-
Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe
Authors:
Alexandra B. Artusio-Glimpse,
David A. Long,
Sean M. Bresler,
Nikunjkumar Prajapati,
Dangka Shylla,
Andrew P. Rotunno,
Matthew T. Simons,
Samuel Berweger,
Noah Schlossberger,
Thomas W. LeBrun,
Christopher L. Holloway
Abstract:
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Independent Rydberg Atom Sensing using a Dual-Ladder Scheme
Authors:
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Nikunjkumar Prajapati,
Andrew P. Rotunno,
Noah Schlossberger,
Dangka Shylla,
Kaitlin R. Moore,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schem…
▽ More
Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry
Authors:
Nikunjkumar Prajapati,
Samuel Berweger,
Andrew P. Rotunno,
Alexandra B. Artusio-Glimpse,
Noah Schlossberger,
Dangka Shylla,
William J. Watterson,
Matthew T. Simons,
David LaMantia,
Eric B. Norrgard,
Stephen P. Eckel,
Christopher L. Holloway
Abstract:
We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium syst…
▽ More
We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment
Authors:
Noah Schlossberger,
Andrew P. Rotunno,
Aly Artusio-Glimpse,
Nikunjkumar Prajapati,
Samuel Berweger,
Dangka Shylla,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic fie…
▽ More
Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light.
△ Less
Submitted 27 November, 2023; v1 submitted 13 November, 2023;
originally announced November 2023.
-
High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band
Authors:
Nikunjkumar Prajapati,
Jakob W. Kunzler,
Alexandra B. Artusio-Glimpse,
Andrew Rotunno,
Samuel Berweger,
Matthew T. Simons,
Christopher L. Holloway,
Chad M. Gardner,
Michael S. Mcbeth,
Robert A. Younts
Abstract:
Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification…
▽ More
Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields
Authors:
Maitreyi Jayaseelan,
Andrew P. Rotunno,
Nikunjkumar Prajapati,
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fi…
▽ More
We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations
Authors:
Andrew P. Rotunno,
Amy K. Robinson,
Nikunjkumar Prajapati,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway
Abstract:
We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss e…
▽ More
We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms
Authors:
Andrew P. Rotunno,
Samuel Berweger,
Nikunjkumar Prajapati,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway,
Maitreyi Jayaseelan,
Robert M. Potvliege,
C. S. Adams
Abstract:
Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF fie…
▽ More
Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range.
△ Less
Submitted 21 April, 2023; v1 submitted 6 December, 2022;
originally announced December 2022.
-
Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry
Authors:
Samuel Berweger,
Alexandra B. Artusio-Glimpse,
Andrew P. Rotunno,
Nikunjkumar Prajapati,
Joseph D. Christesen,
Kaitlin R. Moore,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydbe…
▽ More
Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations.
△ Less
Submitted 28 July, 2023; v1 submitted 30 November, 2022;
originally announced December 2022.
-
Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry
Authors:
Nikunjkumar Prajapati,
Narayan Bhusal,
Andrew P. Rotunno,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Ying Ju Wang,
Eric Bottomley,
Haoquan Fan,
Christopher L. Holloway
Abstract:
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r…
▽ More
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement.
△ Less
Submitted 23 November, 2022; v1 submitted 21 November, 2022;
originally announced November 2022.
-
Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing
Authors:
Samuel Berweger,
Nikunjkumar Prajapati,
Alexandra B. Artusio-Glimpse,
Andrew P. Rotunno,
Roger Brown,
Christopher L. Holloway,
Matthew T. Simons,
Eric Imhof,
Steven R. Jefferts,
Baran N. Kayim,
Michael A. Viray,
Robert Wyllie,
Brian C. Sawyer,
Thad G. Walker
Abstract:
On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing.…
▽ More
On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements
Authors:
Christopher L. Holloway,
Nikunjkumar Prajapati,
John Kitching,
Jeffery A. Sherman,
Carson Teale,
Alain Rufenacht,
Alexandra B. Artusio-Glimpse,
Matthew T. Simons,
Amy K. Robinson,
Eric B. Norrgard
Abstract:
We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow…
▽ More
We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user.
