-
Measurement and assignment of J = 5 to 9 rotational energy levels in the 9070-9370 cm$^{-1}$ range of methane using optical frequency comb double-resonance spectroscopy
Authors:
Adrian Hjältén,
Vinicius Silva de Oliveira,
Isak Silander,
Andrea Rosina,
Michael Rey,
Lucile Rutkowski,
Grzegorz Soboń,
Kevin K. Lehmann,
Aleksandra Foltynowicz
Abstract:
We use optical-optical double-resonance (OODR) spectroscopy with a continuous wave (CW) pump and a cavity-enhanced frequency comb probe to measure high rotational energy levels of methane in the upper part of the triacontad polyad (P6). A high-power CW optical parametric oscillator, tunable around 3000 cm$^{-1}$, is consecutively locked to the P(7, A$_2$), Q(7, A$_2$), R(7, A$_2$), and Q(6, F$_2$)…
▽ More
We use optical-optical double-resonance (OODR) spectroscopy with a continuous wave (CW) pump and a cavity-enhanced frequency comb probe to measure high rotational energy levels of methane in the upper part of the triacontad polyad (P6). A high-power CW optical parametric oscillator, tunable around 3000 cm$^{-1}$, is consecutively locked to the P(7, A$_2$), Q(7, A$_2$), R(7, A$_2$), and Q(6, F$_2$) transitions in the $ν$$_3$ band, and a comb covering the 5800-6100 cm$^{-1}$ range probes sub-Doppler ladder-type transitions from the pumped levels with J' = 6 to 8, respectively. We report 118 probe transitions in the 3$ν$$_3$ $\leftarrow$ $ν$$_3$ spectral range with uncertainties down to 300 kHz (1 x 10$^{-5}$ cm$^{-1}$), reaching 84 unique final states in the 9070-9370 cm$^{-1}$ range with rotational quantum numbers J between 5 and 9. We assign these states using combination differences and by comparison to theoretical predictions from a new ab initio-based effective Hamiltonian and dipole moment operator. This is the first line-by-line experimental verification of theoretical predictions for these hot-band transitions, and we find a better agreement of transition wavenumbers with the new calculations compared to the TheoReTS/HITEMP and ExoMol databases. We also compare the relative intensities and find an overall good agreement with all three sets of predictions. Finally, we report the wavenumbers of 27 transitions in the 2$ν$$_3$ spectral range, observed as V-type transitions from the ground state, and compare them to the new Hamiltonian, HITRAN2020, ExoMol and the WKMLC line lists.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Efficient multiphoton microscopy with picosecond laser pulses
Authors:
Katarzyna Kunio,
Jakub Bogusławski,
Grzegorz Soboń
Abstract:
Multiphoton microscopes employ femtosecond fiber lasers as excitation sources, providing a smaller footprint and easier maintenance than solid-state lasers while ensuring ultrashort pulse duration and high peak power. However, such short pulses are significantly more susceptible to broadening in a microscope's highly dispersive optical elements and require careful dispersion management, otherwise…
▽ More
Multiphoton microscopes employ femtosecond fiber lasers as excitation sources, providing a smaller footprint and easier maintenance than solid-state lasers while ensuring ultrashort pulse duration and high peak power. However, such short pulses are significantly more susceptible to broadening in a microscope's highly dispersive optical elements and require careful dispersion management, otherwise decreasing excitation efficiency. Here, we show that efficient excitation is possible using picosecond pulses with a reduced repetition rate. We have developed a high-energy Yb:fiber laser with an integrated pulse picker unit and compared its performance in multiphoton microscopy for two different settings: 205 fs pulse duration at 15 MHz, and 10 ps at 0.3 MHz. Ensuring the same duty cycle and average power for both pulse trains, we have shown that picosecond pulses with a reduced repetition frequency can produce significantly higher pixel intensities. These findings proved that the temporal compression of fiber lasers is not always efficient, and it can be omitted by using a smaller and easier-to-use all-fiber setup.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Intracavity filtering in SESAM mode-locked fiber lasers: soliton effects and noise performance
Authors:
Jakub Bogusławski,
Łukasz Sterczewski,
Dorota Stachowiak,
Grzegorz Soboń
Abstract:
