-
The impact of microwave phase noise on diamond quantum sensing
Authors:
Andris Berzins,
Maziar Saleh Ziabari,
Yaser Silani,
Ilja Fescenko,
Joshua T. Damron,
John F. Barry,
Andrey Jarmola,
Pauli Kehayias,
Bryan A. Richards,
Janis Smits,
Victor M. Acosta
Abstract:
Precision optical measurements of the electron-spin precession of nitrogen-vacancy (NV) centers in diamond form the basis of numerous applications. The most sensitivity-demanding applications, such as femtotesla magnetometry, require the ability to measure changes in GHz spin transition frequencies at the sub-millihertz level, corresponding to a fractional resolution of better than 10^{-12}. Here…
▽ More
Precision optical measurements of the electron-spin precession of nitrogen-vacancy (NV) centers in diamond form the basis of numerous applications. The most sensitivity-demanding applications, such as femtotesla magnetometry, require the ability to measure changes in GHz spin transition frequencies at the sub-millihertz level, corresponding to a fractional resolution of better than 10^{-12}. Here we study the impact of microwave (MW) phase noise on the response of an NV sensor. Fluctuations of the phase of the MW waveform cause undesired rotations of the NV spin state. These fluctuations are imprinted in the optical readout signal and, left unmitigated, are indistinguishable from magnetic field noise. We show that the phase noise of several common commercial MW generators results in an effective pT s^{1/2}-range noise floor that varies with the MW carrier frequency and the detection frequency of the pulse sequence. The data are described by a frequency domain model incorporating the MW phase noise spectrum and the filter-function response of the sensing protocol. For controlled injection of white and random-walk phase noise, the observed NV magnetic noise floor is described by simple analytic expressions that accurately capture the scaling with pulse sequence length and the number of pi pulses. We outline several strategies to suppress the impact of MW phase noise and implement a version, based on gradiometry, that realizes a >10-fold suppression. Our study highlights an important challenge in the pursuit of sensitive diamond quantum sensors and is applicable to other qubit systems with a large transition frequency.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Super-resolution diamond magnetic microscopy of superparamagnetic nanoparticles
Authors:
Nazanin Mosavian,
Forrest Hubert,
Janis Smits,
Pauli Kehayias,
Yaser Silani,
Bryan A. Richards,
Victor M. Acosta
Abstract:
Scanning-probe and wide-field magnetic microscopes based on Nitrogen-Vacancy (NV) centers in diamond have enabled remarkable advances in the study of biology and materials, but each method has drawbacks. Here, we implement an alternative method for nanoscale magnetic microscopy based on optical control of the charge state of NV centers in a dense layer near the diamond surface. By combining a donu…
▽ More
Scanning-probe and wide-field magnetic microscopes based on Nitrogen-Vacancy (NV) centers in diamond have enabled remarkable advances in the study of biology and materials, but each method has drawbacks. Here, we implement an alternative method for nanoscale magnetic microscopy based on optical control of the charge state of NV centers in a dense layer near the diamond surface. By combining a donut-beam super-resolution technique with optically detected magnetic resonance spectroscopy, we imaged the magnetic fields produced by single 30-nm iron-oxide nanoparticles. The magnetic microscope has a lateral spatial resolution of ~100 nm, and it resolves the individual magnetic dipole features from clusters of nanoparticles with interparticle spacings down to ~190 nm. The magnetic feature amplitudes are more than an order of magnitude larger than those obtained by confocal magnetic microscopy due to the smaller characteristic NV-nanoparticle distance within nearby sensing voxels. We analyze the magnetic point-spread function and sensitivity as a function of the microscope's spatial resolution and identify sources of background fluorescence that limit the present performance, including diamond second-order Raman emission and imperfect NV charge-state control. Our method, which uses less than 10 mW laser power and can be parallelized by patterned illumination, introduces a new format for nanoscale magnetic imaging.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
