-
Consistent SPH simulations of the anisotropic dispersion of a contaminant plume
Authors:
Jaime Klapp,
Leonardo Di G. Sigalotti,
Carlos E. Alvarado-Rodriguez,
Otto Rendon
Abstract:
Solute transport through heterogeneous porous media is governed by fuid advection, molecular diffusion and anisotropic dispersion. The dispersion is assumed to obey Fick's law and the dispersion coefficient is defined as a second rank tensor. However, this problem has revealed to be a very difficult one because independently of the numerical methods employed, the solutions are seen to exhibit arti…
▽ More
Solute transport through heterogeneous porous media is governed by fuid advection, molecular diffusion and anisotropic dispersion. The dispersion is assumed to obey Fick's law and the dispersion coefficient is defined as a second rank tensor. However, this problem has revealed to be a very difficult one because independently of the numerical methods employed, the solutions are seen to exhibit artificial oscillations and negative concentrations when the dispersivity becomes anisotropic. Here we report consistent SPH simulations of the anisotropic dispersion of a Gaussian contaminant plume in porous media using the open source code DualSPHysics. Consistency of the SPH method is restored by increasing the spatial resolution along with the number of neighbours within the compact support of the interpolating kernel. The solution shows that as the number of neighbours is increased with resolution, full convergence of the numerical solutions is guaranteed regardless of the dispersivity. However, despite the restored consistency, negative concentrations, albeit at a lower level, are still present. This suggests that a compromise between the number of neighbours and the size of the smoothing length must be guaranteed such that sufficient implicit numerical diffusion remains to damp out unphysical oscillations.
△ Less
Submitted 21 August, 2021;
originally announced August 2021.
-
Creating and using large grids of pre-calculated model atmospheres for rapid analysis of stellar spectra
Authors:
Janos Zsargó,
Celia Rosa Fierro-Santillán,
Jaime Klapp,
Anabel Arrieta,
Lorena Arias,
Jurij Mendoza Valencia,
Leonardo Di G. Sigalotti
Abstract:
We present a database of 45,000 atmospheric models (which will become 80,000 models by the end of the project) with stellar masses between 9 and 120 M$_{\odot}$, covering the region of the OB main sequence and W-R stars in the H-R diagram. The models were calculated using the ABACUS I supercomputer and the stellar atmosphere code CMFGEN. The parameter space has 6 dimensions: the effective temperat…
▽ More
We present a database of 45,000 atmospheric models (which will become 80,000 models by the end of the project) with stellar masses between 9 and 120 M$_{\odot}$, covering the region of the OB main sequence and W-R stars in the H-R diagram. The models were calculated using the ABACUS I supercomputer and the stellar atmosphere code CMFGEN. The parameter space has 6 dimensions: the effective temperature $T_{\rm eff}$, the luminosity $L$, the metallicity $Z$, and three stellar wind parameters, namely the exponent $β$, the terminal velocity $V_{\infty}$, and the volume filling factor $F_{cl}$. For each model, we also calculate synthetic spectra in the UV (900-2000 Angstroms), optical (3500-7000 Angstroms), and near IR (10000-30000 Angstroms) regions. To facilitate comparison with observations, the synthetic spectra were rotationally broaden using ROTIN3, by covering $v$ sin $i$ velocities between 10 and 350 km/s with steps of 10 km/s, resulting in a library of 1 575 000 synthetic spectra. In order to demonstrate the benefits of employing the databases of pre-calculated models, we also present the results of the re-analysis of $ε$ Ori by using our grid.
△ Less
Submitted 30 July, 2021;
originally announced July 2021.
