Showing 1–7 of 7 results for author: Simonsen, H

Ultra-large bandwidth hollow-core guiding in all-silica Bragg fibers with nano-supports

Authors: G. Vienne, Y. Xu, C. Jakobsen, H. -J. Deyerl, J. B. Jensen, T. Sorensen, T. P. Hansen, Y. Huang, M. Terrel, R. K. Lee, N. A. Mortensen, J. Broeng, H. Simonsen, A. Bjarklev, A. Yariv

Abstract: We demonstrate a new class of hollow-core Bragg fibers that are composed of concentric cylindrical silica rings separated by nanoscale support bridges. We theoretically predict and experimentally observe hollow-core confinement over an octave frequency range. The bandwidth of bandgap guiding in this new class of Bragg fibers exceeds that of other hollow-core fibers reported in the literature. Wi… ▽ More We demonstrate a new class of hollow-core Bragg fibers that are composed of concentric cylindrical silica rings separated by nanoscale support bridges. We theoretically predict and experimentally observe hollow-core confinement over an octave frequency range. The bandwidth of bandgap guiding in this new class of Bragg fibers exceeds that of other hollow-core fibers reported in the literature. With only three rings of silica cladding layers, these Bragg fibers achieve propagation loss of the order of 1 dB/m. △ Less

Submitted 20 July, 2004; originally announced July 2004.

Comments: 9 pages including 5 figures

Journal ref: Opt. Express 12, 3500 (2004).

Low-loss photonic crystal fibers for transmission systems and their dispersion properties

Authors: M. D. Nielsen, C. Jacobsen, N. A. Mortensen, J. R. Folkenberg, H. R. Simonsen

Abstract: We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared silica and at the same time the largest effective area for a low-loss (< 1 dB/km) PCF. We briefly discuss the future applications of PCFs for data transmission a… ▽ More We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared silica and at the same time the largest effective area for a low-loss (< 1 dB/km) PCF. We briefly discuss the future applications of PCFs for data transmission and show for the first time, both numerically and experimentally, how the group velocity dispersion is related to the mode field diameter △ Less

Submitted 26 March, 2004; originally announced March 2004.

Comments: 5 pages including 3 figures + 1 table. Accepted for Opt. Express

Journal ref: Opt. Express 12, 1372 (2004).

Polarization maintaining large mode area photonic crystal fiber

Authors: J. R. Folkenberg, M. D. Nielsen, N. A. Mortensen, C. Jakobsen, H. R. Simonsen

Abstract: We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength and have a practically constant birefringence for any wavelength. The fibers presented in this work ha… ▽ More We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength and have a practically constant birefringence for any wavelength. The fibers presented in this work have mode field diameters from about 4 to 6.5 micron, and exhibit a typical birefringence of 1.5e-4. △ Less

Submitted 5 March, 2004; originally announced March 2004.

Comments: 5 pages including 5 figures. Accepted for Optics Express

Journal ref: Opt. Express 12, 956 (2004).

Photonic crystal fiber with a hybrid honeycomb cladding

Authors: N. A. Mortensen, M. D. Nielsen, J. R. Folkenberg, C. Jakobsen, H. R. Simonsen

Abstract: We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-do**… ▽ More We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-do** of the honeycomb lattice has recently been suggested for the formation of a photonic band-gap guiding silica-core and here we experimentally demonstrate how an index-guiding silica-core can be formed by fluorine-do** of the honeycomb lattice. △ Less

Submitted 29 January, 2004; originally announced January 2004.

Comments: 5 pages including 3 figures. Accepted for Optics Express

Journal ref: Opt. Express 12, 468 (2004).

Multi-mode photonic crystal fibers for VCSEL based data transmission

Authors: N. A. Mortensen, M. Stach, J. Broeng, A. Petersson, H. R. Simonsen, R. Michalzik

Abstract: Quasi error-free 10 Gbit/s data transmission is demonstrated over a novel type of 50 micron core diameter photonic crystal fiber with as much as 100 m length. Combined with 850$ nm VCSEL sources, this fiber is an attractive alternative to graded-index multi-mode fibers for datacom applications. A comparison to numerical simulations suggests that the high bit-rate may be partly explained by inter… ▽ More Quasi error-free 10 Gbit/s data transmission is demonstrated over a novel type of 50 micron core diameter photonic crystal fiber with as much as 100 m length. Combined with 850$ nm VCSEL sources, this fiber is an attractive alternative to graded-index multi-mode fibers for datacom applications. A comparison to numerical simulations suggests that the high bit-rate may be partly explained by inter-modal diffusion. △ Less

Submitted 25 August, 2003; originally announced August 2003.

Comments: Accepted for Optics Express

Journal ref: Opt. Express 11, 1953 (2003).

Experimental investigation of cut-off phenomena in non-linear photonic crystal fibers

Authors: J. R. Folkenberg, N. A. Mortensen, K. P. Hansen, T. P. Hansen, H. R. Simonsen, C. Jakobsen

Abstract: The modal cut-off is investigated experimentally in a series of high quality non-linear photonic crystal fibers. We demonstrate a suitable measurement technique to determine the cut-off wavelength and verify it by inspecting the near field of the modes that may be excited below and above the cut-off. We observe a double peak structure in the cut-off spectra, which is attributed to a splitting of… ▽ More The modal cut-off is investigated experimentally in a series of high quality non-linear photonic crystal fibers. We demonstrate a suitable measurement technique to determine the cut-off wavelength and verify it by inspecting the near field of the modes that may be excited below and above the cut-off. We observe a double peak structure in the cut-off spectra, which is attributed to a splitting of the higher order modes. The cut-off is measured for seven different fiber geometries with different pitches and relative hole size, and a very good agreement with recent theoretical work is found. △ Less

Submitted 2 July, 2003; originally announced July 2003.

Comments: 3 pages including 1 table and 4 figures. Accepted for Optics Letters

Journal ref: Opt. Lett. 28, 1882 (2003).

Improved large-mode area endlessly single-mode photonic crystal fibers

Authors: N. A. Mortensen, M. D. Nielsen, J. R. Folkenberg, A. Petersson, H. R. Simonsen

Abstract: We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air… ▽ More We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air hole. In a realized fiber we demonstrate an enhancement of the mode area by ~30 % without a corresponding increase in the attenuation. △ Less

Submitted 12 November, 2002; originally announced November 2002.

Comments: 3 pages including 3 eps-figures. Accepted for Optics Letters

Journal ref: Optics Letters 28, 393 (2003).