-
Extensional Viscosity of Immiscible Polymers Multinanolayer Films: Signature of the Interphase
Authors:
Anna Dmochowska,
Jorge Peixinho,
Cyrille Sollogoub,
Guillaume Miquelard-Garnier
Abstract:
The measurement of interfacial mechanical or rheological properties in polymer blends is a challenging task, as well as providing a quantitative link between these properties and the interfacial nanostructure. Here, we perform a systematic study of the extensional rheology of multilayer films of an immsicible polymer pair, polystyrene and poly(methyl methacrylate). We take advantage of multinanola…
▽ More
The measurement of interfacial mechanical or rheological properties in polymer blends is a challenging task, as well as providing a quantitative link between these properties and the interfacial nanostructure. Here, we perform a systematic study of the extensional rheology of multilayer films of an immsicible polymer pair, polystyrene and poly(methyl methacrylate). We take advantage of multinanolayer coextrusion to increase the number of interfaces up to thousands, consequently magnifying the interfacial response of the films. The transient elongational response is compared to an addivity rule model based on the summation of the contribution of each polymer as well as the interfacial one. At low strain rates, the model reproduces the transient extensional viscosity up to strain-thinning, while at larger ones, the extra stress exceeds the prediction based on constant interfacial tension. This extra-contribution is attributed to an interphase modulus on the order of 1-10 MPa, which increases with strain rate following a power-law with an exponent 1/3. Extensional rheology of multinanolayer films is then an efficient combination to go beyond interfacial tension and measure quantitatively the interfacial rheology of immiscible polymer blends.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Instability and rupture of sheared viscous liquid nanofilms
Authors:
Vira Dhaliwal,
Christian Pedersen,
Kheireddine Kadri,
Guillaume Miquelard-Garnier,
Cyrille Sollogoub,
Jorge Peixinho,
Thomas Salez,
Andreas Carlson
Abstract:
Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbation…
▽ More
Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbations that can trigger film rupture, but they do not significantly affect the growth rate of the perturbations. The film rupture time can be predicted from a linear stability analysis of the governing thin film equation, by considering the most unstable wavelength and the thermal roughness. Furthermore, applying a sufficiently large unidirectional shear can stabilise large perturbations, creating a finite-amplitude travelling wave instead of film rupture. In contrast, in three dimensions, unidirectional shear does not inhibit rupture, as perturbations are not suppressed in the direction perpendicular to the applied shear. However, if the direction of shear varies in time, the growth of large perturbations is prevented in all directions, and rupture can hence be impeded.
△ Less
Submitted 27 June, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Dewetting dynamics of sheared thin polymer films: an experimental study
Authors:
Anna Dmochowska,
Jorge Peixinho,
Cyrille Sollogoub,
Guillaume Miquelard-Garnier
Abstract:
An experimental investigation is reported on the effect of shear on the bursting of molten ultra-thin polymer films embedded in an immiscible matrix. By using an optical microscope coupled with a shearing hotstage, the dewetting dynamics, i.e. the growth of dewetting holes is monitored over time at various shear rates. It is observed that their circularity is modified by shear and that for all tem…
▽ More
An experimental investigation is reported on the effect of shear on the bursting of molten ultra-thin polymer films embedded in an immiscible matrix. By using an optical microscope coupled with a shearing hotstage, the dewetting dynamics, i.e. the growth of dewetting holes is monitored over time at various shear rates. It is observed that their circularity is modified by shear and that for all temperatures and thicknesses studied, the growth speed of the formed holes rapidly increases with increasing shear rate. A model balancing capillary forces and viscous dissipation while taking into account shear-thinning is then proposed and captures the main features of the experimental data, such as the ellipsoid shape of the holes and the faster dynamics in the direction parallel to the shear. This research will help to understand the instabilities occurring during processing of layered polymeric structures, such as multilayer coextrusion.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Dewetting of a thin polymer film under shear
Authors:
Kheireddine Kadri,
Jorge Peixinho,
Thomas Salez,
Guillaume Miquelard-Garnier,
Cyrille Sollogoub
Abstract:
The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictio…
▽ More
The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictions. With the addition of shear, three regimes have then been evidenced as a function of the shear rate. In the case of low shear rates the rupture is delayed when compared to the no-shear problem, while at higher shear rates it is even suppressed: the perturbed interface goes back to its unperturbed state over time. In between these two limiting regimes, a transient one in which shear and vdW forces balance each other, leading to a non-monotonic temporal evolution of the perturbed interface, has been identified. While a linear analysis is sufficient to describe the rupture time in the absence of shear, the nonlinearities appear to be essential otherwise.
