-
Modeling the effect of wind speed and direction shear on utility-scale wind turbine power production
Authors:
Storm A. Mata,
Juan José Pena MartÍnez,
Jesús Bas Quesada,
Felipe Palou Larrañaga,
Neeraj Yadav,
Jasvipul S. Chawla,
Varun Sivaram,
Michael F. Howland
Abstract:
Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuato…
▽ More
Wind speed and direction variations across the rotor affect power production. As utility-scale turbines extend higher into the atmospheric boundary layer (ABL) with larger rotor diameters and hub heights, they increasingly encounter more complex wind speed and direction variations. We assess three models for power production that account for wind speed and direction shear. Two are based on actuator disc representations and the third is a blade element representation. We also evaluate the predictions from a standard power curve model that has no knowledge of wind shear. The predictions from each model, driven by wind profile measurements from a profiling LiDAR, are compared to concurrent power measurements from an adjacent utility-scale wind turbine. In the field measurements of the utility-scale turbine, discrete combinations of speed and direction shear induce changes in power production of -19% to +34% relative to the turbine power curve for a given hub height wind speed. Positive speed shear generally corresponds to over-performance and positive direction shear to under-performance, relative to the power curve. Overall, the blade element model produces both higher correlation and lower error relative to the other models, but its quantitative accuracy depends on induction and controller sub-models. To further assess the influence of complex, non-monotonic wind profiles, we also drive the models with best-fit power law wind speed profiles and linear wind direction profiles. These idealized inputs produce qualitative and quantitative differences in power predictions from each model, demonstrating that time-varying, non-monotonic wind shear affects wind power production.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Collective wind farm operation based on a predictive model increases utility-scale energy production
Authors:
Michael F. Howland,
Jesus Bas Quesada,
Juan Jose Pena Martinez,
Felipe Palou Larranaga,
Neeraj Yadav,
Jasvipul S. Chawla,
Varun Sivaram,
John O. Dabiri
Abstract:
Wind turbines located in wind farms are operated to maximize only their own power production. Individual operation results in wake losses that reduce farm energy. In this study, we operate a wind turbine array collectively to maximize total array production through wake steering. The selection of the farm control strategy relies on the optimization of computationally efficient flow models. We deve…
▽ More
Wind turbines located in wind farms are operated to maximize only their own power production. Individual operation results in wake losses that reduce farm energy. In this study, we operate a wind turbine array collectively to maximize total array production through wake steering. The selection of the farm control strategy relies on the optimization of computationally efficient flow models. We develop a physics-based, data-assisted flow control model to predict the optimal control strategy. In contrast to previous studies, we first design and implement a multi-month field experiment at a utility-scale wind farm to validate the model over a range of control strategies, most of which are suboptimal. The flow control model is able to predict the optimal yaw misalignment angles for the array within +/- 5 degrees for most wind directions (11-32% power gains). Using the validated model, we design a control protocol which increases the energy production of the farm in a second multi-month experiment by 2.7% and 1.0%, for the wind directions of interest and for wind speeds between 6 and 8 m/s and all wind speeds, respectively. The developed and validated predictive model can enable a wider adoption of collective wind farm operation.
△ Less
Submitted 26 January, 2022;
originally announced February 2022.
