Showing 1–22 of 22 results for author: Solanki, N

Tipler Naked Singularities in $N$ Dimensions

Authors: Kharanshu N. Solanki, Karim Mosani, Omkar Deshpande, Pankaj S. Joshi

Abstract: A spacetime singularity, identified by the existence of incomplete causal geodesics in the spacetime, is called a (Tipler) strong curvature singularity if the volume form acting on independent Jacobi fields along causal geodesics vanishes in the approach of the singularity. It is called naked if at least one of these causal geodesics is past incomplete. Here, we study the formation of strong curva… ▽ More A spacetime singularity, identified by the existence of incomplete causal geodesics in the spacetime, is called a (Tipler) strong curvature singularity if the volume form acting on independent Jacobi fields along causal geodesics vanishes in the approach of the singularity. It is called naked if at least one of these causal geodesics is past incomplete. Here, we study the formation of strong curvature naked singularities arising from spherically symmetric gravitational collapse of general type-I matter fields in an arbitrarily finite number of dimensions. In the spirit of Joshi and Dwivedi [26], and Goswami and Joshi [31], we first construct regular initial data in terms of matter variables and geometric quantities, subject to the dominant and null energy conditions. Using this initial data, we derive two distinct (but not mutually exclusive) conditions, which we call the positive root condition (PRC) and the simple positive root condition (SPRC), that serve as necessary and sufficient conditions, respectively, for the existence of naked singularities. In doing so, we generalize the results of [26] and [31]. We further restrict the PRC and the SPRC by imposing the curvature growth condition (CGC) of Clarke and Krolak [24] on all causal curves that satisfy the causal convergence condition. The CGC gives a sufficient condition for the naked singularities implying the PRC and implied by the SPRC, to be of strong curvature type; thereby also implying the inextendibility of the spacetime. Using the CGC, we extend the results of [28] (that hold for dimension $N=4$) to the case $N=5$, showing that strong curvature naked singularities can occur in this case. However, for the case $N\geq6$, we show that past-incomplete causal curves that identify naked singularities do not satisfy the CGC. These results shed light on the validity of the cosmic censorship conjectures in arbitrary dimensions. △ Less

Submitted 11 July, 2024; v1 submitted 3 April, 2024; originally announced April 2024.

Comments: Final version (accepted in Class. Quant. Grav.)

Soft Theorems and Memory Effects at Finite Temperatures

Authors: Divyesh N. Solanki, Srijit Bhattacharjee

Abstract: We study the soft theorems for photons and gravitons at finite temperatures using the thermofield dynamics approach. The soft factors lose universality at finite temperatures as the soft amplitudes depend on the nature (or spin) of the particles participating in the scattering processes. However, at low temperatures, a universal behaviour is observed in the cross-section of the soft processes. Fur… ▽ More We study the soft theorems for photons and gravitons at finite temperatures using the thermofield dynamics approach. The soft factors lose universality at finite temperatures as the soft amplitudes depend on the nature (or spin) of the particles participating in the scattering processes. However, at low temperatures, a universal behaviour is observed in the cross-section of the soft processes. Further, we obtain the thermal contribution to the electromagnetic and gravitational memory effects and show that they are related to the soft factors consistently. The expected zero temperature results are obtained from the soft factors and memories. The thermal effects in soft theorems and memories seem to be sensitive to the spin of the particles involved in scattering. △ Less

Submitted 6 January, 2024; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: matches with the version published in Eur. Phys. J. C

Are Physical Theories Incommensurable?

Authors: Kharanshu Solanki

Abstract: This paper examines the incommensurability thesis - one of the most important and controversial ideas to emerge from the simultaneous work of Kuhn and Feyerabend. In the first half, I discuss three aspects of incommensurability - methodological incommensurability (the view that each paradigm supplies different standards of evaluation), observational incommensurability (the view that the theories w… ▽ More This paper examines the incommensurability thesis - one of the most important and controversial ideas to emerge from the simultaneous work of Kuhn and Feyerabend. In the first half, I discuss three aspects of incommensurability - methodological incommensurability (the view that each paradigm supplies different standards of evaluation), observational incommensurability (the view that the theories we accept alter how we see the world), and finally, semantic incommensurability (which claims that as paradigms change, the very meanings of central theoretical terms also change). In the latter half, I tackle the general arguments of physicists against incommensurability by primarily considering the so called unifying cube of physics. I show that the cube of physics does not get rid of incommensurability, but rather favours it. △ Less

Submitted 21 May, 2022; originally announced May 2022.

