Showing 1–10 of 10 results for author: Simeonov, R

Characterization of the PADME positron beam for the X17 measurement

Authors: S. Bertelli, F. Bossi, B. Buonomo, R. De Sangro, C. Di Giulio, E. Di Meco, K. Dimitrova, D. Domenici, F. Ferrarotto, G. Finocchiaro, L. G. Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, P. Gianotti, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Mancini, G. C. Organtini, M. Raggi, I. Sarra, R. Simeonov , et al. (5 additional authors not shown)

Abstract: This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity… ▽ More This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity through a combination of data analysis and Monte Carlo simulations. The results achieved include an absolute precision in the momentum of the beam to within $\sim$ 1-2 MeV$/c$, a relative beam energy spread below 0.25\%, and an absolute precision in the intensity of the beam at the level of 2\% percent. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Application of the VMM ASIC for SiPM-based calorimetry

Authors: I. Bearden, V. Buchakchiev, A. Buhl, L. Dufke, T. Isidori, S. Jia, V. Kozhuharov, C. Loizides, H. Muller, D. Pfeiffer, M. Rauch, A. Rusu, R. Simeonov

Abstract: Highly integrated multichannel readout electronics is crucial in contemporary particle physics experiments. A novel silicon photomultiplier readout system based on the VMM3a ASIC was developed, for the first time exploiting this chip for calorimetric purposes. To extend the dynamic range the signal from each SiPM channel was processed by two electronics channels with different gain. A fully operat… ▽ More Highly integrated multichannel readout electronics is crucial in contemporary particle physics experiments. A novel silicon photomultiplier readout system based on the VMM3a ASIC was developed, for the first time exploiting this chip for calorimetric purposes. To extend the dynamic range the signal from each SiPM channel was processed by two electronics channels with different gain. A fully operational prototype system with 256 SiPM readout channels allowed the collection of data from a prototype of the ALICE Forward Hadron Calorimeter (FoCal-H). The design and the test beam results using high energy hadron beams are presented and discussed, confirming the applicability of VMM3a-based solutions for energy measurements in a high rate environment. △ Less

Submitted 18 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: 12 pages, 10 figures

Performance of the electromagnetic and hadronic prototype segments of the ALICE Forward Calorimeter

Authors: M. Aehle, J. Alme, C. Arata, I. Arsene, I. Bearden, T. Bodova, V. Borshchov, O. Bourrion, M. Bregant, A. van den Brink, V. Buchakchiev, A. Buhl, T. Chujo, L. Dufke, V. Eikeland, M. Fasel, N. Gauger, A. Gautam, A. Ghimouz, Y. Goto, R. Guernane, T. Hachiya, H. Hassan, L. He, H. Helstrup , et al. (50 additional authors not shown)

Abstract: We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS a… ▽ More We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS and SPS beam lines with hadron (electron) beams up to energies of 350 (300) GeV. Regarding FoCal-E, we report a comprehensive analysis of its response to minimum ionizing particles across all pad layers. The longitudinal shower profile of electromagnetic showers is measured with a layer-wise segmentation of 1$X_0$. As a projection to the performance of the final detector in electromagnetic showers, we demonstrate linearity in the full energy range, and show that the energy resolution fulfills the requirements for the physics needs. Additionally, the performance to separate two-showers events was studied by quantifying the transverse shower width. Regarding FoCal-H, we report a detailed analysis of the response to hadron beams between 60 and 350 GeV. The results are compared to simulations obtained with a Geant4 model of the test beam setup, which in particular for FoCal-E are in good agreement with the data. The energy resolution of FoCal-E was found to be lower than 3% at energies larger than 100 GeV. The response of FoCal-H to hadron beams was found to be linear, albeit with a significant intercept that is about factor 2 larger than in simulations. Its resolution, which is non-Gaussian and generally larger than in simulations, was quantified using the FWHM, and decreases from about 16% at 100 GeV to about 11% at 350 GeV. The discrepancy to simulations, which is particularly evident at low hadron energies, needs to be further investigated. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 55 pages (without acronyms), 45 captioned figures