-
SPH simulations of turbulent flow in curved pipes with different geometries. A comparison with experiments
Authors:
C. E. Alvarado-Rodriguez,
L. Di G. Sigalotti,
J. Klapp,
C. R. Fierro-Santillan,
F. Aragon,
A. R. Uribe-Ramirez
Abstract:
The swirling secondary flow in curved pipes is studied in three-space dimensions using a weakly compressible Smoothed Particle Hydrodynamics (WCSPH) formulation coupled to new non-reflecting outflow boundary conditions. A large-eddy simulation (LES) model for turbulence is benchmarked with existing experimental data. After validation of the present model against experimental results for a 90 grade…
▽ More
The swirling secondary flow in curved pipes is studied in three-space dimensions using a weakly compressible Smoothed Particle Hydrodynamics (WCSPH) formulation coupled to new non-reflecting outflow boundary conditions. A large-eddy simulation (LES) model for turbulence is benchmarked with existing experimental data. After validation of the present model against experimental results for a 90 grades pipe bend, a detailed numerical study aimed at reproducing experimental flow measurements for a wide range of Reynolds numbers has been performed for different pipe geometries, including U pipe bends, S-shaped pipes and helically coiled pipes. In all cases, the SPH calculated behavior shows reasonably good agreement with the measurements across and downstream the bend in terms of streamwise velocity profiles and cross-sectional contours. Maximum mean-root-square deviations from the experimentally obtained profiles are always less than 1.8%. This combined with the very good matching between the SPH and the experimental cross-sectional contours shows the uprising capabilities of the present scheme for handling engineering applications with streamline curvature, such as flows in bends and manifolds.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Algorithm for removing secondary lines blended with Balmer lines in synthetic spectra of massive stars
Authors:
Celia Rosa Fierro-Santillán,
Jaime Klapp,
Leonardo Di G. Sigalotti,
Janos Zsargó
Abstract:
In order to measure automatically the equivalent width of the Balmer lines in a database of 40,000 atmosphere models, we have developed a program that mimics the work of an astronomer in terms of identifying and eliminating secondary spectral lines mixed with the Balmer lines. The equivalent widths measured have average errors of 5 percent, which makes them very reliable. As part of the FITspec co…
▽ More
In order to measure automatically the equivalent width of the Balmer lines in a database of 40,000 atmosphere models, we have developed a program that mimics the work of an astronomer in terms of identifying and eliminating secondary spectral lines mixed with the Balmer lines. The equivalent widths measured have average errors of 5 percent, which makes them very reliable. As part of the FITspec code, this program improves the automatic adjustment of an atmosphere model to the observed spectrum of a massive star.
△ Less
Submitted 1 August, 2021; v1 submitted 27 July, 2021;
originally announced July 2021.
-
SPH modeling of natural convection around a heated horizontal cylinder: A comparison with experiments
Authors:
F. Aragón,
J. E. V. Guzmán,
L. Di G. Sigalotti,
J. Klapp,
C. E. Alvarado-Rodríguez,
I. Carvajal-Mariscal,
A. R. Uribe-Ramírez
Abstract:
An experimental and numerical smoothed particle hydrodynamics (SPH) analysis was performed for the convective flow arising from a horizontal, thin cylindrical heat source enclosed in a glycerin-filled, slender enclosure at low Rayleigh numbers ($1.18\leq {\rm Ra}\leq 242$). Both the experiments and the SPH calculations were performed for positive ($0.1\leqΔT\leq 10$ K) and negative (…
▽ More
An experimental and numerical smoothed particle hydrodynamics (SPH) analysis was performed for the convective flow arising from a horizontal, thin cylindrical heat source enclosed in a glycerin-filled, slender enclosure at low Rayleigh numbers ($1.18\leq {\rm Ra}\leq 242$). Both the experiments and the SPH calculations were performed for positive ($0.1\leqΔT\leq 10$ K) and negative ($-10\leqΔT\leq -0.1$ K) temperature differences between the source and the surrounding fluid. In all cases a pair of steady, counter-rotating vortices is formed, accompanied by a plume of vertically ascending flow just above the source for $ΔT>0$ and a vertically descending flow just below the source for $ΔT<0$. The maximum flow velocities always occur within the ascending/descending plumes. The SPH predictions are found to match the experimental observations acceptably well with root-mean-square errors in the velocity profiles of the order of $\sim 10^{-5}$ m s$^{-1}$. The fact that the SPH method is able to reveal the detailed features of the flow phenomenon demonstrates the correctness of the approach.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
Creating and using large grids of precalculated model atmospheres for a rapid analysis of stellar spectra
Authors:
J. Zsargo,
C. R. Fierro-Santillan,
J. Klapp,
A. Arrieta,
L. Arias,
J. M. Valencia,
L. Di G. Sigalotti,
M. Hareter,
R. E. Puebla
Abstract:
$Aims.$ We present a database of 43,340 atmospheric models ($\sim$80,000 models at the conclusion of the project) for stars with stellar masses between 9 and 120 $M_{\odot}$, covering the region of the OB main-sequence and Wolf-Rayet (W-R) stars in the Hertzsprung--Russell (H--R) diagram.
$Methods.…
▽ More
$Aims.$ We present a database of 43,340 atmospheric models ($\sim$80,000 models at the conclusion of the project) for stars with stellar masses between 9 and 120 $M_{\odot}$, covering the region of the OB main-sequence and Wolf-Rayet (W-R) stars in the Hertzsprung--Russell (H--R) diagram.
$Methods.$ The models were calculated using the ABACUS I supercomputer and the stellar atmosphere code CMFGEN.