We characterized and analyzed the effect of intracavity spectral filtering in the Er:fiber laser mode-locked with a semiconductor saturable absorber mirror (SESAM). We studied the dispersive properties of bandpass filters and their influence on the characteristics of generated soliton pulses. Our analysis showed that various sideband structures were induced by the filter dispersion profiles and sh…
▽ More
We characterized and analyzed the effect of intracavity spectral filtering in the Er:fiber laser mode-locked with a semiconductor saturable absorber mirror (SESAM). We studied the dispersive properties of bandpass filters and their influence on the characteristics of generated soliton pulses. Our analysis showed that various sideband structures were induced by the filter dispersion profiles and shaped through the interaction of the soliton with the dispersive wave. In addition, intracavity filtering improved the intensity and phase noise of the laser significantly, and we showed optimal filtering conditions for both types of noise. By adding a 10 nm bandpass filter to the laser resonator, the intensity and phase noise were improved 2- and 2.6 times, respectively.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Amplification of femtosecond pulses with AI-assisted spectral phase modulation
Authors:
Mikołaj Krakowski,
Alicja Kwaśny,
Grzegorz Soboń
Abstract:
We report our investigation on ultrashort laser pulse optimization using an AI algorithm in a system consisting of a mode-locked oscillator, a spectral phase shaper, and a highly nonlinear amplifier. We analyzed the performance of the pulse optimization process as a function of two main parameters: the resolution of spectral phase modulation and the number of agents in the algorithm. We showed tha…
▽ More
We report our investigation on ultrashort laser pulse optimization using an AI algorithm in a system consisting of a mode-locked oscillator, a spectral phase shaper, and a highly nonlinear amplifier. We analyzed the performance of the pulse optimization process as a function of two main parameters: the resolution of spectral phase modulation and the number of agents in the algorithm. We showed that the algorithm could find an optimum phase profile for the seed pulse, which allowed for a reduction of the FWHM of the amplified pulse by 10 fs (from 46 to 36 fs), and significantly reduced the intensity of the side-pulse by a factor of 4.6. Importantly, the algorithm used does not require any training and optimizes the pulse shape without any knowledge about the input pulse parameters or the parameters of the amplifier. We believe the proposed system might be a convenient test bed for evaluating various AI-based algorithms in a pulse optimization task.
△ Less
Submitted 31 December, 2023;
originally announced January 2024.
-
Increasing brightness in multiphoton microscopy with low-repetition-rate, wavelength-tunable femtosecond fiber laser
Authors:
Jakub Bogusławski,
Alicja Kwaśny,
Dorota Stachowiak,
Grzegorz Soboń
Abstract:
Many experiments in biological and medical sciences currently use multiphoton microscopy as a core imaging technique. To date, solid-state lasers are most commonly used as excitation beam sources. However, the most demanding applications require precisely adjusted excitation laser parameters to enhance image quality. Still, the lag in develo** easy-to-use laser sources with tunable output parame…
▽ More
Many experiments in biological and medical sciences currently use multiphoton microscopy as a core imaging technique. To date, solid-state lasers are most commonly used as excitation beam sources. However, the most demanding applications require precisely adjusted excitation laser parameters to enhance image quality. Still, the lag in develo** easy-to-use laser sources with tunable output parameters makes it challenging. Here, we show that manipulating the temporal and spectral properties of the excitation beam can significantly improve the quality of images. We have developed a wavelength-tunable femtosecond fiber laser that operates within the 760 - 800 nm spectral range and produces ultrashort pulses (below 70 fs) with a clean temporal profile and high pulse energy (1 nJ). The repetition rate could be easily adjusted using an integrated pulse picker unit within the 1 - 25 MHz range and without strongly influencing other parameters of the generated pulses. We integrated the laser with a two-photon excited fluorescence (TPEF) scanning laser microscope and investigated the effect of tunable wavelength and reducing the pulse repetition rate on the quality of obtained images. Using our laser, we substantially improved the images brightness and penetration depth of native fluorescence and stained samples compared with a standard fiber laser. Our results will contribute to develo** imaging techniques using lower average laser power and broader use of tailored fiber-based sources.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
