-
Forecasting Particle Accelerator Interruptions Using Logistic LASSO Regression
Authors:
Sichen Li,
Jochem Snuverink,
Fernando Perez-Cruz,
Andreas Adelmann
Abstract:
Unforeseen particle accelerator interruptions, also known as interlocks, lead to abrupt operational changes despite being necessary safety measures. These may result in substantial loss of beam time and perhaps even equipment damage. We propose a simple yet powerful binary classification model aiming to forecast such interruptions, in the case of the High Intensity Proton Accelerator complex at th…
▽ More
Unforeseen particle accelerator interruptions, also known as interlocks, lead to abrupt operational changes despite being necessary safety measures. These may result in substantial loss of beam time and perhaps even equipment damage. We propose a simple yet powerful binary classification model aiming to forecast such interruptions, in the case of the High Intensity Proton Accelerator complex at the Paul Scherrer Institut. The model is formulated as logistic regression penalized by least absolute shrinkage and selection operator, based on a statistical two sample test to distinguish between unstable and stable states of the accelerator.
The primary objective for receiving alarms prior to interlocks is to allow for countermeasures and reduce beam time loss. Hence, a continuous evaluation metric is developed to measure the saved beam time in any period, given the assumption that interlocks could be circumvented by reducing the beam current. The best-performing interlock-to-stable classifier can potentially increase the beam time by around 5 min in a day. Possible instrumentation for fast adjustment of the beam current is also listed and discussed.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Probing the losses for a high power beam
Authors:
M. Haj Tahar,
D. Kiselev,
A. Knecht,
D. Laube,
D. Reggiani,
J. Snuverink
Abstract:
The High Intensity Proton Accelerator (HIPA) cyclotron at the Paul Scherrer Institut (PSI) delivers 590 MeV CW proton beam with a maximum power of 1.42 MW. After extraction, the beam is transferred in a 120 m long channel towards two target stations (TgM and TgE) for surface muon production before depositing its remaining power at the spallation target SINQ for neutron production. As part of the H…
▽ More
The High Intensity Proton Accelerator (HIPA) cyclotron at the Paul Scherrer Institut (PSI) delivers 590 MeV CW proton beam with a maximum power of 1.42 MW. After extraction, the beam is transferred in a 120 m long channel towards two target stations (TgM and TgE) for surface muon production before depositing its remaining power at the spallation target SINQ for neutron production. As part of the High Intensity Muon Beamline (HIMB) feasibility study, the first of these targets will be replaced with a thicker one thereby increasing the rate of surface muon production. However, a key challenge for HIMB is to maintain the proton beam losses to the lowest possible levels which requires improving our understanding of the distributed losses along the MW-class beamline. To this end, a new approach was developed where the aim is to relate the experimental values of the temperature, beam profile measurements as well as beam current measurements to the combined power deposition calculations and primary beam losses using Monte Carlo simulation tools.
△ Less
Submitted 2 June, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
Tuning Particle Accelerators with Safety Constraints using Bayesian Optimization
Authors:
Johannes Kirschner,
Mojmir Mutný,
Andreas Krause,
Jaime Coello de Portugal,
Nicole Hiller,
Jochem Snuverink
Abstract:
Tuning machine parameters of particle accelerators is a repetitive and time-consuming task that is challenging to automate. While many off-the-shelf optimization algorithms are available, in practice their use is limited because most methods do not account for safety-critical constraints in each iteration, such as loss signals or step-size limitations. One notable exception is safe Bayesian optimi…
▽ More
Tuning machine parameters of particle accelerators is a repetitive and time-consuming task that is challenging to automate. While many off-the-shelf optimization algorithms are available, in practice their use is limited because most methods do not account for safety-critical constraints in each iteration, such as loss signals or step-size limitations. One notable exception is safe Bayesian optimization, which is a data-driven tuning approach for global optimization with noisy feedback. We propose and evaluate a step-size limited variant of safe Bayesian optimization on two research facilities of the Paul Scherrer Institut (PSI): a) the Swiss Free Electron Laser (SwissFEL) and b) the High-Intensity Proton Accelerator (HIPA). We report promising experimental results on both machines, tuning up to 16 parameters subject to 224 constraints.
