-
Theory of the force of Friction Acting on Water Chains Flowing through Carbon Nanotubes
Authors:
J. B. Sokoloff,
A. W. C. Lau
Abstract:
A simple model for the friction experienced by the one dimensional water chains that flow through subnanometer diameter carbon nanotubes is studied. The model is based on a lowest order perturbation theory treatment of the friction experienced by the water chains due to the excitation of phonon and electron excitations in both the nanotube and the water chain, as a result of the motion of the chai…
▽ More
A simple model for the friction experienced by the one dimensional water chains that flow through subnanometer diameter carbon nanotubes is studied. The model is based on a lowest order perturbation theory treatment of the friction experienced by the water chains due to the excitation of phonon and electron excitations in both the nanotube and the water chain, as a result of the motion of the chain. On the basis of this model, we are able to demonstrate that the observed flow velocities of water chains through carbon nanotubes of the order of cm/s can be accounted for, if the nanotube is metallic. If it is insulating, however, our calculations imply that the flow velocity of the water could be much larger for the pressure gradient in experimental studies of water flow through subnanometer diameter nanotubes.
△ Less
Submitted 24 January, 2023; v1 submitted 1 August, 2022;
originally announced August 2022.
-
Electrical Image Potential and Solvation Energies for an Ion in a Pore in a Metallic Electrode or in a Nanotube
Authors:
Jeffrey B Sokoloff
Abstract:
Electrical image potentials can be important in small spaces, such as nanoscale pores in porous electrodes, which are used in capacitive desalination and in supercapacitors. It will be shown here that inside pores in porous metallic materials the image potentials can be considerably larger than near flat walls, as a result of the fact that the dielectric constant for an electric field perpendicula…
▽ More
Electrical image potentials can be important in small spaces, such as nanoscale pores in porous electrodes, which are used in capacitive desalination and in supercapacitors. It will be shown here that inside pores in porous metallic materials the image potentials can be considerably larger than near flat walls, as a result of the fact that the dielectric constant for an electric field perpendicular to a wall is much smaller than the bulk dielectric constant of water. Calculations will be presented for the image potential in spherical and cylindrically shaped pores. The calculations for cylindrical pores can also be applied to nanotubes. It was believed for a long time, on the basis of molecular dynamics simulations, that in order to push a salt solution through a small radius nanotube, work must be done against the solvation energy of the ions, which is larger inside a narrow nanotube than it is in the bulk. The relatively large image charge potential energy in narrow nanotubes, however, tends to oppose this increase in the solvation energy. The degree to which the image potential facilitates the flow of the salt ions into nanotubes will be discussed.
△ Less
Submitted 24 December, 2021;
originally announced December 2021.
-
Hydrophilic Porous Materials as Helmet Padding Able to Prevent Traumatic Brain Injuries
Authors:
J. B. Sokoloff
Abstract:
The minimum possible value of the average deceleration of the head of a player engaged in an impact sport such as football or hockey, as a result of an impact of his/her helmet with a surface or another player, is inversely proportional to the helmet padding thickness. Since there are practical limits to its maximum thickness, it is difficult to significantly reduce the average acceleration. There…
▽ More
The minimum possible value of the average deceleration of the head of a player engaged in an impact sport such as football or hockey, as a result of an impact of his/her helmet with a surface or another player, is inversely proportional to the helmet padding thickness. Since there are practical limits to its maximum thickness, it is difficult to significantly reduce the average acceleration. There is evidence, however, that the peak, rather than the average, acceleration is the most significant cause of brain injury. It is proposed here that brain injuries that occur as a result of an impact, could be reduced by using as padding a hydrophilic porous material swollen with fluid. The friction experienced by the fluid as it is squeezed out of the porous material in an impact can "tune" the acceleration of the skull so that it is never significantly higher than its average during the impact.
△ Less
Submitted 31 August, 2022; v1 submitted 28 October, 2021;
originally announced November 2021.