$Results.$ The parameter space has six dimensions: the effective temperature $T_{eff}$, the luminosity $L$, the metallicity $Z$, and three stellar wind parameters: the exponent $β$, the terminal velocity $V_{\infty}$, and the volume filling factor $F_{cl}$. For each model, we also calculate synthetic spectra in the UV (900-2000 A), optical (3500-7000 A), and near-IR (10000-40000 A) regions. To facilitate comparison with observations, the synthetic spectra can be rotationally broadened using ROTIN3, by covering vsin(i) velocities between 10 and 350 km s$^{-1}$ with steps of 10 km s$^{-1}$.
$Conclusions.$ We also present the results of the reanalysis of $ε$ Ori using our grid to demonstrate the benefits of databases of precalculated models. Our analysis succeeded in reproducing the best-fit parameter ranges of the original study, although our results favor the higher end of the mass-loss range and a lower level of clum**. Our results indirectly suggest that the resonance lines in the UV range are strongly affected by the velocity-space porosity, as has been suggested by recent theoretical calculations and numerical simulations.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Numerical Study of the Mixing Process of Unconfined Diffusion Flame in a Laminar to Transition-to-Turbulent Regime in a Four-Port Array Burner
Authors:
M. De la Cruz-Ávila,
J. E. De León-Ruiz,
E. Martínez-Espinosa,
I. Carvajal-Mariscal,
L. Di G. Sigalotti
Abstract:
The mixing process of multiple jets of liquefied petroleum gas and air in a diffusion flame is numerically analysed. The case study considers a four-port array burner where the fuel is injected by four peripheral nozzles and mixed with the surrounding air. Simulations are conducted with the Reynolds-Averaged Navier-Stokes technique, and the turbulence effect is modelled with the realizable k-e mod…
▽ More
The mixing process of multiple jets of liquefied petroleum gas and air in a diffusion flame is numerically analysed. The case study considers a four-port array burner where the fuel is injected by four peripheral nozzles and mixed with the surrounding air. Simulations are conducted with the Reynolds-Averaged Navier-Stokes technique, and the turbulence effect is modelled with the realizable k-e model. In addition, the eddy dissipation model is implemented to calculate the effect of the turbulent chemical reaction rate. Results show that the essential mixture mechanism occurs within a flame cone derived from the fuel jets interaction. However, the mixing process is driven by jets drag allowing an air/fuel smooth mixture to reach the flammability limits at two zones: one at a lower location or close to the burner surface and a second before the flame front development. The entire mixing mechanism culminates with the development of the flame necking cone. Any air concentration that falls into the cone radius will be entrained, contributing to the overall flame structure. Since the cone radius reach is limited only by radial distance of the jet array and the nozzles distance, the flame heights, consequently, depend solely on fuel mass flow.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Image Convolution-Based Method and Statistical Modelling for Experimental Height Estimations of Laminar to Transition-to-Turbulent Regime Diffusion Flames
Authors:
M. De La Cruz-Ávila,
J. E. De León-Ruiz,
I. Carvajal-Mariscal,
F. Peña-Polo,
L. Di G. Sigalotti
Abstract:
This paper presents an experimental methodology to measure the height of the flame using convolution image processing and statistical analysis. The experimental setup employs a burner with four circularly arranged nozzles. Six different volumetric fuel flows were employed, and flame images were captured from three different visualization planes utilizing a three high-definition camera array, a the…
▽ More
This paper presents an experimental methodology to measure the height of the flame using convolution image processing and statistical analysis. The experimental setup employs a burner with four circularly arranged nozzles. Six different volumetric fuel flows were employed, and flame images were captured from three different visualization planes utilizing a three high-definition camera array, a thermal imaging camera and an image-processing algorithm. The flame height was indirectly measured using pixel quantification and conversion through a reference length. Although the fuel flow was the most significant factor, the visualization plane and the image source were also found to be particularly relevant, since certain flame features were only perceivable depending on the approach. The measurements were compared to different existing theoretical correlations, yielding an overall adjustment ranging from 3.25 to 3.97cm. The present methodology yields an overall statistical tolerance of 1.27 cm and an expanded uncertainty of 0.599 cm. Furthermore, the thermal imaging has revealed a consistent difference in the overall luminous observable flame of 2.54 cm. For this particular burner configuration, correlations were derived by statistical modelling, which explain the flame height fluctuations with an average setting of 97.23%.
△ Less
Submitted 7 September, 2020; v1 submitted 31 August, 2020;
originally announced August 2020.