△ Less
Submitted 30 June, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Beam strip** interactions in compact cyclotrons
Authors:
Pedro Calvo,
Iván Podadera,
Daniel Gavela,
Concepción Oliver,
Andreas Adelmann,
Jochem Snuverink,
Achim Gsell
Abstract:
Beam strip** losses of H- ion beams by interactions with residual gas and electromagnetic fields are evaluated. These processes play an important role in compact cyclotrons where the beam is produced on an internal ion source, and they operate under high magnetic field. The implementation of strip** interactions into the beam dynamics code OPAL provides an adequate framework to estimate the st…
▽ More
Beam strip** losses of H- ion beams by interactions with residual gas and electromagnetic fields are evaluated. These processes play an important role in compact cyclotrons where the beam is produced on an internal ion source, and they operate under high magnetic field. The implementation of strip** interactions into the beam dynamics code OPAL provides an adequate framework to estimate the strip** losses for compact cyclotrons such as AMIT. The analysis is focused on optimizing the high energy beam current delivered to the target. The optimization is performed by adjusting parameters of the ion source to regulate the vacuum level inside the accelerator and minimize the beam strip** losses.
△ Less
Submitted 24 June, 2021; v1 submitted 29 March, 2021;
originally announced March 2021.
-
A Novel Approach for Classification and Forecasting of Time Series in Particle Accelerators
Authors:
Sichen Li,
Mélissa Zacharias,
Jochem Snuverink,
Jaime Coello de Portugal,
Fernando Perez-Cruz,
Davide Reggiani,
Andreas Adelmann
Abstract:
The beam interruptions (interlocks) of particle accelerators, despite being necessary safety measures, lead to abrupt operational changes and a substantial loss of beam time. A novel time series classification approach is applied to decrease beam time loss in the High Intensity Proton Accelerator complex by forecasting interlock events. The forecasting is performed through binary classification of…
▽ More
The beam interruptions (interlocks) of particle accelerators, despite being necessary safety measures, lead to abrupt operational changes and a substantial loss of beam time. A novel time series classification approach is applied to decrease beam time loss in the High Intensity Proton Accelerator complex by forecasting interlock events. The forecasting is performed through binary classification of windows of multivariate time series. The time series are transformed into Recurrence Plots which are then classified by a Convolutional Neural Network, which not only captures the inner structure of the time series but also utilizes the advances of image classification techniques. Our best performing interlock-to-stable classifier reaches an Area under the ROC Curve value of $0.71 \pm 0.01$ compared to $0.65 \pm 0.01$ of a Random Forest model, and it can potentially reduce the beam time loss by $0.5 \pm 0.2$ seconds per interlock.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
OPAL a Versatile Tool for Charged Particle Accelerator Simulations
Authors:
Andreas Adelmann,
Pedro Calvo,
Matthias Frey,
Achim Gsell,
Uldis Locans,
Christof Metzger-Kraus,
Nicole Neveu,
Chris Rogers,
Steve Russell,
Suzanne Sheehy,
Jochem Snuverink,
Daniel Winklehner
Abstract:
Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper des…
▽ More
Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper describes OPAL (Object Oriented Parallel Accelerator Library), a parallel open source tool for charged-particle optics in linear accelerators and rings, including 3D space charge. OPAL is built from the ground up as a parallel application exemplifying the fact that high performance computing is the third leg of science, complementing theory and experiment. Using the MAD language with extensions, OPAL can run on a laptop as well as on the largest high performance computing systems. The OPAL framework makes it easy to add new features in the form of new C++ classes, enabling the modelling of many physics processes and field types. OPAL comes in two flavours: OPAL-cycl: tracks particles with 3D space charge including neighbouring turns in cyclotrons and FFAs with time as the independent variable. OPAL-t: models beam lines, linacs, rf-photo injectors and complete XFELs excluding the undulator. The code is managed through the git distributed version control system. A suite of unit tests have been developed for various parts of OPAL, validating each part of the code independently. System tests validate the overall integration of different elements.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Matching of turn pattern measurements for cyclotrons using multi-objective optimization
Authors:
Matthias Frey,
Jochem Snuverink,
Christian Baumgarten,
Andreas Adelmann
Abstract:
The usage of numerical models to study the evolution of particle beams is an essential step in the design process of particle accelerators However, uncertainties of input quantities such as beam energy and magnetic field lead to simulation results that do not fully agree with measurements, hence the final machine will behave slightly differently than the simulations In case of cyclotrons such disc…
▽ More
The usage of numerical models to study the evolution of particle beams is an essential step in the design process of particle accelerators However, uncertainties of input quantities such as beam energy and magnetic field lead to simulation results that do not fully agree with measurements, hence the final machine will behave slightly differently than the simulations In case of cyclotrons such discrepancies affect the overall turn pattern or may even alter the number of turns in the machine Inaccuracies at the PSI Ring cyclotron facility that may harm the isochronism are compensated by additional magnetic fields provided by 18 trim coils These are often absent from simulations or their implementation is very simplistic In this paper a newly developed realistic trim coil model within the particle accelerator framework OPAL is presented that was used to match the turn pattern of the PSI Ring cyclotron Due to the high-dimensional search space consisting of 48 design variables (simulation input parameters) and 182 objectives (i.e turns) simulation and measurement cannot be matched in a straightforward manner Instead, an evolutionary multi-objective optimisation with a population size of more than 8000 individuals per generation together with a local search approach were applied that reduced the maximum absolute error to 4.54 mm over all 182 turns.
△ Less
Submitted 4 June, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Opportunities in Machine Learning for Particle Accelerators
Authors:
Auralee Edelen,
Christopher Mayes,
Daniel Bowring,
Daniel Ratner,
Andreas Adelmann,
Rasmus Ischebeck,
Jochem Snuverink,
Ilya Agapov,
Raimund Kammering,
Jonathan Edelen,
Ivan Bazarov,
Gianluca Valentino,
Jorg Wenninger
Abstract:
Machine learning (ML) is a subfield of artificial intelligence. The term applies broadly to a collection of computational algorithms and techniques that train systems from raw data rather than a priori models. ML techniques are now technologically mature enough to be applied to particle accelerators, and we expect that ML will become an increasingly valuable tool to meet new demands for beam energ…
▽ More
Machine learning (ML) is a subfield of artificial intelligence. The term applies broadly to a collection of computational algorithms and techniques that train systems from raw data rather than a priori models. ML techniques are now technologically mature enough to be applied to particle accelerators, and we expect that ML will become an increasingly valuable tool to meet new demands for beam energy, brightness, and stability. The intent of this white paper is to provide a high-level introduction to problems in accelerator science and operation where incorporating ML-based approaches may provide significant benefit. We review ML techniques currently being investigated at particle accelerator facilities, and we place specific emphasis on active research efforts and promising exploratory results. We also identify new applications and discuss their feasibility, along with the required data and infrastructure strategies. We conclude with a set of guidelines and recommendations for laboratory managers and administrators, emphasizing the logistical and technological requirements for successfully adopting this technology. This white paper also serves as a summary of the discussion from a recent workshop held at SLAC on ML for particle accelerators.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
BDSIM: An Accelerator Tracking Code with Particle-Matter Interactions
Authors:
Laurence Nevay,
Jochem Snuverink,
Andrey Abramov,
Lawrence Deacon,
Hector Garcia-Morales,
Stephen Gibson,
Regina Kwee-Hinzmann,
Helena Lefebvre,
William Shields,
Stuart Walker,
Stewart Boogert
Abstract:
Beam Delivery Simulation (BDSIM) is a program that simulates the passage of particles in a particle accelerator. It uses a suite of standard high energy physics codes (Geant4, ROOT and CLHEP) to create a computational model of a particle accelerator that combines accurate accelerator tracking routines with all of the physics processes of particles in Geant4. This unique combination permits radiati…
▽ More
Beam Delivery Simulation (BDSIM) is a program that simulates the passage of particles in a particle accelerator. It uses a suite of standard high energy physics codes (Geant4, ROOT and CLHEP) to create a computational model of a particle accelerator that combines accurate accelerator tracking routines with all of the physics processes of particles in Geant4. This unique combination permits radiation and detector background simulations in accelerators where both accurate tracking of all particles is required over long range or over many revolutions of a circular machine, as well as interaction with the material of the accelerator.
