-
Measurement of secondary cosmic-ray neutrons near the geomagnetic North Pole
Authors:
Richard S. Woolf,
Laurel E. Sinclair,
Reid A. Van Brabant,
Bradley J. A. Harvey,
Bernard F. Phlips,
Anthony L. Hutcheson,
Emily G. Jackson
Abstract:
The spectrum of cosmogenic neutrons at Earth's surface covers a wide energy range, from thermal to several GeV. The flux of secondary neutrons varies with latitude, elevation, solar activity, and nearby material, including ground moisture. We report the results from a campaign to measure count rates in neutron detectors responding to three different energy ranges conducted near the geomagnetic Nor…
▽ More
The spectrum of cosmogenic neutrons at Earth's surface covers a wide energy range, from thermal to several GeV. The flux of secondary neutrons varies with latitude, elevation, solar activity, and nearby material, including ground moisture. We report the results from a campaign to measure count rates in neutron detectors responding to three different energy ranges conducted near the geomagnetic North Pole at CFS Alert, Nunavut, Canada (82.5 degrees , 62.5 degrees W; vertical geomagnetic cutoff rigidity, RC = 0 GV) in June of 2016. In November 2016, we performed a follow-on measurement campaign in southern Canada at similar RC (1.5 GV) and elevations. We conducted these measurements, at varying elevation and ground moisture content, with unmoderated and moderated 3He detectors for thermal and epithermal-to-MeV sensitivity, and with EJ-299-33 pulse shape discrimination plastic scintillator detectors for fast neutrons. Background gamma rays were monitored with NaI(Tl) detectors. Using these data sets, we compared the measured count rates to a predictive model. This is the first ever data set taken from this location on Earth. We find that for the thermal and epithermal-to-MeV neutron measurements the predictive model and data are in good agreement, except at one location on rock-covered ground near 1 km elevation. The discrepancy at that location may be attributable to ground moisture variability. Other measurements, during this campaign and prior, support the assertion that ground moisture plays a critical role in determining neutron flux.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
In-Flight Performance of the Advanced Radiation Detector for UAV Operations (ARDUO)
Authors:
Carolyn M. Chen,
Laurel E. Sinclair,
Richard Fortin,
Maurice Coyle,
Claire Samson
Abstract:
Natural Resources Canada (NRCan) is responsible for the provision of aerial radiometric surveys in the event of a radiological or nuclear emergency in Canada. Manned aerial surveys are an essential element of the planned consequence management operation, as demonstrated by the recovery work following the 2011 Tohoku earthquake and tsunami, and their effects in Fukushima, Japan. Flying lower and sl…
▽ More
Natural Resources Canada (NRCan) is responsible for the provision of aerial radiometric surveys in the event of a radiological or nuclear emergency in Canada. Manned aerial surveys are an essential element of the planned consequence management operation, as demonstrated by the recovery work following the 2011 Tohoku earthquake and tsunami, and their effects in Fukushima, Japan. Flying lower and slower than manned aircraft, an unmanned aerial vehicle (UAV) can provide improved spatial resolution. In particular, hot spot activity can be underestimated in manned survey results as the higher flight altitude and wider line spacing effectively average the hot spot over a larger area. Moreover, a UAV can enter an area which is hazardous for humans. NRCan has been investigating the inclusion of UAV-borne radiation survey spectrometers into its aerial survey response procedures. The Advanced Radiation Detector for UAV Operations (ARDUO) was developed to exploit the flight and lift capabilities available in the under 25kg class of UAVs. The detector features eight 2.8cm x 2.8cm x 5.6cm CsI(Tl) crystals in a self-shielding configuration, read out with silicon photomultipliers and digitized using miniaturized custom electronics. The ARDUO is flown on a main- and tail-rotor UAV called Responder which has a 6kg lift capacity and up to 40min. endurance. The performance of the ARDUO-Responder UAV system was characterized in both lab and outdoor trials. Outdoor trials consisted of aerial surveys over sealed point sources and over a distributed source. Results show how the directional response of the ARDUO can provide an indication in real time of source location for in-flight guidance. As well, the results show how use of the directional information in post-acquisition processing can result in improved spatial resolution of radiation features for both point and distributed sources.
△ Less
Submitted 1 February, 2020;
originally announced February 2020.