-
Luminous Flame Height Correlation Based on Fuel Mass Flow for a Laminar to Transition-to-Turbulent Regime Diffusion Flame
Authors:
M. De la Cruz-Ávila,
J. E. De León-Ruiz,
I. Carvajal-Mariscal,
G. Polupan,
L. Di G. Sigalotti
Abstract:
This paper presents a flame-height correlation for laminar to transition-to-turbulent regime diffusion flames. Flame-height measurements are obtained by means of numerical and experimental studies in which three high definition cameras were employed to take frontal, lateral and 45° angled images simultaneously. The images were analysed using an image-processing algorithm to determine the flame-hei…
▽ More
This paper presents a flame-height correlation for laminar to transition-to-turbulent regime diffusion flames. Flame-height measurements are obtained by means of numerical and experimental studies in which three high definition cameras were employed to take frontal, lateral and 45° angled images simultaneously. The images were analysed using an image-processing algorithm to determine the flame-height through indirect measurement. To locate an overall chemical-flame-length, numerical simulations were conducted with the unsteady Reynolds-Averaged Navier-Stokes technique. The eddy-dissipation model was also implemented to calculate chemical reaction rate. The experiments show that this proposed correlation has an adjustment variation of luminous flame-height for the laminar regime of 16.9%, which indicates that, without the use of the intermittent buoyant flame-height correlation, it globally best represents the flame-height in this regime. For the laminar and transition-to-turbulence regime the adjustment variations are 5.54% compared to the most accepted flame-height correlations, thus providing an acceptably good fitting. The numerical results show that the proposed range for the chemical-flame-length is located between the luminous and flickering flame zone compared to the experimental flame images. These results agree with the chemical length zone reported in the literature. Therefore, the correlation can be used for laminar and transition-to-turbulent combustion regimes.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Radiative non-isothermal Bondi accretion onto a massive black hole
Authors:
J. M. Ramirez-Velasquez,
L. Di G. Sigalotti,
R. Gabbasov,
F. Cruz,
J. Klapp,
Ernesto Contreras
Abstract:
In this paper, we present the classical Bondi accretion theory for the case of non-isothermal accretion processes onto a supermassive black hole (SMBH), including the effects of X-ray heating and the radiation force due to electron scattering and spectral lines. The radiation field is calculated by considering an optically thick, geometrically thin, standard accretion disk as the emitter of UV pho…
▽ More
In this paper, we present the classical Bondi accretion theory for the case of non-isothermal accretion processes onto a supermassive black hole (SMBH), including the effects of X-ray heating and the radiation force due to electron scattering and spectral lines. The radiation field is calculated by considering an optically thick, geometrically thin, standard accretion disk as the emitter of UV photons and a spherical central object as a source of X-ray emission. In the present analysis, the UV emission from the accretion disk is assumed to have an angular dependence, while the X-ray/central object radiation is assumed to be isotropic. This allows us to build streamlines in any angular direction we need to. The influence of both types of radiation is evaluated for different flux fractions of the X-ray and UV emissions with and without the effects of spectral line driving. We find that the radiation emitted near the SMBH interacts with the infalling matter and modifies the accretion dynamics. In the presence of line driving, a transition resembles from pure type 1 & 2 to type 5 solutions (see Fig2.1 of Frank etal. 2002), which takes place regardless of whether or not the UV emission dominates over the X-ray emission. We compute the radiative factors at which this transition occurs, and discard type 5 solution from all our models. Estimated values of the accretion radius and accretion rate in terms of the classical Bondi values are also given. The results are useful for the construction of proper initial conditions for time-dependent hydrodynamical simulations of accretion flows onto SMBH at the centre of galaxies.
△ Less
Submitted 11 September, 2019; v1 submitted 22 January, 2019;
originally announced February 2019.
-
FIT{\it spec}: a new algorithm for the automated fit of synthetic stellar spectra for OB stars
Authors:
Celia R. Fierro-Santillán,
Janos Zsargó,
Jaime Klapp,
Santiago A. Díaz-Azuara,
Anabel Arrieta,
Lorena Arias,
Leonardo Di G. Sigalotti
Abstract:
In this paper we describe the FIT\textit{spec} code, a data mining tool for the automatic fitting of synthetic stellar spectra. The program uses a database of 27\,000 {\sc cmfgen} models of stellar atmospheres arranged in a six-dimensional (6D) space, where each dimension corresponds to one model parameter. From these models a library of 2\,835\,000 synthetic spectra were generated covering the ul…
▽ More
In this paper we describe the FIT\textit{spec} code, a data mining tool for the automatic fitting of synthetic stellar spectra. The program uses a database of 27\,000 {\sc cmfgen} models of stellar atmospheres arranged in a six-dimensional (6D) space, where each dimension corresponds to one model parameter. From these models a library of 2\,835\,000 synthetic spectra were generated covering the ultraviolet, optical, and infrared region of the electromagnetic spectrum. Using FIT\textit{spec} we adjust the effective temperature and the surface gravity. From the 6D array we also get the luminosity, the metallicity, and three parameters for the stellar wind: the terminal velocity ($v_\infty$), the $β$ exponent of the velocity law, and the clum** filling factor ($F_{\rm cl}$). Finally, the projected rotational velocity ($v\cdot\sin i$) can be obtained from the library of stellar spectra. Validation of the algorithm was performed by analyzing the spectra of a sample of eight O-type stars taken from the {\sc iacob} spectroscopic survey of Northern Galactic OB stars. The spectral lines used for the adjustment of the analyzed stars are reproduced with good accuracy. In particular, the effective temperatures calculated with the FIT\textit{spec} are in good agreement with those derived from spectral type and other calibrations for the same stars. The stellar luminosities and projected rotational velocities are also in good agreement with previous quantitative spectroscopic analyses in the literature. An important advantage of FIT\textit{spec} over traditional codes is that the time required for spectral analyses is reduced from months to a few hours.
