-
Control Software for the SST-1M Small-Size Telescope prototype for the Cherenkov Telescope Array
Authors:
V. Sliusar,
R. Walter,
C. Alispach,
I. Al Samarai,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
A. Frankowski,
M. Grudzińska,
M. Heller,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
J. Michałowski,
R. Moderski,
T. Montaruli
, et al. (18 additional authors not shown)
Abstract:
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA), the first prototype has already been deployed. The SST-1M control software of all subsystems (active mirror control, drive system, safety system, photo-detection plane…
▽ More
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA), the first prototype has already been deployed. The SST-1M control software of all subsystems (active mirror control, drive system, safety system, photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself (master controller) uses the standard software design proposed for all CTA telescopes based on the ALMA Common Software (ACS) developed to control the Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a separate ACS component, which handles the communication to and the operation of the subsystem. Interfacing with the actual hardware is performed via the OPC UA communication protocol, supported either natively by dedicated industrial standard servers (PLCs) or separate service applications developed to wrap lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early operations of the telescope without the camera were already carried out. The camera is fully assembled and is capable to perform data acquisition using artificial light source.
△ Less
Submitted 14 September, 2017; v1 submitted 13 September, 2017;
originally announced September 2017.
-
Development of a strategy for calibrating the novel SiPM camera of the SST-1M telescope proposed for the Cherenkov Telescope Array
Authors:
I. Al Samarai,
C. Alispach,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Nagai,
T. R. S. Njoh Ekoume,
I. Troyano Pujadas,
E. Lyard,
A. Neronov,
R. Walter,
V. Sliusar,
E. Mach,
J. Michałowski,
J. Niemiec,
J. Rafalski,
K. Skowron,
M. Stodulska,
M. Stodulski,
T. Bulik,
M. Grudzińska,
M. Jamrozy
, et al. (14 additional authors not shown)
Abstract:
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with 9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the requirements of the next generation ground based gamma-ray observatory CTA in the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of gamma-ray telescopes c…
▽ More
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with 9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the requirements of the next generation ground based gamma-ray observatory CTA in the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of gamma-ray telescopes can achieve good performance even during high night sky background conditions. Defining a fully automated calibration strategy of SiPM cameras is of great importance for large scale production validation and online calibration. The SST-1M sub-consortium developed a software compatible with CTA pipeline software (CTApipe). The calibration of the SST-1M camera is based on the Camera Test Setup (CTS), a set of LED boards mounted in front of the camera. The CTS LEDs are operated in pulsed or continuous mode to emulate signal and night sky background respectively. Continuous and pulsed light data analysis allows us to extract single pixel calibration parameters to be used during CTA operation.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Performance of a small size telescope (SST-1M) camera for gamma-ray astronomy with the Cherenkov Telescope Array
Authors:
I. Al Samarai,
C. Alispach,
F. Cadoux,
V. Coco,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Nagai,
T. R. S. Njoh Ekoume,
I. Troyano Pujadas,
E. Lyard,
A. Neronov,
R. Walter,
V. Sliusar,
E. Mach,
J. Michałowski,
J. Niemiec,
J. Rafalski,
K. Skowron,
M. Stodulska,
M. Stodulski,
T. Bulik,
M. Grudzińska,
M. Jamrozy
, et al. (14 additional authors not shown)
Abstract:
The foreseen implementations of the Small Size Telescopes (SST) in CTA will provide unique insights into the highest energy gamma rays offering fundamental means to discover and under- stand the sources populating the Galaxy and our local neighborhood. Aiming at such a goal, the SST-1M is one of the three different implementations that are being prototyped and tested for CTA. SST-1M is a Davies-Co…
▽ More
The foreseen implementations of the Small Size Telescopes (SST) in CTA will provide unique insights into the highest energy gamma rays offering fundamental means to discover and under- stand the sources populating the Galaxy and our local neighborhood. Aiming at such a goal, the SST-1M is one of the three different implementations that are being prototyped and tested for CTA. SST-1M is a Davies-Cotton single mirror telescope equipped with a unique camera technology based on SiPMs with demonstrated advantages over classical photomultipliers in terms of duty-cycle. In this contribution, we describe the telescope components, the camera, and the trigger and readout system. The results of the commissioning of the camera using a dedicated test setup are then presented. The performances of the camera first prototype in terms of expected trigger rates and trigger efficiencies for different night-sky background conditions are presented, and the camera response is compared to end-to-end simulations.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
