-
Characterisation of analogue Monolithic Active Pixel Sensor test structures implemented in a 65 nm CMOS imaging process
Authors:
Gianluca Aglieri Rinella,
Giacomo Alocco,
Matias Antonelli,
Roberto Baccomi,
Stefania Maria Beole,
Mihail Bogdan Blidaru,
Bent Benedikt Buttwill,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Marielle Chartier,
Yongjun Choi,
Manuel Colocci,
Giacomo Contin,
Dominik Dannheim,
Daniele De Gruttola,
Manuel Del Rio Viera,
Andrea Dubla,
Antonello di Mauro,
Maurice Calvin Donner,
Gregor Hieronymus Eberwein,
Jan Egger,
Laura Fabbietti,
Finn Feindt,
Kunal Gautam
, et al. (69 additional authors not shown)
Abstract:
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25…
▽ More
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25 $μ$m). These variants have been tested following exposure to varying levels of irradiation up to 3 MGy and $10^{16}$ 1 MeV n$_\text{eq}$ cm$^{-2}$. Here the results from prototypes that feature direct analogue output of a 4$\times$4 pixel matrix are reported, allowing the systematic and detailed study of charge collection properties. Measurements were taken both using $^{55}$Fe X-ray sources and in beam tests using minimum ionizing particles. The results not only demonstrate the feasibility of using this technology for particle detection but also serve as a reference for future applications and optimisations.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Simulations and Performance Studies of a MAPS in 65 nm CMOS Imaging Technology
Authors:
Adriana Simancas,
Justus Braach,
Eric Buschmann,
Ankur Chauhan,
Dominik Dannheim,
Manuel Del Rio Viera,
Katharina Dort,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Judith Schlaadt,
Paul Schütze,
Walter Snoeys,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improv…
▽ More
Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF, granting a high signal-to-noise ratio and low power consumption. Additionally, the 65 nm CMOS imaging technology brings a reduction in material budget and improved logic density of the readout circuitry, compared to previously studied technologies. Given these features, this technology was chosen by the TANGERINE project to develop the next generation of silicon pixel sensors. The sensor design targets temporal and spatial resolutions compatible with the requirements for a vertex detector at future lepton colliders. Simulations and test-beam characterization of technology demonstrators have been carried out in close collaboration with the CERN EP R&D program and the ALICE ITS3 upgrade. TCAD device simulations using generic do** profiles and Monte Carlo simulations have been used to build an understanding of the technology and predict the performance parameters of the sensor. Technology demonstrators of a 65 nm CMOS MAPS with a small collection electrode have been characterized in laboratory and test-beam facilities by studying performance parameters such as cluster size, charge collection, and efficiency. This work compares simulation results to test-beam data. The experimental results establish this technology as a promising candidate for a vertex detector at future lepton colliders and give valuable information for improving the simulation approach.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Develo** a Monolithic Silicon Sensor in a 65 nm CMOS Imaging Technology for Future Lepton Collider Vertex Detectors
Authors:
Adriana Simancas,
Justus Braach,
Eric Buschmann,
Ankur Chauhan,
Dominik Dannheim,
Manuel Del Rio Viera,
Katharina Dort,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Walter Snoeys,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scatterin…
▽ More
Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scattering material. The Tangerine Project WP1 at DESY participates in the Strategic R&D Programme and is focused on the development of a monolithic active pixel sensor with a time and spatial resolution compatible with the requirements for a future lepton collider vertex detector. By fulfilling these requirements, the Tangerine detector is suitable as well to be used as telescope planes for the DESY-II Test Beam facility. The project comprises all aspects of sensor development, from the electronics engineering and the sensor design using simulations, to laboratory and test beam investigations of prototypes. Generic TCAD Device and Monte-Carlo simulations are used to establish an understanding of the technology and provide important insight into performance parameters of the sensor. Testing prototypes in laboratory and test beam facilities allows for the characterization of their response to different conditions. By combining results from all these studies it is possible to optimize the sensor layout. This contribution presents results from generic TCAD and Monte-Carlo simulations, and measurements performed with test chips of the first sensor submission.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
TelePix -- A fast region of interest trigger and timing layer for the EUDET Telescopes
Authors:
Heiko Augustin,
Sebastian Dittmeier,
Jan Hammerich,
Adrian Herkert,
Lennart Huth,
David Immig,
Ivan Perić,
André Schöning,
Adriana Simancas,
Marcel Stanitzki,
Benjamin Weinläder
Abstract:
Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter archite…
▽ More
Test beam facilities are essential to study the response of novel detectors to particles. At the DESY II Test Beam facility, users can test their detectors with an electron beam with a momentum from 1-6 GeV. To track the beam particles, EUDET-style telescopes are provided in each beam area. They provide excellent spatial resolution, but the time resolution is limited by the rolling shutter architecture to a precision of approximately 230 $μ$s. Since the demand on particle rates -- and hence track multiplicities -- is increasing timing is becoming more relevant. DESY foresees several upgrades of the telescopes. TelePix is an upgrade project to provide track timestam** with a precision of better than 5 ns and a configurable region of interest to trigger the telescope readout. Small scale prototypes have been characterised in laboratory and test beam measurements. Laboratory tests with an injection corresponding to 2300 electrons show a S/N of above 20. Test beam characterization shows efficiencies of above 99% over a threshold range of more than 100 mV and time resolutions of 2.4 ns at low noise rates.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Towards a New Generation of Monolithic Active Pixel Sensors