Comments: 8 pages, 1 figure. Keywords: Incommensurability; Physics; Explanation; Reduction; Transition; Unification

Shadows and precession of orbits in rotating Janis-Newman-Winicour spacetime

Authors: Divyesh N. Solanki, Parth Bambhaniya, Dipanjan Dey, Pankaj S. Joshi, Kamlesh N. Pathak

Abstract: In this paper, we construct the rotating Janis-Newman-Winicour (JNW) naked singularity spacetime using Newman-Janis Algorithm (NJA). We analyse NJA with and without complexification methods and find that the energy conditions do satisfied when we skip the complexification step. We study the shadows cast by rotating JNW naked singularity and compare them with the shadows cast by the Kerr black hole… ▽ More In this paper, we construct the rotating Janis-Newman-Winicour (JNW) naked singularity spacetime using Newman-Janis Algorithm (NJA). We analyse NJA with and without complexification methods and find that the energy conditions do satisfied when we skip the complexification step. We study the shadows cast by rotating JNW naked singularity and compare them with the shadows cast by the Kerr black hole. We find that the shadow of the rotating naked singularity can be distinguished from the shadow of the Kerr black hole. While we analyse the precession of timelike bound orbits in rotating JNW spacetime, we find that it can have a negative (or opposite) precession, which is not present in the Kerr black hole case. These novel signatures of the shadow and orbital precession in rotating JNW naked singularity spacetime could be important in the context of the recent observation of the shadow of the M87 galactic center and the stellar dynamics of `S-stars' around Milkyway galactic center. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Comments: 14 pages, 13 figures

Post-Newtonian properties of EMRI with Power Law Potential

Authors: Chinmay N. Gandevikar, Divyesh N. Solanki, Dipanjan Dey

Abstract: There are many astrophysical scenarios where extreme mass ratio inspiral (EMRI) binaries can be surrounded by matter distribution. The distribution of mass can affect the dynamical properties (e.g. orbital frequency, average energy radiation rate, etc.) of the EMRI. In this matter distribution, instead of Kepler-Newton potential, one may consider a more general form of potential i.e. power law pot… ▽ More There are many astrophysical scenarios where extreme mass ratio inspiral (EMRI) binaries can be surrounded by matter distribution. The distribution of mass can affect the dynamical properties (e.g. orbital frequency, average energy radiation rate, etc.) of the EMRI. In this matter distribution, instead of Kepler-Newton potential, one may consider a more general form of potential i.e. power law potential. Moreover, due to the power law potential, the velocity profile of test particles does not fall as much as that predicted by Kepler-Newton potential and this feature of the velocity profile may be observationally important. In this study, we have obtained the first post-Newtonian (1PN) expressions for dynamical quantities and the average energy radiation rate from the circular orbit EMRI which is surrounded by a matter distribution. We show that the energy radiation rate and orbital frequency of EMRI can be significantly different in the presence of power law potential as compared to that in the Kepler-Newton potential, signatures of which may be observed in gravitational waves from EMRI. △ Less

Submitted 26 January, 2021; originally announced January 2021.

Comments: 12 pages, 8 figures

Shadows and negative precession in non-Kerr spacetime

Authors: Parth Bambhaniya, Dipanjan Dey, Ashok B. Joshi, Pankaj S. Joshi, Divyesh N. Solanki, Aadarsh Mehta

Abstract: It is now known that the shadow is not only the property of a black hole, it can also be cast by other compact objects like naked singularities. However, there exist some novel features of the shadow of the naked singularities which are elaborately discussed in some recent articles. In the earlier literature, it is also shown that a naked singularity may admit negative precession of bound timelike… ▽ More It is now known that the shadow is not only the property of a black hole, it can also be cast by other compact objects like naked singularities. However, there exist some novel features of the shadow of the naked singularities which are elaborately discussed in some recent articles. In the earlier literature, it is also shown that a naked singularity may admit negative precession of bound timelike orbits which cannot be seen in Schwarzschild and Kerr black hole spacetimes. This distinguishable behavior of timelike bound orbit in the presence of the naked singularity along with the novel features of the shadow may be useful to distinguish between a black hole and a naked singularity observationally. However, in this paper, it is shown that deformed Kerr spacetime can allow negative precession of bound timelike orbits when the central singularity of that spacetime is naked. We also show that negative precession and shadow both can exist simultaneously in deformed Kerr naked singularity spacetime. Therefore, any observational evidence of negative precession of bound orbits, along with the central shadow may indicate the presence of a deformed Kerr naked singularity. △ Less

Submitted 11 January, 2021; originally announced January 2021.