The Single Mirror Small Sized Telescope For The Cherenkov Telescope Array
Authors:
M. Heller,
E. jr Schioppa,
A. Porcelli,
I. Troyano Pujadas,
K. Zietara,
D. della Volpe,
T. Montaruli,
F. Cadoux,
Y. Favre,
J. A. Aguilar,
A. Christov,
E. Prandini,
P. Rajda,
M. Rameez,
W. Bilnik,
J. Blocki,
L. Bogacz,
J. Borkowski,
T. Bulik,
A. Frankowski,
M. Grudzinska,
B. Idzkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek
, et al. (24 additional authors not shown)
Abstract:
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include Medium Sized Telescopes (MST) in its threshold configuration. Optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the SST-1M uses…
▽ More
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA). About 70 SST telescopes will be part the CTA southern array which will also include Medium Sized Telescopes (MST) in its threshold configuration. Optimized for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the SST-1M uses a Davies-Cotton optics with a 4 m dish diameter with a field of view of 9 degrees. The Cherenkov light resulting from the interaction of the gamma-rays in the atmosphere is focused onto a 88 cm side-to-side hexagonal photo-detection plane. The latter is composed of 1296 hollow light guides coupled to large area hexagonal silicon photomultipliers (SiPM). The SiPM readout is fully digital readout as for the trigger system. The compact and lightweight design of the SST-1M camera offers very high performance ideal for gamma-ray observation requirement. In this contribution, the concept, design, performance and status of the first telescope prototype are presented.
△ Less
Submitted 6 October, 2016;
originally announced October 2016.
-
An innovative silicon photomultiplier digitizing camera for gamma-ray astronomy
Authors:
Matthieu Heller,
Enrico Junior Schioppa,
Alessio Porcelli,
Isaac Troyano Pujadas,
Krzysztof Zietara,
Domenico Della Volpe,
Teresa Montaruli,
Franck Cadoux,
Yannick Favre,
Juan Antonio Aguilar Sanchez,
Asen Christov,
Elisa Prandini,
Pawel Rajda,
Mohamed Rameez,
Woijciech Blinik,
Jacek Blocki,
Leszek Bogacz,
Jurek Borkowski,
Tomasz Bulik,
Adam Frankowski,
Mira Grudzinska,
Bartosz Idzkowski,
Mateusz Jamrozy,
Mateusz Janiak,
Jerzy Kasperek
, et al. (22 additional authors not shown)
Abstract:
The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is…
▽ More
The single-mirror small-size telescope (SST-1M) is one of the three proposed designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array (CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror dish and an innovative fully digital camera based on silicon photo-multipliers (SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the challenge is not only to build a telescope with excellent performance, but also to design it so that its components can be commissioned, assembled and tested by industry. In this paper we review the basic steps that led to the design concepts for the SST-1M camera and the ongoing realization of the first prototype, with focus on the innovative solutions adopted for the photodetector plane and the readout and trigger parts of the camera. In addition, we report on results of laboratory measurements on real scale elements that validate the camera design and show that it is capable of matching the CTA requirements of operating up to high-moon-light background conditions.
△ Less
Submitted 12 July, 2016;
originally announced July 2016.
-
Prototype of the SST-1M Telescope Structure for the Cherenkov Telescope Array
Authors:
J. Niemiec,
W. Bilnik,
J. Błocki,
L. Bogacz,
J. Borkowski,
T . Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (27 additional authors not shown)
Abstract:
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish diameter of 4 m has been built by a consortium of Polish and Swiss institutions as a prototype for one of the proposed small-size telescopes for the southern observatory of the Cherenkov Telescope Array (CTA). The design represents a very simple, reliable, and cheap solution. The mechanical structure prototype with its drive s…
▽ More
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish diameter of 4 m has been built by a consortium of Polish and Swiss institutions as a prototype for one of the proposed small-size telescopes for the southern observatory of the Cherenkov Telescope Array (CTA). The design represents a very simple, reliable, and cheap solution. The mechanical structure prototype with its drive system is now being tested at the Institute of Nuclear Physics PAS in Krakow. Here we present the design of the prototype and results of the performance tests of the structure and the drive and control system.
△ Less
Submitted 6 September, 2015;
originally announced September 2015.
