Showing 1–50 of 88 results for author: Smith, D R

Equivalence of Polarizability and Circuit Models for Waveguide-Fed Metamaterial Elements

Authors: David R. Smith, Mohsen Sazegar, Insang Yoo

Abstract: A common variant of a metasurface antenna consists of an array of metamaterial elements coupled to a waveguide feed. The guided wave excites the metamaterial elements, coupling energy from the waveguide mode to radiation. Under appropriate conditions, each sub-wavelength metamaterial element can be modeled as a polarizable dipole, with the polarizability determined by an extraction procedure from… ▽ More A common variant of a metasurface antenna consists of an array of metamaterial elements coupled to a waveguide feed. The guided wave excites the metamaterial elements, coupling energy from the waveguide mode to radiation. Under appropriate conditions, each sub-wavelength metamaterial element can be modeled as a polarizable dipole, with the polarizability determined by an extraction procedure from the computed or measured waveguide scattering parameters. Here we establish the equivalence of this polarizability description of a metamaterial element with an equivalent circuit model, providing an additional tool for metasurface design that offers significant insight and a path towards efficiently modeling very large apertures. With this equivalence established, more complicated external circuits that include lumped elements and devices such as diodes and transistors can be integrated into the metamaterial element, which can then be transformed into an equivalent polarizability for modeling in the coupled dipole framework. We derive appropriate circuit models for several basic metamaterial elements, which provide direct relationships between the equivalent circuit parameters of an element and its effective polarizability. These expressions are confirmed using scattering parameters for several example structures obtained via full-wave simulations. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Low frequency coherent Raman imaging robust to optical scattering

Authors: David R. Smith, Jesse W. Wilson, Siddarth Shivkumar, Herve Rigneault, Randy A. Bartels

Abstract: We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational spectra. Recording of ISRS spectra requires isolation of a probe pulse from the pump pulse. While this separation is simple in non-scattering specimens, such a… ▽ More We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational spectra. Recording of ISRS spectra requires isolation of a probe pulse from the pump pulse. While this separation is simple in non-scattering specimens, such as liquids, scattering leads to significant pump pulse contamination and prevent the extraction of a Raman spectrum. We introduce a robust method for ISRS microscopy that works in complex scattering samples. High signal-to-noise ISRS spectra are obtained even when the pump and probe pulses pass through many scattering layers. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Comments: 13 pages; 5 figures

(Re)Defining Expertise in Machine Learning Development

Authors: Mark Díaz, Angela D. R. Smith

Abstract: Domain experts are often engaged in the development of machine learning systems in a variety of ways, such as in data collection and evaluation of system performance. At the same time, who counts as an 'expert' and what constitutes 'expertise' is not always explicitly defined. In this project, we conduct a systematic literature review of machine learning research to understand 1) the bases on whic… ▽ More Domain experts are often engaged in the development of machine learning systems in a variety of ways, such as in data collection and evaluation of system performance. At the same time, who counts as an 'expert' and what constitutes 'expertise' is not always explicitly defined. In this project, we conduct a systematic literature review of machine learning research to understand 1) the bases on which expertise is defined and recognized and 2) the roles experts play in ML development. Our goal is to produce a high-level taxonomy to highlight limits and opportunities in how experts are identified and engaged in ML research. △ Less

Submitted 8 February, 2023; originally announced February 2023.

Comments: NeurIPS 2022 Workshop on Data-Centric AI, 2 pages

Simultaneous Transmitting and Reflecting (STAR)-RIS for Harmonious Millimeter Wave Spectrum Sharing

Authors: Omar Hashash, Walid Saad, Mohammadreza F. Imani, David R. Smith

Abstract: The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challeng… ▽ More The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spectrum sharing demands. In this paper, a novel simultaneous transmitting and reflecting RIS (STAR-RIS)-aided solution to enable mmWave spectrum sharing is proposed. In particular, the transmitting and reflecting abilities of the STAR-RIS are leveraged to tackle the mmWave spectrum sharing and QoS requirements separately. The STAR-RIS-enabled spectrum sharing problem between a primary network (e.g. a radar transmit-receive pair) and a secondary network is formulated as an optimization problem whose goal is to maximize the downlink sum-rate over a secondary multiple-input-single-output (MISO) network, while limiting interference over a primary network. Moreover, the STAR-RIS response coefficients and beamforming matrix in the secondary network are jointly optimized. To solve this non-convex problem, an alternating iterative algorithm is employed, where the STAR-RIS response coefficients and beamforming matrix are obtained using the successive convex approximation method. Simulation results show that the proposed solution outperforms conventional RIS schemes for mmWave spectrum sharing by achieving a 14.57% spectral efficiency gain. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Automatic Identification of Edge Localized Modes in the DIII-D Tokamak

Authors: Finn H. O'Shea, Semin Joung, David R. Smith, Ryan Coffee

Abstract: Fusion power production in tokamaks uses discharge configurations that risk producing strong Type I Edge Localized Modes. The largest of these modes will likely increase impurities in the plasma and potentially damage plasma facing components such as the protective heat and waste divertor. Machine learning-based prediction and control may provide for online mitigation of these damaging modes befor… ▽ More Fusion power production in tokamaks uses discharge configurations that risk producing strong Type I Edge Localized Modes. The largest of these modes will likely increase impurities in the plasma and potentially damage plasma facing components such as the protective heat and waste divertor. Machine learning-based prediction and control may provide for online mitigation of these damaging modes before they grow too large to suppress. To that end, large labeled datasets are required for supervised training of machine learning models. We present an algorithm that achieves 97.7% precision when automatically labeling Edge Localized Modes in the large DIII-D tokamak discharge database. The algorithm has no user controlled parameters and is largely robust to tokamak and plasma configuration changes. This automatically-labeled database of events can subsequently feed future training of machine learning models aimed at autonomous Edge Localized Mode control and suppression. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Comments: 7 pages, 6 figures

Hollow Rectangular Waveguide-fed Holographic Beamforming Antenna Additively Manufactured (3D Printed) with Conductive Polymer

Authors: Insang Yoo, Jonah Gollub, Shengrong Ye, Allen Gray, Okan Yurduseven, Manohar D. Deshpande, David R. Smith

Abstract: We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verificatio… ▽ More We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verification, the designed antennas are fabricated using a desktop dual-extrusion fused filament 3D printer. The body of each antenna and its inner conducting surface are respectively printed using polylactic acid and biodegradable conductive polyester composite material (i.e., Electrifi), which is later deposited with a layer of copper on its surface to improve surface conductivity and reduce surface roughness. The beamforming performance of the fabricated antennas is confirmed via experiments. The 3D printed metasurface antennas using the proposed fabrication technique illustrate emerging capabilities in the rapid prototy** of complex electromagnetic structures. △ Less

Submitted 30 August, 2022; originally announced August 2022.

An Integrated, Phase-Controlled Power Divider for Metasurface Array Antennas

Authors: Deepayan Banerjee, Aaron V. Diebold, David R. Smith, Michael Boyarsky

Abstract: We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch wav… ▽ More We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch waveguide with equal power. Further, the power divider must also apply a prescribed phase shift to each branch waveguide to mitigate metasurface-specific grating lobes. The presented design features hollow metal waveguides, with a conducting sheet patterned with metamaterial irises serving as the upper wall. A single hollow metal main waveguide feed is used to couple power to each of the branch waveguide. Carefully oriented slots control both the magnitude and phase of the field distributed from the main feed to each branch. All waveguides can be machined from a single block of metal, with a metamaterial-patterned printed circuit board laminated to the top of the assembly. The resulting design is mechanically robust and capable of high power operation while retaining the low-cost, low-power consumption, lightweight, and low-profile features common in metasurface antenna designs. △ Less

Submitted 11 July, 2022; originally announced August 2022.

