Showing 1–50 of 53 results for author: Simons, M

Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe

Authors: Alexandra B. Artusio-Glimpse, David A. Long, Sean M. Bresler, Nikunjkumar Prajapati, Dangka Shylla, Andrew P. Rotunno, Matthew T. Simons, Samuel Berweger, Noah Schlossberger, Thomas W. LeBrun, Christopher L. Holloway

Abstract: We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Independent Rydberg Atom Sensing using a Dual-Ladder Scheme

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Nikunjkumar Prajapati, Andrew P. Rotunno, Noah Schlossberger, Dangka Shylla, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schem… ▽ More Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry

Authors: Nikunjkumar Prajapati, Samuel Berweger, Andrew P. Rotunno, Alexandra B. Artusio-Glimpse, Noah Schlossberger, Dangka Shylla, William J. Watterson, Matthew T. Simons, David LaMantia, Eric B. Norrgard, Stephen P. Eckel, Christopher L. Holloway

Abstract: We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium syst… ▽ More We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 9 figure, quantum optics, rydberg electrometry

Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment

Authors: Noah Schlossberger, Andrew P. Rotunno, Aly Artusio-Glimpse, Nikunjkumar Prajapati, Samuel Berweger, Dangka Shylla, Matthew T. Simons, Christopher L. Holloway

Abstract: Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic fie… ▽ More Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light. △ Less

Submitted 27 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band

Authors: Nikunjkumar Prajapati, Jakob W. Kunzler, Alexandra B. Artusio-Glimpse, Andrew Rotunno, Samuel Berweger, Matthew T. Simons, Christopher L. Holloway, Chad M. Gardner, Michael S. Mcbeth, Robert A. Younts

Abstract: Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification… ▽ More Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 9 figure, 8 pages

EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields

Authors: Maitreyi Jayaseelan, Andrew P. Rotunno, Nikunjkumar Prajapati, Samuel Berweger, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fi… ▽ More We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations

Authors: Andrew P. Rotunno, Amy K. Robinson, Nikunjkumar Prajapati, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss e… ▽ More We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Comments: 8 pages, 7 figures. Code and data will be available with final publication

Journal ref: AIP Advances 13, 075218 (2023)

Transition moments for STEOM-CCSD with core triples

Authors: Megan Simons, Devin A. Matthews

Abstract: Similarity transformed equation-of-motion coupled cluster theory (STEOM-CC) is an alternative approach to equation-of-motion coupled cluster theory for excited states (EOMEE-CC) which uses a second similarity transformation of the Hamiltonian, followed by diagonalization in a small (CI singles-like) excitation space, even when single and double excitations are included in the transformation. In ad… ▽ More Similarity transformed equation-of-motion coupled cluster theory (STEOM-CC) is an alternative approach to equation-of-motion coupled cluster theory for excited states (EOMEE-CC) which uses a second similarity transformation of the Hamiltonian, followed by diagonalization in a small (CI singles-like) excitation space, even when single and double excitations are included in the transformation. In addition to vertical excitation energies, transition moments measure the strength of the interactions between states determining absorption, emission, and other processes. In STEOM-CCSD, transition moments are calculated in a straight-forward manner as biorthogonal expectation values using both the left- and right-hand solutions, with the main difference from EOMEE-CC being the inclusion of the transformation operator. We recently developed an extension of STEOM-CCSD to core excitations, CVS-STEOM-CCSD+cT, which includes triple excitations and the well-known core-valence separation for the core ionization potential calculations. In this work, we derived transition moments for core-excited states with core triple excitations, including both ground-to-core-excited and valence-to-core-excited transitions. The improvement of the computed transition moments of the CVS-STEOM-CCSD+cT method is compared to standard CVS-STEOMEE-CCSD and CVS-EOMEE-CCSD for our previously published small molecule benchmark set. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Open-shell Tensor Hypercontraction

Authors: Tingting Zhao, Megan Simons, Devin A. Matthews

Abstract: The extension of least-squares tensor hypercontracted second- and third-order Møller-Plessett perturbation theory (LS-THC-MP2 and LS-THC-MP3) to open-shell systems is an important development due to the scaling reduction afforded by THC and the ubiquity of molecular ions, radicals, and other open-shell reactive species. The complexity of wavefunction-based quantum chemical methods such as Møller-P… ▽ More The extension of least-squares tensor hypercontracted second- and third-order Møller-Plessett perturbation theory (LS-THC-MP2 and LS-THC-MP3) to open-shell systems is an important development due to the scaling reduction afforded by THC and the ubiquity of molecular ions, radicals, and other open-shell reactive species. The complexity of wavefunction-based quantum chemical methods such as Møller-Plessett and coupled cluster theory is reflected in the steep scaling of the computational costs with the molecular size. The least-squares tensor hypercontraction (LS-THC) method is an efficient, single-step factorization for the two-electron integral tensor, but can also be used to factorize the double excitation amplitudes, leading to significant scaling reduction. Here, we extend this promising method to open-shell variants of LS-THC-MP2 and -MP3 using diagrammatic techniques and explicit spin-summation. The accuracy of the resulting methods for open-shell species is benchmarked on standard tests systems such as regular alkanes, as well as realistic systems involving bond breaking, radical stabilization, and other effects. We find that open-shell LS-THC-MP$n$ methods exhibit errors highly comparable to those produced by closed-shell LS-THC-MP$n$, and are highly insensitive to particular chemical interactions, geometries, or even to moderate spin contamination. △ Less

Submitted 27 May, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms

Authors: Andrew P. Rotunno, Samuel Berweger, Nikunjkumar Prajapati, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Maitreyi Jayaseelan, Robert M. Potvliege, C. S. Adams

Abstract: Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF fie… ▽ More Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range. △ Less

Submitted 21 April, 2023; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: Data for figures can be found at: https://datapub.nist.gov/od/id/mds2-2852

Journal ref: J. Appl. Phys. 134, 134501 (2023)

Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Nikunjkumar Prajapati, Joseph D. Christesen, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydbe… ▽ More Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations. △ Less

Submitted 28 July, 2023; v1 submitted 30 November, 2022; originally announced December 2022.

Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry

Authors: Nikunjkumar Prajapati, Narayan Bhusal, Andrew P. Rotunno, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Ying Ju Wang, Eric Bottomley, Haoquan Fan, Christopher L. Holloway

Abstract: We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r… ▽ More We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement. △ Less

Submitted 23 November, 2022; v1 submitted 21 November, 2022; originally announced November 2022.

