Showing 1–38 of 38 results for author: Soci, C

Nonlinear interferometry-based metrology of magneto-optical properties at infrared wavelengths

Authors: Tanmoy Chakraborty, Thomas Produit, Harish N S Krishnamoorthy, Cesare Soci, Anna V. Paterova

Abstract: Magneto-optical properties of materials are utilized in numerous applications both in scientific research and industries. The novel properties of these materials can be further investigated by performing metrology in the infrared wavelength range, thereby enriching their potential applications. However, current infrared metrology techniques can be challenging and resource-intensive due to the unav… ▽ More Magneto-optical properties of materials are utilized in numerous applications both in scientific research and industries. The novel properties of these materials can be further investigated by performing metrology in the infrared wavelength range, thereby enriching their potential applications. However, current infrared metrology techniques can be challenging and resource-intensive due to the unavailability of suitable components. To address these challenges, we propose and demonstrate a set of measurements based on nonlinear interferometry, which allows us investigating magneto-optical properties of materials at infrared wavelength range by performing optical detection at the visible range. For a proof-of-principle study, we measure the Verdet constant of a bismuth-iron-garnet, over a spectral bandwidth of 600 nm in the near-IR range. △ Less

Submitted 28 June, 2024; originally announced June 2024.

Comments: 10 pages, 12 fugures

Electrically generated exciton polaritons with spin on-demand

Authors: Yutao Wang, Giorgio Adamo, Son Tung Ha, **gyi Tian, Cesare Soci

Abstract: Generation and manipulation of exciton polaritons with controllable spin could deeply impact spintronic applications, quantum simulations, and quantum information processing, but is inherently challenging due to the charge neutrality of the polariton and the device complexity it requires. In this work, we demonstrate electrical generation of spin-polarized exciton polaritons in a monolithic dielec… ▽ More Generation and manipulation of exciton polaritons with controllable spin could deeply impact spintronic applications, quantum simulations, and quantum information processing, but is inherently challenging due to the charge neutrality of the polariton and the device complexity it requires. In this work, we demonstrate electrical generation of spin-polarized exciton polaritons in a monolithic dielectric perovskite metasurface embedded in a light-emitting transistor. A finely tailored interplay of in- and out-of-plane symmetry breaking of the metasurface allows to lift the spin degeneracy through the polaritonic Rashba effect, yielding high spin purity with normalized Stokes parameter of S3~0.8. Leveraging on spin-momentum locking, the unique metatransistor device architecture enables electrical control of spin and directionality of the polaritonic emission. This work advances the development of compact and tunable spintronic devices, and represents an important step toward the realization of electrically pumped inversionless spin-lasers. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Dirac mass induced by optical gain and loss

Authors: Letian Yu, Haoran Xue, Ruixiang Guo, Eng Aik Chan, Yun Yong Terh, Cesare Soci, Baile Zhang, Y. D. Chong

Abstract: Mass is commonly regarded as an intrinsic property of matter, but modern physics reveals particle masses to have complex origins, such as the Higgs mechanism in high-energy physics. In crystal lattices such as graphene, relativistic Dirac particles can exist as low-energy quasiparticles with masses imparted by lattice symmetry-breaking perturbations. These mass-generating mechanisms all assume Her… ▽ More Mass is commonly regarded as an intrinsic property of matter, but modern physics reveals particle masses to have complex origins, such as the Higgs mechanism in high-energy physics. In crystal lattices such as graphene, relativistic Dirac particles can exist as low-energy quasiparticles with masses imparted by lattice symmetry-breaking perturbations. These mass-generating mechanisms all assume Hermiticity, or the conservation of energy in detail. Using a photonic synthetic lattice, we show experimentally that Dirac masses can be generated via non-Hermitian perturbations based on optical gain and loss. We then explore how the space-time engineering of the gain/loss-induced Dirac mass affects the quasiparticles. As we show, the quasiparticles undergo Klein tunnelling at spatial boundaries, but a local breaking of a non-Hermitian symmetry can produce a novel flux nonconservation effect at the domain walls. At a temporal boundary that abruptly flips the sign of the Dirac mass, we observe a variant of the time reflection phenomenon: in the nonrelativistic limit, the Dirac quasiparticle reverses its velocity, while in the relativistic limit the original velocity is retained. △ Less

Submitted 14 April, 2024; v1 submitted 27 January, 2024; originally announced January 2024.

Asynchronous Charge Carrier Injection in Perovskite Light-Emitting Transistors

Authors: Maciej Klein, Krzysztof Blecharz, Bryan Wei Hao Cheng, Annalisa Bruno, Cesare Soci

Abstract: Unbalanced mobility and injection of charge carriers in metal-halide perovskite light-emitting devices pose severe limitations to the efficiency and response time of the electroluminescence. Modulation of gate bias in methylammonium lead iodide light-emitting transistors has proven effective to increase the brightness of light emission, up to MHz frequencies. In this work, we developed a new appro… ▽ More Unbalanced mobility and injection of charge carriers in metal-halide perovskite light-emitting devices pose severe limitations to the efficiency and response time of the electroluminescence. Modulation of gate bias in methylammonium lead iodide light-emitting transistors has proven effective to increase the brightness of light emission, up to MHz frequencies. In this work, we developed a new approach to improve charge carrier injection and enhance electroluminescence of perovskite light-emitting transistors by independent control of drain-source and gate-source bias voltages to compensate for space-charge effects. Optimization of bias pulse synchronization induces a fourfold enhancement of the emission intensity. Interestingly, the optimal phase delay between biasing pulses depends on modulation frequency due to the capacitive nature of the devices, which is well captured by numerical simulations of an equivalent electrical circuit. These results provide new insights into the electroluminescence dynamics of AC-driven perovskite light-emitting transistors and demonstrate an effective strategy to optimize device performance through independent control of amplitude, frequency, and phase of the biasing pulses. △ Less

Submitted 23 April, 2023; originally announced April 2023.

Topological Insulator Metamaterials

Authors: Harish N. S. Krishnamoorthy, Alexander M. Dubrovkin, Giorgio Adamo, Cesare Soci

Abstract: Confinement of electromagnetic fields at the subwavelength scale via metamaterial paradigms is an established method to engineer light-matter interaction in most common material systems, from insulators to semiconductors, from metals to superconductors. In recent years, this approach has been extended to the realm of topological materials, providing a new avenue to access nontrivial features of th… ▽ More Confinement of electromagnetic fields at the subwavelength scale via metamaterial paradigms is an established method to engineer light-matter interaction in most common material systems, from insulators to semiconductors, from metals to superconductors. In recent years, this approach has been extended to the realm of topological materials, providing a new avenue to access nontrivial features of their electronic band structure. In this review, we survey various topological material classes from a photonics standpoint, including crystal growth and lithographic structuring methods. We discuss how exotic electronic features such as spin-selective Dirac plasmon polaritons in topological insulators or hyperbolic plasmon polaritons in Weyl semimetals may give rise to unconventional magneto-optic, non-linear and circular photogalvanic effects in metamaterials across the visible to infrared spectrum. Finally, we dwell on how these effects may be dynamically controlled by applying external perturbations in the form of electric and magnetic fields or ultrafast optical pulses. Through these examples and future perspectives, we argue that topological insulator, semimetal and superconductor metamaterials are unique systems to bridge the missing links between nanophotonic, electronic and spintronic technologies. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 56 pages, 20 figures

