-
Two-photon imaging of soliton dynamics
Authors:
Lukasz A. Sterczewski,
Jaroslaw Sotor
Abstract:
Optical solitary waves (solitons) that interact in a nonlinear system can bind and form a structure similar to a molecule. The rich dynamics of this process have created a demand for rapid spectral characterization to deepen the understanding of soliton physics with many practical implications. Here, we demonstrate stroboscopic, two-photon imaging of soliton molecules (SM) with completely unsynchr…
▽ More
Optical solitary waves (solitons) that interact in a nonlinear system can bind and form a structure similar to a molecule. The rich dynamics of this process have created a demand for rapid spectral characterization to deepen the understanding of soliton physics with many practical implications. Here, we demonstrate stroboscopic, two-photon imaging of soliton molecules (SM) with completely unsynchronized lasers, where the wavelength and bandwidth constraints are considerably eased compared to conventional imaging techniques. Two-photon detection enables the probe and tested oscillator to operate at completely different wavelengths, which permits mature near-infrared laser technology to be leveraged for rapid SM studies of emerging long-wavelength laser sources. As a demonstration, using a 1550 nm probe laser we image the behavior of soliton singlets across the 1800-2100 nm range, and capture the rich dynamics of evolving multiatomic SM. This technique may prove to be an essential, easy-to-implement diagnostic tool for detecting the presence of loosely-bound SM, which often remain unnoticed due to instrumental resolution or bandwidth limitations.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Soliton trap** and orthogonal Raman scattering in a birefringent microstructured fiber
Authors:
Karolina Stefańska,
Sylwia Majchrowska,
Karolina Gemza,
Grzegorz Soboń,
Jarosław Sotor,
Paweł Mergo,
Karol Tarnowski,
Tadeusz Martynkien
Abstract:
We report on trapped pulse generation in birefringent microstructured optical fiber. Linearly polarized fs pulses are injected into the microstructured fiber in anomalous dispersion regime. We observed experimentally that soliton pulse polarized along the fast fiber axis partially transfers its energy to the orthogonal polarization. The generated pulse is amplified through the orthogonal Raman gai…
▽ More
We report on trapped pulse generation in birefringent microstructured optical fiber. Linearly polarized fs pulses are injected into the microstructured fiber in anomalous dispersion regime. We observed experimentally that soliton pulse polarized along the fast fiber axis partially transfers its energy to the orthogonal polarization. The generated pulse is amplified through the orthogonal Raman gain. The two polarization components are located at group-velocity matched wavelengths. The experimental works are supported with numerical simulations. The obtained results are important for the light sources using self-frequency shifted solitons in applications demanding high polarization purity.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Dual-dispersion-regime dual-comb mode-locked laser
Authors:
Maciej Kowalczyk,
Łukasz A. Sterczewski,
Xuzhao Zhang,
Valentin Petrov,
Jarosław Sotor
Abstract:
We report on the first solid-state dual-comb mode-locked laser simultaneously operating in different dispersion regimes. Due to the intrinsic polarization-multiplexing in a birefringent Yb:Ca$_3$NbGa$_3$Si$_2$O$_{14}$ (Yb:CNGS) gain medium, the laser emits two cross-polarized pulse trains with a repetition rate offset of ~4.8 kHz from a single cavity. We obtain dual pulse generation with 20-fold d…
▽ More
We report on the first solid-state dual-comb mode-locked laser simultaneously operating in different dispersion regimes. Due to the intrinsic polarization-multiplexing in a birefringent Yb:Ca$_3$NbGa$_3$Si$_2$O$_{14}$ (Yb:CNGS) gain medium, the laser emits two cross-polarized pulse trains with a repetition rate offset of ~4.8 kHz from a single cavity. We obtain dual pulse generation with 20-fold difference in the duration, by setting the net cavity group delay dispersion to cross zero across the emission band of the employed gain medium. While the duration of the soliton-like pulses experiencing anomalous dispersion amounts to 117 fs, the second laser output that is spectrally located in the normal dispersion region, is strongly chirped with a pulse duration of 2360 fs.