△ Less
Submitted 22 October, 2021; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repum**
Authors:
Nikunjkumar Prajapati,
Amy K. Robinson,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway
Abstract:
We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly doubl…
▽ More
We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repum** field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning
Authors:
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Christopher L. Holloway,
Eric Imhof,
Steven R. Jefferts,
Robert Wyllie,
Brian C. Sawyer,
Thad G Walker
Abstract:
We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydber…
▽ More
We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Determining the Angle-of-Arrival of an Radio-Frequency Source with a Rydberg Atom-Based Sensor
Authors:
Amy K. Robinson,
Nikunjkumar Prajapati,
Damir Senic,
Matthew T. Simons,
Joshua A. Gordon,
Christopher L. Holloway
Abstract:
In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside…
▽ More
In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements to both full-wave simulation and to a plane-wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle-of-arrival of an RF field.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Atomic Spectra in a Six-Level Scheme for Electromagnetically Induced Transparency and Autler-Townes Splitting in Rydberg Atoms
Authors:
Amy K. Robinson,
Alexandra Artusio-Glimpse,
Matthew T. Simons,
Christopher L. Holloway
Abstract:
We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters.…
▽ More
We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters. We also present two theoretical models for this atomic system, where these two models capture different aspects of the observed spectra. One is a six-level model used to predict dominant spectral features and the other a more complex eight-level model used to predict the full characteristics of this system. Both models shows very good agreement with the experimental data.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Quantum Physics Meets Music: A "Real-Time" Guitar Recording Using Rydberg-Atoms and Electromagnetically Induced Transparency
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Abdulaziz H. Haddab,
Carl J. Williams,
Maxwell W. Holloway
Abstract:
We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recordi…
▽ More
We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recording of each guitar separately. The approach shows how audio data (the musical composition) can be detected with a quantum system, illustrating how we can control ensembles of atoms to such an extent that we can use them in this "entertaining" example of recording a musical instrument.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Detecting and Receiving Phase Modulated Signals with a Rydberg Atom-Based Mixer
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Joshua A. Gordon,
David Novotny
Abstract:
Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of…
▽ More
Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of digital modulated signals based on various phase-shift keying approaches. We demonstrate Rydberg atom-based digital reception of binary phase-shift keying (BPSK), quadrature phase-shift keying (QPSK), and quadrature amplitude (QAM) modulated signals over a 19.626~GHz carrier to transmit and receive a bit stream in cesium vapor. We present measured values of Error Vector Magnitude (EVM, a common communication metric used to assess how accurate a symbol or bit stream is received) as a function of symbol rate for BPSK, QPSK, 16QAM, 32QAM, and 64QAM modulation schemes. These results allow us to discuss the bandwidth of a Rydberg-atom based receiver system.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Weak Electric-Field Detection with Sub-1 Hz Resolution at Radio Frequencies Using A Rydberg Atom-Based Mixer
Authors:
Joshua A. Gordon,
Matthew T. Simons,
Abdulaziz H. Haddab,
Christopher L. Holloway
Abstract:
Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus…
▽ More
Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus limiting the minimum detectable E-field. Here, we demonstrate using the Rydberg atoms as an RF mixer for weak E-field detection well below the AT regime with frequency discrimination better than 1 Hz resolution. Two E-fields incident on a vapor cell filled with cesium atoms are used. One E-field at 19.626000 GHz drives the 34D_(5/2)->5P_(3/2) Rydberg transition and acts as a local oscillator (LO) and a second signal E-field (Sig) of interest is at 19.626090 GHz. In the presence of the LO, the Rydberg atoms naturally down convert the Sig field to a 90 kHz intermediate frequency (IF) signal. This IF signal manifests as an oscillation in the probe laser intensity through the Rydberg vapor and is easily detected with a photodiode and lock-in amplifier. In the configuration used here, E-field strength down to ? 46 mV/m +/-2 mV/m were detected. Furthermore, neighboring fields 0.1 Hz away and equal in strength to Sig could be discriminated without any leakage into the lock-in signal. For signals 1 Hz away and as high as +60 dB above Sig, leakage into the lock-in signal could be kept below -3 dB.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
A Multiple-Band Rydberg-Atom Based Receiver/Antenna: AM/FM Stereo Reception
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Abdulaziz H. Haddab,
Joshua A. Gordon,
Stephen D. Voran
Abstract:
With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to…
▽ More
With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to develop atom-based receivers and antennas, which potentially have many benefits over conventional technologies in detecting and receiving modulated signals. In this paper, we demonstrate the ``first'' multi-channel atom-based reception of both amplitude (AM) and frequency (FM) modulation signals. We demonstrate this by using two different atomic species in order to detect and receive AM and FM modulated signals in stereo. Also, in this paper we investigate the effect of Gaussian noise on the ability to receive AM/FM signals. These results illustrate the multi-band (or multi-channel) receiving capability of a atom-based receiver/antenna to produce high fidelity stereo reception from both AM and FM signals. This paper shows an interesting way of applying the relatively newer (and something esoteric) field of quantum-optics and atomic-physics to the century old topic of radio reception.
△ Less
Submitted 2 March, 2019;
originally announced March 2019.
-
A New Quantum-Based Power Standard: Using Rydberg Atoms for a SI-Traceable Radio-Frequency Power Measurement Technique in Rectangular Waveguides
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Marcus D. Kautz,
Abdulaziz H. Haddab,
Joshua A. Gordon,
Thomas P. Crowley
Abstract:
In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carri…
▽ More
In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carried by the wave is then related to this measured E-field, which leads to a new direct International System of Units (SI) measurement of RF power. To demonstrate this approach, we first measure the field distribution of the fundamental mode in the waveguide and then measure the power carried by the wave at both 19.629 GHz and 26.526 GHz. We obtain good agreement between the power measurements obtained with this new technique and those obtained with a conventional power meter.
△ Less
Submitted 22 June, 2018; v1 submitted 18 June, 2018;
originally announced June 2018.
-
Measurement of Radio-Frequency Radiation Pressure
Authors:
Alexandra Artusio-Glimpse,
Matt T. Simons,
Ivan Ryger,
Marc Kautz,
John Lehman,
Christopher L. Holloway
Abstract:
We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a p…
▽ More
We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a power measure traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we demonstrate the ability to measure the radiation pressure/force carried in a field at 15~GHz.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
-
Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) splitting in the Presence of Band-Limited White Gaussian Noise
Authors:
Christopher L. Holloway,
Matthew T. Simons,
Marcus D. Kautz,
David A. Anderson,
Georg Raithel,
Daniel Stack,
Marc C. St. John,
Wansheng Su
Abstract:
We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups…
▽ More
We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups around the world as a means to develop a new SI traceable RF E-field measurement technique. For this to be a useful technique, it is important to understand the influence of BLWGN. We perform EIT/AT based E-field experiments with BLWGN centered on the RF transition frequency and for the BLWGN blue-shifted and red-shifted relative to the RF transition frequency. The EIT signal can be severely distorted for certain noise conditions (band-width, center-frequency, and noise power), hence altering the ability to accurately measure a CW RF E-field strength. We present a model to predict the changes in the EIT signal in the presence of noise. This model includes AC Stark shifts and on resonance transitions associated with the noise source. The results of this model are compared to the experimental data and we find very good agreement between the two.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Simultaneous Use of Cs and Rb Rydberg Atoms for Independent RF Electric Field Measurements via Electromagnetically Induced Transparency