Sub-Doppler optical-optical double-resonance spectroscopy using a cavity-enhanced frequency comb probe
Authors:
Vinicius Silva de Oliveira,
Isak Silander,
Lucile Rutkowski,
Grzegorz Soboń,
Ove Axner,
Kevin K. Lehmann,
Aleksandra Foltynowicz
Abstract:
Accurate parameters of molecular hot-band transitions, i.e., those starting from vibrationally excited levels, are needed to accurately model high-temperature spectra in astrophysics and combustion, yet laboratory spectra measured at high temperatures are often unresolved and difficult to assign. Optical-optical double-resonance (OODR) spectroscopy allows the measurement and assignment of individu…
▽ More
Accurate parameters of molecular hot-band transitions, i.e., those starting from vibrationally excited levels, are needed to accurately model high-temperature spectra in astrophysics and combustion, yet laboratory spectra measured at high temperatures are often unresolved and difficult to assign. Optical-optical double-resonance (OODR) spectroscopy allows the measurement and assignment of individual hot-band transitions from selectively pumped energy levels without the need to heat the sample. However, previous demonstrations lacked either sufficient resolution, spectral coverage, absorption sensitivity, or frequency accuracy. Here we demonstrate OODR spectroscopy using a cavity-enhanced frequency comb probe that combines all these advantages. We detect and assign sub-Doppler transitions in the spectral range of the 3$ν$${_3}$${\leftarrow}$$ν$${_3}$ resonance of methane with frequency precision and sensitivity more than an order of magnitude better than before. This technique will provide high-accuracy data about excited states of a wide range of molecules that is urgently needed for theoretical modeling of high-temperature data and cannot be obtained using other methods.
△ Less
Submitted 13 November, 2023; v1 submitted 6 July, 2023;
originally announced July 2023.
-
Optical frequency comb Fourier transform spectroscopy of formaldehyde in the 1250 to 1390 cm$^{-1}$ range: experimental line list and improved MARVEL analysis
Authors:
Matthias Germann,
Adrian Hjältén,
Jonathan Tennyson,
Sergei N. Yurchenko,
Iouli E. Gordon,
Christian Pett,
Isak Silander,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use optical frequency comb Fourier transform spectroscopy to record high-resolution, low-pressure, room-temperature spectra of formaldehyde (H$_2$$^{12}$C$^{16}$O) in the range of 1250 to 1390 cm$^{-1}$. Through line-by-line fitting, we retrieve line positions and intensities of 747 rovibrational transitions: 558 from the $ν_6$ band, 129 from the $ν_4$ band, and 14 from the $ν_3$ band, as well…
▽ More
We use optical frequency comb Fourier transform spectroscopy to record high-resolution, low-pressure, room-temperature spectra of formaldehyde (H$_2$$^{12}$C$^{16}$O) in the range of 1250 to 1390 cm$^{-1}$. Through line-by-line fitting, we retrieve line positions and intensities of 747 rovibrational transitions: 558 from the $ν_6$ band, 129 from the $ν_4$ band, and 14 from the $ν_3$ band, as well as 46 from four different hot bands. We incorporate the accurate and precise line positions (0.4 MHz median uncertainty) into the MARVEL (measured active vibration-rotation energy levels) analysis of the H$_2$CO spectrum. This increases the number of MARVEL-predicted energy levels by 82 and of rovibrational transitions by 5382, and substantially reduces uncertainties of MARVEL-derived H$_2$CO energy levels over a large range: from pure rotational levels below 200 cm$^{-1}$ up to multiply excited vibrational levels at 6000 cm$^{-1}$. This work is an important step toward filling the gaps in formaldehyde data in the HITRAN database.
△ Less
Submitted 5 October, 2023; v1 submitted 21 June, 2023;
originally announced June 2023.