Photon number resolution without optical mode multiplication

Authors: Anton N. Vetlugin, Filippo Martinelli, Shuyu Dong, Cesare Soci

Abstract: Common methods to achieve photon number resolution rely on fast on-off single-photon detectors in conjunction with temporal or spatial mode multiplexing. Yet, these methods suffer from an inherent trade-off between the efficiency of photon number discrimination and photon detection rate. Here, we introduce a method of photon number resolving detection that overcomes these limitations by replacing… ▽ More Common methods to achieve photon number resolution rely on fast on-off single-photon detectors in conjunction with temporal or spatial mode multiplexing. Yet, these methods suffer from an inherent trade-off between the efficiency of photon number discrimination and photon detection rate. Here, we introduce a method of photon number resolving detection that overcomes these limitations by replacing mode multiplexing with coherent absorption of a single optical mode in a distributed detector array. Distributed coherent absorption ensures complete and uniform absorption of light among the constituent detectors, enabling fast and efficient photon number resolution. As a proof-of-concept, we consider the case of a distributed array of superconducting nanowire single-photon detectors with realistic parameters and show that deterministic absorption and arbitrarily high photon number discrimination efficiency can be achieved by increasing the number of detectors in the array. Photon number resolution without optical mode multiplication provides a simple yet effective method to discriminate an arbitrary number of photons in large arrays of on-off detectors or in smaller arrays of mode multiplexed detectors. △ Less

Submitted 29 October, 2022; originally announced October 2022.

Comments: 17 pages, 8 figures

Electrically driven exciton-polaritons in metal halide perovskite metatransistors

Authors: Yutao Wang, **gyi Tian, Maciej Klein, Giorgio Adamo, Son Tung Ha, Cesare Soci

Abstract: Achieving electrical injection of exciton-polaritons, half-light, half-matter quasiparticles arising from the strong coupling between photonic and excitonic resonances, is a crucial milestone to scale up polaritonic devices such as optical computers, quantum simulators and inversionless lasers. Here we present a new approach to achieve strong coupling between electrically injected excitons and pho… ▽ More Achieving electrical injection of exciton-polaritons, half-light, half-matter quasiparticles arising from the strong coupling between photonic and excitonic resonances, is a crucial milestone to scale up polaritonic devices such as optical computers, quantum simulators and inversionless lasers. Here we present a new approach to achieve strong coupling between electrically injected excitons and photonic bound states in the continuum of a dielectric metasurface monolithically patterned in the channel of a light-emitting transistor. Exciton-polaritons are generated by coupling electrically injected excitons in the gate-induced transport channel with a Bloch mode of the metasurface, and decay into photons emitted from the top surface of the transistor. Thanks to the high-finesse of the metasurface cavity, we achieve a large Rabi splitting of ~200 meV and more than 50-fold enhancement of the polaritonic emission over the intrinsic excitonic emission of the perovskite film. Moreover, we show that the directionality of polaritonic electroluminescence can be dynamically tuned by varying the source-drain bias which controls the radiative recombination zone of the excitons. We argue that this approach provides a new platform to study strong light-matter interaction in dispersion engineered photonic cavities under electrical injection, and paves the way to solution-processed electrically pumped polariton lasers. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Color-Tunable Mixed-Cation Perovskite Single Photon Emitters

Authors: Marianna D'Amato, Qi Ying Tan, Quentin Glorieux, Alberto Bramati, Cesare Soci

Abstract: Quantum photonics technologies like wavelength division multiplexing (WDM) for high-rate quantum key distribution require narrowband, spectrally tunable single photon emitters. Physical methods that rely on the application of large mechanical strain to epitaxial quantum dots or electric and magnetic fields to color centers in 2D metal dichalcogenides provide limited spectral tunability. Here we ad… ▽ More Quantum photonics technologies like wavelength division multiplexing (WDM) for high-rate quantum key distribution require narrowband, spectrally tunable single photon emitters. Physical methods that rely on the application of large mechanical strain to epitaxial quantum dots or electric and magnetic fields to color centers in 2D metal dichalcogenides provide limited spectral tunability. Here we adopt a chemical approach to synthesize a family of colloidal mixed-cation perovskite quantum dots ($\text{Cs}_{1-x}\text{FA}_{x}\text{PbBr}_3$) that show highly photo-stable, compositionally tunable single photon emission at room temperature - spanning more than 30 nm in the visible wavelength spectral range. We find that, tailoring the stoichiometry of the organic formamidinium (FA) cation in all-inorganic cesium lead bromide ($\text{CsPbBr}_3$) perovskite quantum dots detunes the electronic band structure while preserving their excellent single photon emission characteristics. We argue that the mixed-cation perovskite quantum dots studied in this work offer a new platform for the realization of color-tunable single photon emitters that could be readily integrated in a diversity of quantum photonic devices. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Polarization-Tunable Perovskite Light-Emitting Metatransistor

Authors: Maciej Klein, Yutao Wang, **gyi Tian, Son Tung Ha, Ramón Paniagua-Domínguez, Arseniy I. Kuznetsov, Giorgio Adamo, Cesare Soci

Abstract: Emerging immersive visual communication technologies require light sources with complex functionality for dynamic control of polarization, directivity, wavefront, spectrum, and intensity of light. Currently, this is mostly achieved by free space bulk optic elements, limiting the adoption of these technologies. Flat optics based on artificially structured metasurfaces that operate at the sub-wavele… ▽ More Emerging immersive visual communication technologies require light sources with complex functionality for dynamic control of polarization, directivity, wavefront, spectrum, and intensity of light. Currently, this is mostly achieved by free space bulk optic elements, limiting the adoption of these technologies. Flat optics based on artificially structured metasurfaces that operate at the sub-wavelength scale are a viable solution, however their integration into electrically driven devices remains challenging. Here we demonstrate a radically new approach of monolithic integration of a dielectric metasurface into a perovskite light-emitting transistor. We show that nanogratings directly structured on top of the transistor channel yield an 8-fold increase of electroluminescence intensity and dynamic tunability of polarization. This new light-emitting metatransistor device concept opens unlimited opportunities for light management strategies based on metasurface design and integration. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Perovskite quantum dot topological laser

Authors: **gyi Tian, Qi Ying Tan, Yutao Wang, Yihao Yang, Guanghui Yuan, Giorgio Adamo, Cesare Soci

