-
Light guiding and optical resonances in ZnS microstructures doped with Ga or In
Authors:
B. Sotillo,
P. Fernandez,
J. Piqueras
Abstract:
The high refractive index of ZnS (about 2.4 in the visible range) makes ZnS microstructures good candidates for the fabrication of light guides and resonant microcavities. Light guiding behaviour has been studied in several ZnS structures. In particular, in this work the behavior of rods and plates has been investigated and it is has been shown that the morphology of the studied structures plays a…
▽ More
The high refractive index of ZnS (about 2.4 in the visible range) makes ZnS microstructures good candidates for the fabrication of light guides and resonant microcavities. Light guiding behaviour has been studied in several ZnS structures. In particular, in this work the behavior of rods and plates has been investigated and it is has been shown that the morphology of the studied structures plays a determinant role on the supported resonant modes. In ZnS:Ga and ZnS:In structures investigated in the present work Fabry-Perot as well as Whispering Gallery resonant modes are supported. A good agreement has been found between the experimental results and the theoretical model used to describe both types of resonances, which have been used to estimate the refractive index of the doped material. In ZnS:Ga wires with triangular cross-section a lasing effect has been observed in the blue-green range. To our knowledge, it is the first time that resonant modes in visible region have been studied in doped ZnS.
△ Less
Submitted 4 April, 2021;
originally announced April 2021.
-
Characterization of Nb22O54 microrods grown from niobium oxide powders recovered from mine tailings
Authors:
B. Sotillo,
F. A. Lopez,
L. Alcaraz,
P. Fernandez
Abstract:
In this work, the possibility of using niobium oxide recovered from tailings from the Penouta Sn-Nb-Ta deposit (located at the North of Spain) as starting material for growing microstructures is demonstrated. The properties of the starting material have been studied to understand its crystal structure, quality and purity. Recovered niobium oxide powders are mainly of TT-Nb2O5. These powders have b…
▽ More
In this work, the possibility of using niobium oxide recovered from tailings from the Penouta Sn-Nb-Ta deposit (located at the North of Spain) as starting material for growing microstructures is demonstrated. The properties of the starting material have been studied to understand its crystal structure, quality and purity. Recovered niobium oxide powders are mainly of TT-Nb2O5. These powders have been used to grow Nb22O54 microrods by an evaporation method in an argon atmosphere. Different characterization techniques (X-Ray diffraction, scanning electron microscopy, micro-Raman spectroscopy, luminescence) have been used to determine the properties of Nb22O54 microrods, mainly focusing on the crystal quality and refractive index. The present study opens the way to the transformation of waste (mine tailings) into a material of high technological value as niobium oxide, and its reintroduction into the value chain for a wide range of applications, from coatings to batteries and supercapacitors.
△ Less
Submitted 4 April, 2021;
originally announced April 2021.
-
Quantum micro-nano devices fabricated in diamond by femtosecond laser and ion irradiation
Authors:
Shane M. Eaton,
J. P. Hadden,
Vibhav Bharadwaj,
Jacopo Forneris,
Federico Picollo,
Federico Bosia,
Belen Sotillo,
Argyro N. Giakoumaki,
Ottavia Jedrkiewicz,
Andrea Chiappini,
Maurizio Ferrari,
Roberto Osellame,
Paul E. Barclay,
Paolo Olivero,
Roberta Ramponi
Abstract:
Diamond has attracted great interest as a quantum technology platform thanks to its optically active nitrogen vacancy center (NV). The NV's ground state spin can be read out optically exhibiting long spin coherence times of about 1 ms even at ambient temperatures. In addition, the energy levels of the NV are sensitive to external fields. These properties make NVs attractive as a scalable platform…
▽ More
Diamond has attracted great interest as a quantum technology platform thanks to its optically active nitrogen vacancy center (NV). The NV's ground state spin can be read out optically exhibiting long spin coherence times of about 1 ms even at ambient temperatures. In addition, the energy levels of the NV are sensitive to external fields. These properties make NVs attractive as a scalable platform for efficient nanoscale resolution sensing based on electron spins and for quantum information systems. Diamond photonics enhances optical interaction with NVs, beneficial for both quantum sensing and information. Diamond is also compelling for microfluidic applications due to its outstanding biocompatibility, with sensing functionality provided by NVs. However, it remains a significant challenge to fabricate photonics, NVs and microfluidics in diamond. In this Report, an overview is provided of ion irradiation and femtosecond laser writing, two promising fabrication methods for diamond based quantum technological devices. The unique capabilities of both techniques are described, and the most important fabrication results of color center, optical waveguide and microfluidics in diamond are reported, with an emphasis on integrated devices aiming towards high performance quantum sensors and quantum information systems of tomorrow
