-
Hauser-Feshbach fission fragment de-excitation with calculated macroscopic-microscopic mass yields
Authors:
Patrick Jaffke,
Peter Moller,
Patrick Talou,
Arnold J. Sierk
Abstract:
The Hauser-Feshbach statistical model is applied to the de-excitation of primary fission fragments using input mass yields calculated with macroscopic-microscopic models of the potential energy surface. We test the sensitivity of the prompt fission observables to the input mass yields for two important reactions, $^{235}$U$(n_\mathrm{th},f)$ and $^{239}$Pu$(n_\mathrm{th},f)$, for which good experi…
▽ More
The Hauser-Feshbach statistical model is applied to the de-excitation of primary fission fragments using input mass yields calculated with macroscopic-microscopic models of the potential energy surface. We test the sensitivity of the prompt fission observables to the input mass yields for two important reactions, $^{235}$U$(n_\mathrm{th},f)$ and $^{239}$Pu$(n_\mathrm{th},f)$, for which good experimental data exist. General traits of the mass yields, such as the location of the peaks and their widths, can impact both the prompt neutron and $γ$-ray multiplicities, as well as their spectra. Specifically, we use several mass yields to determine a linear correlation between the calculated prompt neutron multiplicity $\barν$ and the average heavy-fragment mass $\langle A_h\rangle$ of the input mass yields $\partial\barν/\partial\langle A_h\rangle = \pm 0.1\,n/f/\mathrm{u}$. The mass peak width influences the correlation between the total kinetic energy of the fission fragments and the total number of prompt neutrons emitted $\barν_T(\mathrm{TKE})$. Typical biases on prompt particle observables from using calculated mass yields instead of experimental ones are: $δ\barν = 4\%$ for the average prompt neutron multiplicity, $δ\bar{M}_γ= 1\%$ for the average prompt $γ$-ray multiplicity, $δ\barε_n^\mathrm{LAB} = 1\%$ for the average outgoing neutron energy, $δ\barε_γ= 1\%$ for the average $γ$-ray energy, and $δ\langle\mathrm{TKE}\rangle = 0.4\%$ for the average total kinetic energy of the fission fragments.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Production of Energetic Light Fragments in CEM, LAQGSM, and MCNP6
Authors:
Stepan G. Mashnik,
Leslie M. Kerby,
Konstantin K. Gudima,
Arnold J. Sierk,
Jeffrey S. Bull,
Michael R. James
Abstract:
We extend the cascade-exciton model (CEM), and the Los Alamos version of the quark-gluon string model (LAQGSM), event generators of the Monte-Carlo N-particle transport code version 6 (MCNP6), to describe production of energetic light fragments (LF) heavier than 4He from various nuclear reactions induced by particles and nuclei at energies up to about 1 TeV/nucleon. In these models, energetic LF c…
▽ More
We extend the cascade-exciton model (CEM), and the Los Alamos version of the quark-gluon string model (LAQGSM), event generators of the Monte-Carlo N-particle transport code version 6 (MCNP6), to describe production of energetic light fragments (LF) heavier than 4He from various nuclear reactions induced by particles and nuclei at energies up to about 1 TeV/nucleon. In these models, energetic LF can be produced via Fermi break-up, preequilibrium emission, and coalescence of cascade particles. Initially, we study several variations of the Fermi break-up model and choose the best option for these models. Then, we extend the modified exciton model (MEM) used by these codes to account for a possibility of multiple emission of up to 66 types of particles and LF (up to 28Mg) at the preequilibrium stage of reactions. Then, we expand the coalescence model to allow coalescence of LF from nucleons emitted at the intranuclear cascade stage of reactions and from lighter clusters, up to fragments with mass numbers A < 8, in the case of CEM, and A < 13, in the case of LAQGSM. Next, we modify MCNP6 to allow calculating and outputting spectra of LF and heavier products with arbitrary mass and charge numbers. The improved version of CEM is implemented into MCNP6. Finally, we test the improved versions of CEM, LAQGSM, and MCNP6 on a variety of measured nuclear reactions. The modified codes give an improved description of energetic LF from particle- and nucleus-induced reactions; showing a good agreement with a variety of available experimental data. They have an improved predictive power compared to the previous versions and can be used as reliable tools in simulating applications involving such types of reactions.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
Energetic Light Fragment Production Capability in MCNP6
Authors:
Leslie M. Kerby,
Stepan G. Mashnik,
Konstantin K. Gudima,
Arnold J. Sierk,
Jeffrey S. Bull,
Michael R. James
Abstract:
The goal of this research is to enable MCNP6 to produce high-energy light fragments. These energetic light fragments may be emitted by our models through three processes: Fermi breakup, preequilibrium, and coalescence. We explore the emission of light fragments through each of these mechanisms and demonstrate an improved agreement with experimental data achieved by extending precompound models to…
▽ More
The goal of this research is to enable MCNP6 to produce high-energy light fragments. These energetic light fragments may be emitted by our models through three processes: Fermi breakup, preequilibrium, and coalescence. We explore the emission of light fragments through each of these mechanisms and demonstrate an improved agreement with experimental data achieved by extending precompound models to include emission of fragments heavier than $^4$He.