-
Soliton trap** and orthogonal Raman scattering in a birefringent microstructured fiber
Authors:
Karolina Stefańska,
Sylwia Majchrowska,
Karolina Gemza,
Grzegorz Soboń,
Jarosław Sotor,
Paweł Mergo,
Karol Tarnowski,
Tadeusz Martynkien
Abstract:
We report on trapped pulse generation in birefringent microstructured optical fiber. Linearly polarized fs pulses are injected into the microstructured fiber in anomalous dispersion regime. We observed experimentally that soliton pulse polarized along the fast fiber axis partially transfers its energy to the orthogonal polarization. The generated pulse is amplified through the orthogonal Raman gai…
▽ More
We report on trapped pulse generation in birefringent microstructured optical fiber. Linearly polarized fs pulses are injected into the microstructured fiber in anomalous dispersion regime. We observed experimentally that soliton pulse polarized along the fast fiber axis partially transfers its energy to the orthogonal polarization. The generated pulse is amplified through the orthogonal Raman gain. The two polarization components are located at group-velocity matched wavelengths. The experimental works are supported with numerical simulations. The obtained results are important for the light sources using self-frequency shifted solitons in applications demanding high polarization purity.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
A methane line list with sub-MHz accuracy in the 1250 to 1380 cm-1 range from optical frequency comb Fourier transform spectroscopy
Authors:
Matthias Germann,
Adrian Hjältén,
Vincent Boudon,
Cyril Richard,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use a Fourier transform spectrometer based on a difference frequency generation optical frequency comb to measure high-resolution, low-pressure, room-temperature spectra of methane in the 1250 - 1380 cm$^{-1}$ range. From these spectra, we retrieve line positions and intensities of 678 lines of two isotopologues: 157 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band, 131 lines from the…
▽ More
We use a Fourier transform spectrometer based on a difference frequency generation optical frequency comb to measure high-resolution, low-pressure, room-temperature spectra of methane in the 1250 - 1380 cm$^{-1}$ range. From these spectra, we retrieve line positions and intensities of 678 lines of two isotopologues: 157 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band, 131 lines from the $^{13}$CH${_4}$ $ν$${_4}$ fundamental band, as well as 390 lines from two $^{12}$CH${_4}$ hot bands, $ν$${_2}$ + $ν$${_4}$ - $ν$${_2}$ and 2$ν$${_4}$ - $ν$${_4}$. For another 165 lines from the $^{12}$CH${_4}$ $ν$${_4}$ fundamental band we retrieve line positions only. The uncertainties of the line positions range from 0.19 to 2.3 MHz, and their median value is reduced by a factor of 18 and 59 compared to the previously available data for the $^{12}$CH${_4}$ fundamental and hot bands, respectively, obtained from conventional FTIR absorption measurements. The new line positions are included in the global models of the spectrum of both methane isotopologues, and the fit residuals are reduced by a factor of 8 compared to previous absorption data, and 20 compared to emission data. The experimental line intensities have relative uncertainties in the range of 1.5 - 7.7%, similar to those in the previously available data; 235 new $^{12}$CH${_4}$ line intensities are included in the global model.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Optical Frequency Comb Fourier Transform Spectroscopy of $^{14}$N$_2$$^{16}$O at 7.8 μm
Authors:
Adrian Hjältén,
Matthias Germann,
Karol Krzempek,
Arkadiusz Hudzikowski,
Aleksander Głuszek,
Dorota Tomaszewska,
Grzegorz Soboń,
Aleksandra Foltynowicz
Abstract:
We use a Fourier transform spectrometer based on a compact mid-infrared difference frequency generation comb source to perform broadband high-resolution measurements of nitrous oxide, $^{14}$N$_2$$^{16}$O, and retrieve line center frequencies of the $ν$$_1$ fundamental band and the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band. The spectrum spans 90 cm$^{-1}$ around 1285 cm$^{-1}$ with a sample point spaci…
▽ More
We use a Fourier transform spectrometer based on a compact mid-infrared difference frequency generation comb source to perform broadband high-resolution measurements of nitrous oxide, $^{14}$N$_2$$^{16}$O, and retrieve line center frequencies of the $ν$$_1$ fundamental band and the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band. The spectrum spans 90 cm$^{-1}$ around 1285 cm$^{-1}$ with a sample point spacing of 3 ${\times}$ 10$^{-4}$ cm$^{-1}$ (9 MHz). We report line positions of 72 lines in the $ν$$_1$ fundamental band between P(37) and R(38), and 112 lines in the $ν$$_1$ + $ν$$_2$ - $ν$$_2$ hot band (split into two components with e/f rotationless parity) between P(34) and R(33), with uncertainties in the range of 90-600 kHz. We derive upper state constants of both bands from a fit of the effective ro-vibrational Hamiltonian to the line center positions. For the fundamental band, we observe excellent agreement in the retrieved line positions and upper state constants with those reported in a recent study by AlSaif et al. using a comb-referenced quantum cascade laser [J Quant Spectrosc Radiat Transf, 2018;211:172-178]. We determine the origin of the hot band with precision one order of magnitude better than previous work based on FTIR measurements by Toth [http://mark4sun.jpl.nasa.gov/n2o.html], which is the source of the HITRAN2016 data for these bands.