-
Using muon rings for the optical throughput calibration of the SST-1M prototype for the Cherenkov Telescope Array
Authors:
S. Toscano,
E. Prandini,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (26 additional authors not shown)
Abstract:
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments devoted to the study of very high energy gamma-rays coming from space. The detection technique consists of observing images created by the Cherenkov light emitted when gamma rays, or more generally cosmic rays, propagate through the atmosphere. While in the case of protons or gamma-rays the images present a filled and mo…
▽ More
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments devoted to the study of very high energy gamma-rays coming from space. The detection technique consists of observing images created by the Cherenkov light emitted when gamma rays, or more generally cosmic rays, propagate through the atmosphere. While in the case of protons or gamma-rays the images present a filled and more or less elongated shape, energetic muons penetrating the atmosphere are visualised as characteristic circular rings or arcs. A relatively simple analysis of the ring images allows the reconstruction of all the relevant parameters of the detected muons, such as the energy, the impact parameter, and the incoming direction, with the final aim to use them to calibrate the total optical throughput of the given IACT telescope. We present the results of preliminary studies on the use of images created by muons as optical throughput calibrators of the single mirror small size telescope prototype SST-1M proposed for the Cherenkov Telescope Array.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
Software design for the control system for Small-Size Telescopes with single-mirror of the Cherenkov Telescope Array
Authors:
A. Porcelli,
W. Bilnik,
J. Błocki,
L. Bogacz,
J. Borkowski,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (28 additional authors not shown)
Abstract:
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton telescope and is among the proposed telescope designs for the Cherenkov Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV) coverage. The SST-1M contains proven technology for the telescope structure and innovative electronics and photosensors for the camera. Its design is meant to be simple, lo…
▽ More
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton telescope and is among the proposed telescope designs for the Cherenkov Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV) coverage. The SST-1M contains proven technology for the telescope structure and innovative electronics and photosensors for the camera. Its design is meant to be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a dedicated industrial standard server. The software is being developed in collaboration with the CTA Medium-Size Telescopes to ensure compatibility and uniformity of the array control. Early operations of the SST-1M prototype will be performed with a subset of the CTA central array control system based on the Alma Common Software (ACS). The triggered event data are time stamped, formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope is described, as well as the interface between the telescope abstraction to the CTA central control and the data acquisition system.
△ Less
Submitted 29 August, 2015;
originally announced August 2015.
-
Development of the optical system for the SST-1M telescope of the Cherenkov Telescope Array observatory
Authors:
K. Seweryn,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Chruślińska,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (36 additional authors not shown)
Abstract:
The prototype of a Davies-Cotton small size telescope (SST-1M) has been designed and developed by a consortium of Polish and Swiss institutions and proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose of the optical system is to focus the Cherenkov light emitted by extensive air showers in the atmosphere onto the focal plane detectors. The main component of the system is…
▽ More
The prototype of a Davies-Cotton small size telescope (SST-1M) has been designed and developed by a consortium of Polish and Swiss institutions and proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose of the optical system is to focus the Cherenkov light emitted by extensive air showers in the atmosphere onto the focal plane detectors. The main component of the system is a dish consisting of 18 hexagonal mirrors with a total effective collection area of 6.47 m2 (including the shadowing and estimated mirror reflectivity). Such a solution was chosen taking into account the analysis of the Cherenkov light propagation and based on optical simulations. The proper curvature and stability of the dish is ensured by the mirror alignment system and the isostatic interface to the telescope structure. Here we present the design of the optical subsystem together with the performance measurements of its components.
△ Less
Submitted 27 August, 2015;
originally announced August 2015.
