-
Equivalence of flexible stripline and coaxial cables for superconducting qubit control and readout pulses
Authors:
V. Y. Monarkha,
S. Simbierowicz,
M. Borrelli,
R. van Gulik,
N. Drobotun,
D. Kuitenbrouwer,
D. Bouman,
D. Datta,
P. Eskelinen,
E. Mannila,
J. Kaikkonen,
V. Vesterinen,
J. Govenius,
R. E. Lake
Abstract:
We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four…
▽ More
We report a comparative study on microwave control lines for a transmon qubit using: (i) flexible stripline transmission lines, and (ii) semi-rigid coaxial cables. During each experiment we performed repeated measurements of the energy relaxation and coherence times of a transmon qubit using one of the wiring configurations. Each measurement run spanned 70 h to 250 h of measurement time, and four separate cooldowns were performed so that each configuration could be tested twice. From these datasets we observe that changing the microwave control lines from coaxial cables to flexible stripline transmission lines does not have a measurable effect on coherence compared to thermal cycling the system, or random coherence fluctuations. Our results open up the possibility of large scale integration of qubit control lines with integrated component with planar layouts on flexible substrate.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Qubit-compatible substrates with superconducting through-silicon vias
Authors:
K. Grigoras,
N. Yurttagül,
J. -P. Kaikkonen,
E. T. Mannila,
P. Eskelinen,
D. P. Lozano,
H. -X. Li,
M. Rommel,
D. Shiri,
N. Tiencken,
S. Simbierowicz,
A. Ronzani,
J. Hätinen,
D. Datta,
V. Vesterinen,
L. Grönberg,
J. Biznárová,
A. Fadavi Roudsari,
S. Kosen,
A. Osman,
M. Prunnila,
J. Hassel,
J. Bylander,
J. Govenius
Abstract:
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the ar…
▽ More
We fabricate and characterize superconducting through-silicon vias and electrodes suitable for superconducting quantum processors. We measure internal quality factors of a million for test resonators excited at single-photon levels, on chips with superconducting vias used to stitch ground planes on the front and back sides of the chips. This resonator performance is on par with the state of the art for silicon-based planar solutions, despite the presence of vias. Via stitching of ground planes is an important enabling technology for increasing the physical size of quantum processor chips, and is a first step toward more complex quantum devices with three-dimensional integration.
△ Less
Submitted 8 November, 2022; v1 submitted 25 January, 2022;
originally announced January 2022.
-
Microwave calibration of qubit drive line components at millikelvin temperatures
Authors:
Slawomir Simbierowicz,
Volodymyr Y. Monarkha,
Suren Singh,
Nizar Messaoudi,
Philip Krantz,
Russell E. Lake
Abstract:
Systematic errors in qubit state preparation arise due to non-idealities in the qubit control lines such as impedance mismatch. Using a data-based methodology of short-open-load calibration at a temperature of 30 mK, we report calibrated 1-port scattering parameter data of individual qubit drive line components. At 5~GHz, cryogenic return losses of a 20-dB-attenuator, 10-dB-attenuator, a 230-mm-lo…
▽ More
Systematic errors in qubit state preparation arise due to non-idealities in the qubit control lines such as impedance mismatch. Using a data-based methodology of short-open-load calibration at a temperature of 30 mK, we report calibrated 1-port scattering parameter data of individual qubit drive line components. At 5~GHz, cryogenic return losses of a 20-dB-attenuator, 10-dB-attenuator, a 230-mm-long 0.86-mm silver-plated cupronickel coaxial cable, and a 230-mm-long 0.86-mm NbTi coaxial cable were found to be 35$^{+3}_{-2}$ dB, 33$^{+3}_{-2}$ dB, 34$^{+3}_{-2}$ dB, and 29$^{+2}_{-1}$ dB respectively. For the same frequency, we also extract cryogenic insertion losses of 0.99$^{+0.04}_{-0.04}$ dB and 0.02$^{+0.04}_{-0.04}$ dB for the coaxial cables. We interpret the results using a master equation simulation of all XY gates performed on a single qubit. For example, we simulate a sequence of two 5 ns gate pulses (X & Y) through a 2-element Fabry-Pérot cavity with 276-mm path length directly preceding the qubit, and establish that the return loss of its reflective elements must be >9.7 dB (> 14.7 dB) to obtain 99.9 % (99.99 %) gate fidelity.