-
End-user experience with the SCoTSS Compton imager and directional survey spectrometer
Authors:
Laurel E. Sinclair,
Andrew McCann,
Patrick R. B. Saull,
Rodger L. Mantifel,
Christian V. O. Ouellet,
Pierre-Luc Drouin,
Audrey M. L. Macleod,
Brian Le Gros,
Ian Summerell,
Jens H. Hovgaard,
Stephen Monkhouse,
Flaviu Stanescu,
Guy Jonkmans,
Nathan Murtha
Abstract:
The Silicon photomultiplier-based Compton Telescope for Safety and Security (SCoTSS) has been developed incorporating end-user requirements into the design process. The end-user group includes those responsible for mobile survey in the event of a radiological or nuclear accident, those responsible for radiation survey support to security operations at major events and at Canadian borders, as well…
▽ More
The Silicon photomultiplier-based Compton Telescope for Safety and Security (SCoTSS) has been developed incorporating end-user requirements into the design process. The end-user group includes those responsible for mobile survey in the event of a radiological or nuclear accident, those responsible for radiation survey support to security operations at major events and at Canadian borders, as well as some of those responsible for Canadian defense applications. The SCoTSS development program has reached a technology readiness level of eight, and we are proceeding with field trials of the instrument in high-fidelity operational environments. Prospective end users have been involved in trial set up and execution, assuring applicability in their mission spaces. SCoTSS has been subject to trials involving hidden sources, heavily shielded sources, imager moving with respect to source, and complicated man-made surroundings. Our operators value high sensitivity for anomaly geolocation and map**. End users also require an instrument which is capable of direction reconstruction in motion, as well as rapid imaging of a field of view. We have developed a "time to image" measure which allows for quantitative comparison of imagers of fundamentally different technology, where one design may have an advantage in terms of energy resolution and compactness and another design may have an advantage in terms of efficiency and cost effectiveness. We present here the performance of the SCoTSS imager in rapid direction finding. As well, we compare the time to image quantity for the SCoTSS imager and the H3D Polaris-H Quad imager where the data were taken under equivalent conditions. This quantitative measure of imaging performance can allow operators to make an informed choice of the design that meets their needs taking into consideration also weight and size as well as budgetary constraints.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Spatial Deconvolution of Aerial Radiometric Survey and its application to the Fallout from a Radiological Dispersal Device
Authors:
Laurel E. Sinclair,
Richard Fortin
Abstract:
Map** radioactive contamination using aerial survey measurements is an area under active investigation today. The radiometric aerial survey technique has been extensively applied following reactor accidents and also would provide a key tool for response to a malicious radiological or nuclear incident. Methods exist to calibrate the aerial survey system for quantification of the concentration of…
▽ More
Map** radioactive contamination using aerial survey measurements is an area under active investigation today. The radiometric aerial survey technique has been extensively applied following reactor accidents and also would provide a key tool for response to a malicious radiological or nuclear incident. Methods exist to calibrate the aerial survey system for quantification of the concentration of natural radionuclides, which can provide guidance. However, these methods have anticipated a spatial distribution of the source which is large in comparison to the survey altitude. In rapid emergency-response aerial surveys of areas of safety concern, deposits of relatively small spatial extent may be expected. The activity of such spatially restricted hot spots is underestimated using the traditional methods. We present here a spatial deconvolution method which can recover some of the variation smoothed out by the averaging due to survey at altitude. We show that the method can recover the true spatial distribution of concentration of a synthetic source. We then apply the method to real aerial survey data collected following detonation of a radiological dispersal device. The findings and implications of the deconvolution are then discussed by reference to a groundbased truckborne survey over the same contamination.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Which is better, a SCoTSS gamma imager, or an ARDUO UAV-borne directional detector?