Comments: 9 pages, 6 figures

Moonraker -- Enceladus Multiple Flyby Mission

Authors: O. Mousis, A. Bouquet, Y. Langevin, N. André, H. Boithias, G. Durry, F. Faye, P. Hartogh, J. Helbert, L. Iess, S. Kempf, A. Masters, F. Postberg, J. -B. Renard, P. Vernazza, A. Vorburger, P. Wurz, D. H. Atkinson, S. Barabash, M. Berthomier, J. Brucato, M. Cable, J. Carter, S. Cazaux, A. Coustenis , et al. (28 additional authors not shown)

Abstract: Enceladus, an icy moon of Saturn, possesses an internal water ocean and jets expelling ocean material into space. Cassini investigations indicated that the subsurface ocean could be a habitable environment having a complex interaction with the rocky core. Further investigation of the composition of the plume formed by the jets is necessary to fully understand the ocean, its potential habitability,… ▽ More Enceladus, an icy moon of Saturn, possesses an internal water ocean and jets expelling ocean material into space. Cassini investigations indicated that the subsurface ocean could be a habitable environment having a complex interaction with the rocky core. Further investigation of the composition of the plume formed by the jets is necessary to fully understand the ocean, its potential habitability, and what it tells us about Enceladus' origin. Moonraker has been proposed as an ESA M-class mission designed to orbit Saturn and perform multiple flybys of Enceladus, focusing on traversals of the plume. The proposed Moonraker mission consists of an ESA-provided platform, with strong heritage from JUICE and Mars Sample Return, and carrying a suite of instruments dedicated to plume and surface analysis. The nominal Moonraker mission has a duration of 13.5 years. It includes a 23-flyby segment with 189 days allocated for the science phase, and can be expanded with additional segments if resources allow. The mission concept consists in investigating: i) the habitability conditions of present-day Enceladus and its internal ocean, ii) the mechanisms at play for the communication between the internal ocean and the surface of the South Polar Terrain, and iii) the formation conditions of the moon. Moonraker, thanks to state-of-the-art instruments representing a significant improvement over Cassini's payload, would quantify the abundance of key species in the plume, isotopic ratios, and physical parameters of the plume and the surface. Such a mission would pave the way for a possible future landed mission. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Comments: Accepted for publication in The Planetary Science Journal

Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing

Authors: Samuel Berweger, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Roger Brown, Christopher L. Holloway, Matthew T. Simons, Eric Imhof, Steven R. Jefferts, Baran N. Kayim, Michael A. Viray, Robert Wyllie, Brian C. Sawyer, Thad G. Walker

Abstract: On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing.… ▽ More On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Modeling Line Broadening and Distortion Due to Spatially Non-Uniform Fields in Rydberg Electrometry

Authors: Andrew P. Rotunno, Amy K. Robinson, Samuel Berweger, Nukunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Matthew Simons, Christopher L. Holloway

Abstract: We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The method… ▽ More We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The methodology can be easily applied to other non-uniform optical parameters when monitoring total spectral transmission or phase delay. Field non-uniformity is present in standing waves of unmatched waveguides and glass vapor cells, which are generally due to source characteristics and environmental reflections. We present broadening and distortion effects caused by various types of electric-field distributions, and compare this model to results obtained from measured atomic spectra. △ Less

Submitted 15 August, 2022; originally announced August 2022.

Comments: 8 pages, 6 figures

Journal ref: J. Appl. Phys. 134, 084401 (2023)

TV and Video Game Streaming with a Quantum Receiver: A Study on a Rydberg atom-based receivers bandwidth and reception clarity

Authors: Nikunjkumar Prajapati, Andrew Rotunno, Samuel Berweger, Matt Simons, Aly Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average t… ▽ More We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average time the atoms remain in the interaction volume, which is inversely proportional to the bandwidth of the receiver. We find that small beam diameters (less than 100 μm) lead to much faster responses and allow for color reception. We demonstrate the effect of beam size on bandwidth by receiving a live 480i video stream with the Rydberg atom receiver. The best fidelity was achieved with a beam width of 85 μm full-width at half-max. △ Less

Submitted 11 May, 2022; v1 submitted 5 May, 2022; originally announced May 2022.

Comments: 6 pages, 7 figures

Transition-Potential Coupled Cluster II: Optimization of the Core Orbital Occupation Number

Authors: Megan Simons, Devin A. Matthews

Abstract: The issue of orbital relaxation in computational core-hole spectroscopy, specifically x-ray absorption, has been a major problem for methods such as equation-of-motion coupled cluster with singles and doubles (EOM-CCSD). The transition-potential coupled cluster (TP-CC) method is utilized to address this problem by including an explicit treatment of orbital relaxation via the use of reference orbit… ▽ More The issue of orbital relaxation in computational core-hole spectroscopy, specifically x-ray absorption, has been a major problem for methods such as equation-of-motion coupled cluster with singles and doubles (EOM-CCSD). The transition-potential coupled cluster (TP-CC) method is utilized to address this problem by including an explicit treatment of orbital relaxation via the use of reference orbitals with a fractional core occupation number. The value of the fractional occupation parameter $λ$ was optimized for both TP-CCSD and XTP-CCSD methods in an element-specific manner due to the differences in atomic charge and energy scale. Additionally, TP-CCSD calculations using the optimized parameters were performed for the K-edge absorption spectra of gas-phase adenine and thymine. TP-CCSD reproduces the valence region well and requires smaller overall energy shifts in comparison to EOM-CCSD, while also improving on the relative position and intensities of several absorption peaks. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Accurate core-excited states via inclusion of core triple excitations in similarity-transformed EOM theory

Authors: Megan Simons, Devin A. Matthews

Abstract: The phenomenon of orbital relaxation upon excitation of core electrons is a major problem in the linear-response treatment of core-hole spectroscopies. Rather than addressing relaxation through direct dynamical correlation of the excited state via equation-of-motion coupled cluster theory (EOMEE-CC), we extend the alternative similarity-transformed equation-of-motion coupled cluster theory (STEOME… ▽ More The phenomenon of orbital relaxation upon excitation of core electrons is a major problem in the linear-response treatment of core-hole spectroscopies. Rather than addressing relaxation through direct dynamical correlation of the excited state via equation-of-motion coupled cluster theory (EOMEE-CC), we extend the alternative similarity-transformed equation-of-motion coupled cluster theory (STEOMEE-CC) by including the core-valence separation (CVS) and correlation of triple excitations only within the calculation of core ionization energies. This new method, CVS-STEOMEE-CCSD+cT, significantly improves on CVS-EOMEE-CCSD and unmodified CVS-STEOMEE-CCSD when compared to full CVS-EOM-CCSDT for K-edge core-excitation energies of a set of small molecules. The improvement in both absolute and relative (shifted) peak positions is nearly as good as for transition-potential coupled cluster (TP-CC), which includes an explicit treatment of orbital relaxation, and CVS-EOMEE-CCSD*, which includes a perturbative treatment of triple excitations. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Surface astrochemistry: a computational chemistry perspective

Authors: H. M. Cuppen, A. Fredon, T. Lamberts, E. M. Penteado, M. Simons, C. Walsh