Authors:
Ankur Chauhan,
Manuel Del Rio Viera,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Adriana Simancas,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola,
Håkan Wennlöf
Abstract:
A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant red…
▽ More
A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature size processes. MAPS are a cost-effective alternative to hybrid pixel sensors since flip-chip bonding is not required. In addition, they allow for significant reductions of the material budget of detector systems, due to the smaller physical thicknesses of the active sensor and the absence of a separate readout chip. The TANGERINE project develops a sensor suitable for future Higgs factories as well as for a beam telescope to be used at beam-test facilities. The sensors will have small collection electrodes (order of $μ$m) to maximize the signal-to-noise ratio, which makes it possible to minimize power dissipation in the circuitry. The first batch of test chips, featuring full front-end amplifiers with Krummenacher feedback, was produced and tested at the Mainzer Mikrotron (MAMI) at the end of 2021. MAMI provides an electron beam with currents up to 100 $μ$A and an energy of 855 MeV. The analog output signal of the test chips was recorded with a high bandwidth oscilloscope and used to study the charge-sensitive amplifier of the chips in terms of waveform analysis. A beam telescope was used as a reference system to allow for track-based analysis of the recorded data.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Upgrading the Beam Telescopes at the DESY II Test Beam Facility
Authors:
H. Augustin,
R. Diener,
S. Dittmeier,
P. M. Freeman,
J. Hammerich,
A. Herkert,
L. Huth,
D. Immig,
U. Krämer,
N. Meyners,
I. Perić,
O. Schäfer,
A. Schöning,
A. Simancas,
M. Stanitzki,
D. Stuart,
B. Weinläder
Abstract:
The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered…
▽ More
The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered readout and a readout time of > 115 $μ$s. If the highest available rates are used, multiple particles are traversing the telescopes within one readout frame, thus creating ambiguities that cannot be resolved without additional timing layers. Several upgrades are currently investigated and tested: Firstly, a fast monolithic pixel sensor, the TelePix, to provide precise track timing and triggering on a region of interest is proposed to overcome this limitation. The TelePix is a 180 nm HV-CMOS sensor that has been developed jointly by DESY, KIT and the University of Heidelberg and designed at KIT. In this publication, the performance evaluation is presented: The difference between two amplifier designs is evaluated. A high hit detection efficiency of above 99.9 % combined with a time resolution of below 4 ns at negligible pixel noise rates is determined. Finally, the digital hit output to provide region of interest triggering is evaluated and shows a short absolute delay with respect to a traditional trigger scintillator as well as an excellent time resolution. Secondly, a fast LGAD plane has been proposed to provide a time resolution of a few 10 ps, which is foreseen to drastically improve the timing performance of the telescope. Time resolutions of below 70 ps have been determined in collaboration with the University of California, Santa Barbara.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
The Tangerine project: Development of high-resolution 65 nm silicon MAPS
Authors:
Håkan Wennlöf,
Ankur Chauhan,
Manuel Del Rio Viera,
Doris Eckstein,
Finn Feindt,
Ingrid-Maria Gregor,
Karsten Hansen,
Lennart Huth,
Larissa Mendes,
Budi Mulyanto,
Daniil Rastorguev,
Christian Reckleben,
Sara Ruiz Daza,
Paul Schütze,
Adriana Simancas,
Simon Spannagel,
Marcel Stanitzki,
Anastasiia Velyka,
Gianpiero Vignola
Abstract:
The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced…
▽ More
The Tangerine project aims to develop new state-of-the-art high-precision silicon detectors. Part of the project has the goal of develo** a monolithic active pixel sensor using a novel 65 nm CMOS imaging process, with a small collection electrode. This is the first application of this process in particle physics, and it is of great interest as it allows for an increased logic density and reduced power consumption and material budget compared to other processes. The process is envisioned to be used in for example the next ALICE inner tracker upgrade, and in experiments at the electron-ion collider.
The initial goal of the three-year Tangerine project is to develop and test a sensor in a 65 nm CMOS imaging process that can be used in test beam telescopes at DESY, providing excellent spatial resolution and high time resolution, and thus demonstrating the capabilities of the process. The project covers all aspects of sensor R&D, from electronics and sensor design using simulations, to prototype test chip characterisation in labs and at test beams. The sensor design simulations are performed by using a powerful combination of detailed electric field simulations using technology computer-aided design and high-statistics Monte Carlo simulations using the Allpix Squared framework. A first prototype test chip in the process has been designed and produced, and successfully operated and tested both in labs and at test beams.
△ Less
Submitted 11 June, 2022;
originally announced June 2022.