-
Droplet evaporation residue indicating SARS-COV-2 survivability on surfaces
Authors:
Zilong He,
Siyao Shao,
Jiaqi Li,
S. Santosh Kumar,
J. B. Sokoloff,
Jiarong Hong
Abstract:
SARS-CoV-2 survives and remains viable on surfaces for several days under different environments as reported in recent studies. However, it is unclear how the viruses survive for such a long time and why their survivability varies across different surfaces. To address these questions, we conduct systematic experiments investigating the evaporation of droplets produced by a nebulizer and human-exha…
▽ More
SARS-CoV-2 survives and remains viable on surfaces for several days under different environments as reported in recent studies. However, it is unclear how the viruses survive for such a long time and why their survivability varies across different surfaces. To address these questions, we conduct systematic experiments investigating the evaporation of droplets produced by a nebulizer and human-exhaled gas on surfaces. We found that these droplets do not disappear with evaporation, but instead shrink to a size of a few micrometers (referred to as residues), persist for more than 24 hours, and are highly durable against changes of environmental conditions. The characteristics of these residues change significantly across surface types. Specifically, surfaces with high thermal conductivity like copper do not leave any resolvable residues, while stainless steel, plastic, and glass surfaces form residues from a varying fraction of all deposited droplets at 40% relative humidity. Lowering humidity level suppresses the formation of residues while increasing humidity level enhances it. Our results suggest that these microscale residues can potentially insulate the virus against environmental changes, allowing them to survive inhospitable environments and remain infectious for prolonged durations after deposition. Our findings can also be extended to other viruses transmitted through respiratory droplets (e.g., SARS-CoV, flu viruses, etc.), and can thus lead to practical guidelines for disinfecting surfaces and other prevention measures (e.g., humidity control) for limiting viral transmission.
△ Less
Submitted 4 October, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Desalination due to Electrical Image Forces
Authors:
J. B. Sokoloff
Abstract:
It will be shown that for a solution of salt dissolved in water in contact with a metallic wall, the concentration of salt ions (both positive and negative) within a few Angstroms of the wall can be large enough to exceed the solubility limit of the salt, as a result of electrical image charge forces. In addition, since the dielectric constant of water increases from 2.1 at the wall to 81 at about…
▽ More
It will be shown that for a solution of salt dissolved in water in contact with a metallic wall, the concentration of salt ions (both positive and negative) within a few Angstroms of the wall can be large enough to exceed the solubility limit of the salt, as a result of electrical image charge forces. In addition, since the dielectric constant of water increases from 2.1 at the wall to 81 at about a nanometer from a solid wall, there will be an attractive image potential near the plane on which this increase of the dielectric constant occurs. The possible existence of these image potentials suggests that the salt can be removed from the water by making salt water flow between an array of parallel solid plates..
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
Theory of a Possible Mechanism for Lubrication and Surface Protection by an Electrically Neutral Hydrogels
Authors:
J. B. Sokoloff
Abstract:
It is demonstrated that polymers sticking out of the surface of a neutral hydrogel are capable of preventing adhesive forces from pulling a hydrogel into close contact with a surface against which it is pressed. The proposed mechanism for lubrication or surface protection suggests a possible mechanism for protecting the cornea from a contact lens, which is held against the eye by Laplace pressure.…
▽ More
It is demonstrated that polymers sticking out of the surface of a neutral hydrogel are capable of preventing adhesive forces from pulling a hydrogel into close contact with a surface against which it is pressed. The proposed mechanism for lubrication or surface protection suggests a possible mechanism for protecting the cornea from a contact lens, which is held against the eye by Laplace pressure. This mechanism, however, is only able to keep a gel coated surface from sticking to a surface against which it is pressed, if the gel and surface are bathed in fluid. Expected optical properties of the gel-surface interface are discussed, in order to suggest possible ways to study the gel-solid interface experimentally.
△ Less
Submitted 18 September, 2014;
originally announced September 2014.
-
Static and Dry Friction due to Multiscale Surface Roughness
Authors:
J. B. Sokoloff
Abstract:
It is shown on the basis of scaling arguments that a disordered interface between two elastic solids will quite generally exhibit static and "dry friction" (i.e., kinetic friction which does not vanish as the sliding velocity approaches zero), because of Tomlinson model instabilities that occur for small length scale asperities. This provides a possible explanation for why static and "dry" frict…
▽ More
It is shown on the basis of scaling arguments that a disordered interface between two elastic solids will quite generally exhibit static and "dry friction" (i.e., kinetic friction which does not vanish as the sliding velocity approaches zero), because of Tomlinson model instabilities that occur for small length scale asperities. This provides a possible explanation for why static and "dry" friction are virtually always observed, and superlubricity almost never occurs.