△ Less
Submitted 5 February, 2020; v1 submitted 31 August, 2018;
originally announced August 2018.
-
On the accuracy of Monte Carlo based beam dynamics models for the degrader in proton therapy facilities
Authors:
V. Rizzoglio,
A. Adelmann,
C. Baumgarten,
D. Meer,
J. Snuverink,
V. Talanov
Abstract:
In a cyclotron-based proton therapy facility, the energy changes are performed by means of a degrader of variable thickness. The interaction of the proton beam with the degrader creates energy tails and increases the beam emittance. A precise model of the degraded beam properties is important not only to better understand the performance of a facility already in operation, but also to support the…
▽ More
In a cyclotron-based proton therapy facility, the energy changes are performed by means of a degrader of variable thickness. The interaction of the proton beam with the degrader creates energy tails and increases the beam emittance. A precise model of the degraded beam properties is important not only to better understand the performance of a facility already in operation, but also to support the development of new proton therapy concepts. The exact knowledge of the degraded beam properties, in terms of energy spectrum and transverse phase space, depends on the model used to describe the proton interaction with the degrader material. In this work the model of a graphite degrader has been developed with four Monte Carlo codes: three conventional Monte Carlo codes (FLUKA, GEANT4 and MCNPX) and the multi-purpose particle tracking code OPAL equipped with a simplified Monte Carlo routine. From the comparison between the different codes, we can deduce how the accuracy of the degrader model influences the precision of the beam dynamics model of a possible transport line downstream of the degrader.
△ Less
Submitted 20 February, 2018; v1 submitted 1 December, 2017;
originally announced December 2017.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
BDS tuning and Luminosity Monitoring in CLIC
Authors:
B. Dalena,
J. Barranco,
A. Latina,
E. Marin,
J. Pfingstner,
D. Schulte,
J. Snuverink,
R. Tomas,
G. Zamudio
Abstract:
The emittance preservation in the Beam Delivery System (BDS) is one of the major challenges in CLIC. The fast detuning of the final focus optics requires an on-line tuning procedure in order to keep luminosity close to the maximum. Different tuning techniques have been applied to the CLIC BDS and in particular to the Final Focus System (FFS) in order to mitigate static and dynamic imperfections. S…
▽ More
The emittance preservation in the Beam Delivery System (BDS) is one of the major challenges in CLIC. The fast detuning of the final focus optics requires an on-line tuning procedure in order to keep luminosity close to the maximum. Different tuning techniques have been applied to the CLIC BDS and in particular to the Final Focus System (FFS) in order to mitigate static and dynamic imperfections. Some of them require a fast luminosity measurement. Here we study the possibility to use beam-beam backgrounds processes at CLIC 3 TeV CM energy as fast luminosity signal. In particular the hadrons multiplicity in the detector region is investigated.
△ Less
Submitted 2 February, 2012;
originally announced February 2012.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.