Abstract: Various topological laser concepts have recently enabled the demonstration of robust light-emitting devices that are immune to structural deformations and tolerant to fabrication imperfections. Current realizations of photonic cavities with topological boundaries are often limited by outcoupling issues or poor directionality and require complex design and fabrication that hinder operation at small… ▽ More Various topological laser concepts have recently enabled the demonstration of robust light-emitting devices that are immune to structural deformations and tolerant to fabrication imperfections. Current realizations of photonic cavities with topological boundaries are often limited by outcoupling issues or poor directionality and require complex design and fabrication that hinder operation at small wavelengths. Here we propose a topological cavity design based on interface states between two one-dimensional photonic crystals with distinct Zak phases and demonstrate a lithography-free, single-mode perovskite laser emitting in the green. Few monolayers of solution processed all-inorganic cesium lead halide perovskite quantum dots are used as ultrathin gain medium. The topological laser has planar design with large output aperture, akin to vertical-cavity surface-emitting lasers (VCSELs) and is robust against variations of the thickness of the gain medium, from deeply subwavelength to thick quantum dot films. This experimental observation also unveils the topological nature of VCSELs, that is usually overlooked in the description of conventional Fabry-Perot cavity lasers. The design simplicity and topological characteristics make this perovskite quantum dot laser architecture suitable for low-cost and fabrication tolerant vertical emitting lasers operating across the visible spectral region. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Modelling quantum photonics on a quantum computer

Authors: Anton N. Vetlugin, Cesare Soci, Nikolay I. Zheludev

Abstract: Modelling of photonic devices traditionally involves solving the equations of light-matter interaction and light propagation, and it is restrained by their applicability. Here we demonstrate an alternative modelling methodology by creating a "quantum copy" of the optical device in the quantum computer. As an illustration, we simulate quantum interference of light on a thin absorbing film. Such int… ▽ More Modelling of photonic devices traditionally involves solving the equations of light-matter interaction and light propagation, and it is restrained by their applicability. Here we demonstrate an alternative modelling methodology by creating a "quantum copy" of the optical device in the quantum computer. As an illustration, we simulate quantum interference of light on a thin absorbing film. Such interference can lead to either perfect absorption or total transmission of light through the film, the phenomena attracting attention for data processing applications in classical and quantum information networks. We map behaviour of the photon in the quantum interference experiment to the evolution of a quantum state of transmon, a superconducting charge qubit of the IBM quantum computer. Details of the real optical experiment are flawlessly reproduced on the quantum computer. We argue that superiority of the "quantum copy" methodology shall be apparent in modelling complex multi-photon optical phenomena and devices. △ Less

Submitted 30 November, 2021; originally announced November 2021.

Comments: 6 pages, 3 figures

Optical Rashba effect in a monolithic light-emitting perovskite metasurface

Authors: **gyi Tian, Giorgio Adamo, Hailong Liu, Maciej Klein, Song Han, Hong Liu, Cesare Soci

Abstract: The Rashba effect, i.e., the splitting of electronic spin-polarized bands in the momentum space of a crystal with broken inversion symmetry, has enabled the realization of spin-orbitronic devices, in which spins are manipulated by spin-orbit coupling. In optics, where the helicity of light polarization represents the spin degree of freedom for spin-momentum coupling, the optical Rashba effect is m… ▽ More The Rashba effect, i.e., the splitting of electronic spin-polarized bands in the momentum space of a crystal with broken inversion symmetry, has enabled the realization of spin-orbitronic devices, in which spins are manipulated by spin-orbit coupling. In optics, where the helicity of light polarization represents the spin degree of freedom for spin-momentum coupling, the optical Rashba effect is manifested by the splitting of optical states with opposite chirality in the momentum space. Previous realizations of the optical Rashba effect relied on passive devices determining either the propagation direction of surface plasmons or circularly polarized light into nanostructures, or the directional emission of polarized luminescence from metamaterials hybridized with light-emitting media. Here we demonstrate an active device underpinned by the optical Rashba effect, in which a monolithic halide perovskite metasurface emits highly directional chiral photoluminescence. An all-dielectric metasurface design with broken in-plane inversion symmetry is directly embossed into the high refractive index, light-emitting perovskite film, yielding a degree of circular polarization of photoluminescence of 40% at room temperature - more than one order of magnitude greater than in state of art chiral perovskites. △ Less

Submitted 3 August, 2021; originally announced August 2021.

Phase-change perovskite tunable microlaser

Authors: **gyi Tian, Giorgio Adamo, Hailong Liu, Mengfei Wu, Maciej Klein, Jie Deng, Norman Soo Seng Ang, Ramón Paniagua-Domínguez, Hong Liu, Arseniy I. Kuznetsov, Cesare Soci

Abstract: Since the invention of the laser, adoption of new gain media and device architectures has provided solutions to a variety of applications requiring specific power, size, spectral, spatial, and temporal tunability. Here we introduce a fundamentally new type of tunable semiconductor laser based on a phase-change perovskite metasurface that acts simultaneously as gain medium and optical cavity. As a… ▽ More Since the invention of the laser, adoption of new gain media and device architectures has provided solutions to a variety of applications requiring specific power, size, spectral, spatial, and temporal tunability. Here we introduce a fundamentally new type of tunable semiconductor laser based on a phase-change perovskite metasurface that acts simultaneously as gain medium and optical cavity. As a proof of principle demonstration, we fabricate a subwavelength-thin perovskite metasurface supporting bound states in the continuum (BICs). Upon the perovskite structural phase transitions, both its refractive index and gain vary substantially, inducing fast (1.35 nm/K rate) and broad spectral tunability (>15 nm in the near-infrared), deterministic spatial mode hop** between polarization vortexes, and hysteretic optical bistability of the microlaser. These features highlight the uniqueness of phase-change perovskite tunable lasers, which may find wide applications in compact and low-cost optical multiplexers, sensors, memories, and LIDARs. △ Less

Submitted 12 July, 2021; originally announced July 2021.

Anti-Hong-Ou-Mandel effect with entangled photons

Authors: Anton N. Vetlugin, Ruixiang Guo, Cesare Soci, Nikolay I. Zheludev

Abstract: In the classical Hong-Ou-Mandel (HOM) effect pairs of photons with bosonic (fermionic) spatial wavefunction coalesce (anti-coalesce) when mixed on a lossless beamsplitter. Here we report that the presence of dissipation in the beamsplitter allows the observation of the anti-HOM effect, where bosons anti-coalesce and fermions show coalescent-like behavior. We provide an experimental demonstration o… ▽ More In the classical Hong-Ou-Mandel (HOM) effect pairs of photons with bosonic (fermionic) spatial wavefunction coalesce (anti-coalesce) when mixed on a lossless beamsplitter. Here we report that the presence of dissipation in the beamsplitter allows the observation of the anti-HOM effect, where bosons anti-coalesce and fermions show coalescent-like behavior. We provide an experimental demonstration of the anti-HOM effect for both bosonic and fermionic two-photon entangled states. Beyond its fundamental significance, the anti-HOM effect offers applications in quantum information and metrology where states of entangled photons are dynamically converted. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 10 pages, 4 figures