Reflectarray Design Using a Discrete Dipole Framework

Authors: Aaron V. Diebold, Divya Pande, Christine Gregg, David R. Smith

Abstract: We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configuratio… ▽ More We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configurations. This dipole framework serves as an alternative to the ray tracing model often used in reflectarray designs, in which rays are drawn from the feed point and scattered off of the patch elements. Whereas the ray tracing method solves the design problem in terms of phase delays, the dipole framework presented here has the potential to accurately design and predict beam patterns using a fully dipolar treatment of empirically characterized patches. We illustrate this technique by applying it to two modulation strategies: a variable patch size reflectarray in which the phase can be continuously tuned (grayscale patch response), and a fixed patch size (binary patch response) in which on/off modulation is achieved through selective patch electrical shorting. Methods for incorporating these cases into the dipole design framework are discussed and the results compared to those from full wave simulation. △ Less

Submitted 29 November, 2022; v1 submitted 31 May, 2022; originally announced June 2022.

Comments: 10 pages, 10 figures

Optimizing Polarizability Distributions for Metasurface Apertures with Lorentzian-Constrained Radiators

Authors: Patrick T. Bowen, Michael Boyarsky, Laura M. Pulido-Mancera, David R. Smith, Okan Yurduseven, Mohsen Sazegar

Abstract: We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach t… ▽ More We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each element would need to have unconstrained magnitude and phase; however, for a single, passive, metamaterial resonator the magnitude and phase of the effective polarizability are inextricably linked through the properties of the Lorentzian resonance, with the range of phase values restricted to a span of at most 180 degrees. Here, we introduce a family of map**s from the ideal to the available polarizability distributions, easily visualized by plotting both polarizabilities in the complex plane. Using one of these map**s it is possible to achieve highly optimized beam patterns from a metasurface antenna, despite the inherent resonator limitations. We introduce the map** technique and provide several specific examples, with numerical simulations used to confirm the design approach. △ Less

Submitted 1 May, 2022; originally announced May 2022.

Comments: 14 pages, 14 figures. To be submitted to Physical Review Applied

Nanogap-Enhanced Infrared Spectroscopy with Template-Stripped Wafer-Scale Arrays of Buried Plasmonic Cavities

Authors: Xiaoshu Chen, Cristian Ciracì, David R. Smith, Sang-Hyun Oh

Abstract: We have combined atomic layer lithography and template strip** to produce a new class of substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. Our structure consists of a buried and U-shaped metal-insulator-metal waveguide whose folded vertical arms efficiently couple normally incident light. The insulator is formed by atomic layer deposition (ALD) of Al2O3 and precisely defi… ▽ More We have combined atomic layer lithography and template strip** to produce a new class of substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. Our structure consists of a buried and U-shaped metal-insulator-metal waveguide whose folded vertical arms efficiently couple normally incident light. The insulator is formed by atomic layer deposition (ALD) of Al2O3 and precisely defines the gap size. The buried nanocavities are protected from contamination by a silicon template until ready for use and exposed by template strip** on demand. The exposed nanocavity generates strong infrared resonances, tightly confines infrared radiation into a gap that is as small as 3 nm (λ/3300), and creates a dense array of millimeter-long hotspots. After partial removal of the insulators, the gaps are backfilled with benzenethiol molecules, generating distinct Fano resonances due to strong coupling with gap plasmons, and a SEIRA enhancement factor of 10^5 is observed for a 3 nm gap. Because of the wafer-scale manufacturability, single-digit-nanometer control of the gap size via ALD, and long-term storage enabled by template strip**, our buried plasmonic nanocavity substrates will benefit broad applications in sensing and spectroscopy. △ Less

Submitted 16 April, 2022; originally announced April 2022.

Journal ref: Nano Letters 15 (2015) 107-113

Design of Conformal Array of Rectangular Waveguide-fed Metasurfaces

Authors: Insang Yoo, David R. Smith

Abstract: We present a systematic design method for a cylindrical conformal array of rectangular waveguide-fed metasurfaces. The conformal metasurface consists of multiple curved rectangular waveguides loaded with metamaterial elements\textemdash electrically small irises\textemdash inserted into the upper conducting walls of the waveguides. Each element radiates energy into free space to contribute to an o… ▽ More We present a systematic design method for a cylindrical conformal array of rectangular waveguide-fed metasurfaces. The conformal metasurface consists of multiple curved rectangular waveguides loaded with metamaterial elements\textemdash electrically small irises\textemdash inserted into the upper conducting walls of the waveguides. Each element radiates energy into free space to contribute to an overall radiation pattern. Thus, the geometry or electrical configuration of each of the individual metamaterial elements needs to be tailored to generate a desired pattern. In general, due to difficulties in modeling the effect of curvature, the design of conformal metasurface arrays has relied on full-wave simulations or experiments. In this study, we propose a design method utilizing the analytic model of a planar metasurface accounting for metamaterial elements' locations and orientations over a surface with curvature. Although approximate, we demonstrate that such an alteration along with the framework of dipolar modeling of planar elements can be used for the analysis of conformal arrays with small curvature. We then design a conformal array metasurface using the method combined with CMA-ES optimizer. Through numerical simulations, we confirm the validity of the proposed design method. Applications include the design of metasurfaces for radar, communications, and imaging systems for automobiles and airplanes. △ Less

Submitted 27 August, 2021; originally announced September 2021.

Holographic Metasurface Antennas for Uplink Massive MIMO Systems

Authors: Insang Yoo, David R. Smith

Abstract: We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a h… ▽ More We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a holographic solution for the guided (or reference) mode, generating a fan beam towards a prescribed direction, thereby forming a multibeam antenna system. We demonstrate that a narrowband uplink massive MIMO system using the metasurfaces can achieve the sum capacity close to that offered by the Rayleigh channel at 3.5 GHz. We show that metasurfaces supporting multiple fan beams can achieve high spatial resolution in the azimuth directions in sub-6 GHz channels, and thereby form uncorrelated MIMO channels between the base station and users. Also, the proposed metasurface antenna is structurally simple, low-cost, and efficient, and thus is suitable to alleviate RF hardware issues common to massive MIMO systems equipped with a large antenna system. △ Less

Submitted 27 August, 2021; originally announced August 2021.

Meta-Programmable Analog Differentiator

Authors: Jérôme Sol, David R. Smith, Philipp del Hougne

Abstract: We show experimentally that the fundamental ingredient of wave-based signal differentiation, namely zeros of the scattering matrix that lie exactly on the real axis, can be imposed at will and in situ by purposefully perturbing an overmoded random scattering system. The resulting unprecedented flexibility overcomes current limitations of wave-based differentiators, both regarding their extreme vul… ▽ More We show experimentally that the fundamental ingredient of wave-based signal differentiation, namely zeros of the scattering matrix that lie exactly on the real axis, can be imposed at will and in situ by purposefully perturbing an overmoded random scattering system. The resulting unprecedented flexibility overcomes current limitations of wave-based differentiators, both regarding their extreme vulnerability due to fabrication inaccuracies or environmental perturbations as well as their lack of in situ adaptability. Moreover, in addition to current miniaturization efforts, we suggest that integrability of wave processors can also be achieved by endowing existing bulky everyday-life systems that naturally scatter waves with a second signal-processing functionality. We demonstrate our technique by placing a programmable metasurface inside a 3D disordered metallic box: the hundreds of available degrees of freedom allow us to impose at will reflection zeros on a connected port, such that the reflected signal envelope is the temporal derivative of the incident one. We demonstrate our ability to toggle between differentiation of envelopes modulated onto distinct carriers. We also parallelize multiple differentiation operations on the same device and implement higher-order differentiators. Our "over-the-air" temporal differentiator for microwave carriers may find civilian and military applications in processing wireless communication or radar signals, for data segmentation and compression, as well as machine vision and hearing. Our generic concept is also applicable to optical, acoustic, and elastic scattering. △ Less

Submitted 11 December, 2021; v1 submitted 13 August, 2021; originally announced August 2021.