△ Less
Submitted 4 May, 2021; v1 submitted 5 March, 2021;
originally announced March 2021.
-
Dual-wavelength pumped highly birefringent microstructured silica fiber for widely tunable soliton self-frequency shift
Authors:
Olga Szewczyk,
Piotr Pala,
Karol Tarnowski,
Jacek Olszewski,
Francisco Senna Vieira,
Chuang Lu,
Aleksandra Foltynowicz,
Pawel Mergo,
Jaroslaw Sotor,
Grzegorz Sobon,
Tadeusz Martynkien
Abstract:
We report the design of a microstructured silica-based fiber for widely tunable soliton self-frequency shift, suitable for pum** with two most common fiber laser wavelengths: 1.04 μm and 1.55 μm. Depending on the pump source, the output spectrum can be continuously tuned up to 1.67 μm (pump at 1.04 μm) or 1.95 μm (pump at 1.55 μm) in the same 1.5 m-long fiber sample, with pump-to-soliton convers…
▽ More
We report the design of a microstructured silica-based fiber for widely tunable soliton self-frequency shift, suitable for pum** with two most common fiber laser wavelengths: 1.04 μm and 1.55 μm. Depending on the pump source, the output spectrum can be continuously tuned up to 1.67 μm (pump at 1.04 μm) or 1.95 μm (pump at 1.55 μm) in the same 1.5 m-long fiber sample, with pump-to-soliton conversion efficiency higher than 20%. The fiber is highly birefringent, which results in an excellent polarization extinction ratio of the soliton, reaching 26 dB. The shifted solitons have a high degree of coherence confirmed by pulse-to-pulse interference measurement. The available soliton tuning range covers the wavelengths inaccessible for fiber lasers, e.g., 1.3 μm and 1.7 μm, highly important for multi-photon microscopy and imaging. Our work shows that it is possible to design and fabricate one universal optical fiber that supports soliton shift when pumped at two different wavelengths separated by over 500 nm.
△ Less
Submitted 4 February, 2021; v1 submitted 28 November, 2020;
originally announced November 2020.
-
Dispersion management of a nonlinear amplifying loop mirror-based Erbium-doped fiber laser
Authors:
Zbigniew Łaszczych,
Grzegorz Soboń
Abstract:
We report an investigation of dispersion management of an all-polarization maintaining Er-fiber oscillator mode-locked via nonlinear amplification loop mirror in a figure-nine cavity configuration with two output ports. The performance of the laser was investigated within the net cavity dispersion ranging from -0.034 ps2 to +0.006 ps2. We show that the spectral and temporal phase of the pulses at…
▽ More
We report an investigation of dispersion management of an all-polarization maintaining Er-fiber oscillator mode-locked via nonlinear amplification loop mirror in a figure-nine cavity configuration with two output ports. The performance of the laser was investigated within the net cavity dispersion ranging from -0.034 ps2 to +0.006 ps2. We show that the spectral and temporal phase of the pulses at both figure-nine outputs have clearly different characteristics. One of the laser outputs provides pulses with significantly better quality; nonetheless, the rejection output also offers ultrashort pulses with broad spectra. Pulses as short as 79 fs with an energy of 83 pJ were generated directly from the laser in the near-zero dispersion regime.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Frequency-doubled femtosecond Er-doped fiber laser for two-photon excited fluorescence imaging