Abstract: Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. Especially, saturated, hydrogen-rich molecules are formed through surface chemistry. Astrochemical models have developed over the decades to understand the molecular processes in the interstellar medium, taking into account grain surface chemist… ▽ More Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. Especially, saturated, hydrogen-rich molecules are formed through surface chemistry. Astrochemical models have developed over the decades to understand the molecular processes in the interstellar medium, taking into account grain surface chemistry. However, essential input information for gas-grain models, such as binding energies of molecules to the surface, have been derived experimentally only for a handful of species, leaving hundreds of species with highly uncertain estimates. Moreover, some fundamental processes are not well enough constrained to implement these into the models. The proceedings gives three examples how computational chemistry techniques can help answer fundamental questions regarding grain surface chemistry. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Comments: (12 pages, 8 figures)

Journal ref: Astrochemistry VII -- Through the Cosmos from Galaxies to Planets", proceedings of the IAU Symposium No. 332, 2017, Puerto Varas, Chile; eds. M. Cunningham, T. Millar and Y. Aikawa,p 293 - 304

Methoxymethanol Formation Starting from CO-Hydrogenation

Authors: Jiao He, Mart Simons, Gleb Fedoseev, Ko-Ju Chuang, Danna Qasim, Thanja Lamberts, Sergio Ioppolo, Brett A. McGuire, Herma Cuppen, Harold Linnartz

Abstract: Methoxymethanol (CH3OCH2OH, MM) has been identified through gas-phase signatures in both high- and low-mass star-forming regions. This molecule is expected to form upon hydrogen addition and abstraction reactions in CO-rich ice through radical recombination of CO hydrogenation products. The goal of this work is to investigate experimentally and theoretically the most likely solid-state MM reaction… ▽ More Methoxymethanol (CH3OCH2OH, MM) has been identified through gas-phase signatures in both high- and low-mass star-forming regions. This molecule is expected to form upon hydrogen addition and abstraction reactions in CO-rich ice through radical recombination of CO hydrogenation products. The goal of this work is to investigate experimentally and theoretically the most likely solid-state MM reaction channel -- the recombination of CH2OH and CH3O radicals -- for dark interstellar cloud conditions and to compare the formation efficiency with that of other species that were shown to form along the CO-hydrogenation line. Hydrogen atoms and CO or H2CO molecules are co-deposited on top of the predeposited H2O ice to mimic the conditions associated with the beginning of 'rapid' CO freeze-out. Quadrupole mass spectrometry is used to analyze the gas-phase COM composition following a temperature programmed desorption. Monte Carlo simulations are used for an astrochemical model comparing the MM formation efficiency with that of other COMs. Unambiguous detection of newly formed MM has been possible both in CO+H and H2CO+H experiments. The resulting abundance of MM with respect to CH3OH is about 0.05, which is about 6 times less than the value observed toward NGC 6334I and about 3 times less than the value reported for IRAS 16293B. The results of astrochemical simulations predict a similar value for the MM abundance with respect to CH3OH factors ranging between 0.06 to 0.03. We find that MM is formed by co-deposition of CO and H2CO with H atoms through the recombination of CH2OH and CH3O radicals. In both the experimental and modeling studies, the efficiency of this channel alone is not sufficient to explain the observed abundance of MM. These results indicate an incomplete knowledge of the reaction network or the presence of alternative solid-state or gas-phase formation mechanisms. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Comments: 8 pages, 8 figures

Journal ref: A&A 659, A65 (2022)

Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements

Authors: Christopher L. Holloway, Nikunjkumar Prajapati, John Kitching, Jeffery A. Sherman, Carson Teale, Alain Rufenacht, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Amy K. Robinson, Eric B. Norrgard

Abstract: We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow… ▽ More We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user. △ Less

Submitted 22 October, 2021; v1 submitted 5 October, 2021; originally announced October 2021.

Comments: 13 pages, 14 figures, 3 tables

Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repum**

Authors: Nikunjkumar Prajapati, Amy K. Robinson, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly doubl… ▽ More We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repum** field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 5 pages, 6 figures

Deep Learning-based Damage Map** with InSAR Coherence Time Series

Authors: Oliver L. Stephenson, Tobias Köhne, Eric Zhan, Brent E. Cahill, Sang-Ho Yun, Zachary E. Ross, Mark Simons

Abstract: Satellite remote sensing is playing an increasing role in the rapid map** of damage after natural disasters. In particular, synthetic aperture radar (SAR) can image the Earth's surface and map damage in all weather conditions, day and night. However, current SAR damage map** methods struggle to separate damage from other changes in the Earth's surface. In this study, we propose a novel approac… ▽ More Satellite remote sensing is playing an increasing role in the rapid map** of damage after natural disasters. In particular, synthetic aperture radar (SAR) can image the Earth's surface and map damage in all weather conditions, day and night. However, current SAR damage map** methods struggle to separate damage from other changes in the Earth's surface. In this study, we propose a novel approach to damage map**, combining deep learning with the full time history of SAR observations of an impacted region in order to detect anomalous variations in the Earth's surface properties due to a natural disaster. We quantify Earth surface change using time series of Interferometric SAR coherence, then use a recurrent neural network (RNN) as a probabilistic anomaly detector on these coherence time series. The RNN is first trained on pre-event coherence time series, and then forecasts a probability distribution of the coherence between pre- and post-event SAR images. The difference between the forecast and observed co-event coherence provides a measure of the confidence in the identification of damage. The method allows the user to choose a damage detection threshold that is customized for each location, based on the local behavior of coherence through time before the event. We apply this method to calculate estimates of damage for three earthquakes using multi-year time series of Sentinel-1 SAR acquisitions. Our approach shows good agreement with observed damage and quantitative improvement compared to using pre- to co-event coherence loss as a damage proxy. △ Less

Submitted 24 May, 2021; originally announced May 2021.

Comments: 18 pages, 7 figures, plus supplementary materials

Journal ref: IEEE Transactions on Geoscience and Remote Sensing (2021)

Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning

Authors: Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Eric Imhof, Steven R. Jefferts, Robert Wyllie, Brian C. Sawyer, Thad G Walker

Abstract: We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydber… ▽ More We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: Phys. Rev. A 104, 032824 (2021)

Determining the Angle-of-Arrival of an Radio-Frequency Source with a Rydberg Atom-Based Sensor

Authors: Amy K. Robinson, Nikunjkumar Prajapati, Damir Senic, Matthew T. Simons, Joshua A. Gordon, Christopher L. Holloway

Abstract: In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside… ▽ More In this work, we demonstrate the use of a Rydberg atom-based sensor for determining the angle-of-arrival of an incident radio-frequency (RF) wave or signal. The technique uses electromagnetically induced transparency in Rydberg atomic vapor in conjunction with a heterodyne Rydberg atom-based mixer. The Rydberg atom mixer measures the phase of the incident RF wave at two different locations inside an atomic vapor cell. The phase difference at these two locations is related to the direction of arrival of the incident RF wave. To demonstrate this approach, we measure phase differences of an incident 19.18 GHz wave at two locations inside a vapor cell filled with cesium atoms for various incident angles. Comparisons of these measurements to both full-wave simulation and to a plane-wave theoretical model show that these atom-based sub-wavelength phase measurements can be used to determine the angle-of-arrival of an RF field. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 4 pages, 5 figures