Comments: 29 pages including 4 figures + 27 pages Supplementary Materials

Journal ref: Nat. Commun. 13, 1713 (2022)

Perturbative Determination of Plasma Microinstabilities in Tokamaks

Authors: A. O. Nelson, F. M. Laggner, A. Diallo, Z. A. Xing, D. R. Smith, E. Kolemen

Abstract: Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to comp… ▽ More Recently, theoretical analysis has identified plasma microinstabilities as the primary mechanism responsible for anomalous heat transport in tokamaks. In particular, the microtearing mode (MTM) has been credited with the production of intense electron heat fluxes, most notably through a thin self-organized boundary layer called the pedestal. Here we exploit a novel, time-dependent analysis to compile explicit experimental evidence that MTMs are active in the pedestal region. The expected frequency of pedestal MTMs, calculated as a function of time from plasma profile measurements, is shown in a dedicated experiment to be in excellent agreement with observed magnetic turbulence fluctuations. Further, fast perturbations of the plasma equilibrium are introduced to decouple the instability drive and resonant location, providing a compelling validation of the analytical model. This analysis offers strong evidence of edge MTMs, validating the existing theoretical work and highlighting the important role of MTMs in regulating electron heat flow in tokamaks. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 8 pages, 5 figures

Electronically Steered Nyquist Metasurface Antenna

Authors: Michael Boyarsky, Timothy Sleasman, Mohammadreza F. Imani, Jonah N. Gollub, David R. Smith

Abstract: Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight cir… ▽ More Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight circuit board with varactor-tuned elements. Distinct from previous metasurfaces (which require dense element spacing), the proposed design uses Nyquist spatial sampling of half a wavelength. We detail the design of this Nyquist metasurface antenna and experimentally validate its ability to electronically steer in two directions. Nyquist metasurface antennas can realize high performance without costly and power hungry phase shifters, making them a compelling technology for future antenna hardware. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Dynamic Metasurface Antennas for 6G Extreme Massive MIMO Communications

Authors: Nir Shlezinger, George C. Alexandropoulos, Mohammadreza F. Imani, Yonina C. Eldar, David R. Smith

Abstract: Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in t… ▽ More Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in sha** the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their effect on the ability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers. △ Less

Submitted 16 June, 2020; v1 submitted 14 June, 2020; originally announced June 2020.

Effect of magnetic perturbations on turbulence-flow dynamics at the L-H transition on DIII-D

Authors: D. M. Kriete, G. R. McKee, L. Schmitz, D. R. Smith, Z. Yan, L. A. Morton, R. J. Fonck

Abstract: Detailed 2D turbulence measurements from the DIII-D tokamak provide an explanation for how resonant magnetic perturbations (RMPs) raise the L-H power threshold $P_\textrm{LH}$ [P. Gohil et al., Nucl. Fusion 51, 103020 (2011)] in ITER-relevant, low rotation, ITER-similar-shape plasmas with favorable ion $\nabla B$ direction. RMPs simultaneously raise the turbulence decorrelation rate $Δω_D$ and red… ▽ More Detailed 2D turbulence measurements from the DIII-D tokamak provide an explanation for how resonant magnetic perturbations (RMPs) raise the L-H power threshold $P_\textrm{LH}$ [P. Gohil et al., Nucl. Fusion 51, 103020 (2011)] in ITER-relevant, low rotation, ITER-similar-shape plasmas with favorable ion $\nabla B$ direction. RMPs simultaneously raise the turbulence decorrelation rate $Δω_D$ and reduce the flow shear rate $ω_\textrm{shear}$ in the stationary L-mode state preceding the L-H transition, thereby disrupting the turbulence shear suppression mechanism. RMPs also reduce the Reynolds stress drive for poloidal flow, contributing to the reduction of $ω_\textrm{shear}$ On the ~100 μs timescale of the L-H transition, RMPs reduce Reynolds-stress-driven energy transfer from turbulence to flows by an order of magnitude, challenging the energy depletion theory for the L-H trigger mechanism. In contrast, non-resonant magnetic perturbations, which do not significantly affect $P_\textrm{LH}$, do not affect $Δω_D$ and only slightly reduce $ω_\textrm{shear}$ and Reynolds-stress-driven energy transfer. △ Less

Submitted 24 April, 2020; originally announced April 2020.

Comments: The following article has been submitted to Physics of Plasmas

Perfect Absorption in a Metasurface-Programmable Complex Scattering Enclosure

Authors: Mohammadreza F. Imani, David R. Smith, Philipp del Hougne

Abstract: Achieving the very special condition of perfect absorption (PA) in a complex scattering enclosure promises to enable a wealth of applications in secure communication, precision sensing, wireless power transfer, analog signal processing and random lasing. Consequently, a lot of recent research effort was dedicated to proposing wave-front sha** protocols to implement coherent PA in a complex scatt… ▽ More Achieving the very special condition of perfect absorption (PA) in a complex scattering enclosure promises to enable a wealth of applications in secure communication, precision sensing, wireless power transfer, analog signal processing and random lasing. Consequently, a lot of recent research effort was dedicated to proposing wave-front sha** protocols to implement coherent PA in a complex scattering environment. Here, instead of sha** the im**ing wave front and tuning the system's attenuation, we propose the conceptually different route of solely tweaking the randomness of the complex scattering environment in order to achieve PA. We provide an experimental proof-of-concept in the microwave domain where we tune the randomness of a three-dimensional chaotic cavity with a programmable metasurface. We systematically investigate the achievability and extreme sensitivity of the PA condition. Our technique can impose a PA condition at over hundred distinct frequencies within a small frequency band, which allows us to propose and experimentally demonstrate a concrete practical application: receiver-powered secure wireless communication in a complex scattering enclosure. Our fundamentally new perspective on PA is applicable to all types of wave phenomena and our results foreshadow the large potential of this novel tool for minute wave control in sensing, communication and energy transfer. △ Less

Submitted 11 June, 2020; v1 submitted 29 February, 2020; originally announced March 2020.

Comments: Original version of the manuscript submitted for peer review; 21 pages, 3 figures; Supplementary Information with 18 pages is included at the end of the file; source files in Word format have been converted to PDF

Journal ref: Adv. Funct. Mater. 30, 2005310 (2020)

Far-field Excitation of Single Graphene Plasmon Cavities with Ultra-compressed Mode-volumes

Authors: Itai Epstein, David Alcaraz, Zhiqin Huang, Varun-Varma Pusapati, Jean-Paul Hugonin, Avinash Kumar, Xander Deputy, Tymofiy Khodkov, Tatiana G. Rappoport, Nuno M. R. Peres, David R. Smith, Frank H. L. Koppens

Abstract: Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been rest… ▽ More Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been restricted to micron-scale areas, reducing their confinement potential by several orders-of-magnitude. Here, by utilizing a new type of graphene-based magnetic-resonance, we realize single, nanometric-scale AGP cavities, reaching record-breaking mode-volume confinement factors of $\thicksim5\cdot10^{-10}$. This AGP cavity acts as a mid-infrared nanoantenna, which is efficiently excited from the far-field, and electrically tuneble over an ultra-broadband spectrum. Our approach provides a new platform for studying ultra-strong-coupling phenomena, such as chemical manipulation via vibrational-strong-coupling, and a path to efficient detectors and sensors, in this challenging spectral range. △ Less

Submitted 11 February, 2020; v1 submitted 2 February, 2020; originally announced February 2020.