△ Less
Submitted 13 May, 2008;
originally announced May 2008.
-
Theory of the Observed Ultra-Low Friction between Sliding Polyelectrolyte Brushes
Authors:
J. B. Sokoloff
Abstract:
It is shown using a method based on a modified version of the mean field theory of Miklavic Marcelja that it should be possible for osmotic pressure due to the counterions associated with the two polyelectrolyte polymer brush coated surfaces to support a reasonable load (i.e., about $10^6 Pa$) with the brushes held sufficiently far apart to prevent entanglement of polymers belonging to the two b…
▽ More
It is shown using a method based on a modified version of the mean field theory of Miklavic Marcelja that it should be possible for osmotic pressure due to the counterions associated with the two polyelectrolyte polymer brush coated surfaces to support a reasonable load (i.e., about $10^6 Pa$) with the brushes held sufficiently far apart to prevent entanglement of polymers belonging to the two brushes, thus avoiding what is believed to be the dominant mechanisms for static and dry friction.
△ Less
Submitted 28 May, 2008; v1 submitted 8 June, 2007;
originally announced June 2007.
-
Friction between Polymer Brushes
Authors:
J. B. Sokoloff
Abstract:
By solving the equilibrium equations for a polymer in a neutral polymer brush, the degree of interpenetration of two polymer brushes in contact and near contact is calculated. These results are used to calculate values of the force of static friction in agreement with recent friction measurements for polymer brush lubricated surfaces. It is shown that at sufficiently light loads polymer brush co…
▽ More
By solving the equilibrium equations for a polymer in a neutral polymer brush, the degree of interpenetration of two polymer brushes in contact and near contact is calculated. These results are used to calculate values of the force of static friction in agreement with recent friction measurements for polymer brush lubricated surfaces. It is shown that at sufficiently light loads polymer brush coated surfaces can slide, with the load supported entirely by osmotic pressure, at a sufficiently large spatial separation so as to avoid entanglement, and hence static friction.
△ Less
Submitted 13 February, 2006;
originally announced February 2006.
-
Theory of De-Pinning of Monolayer Films Adsorbed on a Quartz Crystal Microbalance
Authors:
J. B. Sokoloff,
I. Webman
Abstract:
In quartz crystal microbalance (QCM) studies of the friction between an adsorbed monolayer film and a metallic substrate, the films are observed to slide relative to the substrate under inertial forces of order $10^{-14}dyn$ per film atom, a force much smaller than all theoretical estimates of the force that surface defects are capable of exerting. In this letter we propose, in order to resolve…
▽ More
In quartz crystal microbalance (QCM) studies of the friction between an adsorbed monolayer film and a metallic substrate, the films are observed to slide relative to the substrate under inertial forces of order $10^{-14}dyn$ per film atom, a force much smaller than all theoretical estimates of the force that surface defects are capable of exerting. In this letter we propose, in order to resolve this issue, that if the defect potentials have a range of greater than an atomic spacing, the net force on a relatively stiff film due to the defects is likely to be extremely small. Line defects (e.g., step and facet edges and grain boundaries) as well as more localized defects (e.g., vacancies) are considered.
△ Less
Submitted 20 April, 2005;
originally announced April 2005.
-
Lack of Pinning for Rigid Sliding Monolayers in Microbalance Experiments
Authors:
J. B. Sokoloff,
I. Webman
Abstract:
Recent work on the dynamics of monolayers on a metallic substrate attached to a quartz oscillator has provided interesting data on kinetic friction at the microscopic level. Sliding of the film relative to the substrate is often observed even in situations in which theory seems to predict that the film should be pinned by substrate imperfections. In this letter we propose, in order to attempt to…
▽ More
Recent work on the dynamics of monolayers on a metallic substrate attached to a quartz oscillator has provided interesting data on kinetic friction at the microscopic level. Sliding of the film relative to the substrate is often observed even in situations in which theory seems to predict that the film should be pinned by substrate imperfections. In this letter we propose, in order to attempt to resolve this issue, that if the defect potentials have a range of a little more than an atomic spacing, the net forces on the film due to the defects are likely to be quite small due to cancellations.
△ Less
Submitted 30 November, 2004;
originally announced November 2004.