△ Less
Submitted 11 January, 2016;
originally announced January 2016.
-
Nuclear ground-state masses and deformations: FRDM(2012)
Authors:
P. Moller,
A. J. Sierk,
T. Ichikawa,
H. Sagawa
Abstract:
We tabulate the atomic mass excesses and binding energies, ground-state shell-plus-pairing corrections, ground-state microscopic corrections, and nuclear ground-state deformations of 9318 nuclei ranging from $^{16}$O to $A=339$. The calculations are based on the finite-range droplet macroscopic model and the folded-Yukawa single-particle microscopic model. Relative to our FRDM(1992) mass table in…
▽ More
We tabulate the atomic mass excesses and binding energies, ground-state shell-plus-pairing corrections, ground-state microscopic corrections, and nuclear ground-state deformations of 9318 nuclei ranging from $^{16}$O to $A=339$. The calculations are based on the finite-range droplet macroscopic model and the folded-Yukawa single-particle microscopic model. Relative to our FRDM(1992) mass table in {\sc Atomic Data and Nuclear Data Tables} [{\bf 59} 185 (1995)], the results are obtained in the same model, but with considerably improved treatment of deformation and fewer of the approximations that were necessary earlier, due to limitations in computer power. The more accurate execution of the model and the more extensive and more accurate experimental mass data base now available allows us to determine one additional macroscopic-model parameter, the density-symmetry coefficient $L$, which was not varied in the previous calculation, but set to zero. Because we now realize that the FRDM is inaccurate for some highly deformed shapes occurring in fission, because some effects are derived in terms of perturbations around a sphere, we only adjust its macroscopic parameters to ground-state masses. The values of ten constants are determined directly from an optimization to fit ground-state masses of 2149 nuclei ranging from $^{16}$O to $^{265}_{106}$Sg and $^{264}_{108}$Hs. The error of the mass model is 0.5595~MeV. We also provide masses in the FRLDM, which in the more accurate treatments now has an error of 0.6618 MeV. But in contrast to the FRDM, it is suitable for studies of fission and has been extensively so applied elsewhere, with FRLDM(2002) constants. The FRLDM(2012) fits 31 fission barrier heights from $^{70}$Se to $^{252}$Cf with a root-mean-square deviation of 1.052 MeV.
△ Less
Submitted 25 August, 2015;
originally announced August 2015.
-
Comparison of Expanded Preequilibrium CEM Model with CEM03.03 and Experimental Data, FY2013
Authors:
Leslie M. Kerby,
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
Emission of light fragments (LF) from nuclear reactions is an open question. Different reaction mechanisms contribute to their production; the relative roles of each, and how they change with incident energy, mass number of the target, and the type and emission energy of the fragments is not completely understood.
None of the available models are able to accurately predict emission of LF from ar…
▽ More
Emission of light fragments (LF) from nuclear reactions is an open question. Different reaction mechanisms contribute to their production; the relative roles of each, and how they change with incident energy, mass number of the target, and the type and emission energy of the fragments is not completely understood.
None of the available models are able to accurately predict emission of LF from arbitrary reactions. However, the ability to describe production of LF (especially at energies $\gtrsim 30$ MeV) from many reactions is important for different applications, such as cosmic-ray-induced Single Event Upsets (SEUs), radiation protection, and cancer therapy with proton and heavy-ion beams, to name just a few. The Cascade-Exciton Model (CEM) version 03.03 and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) version 03.03 event generators in Monte Carlo N-Particle Transport Code version 6 (MCNP6) describe quite well the spectra of fragments with sizes up to $^{4}$He across a broad range of target masses and incident energies (up to $\sim 5$ GeV for CEM and up to $\sim 1$ TeV/A for LAQGSM). However, they do not predict the high-energy tails of LF spectra heavier than $^4$He well. Most LF with energies above several tens of MeV are emitted during the precompound stage of a reaction. The current versions of the CEM and LAQGSM event generators do not account for precompound emission of LF larger than $^{4}$He.