Comments: 13 pages, 20 figures

Journal ref: Phys. Rev. D 103, 084005 (2021)

Precession of timelike bound orbits in Kerr spacetime

Authors: Parth Bambhaniya, Divyesh N. Solanki, Dipanjan Dey, Ashok B. Joshi, Pankaj S. Joshi, Vishwa Patel

Abstract: Astrometric observations of S-stars provide a unique opportunity to probe the nature of Sagittarius-A* (Sgr-A*). In view of this, it has become important to understand the nature and behavior of timelike bound trajectories of particles around a massive central object. It is known now that whereas the Schwarzschild black hole does not allow the negative precession for the S-stars, the naked singula… ▽ More Astrometric observations of S-stars provide a unique opportunity to probe the nature of Sagittarius-A* (Sgr-A*). In view of this, it has become important to understand the nature and behavior of timelike bound trajectories of particles around a massive central object. It is known now that whereas the Schwarzschild black hole does not allow the negative precession for the S-stars, the naked singularity spacetimes can admit the positive as well as negative precession for the bound timelike orbits. In this context, we study the perihelion precession of a test particle in the Kerr spacetime geometry. Considering some approximations, we investigate whether the timelike bound orbits of a test particle in Kerr spacetime can have negative precession. In this paper, we only consider low eccentric timelike equatorial orbits. With these considerations, we find that in Kerr spacetimes, negative precession of timelike bound orbits is not allowed. △ Less

Submitted 23 July, 2020; originally announced July 2020.

Comments: 12 pages, 18 figures

Revealing the role of nitrogen on hydride nucleation and stability in pure niobium using first principles calculations

Authors: P. Garg, S. Balachandran, I. Adlakha, P. J. Lee, T. R. Bieler, K. N. Solanki

Abstract: Niobium provides the basis for all superconducting radio frequency (SRF) cavities in use, however, hydrogen is readily absorbed by niobium during cavity fabrication and subsequent niobium hydride precipitation when cooled to cryogenic temperatures degrades its superconducting properties. In the last few years the addition of dopant elements such as nitrogen has been experimentally shown to signifi… ▽ More Niobium provides the basis for all superconducting radio frequency (SRF) cavities in use, however, hydrogen is readily absorbed by niobium during cavity fabrication and subsequent niobium hydride precipitation when cooled to cryogenic temperatures degrades its superconducting properties. In the last few years the addition of dopant elements such as nitrogen has been experimentally shown to significantly improve the quality factor of niobium SRF cavities. One of the contributors to Q degradation can be presence of hydrides, however, the underlying mechanisms associated with the kinetics of hydrogen and the thermodynamic stability of hydride precipitates in the presence of dopants are not well known. Using first principles calculations, the effects of nitrogen on the energetic preference for hydrogen to occupy interstitial sites and hydride stability are examined. In particular, the presence of nitrogen significantly increased the energy barrier for hydrogen diffusion from one tetrahedral site to another interstitial site. Furthermore, the beta niobium hydride precipitate became energetically unstable upon addition of nitrogen in the niobium matrix. Through electronic density of states and valence charge transfer calculations, nitrogen showed a strong tendency to accumulate charge around itself, thereby decreasing the strength of covalent bonds between niobium and hydrogen atoms leading to a very unstable state for hydrogen and hydrides. These calculations show that the presence of nitrogen during processing plays a critical role in controlling hydride precipitation and subsequent SRF properties. △ Less

Submitted 11 September, 2018; v1 submitted 11 September, 2018; originally announced September 2018.

Rederiving the Upper Bound for Halving Edges using Cardano's Formula

Authors: Pintu Chauhan, Manjish Pal, Napendra Solanki

Abstract: In this paper we rederive an old upper bound on the number of halving edges present in the halving graph of an arbitrary set of $n$ points in 2-dimensions which are placed in general position. We provide a different analysis of an identity discovered by Andrejak et al, to rederive this upper bound of $O(n^{4/3})$. In the original paper of Andrejak et al. the proof is based on a naive analysis wher… ▽ More In this paper we rederive an old upper bound on the number of halving edges present in the halving graph of an arbitrary set of $n$ points in 2-dimensions which are placed in general position. We provide a different analysis of an identity discovered by Andrejak et al, to rederive this upper bound of $O(n^{4/3})$. In the original paper of Andrejak et al. the proof is based on a naive analysis whereas in this paper we obtain the same upper bound by tightening the analysis thereby opening a new door to derive these upper bounds using the identity. Our analysis is based on a result of Cardano for finding the roots of a cubic equation. We believe that our technique has the potential to derive improved bounds on the number of halving edges. △ Less

Submitted 11 February, 2018; originally announced February 2018.