Authors:
Andrew McCann,
Laurel E. Sinclair,
Patrick R. B. Saull,
Christian Van Ouellet,
Richard Fortin,
Carolyn Chen,
Maurice J. Coyle,
Rodger Mantifel,
Audrey M. L. MacLeod,
Reid A. Van Brabant,
John Buckle,
Pierre-Luc Drouin,
Jens Hovgaard,
Bohdan Krupskyy,
Blake Beckman,
Blaine Fairbrother
Abstract:
The SiPM-based Compton Telescope for Safety and Security (SCoTSS) has been developed with inorganic crystalline scintillator material for gamma detection. The instrument is sensitive enough to be used in a mobile survey mode, accumulating energy deposited in any crystal second-by-second and tagging these spectra with GPS position. The SCoTSS imager of course has the additional advantage of being a…
▽ More
The SiPM-based Compton Telescope for Safety and Security (SCoTSS) has been developed with inorganic crystalline scintillator material for gamma detection. The instrument is sensitive enough to be used in a mobile survey mode, accumulating energy deposited in any crystal second-by-second and tagging these spectra with GPS position. The SCoTSS imager of course has the additional advantage of being able to produce an image of the radioactive objects in its field of view using events that satisfy a coincidence trigger between the scatter and absorber layers. The Advanced Radiation Detector for UAV Operations (ARDUO) on the other hand, is a non-imaging directional detector intended for use aboard a small unmanned aerial vehicle (UAV). The ARDUO detector features exactly the same volume of CsI(Tl) as is used in the absorber layer of a single SCoTSS module, giving it similar detection and alarming sensitivity, and map-making capability. However, in the ARDUO detector, the crystals are arranged closely together to optimize direction determination from self-shielding effects. Flown in a grid pattern with a UAV over an area of extended contamination, the ARDUO detector is also capable of making a map or image of that area. With its close-packed crystal arrangement, the ARDUO detector makes a poor Compton imager but does have some ability to produce a peripheral image in a fly-by. In this presentation we investigate the relative merits of Compton imaging versus mobile directional detection.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Silicon photomultiplier-based Compton Telescope for Safety and Security (SCoTSS)
Authors:
Laurel E. Sinclair,
Patrick R. B. Saull,
David S. Hanna,
Henry C. J. Seywerd,
Audrey M. L. MacLeod,
Patrick J. Boyle
Abstract:
A Compton gamma imager has been developed for use in consequence management operations and in security investigations. The imager uses solid inorganic scintillator, known for robust performance in field survey conditions. The design was constrained in overall size by the requirement that it be person transportable and operable from a variety of platforms. In order to introduce minimal dead materia…
▽ More
A Compton gamma imager has been developed for use in consequence management operations and in security investigations. The imager uses solid inorganic scintillator, known for robust performance in field survey conditions. The design was constrained in overall size by the requirement that it be person transportable and operable from a variety of platforms. In order to introduce minimal dead material in the path of the incoming and scattered gamma rays, custom silicon photomultipliers (SiPMs), with a thin glass substrate, were used to collect the scintillation light from the scatter layers. To move them out of the path of the gamma rays, preamplification electronics for the silicon photomultipliers were located a distance from the imager. This imager, the Silicon photomultiplier Compton Telescope for Safety and Security (SCoTSS) is able to provide a one-degree image resolution in a plus-minus 45 degree field of view for a 10 mCi point source 40 m distant, within about one minute, for gamma-ray energies ranging from 344 keV to 1274 keV. Here, we present a comprehensive performance study of the SCoTSS imager.
△ Less
Submitted 8 January, 2016;
originally announced January 2016.
-
Development of a Compton imager based on bars of scintillator
Authors:
A. M. L. MacLeod,
P. J. Boyle,
D. S. Hanna,
P. R. B. Saull,
L. E. Sinclair,
H. C. J. Seywerd
Abstract:
We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV…
▽ More
We have developed a compact Compton gamma-ray imager with a large field of view and a low channel-count that is capable of quickly localizing gamma-ray sources in the few hundred keV - several MeV range. The two detector planes (scatter and absorber) employ bars of NaI(Tl) read out by photomultiplier tubes (PMTs) located at each end. The long-range imaging performance has been tested from 392 keV to 1274 keV. An angular resolution measure of 2.72 +/- 0.06 degrees and an efficiency of (1.79 +/- 0.04) x 10^(-3) at 662 keV is obtained. A Cs-137 (662 keV) source equivalent to a 10 mCi source 40 m away can be located in 60 seconds with an uncertainty of about a degree. No significant degradation in imaging performance is observed for source angles up to 40 degrees off axis.
△ Less
Submitted 16 June, 2015;
originally announced June 2015.