Journal ref: Science 368, 1219-1223 (2020)

Impact of surface roughness in nanogap plasmonic systems

Authors: Cristian Ciracì, Ferran Vidal-Codina, Daehan Yoo, Jaime Peraire, Sang-Hyun Oh, David R. Smith

Abstract: Recent results have shown unprecedented control over separation distances between two metallic elements hundreds of nanometers in size, underlying the effects of free-electron nonlocal response also at mid-infrared wavelengths. Most of metallic systems however, still suffer from some degree of inhomogeneity due to fabrication-induced surface roughness. Nanoscale roughness in such systems might hin… ▽ More Recent results have shown unprecedented control over separation distances between two metallic elements hundreds of nanometers in size, underlying the effects of free-electron nonlocal response also at mid-infrared wavelengths. Most of metallic systems however, still suffer from some degree of inhomogeneity due to fabrication-induced surface roughness. Nanoscale roughness in such systems might hinder the understanding of the role of microscopic interactions. Here we investigate the effect of surface roughness in coaxial nanoapertures resonating at mid-infrared frequencies. We show that although random roughness shifts the resonances in an unpredictable way, the impact of nonlocal effects can still be clearly observed. Roughness-induced perturbation on the peak resonance of the system shows a strong correlation with the effective gap size of the individual samples. Fluctuations due to fabrication imperfections then can be suppressed by performing measurements on structure ensembles in which averaging over a large number of samples provides a precise measure of the ideal system's optical properties. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Journal ref: ACS Photonics 7, 908 (2020)

Dynamic Metasurface Antennas for MIMO-OFDM Receivers with Bit-Limited ADCs

Authors: Hanqing Wang, Nir Shlezinger, Yonina C. Eldar, Shi **, Mohammadreza F. Imani, Insang Yoo, David R. Smith

Abstract: The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in… ▽ More The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implement controllable compression in acquisition. In this work we study the application of DMAs for MIMO-OFDM receivers operating with bit-constrained analog-to-digital converters (ADCs). We present a model for DMAs which accounts for the configurable frequency selective profile of its metamaterial elements, resulting in a spectrally flexible hybrid structure. We then exploit previous results in task-based quantization to show how DMAs can be configured to improve recovery in the presence of constrained ADCs, and propose methods for adjusting the DMA parameters based on channel state information. Our numerical results demonstrate that the DMA-based receiver is capable of accurately recovering OFDM signals. In particular, we show that by properly exploiting the spectral diversity of DMAs, notable performance gains are obtained over existing designs of conventional hybrid architectures, demonstrating the potential of DMAs for MIMO-OFDM setups in realizing high performance massive antenna arrays of reduced cost and power consumption. △ Less

Submitted 14 December, 2019; originally announced December 2019.

Ultrasensitive Doppler Raman spectroscopy using radio frequency phase shift detection

Authors: David R. Smith, Jeffrey J. Field, David G. Winters, Scott Domingue, Frauke Rininsland, Daniel J. Kane, Jesse W. Wilson, Randy A. Bartels

Abstract: We introduce the first method to enable an optical amplification of a coherent Raman spectroscopy signal called radio frequency Doppler Raman spectroscopy. Doppler Raman measurements amplify the optical signals in coherent Raman spectroscopy by converting a spectral frequency shift imparted by an impulsive coherent Raman excitation to a change in a probe pulse transit time. This transit time pertu… ▽ More We introduce the first method to enable an optical amplification of a coherent Raman spectroscopy signal called radio frequency Doppler Raman spectroscopy. Doppler Raman measurements amplify the optical signals in coherent Raman spectroscopy by converting a spectral frequency shift imparted by an impulsive coherent Raman excitation to a change in a probe pulse transit time. This transit time perturbation is detected through the phase of a radio frequency electronic signal measured at a harmonic of the probe pulse train. By exploiting this new capability to scale the signal of a coherent Raman spectroscopic signal, we open the potential to detect very weak Raman spectroscopy signals that are currently not observable due to limits of illumination intensity imposed by laser damage to the specimen. △ Less

Submitted 9 December, 2019; originally announced December 2019.

Implementation and Characterization of a Two-Dimensional Printed Circuit Dynamic Metasurface Aperture for Computational Microwave Imaging

Authors: Timothy Sleasman, Mohammadreza F. Imani, Aaron V. Diebold, Michael Boyarsky, Kenneth P. Trofatter, David R. Smith

Abstract: We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circui… ▽ More We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circuit board process. The design considerations for the metamaterial element as a tunable radiator, the associated biasing circuitry, as well as cavity parameters are examined and discussed. A sensing matrix can be constructed from the measured transmit patterns, the singular value spectrum of which provides insight into the information capacity of the apertures. We investigate the singular value spectra of the sensing matrix over a variety of operating parameters, such as the number of metamaterial elements, number of masks, and number of radiating elements. After optimizing over these key parameters, we demonstrate computational microwave imaging of simple test objects. △ Less

Submitted 20 October, 2019; originally announced November 2019.

Artificial Neural Network with Physical Dynamic Metasurface Layer for Optimal Sensing

Authors: Philipp del Hougne, Mohammadreza F. Imani, Aaron V. Diebold, Roarke Horstmeyer, David R. Smith

Abstract: We address the fundamental question of how to optimally probe a scene with electromagnetic (EM) radiation to yield a maximum amount of information relevant to a particular task. Machine learning (ML) techniques have emerged as powerful tools to extract task-relevant information from a wide variety of EM measurements, ranging from optics to the microwave domain. However, given the ability to active… ▽ More We address the fundamental question of how to optimally probe a scene with electromagnetic (EM) radiation to yield a maximum amount of information relevant to a particular task. Machine learning (ML) techniques have emerged as powerful tools to extract task-relevant information from a wide variety of EM measurements, ranging from optics to the microwave domain. However, given the ability to actively illuminate a particular scene with a programmable EM wavefront, it is often not clear what wavefronts optimally encode information for the task at hand (e.g., object detection, classification). Here, we show that by integrating a physical model of scene illumination and detection into a ML pipeline, we can jointly learn optimal sampling and measurement processing strategies for a given task. We consider in simulation the example of classifying objects using microwave radiation produced by dynamic metasurfaces. By integrating an analytical forward model describing the metamaterial elements as coupled dipoles into the ML pipeline, we jointly train analog model weights with digital neural network weights. The learned non-intuitive illumination settings yield a higher classification accuracy using fewer measurements. On the practical level, these results are highly relevant to emerging context-aware systems such as autonomous vehicles, touchless human-interactive devices or within smart health care, where strict time constraints place severe limits on measurement strategies. On the conceptual level, our work serves as a bridge between wavefront sha** and tunable metasurface design on the physical layer and ML techniques on the processing layer. △ Less

Submitted 24 June, 2019; originally announced June 2019.

Comments: 14 pages including 5 figures + 6 pages Supplemental Material

Journal ref: Adv. Sci. 1901913 (2019)

Grating Lobe Suppression in Metasurface Antenna Arrays with a Waveguide Feed Layer

Authors: Michael Boyarsky, Mohammadreza F. Imani, David R. Smith

Abstract: Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained wit… ▽ More Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained with phase shifters, they can be engineered to provide a similar level of performance with much lower power requirements and circuit complexity. Due to the limited phase and magnitude control, however, larger metasurface apertures can be susceptible to strong grating lobes which result from an unwanted periodic magnitude response that accompanies an ideal phase pattern. In this work, we combine antenna theory with analytical modeling of metamaterial elements to mathematically reveal the source of such grating lobes. To circumvent this problem, we introduce a compensatory waveguide feed layer designed to suppress grating lobes in metasurface antennas. The waveguide feed layer helps metasurface antennas approach the performance of phased arrays from an improved hardware platform, poising metasurface antennas to impact a variety of beamforming applications. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Dynamic Metasurface Antennas for Uplink Massive MIMO Systems

Authors: Nir Shlezinger, Or Dicker, Yonina C. Eldar, Insang Yoo, Mohammadreza F. Imani, David R. Smith

Abstract: Massive multiple-input multiple-output (MIMO) communications are the focus of considerable interest in recent years. While the theoretical gains of massive MIMO have been established, implementing MIMO systems with large-scale antenna arrays in practice is challenging. Among the practical challenges associated with massive MIMO systems are increased cost, power consumption, and physical size. In t… ▽ More Massive multiple-input multiple-output (MIMO) communications are the focus of considerable interest in recent years. While the theoretical gains of massive MIMO have been established, implementing MIMO systems with large-scale antenna arrays in practice is challenging. Among the practical challenges associated with massive MIMO systems are increased cost, power consumption, and physical size. In this work we study the implementation of massive MIMO antenna arrays using dynamic metasurface antennas (DMAs), an emerging technology which inherently handles the aforementioned challenges. Specifically, DMAs realize large-scale planar antenna arrays, and can adaptively incorporate signal processing methods such as compression and analog combining in the physical antenna structure, thus reducing the cost and power consumption. We first propose a mathematical model for massive MIMO systems with DMAs and discuss their constraints compared to ideal antenna arrays. Then, we characterize the fundamental limits of uplink communications with the resulting systems, and propose two algorithms for designing practical DMAs for approaching these limits. Our numerical results indicate that the proposed approaches result in practical massive MIMO systems whose performance is comparable to that achievable with ideal antenna arrays. △ Less

Submitted 30 June, 2019; v1 submitted 5 January, 2019; originally announced January 2019.