-
Atomic reconstruction and moiré patterns in transition metal dichalcogenide van der Waals heterostructures
Authors:
Matthew R. Rosenberger,
Hsun-Jen Chuang,
Madeleine Phillips,
Vladimir P. Oleshko,
Kathleen M. McCreary,
Saujan V. Sivaram,
C. Stephen Hellberg,
Berend T. Jonker
Abstract:
Van der Waals layered materials, such as transition metal dichalcogenides (TMDs), are an exciting class of materials with weak interlayer bonding which enables one to create van der Waals heterostructures (vdWH). Recent work has shown that control of the twist angle between layers can have a dramatic effect on vdWH properties. For TMD vdWH, twist angle has been treated solely through the use of ri…
▽ More
Van der Waals layered materials, such as transition metal dichalcogenides (TMDs), are an exciting class of materials with weak interlayer bonding which enables one to create van der Waals heterostructures (vdWH). Recent work has shown that control of the twist angle between layers can have a dramatic effect on vdWH properties. For TMD vdWH, twist angle has been treated solely through the use of rigid-lattice moiré patterns. No atomic reconstruction, i.e. any rearrangement of atoms within the individual layers, has been reported experimentally to date. Here we demonstrate that vdWH of MoSe2/WSe2 and MoS2/WS2 at twist angles less than 1° undergo significant atomic level reconstruction leading to discrete commensurate domains divided by narrow domain walls, rather than a smoothly varying rigid-lattice moiré pattern as has been assumed in prior work. Using conductive atomic force microscopy (CAFM), we show that the stacking orientation of the two TMD crystals has a profound impact on the atomic reconstruction, consistent with recent theoretical work on graphene/graphene and MoS2/MoS2 structures and experimental work on graphene bilayers and hBN/graphene vdWH. Transmission electron microscopy (TEM) provides additional evidence of atomic reconstruction in MoSe2/WSe2 structures and demonstrates the transition between a rigid-lattice moiré pattern for large angles and atomic reconstruction for small angles. We use density functional theory to calculate the band structures of the commensurate reconstructed domains and find that the modulation of the relative electronic band edges is consistent with the CAFM results and photoluminescence spectra from reconstructed vdWH. The presence of atomic reconstruction in TMD heterostructures and the observed impact on nanometer-scale electronic properties provides fundamental insight into the behavior of this important class of heterostructures.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
A- and B-Exciton Photoluminescence Intensity Ratio as a Measure of Sample Quality for Transition Metal Dichalcogenide Monolayers
Authors:
Kathleen M. McCreary,
Aubrey T. Hanbicki,
Saujan V. Sivaram,
Berend T. Jonker
Abstract:
The photoluminescence (PL) in monolayer transition metal dichalcogenides (TMDs) is dominated by recombination of electrons in the conduction band with holes in the spin-orbit split valence bands, and there are two distinct emission features referred to as the A-peak (ground state exciton) and B-peak (higher spin-orbit split state). The intensity ratio of these two features varies widely and severa…
▽ More
The photoluminescence (PL) in monolayer transition metal dichalcogenides (TMDs) is dominated by recombination of electrons in the conduction band with holes in the spin-orbit split valence bands, and there are two distinct emission features referred to as the A-peak (ground state exciton) and B-peak (higher spin-orbit split state). The intensity ratio of these two features varies widely and several contradictory interpretations have been reported. We analyze the room temperature PL from MoS2, MoSe2, WS2, and WSe2 monolayers and show that these variations arise from differences in the non-radiative recombination associated with defect densities. Hence, the relative intensities of the A- and B-emission features can be used to qualitatively asses the non-radiative recombination, and thus the quality of the sample. A low B/A ratio is indicative of low defect density and high sample quality. Emission from TMD monolayers is governed by unique optical selection rules which make them promising materials for valleytronic operations. We observe a notably higher valley polarization in the B-exciton relative to the A-exciton. The high polarization is a consequence of the shorter B-exciton lifetime resulting from rapid relaxation of excitons from the B-exciton to the A-exciton of the valence band.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Double Indirect Interlayer Exciton in a MoSe2/WSe2 van der Waals Heterostructure
Authors:
Aubrey T. Hanbicki,
Hsun-Jen Chuang,
Matthew R. Rosenberger,
C. Stephen Hellberg,
Saujan V. Sivaram,
Kathleen M. McCreary,
I. I. Mazin,
Berend T. Jonker
Abstract:
An emerging class of semiconductor heterostructures involves stacking discrete monolayers such as the transition metal dichalcogenides (TMDs) to form van der Waals heterostructures. In these structures, it is possible to create interlayer excitons (ILEs), spatially indirect, bound electron-hole pairs with the electron in one TMD layer and the hole in an adjacent layer. We are able to clearly resol…
▽ More
An emerging class of semiconductor heterostructures involves stacking discrete monolayers such as the transition metal dichalcogenides (TMDs) to form van der Waals heterostructures. In these structures, it is possible to create interlayer excitons (ILEs), spatially indirect, bound electron-hole pairs with the electron in one TMD layer and the hole in an adjacent layer. We are able to clearly resolve two distinct emission peaks separated by 24 meV from an ILE in a MoSe2/WSe2 heterostructure fabricated using state-of-the-art preparation techniques. These peaks have nearly equal intensity, indicating they are of common character, and have opposite circular polarizations when excited with circularly polarized light. Ab initio calculations successfully account for these observations - they show that both emission features originate from excitonic transitions that are indirect in momentum space, are split by spin-orbit coupling, and that including interlayer hybridization is essential in correctly describing the ILE transition. Although well separated in momentum space, we find that in real space the electron has significant weight in both the MoSe2 and WSe2 layers, contrary to the commonly assumed model. This is a significant consideration for understanding the static and dynamic properties of TMD heterostructures.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
