Showing 1–5 of 5 results for author: Soref, R A

Electrically injected GeSn lasers with peak wavelength up to 2.7 micrometer at 90 K

Authors: Yiyin Zhou, Solomon Ojo, Yuanhao Miao, Huong Tran, Joshua M. Grant, Grey Abernathy, Sylvester Amoah, Jake Bass, Gregory Salamo, Wei Du, Jifeng Liu, Joe Margetis, John Tolle, Yong-Hang Zhang, Greg Sun, Richard A. Soref, Baohua Li, Shui-Qing Yu

Abstract: GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses an… ▽ More GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses and material compositions. The cap layer total thickness was varied between 240 and 100 nm. At 10 K, a 240-nm-SiGeSn capped device had a threshold current density Jth = 0.6 kA/cm2 compared to Jth = 1.4 kA/cm2 of a device with 100-nm-SiGeSn cap due to an improved modal overlap with the GeSn gain region. Both devices had a maximum operating temperature Tmax = 100 K. Device with cap layers of Si0.03Ge0.89Sn0.08 and Ge0.95Sn0.05, respectively, were also compared. Due to less effective carrier (electron) confinement, the device with a 240-nm-GeSn cap had a higher threshold Jth = 2.4 kA/cm2 and lower maximum operating temperature Tmax = 90 K, compared to those of the 240-nm-SiGeSn capped device with Jth = 0.6 kA/cm2 and Tmax = 100 K. In the study of the active region material, the device with Ge0.85Sn0.15 active region had a 2.3 times higher Jth and 10 K lower Tmax, compared to the device with Ge0.89Sn0.11 in its active region. This is likely due to higher defect density in Ge0.85Sn0.15 rather than an intrinsic issue. The longest lasing wavelength was measured as 2682 nm at 90 K. The investigations provide guidance to the future structure design of GeSn laser diodes to further improve the performance. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Comments: 21 pages, 5 figures, and 2 tables

Electrically injected GeSn lasers on Si operating up to 100 K

Authors: Yiyin Zhou, Yuanhao Miao, Solomon Ojo, Huong Tran, Grey Abernathy, Joshua M. Grant, Sylvester Amoah, Gregory Salamo, Wei Du, Jifeng Liu, Joe Margetis, John Tolle, Yong-Hang Zhang, Greg Sun, Richard A. Soref, Baohua Li, Shui-Qing Yu

Abstract: The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si.… ▽ More The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si. A GeSn/SiGeSn heterostructure diode grown on a Si substrate was fabricated into ridge waveguide laser devices and tested under pulsed conditions. Special considerations were given for the structure design to ensure effective carrier confinement and optical confinement that lead to lasing. Lasing was observed at temperatures from 10 to 100 K with emission peaks at around 2300 nm. The minimum threshold of 598 A/cm2 was recorded at 10 K and the threshold increased to 842 A/cm2 at 77 K. The spectral linewidth of a single peak was measured as small as 0.13 nm (0.06 meV). The maximum characteristic temperature was extracted as 99 K over the temperature range of 10-77 K. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Si-based GeSn photodetectors towards mid-infrared imaging applications

Authors: Huong Tran, Thach Pham, Joe Margetis, Yiyin Zhou, Wei Dou, Perry C. Grant, Joshua M. Grant, Sattar Alkabi, Greg Sun, Richard A. Soref, John Tolle, Yong-Hang Zhang, Wei Du, Baohua Li, Mansour Mortazavi, Shui-Qing Yu

Abstract: This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of… ▽ More This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of surface passivation technique on photodiode based on in-depth analysis of dark current mechanism, effectively reducing the dark current. Moreover, mid-infrared images were obtained using GeSn photodetectors, showing the comparable image quality with that acquired by using commercial PbSe detectors. △ Less

Submitted 6 June, 2019; originally announced June 2019.

Comments: 25 pages, 8 figures

Hybrid Photonic-Plasmonic Non-blocking Broadband 5x5 Router for Optical Networks

Authors: Shuai Sun, Vikram K. Narayana, Ibrahim Sarpkaya, Joseph Crandall, Richard A. Soref, Hamed Dalir, Tarek El-Ghazawi, Volker J. Sorger

Abstract: Photonic data routing in optical networks overcomes the limitations of electronic routers with respect to data rate, latency, and energy consumption while suffering from dynamic power consumption, non-simultaneous usage of multiple wavelength channels, and large footprints. Here we show the first hybrid photonic-plasmonic, non-blocking, broadband 5x5 router. The compact footprint (<250 μm2) enable… ▽ More Photonic data routing in optical networks overcomes the limitations of electronic routers with respect to data rate, latency, and energy consumption while suffering from dynamic power consumption, non-simultaneous usage of multiple wavelength channels, and large footprints. Here we show the first hybrid photonic-plasmonic, non-blocking, broadband 5x5 router. The compact footprint (<250 μm2) enables high operation speed (480 GHz) requiring only 82 fJ/bit (1.9 dB) of averaged energy consumption (routing loss). The router supports multi-wavelength up to 206 nm in the telecom band. Having a data-capacity of >70 Tbps, thus demonstrating key features required by future high data-throughput optical networks. △ Less

Submitted 14 November, 2017; v1 submitted 18 August, 2017; originally announced August 2017.

Comments: 12 pages, 4 figures

Journal ref: IEEE Photonics Journal, Volume: PP, Issue: 99, Page: 1-1 (2017)

A compact plasmonic MOS-based 2x2 electro-optic switch

Authors: Chenran Ye, Ke Liu, Richard A. Soref, Volker J. Sorger

Abstract: We report on a three-waveguide electro-optic switch for compact photonic integrated circuits and data routing applications. The device features a plasmonic metal-oxide-semiconductor (MOS) mode for enhanced light-matter-interactions. The switching mechanism originates from a capacitor-like design where the refractive index of the active medium, Indium-Tin-Oxide, is altered via shifting the plasma f… ▽ More We report on a three-waveguide electro-optic switch for compact photonic integrated circuits and data routing applications. The device features a plasmonic metal-oxide-semiconductor (MOS) mode for enhanced light-matter-interactions. The switching mechanism originates from a capacitor-like design where the refractive index of the active medium, Indium-Tin-Oxide, is altered via shifting the plasma frequency due to carrier accumulation inside the waveguide-based MOS structure. This light manipulation mechanism controls the transmission direction of transverse magnetic polarized light into either a CROSS or BAR waveguide port. The extinction ratio of 18 dB (7) dB for the CROSS (BAR) state, respectively, is achieved via a gating voltage bias. The ultrafast broadband fJ/bit device allows for seamless integration with Siliconon- Insulator platforms to for low-cost manufacturing. △ Less

Submitted 7 June, 2015; originally announced June 2015.

Comments: 10 pages,6 figures