△ Less
Submitted 29 January, 2022; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Daryoush Shiri,
Christopher Warren,
Leif Grönberg,
Jaakko Salonen,
Tahereh Abad,
Janka Biznárová,
Marco Caputo,
Liangyu Chen,
Kestutis Grigoras,
Göran Johansson,
Anton Frisk Kockum,
Christian Križan,
Daniel Pérez Lozano,
Graham Norris,
Amr Osman,
Jorge Fernández-Pendás,
Alberto Ronzani,
Anita Fadavi Roudsari,
Slawomir Simbierowicz,
Giovanna Tancredi,
Andreas Wallraff,
Christopher Eichler
, et al. (2 additional authors not shown)
Abstract:
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods…
▽ More
We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,μs$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers.
△ Less
Submitted 14 June, 2022; v1 submitted 5 December, 2021;
originally announced December 2021.
-
Broadband continuous variable entanglement generation using Kerr-free Josephson metamaterial
Authors:
Michael Perelshtein,
Kirill Petrovnin,
Visa Vesterinen,
Sina Hamedani Raja,
Ilari Lilja,
Marco Will,
Alexander Savin,
Slawomir Simbierowicz,
Robab Jabdaraghi,
Janne Lehtinen,
Leif Grönberg,
Juha Hassel,
Mika Prunnila,
Joonas Govenius,
Sorin Paraoanu,
Pertti Hakonen
Abstract:
Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is ope…
▽ More
Entangled microwave photons form a fundamental resource for quantum information processing and sensing with continuous variables. We use a low-loss Josephson metamaterial comprising superconducting, non-linear, asymmetric inductive elements to generate frequency-entangled photons from vacuum fluctuations at a rate of 2 giga entangled bits per second spanning over 4 GHz bandwidth. The device is operated as a traveling wave parametric amplifier under Kerr-relieving biasing conditions. Furthermore, we realize the first successfully demonstration of single-mode squeezing in such devices -- $3.1\pm0.7$\,dB below the zero-point level at half of modulation frequency.
△ Less
Submitted 19 March, 2022; v1 submitted 11 November, 2021;
originally announced November 2021.
-
A superconductor free of quasiparticles for seconds
Authors:
E. T. Mannila,
P. Samuelsson,
S. Simbierowicz,
J. T. Peltonen,
V. Vesterinen,
L. Grönberg,
J. Hassel,
V. F. Maisi,
J. P. Pekola
Abstract:
Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order…
▽ More
Superconducting devices, based on the Cooper pairing of electrons, play an important role in existing and emergent technologies, ranging from radiation detectors to quantum computers. Their performance is limited by spurious quasiparticle excitations formed from broken Cooper pairs. Efforts to achieve ultra-low quasiparticle densities have reached time-averaged numbers of excitations on the order of one in state-of-the-art devices. However, the dynamics of the quasiparticle population as well as the time scales for adding and removing individual excitations remain largely unexplored. Here, we experimentally demonstrate a superconductor completely free of quasiparticles for periods lasting up to seconds. We monitor the quasiparticle number on a mesoscopic superconductor in real time by measuring the charge tunneling to a normal metal contact. Quiet, excitation-free periods are interrupted by random-in-time Cooper pair breaking events, followed by a burst of charge tunneling within a millisecond. Our results demonstrate the possibility of operating devices without quasiparticles with potentially improved performance. In addition, our experiment probes the origins of nonequilibrium quasiparticles in our device; the decay of the Cooper pair breaking rate over several weeks following the initial cooldown rules out processes arising from cosmic or long-lived radioactive sources.
△ Less
Submitted 5 July, 2022; v1 submitted 31 January, 2021;
originally announced February 2021.