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Chromium Oxide Formation on Nanosecond and Femtosecond Laser Irradiated Thin Chromium Films
Authors:
L. Kotsedi,
V. Furlan,
V. Bharadwaj,
K. Kaviyarasu,
B. Sotillo,
C. B. Mtshali,
N. Matinise,
A. G. Demir,
B. Previtali,
R. Ramponi,
S. M. Eaton,
M. Maaza
Abstract:
Thin coatings of Chromium oxide have been used for applications as absorbing material in solar cells, as protections for magnetic data recording devices and as shields in flexible solar cells. Thin coatings of pure chromium were vacuum deposited on a glass substrate using hot electrons from tungsten filament. These coatings were then treated with a nanosecond and femtosecond laser in ambient condi…
▽ More
Thin coatings of Chromium oxide have been used for applications as absorbing material in solar cells, as protections for magnetic data recording devices and as shields in flexible solar cells. Thin coatings of pure chromium were vacuum deposited on a glass substrate using hot electrons from tungsten filament. These coatings were then treated with a nanosecond and femtosecond laser in ambient conditions. The microstructure, morphology and the color of the coatings treated with laser sources were modified and there was a formation of an oxide layer due to the heat dissipation on the chromium coating from the energetic photons. High-resolution scanning electron microscope studies showed the morphological evolution that are directly correlated with the laser fluence of both the nanosecond and femtosecond lasers. This morphological evolution was accompanied by the microstructural change as observed from the x-ray diffraction patterns, the chromaticity response of the coating was studied by UV-Vis spectrometer and the response of the coating in the visible region evolved with the laser fluences. The Rutherford backscattering depth profiling of the laser treated coatings revealed the diffusion of oxygen atoms in the coating as a result of laser treatment fluence.
△ Less
Submitted 17 June, 2019; v1 submitted 5 February, 2019;
originally announced February 2019.
-
Femtosecond laser inscription of nonlinear photonic circuits in Gallium Lanthanum Sulphide glass
Authors:
María Ramos Vázquez,
Belén Sotillo,
Stefano Rampini,
Vibhav Bharadwaj,
Behrad Gholipour,
Paloma Fernández,
Roberta Ramponi,
Cesare Soci,
Shane M. Eaton
Abstract:
We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the lase…
▽ More
We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the laser-induced refractive index change in GLS. Nonlinear refractive index measurements of the waveguides were performed by finding the optical switching parameters of a directional coupler, demonstrating that the nonlinear properties were preserved, evidencing that GLS is a promising platform for laser-written integrated nonlinear photonics.
△ Less
Submitted 27 August, 2018; v1 submitted 15 June, 2018;
originally announced June 2018.
-
Polarized micro-Raman studies of femtosecond laser written stress-induced optical waveguides in diamond
Authors:
B. Sotillo,
A. Chiappini,
V. Bharadwaj,
J. P. Hadden,
F. Bosia,
P. Olivero,
M. Ferrari,
R. Ramponi,
P. E. Barclay,
S. M. Eaton
Abstract:
Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond…
▽ More
Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond laser in the crystal is derived from the measured stress in the waveguides. The results help to explain the waveguide polarization sensitive guiding mechanism, as well as providing a technique for their optimization.
△ Less
Submitted 18 January, 2018; v1 submitted 24 November, 2017;
originally announced November 2017.
-
Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing
Authors:
J. P. Hadden,
V. Bharadwaj,
B. Sotillo,
S. Rampini,
R. Osellame,
J. Witmer,
H. Jayakumar,
T. T. Fernandez,
A. Chiappini,
C. Armellini,
M. Ferrari,
R. Ramponi,
P. E. Barclay,
S. M. Eaton
Abstract:
Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until…
▽ More
Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this work, we fabricate laser written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way towards on-chip optical routing of single photons between NVs and optically integrated spin-based sensing.
△ Less
Submitted 12 March, 2018; v1 submitted 20 January, 2017;
originally announced January 2017.