ACM Class: I.3.5; G.2.1

Quantifying structure-property relationships during resistance spot welding of an aluminum 6061-T6 joint

Authors: S. A. Turnage, K. A. Darling, M. Rajagopalan, W. R. Whittington, M. A. Tschopp, P. Peralta, K. N. Solanki

Abstract: Microstructure-property relationships of resistance spot welded 6061-T6 aluminum alloy lap joints were investigated via mechanical testing and microscopy techniques. Quasi-static tensile and novel shear punch tests were employed to measure the mechanical properties of the distinct weld regions. Quasi-static tensile and shear punch tests revealed constantly decreasing strength and ductility as the… ▽ More Microstructure-property relationships of resistance spot welded 6061-T6 aluminum alloy lap joints were investigated via mechanical testing and microscopy techniques. Quasi-static tensile and novel shear punch tests were employed to measure the mechanical properties of the distinct weld regions. Quasi-static tensile and shear punch tests revealed constantly decreasing strength and ductility as the weld center was approached. For instance, the ultimate tensile strength of the fusion zone decreased by ~52% from the parent material (341 MPa to 162 MPa) while the yield strength decreased by ~62% (312 MPa to 120 MPa). The process-induced microstructures were analyzed with scanning electron microscopy and optical microscopy to elucidate the underlying cause of the reduced mechanical properties. Fractography reveals void growth from particles being the dominant damage mechanism in the parent material as compared to void nucleation in the fusion zone. Overall, significant changes in the mechanical behavior across the weld are the result of a change in microstructure congruent with a loss of T6 condition (precipitate coarsening). △ Less

Submitted 13 May, 2016; originally announced May 2016.

Dislocation core properties of β-tin: A first-principles study

Authors: M. A. Bhatia, M. Azarnoush, I. Adlakha, G. Lu, K. N. Solanki

Abstract: Dislocation core properties of tin (β-Sn) were investigated using the semi-discrete variational Peierls-Nabarro model (SVPN). The SVPN model, which connects the continuum elasticity treatment of the long-range strain field around a dislocation with an approximate treatment of the dislocation core, was employed to calculate various core properties, including the core energetics, widths, and Peierls… ▽ More Dislocation core properties of tin (β-Sn) were investigated using the semi-discrete variational Peierls-Nabarro model (SVPN). The SVPN model, which connects the continuum elasticity treatment of the long-range strain field around a dislocation with an approximate treatment of the dislocation core, was employed to calculate various core properties, including the core energetics, widths, and Peierls stresses for different dislocation structures. The role of core energetics and properties on dislocation character and subsequent slip behavior in β-Sn was investigated. For instance, this work shows that a widely spread dislocation core on the {110} plane as compared to dislocations on the {100} and {101} planes. Physically, the narrowing or widening of the core will significantly affect the mobility of dislocations as the Peierls stress is exponentially related to the dislocation core width in β-Sn. In general, the Peierls stress for the screw dislocation was found to be orders of magnitude higher than the edge dislocation, i.e., the more the edge component of a mixed dislocation, the greater the dislocation mobility (lower the Peierls stress). The largest Peierls stress observed was 365 MPa for the dislocation on the {101} plane. Furthermore, from the density plot, we see a double peak for the 0deg (screw) and 30deg dislocations which suggests the dissociation of dislocations along these planes. Thus, for the {101} <-101> slip system, we observed dislocation dissociation into three partials with metastable states. Overall, this work provides qualitative insights that aid in understanding the plastic deformation in β-Sn. △ Less

Submitted 19 January, 2017; v1 submitted 28 April, 2016; originally announced April 2016.

Critical assessment of hydrogen effects on the slip transmission across grain boundaries in α-Fe

Authors: I. Adlakha, K. N. Solanki

Abstract: Grain boundaries (GBs) play a fundamental role in the strengthening mechanism of crystalline structures by acting as an impediment to dislocation motion. However, the presence of an aggressive environment such as hydrogen increases the susceptibility to intergranular fracture. Further, there is a lack of systematic investigations exploring the role of hydrogen on the dislocation-grain-boundary (DG… ▽ More Grain boundaries (GBs) play a fundamental role in the strengthening mechanism of crystalline structures by acting as an impediment to dislocation motion. However, the presence of an aggressive environment such as hydrogen increases the susceptibility to intergranular fracture. Further, there is a lack of systematic investigations exploring the role of hydrogen on the dislocation-grain-boundary (DGB) interactions. Thus, in this work, the effect of hydrogen on the interactions between a screw dislocation and <111> tilt GBs in α-Fe were examined. Our simulations reveal that the outcome of the DGB interaction strongly depends on the underlying GB dislocation network. Further, there exists a strong correlation between the GB energy and the energy barrier for slip transmission. In other words, GBs with lower interfacial energy demonstrate a higher barrier for slip transmission. The introduction of hydrogen along the GB causes the energy barrier for slip transmission to increase consistently for all of the GBs examined. The energy balance for a crack initiation in the presence of hydrogen was examined with the help of our observations and previous findings. It was found that the presence of hydrogen increases the strain energy stored within the GB which could lead to a transgranular-to-intergranular fracture mode transition. △ Less

Submitted 1 December, 2015; originally announced December 2015.

