2017; v1 submitted 7 March, 2017; originally announced March 2017.

Comments: White Paper prospective. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41. v2 includes some corrections to text

Structure of Herbig AeBe disks at the milliarcsecond scale A statistical survey in the H band using PIONIER-VLTI

Authors: B. Lazareff, J. -P. Berger, J. Kluska, J. -B. Le Bouquin, M. Benisty, F. Malbet, C. Koen, C. Pinte, W. -F. Thi, O. Absil, F. Baron, A. Delboulbé, G. Duvert, A. Isella, L. Jocou, A. Juhasz, S. Kraus, R. Lachaume, F. Ménard, R. Millan-Gabet, J. D. Monnier, T. Moulin, K. Perraut, S. Rochat, F. Soulez , et al. (4 additional authors not shown)

Abstract: Context. It is now generally accepted that the near-infrared excess of Herbig AeBe stars originates in the dust of a circumstellar disk. Aims. The aims of this article are to infer the radial and vertical structure of these disks at scales of order one au, and the properties of the dust grains. Methods. The program objects (51 in total) were observed with the H-band (1.6micron) PIONIER/VLTI interf… ▽ More Context. It is now generally accepted that the near-infrared excess of Herbig AeBe stars originates in the dust of a circumstellar disk. Aims. The aims of this article are to infer the radial and vertical structure of these disks at scales of order one au, and the properties of the dust grains. Methods. The program objects (51 in total) were observed with the H-band (1.6micron) PIONIER/VLTI interferometer. The largest baselines allowed us to resolve (at least partially) structures of a few tenths of an au at typical distances of a few hundred parsecs. Dedicated UBVRIJHK photometric measurements were also obtained. Spectral and 2D geometrical parameters are extracted via fits of a few simple models: ellipsoids and broadened rings with azimuthal modulation. Model bias is mitigated by parallel fits of physical disk models. Sample statistics were evaluated against similar statistics for the physical disk models to infer properties of the sample objects as a group. Results. We find that dust at the inner rim of the disk has a sublimation temperature Tsub~1800K. A ring morphology is confirmed for approximately half the resolved objects; these rings are wide delta_r>=0.5. A wide ring favors a rim that, on the star-facing side, looks more like a knife edge than a doughnut. The data are also compatible with a the combination of a narrow ring and an inner disk of unspecified nature inside the dust sublimation radius. The disk inner part has a thickness z/r~0.2, flaring to z/r~0.5 in the outer part. We confirm the known luminosity-radius relation; a simple physical model is consistent with both the mean luminosity-radius relation and the ring relative width; however, a significant spread around the mean relation is present. In some of the objects we find a halo component, fully resolved at the shortest interferometer spacing, that is related to the HAeBe class. △ Less

Submitted 25 November, 2016; originally announced November 2016.

Comments: 41 pages. 23 figures. Four appendices

Journal ref: A&A 599, A85 (2017)

Back-propagating the light of field stars to probe telescope mirrors aberrations

Authors: Ferréol Soulez, Frédéric Courbin, Michael Unser

Abstract: We propose a wavefront-based method to estimate the PSF over the whole field of view. This method estimate the aberrations of all the mirrors of the telescope using only field stars. In this proof of concept paper, we described the method and present some qualitative results. We propose a wavefront-based method to estimate the PSF over the whole field of view. This method estimate the aberrations of all the mirrors of the telescope using only field stars. In this proof of concept paper, we described the method and present some qualitative results. △ Less

Submitted 5 August, 2016; originally announced August 2016.

Journal ref: Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 991277 (July 22, 2016)

A disk asymmetry in motion around the B[e] star MWC158

Authors: J. Kluska, M. Benisty, F. Soulez, J. -P. Berger, J. -B. Le Bouquin, F. Malbet, B. Lazareff, E. Thiébaut

Abstract: MWC158 is a star with the B[e] phenomenon that shows strong spectrophotometric variability (in lines and in UV and visible continuum) attributed to phases of shell ejection. The evolutionary stage of this star was never clearly determined. Previous interferometric, spectropolarimetric and spectro-interferometric studies suggest a disk morphology for its environment. We investigate the origin of th… ▽ More MWC158 is a star with the B[e] phenomenon that shows strong spectrophotometric variability (in lines and in UV and visible continuum) attributed to phases of shell ejection. The evolutionary stage of this star was never clearly determined. Previous interferometric, spectropolarimetric and spectro-interferometric studies suggest a disk morphology for its environment. We investigate the origin of the variability within the inner astronomical unit of the central star using near-infrared interferometric observations with PIONIER at the VLTI over a two-year period. We performed an image reconstruction of the circumstellar environment using the SPARCO method. We discovered that the morphology of the circumstellar environment could vary on timescales of weeks or days. We carried out a parametric fit of the data with a model consisting of a star, a disk and a bright spot that represents a brighter emission in the disk. We detect strong morphological changes in the first astronomical unit around the star, that happen on a timescale of few months. We cannot account for such variability well with a binary model. Our parametric model fits the data well and allows us to extract the location of the asymmetry for different epochs. For the first time, we detect a morphological variability in the environment of MWC158. This variability is reproduced by a model of a disk and a bright spot. The locations of the bright spot suggest that it is located in the disk, but its precise motion is not determined. The origin of the asymmetry in the disk is complex and may be related to asymmetric shell ejections. △ Less

Submitted 17 May, 2016; originally announced May 2016.