The aim of our work is to extend the precompound model in them to include such processes, leading to an increase of predictive power of LF-production in MCNP6. Extending our models to include emission of fragments heavier than $^4$He at the precompound stage has already provided preliminary results that have much better agreement with experimental data.
△ Less
Submitted 17 January, 2014;
originally announced January 2014.
-
Production of Energetic Light Fragments in Spallation Reactions
Authors:
Stepan G. Mashnik,
Leslie M. Kerby,
Konstantin K. Gudima,
Arnold J. Sierk
Abstract:
Different reaction mechanisms contribute to the production of light fragments (LF) from nuclear reactions. Available models cannot accurately predict emission of LF from arbitrary reactions. However, the emission of LF is important for many applications, such as cosmic-ray-induced single event upsets, radiation protection, and cancer therapy with proton and heavy-ion beams, to name just a few. The…
▽ More
Different reaction mechanisms contribute to the production of light fragments (LF) from nuclear reactions. Available models cannot accurately predict emission of LF from arbitrary reactions. However, the emission of LF is important for many applications, such as cosmic-ray-induced single event upsets, radiation protection, and cancer therapy with proton and heavy-ion beams, to name just a few. The cascade-exciton model (CEM) and the Los Alamos version of the quark-gluon string model (LAQGSM), as implemented in the CEM03.03 and LAQGSM03.03 event generators used in the Los Alamos transport code MCNP6, describe quite well the spectra of fragments with sizes up to 4He across a broad range of target masses and incident energies. However, they do not predict high-energy tails for LF heavier than 4He. The standard versions of CEM and LAQGSM do not account for preequilibrium emission of LF larger than 4He. The aim of our work is to extend the preequilibrium model to include such processes. We do this by including the emission of fragments heavier than 4He at the preequilibrium stage, and using an improved version of the Fermi Break-up model, providing improved agreement with various experimental data.
△ Less
Submitted 27 June, 2013;
originally announced June 2013.
-
MCNP6 Study of Fragmentation Products from 112Sn + 112Sn and 124Sn + 124Sn at 1 GeV/nucleon
Authors:
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
Isotope production cross sections from 112Sn + 112Sn and 124Sn + 124Sn reactions at 1 GeV/nucleon, which were measured recently at GSI using the heavy-ion accelerator SIS18 and the Fragment Separator (FRS), have been analyzed with the latest Los Alamos Monte-Carlo transport code MCNP6 using the LAQGSM03.03 event generator. MCNP6 reproduces reasonably well all the measured cross sections. Compariso…
▽ More
Isotope production cross sections from 112Sn + 112Sn and 124Sn + 124Sn reactions at 1 GeV/nucleon, which were measured recently at GSI using the heavy-ion accelerator SIS18 and the Fragment Separator (FRS), have been analyzed with the latest Los Alamos Monte-Carlo transport code MCNP6 using the LAQGSM03.03 event generator. MCNP6 reproduces reasonably well all the measured cross sections. Comparison of the MCNP6 results with the measured data and with calculations by a modification of the Los Alamos version of the Quark-Gluon String Model allowing for multifragmentation processes in the framework of the Statistical Multifragmentation Model (SMM) by Botvina and coauthors, as realized in the code LAQGSM03.S1, does not suggest unambiguous evidence of a multifragmentation signature.
△ Less
Submitted 18 March, 2013;
originally announced March 2013.
-
Preequilibrium Emission of Light Fragments in Spallation Reactions
Authors:
Leslie M. Kerby,
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
The ability to describe production of light fragments (LF) is important for many applications, such as cosmic-ray-induced single event upsets (SEUs), radiation protection, and cancer therapy with proton and heavy-ion beams. The Cascade-Exciton Model (CEM) and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) event generators in the LANL transport code MCNP6, describe quite well the s…
▽ More
The ability to describe production of light fragments (LF) is important for many applications, such as cosmic-ray-induced single event upsets (SEUs), radiation protection, and cancer therapy with proton and heavy-ion beams. The Cascade-Exciton Model (CEM) and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) event generators in the LANL transport code MCNP6, describe quite well the spectra of fragments with sizes up to 4He across a broad range of target masses and incident energies (up to ~ 5 GeV for CEM and up to ~ 1 TeV/A for LAQGSM). However, they do not predict the high-energy tails of LF spectra heavier than 4He well. Most LF with energies above several tens of MeV are emitted during the precompound stage of a reaction. The current versions of our event generators do not account for precompound emission of LF larger than 4He. The aim of our work is to generalize the precompound model to include such processes, leading to increased predictive power of LF production. Extending the model in this way provides preliminary results that have much better agreement with experimental data.