△ Less
Submitted 29 January, 2024; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Dual-wavelength pumped highly birefringent microstructured silica fiber for widely tunable soliton self-frequency shift
Authors:
Olga Szewczyk,
Piotr Pala,
Karol Tarnowski,
Jacek Olszewski,
Francisco Senna Vieira,
Chuang Lu,
Aleksandra Foltynowicz,
Pawel Mergo,
Jaroslaw Sotor,
Grzegorz Sobon,
Tadeusz Martynkien
Abstract:
We report the design of a microstructured silica-based fiber for widely tunable soliton self-frequency shift, suitable for pum** with two most common fiber laser wavelengths: 1.04 μm and 1.55 μm. Depending on the pump source, the output spectrum can be continuously tuned up to 1.67 μm (pump at 1.04 μm) or 1.95 μm (pump at 1.55 μm) in the same 1.5 m-long fiber sample, with pump-to-soliton convers…
▽ More
We report the design of a microstructured silica-based fiber for widely tunable soliton self-frequency shift, suitable for pum** with two most common fiber laser wavelengths: 1.04 μm and 1.55 μm. Depending on the pump source, the output spectrum can be continuously tuned up to 1.67 μm (pump at 1.04 μm) or 1.95 μm (pump at 1.55 μm) in the same 1.5 m-long fiber sample, with pump-to-soliton conversion efficiency higher than 20%. The fiber is highly birefringent, which results in an excellent polarization extinction ratio of the soliton, reaching 26 dB. The shifted solitons have a high degree of coherence confirmed by pulse-to-pulse interference measurement. The available soliton tuning range covers the wavelengths inaccessible for fiber lasers, e.g., 1.3 μm and 1.7 μm, highly important for multi-photon microscopy and imaging. Our work shows that it is possible to design and fabricate one universal optical fiber that supports soliton shift when pumped at two different wavelengths separated by over 500 nm.
△ Less
Submitted 4 February, 2021; v1 submitted 28 November, 2020;
originally announced November 2020.
-
Dual-comb femtosecond solid-state laser with inherent polarization-multiplexing
Authors:
Maciej Kowalczyk,
Łukasz Sterczewski,
Xuzhao Zhang,
Valentin Petrov,
Zheng** Wang,
Jarosław Sotor
Abstract:
Dual-comb spectroscopy is a rapidly develo** technique enabling ultraprecise broadband optical diagnostics of atoms and molecules. This powerful tool typically requires two phase-locked femtosecond lasers, yet it has been shown that it can be realized without any stabilization if the combs are generated from a single laser cavity. Still, unavoidable intrinsic relative phase-fluctuations always s…
▽ More
Dual-comb spectroscopy is a rapidly develo** technique enabling ultraprecise broadband optical diagnostics of atoms and molecules. This powerful tool typically requires two phase-locked femtosecond lasers, yet it has been shown that it can be realized without any stabilization if the combs are generated from a single laser cavity. Still, unavoidable intrinsic relative phase-fluctuations always set a limit on the precision of any spectroscopic measurements, hitherto limiting the applicability of bulk dual-comb lasers for mode-resolved studies. Here, we demonstrate a versatile concept for low-noise dual-comb generation from a single-cavity femtosecond solid-state laser based on intrinsic polarization-multiplexing inside an optically anisotropic gain crystal. Due to intracavity spatial separation of the orthogonally-polarized beams, two sub-100 fs pulse trains are simultaneously generated from a 1.05 $μ$m Yb:CNGS oscillator with a repetition rate difference of 4.7 kHz. The laser exhibits the lowest relative noise ever demonstrated for a bulk dual-comb source, supporting free-running mode-resolved spectroscopic measurements over a second. Moreover, the developed dual-comb generation technique can be applied to any solid-state laser exploiting a birefringent active crystal, paving the way towards a new class of highly-coherent, single-cavity, dual-comb laser sources operating in various spectral regions.
△ Less
Submitted 11 September, 2020;
originally announced September 2020.
-
Compact mode-locked Er-doped fiber laser for broadband cavity-enhanced spectroscopy
Authors:
Aleksander Głuszek,
Francisco Senna Vieira,
Arkadiusz Hudzikowski,
Adam Wąż,
Jarosław Sotor,
Aleksandra Foltynowicz,
Grzegorz Soboń
Abstract:
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tunin…
▽ More
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tuning of the repetition rate and its stabilization to an external reference source. The applicability of the laser to molecular spectroscopy is demonstrated by detecting CO2 in air using continuous-filtering Vernier spectroscopy.