Nuclear quadrupole resonance spectroscopy with a femtotesla diamond magnetometer
Authors:
Yaser Silani,
Janis Smits,
Ilja Fescenko,
Michael W. Malone,
Andrew F. McDowell,
Andrey Jarmola,
Pauli Kehayias,
Bryan Richards,
Nazanin Mosavian,
Nathaniel Ristoff,
Victor M. Acosta
Abstract:
Sensitive Radio-Frequency (RF) magnetometers that can detect oscillating magnetic fields at the femtotesla level are needed for demanding applications such as Nuclear Quadrupole Resonance (NQR) spectroscopy. RF magnetometers based on Nitrogen-Vacancy (NV) centers in diamond have been predicted to offer femtotesla sensitivity, but published experiments have largely been limited to the picotesla lev…
▽ More
Sensitive Radio-Frequency (RF) magnetometers that can detect oscillating magnetic fields at the femtotesla level are needed for demanding applications such as Nuclear Quadrupole Resonance (NQR) spectroscopy. RF magnetometers based on Nitrogen-Vacancy (NV) centers in diamond have been predicted to offer femtotesla sensitivity, but published experiments have largely been limited to the picotesla level. Here, we demonstrate a femtotesla RF magnetometer based on an NV-doped diamond membrane inserted between two ferrite flux concentrators. The device operates in bias magnetic fields of 2-10 microtesla and provides a ~300-fold amplitude enhancement within the diamond for RF magnetic fields in the 0.07-3.6 MHz range. The magnetometer's sensitivity is ~70 fT s^{1/2} at 0.35 MHz, and the noise floor decreases to below 2 fT after 1 hour of acquisition. We used this sensor to detect the 3.6 MHz NQR signal of 14N in sodium nitrite powder at room temperature. NQR signals are amplified by a resonant RF coil wrapped around the sample, allowing for higher signal-to-noise ratio detection. The diamond RF magnetometer's recovery time after a strong RF pulse is ~35 us, limited by the coil ring-down time. The sodium-nitrite NQR frequency shifts linearly with temperature as -1.00 +/- 0.02 kHz/K, the magnetization dephasing time is T2* = 887 +/- 51 us, and a spin-lock spin-echo pulse sequence extends the signal lifetime to 332 +/- 23 ms, all consistent with coil-based NQR studies. Our results expand the sensitivity frontier of diamond magnetometers to the femtotesla range, with potential applications in security, medical imaging, and materials science.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Stimulated emission depletion microscopy with diamond silicon-vacancy centers
Authors:
Yaser Silani,
Forrest Hubert,
Victor M. Acosta
Abstract:
The spatial resolution and fluorescence signal amplitude in stimulated emission depletion (STED) microscopy is limited by the photostability of available fluorophores. Here, we show that negatively-charged silicon vacancy (SiV) centers in diamond are promising fluorophores for STED microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. A home-built p…
▽ More
The spatial resolution and fluorescence signal amplitude in stimulated emission depletion (STED) microscopy is limited by the photostability of available fluorophores. Here, we show that negatively-charged silicon vacancy (SiV) centers in diamond are promising fluorophores for STED microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. A home-built pulsed STED microscope was used to image shallow implanted SiV centers in bulk diamond at room temperature. The SiV stimulated emission cross section for 765-800 nm light is found to be (4.0 +/- 0.3) x 10^(-17) cm^2, which is approximately 2-4 times larger than that of the negatively-charged diamond nitrogen vacancy center and approaches that of commonly-used organic dye molecules. We performed STED microscopy on isolated SiV centers and observed a lateral full-width-at-half-maximum spot size of 89 +/- 2 nm, limited by the low available STED laser pulse energy (0.4 nJ). For a pulse energy of 5 nJ, the resolution is expected to be ~20 nm. We show that the present microscope can resolve SiV centers separated by <150 nm that cannot be resolved by confocal microscopy.
△ Less
Submitted 4 September, 2019; v1 submitted 19 July, 2019;
originally announced July 2019.