-
Diamond photonics platform enabled by femtosecond laser writing
Authors:
Belen Sotillo,
Vibhav Bharadwaj,
J. P. Hadden,
Masaaki Sakakura,
Andrea Chiappini,
Toney Teddy Fernandez,
Stefano Longhi,
Ottavia Jedrkiewicz,
Yasuhiko Shimotsuma,
Luigino Criante,
Roberto Osellame,
Gianluca Galzerano,
Maurizio Ferrari,
Kiyotaka Miura,
Roberta Ramponi,
Paul E. Barclay,
Shane Michael Eaton
Abstract:
We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems.
We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems.
△ Less
Submitted 21 October, 2016; v1 submitted 6 May, 2016;
originally announced May 2016.
-
Dual regimes of ion migration in high repetition rate femtosecond laser inscribed waveguides
Authors:
T. Toney Fernandez,
B. Sotillo,
J. del Hoyo,
J. A Valles,
R. Martinez Vazquez,
P. Fernandez,
J. Solis
Abstract:
Ion migration in high repetition rate femtosecond laser inscribed waveguides is currently being reported in different optical glasses. For the first time we discuss and experimentally demonstrate the presence of two regimes of ion migration found in laser written waveguides. Regime-I, corresponds to the initial waveguide formation mainly via light element migration (in our case atomic weight < 31u…
▽ More
Ion migration in high repetition rate femtosecond laser inscribed waveguides is currently being reported in different optical glasses. For the first time we discuss and experimentally demonstrate the presence of two regimes of ion migration found in laser written waveguides. Regime-I, corresponds to the initial waveguide formation mainly via light element migration (in our case atomic weight < 31u), whereas regime-II majorly corresponds to the movement of heavy elements. This behavior brings attention to a problem which has never been analyzed before and that affects laser written active waveguides in which active ions migrate changing their local spectroscopic properties. The migration of active ions may in fact detune the pre-designed optimal values of active photonic devices. This paper experimentally evidences this problem and provides solutions to avert it.
△ Less
Submitted 13 May, 2015; v1 submitted 18 December, 2014;
originally announced December 2014.
-
Controlling plasma distributions as driving forces for ion migration during fs laser writing
Authors:
Toney Teddy Fernandez,
Jan Siegel,
Jesus Hoyo,
Belen Sotillo,
Paloma Fernandez,
Javier Solis
Abstract:
The properties of structures written inside dielectrics with high repetition rate femtosecond lasers are known to depend strongly on the complex interplay of a large number of writing parameters. Recently, ion migration within the laser-excited volume has been identified as a powerful mechanism for changing the local element distribution and producing efficient optical waveguides. In this work it…
▽ More
The properties of structures written inside dielectrics with high repetition rate femtosecond lasers are known to depend strongly on the complex interplay of a large number of writing parameters. Recently, ion migration within the laser-excited volume has been identified as a powerful mechanism for changing the local element distribution and producing efficient optical waveguides. In this work it is shown that the transient plasma distribution induced during laser irradiation is a reliable monitor for predicting the final refractive index distribution of the waveguide caused by ion migration. By performing in-situ plasma emission microscopy during the writing process inside a La-phosphate glass it is found that the long axis of the plasma distribution determines the axis of ion migration, being responsible for the local refractive index increase. This observation is also valid when strong positive or negative spherical aberration is induced, greatly deforming the focal volume and inverting the index profile. Even subtle changes in the writing conditions, such as an inversion of the writing direction (quill writing effect), show up in the form of a modified plasma distribution, which manifests as a modified index distribution. Finally, it is shown that the superior control over the waveguide properties employing the slit sha** technique is caused by the more confined plasma distribution produced. The underlying reasons for this unexpected result are discussed in terms of non-linear propagation and heat accumulation.
△ Less
Submitted 14 April, 2015; v1 submitted 25 November, 2014;
originally announced November 2014.
-
Collective decision making and paradoxical games
Authors:
J. M. R. Parrondo,
L. Dinis,
E. García-Toraño,
B. Sotillo
Abstract:
We study an ensemble of individuals playing the two games of the so-called Parrondo paradox. In our study, players are allowed to choose the game to be played by the whole ensemble in each turn. The choice cannot conform to the preferences of all the players and, consequently, they face a simple frustration phenomenon that requires some strategy to make a collective decision. We consider several s…
▽ More
We study an ensemble of individuals playing the two games of the so-called Parrondo paradox. In our study, players are allowed to choose the game to be played by the whole ensemble in each turn. The choice cannot conform to the preferences of all the players and, consequently, they face a simple frustration phenomenon that requires some strategy to make a collective decision. We consider several such strategies and analyze how fluctuations can be used to improve the performance of the system.
△ Less
Submitted 1 October, 2014;
originally announced October 2014.