△ Less
Submitted 30 March, 2018;
originally announced April 2018.
-
Impetus: Consistent SPH calculations of 3D spherical Bondi accretion onto a black hole
Authors:
J. M. Ramirez-Velasquez,
L. Di G. Sigalotti,
R. Gabbasov,
F. Cruz,
J. Klapp
Abstract:
We present three-dimensional calculations of spherically symmetric Bondi accretion onto a stationary supermassive black hole (SMBH) of mass $10^{8}$ $M_{\odot}$ within a radial range of $0.02-10$ pc, using a modified version of the smoothed particle hydrodynamics (SPH) \gad \sp code, which ensures approximate first-order consistency (i.e., second-order accuracy) for the particle approximation. Fir…
▽ More
We present three-dimensional calculations of spherically symmetric Bondi accretion onto a stationary supermassive black hole (SMBH) of mass $10^{8}$ $M_{\odot}$ within a radial range of $0.02-10$ pc, using a modified version of the smoothed particle hydrodynamics (SPH) \gad \sp code, which ensures approximate first-order consistency (i.e., second-order accuracy) for the particle approximation. First-order consistency is restored by allowing the number of neighbours, $n_{\rm neigh}$, and the smoothing length, $h$, to vary with the total number of particles, $N$, such that the asymptotic limits $n_{\rm neigh}\to\infty$ and $h\to 0$ hold as $N\to\infty$. The ability of the method to reproduce the isothermal ($γ=1$) and adiabatic ($γ=5/3$) Bondi accretion is investigated with increased spatial resolution. In particular, for the isothermal models the numerical radial profiles closely match the Bondi solution, except near the accretor, where the density and radial velocity are slightly underestimated. However, as $n_{\rm neigh}$ is increased and $h$ is decreased, the calculations approach first-order consistency and the deviations from the Bondi solution decrease. The density and radial velocity profiles for the adiabatic models are qualitatively similar to those for the isothermal Bondi accretion. Steady-state Bondi accretion is reproduced by the highly resolved consistent models with a percent relative error of $\lesssim 1$\% for $γ=1$ and $\sim 9$\% for $γ=5/3$, with the adiabatic accretion taking longer than the isothermal case to reach steady flow. The performance of the method is assessed by comparing the results with those obtained using the standard Gadget and the Gizmo codes.
△ Less
Submitted 30 March, 2018;
originally announced March 2018.
-
From large-scale to protostellar disk fragmentation into close binary stars
Authors:
Leonardo Di G. Sigalotti,
Fidel Cruz,
Ruslan Gabbasov,
Jaime Klapp,
José Ramírez-Velasquez
Abstract:
Recent observations of young stellar systems with the Atacama Large Millimeter/submillimeter Array (ALMA) and the Karl G. Jansky Very Large Array (VLA) are hel** to cement the idea that close companion stars form via fragmentation of a gravitationally unstable disk around a protostar early in the star formation process. As the disk grows in mass, it eventually becomes gravitationally unstable an…
▽ More
Recent observations of young stellar systems with the Atacama Large Millimeter/submillimeter Array (ALMA) and the Karl G. Jansky Very Large Array (VLA) are hel** to cement the idea that close companion stars form via fragmentation of a gravitationally unstable disk around a protostar early in the star formation process. As the disk grows in mass, it eventually becomes gravitationally unstable and fragments, forming one or more new protostars in orbit with the first at mean separations of 100 astronomical units (AU) or even less. Here we report direct numerical calculations down to scales as small as $\sim 0.1$ AU, using a consistent Smoothed Particle Hydrodynamics (SPH) code, that show the large-scale fragmentation of a cloud core into two protostars accompanied by small-scale fragmentation of their circumstellar disks. Our results demonstrate the two dominant mechanisms of star formation, where the disk forming around a protostar, which in turn results from the large-scale fragmentation of the cloud core, undergoes eccentric ($m=1$) fragmentation to produce a close binary. We generate two-dimensional emission maps and simulated ALMA 1.3 mm continuum images of the structure and fragmentation of the disks that can help explain the dynamical processes occurring within collapsing cloud cores.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
Nonreflecting outlet boundary conditions for incompressible flows using SPH
Authors:
Carlos E. Alvarado-Rodríguez,
Jaime Klapp,
Leonardo Di G. Sigalotti,
José M. Domínguez,
Eduardo de la Cruz Sánchez
Abstract:
In this paper we implement a simple strategy, based on ** and Braza's method, to deal with nonreflecting outlet boundary conditions for incompressible Navier-Stokes flows using the method of smoothed particle hydrodynamics (SPH). The outflow boundary conditions are implemented using an outflow zone downstream of the outlet, where particles are moved using an outgoing wave equation for the velocit…