△ Less
Submitted 18 March, 2013;
originally announced March 2013.
-
MCNP6 Fission Cross Section Calculations at Intermediate and High Energies
Authors:
Stepan G. Mashnik,
Arnold J. Sierk,
Richard E. Prael
Abstract:
MCNP6 has been Validated and Verified (V&V) against intermediate- and high-energy fission cross-section experimental data. An error in the calculation of fission cross sections of 181Ta and a few nearby target nuclei by the CEM03.03 event generator in MCNP6 and a "bug: in the calculation of fission cross sections with the GENXS option of MCNP6 while using the LAQGSM03.03 event generator were detec…
▽ More
MCNP6 has been Validated and Verified (V&V) against intermediate- and high-energy fission cross-section experimental data. An error in the calculation of fission cross sections of 181Ta and a few nearby target nuclei by the CEM03.03 event generator in MCNP6 and a "bug: in the calculation of fission cross sections with the GENXS option of MCNP6 while using the LAQGSM03.03 event generator were detected during our V&V work. After fixing both problems, we find that MCNP6 using CEM03.03 and LAQGSM03.03 calculates fission cross sections in good agreement with available experimental data for reactions induced by nucleons, pions, and photons on both subactinide and actinide nuclei at incident energies from several tens of MeV to about 1 TeV.
△ Less
Submitted 18 March, 2013;
originally announced March 2013.
-
The character and prevalence of third minima in actinide fission barriers
Authors:
Takatoshi Ichikawa,
Peter Möller,
Arnold J Sierk
Abstract:
The double-humped structure of many actinide fission barriers is well established both experimentally and theoretically. There is also evidence, both experimental and theoretical, that some actinide nuclei have barriers with a third minimum, outside the second, fission-isomeric minimum. We perform a large-scale, systematic calculation of actinide fission barriers to identify which actinide nuclei…
▽ More
The double-humped structure of many actinide fission barriers is well established both experimentally and theoretically. There is also evidence, both experimental and theoretical, that some actinide nuclei have barriers with a third minimum, outside the second, fission-isomeric minimum. We perform a large-scale, systematic calculation of actinide fission barriers to identify which actinide nuclei exhibit third minima. We find that only a relatively few nuclei accessible to experiment exhibit third minima in their barriers, approximately nuclei with proton number $Z$ in the range $88 \leq Z \leq 94$ and nucleon number $A$ in the range $230 \leq A \leq 236 $. We find that the third minimum is less than 1 MeV deep for light Th and U isotopes. This is consistent with some previous experimental and theoretical results, but differs from some others. We discuss possible origins of these incompatible results and what are the most realistic predictions of where third minima are observable.
△ Less
Submitted 28 February, 2013;
originally announced March 2013.
-
Current status of MCNP6 as a simulation tool useful for space and accelerator applications
Authors:
S. G. Mashnik,
J. S. Bull,
H. G. Hughes,
R. E. Prael,
A. J. Sierk
Abstract:
For the past several years, a major effort has been undertaken at Los Alamos National Laboratory (LANL) to develop the transport code MCNP6, the latest LANL Monte-Carlo transport code representing a merger and improvement of MCNP5 and MCNPX. We emphasize a description of the latest developments of MCNP6 at higher energies to improve its reliability in calculating rare-isotope production, high-ener…
▽ More
For the past several years, a major effort has been undertaken at Los Alamos National Laboratory (LANL) to develop the transport code MCNP6, the latest LANL Monte-Carlo transport code representing a merger and improvement of MCNP5 and MCNPX. We emphasize a description of the latest developments of MCNP6 at higher energies to improve its reliability in calculating rare-isotope production, high-energy cumulative particle production, and a gamut of reactions important for space-radiation shielding, cosmic-ray propagation, and accelerator applications. We present several examples of validation and verification of MCNP6 compared to a wide variety of intermediate- and high-energy experimental data on reactions induced by photons, mesons, nucleons, and nuclei at energies from tens of MeV to about 1 TeV/nucleon, and compare to results from other modern simulation tools.
△ Less
Submitted 20 July, 2012;
originally announced July 2012.