-
First demonstration of a Compton gamma imager based on silicon photomultipliers
Authors:
P. R. B. Saull,
L. E. Sinclair,
H. C. J. Seywerd,
D. S. Hanna,
P. J. Boyle,
A. M. L. MacLeod
Abstract:
We are develo** a rugged and person-transportable Compton gamma imager for use in security investigations of radioactive materials, and for radiological incident remediation. The imager is composed of layers of scintillator with light collection for the forward layers provided by silicon photomultipliers and for the rear layer by photomultiplier tubes. As a first step, we have developed a 1/5th-…
▽ More
We are develo** a rugged and person-transportable Compton gamma imager for use in security investigations of radioactive materials, and for radiological incident remediation. The imager is composed of layers of scintillator with light collection for the forward layers provided by silicon photomultipliers and for the rear layer by photomultiplier tubes. As a first step, we have developed a 1/5th-scale demonstration unit of the final imager. We present the imaging performance of this demonstration unit for Cs-137 at angles of up to 30 degrees off-axis. Results are also presented for Sn-113 and Na-22. This represents the first demonstration of the use of silicon photomultipliers as an embedded component for light collection in a Compton gamma imager.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
-
Aerial Measurement of Radioxenon Concentration off the West Coast of Vancouver Island following the Fukushima Reactor Accident
Authors:
L. E. Sinclair,
H. C. J. Seywerd,
R. Fortin,
J. M. Carson,
P. R. B. Saull,
M. J. Coyle,
R. A. Van Brabant,
J. L. Buckle,
S. M. Desjardins,
R. M. Hall
Abstract:
In response to the Fukushima nuclear reactor accident, on March 20th, 2011, Natural Resources Canada conducted aerial radiation surveys over water just off of the west coast of Vancouver Island. Dose-rate levels were found to be consistent with background radiation, however a clear signal due to Xe-133 was observed. Methods to extract Xe-133 count rates from the measured spectra, and to determine…
▽ More
In response to the Fukushima nuclear reactor accident, on March 20th, 2011, Natural Resources Canada conducted aerial radiation surveys over water just off of the west coast of Vancouver Island. Dose-rate levels were found to be consistent with background radiation, however a clear signal due to Xe-133 was observed. Methods to extract Xe-133 count rates from the measured spectra, and to determine the corresponding Xe-133 volumetric concentration, were developed. The measurements indicate that Xe-133 concentrations on average lie in the range of 30 to 70 Bq/m3.
△ Less
Submitted 20 June, 2011;
originally announced June 2011.
-
Simulations of a Scintillator Compton Gamma Imager for Safety and Security
Authors:
L. E. Sinclair,
D. S. Hanna,
A. M. L. MacLeod,
P. R. B. Saull
Abstract:
We are designing an all-scintillator Compton gamma imager for use in security investigations and remediation actions involving radioactive threat material. To satisfy requirements for a rugged and portable instrument, we have chosen solid scintillator for the active volumes of both the scatter and absorber detectors. Using the BEAMnrc/EGSnrc Monte Carlo simulation package, we have constructed mo…
▽ More
We are designing an all-scintillator Compton gamma imager for use in security investigations and remediation actions involving radioactive threat material. To satisfy requirements for a rugged and portable instrument, we have chosen solid scintillator for the active volumes of both the scatter and absorber detectors. Using the BEAMnrc/EGSnrc Monte Carlo simulation package, we have constructed models using four different materials for the scatter detector: LaBr_3, NaI, CaF_2 and PVT. We have compared the detector performances using angular resolution, efficiency, and image resolution. We find that while PVT provides worse performance than that of the detectors based entirely on inorganic scintillators, all of the materials investigated for the scatter detector have the potential to provide performance adequate for our purposes.
△ Less
Submitted 28 June, 2009; v1 submitted 24 September, 2008;
originally announced September 2008.
-
Jets and Prompt Photons in Photoproduction at ZEUS
Authors:
L. E. Sinclair
Abstract:
In the ZEUS experiment at HERA, photoproduction processes have been studied for photon-proton centre-of-mass energies in the range 100 < W_gamma p < 300 GeV and jet transverse energies extending to E_T^jet ~ 70 GeV. The data contribute to our understanding of QCD dynamics, and also provide new constraints on the photon's parton density.
In the ZEUS experiment at HERA, photoproduction processes have been studied for photon-proton centre-of-mass energies in the range 100 < W_gamma p < 300 GeV and jet transverse energies extending to E_T^jet ~ 70 GeV. The data contribute to our understanding of QCD dynamics, and also provide new constraints on the photon's parton density.
△ Less
Submitted 27 October, 1998;
originally announced October 1998.
-
Dynamics of Multijet Processes in Photoproduction
Authors:
L. E. Sinclair
Abstract:
The cross section for producing three high transverse energy jets with a three-jet invariant mass of M_3J > 50 GeV has been measured in photoproduction at HERA. The angular distribution of the three jets is presented and found to be inconsistent with a uniform population of the available phase space. In contrast, parton shower models and O(alpha alpha_s^2) pQCD calculations are able to describe…
▽ More
The cross section for producing three high transverse energy jets with a three-jet invariant mass of M_3J > 50 GeV has been measured in photoproduction at HERA. The angular distribution of the three jets is presented and found to be inconsistent with a uniform population of the available phase space. In contrast, parton shower models and O(alpha alpha_s^2) pQCD calculations are able to describe the three jet dynamics.