Transition-Potential Coupled Cluster

Authors: Megan E. Simons, Devin A. Matthews

Abstract: The problem of orbital relaxation in computational core-hole spectroscopies, including x-ray absorption and x-ray photoionization, has long plagued linear response approaches, including equation-of-motion coupled cluster with singles and doubles (EOM-CCSD). Instead of addressing this problem by including additional electron correlation, we propose an explicit treatment of orbital relaxation via th… ▽ More The problem of orbital relaxation in computational core-hole spectroscopies, including x-ray absorption and x-ray photoionization, has long plagued linear response approaches, including equation-of-motion coupled cluster with singles and doubles (EOM-CCSD). Instead of addressing this problem by including additional electron correlation, we propose an explicit treatment of orbital relaxation via the use of "transition potential" reference orbitals, leading to a transition-potential coupled cluster (TP-CC) family of methods. One member of this family in particular, TP-CCSD(1/2), is found to essentially eliminate the orbital relaxation error and achieve the same level of accuracy for core-hole spectra as is typically expected of EOM-CCSD in the valence region. These results show that very accurate x-ray absorption spectra for molecules with first-row atoms can be computed at a cost essentially the same as that for EOM-CCSD. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Comments: 25 pages, 5 figures, 1 table

Atomic Spectra in a Six-Level Scheme for Electromagnetically Induced Transparency and Autler-Townes Splitting in Rydberg Atoms

Authors: Amy K. Robinson, Alexandra Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters.… ▽ More We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters. We also present two theoretical models for this atomic system, where these two models capture different aspects of the observed spectra. One is a six-level model used to predict dominant spectral features and the other a more complex eight-level model used to predict the full characteristics of this system. Both models shows very good agreement with the experimental data. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Comments: 13 pages, 11 figures

Journal ref: Phys. Rev. A 103, 023704 (2021)

Floating Potential Of Spherical Dust In Collisionless Magnetised Plasmas

Authors: L. M. Simons, M. Coppins

Abstract: Determining the equilibrium charge of conducting spheres in plasmas is important for interpreting Langmuir probe measurements, plasma surface interactions and dust particle behaviour. The Monte Carlo code Dust in Magnetised Plasmas (DiMPl) has been developed for the purpose of determining the forces and charging behaviour of conducting spheroids under a variety of conditions and benchmarked agains… ▽ More Determining the equilibrium charge of conducting spheres in plasmas is important for interpreting Langmuir probe measurements, plasma surface interactions and dust particle behaviour. The Monte Carlo code Dust in Magnetised Plasmas (DiMPl) has been developed for the purpose of determining the forces and charging behaviour of conducting spheroids under a variety of conditions and benchmarked against previous numerical results. The floating potentials of spheres in isothermal, collisionless, hydrogen plasmas as a function of magnetic field strength and size relative to Debye length are studied using DiMPl and compared with new results from the N-body tree code (pot) and recent particle in cell measurements. The results of all three simulations are similar, identifying a small range at modest ion magnetisation parameters over which the electron current is reduced relative to the ion current. The potential as a function of magnetic field strength is found to be relatively insensitive to dust size for dust smaller than the Debye length. The potential of large dust is found to depend less strongly on flow speed for modest magnetic field strengths and to decrease with increasing flow speed in the presence of strong magnetic fields for smaller dust. A semi-empirical model for the potential of small dust in a collisionless plasma as a function of magnetic field strength is developed which reproduces the expected currents and potentials in the high and low magnetic field limit. △ Less

Submitted 31 March, 2020; originally announced March 2020.

Formation of COMs through CO hydrogenation on interstellar grains

Authors: M. A. J. Simons, T. Lamberts, H. M. Cuppen

Abstract: Glycoaldehyde, ethylene glycol, and methyl formate are complex organic molecules that have been observed in dark molecular clouds. Because there is no efficient gas-phase route to produce these species, it is expected that a low-temperature surface route existst that does not require energetic processing. CO hydrogenation experiments at low temperatures showed that this is indeed the case. Glyoxal… ▽ More Glycoaldehyde, ethylene glycol, and methyl formate are complex organic molecules that have been observed in dark molecular clouds. Because there is no efficient gas-phase route to produce these species, it is expected that a low-temperature surface route existst that does not require energetic processing. CO hydrogenation experiments at low temperatures showed that this is indeed the case. Glyoxal can form through recombination of two HCO radicals and is then further hydrogenated. Here we aim to constrain the methyl formate, glycolaldehyde, and ethylene glycol formation on the surface of interstellar dust grains through this cold and dark formation route. We also probe the dependence of the grain mantle composition on the initial gas-phase composition and the dust temperature. A full CO hydrogenation reaction network was built based on quantum chemical calculations for the rate constants and branching ratios. This network was used in combination with a microscopic kinetic Monte Carlo simulation to simulate ice chemistry, taking into account all positional information. After benchmarking the model against CO-hydrogenation experiments, simulations under molecular cloud conditions were performed. COMs are formed in all interstellar conditions we studied, even at temperatures as low as 8 K. This is because the HCO + HCO reaction can occur when HCO radicals are formed close to each other and do not require to diffuse. Relatively low abundances of methyl formate are formed. The final COM abundances depend more on the H-to-CO ratio and less on temperature. Only above 16 K, where CO build-up is less efficient, does temperature start to play a role. Molecular hydrogen is predominantly formed through abstraction reactions on the surface. Our simulations are in agreement with observed COM ratios for mantles that have been formed at low temperatures. △ Less

Submitted 14 January, 2020; originally announced January 2020.

Journal ref: A&A 634, A52 (2020)

Quantum Physics Meets Music: A "Real-Time" Guitar Recording Using Rydberg-Atoms and Electromagnetically Induced Transparency

Authors: Christopher L. Holloway, Matthew T. Simons, Abdulaziz H. Haddab, Carl J. Williams, Maxwell W. Holloway

Abstract: We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recordi… ▽ More We demonstrate how Rydberg atoms and the phenomena of electromagnetically induced transparency can be used to aid in the recording of a musical instrument in real time as it is played. Also, by using two different atomic species (cesium and rubidium) in the same vapor cell, we demonstrate the ability to record two guitars simultaneously, where each atomic species detects and allows for the recording of each guitar separately. The approach shows how audio data (the musical composition) can be detected with a quantum system, illustrating how we can control ensembles of atoms to such an extent that we can use them in this "entertaining" example of recording a musical instrument. △ Less

Submitted 1 April, 2019; originally announced April 2019.