-
A Mechanism for Lubrication between Surfaces with Atomic Level Roughness
Authors:
J. B. Sokoloff
Abstract:
It is proposed that lubricant molecules adsorbed on an interface between two asperities in contact, which is rough on the atomic scale, can switch the interface from the strong to weak pinning regime, resulting in a large reduction in the static friction. This is proposed as a possible mechanism for boundary lubrication. \
It is proposed that lubricant molecules adsorbed on an interface between two asperities in contact, which is rough on the atomic scale, can switch the interface from the strong to weak pinning regime, resulting in a large reduction in the static friction. This is proposed as a possible mechanism for boundary lubrication. \
△ Less
Submitted 1 April, 2004; v1 submitted 14 October, 2003;
originally announced October 2003.
-
Refraction of Electromagnetic Energy for Wave Packets Incident on a Negative Index Medium is Always Negative
Authors:
W. T. Lu,
J. B. Sokoloff,
S. Sridhar
Abstract:
We analyze refraction of electromagnetic wave packets on passing from an isotropic positive to an isotropic negative refractive index medium. We definitively show that in all cases the energy is always refracted negatively. For localized wave packets, the group refraction is also always negative.
We analyze refraction of electromagnetic wave packets on passing from an isotropic positive to an isotropic negative refractive index medium. We definitively show that in all cases the energy is always refracted negatively. For localized wave packets, the group refraction is also always negative.
△ Less
Submitted 2 June, 2003;
originally announced June 2003.
-
Dry Friction due to Adsorbed Molecules
Authors:
C. Daly,
J. Zhang,
J. B. Sokoloff
Abstract:
Using an adiabatic approximation method, which searches for Tomlinson model-like instabilities for a simple but still realistic model for two crystalline surfaces in the extremely light contact limit, with mobile molecules present at the interface, sliding relative to each other, we are able to account for the virtually universal occurrence of "dry friction." The model makes important prediction…
▽ More
Using an adiabatic approximation method, which searches for Tomlinson model-like instabilities for a simple but still realistic model for two crystalline surfaces in the extremely light contact limit, with mobile molecules present at the interface, sliding relative to each other, we are able to account for the virtually universal occurrence of "dry friction." The model makes important predictions for the dependence of friction on the strength of the interaction of each surface with the mobile molecules.
△ Less
Submitted 20 August, 2002;
originally announced August 2002.
-
Comment on "Wave Refraction in Negative-Index Materials: Always Positive and Very Inhomogeneous"
Authors:
W. T. Lu,
J. B. Sokoloff,
S. Sridhar
Abstract:
Wave refraction in negative-index media is always negative.
Wave refraction in negative-index media is always negative.
△ Less
Submitted 29 July, 2002;
originally announced July 2002.
-
Explaining the Virtual Universal Occurrence of Static Friction
Authors:
J. B. Sokoloff
Abstract:
Perturbation theory, simulations and scaling arguments predict that there should be no static friction for two weakly interacting flat atomically smooth clean solid surfaces. The absence of static friction results from the fact that the atomic level interfacial potential energy is much weaker than the elastic potential energy, which prevents the atoms from sinking to their interfacial potential…
▽ More
Perturbation theory, simulations and scaling arguments predict that there should be no static friction for two weakly interacting flat atomically smooth clean solid surfaces. The absence of static friction results from the fact that the atomic level interfacial potential energy is much weaker than the elastic potential energy, which prevents the atoms from sinking to their interfacial potential minima. Consequently, we have essentially two rigid solids, for which the forces at randomly distributed "pinning sites" cancel. It is shown here that even fluctuations in the concentration of atomic level defects at the interface do not account for static friction. It is also argued that the sliding of contacting asperities, which occurs when the problem is studied at the multi-micron length scale, relative to each other involves the shearing of planes of atoms. Since this results in a force for the interaction of two asperities which varies over sliding distances of the order of an atomic spacing, the contacting asperities at the surface are able to sink to their interfacial potential minima, with negligible cost in elastic potential energy. This results in static friction.
△ Less
Submitted 22 March, 2001;
originally announced March 2001.