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

Authors: M. A. Bhatia, S. N. Mathaudhu, K. N. Solanki

Abstract: Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to other structural Al-, Ti- and Fe-based alloys. However, recent studies have demonstrated high-specific-strength in a number of nanocrystalline Mg-alloys. Even so,… ▽ More Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to other structural Al-, Ti- and Fe-based alloys. However, recent studies have demonstrated high-specific-strength in a number of nanocrystalline Mg-alloys. Even so, applications of these alloys would be restricted to low-temperature automotive components due to microstructural instability under high temperature creep loading. Hence, this work aims to gain a better understanding of creep and associated deformation behavior of columnar nanocrystalline Mg and Mg-yttrium (Y) (up to 3at.%Y(10wt.%Y)) with a grain size of 5 nm and 10 nm. Using molecular dynamics (MD) simulations, nanocrystalline magnesium with and without local concentrations of yttrium is subjected to constant-stress loading ranging from 0 to 500 MPa at different initial temperatures ranging from 473 to 723 K. In pure Mg, the analyses of the diffusion coefficient and energy barrier reveal that at lower temperatures (i.e., T < ~423K) the contribution of grain boundary diffusion to the overall creep deformation is stronger that the contribution of lattice diffusion. However, at higher temperatures (T > ~423K) lattice diffusion dominates the overall creep behavior. Interestingly, for the first time, we have shown that the(101-1),(101-2),(101-3) and (101-6) boundary sliding energy is reduced with the addition of yttrium. This softening effect in the presence of yttrium suggests that the experimentally observed high temperature beneficial effects of yttrium addition is likely to be attributed to some combination of other reported creep strengthening mechanisms or phenomena such as formation of stable yttrium oxides at grain boundaries or increased forest dislocation-based hardening. △ Less

Submitted 23 June, 2015; originally announced June 2015.

Comments: 17 pages, 11 figures

Binding of He$_n$V Clusters to $α$-Fe Grain Boundaries

Authors: M. A. Tschopp, F. Gao, K. N. Solanki

Abstract: The objective of this research is to explore the formation/binding energetics and length scales associated with the interaction between He$_n$V clusters and grain boundaries in bcc $α$-Fe. In this work, we calculated formation/binding energies for 1-8 He atoms in a monovacancy at all potential grain boundary sites within 15 Å of the ten grain boundaries selected (122106 simulations total). The pre… ▽ More The objective of this research is to explore the formation/binding energetics and length scales associated with the interaction between He$_n$V clusters and grain boundaries in bcc $α$-Fe. In this work, we calculated formation/binding energies for 1-8 He atoms in a monovacancy at all potential grain boundary sites within 15 Å of the ten grain boundaries selected (122106 simulations total). The present results provide detailed information about the interaction energies and length scales of 1--8 He atoms with grain boundaries for the structures examined. A number of interesting new findings emerge from the present study. First, the $\Sigma3$(112) `twin' GB has significantly lower binding energies for all He$_n$V clusters than all other boundaries in this study. For all grain boundary sites, the effect of the local environment surrounding each site on the He$_n$V formation and binding energies decreases with an increasing number of He atoms in the He$_n$V cluster. Based on the calculated dataset, we formulated a model to capture the evolution of the formation and binding energy of He$_n$V clusters as a function of distance from the GB center, utilizing only constants related to the maximum binding energy and the length scale. △ Less

Submitted 31 January, 2014; v1 submitted 22 January, 2014; originally announced January 2014.

Comments: arXiv admin note: substantial text overlap with arXiv:1309.6337

Journal ref: Journal of Applied Physics 115 (2014) 233501

Atomic-scale analysis of liquid-gallium embrittlement of aluminum grain boundaries

Authors: M. Rajagopalan, M. A. Bhatia, K. N. Solanki, M. A. Tschopp, D. Srolovitz

Abstract: In this work, we explore the role of atomistic-scale energetics on liquid-metal embrittlement of Al due to Ga. Ab initio and molecular mechanics were employed to probe the binding energies of vacancies and segregation energies of Ga for <100>, <110> and <111> STGBs in Al. We found that the GB local arrangements and resulting structural units have a significant influence on the magnitude of vacancy… ▽ More In this work, we explore the role of atomistic-scale energetics on liquid-metal embrittlement of Al due to Ga. Ab initio and molecular mechanics were employed to probe the binding energies of vacancies and segregation energies of Ga for <100>, <110> and <111> STGBs in Al. We found that the GB local arrangements and resulting structural units have a significant influence on the magnitude of vacancy binding energies. For example, the mean vacancy binding energy for <100>, <110>, and <111> STGBs at 1st layer was found to be -0.63 eV, -0.26 eV, and -0.60 eV. However, some GBs exhibited vacancy binding energies closer to bulk values, indicating interfaces with zero sink strength, i.e., these GBs may not provide effective pathways for vacancy diffusion. The results from the present work showed that the GB structure and the associated free volume also play significant roles in Ga segregation and the subsequent embrittlement of Al. The Ga mean segregation energy for <100>, <110> and <111> STGBs at 1st layer was found to be -0.23 eV, -0.12 eV and -0.24 eV, respectively, suggesting a stronger correlation between the GB structural unit, its free volume, and segregation behavior. Furthermore, as the GB free volume increased, the difference in segregation energies between the 1st layer and the 0th layer increased. Thus, the GB character and free volume provide an important key to understanding the degree of anisotropy in various systems. The overall characteristic Ga absorption length scale was found to be about ~10, 8, and 12 layers for <100>, <110>, and <111> STGBs, respectively. Also, a few GBs of different tilt axes with relatively high segregation energies (between 0 and -0.1 eV) at the boundary were also found. This finding provides a new atomistic perspective to the GB engineering of materials with smart GB networks to mitigate or control LME and more general embrittlement phenomena in alloys. △ Less