△ Less
Submitted 21 July, 2021;
originally announced July 2021.
-
Influence of outer-layer finite-size effects on the rupture kinetics of a thin polymer film embedded in an immiscible matrix
Authors:
Mohamed S. Chebil,
Joshua D. McGraw,
Thomas Salez,
Cyrille Sollogoub,
Guillaume Miquelard-Garnier
Abstract:
In capillary-driven fluid dynamics, simple departures from equilibrium offer the chance to quantitatively model the resulting relaxations. These dynamics in turn provide insight on both practical and fundamental aspects of thin-film hydrodynamics. In this work, we describe a model trilayer dewetting experiment elucidating the effect of solid, no-slip confining boundaries on the bursting of a liqui…
▽ More
In capillary-driven fluid dynamics, simple departures from equilibrium offer the chance to quantitatively model the resulting relaxations. These dynamics in turn provide insight on both practical and fundamental aspects of thin-film hydrodynamics. In this work, we describe a model trilayer dewetting experiment elucidating the effect of solid, no-slip confining boundaries on the bursting of a liquid film in a viscous environment. This experiment was inspired by an industrial polymer processing technique, multilayer coextrusion, in which thousands of alternating layers are stacked atop one another. When pushed to the nanoscale limit, the individual layers are found to break up on time scales shorter than the processing time. To gain insight on this dynamic problem, we here directly observe the growth rate of holes in the middle layer of the trilayer films described above, wherein the distance between the inner film and solid boundary can be orders of magnitude larger than its thickness. In otherwise identical experimental conditions, thinner films break up faster than thicker ones. This observation is found to agree with a scaling model that balances capillary driving power and viscous dissipation with, crucially, a no-slip boundary condition at the solid substrate/viscous environment boundary. In particular, even for the thinnest middle-layers, no finite-size effect is needed to explain the data. The dynamics of hole growth is captured by a single master curve over four orders of magnitude in the dimensionless hole radius and time, and is found to agree well with predictions including analytic expressions for the dissipation.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
arXiv:1703.09517
[pdf]
cond-mat.soft
cond-mat.mes-hall
cond-mat.mtrl-sci
physics.chem-ph
physics.data-an
Existence of a critical layer thickness in PS/PMMA nanolayered films
Authors:
Adrien Bironeau,
Thomas Salez,
Guillaume Miquelard-Garnier,
Cyrille Sollogoub
Abstract:
An experimental study was carried out to investigate the existence of a critical layer thickness in nanolayer coextrusion, under which no continuous layer is observed. Polymer films containing thousands of layers of alternating polymers with individual layer thicknesses below 100 nm have been prepared by coextrusion through a series of layer multiplying elements. Different films composed of altern…
▽ More
An experimental study was carried out to investigate the existence of a critical layer thickness in nanolayer coextrusion, under which no continuous layer is observed. Polymer films containing thousands of layers of alternating polymers with individual layer thicknesses below 100 nm have been prepared by coextrusion through a series of layer multiplying elements. Different films composed of alternating layers of poly(methyl methacrylate) (PMMA) and polystyrene (PS) were fabricated with the aim to reach individual layer thicknesses as small as possible, varying the number of layers, the mass composition of both components and the final total thickness of the film. Films were characterized by atomic force microscopy (AFM) and a statistical analysis was used to determine the distribution in layer thicknesses and the continuity of layers. For the PS/PMMA nanolayered systems, results point out the existence of a critical layer thickness around 10 nm, below which the layers break up. This critical layer thickness is reached regardless of the processing route, suggesting it might be dependent only on material characteristics but not on process parameters. We propose this breakup phenomenon is due to small interfacial perturbations that are amplified by (van der Waals) disjoining forces.
△ Less
Submitted 8 May, 2017; v1 submitted 28 March, 2017;
originally announced March 2017.