▽ More
In this paper we implement a simple strategy, based on ** and Braza's method, to deal with nonreflecting outlet boundary conditions for incompressible Navier-Stokes flows using the method of smoothed particle hydrodynamics (SPH). The outflow boundary conditions are implemented using an outflow zone downstream of the outlet, where particles are moved using an outgoing wave equation for the velocity field so that feedback noise from the outlet boundary is greatly reduced. For unidirectional flow across the outlet, this condition reduces to Orlanski's wave equation. The performance of the method is demonstrated through several two-dimensional test problems, including unsteady, plane Poiseuille flow, flow between two inclined plates, the Kelvin-Helmholtz instability in a channel, and flow in a constricted conduit, and in three-dimensions for turbulent flow in a $90^{\circ}$ section of a curved square pipe. The results show that spurious waves incident from the outlet are effectively absorbed and that steady-state laminar flows can be maintained for much longer times compared to periodic boundary conditions. In addition, time-dependent anisotropies in the flow, like fluid recirculations, are convected across the outlet in a very stable and accurate manner.
△ Less
Submitted 26 September, 2017;
originally announced September 2017.
-
Consistent SPH Simulations of Protostellar Collapse and Fragmentation
Authors:
Ruslan Gabbasov,
Leonardo Di G. Sigalotti,
Fidel Cruz,
J. Klapp,
J. M. Ramírez-Velasquez
Abstract:
We study the consistency and convergence of smoothed particle hydrodynamics (SPH), as a function of the interpolation parameters, namely the number of particles $N$, the number of neighbors $n$, and the smoothing length $h$, using simulations of the collapse and fragmentation of protostellar rotating cores. The calculations are made using a modified version of the GADGET-2 code that employs an imp…
▽ More
We study the consistency and convergence of smoothed particle hydrodynamics (SPH), as a function of the interpolation parameters, namely the number of particles $N$, the number of neighbors $n$, and the smoothing length $h$, using simulations of the collapse and fragmentation of protostellar rotating cores. The calculations are made using a modified version of the GADGET-2 code that employs an improved scheme for the artificial viscosity and power-law dependences of $n$ and $h$ on $N$, as was recently proposed by Zhu et al., which comply with the combined limit $N\to\infty$, $h\to 0$, and $n\to\infty$ with $n/N\to 0$ for full SPH consistency, as the domain resolution is increased. We apply this realization to the "standard isothermal test case" in the variant calculated by Burkert & Bodenheimer and the Gaussian cloud model of Boss to investigate the response of the method to adaptive smoothing lengths in the presence of large density and pressure gradients. The degree of consistency is measured by tracking how well the estimates of the consistency integral relations reproduce their continuous counterparts. In particular, $C^{0}$ and $C^{1}$ particle consistency is demonstrated, meaning that the calculations are close to second-order accuracy. As long as $n$ is increased with $N$, mass resolution also improves as the minimum resolvable mass $M_{\rm min}\sim n^{-1}$. This aspect allows proper calculation of small-scale structures in the flow associated with the formation and instability of protostellar disks around the growing fragments, which are seen to develop a spiral structure and fragment into close binary/multiple systems as supported by recent observations.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Autonomous choices among deterministic evolution-laws as source of uncertainty
Authors:
L. Trujillo,
A. Meyroneinc,
K. Campos,
O. Rendon,
L. Di G. Sigalotti
Abstract:
We provide evidence of an extreme form of sensitivity to initial conditions in a family of one-dimensional self-ruling dynamical systems. We prove that some hyperchaotic sequences are closed-form expressions of the orbits of these pseudo-random dynamical systems. Each chaotic system in this family exhibits a sensitivity to initial conditions that encompasses the sequence of choices of the evolutio…
▽ More
We provide evidence of an extreme form of sensitivity to initial conditions in a family of one-dimensional self-ruling dynamical systems. We prove that some hyperchaotic sequences are closed-form expressions of the orbits of these pseudo-random dynamical systems. Each chaotic system in this family exhibits a sensitivity to initial conditions that encompasses the sequence of choices of the evolution rule in some collection of maps. This opens a possibility to extend current theories of complex behaviors on the basis of intrinsic uncertainty in deterministic chaos.