-
Performance of the SST-1M telescope for the Cherenkov Telescope Array observatory
Authors:
R. Moderski,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Chruślińska,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (29 additional authors not shown)
Abstract:
The single mirror small-size telescope (SST-1M) is one of the telescope projects being proposed for the Cherenkov Telescope Array observatory by a sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure is currently being constructed at the Institute of Nuclear Physics in Cracow, Poland, while the camera will be assembled at the University of Geneva, Switzerland. This proto…
▽ More
The single mirror small-size telescope (SST-1M) is one of the telescope projects being proposed for the Cherenkov Telescope Array observatory by a sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure is currently being constructed at the Institute of Nuclear Physics in Cracow, Poland, while the camera will be assembled at the University of Geneva, Switzerland. This prototype enables measurements of parameters having a decisive influence on the telescope performance. We present results of numerical simulations of the SST-1M performance based on such measurements. The telescope effective area, the expected trigger rates and the optical point spread function are calculated.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
The SST-1M camera for the Cherenkov Telescope Array
Authors:
E. J. Schioppa,
F. Cadoux,
A. Christov,
D. della Volpe,
Y. Favre,
M. Heller,
T. Montaruli,
A. Porcelli,
M. Rameez,
I. Troyano Pujadas,
W. Bilnik,
J. Blocki,
L. Bogacz,
T. Bulik,
M. Curylo,
M. Dyrda,
A. Frankowski,
L. Grudniki,
M. Grudzinska,
B. Idzkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard
, et al. (26 additional authors not shown)
Abstract:
The prototype camera of the single-mirror Small Size Telescopes (SST-1M) proposed for the Cherenkov Telescope Array (CTA) project has been designed to be very compact and to deliver high performance over thirty years of operation. The camera is composed of an hexagonal photo-detection plane made of custom designed large area hexagonal silicon photomultipliers and a high throughput, highly configur…
▽ More
The prototype camera of the single-mirror Small Size Telescopes (SST-1M) proposed for the Cherenkov Telescope Array (CTA) project has been designed to be very compact and to deliver high performance over thirty years of operation. The camera is composed of an hexagonal photo-detection plane made of custom designed large area hexagonal silicon photomultipliers and a high throughput, highly configurable, fully digital readout and trigger system (DigiCam). The camera will be installed on the telescope structure at the H. Niewodnicza{ń}ski institute of Nuclear Physics in Krakow in fall 2015. In this contribution, we review the steps that led to the development of the innovative photo-detection plane and readout electronics, and we describe the test and calibration strategy adopted.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
Camera calibration strategy of the SST-1M prototype of the Cherenokov Telescope Array
Authors:
E. Prandini,
M. Heller,
E. Lyard,
E. jr. Schioppa,
A. Neronov,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Mach,
D. Mandat
, et al. (26 additional authors not shown)
Abstract:
The SST-1M telescope is one of the prototypes under construction proposed to be part of the future Cherenkov Telescope Array. It uses a standard Davis-Cotton design for the optics and telescope structure, with a dish diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296 pixels including entrance window, light co…
▽ More
The SST-1M telescope is one of the prototypes under construction proposed to be part of the future Cherenkov Telescope Array. It uses a standard Davis-Cotton design for the optics and telescope structure, with a dish diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296 pixels including entrance window, light concentrators, Silicon Photomultipliers (SiPMs), and pre-amplifier stages together with a fully digital readout and trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain designed for the SST-1M prototype. In particular we focus on the calibration strategy used to convert the SiPM signals registered by DigiCam to the quantities needed for Cherenkov image analysis. The calibration is based on an online feedback system to stabilize the gain of the SiPMs, as well as dedicated events (dark count, pedestal, and light flasher events) to be taken during the normal operation of the prototype.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the SST-1M Telescope proposed for the Cherenkov Telescope Array
Authors:
P. Rajda,
K. Ziętara,
W. Bilnik,
J. Błocki,
L. Bogacz,
T. Bulik,
F. Cadoux,
A. Christov,
M. Curyło,
D. della Volpe,
M. Dyrda,
Y. Favre,
A. Frankowski,
Ł. Grudnik,
M. Grudzińska,
M. Heller,
B. Idźkowski,
M. Jamrozy,
M. Janiak,
J. Kasperek,
K. Lalik,
E. Lyard,
E. Mach,
D. Mandat,
A. Marszałek
, et al. (26 additional authors not shown)
Abstract:
The SST-1M is one of three prototype small-sized telescope designs proposed for the Cherenkov Telescope Array, and is built by a consortium of Polish and Swiss institutions. The SST-1M will operate with DigiCam - an innovative, compact camera with fully digital read-out and trigger electronics. A high level of integration will be achieved by massively deploying state-of-the-art multi-gigabit trans…
▽ More
The SST-1M is one of three prototype small-sized telescope designs proposed for the Cherenkov Telescope Array, and is built by a consortium of Polish and Swiss institutions. The SST-1M will operate with DigiCam - an innovative, compact camera with fully digital read-out and trigger electronics. A high level of integration will be achieved by massively deploying state-of-the-art multi-gigabit transmission channels, beginning from the ADC flash converters, through the internal data and trigger signals transmission over backplanes and cables, to the camera's server link. Such an approach makes it possible to design the camera to fit the size and weight requirements of the SST-1M exactly, and provide low power consumption, high reliability and long lifetime. The structure of the digital electronics will be presented, along with main physical building blocks and the internal architecture of FPGA functional subsystems.
△ Less
Submitted 25 August, 2015;
originally announced August 2015.