Topological Insulator Metamaterial with Giant Circular Photogalvanic Effect

Authors: Xinxing Sun, Giorgio Adamo, Mustafa Eginligil, Harish N. S. Krishnamoorthy, Nikolay I. Zheludev, Cesare Soci

Abstract: One of the most striking manifestations of electronic properties of topological insulators is the dependence of the photocurrent direction on the helicity of circularly polarized optical excitation. The helicity dependent photocurrents, underpinned by spin-momentum locking of surface Dirac electrons, are weak and easily overshadowed by bulk contributions. Here we show that the chiral response can… ▽ More One of the most striking manifestations of electronic properties of topological insulators is the dependence of the photocurrent direction on the helicity of circularly polarized optical excitation. The helicity dependent photocurrents, underpinned by spin-momentum locking of surface Dirac electrons, are weak and easily overshadowed by bulk contributions. Here we show that the chiral response can be enhanced by nanostructuring. The tight confinement of electromagnetic fields in the resonant nanostructure enhances the photoexcitation of spin-polarized surface states of topological insulator Bi1.5Sb0.5Te1.8Se1.2, leading to an 11-fold increase of the circular photogalvanic effect and an unprecedented photocurrent dichroism (\r{ho}circ=0.87) at room temperature. The control of spin-transport in topological materials by structural design is a previously unrecognised ability of metamaterials that bridges the gap between nanophotonics and spin-electronics, providing new opportunities for develo** polarization sensitive photodetectors. △ Less

Submitted 20 August, 2020; originally announced August 2020.

Comments: 15 pages, 4 figures, 1 table

Image reconstruction through a multimode fiber with a simple neural network architecture

Authors: Changyan Zhu, Eng Aik Chan, You Wang, Weina Peng, Ruixiang Guo, Baile Zhang, Cesare Soci, Yidong Chong

Abstract: Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably sim… ▽ More Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably simpler neural network architecture, the single hidden layer dense neural network, performs at least as well as previously-used CNNs in terms of image reconstruction fidelity, and is superior in terms of training time and computing resources required. The trained networks can accurately reconstruct MMF images collected over a week after the cessation of the training set, with the dense network performing as well as the CNN over the entire period. △ Less

Submitted 1 September, 2020; v1 submitted 10 June, 2020; originally announced June 2020.

Comments: 17 pages, 10 figures

Metamaterial enhancement of metal-halide perovskite luminescence

Authors: Giorgio Adamo, Harish Krishnamoorthy, Daniele Cortecchia, Bhumika Chaudhary, Venkatram Nalla, Nikolay Zheludev, Cesare Soci

Abstract: Metal-halide perovskites are rapidly emerging as solution-processable optical materials for light emitting applications. Here we adopt a plasmonic metamaterial approach to enhance photoluminescence emission and extraction of methylammonium lead iodide (MAPbI3) thin films, based on the Purcell effect. We show that hybridization of the active metal-halide film with resonant nanoscale sized slits car… ▽ More Metal-halide perovskites are rapidly emerging as solution-processable optical materials for light emitting applications. Here we adopt a plasmonic metamaterial approach to enhance photoluminescence emission and extraction of methylammonium lead iodide (MAPbI3) thin films, based on the Purcell effect. We show that hybridization of the active metal-halide film with resonant nanoscale sized slits carved into a gold film can yield more than one order of magnitude enhancement of luminescence intensity, and nearly threefold reduction of luminescence lifetime. This shows the effectiveness of resonant nanostructures in controlling metal-halide perovskite light emission properties over a tunable spectral range, a viable approach toward highly efficient perovskite light emitting devices and single-photon emitters. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Infrared dielectric metamaterials from high refractive index chalcogenides

Authors: H. N. S. Krishnamoorthy, G. Adamo, J. Yin, V. Savinov, N. I. Zheludev, C. Soci

Abstract: High-index dielectric materials are in great demand for nanophotonic devices and applications, from ultrathin optical elements to metal-free sub-diffraction light confinement and waveguiding. Here we show that chalcogenide topological insulators are particularly apt candidates for dielectric nanophotonic architectures in the infrared spectral range by reporting metamaterial resonances in chalcogen… ▽ More High-index dielectric materials are in great demand for nanophotonic devices and applications, from ultrathin optical elements to metal-free sub-diffraction light confinement and waveguiding. Here we show that chalcogenide topological insulators are particularly apt candidates for dielectric nanophotonic architectures in the infrared spectral range by reporting metamaterial resonances in chalcogenide crystals sustained well inside the mid-infrared, choosing Bi$_2$Te$_3$ as case study within this family of materials. Strong resonant modulation of the incident electromagnetic field is achieved thanks to the exceptionally high refractive index ranging between 7 and 8 throughout the 2-10 $μ$m region. Analysis of the complex mode structure in the metamaterial allude to the excitation of poloidal surface currents which could open pathways for enhanced light-matter interaction and low-loss plasmonic configurations by coupling to the spin-polarized topological surface carriers, thereby providing new opportunities to combine dielectric, plasmonic and magnetic metamaterials in a single platform. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Comments: 21 pages, 6 figures

Phase stabilization of a coherent fibre network by single-photon counting

Authors: Salih Yanikgonul, Ruixiang Guo, Angelos Xomalis, Anton N. Vetlugin, Giorgio Adamo, Cesare Soci, Nikolay I. Zheludev

Abstract: Coherent optical fibre networks are extremely sensitive to thermal, mechanical and acoustic noise, which requires elaborate schemes of phase stabilization with dedicated auxiliary lasers, multiplexers and photodetectors. This is particularly demanding in quantum networks operating at the single-photon level. Here we propose a simple method of phase stabilization based on single-photon counting and… ▽ More Coherent optical fibre networks are extremely sensitive to thermal, mechanical and acoustic noise, which requires elaborate schemes of phase stabilization with dedicated auxiliary lasers, multiplexers and photodetectors. This is particularly demanding in quantum networks operating at the single-photon level. Here we propose a simple method of phase stabilization based on single-photon counting and apply it to quantum fibre networks implementing single-photon interference on a lossless beamsplitter and coherent perfect absorption on a metamaterial absorber. As a proof of principle, we show dissipative single-photon switching with visibility close to 80%. This method can be employed in quantum networks of greater complexity without classical stabilization rigs, potentially increasing efficiency of the quantum channels. △ Less

Submitted 1 November, 2019; originally announced November 2019.