-
Kinetic Friction due to Ohm's Law Heating
Authors:
J. B. Sokoloff
Abstract:
Using both a recent calculation by Bruch of the dam** of the motion of a monolayer nitrogen film oscillating harmonically on a metallic surface due to Ohm's law heating and a Thomas-Fermi approximation treatment of the Ohm's law heating mechanism, which accounts for the nonzero thickness of the surface region of a metal, it is argued that this mechanism for friction is able to account for rece…
▽ More
Using both a recent calculation by Bruch of the dam** of the motion of a monolayer nitrogen film oscillating harmonically on a metallic surface due to Ohm's law heating and a Thomas-Fermi approximation treatment of the Ohm's law heating mechanism, which accounts for the nonzero thickness of the surface region of a metal, it is argued that this mechanism for friction is able to account for recent measurements of the drop in the friction for anitrogen film sliding over a lead substrate as it goes below its superconducting transition temperature. Bruch's calculation is also made more transparent by re-doing the calculation for a film sliding at constant speed, instead of oscillating. Using this treatment, it is easily shown that Bruch's calculation is equivalent to integrating Boyer's solution of the problem of a charge sliding over a metallic surface over the charge density of the monolayer nitrogen film.
△ Less
Submitted 31 October, 2001; v1 submitted 3 August, 2000;
originally announced August 2000.
-
Static Friction between Elastic Solids due to Random Asperities
Authors:
J. B. Sokoloff
Abstract:
Several workers have established that the Larkin domains for two three dimensional nonmetallic elastic solids in contact with each other at a disordered interface are enormously large. This implies that there should be negligible static friction per unit area in the macroscopic solid limit.
The present work argues that the fluctuations in the heights of the random asperities at the interface th…
▽ More
Several workers have established that the Larkin domains for two three dimensional nonmetallic elastic solids in contact with each other at a disordered interface are enormously large. This implies that there should be negligible static friction per unit area in the macroscopic solid limit.
The present work argues that the fluctuations in the heights of the random asperities at the interface that occur in the Greenwood-Williamson model can account for static friction.
△ Less
Submitted 19 October, 2000; v1 submitted 13 June, 2000;
originally announced June 2000.
-
Onset of dielectric modes at 110K and 60K due to local lattice distortions in non-superconducting YBa_{2}Cu_{3}O_{6.0} crystals
Authors:
Z. Zhai,
P. V. Parimi,
J. B. Sokoloff,
A. Erb,
S. Sridhar
Abstract:
We report the observation of two dielectric transitions at 110K and 60K in the microwave response of non-superconducting YBa_{2}Cu_{3}O_{6.0} crystals. The transitions are characterized by a change in polarizability and presence of loss peaks, associated with overdamped dielectric modes. An explanation is presented in terms of changes in polarizability of the apical O atoms in the Ba-O layer, af…
▽ More
We report the observation of two dielectric transitions at 110K and 60K in the microwave response of non-superconducting YBa_{2}Cu_{3}O_{6.0} crystals. The transitions are characterized by a change in polarizability and presence of loss peaks, associated with overdamped dielectric modes. An explanation is presented in terms of changes in polarizability of the apical O atoms in the Ba-O layer, affected by lattice softening at 110K, due to change in buckling of the Cu-O layer. The onset of another mode at 60K strongly suggests an additional local lattice change at this temperature. Thus microwave dielectric measurements are sensitive indicators of lattice softening which may be relevant to superconductivity.
△ Less
Submitted 31 May, 2000;
originally announced May 2000.
-
Strongly Temperature Dependent Sliding Friction for a Superconducting Interface
Authors:
J. B. Sokoloff,
M. S. Tomassone,
A. Widom
Abstract:
A sudden drop in mechanical friction, between an adsorbed nitrogen monolayer and a lead substrate, occurs when the lead passes through the superconducting transition temperature. We attribute this effect to a sudden drop at the superconducting transition temperature of the substrate Ohmic heating. The Ohmic heating is due to the electronic screening current that results from the sliding adsorbed…
▽ More
A sudden drop in mechanical friction, between an adsorbed nitrogen monolayer and a lead substrate, occurs when the lead passes through the superconducting transition temperature. We attribute this effect to a sudden drop at the superconducting transition temperature of the substrate Ohmic heating. The Ohmic heating is due to the electronic screening current that results from the sliding adsorbed film.
△ Less
Submitted 18 May, 1999;
originally announced May 1999.