△ Less
Submitted 5 September, 2017; v1 submitted 5 November, 2016;
originally announced November 2016.
-
A new insight into the consistency of smoothed particle hydrodynamics
Authors:
Leonardo Di G. Sigalotti,
Otto Rendón,
Jaime Klapp,
Carlos A. Vargas,
Kilver Campos
Abstract:
In this paper the problem of consistency of smoothed particle hydrodynamics (SPH) is solved. A novel error analysis is developed in $n$-dimensional space using the Poisson summation formula, which enables the treatment of the kernel and particle approximation errors in combined fashion. New consistency integral relations are derived for the particle approximation which correspond to the cosine Fou…
▽ More
In this paper the problem of consistency of smoothed particle hydrodynamics (SPH) is solved. A novel error analysis is developed in $n$-dimensional space using the Poisson summation formula, which enables the treatment of the kernel and particle approximation errors in combined fashion. New consistency integral relations are derived for the particle approximation which correspond to the cosine Fourier transform of the classically known consistency conditions for the kernel approximation. The functional dependence of the error bounds on the SPH interpolation parameters, namely the smoothing length $h$ and the number of particles within the kernel support ${\cal{N}}$ is demonstrated explicitly from which consistency conditions are seen to follow naturally. As ${\cal{N}}\to\infty$, the particle approximation converges to the kernel approximation independently of $h$ provided that the particle mass scales with $h$ as $m\propto h^β$, with $β>n$. This implies that as $h\to 0$, the joint limit $m\to 0$, ${\cal{N}}\to\infty$, and $N\to\infty$ is necessary for complete convergence to the continuum, where $N$ is the total number of particles. The analysis also reveals the presence of a dominant error term of the form $(\ln {\cal{N}})^{n}/{\cal{N}}$, which tends asymptotically to $1/{\cal{N}}$ when ${\cal{N}}\gg 1$, as it has long been conjectured based on the similarity between the SPH and the quasi-Monte Carlo estimates.
△ Less
Submitted 8 April, 2019; v1 submitted 20 August, 2016;
originally announced August 2016.
-
IMPETUS: New Cloudy's radiative tables for accretion onto a galaxy black hole
Authors:
Jose M. Ramirez-Velasquez,
Jaime Klapp,
Ruslan Gabbasov,
Fidel Cruz,
Leonardo Di G. Sigalotti
Abstract:
We present digital tables for the radiative terms that appear in the energy and momentum equations used to simulate the accretion onto supermassive black holes (SMBHs) in the center of galaxies. Cooling and heating rates and radiative accelerations are calculated with two different Spectral Energy Distributions (SEDs). One SED is composed of an accretion disk + [X-ray]-powerlaw, while the other is…
▽ More
We present digital tables for the radiative terms that appear in the energy and momentum equations used to simulate the accretion onto supermassive black holes (SMBHs) in the center of galaxies. Cooling and heating rates and radiative accelerations are calculated with two different Spectral Energy Distributions (SEDs). One SED is composed of an accretion disk + [X-ray]-powerlaw, while the other is made of an accretion disk + [Corona]-bremsstrahlung with $T_X=1.16 \times 10^8$ K, where precomputed conditions of adiabatic expansion are included. Quantification of different physical mechanisms at operation are presented, showing discrepancies and similarities between both SEDs in different ranges of fundamental physical parameters (i.e., ionization parameter, density, and temperature). With the recent discovery of outflows originating at sub-parsec scales, these tables may provide a useful tool to model gas accretion processes onto a SMBH.
△ Less
Submitted 2 August, 2016; v1 submitted 26 July, 2016;
originally announced July 2016.
-
On the kernel and particle consistency in smoothed particle hydrodynamics
Authors:
Leonardo Di G. Sigalotti,
Jaime Klapp,
Otto Rendón,
Carlos A. Vargas,
Franklin Peña-Polo
Abstract:
The problem of consistency of smoothed particle hydrodynamics (SPH) has demanded considerable attention in the past few years due to the ever increasing number of applications of the method in many areas of science and engineering. A loss of consistency leads to an inevitable loss of approximation accuracy. In this paper, we revisit the issue of SPH kernel and particle consistency and demonstrate…
▽ More
The problem of consistency of smoothed particle hydrodynamics (SPH) has demanded considerable attention in the past few years due to the ever increasing number of applications of the method in many areas of science and engineering. A loss of consistency leads to an inevitable loss of approximation accuracy. In this paper, we revisit the issue of SPH kernel and particle consistency and demonstrate that SPH has a limiting second-order convergence rate. Numerical experiments with suitably chosen test functions validate this conclusion. In particular, we find that when using the root mean square error as a model evaluation statistics, well-known corrective SPH schemes, which were thought to converge to second, or even higher order, are actually first-order accurate, or at best close to second order. We also find that observing the joint limit when $N\to\infty$, $h\to 0$, and $n\to\infty$, as was recently proposed by Zhu et al., where $N$ is the total number of particles, $h$ is the smoothing length, and $n$ is the number of neighbor particles, standard SPH restores full $C^{0}$ particle consistency for both the estimates of the function and its derivatives and becomes insensitive to particle disorder.