-
The contrasting fission potential-energy structure of actinides and mercury isotopes
Authors:
Takatoshi Ichikawa,
Akira Iwamoto,
Peter Möller,
Arnold J. Sierk
Abstract:
Fission-fragment mass distributions are asymmetric in fission of typical actinide nuclei for nucleon number $A$ in the range $228 \lnsim A \lnsim 258$ and proton number $Z$ in the range $90\lnsim Z \lnsim 100$. For somewhat lighter systems it has been observed that fission mass distributions are usually symmetric. However, a recent experiment showed that fission of $^{180}$Hg following electron ca…
▽ More
Fission-fragment mass distributions are asymmetric in fission of typical actinide nuclei for nucleon number $A$ in the range $228 \lnsim A \lnsim 258$ and proton number $Z$ in the range $90\lnsim Z \lnsim 100$. For somewhat lighter systems it has been observed that fission mass distributions are usually symmetric. However, a recent experiment showed that fission of $^{180}$Hg following electron capture on $^{180}$Tl is asymmetric. We calculate potential-energy surfaces for a typical actinide nucleus and for 12 even isotopes in the range $^{178}$Hg--$^{200}$Hg, to investigate the similarities and differences of actinide compared to mercury potential surfaces and to what extent fission-fragment properties, in particular shell structure, relate to the structure of the static potential-energy surfaces. Potential-energy surfaces are calculated in the macroscopic-microscopic approach as functions of fiveshape coordinates for more than five million shapes. The structure of the surfaces are investigated by use of an immersion technique. We determine properties of minima, saddle points, valleys, and ridges between valleys in the 5D shape-coordinate space. Along the mercury isotope chain the barrier heights and the ridge heights and persistence with elongation vary significantly and show no obvious connection to possible fragment shell structure, in contrast to the actinide region, where there is a deep asymmetric valley extending from the saddle point to scission. The mechanism of asymmetric fission must be very different in the lighter proton-rich mercury isotopes compared to the actinide region and is apparently unrelated to fragment shell structure. Isotopes lighter than $^{192}$Hg have the saddle point blocked from a deep symmetric valley by a significant ridge. The ridge vanishes for the heavier Hg isotopes, for which we would expect a qualitatively different asymmetry of the fragments.
△ Less
Submitted 15 June, 2012; v1 submitted 9 March, 2012;
originally announced March 2012.
-
Fission-fragment mass distributions from strongly damped shape evolution
Authors:
J. Randrup,
P. Moller,
A. J. Sierk
Abstract:
Random walks on five-dimensional potential-energy surfaces were recently found to yield fission-fragment mass distributions that are in remarkable agreement with experimental data. Within the framework of the Smoluchowski equation of motion, which is appropriate for highly dissipative evolutions, we discuss the physical justification for that treatment and investigate the sensitivity of the result…
▽ More
Random walks on five-dimensional potential-energy surfaces were recently found to yield fission-fragment mass distributions that are in remarkable agreement with experimental data. Within the framework of the Smoluchowski equation of motion, which is appropriate for highly dissipative evolutions, we discuss the physical justification for that treatment and investigate the sensitivity of the resulting mass yields to a variety of model ingredients, including in particular the dimensionality and discretization of the shape space and the structure of the dissipation tensor. The mass yields are found to be relatively robust, suggesting that the simple random walk presents a useful calculational tool. Quantitatively refined results can be obtained by including physically plausible forms of the dissipation, which amounts to simulating the Brownian shape motion in an anisotropic medium.
△ Less
Submitted 13 July, 2011;
originally announced July 2011.
-
CEM03.03 and LAQGSM03.03 Event Generators for the MCNP6, MCNPX, and MARS15 Transport Codes
Authors:
S. G. Mashnik,
K. K. Gudima,
R. E. Prael,
A. J. Sierk,
M. I. Baznat,
N. V. Mokhov
Abstract:
A description of the IntraNuclear Cascade (INC), preequilibrium, evaporation, fission, coalescence, and Fermi breakup models used by the latest versions of our CEM03.03 and LAQGSM03.03 event generators is presented, with a focus on our most recent developments of these models. The recently developed "S" and "G" versions of our codes, that consider multifragmentation of nuclei formed after the pr…
▽ More
A description of the IntraNuclear Cascade (INC), preequilibrium, evaporation, fission, coalescence, and Fermi breakup models used by the latest versions of our CEM03.03 and LAQGSM03.03 event generators is presented, with a focus on our most recent developments of these models. The recently developed "S" and "G" versions of our codes, that consider multifragmentation of nuclei formed after the preequilibrium stage of reactions when their excitation energy is above 2A MeV using the Statistical Multifragmentation Model (SMM) code by Botvina et al. ("S" stands for SMM) and the fission-like binary-decay model GEMINI by Charity ("G" stands for GEMINI), respectively, are briefly described as well. Examples of benchmarking our models against a large variety of experimental data on particle-particle, particle-nucleus, and nucleus-nucleus reactions are presented. Open questions on reaction mechanisms and future necessary work are outlined.