Comments: 4 pages, 4 figures

Large Polaron Generation and Dynamics in 3D Metal-Halide Perovskites

Authors: Walter P. D. Wong, Jun Yin, Bhumika Chaudhary, Chin Xin Yu, Daniele Cortecchia, Shu-Zee A. Lo, Andrew C. Grimsdale, Guglielmo Lanzani, Cesare Soci

Abstract: In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trap** phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional… ▽ More In recent years, metal halide perovskites have generated tremendous interest for optoelectronic applications and their underlying fundamental properties. Due to the large electron-phonon coupling characteristic of soft lattices, self-trap** phenomena are expected to dominate hybrid perovskite photoexcitation dynamics. Yet, while the photogeneration of small polarons was proven in low dimensional perovskites, the nature of polaron excitations in technologically relevant 3D perovskites, and their influence on charge carrier transport, remain elusive. In this study, we used a combination of first principle calculations and advanced spectroscopy techniques spanning the entire optical frequency range to pin down polaron features in 3D metal halide perovskites. Mid-infrared photoinduced absorption shows the photogeneration of states associated to low energy intragap electronic transitions with lifetime up to the ms time scale, and vibrational mode renormalization in both frequency and amplitude. Density functional theory supports the assignment of the spectroscopic features to large polarons leading to new intra gap transitions, hardening of phonon mode frequency, and renormalization of the oscillator strength. Theory provides quantitative estimates of the charge carrier masses and mobilities increase upon polaron formation, confirming experimental results. Overall, this work contributes to complete the scenario of elementary photoexcitations in metal halide perovskites and highlights the importance of polaronic transport in perovskite-based optoelectronic devices. △ Less

Submitted 28 May, 2019; originally announced May 2019.

Nanowire lasers

Authors: C. Couteau, A. Larrue, C. Wilhelm, C. Soci

Abstract: We review principles and trends in the use of semiconductor nanowires (NWs) as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as LEDs, solar cells, and transistors. Intensive research has also been conducted on the use of nanowires for sub-wavelength laser systems that take advantage of the… ▽ More We review principles and trends in the use of semiconductor nanowires (NWs) as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as LEDs, solar cells, and transistors. Intensive research has also been conducted on the use of nanowires for sub-wavelength laser systems that take advantage of their quasi-one-dimensional nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-one-dimensional nanowire systems to realize sub-wavelength lasers with efficient, directional, and low-threshold emission. We then describe the state-of-the-art for nanowire lasers in terms of materials, geometry, and wavelength tunability. Next, we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers in many applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, potentially be electrically driven, and yield a better understanding of intrinsic nanomaterial properties and surface state effects in low-dimensional semiconductor systems. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: Review article. 18 pages

Journal ref: Nanophotonics 4, 90 (2015)

Femtosecond laser inscription of nonlinear photonic circuits in Gallium Lanthanum Sulphide glass

Authors: María Ramos Vázquez, Belén Sotillo, Stefano Rampini, Vibhav Bharadwaj, Behrad Gholipour, Paloma Fernández, Roberta Ramponi, Cesare Soci, Shane M. Eaton

Abstract: We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the lase… ▽ More We report on femtosecond laser writing of single mode optical waveguides in chalcogenide Gallium Lanthanum Sulphide (GLS) glass. A multiscan fabrication process was employed to create waveguides with symmetric single mode guidance and low insertion losses at 800 nm wavelength, compatible with Ti:Sapphire ultrafast lasers. μRaman and X-Ray microanalysis were used to elucidate the origin of the laser-induced refractive index change in GLS. Nonlinear refractive index measurements of the waveguides were performed by finding the optical switching parameters of a directional coupler, demonstrating that the nonlinear properties were preserved, evidencing that GLS is a promising platform for laser-written integrated nonlinear photonics. △ Less

Submitted 27 August, 2018; v1 submitted 15 June, 2018; originally announced June 2018.

Stable biexcitons in two-dimensional metal-halide perovskites with strong dynamic lattice disorder

Authors: Félix Thouin, Stefanie Neutzner, Daniele Cortecchia, Vlad Alexandru Dragomir, Cesare Soci, Teddy Salim, Yeng Ming Lam, Richard Leonelli, Annamaria Petrozza, Ajay Ram Srimath Kandada, Carlos Silva

Abstract: With strongly bound and stable excitons at room temperature, single-layer, two-dimensional organic-inorganic hybrid perovskites are viable semiconductors for light-emitting quantum optoelectronics applications. In such a technological context, it is imperative to comprehensively explore all the factors --- chemical, electronic and structural --- that govern strong multi-exciton correlations. Here,… ▽ More With strongly bound and stable excitons at room temperature, single-layer, two-dimensional organic-inorganic hybrid perovskites are viable semiconductors for light-emitting quantum optoelectronics applications. In such a technological context, it is imperative to comprehensively explore all the factors --- chemical, electronic and structural --- that govern strong multi-exciton correlations. Here, by means of two-dimensional coherent spectroscopy, we examine excitonic many-body effects in pure, single-layer (PEA)$_2$PbI$_4$ (PEA = phenylethylammonium). We determine the binding energy of biexcitons --- correlated two-electron, two-hole quasiparticles --- to be $44 \pm 5$\,meV at room temperature. The extraordinarily high values are similar to those reported in other strongly excitonic two-dimensional materials such as transition-metal dichalchogenides. Importantly, we show that this binding energy increases by $\sim25$\% upon cooling to 5\,K. Our work highlights the importance of multi-exciton correlations in this class of technologically promising, solution-processable materials, in spite of the strong effects of lattice fluctuations and dynamic disorder. △ Less

Submitted 11 February, 2018; v1 submitted 13 December, 2017; originally announced December 2017.

Comments: 37 pages including 4 figures and supplemental information

Journal ref: Phys. Rev. Materials 2, 034001 (2018)

AC-Driven Perovskite Light-Emitting Transistors

Authors: Francesco Maddalena, Xin Yu Chin, Daniele Cortecchia, Annalisa Bruno, Cesare Soci

Abstract: Perovskite light-emitting field-effect transistors (PeLEFETs) provide a versatile device architecture to control transport and electroluminescence properties of hybrid perovskites, enabling injection of high charge carrier density and spatial control of the radiative recombination zone. Ionic screening and organic cation polarization effects typical of metal-halide perovskites, however, critically… ▽ More Perovskite light-emitting field-effect transistors (PeLEFETs) provide a versatile device architecture to control transport and electroluminescence properties of hybrid perovskites, enabling injection of high charge carrier density and spatial control of the radiative recombination zone. Ionic screening and organic cation polarization effects typical of metal-halide perovskites, however, critically affect PeLEFET efficiency and reliability. In this work, we demonstrate a new device operation mode based on high-frequency modulation of the applied voltages, which allows significant reduction of ionic drift/screening in methylammonium lead iodide light-emitting transistors. In optimized top contact PeLEFETs, AC operation results in brighter and more uniform electroluminescence compared to DC-driven devices. Moreover, high frequency modulation enables electroluminescence emission up to room temperature. △ Less

Submitted 5 October, 2017; originally announced October 2017.