Comments: 5 page, 4 figures. arXiv admin note: substantial text overlap with arXiv:1903.00786

Journal ref: AIP Advances 9, 065110 (2019)

Detecting and Receiving Phase Modulated Signals with a Rydberg Atom-Based Mixer

Authors: Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon, David Novotny

Abstract: Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of… ▽ More Recently, we introduced a Rydberg-atom based mixer capable of detecting and measuring the phase of a radio-frequency field through the electromagnetically induced transparency (EIT) and Autler-Townes (AT) effect. The ability to measure phase with this mixer allows for an atom-based receiver to detect digital modulated communication signals. In this paper, we demonstrate detection and reception of digital modulated signals based on various phase-shift keying approaches. We demonstrate Rydberg atom-based digital reception of binary phase-shift keying (BPSK), quadrature phase-shift keying (QPSK), and quadrature amplitude (QAM) modulated signals over a 19.626~GHz carrier to transmit and receive a bit stream in cesium vapor. We present measured values of Error Vector Magnitude (EVM, a common communication metric used to assess how accurate a symbol or bit stream is received) as a function of symbol rate for BPSK, QPSK, 16QAM, 32QAM, and 64QAM modulation schemes. These results allow us to discuss the bandwidth of a Rydberg-atom based receiver system. △ Less

Submitted 25 March, 2019; originally announced March 2019.

Comments: 5 pages, 6 figures,

Weak Electric-Field Detection with Sub-1 Hz Resolution at Radio Frequencies Using A Rydberg Atom-Based Mixer

Authors: Joshua A. Gordon, Matthew T. Simons, Abdulaziz H. Haddab, Christopher L. Holloway

Abstract: Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus… ▽ More Rydberg atoms have been used for measuring radio-frequency (RF) electric (E)-fields due to their strong dipole moments over the frequency range of 500 MHz-1 THz. For this, electromagnetically induced transparency (EIT) within the Autler-Townes (AT) regime is used such that the detected E-field is proportional to AT splitting. However, for weak E-fields AT peak separation becomes unresolvable thus limiting the minimum detectable E-field. Here, we demonstrate using the Rydberg atoms as an RF mixer for weak E-field detection well below the AT regime with frequency discrimination better than 1 Hz resolution. Two E-fields incident on a vapor cell filled with cesium atoms are used. One E-field at 19.626000 GHz drives the 34D_(5/2)->5P_(3/2) Rydberg transition and acts as a local oscillator (LO) and a second signal E-field (Sig) of interest is at 19.626090 GHz. In the presence of the LO, the Rydberg atoms naturally down convert the Sig field to a 90 kHz intermediate frequency (IF) signal. This IF signal manifests as an oscillation in the probe laser intensity through the Rydberg vapor and is easily detected with a photodiode and lock-in amplifier. In the configuration used here, E-field strength down to ? 46 mV/m +/-2 mV/m were detected. Furthermore, neighboring fields 0.1 Hz away and equal in strength to Sig could be discriminated without any leakage into the lock-in signal. For signals 1 Hz away and as high as +60 dB above Sig, leakage into the lock-in signal could be kept below -3 dB. △ Less

Submitted 22 March, 2019; originally announced March 2019.

A Multiple-Band Rydberg-Atom Based Receiver/Antenna: AM/FM Stereo Reception

Authors: Christopher L. Holloway, Matthew T. Simons, Abdulaziz H. Haddab, Joshua A. Gordon, Stephen D. Voran

Abstract: With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to… ▽ More With the re-definition of the International System of Units (SI) that occurred in October of 2018, there has recently been a great deal of attention on the development of atom-based sensors for metrology applications. In particular, great progress has been made in using Rydberg-atom based techniques for electric (E) field metrology. These Rydberg-atom based E-field sensors have made it possible to develop atom-based receivers and antennas, which potentially have many benefits over conventional technologies in detecting and receiving modulated signals. In this paper, we demonstrate the ``first'' multi-channel atom-based reception of both amplitude (AM) and frequency (FM) modulation signals. We demonstrate this by using two different atomic species in order to detect and receive AM and FM modulated signals in stereo. Also, in this paper we investigate the effect of Gaussian noise on the ability to receive AM/FM signals. These results illustrate the multi-band (or multi-channel) receiving capability of a atom-based receiver/antenna to produce high fidelity stereo reception from both AM and FM signals. This paper shows an interesting way of applying the relatively newer (and something esoteric) field of quantum-optics and atomic-physics to the century old topic of radio reception. △ Less

Submitted 2 March, 2019; originally announced March 2019.

Comments: 10 pages, 9 figures, 1 Table, and 32 references

A New Quantum-Based Power Standard: Using Rydberg Atoms for a SI-Traceable Radio-Frequency Power Measurement Technique in Rectangular Waveguides

Authors: Christopher L. Holloway, Matthew T. Simons, Marcus D. Kautz, Abdulaziz H. Haddab, Joshua A. Gordon, Thomas P. Crowley

Abstract: In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carri… ▽ More In this work we demonstrate an approach for the measurement of radio-frequency (RF) power using electromagnetically induced transparency (EIT) in a Rydberg atomic vapor. This is accomplished by placing alkali atomic vapor in a rectangular waveguide and measuring the electric (E) field strength (utilizing EIT and Autler-Townes splitting) for a wave propagating down the waveguide. The RF power carried by the wave is then related to this measured E-field, which leads to a new direct International System of Units (SI) measurement of RF power. To demonstrate this approach, we first measure the field distribution of the fundamental mode in the waveguide and then measure the power carried by the wave at both 19.629 GHz and 26.526 GHz. We obtain good agreement between the power measurements obtained with this new technique and those obtained with a conventional power meter. △ Less

Submitted 22 June, 2018; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: 4 page, 7 figures

Measurement of Radio-Frequency Radiation Pressure

Authors: Alexandra Artusio-Glimpse, Matt T. Simons, Ivan Ryger, Marc Kautz, John Lehman, Christopher L. Holloway

Abstract: We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a p… ▽ More We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a power measure traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we demonstrate the ability to measure the radiation pressure/force carried in a field at 15~GHz. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 2 pages 4 figures

Quantum-optical spectroscopy for plasma electric field measurements and diagnostics

Authors: David A. Anderson, Georg Raithel, Matthew Simons, Christopher L. Holloway

Abstract: Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagneticall… ▽ More Measurements of plasma electric fields are essential to the advancement of plasma science and applications. Methods for non-invasive in situ measurements of plasma fields on sub-millimeter length scales with high sensitivity over a large field range remain an outstanding challenge. Here, we introduce and demonstrate a new method for plasma electric field measurement that employs electromagnetically induced transparency as a high-resolution quantum-optical probe for the Stark energy level shifts of plasma-embedded Rydberg atoms, which serve as highly-sensitive field sensors with a large dynamic range. The method is applied in diagnostics of plasmas photo-excited out of a cesium vapor. The plasma electric fields are extracted from spatially-resolved measurements of field-induced shape changes and shifts of Rydberg resonances in rubidium tracer atoms. Measurement capabilities over a range of plasma densities and temperatures are exploited to characterize plasmas in applied magnetic fields and to image electric-field distributions in cyclotron-heated plasmas. △ Less

Submitted 23 December, 2017; originally announced December 2017.

Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) splitting in the Presence of Band-Limited White Gaussian Noise

Authors: Christopher L. Holloway, Matthew T. Simons, Marcus D. Kautz, David A. Anderson, Georg Raithel, Daniel Stack, Marc C. St. John, Wansheng Su

Abstract: We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups… ▽ More We investigate the effect of band-limited white Gaussian noise (BLWGN) on electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, when performing atom-based continuous-wave (CW) radio-frequency (RF) electric (E) field strength measurements with Rydberg atoms in an atomic vapor. This EIT/AT-based E-field measurement approach is currently being investigated by several groups around the world as a means to develop a new SI traceable RF E-field measurement technique. For this to be a useful technique, it is important to understand the influence of BLWGN. We perform EIT/AT based E-field experiments with BLWGN centered on the RF transition frequency and for the BLWGN blue-shifted and red-shifted relative to the RF transition frequency. The EIT signal can be severely distorted for certain noise conditions (band-width, center-frequency, and noise power), hence altering the ability to accurately measure a CW RF E-field strength. We present a model to predict the changes in the EIT signal in the presence of noise. This model includes AC Stark shifts and on resonance transitions associated with the noise source. The results of this model are compared to the experimental data and we find very good agreement between the two. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 14 page, 15 figures, 1 table

Line shape analysis of the K$β$ transition in muonic hydrogen

Authors: D. S. Covita, D. F. Anagnostopoulos, H. Fuhrmann, H. Gorke, D. Gotta, A. Gruber, A. Hirtl, T. Ishiwatari, P. Indelicato, T. S. Jensen, E. -O. Le Bigot, V. E. Markushin, M. Nekipelov, V. N. Pomerantsev, V. P. Popov, J. M. F. dos Santos, Ph. Schmid, L. M. Simons, M. Theisen, M. Trassinelli, J. F. C. A. Veloso, J. Zmeskal

Abstract: The K$β$ transition in muonic hydrogen was measured with a high-resolution crystal spectrometer. The spectrum is shown to be sensitive to the ground-state hyperfine splitting, the corresponding triplet-to-singlet ratio, and the kinetic energy distribution in the $3p$ state. The hyperfine splitting and triplet-to-singlet ratio are found to be consistent with the values expected from theoretical and… ▽ More The K$β$ transition in muonic hydrogen was measured with a high-resolution crystal spectrometer. The spectrum is shown to be sensitive to the ground-state hyperfine splitting, the corresponding triplet-to-singlet ratio, and the kinetic energy distribution in the $3p$ state. The hyperfine splitting and triplet-to-singlet ratio are found to be consistent with the values expected from theoretical and experimental investigations and, therefore, were fixed accordingly in order to reduce the uncertainties in the further reconstruction of the kinetic energy distribution. The presence of high-energetic components was established and quantified in both a phenomenological, i.e. cascade-model-free fit, and in a direct deconvolution of the Doppler broadening based on the Bayesian approach. △ Less

Submitted 5 April, 2018; v1 submitted 18 September, 2017; originally announced September 2017.

Comments: 22 pages, 21 figures

Measurement of the charged pion mass using a low-density target of light atoms

Authors: M Trassinelli, D. F. Anagnostopoulos, G Borchert, A Dax, J. -P Egger, D Gotta, M Hennebach, P Indelicato, Y. -W Liu, B Manil, N Nelms, L. M. Simons, A Wells

Abstract: We present a new evaluation of the negatively charged pion mass based on the simultaneous spec-troscopy of pionic nitrogen and muonic oxygen transitions using a gaseous target composed by a N 2 /O 2 mixture at 1.4 bar. We present the experimental setup and the methods for deriving the pion mass value from the spatial separation from the 5g -- 4 f $π$N transition line and the 5g -- 4 f $μ$O transit… ▽ More We present a new evaluation of the negatively charged pion mass based on the simultaneous spec-troscopy of pionic nitrogen and muonic oxygen transitions using a gaseous target composed by a N 2 /O 2 mixture at 1.4 bar. We present the experimental setup and the methods for deriving the pion mass value from the spatial separation from the 5g -- 4 f $π$N transition line and the 5g -- 4 f $μ$O transition line used as reference. Moreover, we discuss the importance to use dilute targets in order to minimize the influence of additional spectral lines from the presence of remaining electrons during the radiative emission. The occurrence of possible satellite lines is investigated via hypothesis testing methods using the Bayes factor. △ Less

Submitted 30 September, 2016; originally announced September 2016.

Journal ref: EPJ web conf. 130, 01022 (2016)

Simultaneous Use of Cs and Rb Rydberg Atoms for Independent RF Electric Field Measurements via Electromagnetically Induced Transparency

Authors: Matt T. Simons, Joshua A. Gordon, Christopher L. Holloway

Abstract: We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurem… ▽ More We demonstrate simultaneous electromagnetically-induced transparency (EIT) with cesium (Cs) and rubidium (Rb) Rydberg atoms in the same vapor cell with coincident (overlap**) optical fields. Each atomic system can detect radio frequency (RF) electric (E) field strengths through modification of the EIT signal (Autler-Townes (AT) splitting), which leads to a direct SI traceable RF E-field measurement. We show that these two systems can detect the same the RF E-field strength simultaneously, which provides a direct in situ comparison of Rb and Cs RF measurements in Rydberg atoms. In effect, this allows us to perform two independent measurements of the same quantity in the same laboratory, providing two different immediate and independent measurements. This gives two measurements that helps rule out systematic effects and uncertainties in this E-field metrology approach, which are important when establishing an international measurement standard for an E-field strength and is a necessary step for this method to be accepted as a standard calibration technique. We use this approach to measure E-fields at 9.2~GHz, 11.6~GHz, and 13.4~GHz, which correspond to three different atomic states (different principal atomic numbers and angular momentums) for the two atom species. △ Less

Submitted 6 July, 2016; originally announced July 2016.

Comments: 10 pages, 13 figures

Journal ref: JOURNAL OF APPLIED PHYSICS 120, 123103 (2016)

Measurement of the charged pion mass using X-ray spectroscopy of exotic atoms

Authors: M Trassinelli, D. F. Anagnostopoulos, G. Borchert, A. Dax, J. P Egger, D. Gotta, M. Hennebach, P. Indelicato, Y. -W. Liu, B. Manil, N. Nelms, L. M. Simons, A. Wells

Abstract: The $5g-4f$ transitions in pionic nitrogen and muonic oxygen were measured simultaneously by using a gaseous nitrogen-oxygen mixture at 1.4\,bar. Due to the precise knowledge of the muon mass the muonic line provides the energy calibration for the pionic transition. A value of (139.57077\,$\pm$\,0.00018)\,MeV/c$^{2}$ ($\pm$\,1.3ppm) is derived for the mass of the negatively charged pion, which is… ▽ More The $5g-4f$ transitions in pionic nitrogen and muonic oxygen were measured simultaneously by using a gaseous nitrogen-oxygen mixture at 1.4\,bar. Due to the precise knowledge of the muon mass the muonic line provides the energy calibration for the pionic transition. A value of (139.57077\,$\pm$\,0.00018)\,MeV/c$^{2}$ ($\pm$\,1.3ppm) is derived for the mass of the negatively charged pion, which is 4.2ppm larger than the present world average. △ Less

Submitted 11 May, 2016; originally announced May 2016.