△ Less
Submitted 14 May, 2016;
originally announced May 2016.
-
Numerical simulations of the Kelvin-Helmholtz instability with the Gadget-2 SPH code
Authors:
Ruslan F. Gabbasov,
Jaime Klapp-Escribano,
Joel Suarez-Cansino,
Leonardo Di G. Sigalotti
Abstract:
The method of Smoothed Particle Hydrodynamics (SPH) has been widely studied and implemented for a large variety of problems, ranging from astrophysics to fluid dynamics and elasticity problems in solids. However, the method is known to have several deficiencies and discrepancies in comparison with traditional mesh-based codes. In particular, there has been a discussion about its ability to reprodu…
▽ More
The method of Smoothed Particle Hydrodynamics (SPH) has been widely studied and implemented for a large variety of problems, ranging from astrophysics to fluid dynamics and elasticity problems in solids. However, the method is known to have several deficiencies and discrepancies in comparison with traditional mesh-based codes. In particular, there has been a discussion about its ability to reproduce the Kelvin-Helmholtz Instability in shearing flows. Several authors reported that they were able to reproduce correctly the instability by introducing some improvements to the algorithm. In this contribution, we compare the results of Read et al. (2010) implementation of the SPH algorithm with the original Gadget-2 N-body/SPH code.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.
-
CXCR6, a Newly Defined Biomarker of Tissue-Specific Stem Cell Asymmetric Self-Renewal, Identifies More Aggressive Human Melanoma Cancer Stem Cells
Authors:
Rouzbeh Taghizadeh,
Minsoo Noh,
Yang Hoon Huh,
Emilio Ciusani,
Luca Sigalotti,
Michele Maio,
Beatrice Arosio,
Maria R. Nicotra,
PierGiorgio Natali,
James L. Sherley,
Caterina A. M. La Porta
Abstract:
Background: A fundamental problem in cancer research is identifying the cell type that is capable of sustaining neoplastic growth and its origin from normal tissue cells. Recent investigations of a variety of tumor types have shown that phenotypically identifiable and isolable subfractions of cells possess the tumor-forming ability. In the present paper, using two lineage-related human melanoma ce…
▽ More
Background: A fundamental problem in cancer research is identifying the cell type that is capable of sustaining neoplastic growth and its origin from normal tissue cells. Recent investigations of a variety of tumor types have shown that phenotypically identifiable and isolable subfractions of cells possess the tumor-forming ability. In the present paper, using two lineage-related human melanoma cell lines, primary melanoma line IGR39 and its metastatic derivative line IGR37, two main observations are reported. The first one is the first phenotypic evidence to support the origin of melanoma cancer stem cells (CSCs) from mutated tissue-specific stem cells; and the second one is the identification of a more aggressive subpopulation of CSCs in melanoma that are CXCR6+. Conclusions/Significance: The association of a more aggressive tumor phenotype with asymmetric self-renewal phenotype reveals a previously unrecognized aspect of tumor cell physiology. Namely, the retention of some tissue-specific stem cell attributes, like the ability to asymmetrically self-renew, impacts the natural history of human tumor development. Knowledge of this new aspect of tumor development and progression may provide new targets for cancer prevention and treatment.
△ Less
Submitted 27 August, 2013;
originally announced August 2013.
-
Test Evolution of Non-Axisymmetric Gravitational Waves
Authors:
Leonardo Sigalotti,
Richard F. Stark
Abstract:
We give a preliminary report on one of the tests we have performed of a full non-axisymmetric general relativistic code. The test considered here concerns the numerical evolution of vacuum non-axisymmetric gravitational waves and their comparison at low amplitudes with theoretical waveforms obtained from linearised theory.
We give a preliminary report on one of the tests we have performed of a full non-axisymmetric general relativistic code. The test considered here concerns the numerical evolution of vacuum non-axisymmetric gravitational waves and their comparison at low amplitudes with theoretical waveforms obtained from linearised theory.
△ Less
Submitted 25 August, 1999;
originally announced August 1999.