Authors:
Dorota Stachowiak,
Jakub Bogusławski,
Aleksander Głuszek,
Zbigniew Łaszczych,
Maciej Wojtkowski,
Grzegorz Soboń
Abstract:
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker u…
▽ More
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker unit built-in within the amplifier chain, directly providing transform-limited pulses for any chosen repetition rate between 1 and 12 MHz. We employed the laser source to drive a scanning two-photon excited fluorescence microscope for ex vivo rat skin and other samples imaging at various pulse repetition rates. Due to compactness, ease of operation, and suitable pulse characteristics the laser source can be considered as an attractive alternative for Ti:sapphire laser in biomedical imaging.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Compact mode-locked Er-doped fiber laser for broadband cavity-enhanced spectroscopy
Authors:
Aleksander Głuszek,
Francisco Senna Vieira,
Arkadiusz Hudzikowski,
Adam Wąż,
Jarosław Sotor,
Aleksandra Foltynowicz,
Grzegorz Soboń
Abstract:
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tunin…
▽ More
We report the design and characteristics of a simple and compact mode-locked Er-doped fiber laser and its application to broadband cavity-enhanced spectroscopy. The graphene mode-locked polarization maintaining oscillator is thermally stabilized and equipped with three actuators that control the repetition rate: fast and slow fiber stretchers, and metal-coated fiber section. This allows wide tuning of the repetition rate and its stabilization to an external reference source. The applicability of the laser to molecular spectroscopy is demonstrated by detecting CO2 in air using continuous-filtering Vernier spectroscopy.
△ Less
Submitted 28 April, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Sub-Doppler Double-Resonance Spectroscopy of Methane Using a Frequency Comb Probe
Authors:
Aleksandra Foltynowicz,
Lucile Rutkowski,
Isak Silander,
Alexandra C. Johansson,
Vinicius Silva de Oliveira,
Ove Axner,
Grzegorz Soboń,
Tadeusz Martynkien,
Paweł Mergo,
Kevin K. Lehmann
Abstract:
We report the measurement of sub-Doppler double-resonance transitions in methane using a 3.3 $μ$m continuous wave optical parametric oscillator to pump transitions in the fundamental $ν_3$ band and a 1.67 $μ$m frequency comb to probe ladder-type transitions in the 3$ν_3$ band over 200 cm$^{-1}$ of bandwidth. We detected 36 ladder-type resonances for 9 pumped transitions with average center frequen…
▽ More
We report the measurement of sub-Doppler double-resonance transitions in methane using a 3.3 $μ$m continuous wave optical parametric oscillator to pump transitions in the fundamental $ν_3$ band and a 1.67 $μ$m frequency comb to probe ladder-type transitions in the 3$ν_3$ band over 200 cm$^{-1}$ of bandwidth. We detected 36 ladder-type resonances for 9 pumped transitions with average center frequency accuracy of 1.7 MHz, limited by the pump frequency stability. The lines are assigned using the TheoReTS line list, and the intensity ratios for different relative pump/probe polarizations. This method provides accurate assignment of highly excited energy levels that cannot be done using high temperature spectra.
△ Less
Submitted 23 January, 2020;
originally announced January 2020.