Journal ref: Phys. Lett. B 759, 583-588 (2016)

Effect of inhomogeneities and substrate on the dynamics of the metal-insulator transition in VO$_2$ thin films

Authors: M. Rodriguez-Vega, M. T. Simons, E. Radue, S. Kittiwatanakul, J. Lu, S. A. Wolf, R. A. Lukaszew, I. Novikova, E. Rossi

Abstract: We study the thermal relaxation dynamics of VO$_2$ films after the ultrafast photo-induced metal-insulator transition for two VO$_2$ film samples grown on Al$_2$O$_3$ and TiO$_2$ substrates. We find two orders of magnitude difference in the recovery time (a few ns for the VO$_2$/Al$_2$O$_3$ sample vs. hundreds of ns for the VO$_2$/TiO$_2$ sample). We present a theoretical model that accurately des… ▽ More We study the thermal relaxation dynamics of VO$_2$ films after the ultrafast photo-induced metal-insulator transition for two VO$_2$ film samples grown on Al$_2$O$_3$ and TiO$_2$ substrates. We find two orders of magnitude difference in the recovery time (a few ns for the VO$_2$/Al$_2$O$_3$ sample vs. hundreds of ns for the VO$_2$/TiO$_2$ sample). We present a theoretical model that accurately describes the MIT thermal properties and interpret the experimental measurements. We obtain quantitative results that show how the microstructure of the VO$_2$ film and the thermal conductivity of the interface between the VO$_2$ film and the substrate affect long time-scale recovery dynamics. We also obtain a simple analytic relationship between the recovery time-scale and some of the film parameters. △ Less

Submitted 12 September, 2015; v1 submitted 22 April, 2015; originally announced April 2015.

Comments: 10 pages, 15 figures

Journal ref: Phys. Rev. B 92, 115420 (2015)

Hadronic shift in pionic hydrogen

Authors: M. Hennebach, D. F. Anagnostopoulos, A. Dax, H. Fuhrmann, D. Gotta, A. Gruber, A. Hirtl, P. Indelicato, Y. -W. Liu, B. Manil, V. E. Markushin, A. J. Rusi el Hassani, L. M. Simons, M. Trassinelli, J. Zmeskal

Abstract: The hadronic shift in pionic hydrogen has been redetermined to be $ε_{1s}=7.086\,\pm\,0.007(stat)\,\pm\,0.006(sys)$\,eV by X-ray spectroscopy of ground state transitions applying various energy calibration schemes. The experiment was performed at the high-intensity low-energy pion beam of the Paul Scherrer Institut by using the cyclotron trap and an ultimate-resolution Bragg spectrometer with bent… ▽ More The hadronic shift in pionic hydrogen has been redetermined to be $ε_{1s}=7.086\,\pm\,0.007(stat)\,\pm\,0.006(sys)$\,eV by X-ray spectroscopy of ground state transitions applying various energy calibration schemes. The experiment was performed at the high-intensity low-energy pion beam of the Paul Scherrer Institut by using the cyclotron trap and an ultimate-resolution Bragg spectrometer with bent crystals. △ Less

Submitted 17 December, 2014; v1 submitted 25 June, 2014; originally announced June 2014.

Comments: 10 pages, 6 figures

Observation of second-order hyper-Raman generation in LiNbO3 whispering-gallery mode disk resonators

Authors: Matt T. Simons, Irina Novikova

Abstract: In this manuscript we report experimental demonstration of nonlinear frequency conversion at several optical frequencies in a whispering-gallery mode resonator (WGMR). Due to the enhancement of nonlinear interactions inside a WGMR, interaction of a 1064 nm pump field with a LiNbO3 disk produced a weak, but measurable non-phase matched 532 nm second harmonic field at room temperature (>100C below t… ▽ More In this manuscript we report experimental demonstration of nonlinear frequency conversion at several optical frequencies in a whispering-gallery mode resonator (WGMR). Due to the enhancement of nonlinear interactions inside a WGMR, interaction of a 1064 nm pump field with a LiNbO3 disk produced a weak, but measurable non-phase matched 532 nm second harmonic field at room temperature (>100C below the phase-matching temperature), for pump powers of a few tens of mW. For higher pump powers, we observed the generation of four additional fields at 545 nm, 559 nm, 573 nm, and 587 nm. The relative spectral shift between two consecutive fields corresponds to a 455 cm^-1 vibrational mode in LiNbO3 crystal. Our preliminary analysis indicates that these fields are the result of a multi-phonon hyper-Raman scattering, in which two photons of the pump field are converted into one photon of a higher-frequency field and one or several optical phonons. △ Less

Submitted 14 July, 2011; originally announced July 2011.

Comments: 3 pages, 4 figures

Journal ref: Optics Letters 36, 3027 (2011)

Pionic deuterium

Authors: Th. Strauch, F. D. Amaro, D. Anagnostopoulos, P. Bühler, D. S. Covita, H. Gorke, D. Gotta, A. Gruber, A. Hirtl, P. Indelicato, E. -O. Le Bigot, M. Nekipelov, J. M. F. dos Santos, Ph. Schmid, S. Schlesser, L. M. Simons, M. Trassinelli, J. F. C. A. Veloso, J. Zmeskal

Abstract: The strong interaction shift $ε$ and broadening Γ in pionic deuterium have been determined in a high statistics study of the πD(3p - 1s) X-ray transition using a high-resolution crystal spectrometer. The pionic deuterium shift will provide constraints for the pion-nucleon isospin scattering lengths extracted from measurements of shift and broadening in pionic hydrogen. The hadronic broadening is r… ▽ More The strong interaction shift $ε$ and broadening Γ in pionic deuterium have been determined in a high statistics study of the πD(3p - 1s) X-ray transition using a high-resolution crystal spectrometer. The pionic deuterium shift will provide constraints for the pion-nucleon isospin scattering lengths extracted from measurements of shift and broadening in pionic hydrogen. The hadronic broadening is related to pion absorption and production at threshold. The results are ε= (-2356 {\pm} 31)meV (repulsive) and Γ1s = (1171+23/-49) meV yielding for the complex πD scattering length a = [-(24.99 {\pm} 0.33) + i (6.22+0.12/-0.26)]x10-3/mπ. From the imaginary part, the threshold parameter for pion production is obtained to be α = (251 +5/-11) μb. This allows, in addition, and by using results from pion absorption in 3He at threshold, the determination of the effective couplings g0 and g1 for s-wave pion absorption on isoscalar and isovector NN pairs. △ Less

Submitted 12 July, 2011; v1 submitted 10 November, 2010; originally announced November 2010.