Authors:
Matt T. Simons,
Joshua A. Gordon,
Christopher L. Holloway
Abstract:
We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurem…
▽ More
We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurement. We show that these two systems can detect the same the RF E-field strength simultaneously, which provides a direct in situ comparison of Rb and Cs RF measurements in Rydberg atoms. In effect, this allows us to perform two independent measurements of the same quantity in the same laboratory, providing two different immediate and independent measurements. This gives two measurements that helps rule out systematic effects and uncertainties in this E-field metrology approach, which are important when establishing an international measurement standard for an E-field strength and is a necessary step for this method to be accepted as a standard calibration technique. We use this approach to measure E-fields at 9.2~GHz, 11.6~GHz, and 13.4~GHz, which correspond to three different atomic states (different principal atomic numbers and angular momentums) for the two atom species.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Effect of inhomogeneities and substrate on the dynamics of the metal-insulator transition in VO$_2$ thin films
Authors:
M. Rodriguez-Vega,
M. T. Simons,
E. Radue,
S. Kittiwatanakul,
J. Lu,
S. A. Wolf,
R. A. Lukaszew,
I. Novikova,
E. Rossi
Abstract:
We study the thermal relaxation dynamics of VO$_2$ films after the ultrafast photo-induced metal-insulator transition for two VO$_2$ film samples grown on Al$_2$O$_3$ and TiO$_2$ substrates. We find two orders of magnitude difference in the recovery time (a few ns for the VO$_2$/Al$_2$O$_3$ sample vs. hundreds of ns for the VO$_2$/TiO$_2$ sample). We present a theoretical model that accurately des…
▽ More
We study the thermal relaxation dynamics of VO$_2$ films after the ultrafast photo-induced metal-insulator transition for two VO$_2$ film samples grown on Al$_2$O$_3$ and TiO$_2$ substrates. We find two orders of magnitude difference in the recovery time (a few ns for the VO$_2$/Al$_2$O$_3$ sample vs. hundreds of ns for the VO$_2$/TiO$_2$ sample). We present a theoretical model that accurately describes the MIT thermal properties and interpret the experimental measurements. We obtain quantitative results that show how the microstructure of the VO$_2$ film and the thermal conductivity of the interface between the VO$_2$ film and the substrate affect long time-scale recovery dynamics. We also obtain a simple analytic relationship between the recovery time-scale and some of the film parameters.
△ Less
Submitted 12 September, 2015; v1 submitted 22 April, 2015;
originally announced April 2015.
-
Observation of second-order hyper-Raman generation in LiNbO3 whispering-gallery mode disk resonators
Authors:
Matt T. Simons,
Irina Novikova
Abstract:
In this manuscript we report experimental demonstration of nonlinear frequency conversion at several optical frequencies in a whispering-gallery mode resonator (WGMR). Due to the enhancement of nonlinear interactions inside a WGMR, interaction of a 1064 nm pump field with a LiNbO3 disk produced a weak, but measurable non-phase matched 532 nm second harmonic field at room temperature (>100C below t…
▽ More
In this manuscript we report experimental demonstration of nonlinear frequency conversion at several optical frequencies in a whispering-gallery mode resonator (WGMR). Due to the enhancement of nonlinear interactions inside a WGMR, interaction of a 1064 nm pump field with a LiNbO3 disk produced a weak, but measurable non-phase matched 532 nm second harmonic field at room temperature (>100C below the phase-matching temperature), for pump powers of a few tens of mW. For higher pump powers, we observed the generation of four additional fields at 545 nm, 559 nm, 573 nm, and 587 nm. The relative spectral shift between two consecutive fields corresponds to a 455 cm^-1 vibrational mode in LiNbO3 crystal. Our preliminary analysis indicates that these fields are the result of a multi-phonon hyper-Raman scattering, in which two photons of the pump field are converted into one photon of a higher-frequency field and one or several optical phonons.
△ Less
Submitted 14 July, 2011;
originally announced July 2011.