-
High-power frequency comb source tunable from 2.7 to 4.2 μm based on difference frequency generation pumped by an Yb-doped fiber laser
Authors:
Grzegorz Sobon,
Tadeusz Martynkien,
Pawel Mergo,
Lucile Rutkowski,
Aleksandra Foltynowicz
Abstract:
We demonstrate a broadband mid-infrared (MIR) frequency comb source based on difference frequency generation (DFG) in periodically poled lithium niobate (PPLN) crystal. Mid-infrared radiation is obtained via mixing of the output of a 125 MHz repetition rate Yb-doped fiber laser with Raman-shifted solitons generated from the same source in a highly nonlinear fiber. The resulting idler is tunable in…
▽ More
We demonstrate a broadband mid-infrared (MIR) frequency comb source based on difference frequency generation (DFG) in periodically poled lithium niobate (PPLN) crystal. Mid-infrared radiation is obtained via mixing of the output of a 125 MHz repetition rate Yb-doped fiber laser with Raman-shifted solitons generated from the same source in a highly nonlinear fiber. The resulting idler is tunable in the range of 2.7 - 4.2 μm with average output power reaching 237 mW, and pulses as short as 115 fs. The coherence of the MIR comb is confirmed by spectral interferometry and heterodyne beat measurements. Applicability of the developed DFG source for laser spectroscopy is demonstrated by measuring absorption spectrum of acetylene at 3.0 - 3.1 μm.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Black phosphorus a new saturable absorber material for ultrashort pulse generation
Authors:
Jaroslaw Sotor,
Grzegorz Sobon,
Wojciech Macherzynski,
Piotr Paletko,
Krzysztof M. Abramski
Abstract:
Low-dimensional materials, due to their versatile properties are very interesting for numerous electronics and optoelectronics applications. Recently rediscovered black phosphorus, with a graphite-like structure can be exfoliated up to the single atomic layer. In contrary to graphene it possesses a direct band gap controllable by the number of stacked atomic layers. For those reasons, it is now in…
▽ More
Low-dimensional materials, due to their versatile properties are very interesting for numerous electronics and optoelectronics applications. Recently rediscovered black phosphorus, with a graphite-like structure can be exfoliated up to the single atomic layer. In contrary to graphene it possesses a direct band gap controllable by the number of stacked atomic layers. For those reasons, it is now intensively investigated. Here we demonstrate, that black phosphorus can serve as a broadband saturable absorber and can be used for ultrashort optical pulse generation. The mechanically exfoliated ~300 nm thick layers of black phosphorus were transferred onto the fiber core and under pulsed excitation at 1560 nm wavelength its transmission increases by 4.4%. It was used to generate 272 fs-short pulses at 1550 nm and 739 fs at 1910 nm. The obtained results shows that black phosphorus can be effectively used for ultrashort pulse generation and proves its great potential to future applications.
△ Less
Submitted 18 April, 2015;
originally announced April 2015.
-
Linearly polarized, Q-switched Er-doped fiber laser based on reduced graphene oxide saturable absorber
Authors:
Grzegorz Sobon,
Jaroslaw Sotor,
Joanna Jagiello,
Rafal Kozinski,
Krzysztof Librant,
Mariusz Zdrojek,
Ludwika Lipinska,
Krzysztof M. Abramski
Abstract:
We demonstrate generation of linearly polarized pulses from a passively Q-switched Erbium-doped fiber laser. The cavity was designed using only polarization maintaining (PM) fibers and components, resulting in linearly polarized output beam with degree of polarization (DOP) at the level of 97.6%. Reduced graphene oxide (rGO) was used as a saturable absorber for Q-switched operation. The laser was…
▽ More
We demonstrate generation of linearly polarized pulses from a passively Q-switched Erbium-doped fiber laser. The cavity was designed using only polarization maintaining (PM) fibers and components, resulting in linearly polarized output beam with degree of polarization (DOP) at the level of 97.6%. Reduced graphene oxide (rGO) was used as a saturable absorber for Q-switched operation. The laser was capable of delivering 1.85us pulses with 125nJ pulse energy at 115kHz repetition rate.
△ Less
Submitted 2 December, 2012;
originally announced December 2012.
-
Graphene Oxide vs. Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser
Authors:
Grzegorz Sobon,
Jaroslaw Sotor,
Joanna Jagiello,
Rafal Kozinski,
Mariusz Zdrojek,
Marcin Holdynski,
Piotr Paletko,
Jakub Boguslawski,
Ludwika Lipinska,
Krzysztof M. Abramski
Abstract:
In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investig…
▽ More
In this work we demonstrate comprehensive studies on graphene oxide (GO) and reduced graphene oxide (rGO) based saturable absorbers (SA) for mode-locking of Er-doped fiber lasers. The paper describes the fabrication process of both saturable absorbers and detailed comparison of their parameters. Our results show, that there is no significant difference in the laser performance between the investigated SA. Both provided stable, mode-locked operation with sub-400 fs soliton pulses and more than 9 nm optical bandwidth at 1560 nm center wavelength. It has been shown that GO might be successfully used as an efficient SA without the need of its reduction to rGO. Taking into account simpler manufacturing technology and the possibility of mass production, GO seems to be a good candidate as a cost-effective material for saturable absorbers for Er-doped fiber lasers.
△ Less
Submitted 4 October, 2012;
originally announced October 2012.