Comments: 19 pages, 14 figures, 8 tables accepted for publication in EPJA

Report number: LEX-10-01

Journal ref: Eur.Phys.J.A47:88,2011

Precision determination of the dpi -> NN transition strength at threshold

Authors: Th. Strauch, F. D. Amaro, D. F. Anagnostopoulos, P. Bühler, D. S. Covita, H. Gorke, D. Gotta, A. Gruber, A. Hirtl, P. Indelicato, E. -O. LeBigot, M. Nekipelov, J. M. F. dos Santos, S. Schlesser, Ph. Schmid, L. M. Simons, M. Trassinelli, J. F. C. A. Veloso, J. Zmeskal

Abstract: An unusual but effective way to determine at threshold the dpi -> NN transition strength is to exploit the hadronic ground-state broadening in pionic deuterium, accessible by x-ray spectroscopy. The broadening is dominated by the true absorption channel dpi- -> nn, which is related to s-wave pion production pp -> dpi+ by charge symmetry and detailed balance. Using the exotic atom circumvents the… ▽ More An unusual but effective way to determine at threshold the dpi -> NN transition strength is to exploit the hadronic ground-state broadening in pionic deuterium, accessible by x-ray spectroscopy. The broadening is dominated by the true absorption channel dpi- -> nn, which is related to s-wave pion production pp -> dpi+ by charge symmetry and detailed balance. Using the exotic atom circumvents the problem of Coulomb corrections to the cross section as necessary in the production experiments. Our dedicated measurement finds (1171+23/-49) meV for the broadening yielding (252+5/-11) \mub. △ Less

Submitted 22 March, 2010; originally announced March 2010.

Comments: 4 pages, 2 figures, 1 table

Journal ref: Phys.Rev.Lett.104:142503,2010

Pionic Deuterium

Authors: Th. Strauch, F. D. Amaro, D. F. Anagnostopoulos, P. B"\uhler, D. S. Covita, H. Gorke, D. Gotta, A. Gruber, A. Hirtl, P. Indelicato, E. -O. Le Bigot, M. Nekipelov, J. M. F. dos Santos, Ph. Schmid, S. Schlesser, L. M. Simons, M. Trassinelli, J. F. C. A. Veloso, J. Zmeskal

Abstract: The strong interaction shift and broadening in pionic deuterium have been remeasured with high statistics by means of the (3p-1s) X-ray transition using the cyclotron trap and a high-resolution crystal spectrometer. Preliminary results are (-2325+/-31) meV (repulsive) for the shift and (1171+23/-49} meV for the width, which yields precise values for the pion-deuteron scattering length and the th… ▽ More The strong interaction shift and broadening in pionic deuterium have been remeasured with high statistics by means of the (3p-1s) X-ray transition using the cyclotron trap and a high-resolution crystal spectrometer. Preliminary results are (-2325+/-31) meV (repulsive) for the shift and (1171+23/-49} meV for the width, which yields precise values for the pion-deuteron scattering length and the threshold parameter for pion production. △ Less

Submitted 23 February, 2010; originally announced February 2010.

Comments: Conf. Proc. Few Body 19 (FB19), August 31 - September 5, 2009, Bonn, Germany 9 pages, 13 figures

Line shape of the muH(3p - 1s) hyperfine transitions

Authors: D. S. Covita, D. F. Anagnostopoulos, H. Gorke, D. Gotta, A. Gruber, A. Hirtl, T. Ishiwatari, P. Indelicato, E. -O. LeBigot, M. Nekipelov, J. M. F. dos Santos, Ph. Schmid, L. M. Simons, M. Trassinelli, J. F. C. A. Veloso, J. Zmeskal

Abstract: The (3p - 1s) X-ray transition to the muonic hydrogen ground state was measured with a high resolution crystal spectrometer. A Doppler effect broadening of the X-ray line was established which could be attributed to different Coulomb de-excitation steps preceding the measured transition. The assumption of a statistical population of the hyperfine levels of the muonic hydrogen ground state was di… ▽ More The (3p - 1s) X-ray transition to the muonic hydrogen ground state was measured with a high resolution crystal spectrometer. A Doppler effect broadening of the X-ray line was established which could be attributed to different Coulomb de-excitation steps preceding the measured transition. The assumption of a statistical population of the hyperfine levels of the muonic hydrogen ground state was directly confirmed by the experiment and measured values for the hyperfine splitting can be reported. The results allow a decisive test of advanced cascade model calculations and establish a method to extract fundamental strong-interaction parameters from pionic hydrogen experiments. △ Less

Submitted 10 October, 2008; v1 submitted 9 October, 2008; originally announced October 2008.

Comments: Submitted to Physical Review Letters

X-Ray Transitions from Antiprotonic Noble Gases

Authors: D. Gotta, K. Rashid, B. Fricke, P. Indelicato, L. M. Simons

Abstract: The onset of antiprotonic X-ray transitions at high principal quantum numbers and the occurence of electronic X-rays in antiprotonic argon, krypton, and xenon has been analyzed with the help of Multiconfiguration Dirac-Fock calculations. The shell-by-shell ionisation by Auger electron emission, characterised by appearance and disappearance of X-ray lines, is followed through the antiprotonic cas… ▽ More The onset of antiprotonic X-ray transitions at high principal quantum numbers and the occurence of electronic X-rays in antiprotonic argon, krypton, and xenon has been analyzed with the help of Multiconfiguration Dirac-Fock calculations. The shell-by-shell ionisation by Auger electron emission, characterised by appearance and disappearance of X-ray lines, is followed through the antiprotonic cascade by considering transition and binding energies of both the antiproton and the remaining electrons. Electronic lines could be attributed partly to specific states of the antiprotonic atom de-excitation. △ Less

Submitted 5 February, 2008; v1 submitted 22 January, 2008; originally announced January 2008.

Comments: 16 pages, 13 figures

Journal ref: Eur. Phys. J. D 47, 11-26 (2008)

Highly charged ion X-rays from Electron-Cyclotron Resonance Ion Sources

Authors: Paul Indelicato, S. Boucard, D. S. Covita, D. Gotta, A. Gruber, A. Hirtl, H. Fuhrmann, E. -O. Le Bigot, S. Schlesser, J. M. F. Dos Santos, L. M. Simons, L. Stingelin, M. Trassinelli, J. Veloso, A. Wasser, J. Zmeskal

Abstract: Radiation from the highly-charged ions contained in the plasma of Electron-Cyclotron Resonance Ion Sources constitutes a very bright source of X-rays. Because the ions have a relatively low kinetic energy ($\approx 1$ eV) transitions can be very narrow, containing only small Doppler broadening. We describe preliminary accurate measurements of two and three-electron ions with Z=16--18. We show ho… ▽ More Radiation from the highly-charged ions contained in the plasma of Electron-Cyclotron Resonance Ion Sources constitutes a very bright source of X-rays. Because the ions have a relatively low kinetic energy ($\approx 1$ eV) transitions can be very narrow, containing only small Doppler broadening. We describe preliminary accurate measurements of two and three-electron ions with Z=16--18. We show how these measurement can test sensitively many-body relativistic calculations or can be used as X-ray standards for precise measurements of X-ray transitions in exotic atoms. △ Less

Submitted 28 October, 2006; originally announced October 2006.