Submitted 22 January, 2014; v1 submitted 7 December, 2013; originally announced December 2013.

Grain boundary segregation of interstitial and substitutional impurity atoms in alpha-iron

Authors: M. Rajagopalan, M. A. Tschopp, K. N. Solanki

Abstract: The macroscopic behavior of polycrystalline materials is influenced by the local variation of properties caused by the presence of impurities and defects. The effect of these impurities at the atomic scale can either embrittle or strengthen grain boundaries within. Thus, it is imperative to understand the energetics associated with segregation to design materials with desirable properties. Here, m… ▽ More The macroscopic behavior of polycrystalline materials is influenced by the local variation of properties caused by the presence of impurities and defects. The effect of these impurities at the atomic scale can either embrittle or strengthen grain boundaries within. Thus, it is imperative to understand the energetics associated with segregation to design materials with desirable properties. Here, molecular statics simulations were employed to analyze the energetics associated with the segregation of various elements (He, H, C, P, and V) to four <100> (Sigma 5 and 13 GBs) and six <110> (Sigma 3,9,and 11 GBs) symmetric tilt grain boundaries in alpha-Fe. This knowledge is important for designing stable interfaces in harsh environments. Simulation results show that the local atomic arrangements within the GB region and the resulting structural units have a significant influence on the magnitude of binding energies of the impurity (interstitial and substitutional) atoms. This data also suggests that the site-to-site variation of energies within a boundary is substantial. Comparing the binding energies of all ten boundaries shows that the Sigma 3(112) boundary possesses a much smaller binding energy for all interstitial and substitutional impurity atoms among the boundaries examined here. Additionally, based on the Rice-Wang model, our total energy calculations show that V has a significant beneficial effect on the Fe grain boundary cohesion, while P has a detrimental effect on grain boundary cohesion, much weaker than H and He. This is significant for applications where extreme environmental damage generates lattice defects and grain boundaries act as sinks for both interstitial and substitutional impurity atoms. This methodology provides us with a tool to effectively identify the local as well as the global segregation behavior which can influence the GB cohesion. △ Less

Submitted 18 October, 2013; v1 submitted 12 October, 2013; originally announced October 2013.

Comments: arXiv admin note: text overlap with arXiv:1310.2643

Journal ref: JOM (Journal of Materials) 66 (2014) 129-138

Energetics of vacancy segregation to symmetric tilt grain boundaries in HCP materials

Authors: M. A. Bhatia, K. N. Solanki

Abstract: Molecular static simulations of 190 symmetric tilt grain boundaries in HCP metals were used to understand the energetics of vacancy segregation, which is important for designing stable interfaces in harsh environments. Simulation results show that the local arrangements of grain boundaries and the resulting structural units have a significant influence on the magnitude of vacancy binding energies,… ▽ More Molecular static simulations of 190 symmetric tilt grain boundaries in HCP metals were used to understand the energetics of vacancy segregation, which is important for designing stable interfaces in harsh environments. Simulation results show that the local arrangements of grain boundaries and the resulting structural units have a significant influence on the magnitude of vacancy binding energies, and the site-to-site variation within each boundary is substantial. Comparing the vacancy binding energies for each site in different c/a ratio materials shows that the binding energy increases significantly with an increase in c/a ratio. For example, in the [1-210] tilt axis, Ti and Zr with c/a=1.5811 have a lower vacancy binding energy than the Mg with c/a=1.6299. Furthermore, when the grain boundary energies of all 190 boundaries in all three elements are plotted against the vacancy binding energies of the same boundaries, a highly negative correlation (r = -0.7144) is revealed that has a linear fit with a proportionality constant of -25 ang^2. This is significant for applications where extreme environmental damage generates lattice defects and grain boundaries act as sinks for both vacancies and interstitial atoms. △ Less

Submitted 9 December, 2013; v1 submitted 9 October, 2013; originally announced October 2013.