Identifying Mirror Symmetry Density with Delay in Spiking Neural Networks

Authors: Jonathan K. George, Cesare Soci, Volker J. Sorger

Abstract: The ability to rapidly identify symmetry and anti-symmetry is an essential attribute of intelligence. Symmetry perception is a central process in human vision and may be key to human 3D visualization. While previous work in understanding neuron symmetry perception has concentrated on the neuron as an integrator, here we show how the coincidence detecting property of the spiking neuron can be used… ▽ More The ability to rapidly identify symmetry and anti-symmetry is an essential attribute of intelligence. Symmetry perception is a central process in human vision and may be key to human 3D visualization. While previous work in understanding neuron symmetry perception has concentrated on the neuron as an integrator, here we show how the coincidence detecting property of the spiking neuron can be used to reveal symmetry density in spatial data. We develop a method for synchronizing symmetry-identifying spiking artificial neural networks to enable layering and feedback in the network. We show a method for building a network capable of identifying symmetry density between sets of data and present a digital logic implementation demonstrating an 8x8 leaky-integrate-and-fire symmetry detector in a field programmable gate array. Our results show that the efficiencies of spiking neural networks can be harnessed to rapidly identify symmetry in spatial data with applications in image processing, 3D computer vision, and robotics. △ Less

Submitted 25 August, 2017; originally announced September 2017.

Comments: 8 pages, 8 figures

Chalcogenide hyperbolic metamaterial with switchable negative refraction

Authors: Harish N. S. Krishnamoorthy, Behrad Gholipour, Nikolay I. Zheludev, Cesare Soci

Abstract: Chalcogenide glasses are exceptional materials that show a wide contrast in optical properties upon phase change and are highly researched for reconfigurable electronic and nanophotonic devices. Here, we report the first proof-of-concept demonstration of a non-volatile, switchable hyperbolic metamaterial based on a chalcogenide glass. By using the $Ge_{2}Sb_{2}Te_{5}$ (GST) alloy as one of the com… ▽ More Chalcogenide glasses are exceptional materials that show a wide contrast in optical properties upon phase change and are highly researched for reconfigurable electronic and nanophotonic devices. Here, we report the first proof-of-concept demonstration of a non-volatile, switchable hyperbolic metamaterial based on a chalcogenide glass. By using the $Ge_{2}Sb_{2}Te_{5}$ (GST) alloy as one of the components of a multilayered nanocomposite structure and exploiting its phase change property, we demonstrate a hyperbolic metamaterial in which the Type-I hyperbolic dispersion $(ε_{\perp} < 0, ε_{\parallel} > 0)$ can be switched from the near infrared to the visible region. This opens up new opportunities for reconfigurable device applications, such as imaging, optical data storage and sensing. △ Less

Submitted 31 March, 2017; originally announced March 2017.

Testbeds for Transition Metal Dichalcogenide Photonics: Efficacy of Light Emission Enhancement in Monomer vs. Dimer Nanoscale Antennae

Authors: Mohammad H. Tahersima, M. Danang Birowosuto, Zhizhen Ma, Ibrahim Sarpkaya, William C. Coley, Michael D. Valentin, I-Hsi Lu, Ke Liu, Yao Zhou, Aimee Martinez, Ingrid Liao, Brandon N. Davis, Joseph Martinez, Sahar Naghibi Alvillar, Dominic Martinez-Ta, Alison Guan, Ariana E. Nguyen, Cesare Soci, Evan Reed, Ludwig Bartels, Volker J. Sorger

Abstract: Monolayer transition metal dichalcogenides are uniquely-qualified materials for photonics because they combine well defined tunable direct band gaps and selfpassivated surfaces without dangling bonds. However, the atomic thickness of these 2D materials results in low photo absorption limiting the achievable photo luminescence intensity. Such emission can, in principle, be enhanced via nanoscale an… ▽ More Monolayer transition metal dichalcogenides are uniquely-qualified materials for photonics because they combine well defined tunable direct band gaps and selfpassivated surfaces without dangling bonds. However, the atomic thickness of these 2D materials results in low photo absorption limiting the achievable photo luminescence intensity. Such emission can, in principle, be enhanced via nanoscale antennae resulting in; a. an increased absorption cross-section enhancing pump efficiency, b. an acceleration of the internal emission rate via the Purcell factor mainly by reducing the antennas optical mode volume beyond the diffraction limit, and c. improved impedance matching of the emitter dipole to the freespace wavelength. Plasmonic dimer antennae show orders of magnitude hot-spot field enhancements when an emitter is positioned exactly at the midgap. However, a 2D material cannot be grown, or easily transferred, to reside in mid-gap of the metallic dimer cavity. In addition, a spacer layer between the cavity and the emissive material is required to avoid non-radiative recombination channels. Using both computational and experimental methods, in this work we show that the emission enhancement from a 2D emitter- monomer antenna cavity system rivals that of dimers at much reduced lithographic effort. We rationalize this finding by showing that the emission enhancement in dimer antennae does not specifically originate from the gap of the dimer cavity, but is an average effect originating from the effective cavity crosssection taken below each optical cavity where the emitting 2D film is located. In particular, we test an array of different dimer and monomer antenna geometries and observe a representative 3x higher emission for both monomer and dimer cavities as compared to intrinsic emission of Chemical Vapor Deposition synthesized WS2 flakes. △ Less

Submitted 26 February, 2017; originally announced February 2017.

Comments: 31 pages, 5 figures

Plasmonics of Topological Insulators at Optical Frequencies

Authors: Jun Yin, Harish N. S. Krishnamoorthy, Giorgio Adamo, Alexander M. Dubrovkin, Yidong D. Chong, Nikolay I. Zheludev, Cesare Soci

Abstract: The development of nanoplasmonic devices, such as plasmonic circuits and metamaterial superlenses in the visible to ultraviolet frequency range, is hampered by the lack of low-loss plasmonic media. Recently, strong plasmonic response was reported in a certain class of topological insulators. Here, we present a first-principles density functional theory analysis of the dielectric functions of topol… ▽ More The development of nanoplasmonic devices, such as plasmonic circuits and metamaterial superlenses in the visible to ultraviolet frequency range, is hampered by the lack of low-loss plasmonic media. Recently, strong plasmonic response was reported in a certain class of topological insulators. Here, we present a first-principles density functional theory analysis of the dielectric functions of topologically insulating quaternary (Bi,Sb)2(Te,Se)3 trichalcogenide compounds. Bulk plasmonic properties, dominated by interband transitions, are observed from 2-3 eV and extend to higher frequencies. Moreover, trichalcogenide compounds are better plasmonic media than gold and silver at blue and UV wavelengths. By analysing thin slabs, we also show that these materials exhibit topologically protected surface states, which are capable of supporting propagating plasmon polariton modes over an extremely broad spectral range, from the visible to the mid-infrared and beyond, owing to a combination of inter- and intra-surface band transitions. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Nonlocal control of dissipation with entangled photons

Authors: Charles Altuzarra, Stefano Vezzoli, Joao Valente, Weibo Gao, Cesare Soci, Daniele Faccio, Christophe Couteau

Abstract: Quantum nonlocality, i.e. the presence of strong correlations in spatially seperated systems which are forbidden by local realism, lies at the heart of quantum communications and quantum computing. Here, we use polarization-entangled photon pairs to demonstrate a nonlocal control of absorption of light in a plasmonic structure. Through the detection of one photon with a polarization-sensitive devi… ▽ More Quantum nonlocality, i.e. the presence of strong correlations in spatially seperated systems which are forbidden by local realism, lies at the heart of quantum communications and quantum computing. Here, we use polarization-entangled photon pairs to demonstrate a nonlocal control of absorption of light in a plasmonic structure. Through the detection of one photon with a polarization-sensitive device, we can almost deterministically prevent or allow absorption of a second, remotely located photon. We demonstrate this with pairs of photons, one of which is absorbed by coupling into a plasmon of a thin metamaterial absorber in the path of a standing wave of an interferometer. Thus, energy dissipation of specific polarization states on a heat-sink is remotely controlled, promising opportunities for probabilistic quantum gating and controlling plasmon-photon conversion and entanglement. △ Less

Submitted 19 January, 2017; originally announced January 2017.