△ Less
Submitted 28 April, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Computational Doppler-limited dual-comb spectroscopy with a free-running all-fiber laser
Authors:
Łukasz A. Sterczewski,
Aleksandra Przewłoka,
Wawrzyniec Kaszub,
Jarosław Sotor
Abstract:
Dual-comb spectroscopy has emerged as an indispensable analytical technique in applications that require high resolution and broadband coverage within short acquisition times. Its experimental realization, however, remains hampered by intricate experimental setups with large power consumption. Here, we demonstrate an ultra-simple free-running dual-comb spectrometer realized in a single all-fiber c…
▽ More
Dual-comb spectroscopy has emerged as an indispensable analytical technique in applications that require high resolution and broadband coverage within short acquisition times. Its experimental realization, however, remains hampered by intricate experimental setups with large power consumption. Here, we demonstrate an ultra-simple free-running dual-comb spectrometer realized in a single all-fiber cavity suitable for the most demanding Doppler-limited measurements. Our dual-comb laser utilizes just a few basic fiber components, allows to tailor the repetition rate difference, and requires only 350 mW of electrical power for sustained operation over a dozen of hours. As a demonstration, we measure low-pressure hydrogen cyanide within 1.7 THz bandwidth, and obtain better than 1% precision over a terahertz in 200 ms enabled by a drastically simplified all-computational phase correction algorithm. The combination of the unprecedented setup simplicity, comb tooth resolution and high spectroscopic precision paves the way for proliferation of frequency comb spectroscopy even outside the laboratory.
△ Less
Submitted 12 May, 2019;
originally announced May 2019.
-
Black phosphorus a new saturable absorber material for ultrashort pulse generation
Authors:
Jaroslaw Sotor,
Grzegorz Sobon,
Wojciech Macherzynski,
Piotr Paletko,
Krzysztof M. Abramski
Abstract:
Low-dimensional materials, due to their versatile properties are very interesting for numerous electronics and optoelectronics applications. Recently rediscovered black phosphorus, with a graphite-like structure can be exfoliated up to the single atomic layer. In contrary to graphene it possesses a direct band gap controllable by the number of stacked atomic layers. For those reasons, it is now in…
▽ More
Low-dimensional materials, due to their versatile properties are very interesting for numerous electronics and optoelectronics applications. Recently rediscovered black phosphorus, with a graphite-like structure can be exfoliated up to the single atomic layer. In contrary to graphene it possesses a direct band gap controllable by the number of stacked atomic layers. For those reasons, it is now intensively investigated. Here we demonstrate, that black phosphorus can serve as a broadband saturable absorber and can be used for ultrashort optical pulse generation. The mechanically exfoliated ~300 nm thick layers of black phosphorus were transferred onto the fiber core and under pulsed excitation at 1560 nm wavelength its transmission increases by 4.4%. It was used to generate 272 fs-short pulses at 1550 nm and 739 fs at 1910 nm. The obtained results shows that black phosphorus can be effectively used for ultrashort pulse generation and proves its great potential to future applications.
△ Less
Submitted 18 April, 2015;
originally announced April 2015.
-
Linearly polarized, Q-switched Er-doped fiber laser based on reduced graphene oxide saturable absorber
Authors:
Grzegorz Sobon,
Jaroslaw Sotor,
Joanna Jagiello,
Rafal Kozinski,
Krzysztof Librant,
Mariusz Zdrojek,
Ludwika Lipinska,
Krzysztof M. Abramski
Abstract:
We demonstrate generation of linearly polarized pulses from a passively Q-switched Erbium-doped fiber laser. The cavity was designed using only polarization maintaining (PM) fibers and components, resulting in linearly polarized output beam with degree of polarization (DOP) at the level of 97.6%. Reduced graphene oxide (rGO) was used as a saturable absorber for Q-switched operation. The laser was…
▽ More
We demonstrate generation of linearly polarized pulses from a passively Q-switched Erbium-doped fiber laser. The cavity was designed using only polarization maintaining (PM) fibers and components, resulting in linearly polarized output beam with degree of polarization (DOP) at the level of 97.6%. Reduced graphene oxide (rGO) was used as a saturable absorber for Q-switched operation. The laser was capable of delivering 1.85us pulses with 125nJ pulse energy at 115kHz repetition rate.
△ Less
Submitted 2 December, 2012;
originally announced December 2012.
-
Graphene Oxide vs. Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser
Authors:
Grzegorz Sobon,
Jaroslaw Sotor,
Joanna Jagiello,
Rafal Kozinski,
Mariusz Zdrojek,
Marcin Holdynski,
Piotr Paletko,
Jakub Boguslawski,
Ludwika Lipinska,
Krzysztof M. Abramski
Abstract:
In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investig…
▽ More
In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investigated SA. Both provided stable, mode-locked operation with sub-400 fs soliton pulses and more than 9 nm optical bandwidth at 1560 nm center wavelength. It has been shown that GO might be successfully used as an efficient SA without the need of its reduction to rGO. Taking into account simpler manufacturing technology and the possibility of mass production, GO seems to be a good candidate as a cost-effective material for saturable absorbers for Er-doped fiber lasers.
△ Less
Submitted 4 October, 2012;
originally announced October 2012.