Analytical Modeling of a Two-Dimensional Waveguide-Fed Metasurface

Authors: Laura Pulido-Mancera, Mohammadreza F. Imani, Patrick T. Bowen, Nathan Kundtz, David R. Smith

Abstract: We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating elemen… ▽ More We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating element as a polarizable dipole, and account for mutual interactions among elements via guided and radiated fields by applying a coupled dipole framework. Using full-wave simulations of parallel-plate waveguides with two types of metamaterial elements, we confirm the validity of the proposed coupled dipole model and demonstrate the ability to predict radiation patterns corresponding to arbitrarily arranged elements. We explore the importance of including the mutual coupling among metamaterial elements to arrive at accurate field predictions. The coupled dipole modeling framework presented is scalable to extremely large apertures and can form the foundation for a general, efficient, yet simple aperture analysis and synthesis tool. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Comments: 14 pages, 12 figures

3D Conductive Polymer Printed Metasurface Antenna for Fresnel Focusing

Authors: Okan Yurduseven, Shengrong Ye, Thomas Fromenteze, Daniel L. Marks, Benjamin J. Wiley, David R. Smith

Abstract: We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable conductive polymer material (Electrifi) to print the conductive parts and polylactic acid (PLA) to print the dielectric substrate. The entire metasurface antenna is 3D… ▽ More We demonstrate a 3D printed holographic metasurface antenna for beam-focusing applications at 10 GHz within the X-band frequency regime. The metasurface antenna is printed using a dual-material 3D printer leveraging a biodegradable conductive polymer material (Electrifi) to print the conductive parts and polylactic acid (PLA) to print the dielectric substrate. The entire metasurface antenna is 3D printed at once; no additional techniques, such as metal-plating and laser etching, are required. It is demonstrated that using the 3D printed conductive polymer metasurface antenna, high-fidelity beam focusing can be achieved within the Fresnel region of the antenna. It is also shown that the material conductivity for 3D printing has a substantial effect on the radiation characteristics of the metasurface antenna. △ Less

Submitted 1 June, 2018; originally announced June 2018.

Analysis of a Waveguide-Fed Metasurface Antenna

Authors: David R. Smith, Okan Yurduseven, Laura Pulido Mancera, Patrick Bowen, Nathan B. Kundtz

Abstract: The metasurface concept has emerged as an advantageous reconfigurable antenna architecture for beam forming and wavefront sha**, with applications that include satellite and terrestrial communications, radar, imaging, and wireless power transfer. The metasurface antenna consists of an array of metamaterial elements distributed over an electrically large structure, each subwavelength in dimension… ▽ More The metasurface concept has emerged as an advantageous reconfigurable antenna architecture for beam forming and wavefront sha**, with applications that include satellite and terrestrial communications, radar, imaging, and wireless power transfer. The metasurface antenna consists of an array of metamaterial elements distributed over an electrically large structure, each subwavelength in dimension and with subwavelength separation between elements. In the antenna configuration we consider here, the metasurface is excited by the fields from an attached waveguide. Each metamaterial element can be modeled as a polarizable dipole that couples the waveguide mode to radiation modes. Distinct from the phased array and electronically scanned antenna (ESA) architectures, a dynamic metasurface antenna does not require active phase shifters and amplifiers, but rather achieves reconfigurability by shifting the resonance frequency of each individual metamaterial element. Here we derive the basic properties of a one-dimensional waveguide-fed metasurface antenna in the approximation that the metamaterial elements do not perturb the waveguide mode and are non-interacting. We derive analytical approximations for the array factors of the 1D antenna, including the effective polarizabilities needed for amplitude-only, phase-only, and binary constraints. Using full-wave numerical simulations, we confirm the analysis, modeling waveguides with slots or complementary metamaterial elements patterned into one of the surfaces. △ Less

Submitted 4 November, 2017; originally announced November 2017.

Comments: Original manuscript as submitted to Physical Review Applied (2017). 14 pages, 14 figures

Journal ref: Phys. Rev. Applied 8, 054048 (2017)

Computational polarimetric microwave imaging

Authors: Thomas Fromenteze, Okan Yurduseven, Michael Boyarsky, Jonah Gollub, Daniel L. Marks, David R. Smith

Abstract: We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architec… ▽ More We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architecture compared with active arrays and other conventional microwave imaging approaches. We further develop the theoretical framework for computational polarimetric imaging and validate the approach experimentally using a multi-modal leaky cavity. The scalar approximation for the interaction between the radiated waves and the target---often applied in microwave computational imaging schemes---is thus extended to retrieve the susceptibility tensors, and hence providing additional information about the targets. Computational polarimetry has relevance for existing systems in the field that extract polarimetric imagery, and particular for ground observation. A growing number of short-range microwave imaging applications can also notably benefit from computational polarimetry, particularly for imaging objects that are difficult to reconstruct when assuming scalar estimations. △ Less

Submitted 4 October, 2017; v1 submitted 16 August, 2017; originally announced August 2017.

Comments: 17 pages, 15 figures

Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures

Authors: Timothy Sleasman, Michael Boyarsky, Mohammadreza F. Imani, Thomas Fromenteze, Jonah N. Gollub, David R. Smith

Abstract: Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying… ▽ More Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying on bandwidth can create difficulties in calibration, alignment, and imaging of dispersive objects. We present an alternative approach using an electrically-large, dynamically reconfigurable, metasurface antenna that generates spatially-distinct radiation patterns as a function of tuning state. The metasurface antenna comprises a waveguide feeding an array of metamaterial radiators, each of whose properties can be modified by applying a voltage to a diode integrated into the element. By deploying two of these apertures, one as the transmitter and one as the receiver, we realize sufficient spatial diversity to alleviate the dependence on frequency bandwidth and obtain both range and cross-range information using measurements at a single frequency. We demonstrate the method experimentally, using one-dimensional dynamic metasurface apertures and reconstructing various two-dimensional scenes (range and cross-range). Furthermore, we modify a conventional microwave imaging technique---the range migration algorithm---to be compatible with such configurations, resulting in an imaging system that is fast and simple in both software and hardware. The imaging scheme presented in this paper has broad application to radio frequency imaging, including security screening, through-wall imaging, biomedical diagnostics, and synthetic aperture radar. △ Less

Submitted 7 August, 2017; v1 submitted 27 March, 2017; originally announced April 2017.

Journal ref: JOSA B 4 (2017) 1713-1726

Experimental Synthetic Aperture Radar with Dynamic Metasurfaces

Authors: Timothy Sleasman, Michael Boyarsky, Laura Pulido-Mancera, Thomas Fromenteze, Mohammadreza F. Imani, Matthew Reynolds, David R. Smith

Abstract: We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a one-dimensional microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band… ▽ More We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a one-dimensional microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band with an applied voltage. The aperture is designed to operate at K band frequencies (17.5 to 20.3 GHz), with a bandwidth of 2.8 GHz. We experimentally demonstrate imaging with a fabricated metasurface aperture using existing SAR modalities, showing image quality comparable to traditional antennas. The agility of this aperture allows it to operate in spotlight and stripmap SAR modes, as well as in a third modality inspired by computational imaging strategies. We describe its operation in detail, demonstrate high-quality imaging in both 2D and 3D, and examine various trade-offs governing the integration of dynamic metasurfaces in future SAR imaging platforms. △ Less

Submitted 23 February, 2017; originally announced March 2017.