-
Characterizing cryogenic amplifiers with a matched temperature-variable noise source
Authors:
Slawomir Simbierowicz,
Visa Vesterinen,
Joshua Milem,
Aleksi Lintunen,
Mika Oksanen,
Leif Roschier,
Leif Grönberg,
Juha Hassel,
David Gunnarsson,
Russell E. Lake
Abstract:
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that in…
▽ More
We present a cryogenic microwave noise source with a characteristic impedance of 50 $Ω$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K without causing significant back-action heating on the sample space. As a proof-of-concept experiment, we perform Y-factor measurements of an amplifier cascade that includes a traveling wave parametric amplifier and a commercial high electron mobility transistor amplifier. We observe system noise temperatures as low as $680^{+20}_{-200}$ mK at 5.7 GHz corresponding to $1.5^{+0.1}_{-0.7}$ excess photons. The system we present has immediate applications in the validation of solid-state qubit readout lines.
△ Less
Submitted 25 February, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Quantum paraelectric varactors for radio-frequency measurements at mK temperatures
Authors:
P. Apostolidis,
B. J. Villis,
J. F. Chittock-Wood,
A. Baumgartner,
V. Vesterinen,
S. Simbierowicz,
J. Hassel,
M. R. Buitelaar
Abstract:
Radio-frequency reflectometry allows for fast and sensitive electrical readout of charge and spin qubits hosted in quantum dot devices coupled to resonant circuits. Optimizing readout, however, requires frequency tuning of the resonators and impedance matching. This is difficult to achieve using conventional semiconductor or ferroelectric-based varactors in the detection circuit as their performan…
▽ More
Radio-frequency reflectometry allows for fast and sensitive electrical readout of charge and spin qubits hosted in quantum dot devices coupled to resonant circuits. Optimizing readout, however, requires frequency tuning of the resonators and impedance matching. This is difficult to achieve using conventional semiconductor or ferroelectric-based varactors in the detection circuit as their performance degrades significantly in the mK temperature range relevant for solid-state quantum devices. Here we explore a different type of material, strontium titanate, a quantum paraelectric with exceptionally large field-tunable permittivity at low temperatures. Using strontium titanate varactors we demonstrate perfect impedance matching and resonator frequency tuning at 6 mK and characterize the varactors at this temperature in terms of their capacitance tunability, dissipative losses and magnetic field sensitivity. We show that this allows us to optimize the radio-frequency readout signal-to-noise ratio of carbon nanotube quantum dot devices to achieve a charge sensitivity of 4.8 $μ$e/Hz$^{1/2}$ and capacitance sensitivity of 0.04 aF/Hz$^{1/2}$.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Qubit Measurement by Multichannel Driving
Authors:
Joni Ikonen,
Jan Goetz,
Jesper Ilves,
Aarne Keränen,
Andras M. Gunyho,
Matti Partanen,
Kuan Y. Tan,
Dibyendu Hazra,
Leif Grönberg,
Visa Vesterinen,
Slawomir Simbierowicz,
Juha Hassel,
Mikko Möttönen
Abstract:
We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize m…
▽ More
We theoretically propose and experimentally implement a method of measuring a qubit by driving it close to the frequency of a dispersively coupled bosonic mode. The separation of the bosonic states corresponding to different qubit states begins essentially immediately at maximum rate, leading to a speedup in the measurement protocol. Also the bosonic mode can be simultaneously driven to optimize measurement speed and fidelity. We experimentally test this measurement protocol using a superconducting qubit coupled to a resonator mode. For a certain measurement time, we observe that the conventional dispersive readout yields close to 100% higher average measurement error than our protocol. Finally, we use an additional resonator drive to leave the resonator state to vacuum if the qubit is in the ground state during the measurement protocol. This suggests that the proposed measurement technique may become useful in unconditionally resetting the resonator to a vacuum state after the measurement pulse.