Comments: 5 pages, 2 figures

X-ray Scintillation in Lead Halide Perovskite Crystals

Authors: M. D. Birowosuto, D. Cortecchia, W. Drozdowski, K. Brylew, W. Lachmanski, A. Bruno, C. Soci

Abstract: Current technologies for X-ray detection rely on scintillation from expensive inorganic crystals grown at high-temperature, which so far has hindered the development of large-area scintillator arrays. Thanks to the presence of heavy atoms, solution-grown hybrid lead halide perovskite single crystals exhibit short X-ray absorption length and excellent detection efficiency. Here we compare X-ray sci… ▽ More Current technologies for X-ray detection rely on scintillation from expensive inorganic crystals grown at high-temperature, which so far has hindered the development of large-area scintillator arrays. Thanks to the presence of heavy atoms, solution-grown hybrid lead halide perovskite single crystals exhibit short X-ray absorption length and excellent detection efficiency. Here we compare X-ray scintillator characteristics of three-dimensional (3D) MAPbI3 and MAPbBr3 and two-dimensional (2D) (EDBE)PbCl4 hybrid perovskite crystals. X-ray excited thermoluminescence measurements indicate the absence of deep traps and a very small density of shallow trap states, which lessens after-glow effects. All perovskite single crystals exhibit high X-ray excited luminescence yields of >120,000 photons/MeV at low temperature. Although thermal quenching is significant at room temperature, the large exciton binding energy of 2D (EDBE)PbCl4 significantly reduces thermal effects compared to 3D perovskites, and moderate light yield of 9,000 photons/MeV can be achieved even at room temperature. This highlights the potential of 2D metal halide perovskites for large-area and low-cost scintillator devices for medical, security and scientific applications. △ Less

Submitted 17 November, 2016; originally announced November 2016.

Comments: 32 pages, 13 figures

Journal ref: Scientific Reports 6 (2016) 37254

Polaron Self-localization in White-light Emitting Hybrid Perovskites

Authors: Daniele Cortecchia, Jun Yin, Annalisa Bruno, Shu-Zee Alencious Lo, Gagik G. Gurzadyan, Subodh Mhaisalkar, Jean-Luc Brédas, Cesare Soci

Abstract: Two-dimensional (2D) perovskites with general formula $APbX_4$ are attracting increasing interest as solution processable, white-light emissive materials. Recent studies have shown that their broadband emission is related to the formation of intra-gap color centers; however, the nature and dynamics of the emissive species have remained elusive. Here we show that the broadband photoluminescence of… ▽ More Two-dimensional (2D) perovskites with general formula $APbX_4$ are attracting increasing interest as solution processable, white-light emissive materials. Recent studies have shown that their broadband emission is related to the formation of intra-gap color centers; however, the nature and dynamics of the emissive species have remained elusive. Here we show that the broadband photoluminescence of the 2D perovskites $(EDBE)PbCl_4$ and $(EDBE)PbBr_4$ stems from the localization of small polarons within the lattice distortion field. Using a combination of spectroscopic techniques and first-principles calculations, we infer the formation of ${Pb_2}^{3+}$, $Pb^{3+}$, and ${X_2}^-$ (where X=Cl or Br) species confined within the inorganic perovskite framework. Due to strong Coulombic interactions, these species retain their original excitonic character and form self-trapped polaron-excitons acting as radiative color centers. These findings are expected to be applicable to a broad class of white-light emitting perovskites with large polaron relaxation energy. △ Less

Submitted 30 September, 2016; v1 submitted 3 March, 2016; originally announced March 2016.

Comments: 34 pages, 15 figures, 3 tables

Coherent perfect absorption in deeply subwavelength films in the single photon regime

Authors: Thomas Roger, Stefano Vezzosi, Eliot Bolduc, Joao Valente, Julius J. F. Heitz, John Jeffers, Cesare Soci, Jonathan Leach, Christophe Couteau, Nikolay Zheludev, Daniele Faccio

Abstract: The technologies of heating, photovoltaics, water photocatalysis and artificial photosynthesis depend on the absorption of light and novel approaches such as coherent absorption from a standing wave promise total dissipation of energy. Extending the control of absorption down to very low light levels and eventually to the single photon regime is of great interest yet remains largely unexplored. He… ▽ More The technologies of heating, photovoltaics, water photocatalysis and artificial photosynthesis depend on the absorption of light and novel approaches such as coherent absorption from a standing wave promise total dissipation of energy. Extending the control of absorption down to very low light levels and eventually to the single photon regime is of great interest yet remains largely unexplored. Here we demonstrate the coherent absorption of single photons in a deeply sub-wavelength 50% absorber. We show that while absorption of photons from a travelling wave is probabilistic, standing wave absorption can be observed deterministically, with nearly unitary probability of coupling a photon into a mode of the material, e.g. a localised plasmon when this is a metamaterial excited at the plasmon resonance. These results bring a better understanding of the coherent absorption process, which is of central importance for light harvesting, detection, sensing and photonic data processing applications. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 13 pages, 5 figures, Published in Nature Communications: 10.1038/ncomms8031

Journal ref: Nature Communications, 6:7031 (2015)

GaAs/AlGaAs Nanowire Photodetector

Authors: X. Dai, S. Zhang, Z. Wang, G. Adamo, H. Liu, Y. Huang, C. Couteau, C. Soci

Abstract: We demonstrate an efficient core-shell GaAs/AlGaAs nanowire photodetector operating at room temperature. The design of this nanoscale detector is based on a type-I heterostructure combined with a metal-semiconductor-metal (MSM) radial architecture, in which built-in electric fields at the semiconductor heterointerface and at the metal/semiconductor Schottky contact promote photogenerated charge se… ▽ More We demonstrate an efficient core-shell GaAs/AlGaAs nanowire photodetector operating at room temperature. The design of this nanoscale detector is based on a type-I heterostructure combined with a metal-semiconductor-metal (MSM) radial architecture, in which built-in electric fields at the semiconductor heterointerface and at the metal/semiconductor Schottky contact promote photogenerated charge separation, enhancing photosensitivity. The spectral photoconductive response shows that the nanowire supports resonant optical modes in the near-infrared region, which lead to large photocurrent density in agreement with the predictions of electromagnetic and transport computational models. The single nanowire photodetector shows remarkable peak photoresponsivity of 0.57 A/W, comparable to large-area planar GaAs photodetectors on the market, and a high detectivity of 7.2 10^10 cm\sqrt{Hz}/W at λ=855 nm. This is promising for the design of a new generation of highly sensitive single nanowire photodetectors by controlling optical mode confinement, bandgap, density of states, and electrode engineering. △ Less

Submitted 10 January, 2016; originally announced January 2016.