-
Effects of Defects on Friction for a Xe Film Sliding on Ag(111)
Authors:
M. S. Tomassone,
J. B. Sokoloff
Abstract:
The effects of a step defect and a random array of point defects (such as vacancies or substitutional impurities) on the force of friction acting on a xenon monolayer film as it slides on a silver (111) substrate are studied by molecular dynamic simulations and compared with the results of lowest order perturbation theory in the substrate corrugation potential. For the case of a step, the magnit…
▽ More
The effects of a step defect and a random array of point defects (such as vacancies or substitutional impurities) on the force of friction acting on a xenon monolayer film as it slides on a silver (111) substrate are studied by molecular dynamic simulations and compared with the results of lowest order perturbation theory in the substrate corrugation potential. For the case of a step, the magnitude and velocity dependence of the friction force are strongly dependent on the direction of sliding respect to the step and the corrugation strength. When the applied force F is perpendicular to the step, the film is pinned forF less than a critical force Fc. Motion of the film along the step, however, is not pinned. Fluctuations in the sliding velocity in time provide evidence of both stick-slip motion and thermally activated creep. Simulations done with a substrate containing a 5 percent concentration of random point defects for various directions of the applied force show that the film is pinned for the force below a critical value. The critical force, however, is still much lower than the effective inertial force exerted on the film by the oscillations of the substrate in experiments done with a quartz crystal microbalance (QCM). Lowest order perturbation theory in the substrate potential is shown to give results consistent with the simulations, and it is used to give a physical picture of what could be expected for real surfaces which contain many defects.
△ Less
Submitted 13 April, 1999; v1 submitted 12 April, 1999;
originally announced April 1999.
-
Observation of spin freezing and relaxation at microwave frequencies in the spin ladder compound $Sr_{14-x}Ca_{x}Cu_{24}O_{41}$
Authors:
Z. Zhai,
P. V. Patanjali,
N. Hakim,
J. B. Sokoloff,
S. Sridhar,
U. Ammerahl,
A. Vietkine,
A. Revcolevschi
Abstract:
We report the observation of a frequency ($ω$) and temperature (T) -dependent loss peak in $χ''$ and accompanying dispersion in $χ'$ from microwave (2-18GHz) measurements of the complex susceptibility $\tildeχ(ω, T)=χ'+iχ''$ of $Sr_{14-x}Ca_{x}Cu_{24}O_{41}$. We associate this phenomenon with a rapid decrease of spin disorder and corresponding spin relaxation rate, representing a ``spin freezing…
▽ More
We report the observation of a frequency ($ω$) and temperature (T) -dependent loss peak in $χ''$ and accompanying dispersion in $χ'$ from microwave (2-18GHz) measurements of the complex susceptibility $\tildeχ(ω, T)=χ'+iχ''$ of $Sr_{14-x}Ca_{x}Cu_{24}O_{41}$. We associate this phenomenon with a rapid decrease of spin disorder and corresponding spin relaxation rate, representing a ``spin freezing transition'' accompanying charge ordering which occurs at temperatures $\sim 250K$. Our results enable direct quantitative measurements of the spin relaxation rate, and yield information on spin dynamics in these materials and the related compounds $SrCuO_{2}$ and $Sr_{2}CuO_{3}$.
△ Less
Submitted 11 March, 1999;
originally announced March 1999.
-
Molecular Dynamics Simulation of Friction in Xenon Films on a Silver Substrate
Authors:
M. S. Tomassone,
J. B. Sokoloff,
A. Widon,
J. Krim
Abstract:
We perform molecular dynamics simulations of friction for atomically thin Xe films sliding on Ag(111). We determine the inverse of the coefficient of friction (i.e. slip time) by direct calculation of the decay of the center of mass velocity after applying an external force, as well as from the velocity autocorrelation function. We find that the slip time exhibits a drop followed by a sharp incr…
▽ More
We perform molecular dynamics simulations of friction for atomically thin Xe films sliding on Ag(111). We determine the inverse of the coefficient of friction (i.e. slip time) by direct calculation of the decay of the center of mass velocity after applying an external force, as well as from the velocity autocorrelation function. We find that the slip time exhibits a drop followed by a sharp increase in a range of coverage near one monolayer. The slip time then levels off with further coverage increases in agreement with previously reported experiments. Our simulations suggest that the friction found in this system is dominated by phonon excitations.
△ Less
Submitted 21 July, 1997;
originally announced July 1997.