△ Less
Submitted 25 February, 2019; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Nanobolometer with Ultralow Noise Equivalent Power
Authors:
R. Kokkoniemi,
J. Govenius,
V. Vesterinen,
R. E. Lake,
A. M. Gunyho,
K. Y. Tan,
S. Simbierowicz,
L. Grönberg,
J. Lehtinen,
M. Prunnila,
J. Hassel,
O. -P. Saira,
M. Möttönen
Abstract:
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent pow…
▽ More
Since the introduction of bolometers more than a century ago, they have been applied in a broad spectrum of contexts ranging from security and the construction industry to particle physics and astronomy. However, emerging technologies and missions call for faster bolometers with lower noise. Here, we demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, $20\textrm{ zW}/\sqrt{\textrm{Hz}}$, than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 $μ$s at $60\textrm{ zW}/\sqrt{\textrm{Hz}}$. These results suggest a calorimetric energy resolution of $0.3\textrm{ zJ}=h\times 0.4$ THz with a time constant of 30 $μ$s. Thus the introduced nanobolometer is a promising candidate for future applications requiring extreme precision and speed such as those in astronomy and terahertz photon counting.
△ Less
Submitted 26 June, 2018; v1 submitted 25 June, 2018;
originally announced June 2018.
-
Flux-driven Josephson parametric amplifier for sub-GHz frequencies fabricated with side-wall passivated spacer junction technology
Authors:
Slawomir Simbierowicz,
Visa Vesterinen,
Leif Grönberg,
Janne Lehtinen,
Mika Prunnila,
Juha Hassel
Abstract:
We present experimental results on a Josephson parametric amplifier tailored for readout of ultra-sensitive thermal microwave detectors. In particular, we discuss the impact of fabrication details on the performance. We show that the small volume of deposited dielectric materials enabled by the side-wall passivated spacer niobium junction technology leads to robust operation across a wide range of…
▽ More
We present experimental results on a Josephson parametric amplifier tailored for readout of ultra-sensitive thermal microwave detectors. In particular, we discuss the impact of fabrication details on the performance. We show that the small volume of deposited dielectric materials enabled by the side-wall passivated spacer niobium junction technology leads to robust operation across a wide range of operating temperatures up to 1.5 K. The flux-pumped amplifier has gain in excess of 20 dB in three-wave mixing and its center frequency is tunable between 540 MHz and 640 MHz. At 600 MHz, the amplifier adds 105 mK $\pm$ 9 mK of noise, as determined with the hot/cold source method. Phase-sensitive amplification is demonstrated with the device.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Flux-tunable heat sink for quantum electric circuits
Authors:
Matti Partanen,
Kuan Yen Tan,
Shumpei Masuda,
Joonas Govenius,
Russell E. Lake,
Máté Jenei,
Leif Grönberg,
Juha Hassel,
Slawomir Simbierowicz,
Visa Vesterinen,
Jani Tuorila,
Tapio Ala-Nissila,
Mikko Möttönen
Abstract:
Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our dev…
▽ More
Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above $10^5$ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.
△ Less
Submitted 29 December, 2017;
originally announced December 2017.
-
Side-wall spacer passivated sub-um Josephson junction fabrication process
Authors:
Leif Grönberg,
Mikko Kiviranta,
Visa Vesterinen,
Janne Lehtinen,
Slawomir Simbierowicz,
Juho Luomahaara,
Mika Prunnila,
Juha Hassel
Abstract:
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for smooth crossline contacting and low parasitic capacitance. The SWAPS structure enables formation of junctions with dimensions at or below the lithography-limited lin…
▽ More
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for smooth crossline contacting and low parasitic capacitance. The SWAPS structure enables formation of junctions with dimensions at or below the lithography-limited linewidth. An additional benefit is avoiding the excessive use of amorphous dielectric materials which is favorable in sub-Kelvin microwave applications often plagued by nonlinear and lossy dielectrics. We apply the structure to niobium trilayer junctions, and provide characterization results yielding evidence on wafer-scale scalability, and critical current density tuning in the range of 0.1 -- 3.0 kA/cm$^2$. We discuss the applicability of the junction process in the context of different applications, such as, SQUID magnetometers and Josephson parametric amplifiers.
△ Less
Submitted 9 March, 2018; v1 submitted 20 June, 2017;
originally announced June 2017.