An Analysis of Beamed Wireless Power Transfer in the Fresnel Zone Using a Dynamic, Metasurface Aperture

Authors: David R. Smith, Vinay R. Gowda, Okan Yurduseven, Stephane Larouche, Guy Lipworth, Yaroslav Urzhumov, Matthew S. Reynolds

Abstract: Wireless power transfer (WPT) has been an active topic of research, with a number of WPT schemes implemented in the near-field (coupling) and far-field (radiation) regimes. Here, we consider a beamed WPT scheme based on a dynamically reconfigurable source aperture transferring power to receiving devices within the Fresnel (near-zone) region. In this context, the dynamic aperture resembles a reconf… ▽ More Wireless power transfer (WPT) has been an active topic of research, with a number of WPT schemes implemented in the near-field (coupling) and far-field (radiation) regimes. Here, we consider a beamed WPT scheme based on a dynamically reconfigurable source aperture transferring power to receiving devices within the Fresnel (near-zone) region. In this context, the dynamic aperture resembles a reconfigurable lens capable of focusing power to a well-defined spot, whose dimension can be related to a point spread function (PSF). Near-zone focusing can be achieved by generating different amplitude or phase profiles over the aperture, which can be realized using traditional architectures, such as phased arrays. Alternatively, metasurface guided-wave apertures can achieve dynamic focusing, with potentially lower cost implementations. We present an initial tradeoff analysis of the near-zone WPT concept, relating key parameters such as spot size, aperture size, wavelength, focal distance, and availability of sources. We find that approximate design formulas derived from the Gaussian optics approximation provide useful estimates of system performance, including transfer efficiency and coverage volume. The accuracy of these formulas is confirmed using numerical calculations. △ Less

Submitted 21 October, 2016; originally announced October 2016.

Comments: Original manuscript as submitted to Journal of Applied Physics (2016). 27 pages, 12 figures

Transformation optics simulation method for stimulated Brillouin scattering

Authors: Roberto Zecca, Patrick T. Bowen, David R. Smith, Stéphane Larouche

Abstract: We develop a novel approach to enable the full-wave simulation of stimulated Brillouin scattering and related phenomena in a frequency-domain, finite-element environment. The method uses transformation optics techniques to implement a time-harmonic coordinate transform that reconciles the different frames of reference used by electromagnetic and mechanical finite-element solvers. We show how this… ▽ More We develop a novel approach to enable the full-wave simulation of stimulated Brillouin scattering and related phenomena in a frequency-domain, finite-element environment. The method uses transformation optics techniques to implement a time-harmonic coordinate transform that reconciles the different frames of reference used by electromagnetic and mechanical finite-element solvers. We show how this strategy can be successfully applied to bulk and guided systems, comparing the results with the predictions of established theory. △ Less

Submitted 14 October, 2016; originally announced October 2016.

Comments: 10 pages, 8 figures, currently in review

Journal ref: Phys. Rev. A 94, 063818 (2016)

Phaseless computational imaging with a radiating metasurface

Authors: Thomas Fromenteze, Xiaojun Liu, Michael Boyarsky, Jonah Gollub, David R. Smith

Abstract: Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized pseudo-orthogonal radiation patterns to illuminate an object of interest---notably, frequency-diverse metasurfaces have been exploited as fast and low-cost alternative t… ▽ More Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized pseudo-orthogonal radiation patterns to illuminate an object of interest---notably, frequency-diverse metasurfaces have been exploited as fast and low-cost alternative to conventional coherent imaging systems. However, accurately measuring the complex-valued signals in the frequency domain can be burdensome, particularly for sub-centimeter wavelengths. Here, computational imaging is studied under the relaxed constraint of intensity-only measurements. A novel 3D imaging system is conceived based on 'phaseless' and compressed measurements, with benefits from recent advances in the field of phase retrieval. In this paper, the methodology associated with this novel principle is described, studied, and experimentally demonstrated in the microwave range. A comparison of the estimated images from both complex valued and phaseless measurements are presented, verifying the fidelity of phaseless computational imaging. △ Less

Submitted 14 June, 2016; originally announced June 2016.

Comments: 18 pages, 18 figures, article

Second harmonic generation with plasmonic metasurfaces: direct comparison of electric and magnetic resonances

Authors: Rohith Chandrasekar, Naresh K. Emani, Alexei Lagutchev, Vladimir M. Shalaev, Cristian Ciraci, David R. Smith, Alexander V. Kildishev

Abstract: Plasmonic resonances in metallic nanostructures have been shown to drastically enhance local electromagnetic fields, and thereby increase the efficiency of nonlinear optical phenomena, such as second harmonic generation (SHG). While it has been experimentally observed that enhanced fields can significantly boost SHG, to date it proved difficult to probe electrical and magnetic resonances in one an… ▽ More Plasmonic resonances in metallic nanostructures have been shown to drastically enhance local electromagnetic fields, and thereby increase the efficiency of nonlinear optical phenomena, such as second harmonic generation (SHG). While it has been experimentally observed that enhanced fields can significantly boost SHG, to date it proved difficult to probe electrical and magnetic resonances in one and the same nanostructure. This however is necessary to directly compare relative contributions of electrical and magnetic components of SHG enhancement. In this paper we report an experimental study of a metasurface capable of providing electrical and magnetic resonant SHG enhancement for TM polarization. Our metasurface could be engineered such that the peak frequencies of electrical and magnetic resonances could be adjusted independently. We used this feature to distinguish their relative contributions. Experimentally it was observed that the magnetic resonance provides only 50% as much enhancement to SHG as compared to the electric resonance. In addition aligning both resonances in frequency results in conversion efficiency of 1.32 x 10^(-10). △ Less

Submitted 29 September, 2015; originally announced September 2015.

Comments: 9 pages; 7 figures

Influence of spatial dispersion in metals on the optical response of deeply subwavelength slit arrays

Authors: Mathieu Dechaux, Paul-Henri Tichit, Cristian Ciracì, Jessica Benedicto, Rémi Pollès, Emmanuel Centeno, David R. Smith, Antoine Moreau

Abstract: In the framework of the hydrodynamic model describing the response of electrons in a metal, we show that arrays of very narrow and shallow metallic slits have an optical response that is influenced by the spatial dispersion in metals arising from the repulsive interaction between electrons. As a simple Fabry-Perot model is not accurate enough to describe the structure's behavior, we propose to con… ▽ More In the framework of the hydrodynamic model describing the response of electrons in a metal, we show that arrays of very narrow and shallow metallic slits have an optical response that is influenced by the spatial dispersion in metals arising from the repulsive interaction between electrons. As a simple Fabry-Perot model is not accurate enough to describe the structure's behavior, we propose to consider the slits as generalized cavities with two modes, one being propagative and the other evanescent. This very general model allows to conclude that the impact of spatial dispersion on the propagative mode is the key factor explaining why the whole structure is sensitive to spatial dispersion. As the fabrication of such structures with relatively large gaps compared to previous experiments is within our reach, this work paves the way for future much needed experiments on nonlocality. △ Less

Submitted 22 January, 2016; v1 submitted 23 January, 2015; originally announced January 2015.

Journal ref: Physical Review B 93, 045413 (2016)

Nonlocality in metallo-dielectric multilayers: numerical tools and physical analysis

Authors: Jessica Benedicto, Rémi Pollès, Cristian Ciracì, Emmanuel Centeno, David R. Smith, Antoine Moreau

Abstract: We provide theoretical and numerical tools to quantitatively study the impact of nonlocality arising from free electrons in metals on the optical properties of metallo-dielectric multilayers. Though effects due to nonlocality are in general quite small, they nevertheless can be important for very thin (typically below 10 nm) metallic layers - as are used in structures characterized by relatively f… ▽ More We provide theoretical and numerical tools to quantitatively study the impact of nonlocality arising from free electrons in metals on the optical properties of metallo-dielectric multilayers. Though effects due to nonlocality are in general quite small, they nevertheless can be important for very thin (typically below 10 nm) metallic layers - as are used in structures characterized by relatively flat dispersion curves. Such structures include those with negative refractive index; hyperbolic metamaterials; and materials with index near zero. We find in all cases that the inclusion of nonlocal effects through application of the hydrodynamic model to the electron response leads to a higher transmission through the considered medium. Finally, we examine the excitation of gap-plasmon resonances, where nonlocality plays a much greater role, and suggest possible routes for experimental investigation. △ Less

Submitted 18 October, 2014; originally announced October 2014.