Comments: Accepted for publication in A&A

Journal ref: A&A 591, A82 (2016)

Large Scale 3D Image Reconstruction in Optical Interferometry

Authors: Antony Schutz, André Ferrari, David Mary, Eric Thiébaut, Ferréol Soulez

Abstract: Astronomical optical interferometers (OI) sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid atmospheric perturbations, the phases of the complex Fourier samples (visibilities) cannot be directly exploited , and instead linear relationships between the phases are used (phase closures and differential phases). Consequently, specifi… ▽ More Astronomical optical interferometers (OI) sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid atmospheric perturbations, the phases of the complex Fourier samples (visibilities) cannot be directly exploited , and instead linear relationships between the phases are used (phase closures and differential phases). Consequently, specific image reconstruction methods have been devised in the last few decades. Modern polychromatic OI instruments are now paving the way to multiwavelength imaging. This paper presents the derivation of a spatio-spectral ("3D") image reconstruction algorithm called PAINTER (Polychromatic opticAl INTErferometric Reconstruction software). The algorithm is able to solve large scale problems. It relies on an iterative process, which alternates estimation of polychromatic images and of complex visibilities. The complex visibilities are not only estimated from squared moduli and closure phases, but also from differential phases, which help to better constrain the polychromatic reconstruction. Simulations on synthetic data illustrate the efficiency of the algorithm. △ Less

Submitted 5 March, 2015; originally announced March 2015.

Comments: EUSIPCO, Aug 2015, NICE, France

PAINTER: a spatio-spectral image reconstruction algorithm for optical interferometry

Authors: Antony Schutz, André Ferrari, David Mary, Férréol Soulez, Éric Thiébaut, Martin Vannier

Abstract: Astronomical optical interferometers sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid perturbations caused by atmospheric turbulence, the phases of the complex Fourier samples (visibilities) cannot be directly exploited. Consequently, specific image reconstruction methods have been devised in the last few decades. Modern polychr… ▽ More Astronomical optical interferometers sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid perturbations caused by atmospheric turbulence, the phases of the complex Fourier samples (visibilities) cannot be directly exploited. Consequently, specific image reconstruction methods have been devised in the last few decades. Modern polychromatic optical interferometric instruments are now paving the way to multiwavelength imaging. This paper is devoted to the derivation of a spatio-spectral (3D) image reconstruction algorithm, coined PAINTER (Polychromatic opticAl INTErferometric Reconstruction software). The algorithm relies on an iterative process, which alternates estimation of polychromatic images and of complex visibilities. The complex visibilities are not only estimated from squared moduli and closure phases, but also differential phases, which helps to better constrain the polychromatic reconstruction. Simulations on synthetic data illustrate the efficiency of the algorithm and in particular the relevance of injecting a differential phases model in the reconstruction. △ Less

Submitted 27 September, 2014; v1 submitted 29 June, 2014; originally announced July 2014.

Comments: 12 pages, 10 figures, http://www.opticsinfobase.org/submit/review/copyright_permissions.cfm

SPARCO : a semi-parametric approach for image reconstruction of chromatic objects

Authors: J. Kluska, F. Malbet, J. -P. Berger, F. Baron, B. Lazareff, J. -B. Le Bouquin, J. D. Monnier, F. Soulez, E. Thiébaut

Abstract: The emergence of optical interferometers with three and more telescopes allows image reconstruction of astronomical objects at the milliarcsecond scale. However, some objects contain components with very different spectral energy distributions (SED; i.e. different temperatures), which produces strong chromatic effects on the interferograms that have to be managed with care by image reconstruction… ▽ More The emergence of optical interferometers with three and more telescopes allows image reconstruction of astronomical objects at the milliarcsecond scale. However, some objects contain components with very different spectral energy distributions (SED; i.e. different temperatures), which produces strong chromatic effects on the interferograms that have to be managed with care by image reconstruction algorithms. For example, the gray approximation for the image reconstruction process results in a degraded image if the total (u, v)-coverage given by the spectral supersynthesis is used. The relative flux contribution of the central object and an extended structure changes with wavelength for different temperatures. For young stellar objects, the known characteristics of the central object (i.e., stellar SED), or even the fit of the spectral index and the relative flux ratio, can be used to model the central star while reconstructing the image of the extended structure separately. Methods. We present a new method, called SPARCO (semi-parametric algorithm for the image reconstruction of chromatic objects), which describes the spectral characteristics of both the central object and the extended structure to consider them properly when reconstructing the image of the surrounding environment. We adapted two image-reconstruction codes (Macim, Squeeze, and MiRA) to implement this new prescription. SPARCO is applied using Macim, Squeeze and MiRA on a young stellar object model and also on literature data on HR5999 in the near-infrared with the VLTI. This method paves the way to improved aperture-synthesis imaging of several young stellar objects with existing datasets. More generally, the approach can be used on astrophysical sources with similar features such as active galactic nuclei, planetary nebulae, and asymptotic giant branch stars. △ Less

Submitted 13 March, 2014; originally announced March 2014.