Status and Prospects of PADME

Authors: Susanna Bertelli, Fabio Bossi, Riccardo De Sangro, Claudio Di Giulio, Elisa Di Meco, Danilo Domenici, Giuseppe Finocchiaro, Luca Gennaro Foggetta, Marco Garattini, Andrea Ghigo, Paola Gianotti, Marco Mancini, Ivano Sarra, Tommaso Spadaro, Eleuterio Spiriti, Clara Taruggi, Elisabetta Vilucchi, Venelin Kozhuharov, Kalina Dimitrova, Simeon Ivanov, Svetoslav Ivanov, Radoslav Simeonov, Georgi Georgiev, Fabio Ferrarotto, Emanuele Leonardi , et al. (6 additional authors not shown)

Abstract: The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI insti… ▽ More The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI institute, the PADME detector has been modified and a new data-taking run has been undertaken to probe the existance of the so-called ``X17" particle △ Less

Submitted 15 May, 2023; originally announced May 2023.

Comments: 6 pages, 12 figures, proceedings from Moriond EW 2023

Design and Test-Beam Results of the FoCal-H Demonstrator Prototype

Authors: Radoslav Simeonov

Abstract: The forward calorimeter (FoCal) of ALICE, planned to be operational for LHC Run 4, will cover the pseudorapidity range 3.4 $ \leq η\leq $ 5.8 allowing to probe the unexplored region of Bjorken-x down to $10^{-6}$. The hadronic section of the FoCal (FoCal-H) will be based on copper capillary tubes and scintillating fibers inside, with light read out by silicon photomultipliers (SiPM). A "proof of c… ▽ More The forward calorimeter (FoCal) of ALICE, planned to be operational for LHC Run 4, will cover the pseudorapidity range 3.4 $ \leq η\leq $ 5.8 allowing to probe the unexplored region of Bjorken-x down to $10^{-6}$. The hadronic section of the FoCal (FoCal-H) will be based on copper capillary tubes and scintillating fibers inside, with light read out by silicon photomultipliers (SiPM). A "proof of concept" demonstration prototype was built and tested in the H6 beamline at the CERN SPS in the beginning of October, 2021, exposing it to an unseparated charged particle beam with energy in the interval 20 GeV $-$ 80 GeV. The design of the prototype as well as the results of the energy reconstruction are presented and the validation with a GEANT4-based simulation is discussed. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Journal ref: Instruments 2022, 6, 70

Cross-section measurement of two-photon annihilation in-flight of positrons at $\sqrt{s}=20$ MeV with the PADME detector

Authors: F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, A. P. Caricato, G. Chiodini, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, F. Giacchino, P. Gianotti, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Martino, I. Oceano, F. Oliva , et al. (13 additional authors not shown)

Abstract: The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection… ▽ More The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection of the photon pair and one of the most precise for positron energies below 1 GeV. This measurement represents a necessary step to search for dark sector particles and mediators weakly coupled to photons and/or electrons with masses ranging from 1 MeV to 20 MeV with PADME. The measurement agrees with the Next to Leading Order QED prediction within the overall 6% uncertainty. △ Less

Submitted 7 November, 2022; v1 submitted 26 October, 2022; originally announced October 2022.

Comments: Submitted to PRD

Dark sector studies with the PADME experiment

Authors: Anna Paola Caricato, Maurizio Martino, Isabella Oceano, Federica Oliva, Stefania Spagnolo, Gabriele Chiodini, Fabio Bossi, Riccardo De Sangro, Claudio Di Giulio, Danilo Domenici, Giuseppe Finocchiaro, Luca Gennaro Foggetta, Marco Garattini, Andrea Ghigo, Federica Giacchino, Paola Gianotti, Tommaso Spadaro, Eletuerio Spiriti, Clara Taruggi, Elisabetta Vilucchi, Venelin Kozhuharov, Simeon Ivanov, Svetoslav Ivanov, Radoslav Simeonov, Georgi Georgiev , et al. (13 additional authors not shown)

Abstract: The Positron Annihilation to Dark Matter Experiment (PADME) uses the positron beam of the DA$Φ$NE Beam-Test Facility, at the Laboratori Nazionali di Frascati (LNF) to search for a Dark Photon $A'$. The search technique studies the missing mass spectrum of single-photon final states in $e^+e^-\rightarrow A'γ$ annihilation in a positron-on-thin-target experiment. This approach facilitates searches f… ▽ More The Positron Annihilation to Dark Matter Experiment (PADME) uses the positron beam of the DA$Φ$NE Beam-Test Facility, at the Laboratori Nazionali di Frascati (LNF) to search for a Dark Photon $A'$. The search technique studies the missing mass spectrum of single-photon final states in $e^+e^-\rightarrow A'γ$ annihilation in a positron-on-thin-target experiment. This approach facilitates searches for new particles such as long lived Axion-Like-Particles, protophobic X bosons and Dark Higgs. This talk illustrated the scientific program of the experiment and its first physics results. In particular, the measurement of the cross-section of the SM process $e^+e^-\rightarrow γγ$ at $\sqrt{s}$=21 MeV was shown. △ Less