Light sterile neutrino sensitivity at the nuSTORM facility

Authors: D. Adey, S. K. Agarwalla, C. M. Ankenbrandt, R. Asfandiyarov, J. J. Back, G. Barker, E. Baussan, R. Bayes, S. Bhadra, V. Blackmore, A. Blondel, S. A. Bogacz, C. Booth, S. B. Boyd, S. G. Bramsiepe, A. Bravar, S. J. Brice, A. D. Bross, F. Cadoux, H. Cease, A. Cervera, J. Cobb, D. Colling, P. Coloma, L. Coney , et al. (87 additional authors not shown)

Abstract: A facility that can deliver beams of electron and muon neutrinos from the decay of a stored muon beam has the potential to unambiguously resolve the issue of the evidence for light sterile neutrinos that arises in short-baseline neutrino oscillation experiments and from estimates of the effective number of neutrino flavors from fits to cosmological data. In this paper, we show that the nuSTORM fac… ▽ More A facility that can deliver beams of electron and muon neutrinos from the decay of a stored muon beam has the potential to unambiguously resolve the issue of the evidence for light sterile neutrinos that arises in short-baseline neutrino oscillation experiments and from estimates of the effective number of neutrino flavors from fits to cosmological data. In this paper, we show that the nuSTORM facility, with stored muons of 3.8 GeV/c $\pm$ 10%, will be able to carry out a conclusive muon neutrino appearance search for sterile neutrinos and test the LSND and MiniBooNE experimental signals with 10$σ$ sensitivity, even assuming conservative estimates for the systematic uncertainties. This experiment would add greatly to our knowledge of the contribution of light sterile neutrinos to the number of effective neutrino flavors from the abundance of primordial helium production and from constraints on neutrino energy density from the cosmic microwave background. The appearance search is complemented by a simultaneous muon neutrino disappearance analysis that will facilitate tests of various sterile neutrino models. △ Less

Submitted 21 February, 2014; originally announced February 2014.

Comments: 7 pages, 5 figures, submitted to Physical Review D

Dramatic Enhancement of Third-Harmonic Generation in Plasmonic Nanostructures via Nonlocal Effects

Authors: Cristian Ciracì, Michael Scalora, David R. Smith

Abstract: Classical nonlocality in conducting nanostructures has been shown to dramatically alter the linear optical response, by placing a fundamental limit on the maximum field enhancement that can be achieved. This limit directly extends to all nonlinear processes, which depend on field amplitudes. A study of third-harmonic generation in metal film-coupled nanowires reveals that for sub-nanometer vacuum… ▽ More Classical nonlocality in conducting nanostructures has been shown to dramatically alter the linear optical response, by placing a fundamental limit on the maximum field enhancement that can be achieved. This limit directly extends to all nonlinear processes, which depend on field amplitudes. A study of third-harmonic generation in metal film-coupled nanowires reveals that for sub-nanometer vacuum gaps the nonlocality enhances the effective nonlinearity by four orders of magnitude as the field penetrates deeper inside the metal than that predicted assuming a purely local electronic response. △ Less

Submitted 13 November, 2013; originally announced November 2013.

nuSTORM - Neutrinos from STORed Muons: Proposal to the Fermilab PAC

Authors: D. Adey, S. K. Agarwalla, C. M. Ankenbrandt, R. Asfandiyarov, J. J. Back, G. Barker, E. Baussan, R. Bayes, S. Bhadra, V. Blackmore, A. Blondel, S. A. Bogacz, C. Booth, S. B. Boyd, A. Bravar, S. J. Brice, A. D. Bross, F. Cadoux, H. Cease, A. Cervera, J. Cobb, D. Colling, P. Coloma, L. Coney, A. Dobbs , et al. (88 additional authors not shown)

Abstract: The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neu… ▽ More The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neutrino-oscillation programs by providing definitive measurements of electron neutrino and muon neutrino scattering cross sections off nuclei with percent-level precision; and 3. Constitutes the crucial first step in the development of muon accelerators as a powerful new technique for particle physics. The document describes the facility in detail and demonstrates its physics capabilities. This document was submitted to the Fermilab Physics Advisory Committee in consideration for Stage I approval. △ Less

Submitted 31 July, 2013; originally announced August 2013.

Neutrinos from Stored Muons nuSTORM: Expression of Interest

Authors: D. Adey, S. K. Agarwalla, C. M. Ankenbrandt, R. Asfandiyarov, J. J. Back, G. Barker, E. Baussan, R. Bayes, S. Bhadra, V. Blackmore, A. Blondel, S. A. Bogacz, C. Booth, S. B. Boyd, A. Bravar, S. J. Brice, A. D. Bross, F. Cadoux, H. Cease, A. Cervera, J. Cobb, D. Colling, L. Coney, A. Dobbs, J. Dobson , et al. (84 additional authors not shown)

Abstract: The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sect… ▽ More The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sections with percent-level precision; allow searches for sterile neutrinos of exquisite sensitivity to be carried out; and constitute the essential first step in the incremental development of muon accelerators as a powerful new technique for particle physics. Of the world's proton-accelerator laboratories, only CERN and FNAL have the infrastructure required to mount nuSTORM. Since no siting decision has yet been taken, the purpose of this Expression of Interest (EoI) is to request the resources required to: investigate in detail how nuSTORM could be implemented at CERN; and develop options for decisive European contributions to the nuSTORM facility and experimental programme wherever the facility is sited. The EoI defines a two-year programme culminating in the delivery of a Technical Design Report. △ Less

Submitted 7 May, 2013; originally announced May 2013.

Comments: 59 pages; 24 figures; 5 tables

Report number: CERN-SPSC-2013-015 / SPSC-EOI-009

Flow stabilization with active hydrodynamic cloaks

Authors: Yaroslav A. Urzhumov, David R. Smith

Abstract: We demonstrate that fluid flow cloaking solutions based on active hydrodynamic metamaterials exist for two-dimensional flows past a cylinder in a wide range of Reynolds numbers, up to approximately 200. Within the framework of the classical Brinkman equation for homogenized porous flow, we demonstrate using two different methods that such cloaked flows can be dynamically stable for $Re$ in the ran… ▽ More We demonstrate that fluid flow cloaking solutions based on active hydrodynamic metamaterials exist for two-dimensional flows past a cylinder in a wide range of Reynolds numbers, up to approximately 200. Within the framework of the classical Brinkman equation for homogenized porous flow, we demonstrate using two different methods that such cloaked flows can be dynamically stable for $Re$ in the range 5-119. The first, highly efficient, method is based on a linearization of the Brinkman-Navier-Stokes equation and finding the eigenfrequencies of the least stable eigen-perturbations; the second method is a direct, numerical integration in the time domain. We show that, by suppressing the Karman vortex street in the weekly turbulent wake, porous flow cloaks can raise the critical Reynolds number up to about 120, or five times greater than for a bare, uncloaked cylinder. △ Less

Submitted 20 December, 2012; originally announced December 2012.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. E 86, 056313 (2012)

The impact of nonlocal response on metallo-dielectric multilayers and optical patch antennas

Authors: Antoine Moreau, Cristian Ciracì, David R. Smith

Abstract: We analyze the impact of nonlocality on the waveguide modes of metallo-dielectric multilayers and optical patch antennas, the latter formed from metal strips closely spaced above a metallic plane. We model both the nonlocal effects associated with the conduction electrons of the metal, as well as the previously overlooked response of bound electrons. We show that the fundamental mode of a metal-di… ▽ More We analyze the impact of nonlocality on the waveguide modes of metallo-dielectric multilayers and optical patch antennas, the latter formed from metal strips closely spaced above a metallic plane. We model both the nonlocal effects associated with the conduction electrons of the metal, as well as the previously overlooked response of bound electrons. We show that the fundamental mode of a metal-dielectric-metal waveguide, sometimes called the gap-plasmon, is very sensitive to nonlocality when the insulating, dielectric layers are thinner than 5 nm. We suggest that optical patch antennas, which can easily be fabricated with controlled dielectric spacer layers and can be interrogated using far-field scattering, can enable the measurement of nonlocality in metals with good accuracy. △ Less

Submitted 17 December, 2012; v1 submitted 23 November, 2012; originally announced November 2012.