Comments: 11 pages, 11 figures, accepted in A&A

Exploiting spatial sparsity for multi-wavelength imaging in optical interferometry

Authors: Éric Thiébaut, Ferréol Soulez, Loïc Denis

Abstract: Optical interferometers provide multiple wavelength measurements. In order to fully exploit the spectral and spatial resolution of these instruments, new algorithms for image reconstruction have to be developed. Early attempts to deal with multi-chromatic interferometric data have consisted in recovering a gray image of the object or independent monochromatic images in some spectral bandwidths. Th… ▽ More Optical interferometers provide multiple wavelength measurements. In order to fully exploit the spectral and spatial resolution of these instruments, new algorithms for image reconstruction have to be developed. Early attempts to deal with multi-chromatic interferometric data have consisted in recovering a gray image of the object or independent monochromatic images in some spectral bandwidths. The main challenge is now to recover the full 3-D (spatio-spectral) brightness distribution of the astronomical target given all the available data. We describe a new approach to implement multi-wavelength image reconstruction in the case where the observed scene is a collection of point-like sources. We show the gain in image quality (both spatially and spectrally) achieved by globally taking into account all the data instead of dealing with independent spectral slices. This is achieved thanks to a regularization which favors spatial sparsity and spectral grou** of the sources. Since the objective function is not differentiable, we had to develop a specialized optimization algorithm which also accounts for non-negativity of the brightness distribution. △ Less

Submitted 18 December, 2012; v1 submitted 11 September, 2012; originally announced September 2012.

Comments: This version has been accepted for publication in J. Opt. Soc. Am. A

The 2012 Interferometric Imaging Beauty Contest

Authors: Fabien Baron, William D. Cotton, Peter R. Lawson, Steve T. Ridgway, Alicia Aarnio, John D. Monnier, Karl-Heinz Hofmann, Dieter Schertl, Gerd Weigelt, Eric Thiébaut, Férréol Soulez, David Mary, Florentin Millour, Martin Vannier, John Young, Nicholas M. Elias II, Henrique R. Schmitt, Sridharan Rengaswamy

Abstract: We present the results of the fifth Interferometric Imaging Beauty Contest. The contest consists in blind imaging of test data sets derived from model sources and distributed in the OIFITS format. Two scenarios of imaging with CHARA/MIRC-6T were offered for reconstruction: imaging a T Tauri disc and imaging a spotted red supergiant. There were eight different teams competing this time: Monnier wit… ▽ More We present the results of the fifth Interferometric Imaging Beauty Contest. The contest consists in blind imaging of test data sets derived from model sources and distributed in the OIFITS format. Two scenarios of imaging with CHARA/MIRC-6T were offered for reconstruction: imaging a T Tauri disc and imaging a spotted red supergiant. There were eight different teams competing this time: Monnier with the software package MACIM; Hofmann, Schertl and Weigelt with IRS; Thiébaut and Soulez with MiRA ; Young with BSMEM; Mary and Vannier with MIROIRS; Millour and Vannier with independent BSMEM and MiRA entries; Rengaswamy with an original method; and Elias with the radio-astronomy package CASA. The contest model images, the data delivered to the contestants and the rules are described as well as the results of the image reconstruction obtained by each method. These results are discussed as well as the strengths and limitations of each algorithm. △ Less

Submitted 1 August, 2012; v1 submitted 30 July, 2012; originally announced July 2012.

3-D deconvolution of hyper-spectral astronomical data

Authors: S. Bongard, F. Soulez, E. Thiebaut, E. Pécontal

Abstract: In this paper we present a general forward fitting method for multichannel image restoration based on regularized chi2. We introduce separable regularizations that account for the dynamic of the model and take advantage of the continuities present in the data, leaving only two hyper-parameters to tune. We illustrate a practical implementation of this method in the context of host galaxy subtractio… ▽ More In this paper we present a general forward fitting method for multichannel image restoration based on regularized chi2. We introduce separable regularizations that account for the dynamic of the model and take advantage of the continuities present in the data, leaving only two hyper-parameters to tune. We illustrate a practical implementation of this method in the context of host galaxy subtraction for the Nearby SuperNova factory. We show that the image restoration obtained fulfills the stringent requirements on bias and photometricity needed by this program. The reconstruction yields sub-percent integrated residuals in all the synthetic filters considered both on real and simulated data. Even though our implementation is tied to the SNfactory data, the method translates to any hyper-spectral data. As such, it is of direct relevance to several new generation instruments like MUSE. Also, this technique could be applied to multi-band astronomical imaging for which image reconstruction is important, for example to increase image resolution for weak lensing surveys. △ Less

Submitted 20 July, 2011; originally announced July 2011.

Comments: 14 pages, 12 figures, 3 tables. Accepted for publication in MNRAS