Submitted 1 May, 2023; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: Fixed typos and updated gamma gamma results from preliminary ones to published ones. 6 pages, 6 figures, conference proceedings to be published in SciPost

Commissioning of the PADME experiment with a positron beam

Authors: P. Albicocco, R. Assiro, F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, E. Capitolo, C. Capoccia, A. P. Caricato, S. Ceravolo, G. Chiodini, G. Corradi, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, S. Fiore, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, F. Giacchino, A. Ghigo, P. Gianotti , et al. (31 additional authors not shown)

Abstract: The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ posi… ▽ More The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ positrons-on-target. This paper presents the PADME detector status after commissioning in July 2019. In addition, the software algorithms employed to reconstruct physics objects, such as photons and charged particles, and the calibration procedures adopted are illustrated in detail. The results show that the experimental apparatus reaches the design performance, and is able to identify and measure standard electromagnetic processes, such as positron Bremsstrahlung, electron-positron annihilation into two photons. △ Less

Submitted 20 July, 2022; v1 submitted 6 May, 2022; originally announced May 2022.

Comments: submitted to JINST

The PADME beam line Monte Carlo simulation

Authors: F. Bossi, P. Branchini, B. Buonomo, V. Capirossi, A. P. Caricato, G. Chiodini, R. De Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, S. Fiore, G. Finocchiaro, L. G Foggetta, A. Frankenthal, M. Garattini, G. Georgiev, A. Ghigo, P. Gianotti, F. Iazzi, S. Ivanov, Sv. Ivanov, V. Kozhuharov, E. Leonardi, E. Long, M. Martino , et al. (16 additional authors not shown)

Abstract: The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) of the INFN Laboratory of Frascati is designed to search for invisible decays of dark sector particles produced in electron-positron annihilation events with a positron beam and a thin fixed target, by measuring the missing mass of single-photon final states. The presence of backgrounds originating from beam halo particles can significan… ▽ More The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) of the INFN Laboratory of Frascati is designed to search for invisible decays of dark sector particles produced in electron-positron annihilation events with a positron beam and a thin fixed target, by measuring the missing mass of single-photon final states. The presence of backgrounds originating from beam halo particles can significantly reduce the sensitivity of the experiment. To thoroughly understand the origin of the beam background contribution, a detailed Geant4-based Monte Carlo simulation has been developed, containing a full description of the detector together with the beam line and its optical elements. This simulation allows the full interactions of each particle to be described, both during beam line transport and during detection, a possibility which represents an innovative way to obtain reliable background predictions △ Less

Submitted 12 April, 2022; originally announced April 2022.

Comments: 14 pages 10 figures

Characterisation and performance of the PADME electromagnetic calorimeter

Authors: P. Albicocco, J. Alexander, F. Bossi, P. Branchini, B. Buonomo, C. Capoccia, E. Capitolo, G. Chiodini, A. P. Caricato, R. de Sangro, C. Di Giulio, D. Domenici, F. Ferrarotto, G. Finocchiaro, S. Fiore, L. G. Foggetta, A. Frankenthal, G. Georgiev, A. Ghigo, F. Giacchino, P. Gianotti, S. Ivanov, V. Kozhuharov, E. Leonardi, B. Liberti , et al. (20 additional authors not shown)

Abstract: The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring t… ▽ More The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring the energy and position of the final-state $γ$. The missing four-momentum carried away by the $A'$ can be evaluated from this information and the particle mass inferred. This paper presents the design, construction, and calibration of the PADME's electromagnetic calorimeter. The results achieved in terms of equalisation, detection efficiency and energy resolution during the first phase of the experiment demonstrate the effectiveness of the various tools used to improve the calorimeter performance with respect to earlier prototypes. △ Less

Submitted 21 October, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 15 pages, 15 figures