Low-loss directional cloaks without superluminal velocity or magnetic response

Authors: Yaroslav Urzhumov, David R. Smith

Abstract: The possibility of making an optically large (many wavelengths in diameter) object appear invisible has been a subject of many recent studies. Exact invisibility scenarios for large (relative to the wavelength) objects involve (meta)materials with superluminal phase velocity (refractive index less than unity) and/or magnetic response. We introduce a new approximation applicable to certain device g… ▽ More The possibility of making an optically large (many wavelengths in diameter) object appear invisible has been a subject of many recent studies. Exact invisibility scenarios for large (relative to the wavelength) objects involve (meta)materials with superluminal phase velocity (refractive index less than unity) and/or magnetic response. We introduce a new approximation applicable to certain device geometries in the eikonal limit: piecewise-uniform scaling of the refractive index. This transformation preserves the ray trajectories, but leads to a uniform phase delay. We show how to take advantage of phase delays to achieve a limited (directional and wavelength-dependent) form of invisibility that does not require loss-ridden (meta)materials with superluminal phase velocities. △ Less

Submitted 25 September, 2012; originally announced September 2012.

Comments: 3 pages, 2 figures

Electronically reconfigurable metal-on-silicon metamaterial

Authors: Yaroslav Urzhumov, Jae Seung Lee, Talmage Tyler, Sulochana Dhar, Vinh Nguyen, Nan M. Jokerst, Paul Schmalenberg, David R. Smith

Abstract: Reconfigurable metamaterial-based apertures can play a unique role in both imaging and in beam-forming applications, where current technology relies mostly on the fabrication and integration of large detector or antenna arrays. Here, we report the experimental demonstration of a voltage-controlled, silicon-based electromagnetic metamaterial operating in the W-band (75-110 GHz). In this composite s… ▽ More Reconfigurable metamaterial-based apertures can play a unique role in both imaging and in beam-forming applications, where current technology relies mostly on the fabrication and integration of large detector or antenna arrays. Here, we report the experimental demonstration of a voltage-controlled, silicon-based electromagnetic metamaterial operating in the W-band (75-110 GHz). In this composite semiconductor metamaterial, patterned gold metamaterial elements serve both to manage electromagnetic wave propagation while simultaneously acting as electrical Schottky contacts that control the local conductivity of the semiconductor substrate. The active device layers consist of a patterned metal on a 2-μm-thick n-doped silicon layer, adhesively bonded to a transparent Pyrex wafer. The transmittance of the composite metamaterial can be modulated over a given frequency band as a function of bias voltage. We demonstrate a quantitative understanding of the composite device through the application of numerical approaches that simultaneously treat the semiconductor junction physics as well as wave propagation. △ Less

Submitted 6 August, 2012; originally announced August 2012.

Comments: 28 double-spaced pages, 8 figures

Theory and Techniques for Synthesizing a Family of Graph Algorithms

Authors: Srinivas Nedunuri, William R. Cook, Douglas R. Smith

Abstract: Although Breadth-First Search (BFS) has several advantages over Depth-First Search (DFS) its prohibitive space requirements have meant that algorithm designers often pass it over in favor of DFS. To address this shortcoming, we introduce a theory of Efficient BFS (EBFS) along with a simple recursive program schema for carrying out the search. The theory is based on dominance relations, a long stan… ▽ More Although Breadth-First Search (BFS) has several advantages over Depth-First Search (DFS) its prohibitive space requirements have meant that algorithm designers often pass it over in favor of DFS. To address this shortcoming, we introduce a theory of Efficient BFS (EBFS) along with a simple recursive program schema for carrying out the search. The theory is based on dominance relations, a long standing technique from the field of search algorithms. We show how the theory can be used to systematically derive solutions to two graph algorithms, namely the Single Source Shortest Path problem and the Minimum Spanning Tree problem. The solutions are found by making small systematic changes to the derivation, revealing the connections between the two problems which are often obscured in textbook presentations of them. △ Less

Submitted 3 July, 2012; originally announced July 2012.

Comments: In Proceedings SYNT 2012, arXiv:1207.0554

Journal ref: EPTCS 84, 2012, pp. 33-46

nuSTORM: Neutrinos from STORed Muons

Authors: P. Kyberd, D. R. Smith, L. Coney, S. Pascoli, C. Ankenbrandt, S. J. Brice, A. D. Bross, H. Cease, J. Kopp, N. Mokhov, J. Morfin, D. Neuffer, M. Popovic, P. Rubinov, S. Striganov, A. Blondel, A. Bravar, E. Noah, R. Bayes, F. J. P. Soler, A. Dobbs, K. Long, J. Pasternak, E. Santos, M. O. Wascko , et al. (13 additional authors not shown)

Abstract: The results of LSND and MiniBooNE, along with the recent papers on a possible reactor neutrino flux anomaly give tantalizing hints of new physics. Models beyond the neutrino-SM have been developed to explain these results and involve one or more additional neutrinos that are non-interacting or "sterile." Neutrino beams produced from the decay of muons in a racetrack-like decay ring provide a power… ▽ More The results of LSND and MiniBooNE, along with the recent papers on a possible reactor neutrino flux anomaly give tantalizing hints of new physics. Models beyond the neutrino-SM have been developed to explain these results and involve one or more additional neutrinos that are non-interacting or "sterile." Neutrino beams produced from the decay of muons in a racetrack-like decay ring provide a powerful way to study this potential new physics. In this Letter of Intent, we describe a facility, nuSTORM, "Neutrinos from STORed Muons," and an appropriate far detector for neutrino oscillation searches at short baseline. We present sensitivity plots that indicated that this experimental approach can provide over 10 sigma confirmation or rejection of the LSND/MinBooNE results. In addition we indicate how the facility can be used to make precision neutrino interaction cross section measurements important to the next generation of long-baseline neutrino oscillation experiments. △ Less

Submitted 1 June, 2012; originally announced June 2012.

Report number: Fermilab P-1028

Origin of second-harmonic generation enhancement in optical split-ring resonators

Authors: Cristian Ciracì, Ekaterina Poutrina, Michael Scalora, David R. Smith

Abstract: We present a study of the second-order nonlinear optical properties of metal-based metamaterials. A hydrodynamic model for electronic response is used, in which nonlinear surface contributions are expressed in terms of the bulk polarization. The model is in good agreement with published experimental results, and clarifies the mechanisms contributing to the nonlinear response. In particular, we sho… ▽ More We present a study of the second-order nonlinear optical properties of metal-based metamaterials. A hydrodynamic model for electronic response is used, in which nonlinear surface contributions are expressed in terms of the bulk polarization. The model is in good agreement with published experimental results, and clarifies the mechanisms contributing to the nonlinear response. In particular, we show that the reported enhancement of second-harmonic in split-ring resonator based media is driven by the electric rather than the magnetic properties of the structure. △ Less

Submitted 25 April, 2012; originally announced April 2012.

Reconciliation of generalized refraction with diffraction theory

Authors: Stéphane Larouche, David R. Smith

Abstract: When an electromagnetic wave is obliquely incident on the interface between two homogeneous media with different refractive indices, the requirement of phase continuity across the interface generally leads to a shift in the trajectory of the wave. When a linearly position dependent phase shift is imposed at the interface, the resulting refraction may be described using a generalized version of Sne… ▽ More When an electromagnetic wave is obliquely incident on the interface between two homogeneous media with different refractive indices, the requirement of phase continuity across the interface generally leads to a shift in the trajectory of the wave. When a linearly position dependent phase shift is imposed at the interface, the resulting refraction may be described using a generalized version of Snell's law. In this Letter, we establish a formal equivalence between generalized refraction and blazed diffraction gratings, further discussing the relative merits of the two approaches. △ Less

Submitted 10 April, 2012; originally announced April 2012.

Comments: Submitted to Optics Letters