△ Less
Submitted 13 May, 1998;
originally announced May 1998.
-
Recent Results from the study of QCD and Jets at HERA
Authors:
Laurel E. Sinclair
Abstract:
The HERA experiments H1 and ZEUS have recently presented a number of interesting results from studies of the hadronic final state produced in $ep$ collisions. These studies have focussed on deep inelastic scattering events and on the photoproduction of jets, and also on the comparison of the final states produced in these two regimes. Some of these results are reviewed here.
The HERA experiments H1 and ZEUS have recently presented a number of interesting results from studies of the hadronic final state produced in $ep$ collisions. These studies have focussed on deep inelastic scattering events and on the photoproduction of jets, and also on the comparison of the final states produced in these two regimes. Some of these results are reviewed here.
△ Less
Submitted 24 June, 1997;
originally announced June 1997.
-
Rapidity Gaps Between Jets
Authors:
J. M. Butterworth,
M. E. Hayes,
M. H. Seymour,
L. E. Sinclair
Abstract:
An excess of events with a rapidity gap between jets, over what would be expected from non-diffractive processes, has been observed at HERA. A process based on a perturbative QCD calculation of colour singlet exchange has been added to HERWIG. With this addition, HERWIG is able to describe the number of events with a gap between jets over the number without a gap. This gap fraction is predicted…
▽ More
An excess of events with a rapidity gap between jets, over what would be expected from non-diffractive processes, has been observed at HERA. A process based on a perturbative QCD calculation of colour singlet exchange has been added to HERWIG. With this addition, HERWIG is able to describe the number of events with a gap between jets over the number without a gap. This gap fraction is predicted to rise at large rapidity intervals between jets which would only be visible if the detector coverage were increased.
△ Less
Submitted 2 September, 1996;
originally announced September 1996.
-
Rapidity Gaps in Hard Photoproduction
Authors:
L. E. Sinclair
Abstract:
Recent results obtained from studies of diffractive processes in hard photoproduction performed by the ZEUS collaboration using data delivered by HERA in 1993 and 1994 are presented. In particular, we have found that $(7 \pm 3)$\% of events with two jets at a pseudorapidity interval of 3.5 to 4 are inconsistent with a non-diffractive production mechanism. These events may be interpreted as arisi…
▽ More
Recent results obtained from studies of diffractive processes in hard photoproduction performed by the ZEUS collaboration using data delivered by HERA in 1993 and 1994 are presented. In particular, we have found that $(7 \pm 3)$\% of events with two jets at a pseudorapidity interval of 3.5 to 4 are inconsistent with a non-diffractive production mechanism. These events may be interpreted as arising due to the exchange of a colour singlet object of negative squared invariant mass ($-t$) around 40~GeV$^2$. We have also probed the structure of the exchanged colour singlet object in low--$t$ diffractive scattering. By comparing the results from photoproduction and electroproduction processes we find that between 30\% and 80\% of the momentum of the exchanged colour singlet object which is carried by partons is due to hard gluons.
△ Less
Submitted 18 June, 1996;
originally announced June 1996.
-
Hard Photoproduction by Colour Singlet Exchange at HERA
Authors:
L. E. Sinclair
Abstract:
A search for photoproduction events which contain a rapidity gap between the two highest transverse energy jets has been conducted at HERA using the ZEUS detector. The jets have transverse energies greater than 6~GeV, and are separated by pseudorapidity intervals of up to four units. The fraction of events containing a gap is measured as a function of the gap-width. It is expected that this gap-…
▽ More
A search for photoproduction events which contain a rapidity gap between the two highest transverse energy jets has been conducted at HERA using the ZEUS detector. The jets have transverse energies greater than 6~GeV, and are separated by pseudorapidity intervals of up to four units. The fraction of events containing a gap is measured as a function of the gap-width. It is expected that this gap-fraction will fall exponentially with the gap-width, until the dominant gap-production mechanism becomes colour singlet exchange, at which point it will plateau. An indication of a plateau in the measured gap-fraction has been found, at a higher level than that expected from electroweak exchange.
△ Less
Submitted 9 September, 1995;
originally announced September 1995.