Journal ref: J. Appl. Phys. 114, 244309 (2013)

Binding Energetics of Substitutional and Interstitial Helium and Di-Helium Defects with Grain Boundary Structure in alpha-Fe

Authors: M. A. Tschopp, F. Gao, L. Yang, K. N. Solanki

Abstract: The formation/binding energetics and length scales associated with the interaction between He atoms and grain boundaries in BCC alpha-Fe was explored. Ten different low Sigma grain boundaries from the <100> and <110> symmetric tilt grain boundary systems were used. In this work, we then calculated formation/binding energies for 1-2 He atoms in the substitutional and interstitial sites (HeV, He2V,… ▽ More The formation/binding energetics and length scales associated with the interaction between He atoms and grain boundaries in BCC alpha-Fe was explored. Ten different low Sigma grain boundaries from the <100> and <110> symmetric tilt grain boundary systems were used. In this work, we then calculated formation/binding energies for 1-2 He atoms in the substitutional and interstitial sites (HeV, He2V, HeInt, He2Int) at all potential grain boundary sites within 15 Angstroms of the boundary (52826 simulations total). The present results provide detailed information about the interaction energies and length scales of 1-2 He atoms with grain boundaries for the structures examined. A number of interesting new findings emerge from the present study. For instance, we find that the Sigma3(112) twin boundary in BCC Fe possesses a much smaller binding energy than other boundaries, which corresponds in long time dynamics simulations to the ability of an interstitial He defect to break away from the boundary in simulations on the order of nanoseconds, in contrast to other boundaries. Additionally, we find that the calculated formation/binding energies for substitutional He (i.e., He in a monovacancy) correlates well (R>0.9) with interstitial He, substitutional He2, and interstitial He2 energies for the same atomic site. This correlation asserts that the local environment surrounding each site strongly influences the He defect energies and that highly accurate quantum mechanics calculations of lower order defects may be an adequate predictor of higher order defects. The present work shows that the binding and formation energies for He defects are important for understanding the physics of He diffusion and trap** by grain boundaries, which can be important for modeling He interactions in polycrystalline steels. △ Less

Submitted 4 December, 2013; v1 submitted 24 September, 2013; originally announced September 2013.

Journal ref: Journal of Applied Physics, 115 (2014) 033503

Nonlocal Modeling in High-Velocity Impact Failure of 6061-T6 Aluminum

Authors: F. R. Ahad, K. Enakoutsa, K. N. Solanki, D. J. Bammann

Abstract: In this paper, we present numerical simulations with local and nonlocal models under dynamic loading conditions. We show that for finite element (FE) computations of high-velocity, impact problems with softening material models will result in spurious post-bifurcation mesh dependency solutions. To alleviate numerical instability associated within the post-bifurcation regime, a characteristic lengt… ▽ More In this paper, we present numerical simulations with local and nonlocal models under dynamic loading conditions. We show that for finite element (FE) computations of high-velocity, impact problems with softening material models will result in spurious post-bifurcation mesh dependency solutions. To alleviate numerical instability associated within the post-bifurcation regime, a characteristic length scale was added to the constitutive relations based on calibration of the series of different notch specimen tests. This work aims to assess the practical relevance of the modified model to yield mesh independent results in the numerical simulations of high-velocity impact problems. To this end, we consider the problem of a rigid projectile moving at a range of velocities between 89-107 m/s, colliding against a 6061-T6 Aluminum disk. A material model embedded with a characteristic length scale in the manner proposed by Pijaudier-Cabot and Bazant (1987), but in the context of concrete damage, was utilized to describe the damage response of the disk. The numerical result shows that the addition of a characteristic length scale to the constitutive model does eliminate the pathological mesh dependency and shows excellent agreements between numerical and experimental results. Furthermore, the application of a nonlocal model for higher strain rate behavior shows the ability of the model to address intense localized deformations, irreversible flow, softening, and final failure. △ Less

Submitted 18 September, 2013; originally announced September 2013.

Atomic scale investigation of grain boundary structure role on deformation and crack growth dynamics in Aluminum