Journal ref: Nano Lett. 14, 2688 (2014)

Quantum super-oscillation of a single photon

Authors: Guanghui Yuan, Stefano Vezzoli, Charles Altuzarra, Edward T. F. Rogers, Christophe Couteau, Cesare Soci, Nikolay I. Zheludev

Abstract: Super-oscillation is a counter-intuitive phenomenon describing localized fast variations of functions and fields that happen at frequencies higher than the highest Fourier component of their spectra. The physical implications of the effect have been studied in information theory and optics of classical fields, and have been used in super-resolution imaging. As a general phenomenon of wave dynamics… ▽ More Super-oscillation is a counter-intuitive phenomenon describing localized fast variations of functions and fields that happen at frequencies higher than the highest Fourier component of their spectra. The physical implications of the effect have been studied in information theory and optics of classical fields, and have been used in super-resolution imaging. As a general phenomenon of wave dynamics, super-oscillations have also been predicted to exist in quantum wavefunctions. Here we report the first experimental demonstration of super-oscillatory behavior of a single quantum object, a photon. The super-oscillatory behavior is demonstrated by tight localization of the photon wavefunction after focusing with a dedicated slit mask designed to create an interference pattern with a sub-wavelength hotspot. The observed hotspot of the single-photon wavefunction is demonstrably smaller than the smallest hotspots that could have been created by the highest-frequency free-space wavevectors available as the result of scattering from the mask. △ Less

Submitted 13 October, 2015; originally announced October 2015.

Comments: 21pages, 5 figures

Journal ref: Light: Science & Applications volume 5, page e16127 (2016)

Broadband tunable hybrid photonic crystal-nanowire light emitter

Authors: Christophe E. Wilhelm, M. Iqbal Bakti Utama, Qihua Xiong, Cesare Soci, Gaëlle Lehoucq, Daniel Dolfi, Alfredo De Rossi, Sylvain Combrié

Abstract: We integrate about 100 single Cadmium Selenide semiconductor nanowires in self-standing Silicon Nitride photonic crystal cavities in a single processing run. Room temperature measurements reveal a single narrow emission linewidth, corresponding to a Q-factor as large as 5000. By varying the structural parameters of the photonic crystal, the peak wavelength is tuned, thereby covering the entire emi… ▽ More We integrate about 100 single Cadmium Selenide semiconductor nanowires in self-standing Silicon Nitride photonic crystal cavities in a single processing run. Room temperature measurements reveal a single narrow emission linewidth, corresponding to a Q-factor as large as 5000. By varying the structural parameters of the photonic crystal, the peak wavelength is tuned, thereby covering the entire emission spectral range of the active material. A very large spectral range could be covered by heterogeneous integration of different active materials. △ Less

Submitted 25 September, 2015; originally announced September 2015.

Lead Iodide Perovskite Light-Emitting Field-Effect Transistor

Authors: Xin Yu Chin, Daniele Cortecchia, Jun Yin, Annalisa Bruno, Cesare Soci

Abstract: Despite the widespread use of solution-processable hybrid organic-inorganic perovskites in photovoltaic and light-emitting applications, determination of their intrinsic charge transport parameters has been elusive due to the variability of film preparation and history-dependent device performance. Here we show that screening effects associated to ionic transport can be effectively eliminated by l… ▽ More Despite the widespread use of solution-processable hybrid organic-inorganic perovskites in photovoltaic and light-emitting applications, determination of their intrinsic charge transport parameters has been elusive due to the variability of film preparation and history-dependent device performance. Here we show that screening effects associated to ionic transport can be effectively eliminated by lowering the operating temperature of methylammonium lead iodide perovskite (CH3NH3PbI3) field-effect transistors (FETs). Field-effect carrier mobility is found to increase by almost two orders of magnitude below 200 K, consistent with phonon scattering limited transport. Under balanced ambipolar carrier injection, gate-dependent electroluminescence is also observed from the transistor channel, with spectra revealing the tetragonal to orthorhombic phase transition. This first demonstration of CH3NH3PbI3 light-emitting FETs provides intrinsic transport parameters to guide materials and solar cell optimization, and will drive the development of new electro-optic device concepts, such as gated light emitting diodes and lasers operating at room temperature. △ Less

Submitted 19 January, 2015; originally announced January 2015.

Computing matrix inversion with optical networks

Authors: Kan Wu, Cesare Soci, Perry ** Shum, Nikolay I. Zheludev

Abstract: With this paper we bring about a discussion on the computing potential of complex optical networks and provide experimental demonstration that an optical fiber network can be used as an analog processor to calculate matrix inversion. A 3x3 matrix is inverted as a proof-of-concept demonstration using a fiber network containing three nodes and operating at telecomm wavelength. For an NxN matrix, the… ▽ More With this paper we bring about a discussion on the computing potential of complex optical networks and provide experimental demonstration that an optical fiber network can be used as an analog processor to calculate matrix inversion. A 3x3 matrix is inverted as a proof-of-concept demonstration using a fiber network containing three nodes and operating at telecomm wavelength. For an NxN matrix, the overall solving time (including setting time of the matrix elements and calculation time of inversion) scales as O(N^2), whereas matrix inversion by most advanced computer algorithms requires ~O(N^2.37) computational time. For well-conditioned matrices, the error of the inversion performed optically is found to be less than 3%, limited by the accuracy of measurement equipment. △ Less

Submitted 15 September, 2013; originally announced September 2013.

Comments: 5 pages

Band structure and optical properties of opal photonic crystals

Authors: E. Pavarini, L. C. Andreani, C. Soci, M. Galli, F. Marabelli, D. Comoretto

Abstract: A theoretical approach for the interpretation of reflectance spectra of opal photonic crystals with fcc structure and (111) surface orientation is presented. It is based on the calculation of photonic bands and density of states corresponding to a specified angle of incidence in air. The results yield a clear distinction between diffraction in the direction of light propagation by (111) family p… ▽ More A theoretical approach for the interpretation of reflectance spectra of opal photonic crystals with fcc structure and (111) surface orientation is presented. It is based on the calculation of photonic bands and density of states corresponding to a specified angle of incidence in air. The results yield a clear distinction between diffraction in the direction of light propagation by (111) family planes (leading to the formation of a stop band) and diffraction in other directions by higher-order planes (corresponding to the excitation of photonic modes in the crystal). Reflectance measurements on artificial opals made of self-assembled polystyrene spheres are analyzed according to the theoretical scheme and give evidence of diffraction by higher-order crystalline planes in the photonic structure. △ Less

Submitted 3 May, 2005; originally announced May 2005.

Comments: to appear in PRB

Journal ref: Phys. Rev. B 72, 045102 (2005)