Authors: I. Adlakha, M. A. Bhatia, K. N. Solanki, M. A. Tschopp

Abstract: The role that grain boundary (GB) structure plays on the plasticity of interfaces with preexisting cracks and on the interface crack dynamics was investigated using MD for both <100> and <110> aluminum STGBs. In simulations with a crack at the interface, this research shows how the maximum normal strength of the interface correlates with the respective GB energy, the GB misorientation, and the GB… ▽ More The role that grain boundary (GB) structure plays on the plasticity of interfaces with preexisting cracks and on the interface crack dynamics was investigated using MD for both <100> and <110> aluminum STGBs. In simulations with a crack at the interface, this research shows how the maximum normal strength of the interface correlates with the respective GB energy, the GB misorientation, and the GB structural description. For instance, the normal interface strength for GBs containing D structural unit (SU) or stacking faults in the GB structural description (Σ13 (510) θ=22.6° and Σ97 (940) θ=47.9°) shows a noticeable decrease in interface strength, as compared to other evaluated <100> GBs that contained favored SUs. In the case of <110> interfaces, the presence of the E SU in the GB structure lowers the maximum normal interface strength by 35%. Further investigation of the deformation at the crack tip in GBs containing the E structure revealed that the E SU underwent atomic shuffling to accommodate intrinsic stacking faults (ISFs) along the interface, which in turn acts as a site for partial dislocation nucleation. Interestingly, regardless of GB misorientation, GB interfaces examined here containing the E structure in their structural period exhibited relatively small variation in maximum normal strength of interface. The GB volume ahead of the crack tip underwent structural rearrangement which, in turn, influenced the crack propagation mechanism. In most GBs, the crack propagation was due to alternating mechanisms of dislocation emission, followed by propagation of dislocation (blunting) and cleavage/crack advance. Moreover, the crack growth rates along the GB interface were strongly influenced by the initial free volume at the interface, i.e., faster crack growth was observed along interfaces with higher initial free volume. △ Less

Submitted 14 September, 2013; originally announced September 2013.

Characterizing the local primary dendrite arm spacing in directionally-solidified dendritic microstructures

Authors: M. A. Tschopp, J. D. Miller, A. L. Oppedal, K. N. Solanki

Abstract: Characterizing the spacing of primary dendrite arms in directionally-solidified microstructures is an important step for develo** process-structure-property relationships by enabling the quantification of (i) the influence of processing on microstructure and (ii) the influence of microstructure on properties. In this work, we utilized a new Voronoi-based approach for spatial point pattern analys… ▽ More Characterizing the spacing of primary dendrite arms in directionally-solidified microstructures is an important step for develo** process-structure-property relationships by enabling the quantification of (i) the influence of processing on microstructure and (ii) the influence of microstructure on properties. In this work, we utilized a new Voronoi-based approach for spatial point pattern analysis that was applied to an experimental dendritic microstructure. This technique utilizes a Voronoi tessellation of space surrounding the dendrite cores to determine nearest neighbors and the local primary dendrite arm spacing. In addition, we compared this technique to a recent distance-based technique and a modification to this using Voronoi tesselations. Moreover, a convex hull-based technique was used to include edge effects for such techniques, which can be important for thin specimens. These methods were used to quantify the distribution of local primary dendrite arm spacings, their spatial distribution, and their correlation with interdendritic eutectic particles for an experimental directionally-solidified Ni-based superalloy micrograph. This can be an important step for correlating with both processing and properties in directionally-solidified dendritic microstructures. △ Less

Submitted 10 June, 2013; v1 submitted 31 May, 2013; originally announced May 2013.

Journal ref: Metallurgical Transactions A, 2013

Quantifying the Energetics and Length Scales of Carbon Segregation to Fe Symmetric Tilt Grain Boundaries Using Atomistic Simulations

Authors: N. R. Rhodes, M. A. Tschopp, K. N. Solanki

Abstract: Segregation of impurities to grain boundaries plays an important role in both the stability and macroscopic behavior of polycrystalline materials. The research objective in this work is to better characterize the energetics and length scales involved with the process of solute and impurity segregation to grain boundaries. Molecular dynamics simulations are used to calculate the segregation energie… ▽ More Segregation of impurities to grain boundaries plays an important role in both the stability and macroscopic behavior of polycrystalline materials. The research objective in this work is to better characterize the energetics and length scales involved with the process of solute and impurity segregation to grain boundaries. Molecular dynamics simulations are used to calculate the segregation energies for carbon within multiple grain boundary sites over a database of 125 symmetric tilt grain boundaries in Fe. The simulation results show that the majority of atomic sites near the grain boundary have segregation energies lower than in the bulk. Moreover, depending on the boundary, the segregation energies approach the bulk value approximately 5-12 Å away from the center of the grain boundary, providing an energetic length scale for carbon segregation. A subsequent data reduction and statistical representation of this dataset provides critical information such as about the mean segregation energy and the associated energy distributions for carbon atoms as a function of distance from the grain boundary, which quantitatively informs higher scale models with energetics and length scales necessary for capturing the segregation behavior of impurities in Fe. The significance of this research is the development of a methodology capable of ascertaining segregation energies over a wide range of grain boundary character (typical of that observed in polycrystalline materials), which herein has been applied to carbon segregation in a specific class of grain boundaries in iron. △ Less

Submitted 12 February, 2013; v1 submitted 23 June, 2012; originally announced June 2012.

Journal ref: Modeling and Simulation in Materials Science and Engineering, 21(3) (2013) 035009