△ Less
Submitted 12 May, 2008; v1 submitted 6 May, 2008;
originally announced May 2008.
-
CEM03 and LAQGSM03 - new modeling tools for nuclear applications
Authors:
S. G. Mashnik,
A. J. Sierk,
K. K. Gudima,
M. I. Baznat
Abstract:
An improved version of the Cascade-Exciton Model (CEM) of nuclear reactions realized in the code CEM2k and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) have been developed recently at LANL to describe reactions induced by particles and nuclei for a number of applications. Our CEM2k and LAQGSM merged with the GEM2 evaporation/fission code by Furihata have predictive powers comp…
▽ More
An improved version of the Cascade-Exciton Model (CEM) of nuclear reactions realized in the code CEM2k and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) have been developed recently at LANL to describe reactions induced by particles and nuclei for a number of applications. Our CEM2k and LAQGSM merged with the GEM2 evaporation/fission code by Furihata have predictive powers comparable to other modern codes and describe many reactions better than other codes; therefore both our codes can be used as reliable event generators in transport codes for applications. During the last year, we have made a significant improvements to the intranuclear cascade parts of CEM2k and LAQGSM, and have extended LAQGSM to describe photonuclear reactions at energies to 10 GeV and higher. We have produced in this way improved versions of our codes, CEM03.01 and LAQGSM03.01. We present a brief description of our codes and show illustrative results obtained with CEM03.01 and LAQGSM03.01 for different reactions compared with predictions by other models, as well as examples of using our codes as modeling tools for nuclear applications.
△ Less
Submitted 20 October, 2005;
originally announced October 2005.
-
Extension of the CEM2k and LAQGSM Codes to Describe Photo-Nuclear Reactions
Authors:
S. G. Mashnik,
M. I. Baznat,
K. K. Gudima,
A. J. Sierk,
R. E. Prael
Abstract:
The improved Cascade-Exciton Model (CEM) code CEM2k+GEM2 and the Los Alamos version of the Quark-Gluon String Model code LAQGSM are extended to describe photonuclear reactions. First, we incorporate into CEM2k+GEM2 new evaluations of elementary cross sections based on the latest experimental data and also make several improvements in the description of the de-excitation of nuclei remaining after…
▽ More
The improved Cascade-Exciton Model (CEM) code CEM2k+GEM2 and the Los Alamos version of the Quark-Gluon String Model code LAQGSM are extended to describe photonuclear reactions. First, we incorporate into CEM2k+GEM2 new evaluations of elementary cross sections based on the latest experimental data and also make several improvements in the description of the de-excitation of nuclei remaining after the cascade stage of reactions induced by arbitrary projectiles. Next, for photonuclear reactions we include in CEM2k+GEM2 a normalization to evaluated experimental absorption cross sections based on the recent systematics by Kossov. Then, we extend our high-energy code LAQGSM by adding the photonuclear mode which was ignored in all its previous versions, and add to it the photonuclear part from our improved CEM2k+GEM2. In this work we present a short description of the photonuclear mode as incorporated into our codes, show several illustrative results, and point out some unresolved problems.
△ Less
Submitted 25 March, 2005; v1 submitted 24 March, 2005;
originally announced March 2005.
-
Improved Intranuclear Cascade Models for the Codes CEM2k and LAQGSM
Authors:
S. G. Mashnik,
K. K. Gudima,
A. J. Sierk,
R. E. Prael
Abstract:
An improved version of the Cascade-Exciton Model (CEM) of nuclear reactions implemented in the codes CEM2k and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) has been developed recently at LANL to describe reactions induced by particles and nuclei at energies up to hundreds of GeV/nucleon for a number of applications. We present several improvements to the intranuclear cascade m…
▽ More
An improved version of the Cascade-Exciton Model (CEM) of nuclear reactions implemented in the codes CEM2k and the Los Alamos version of the Quark-Gluon String Model (LAQGSM) has been developed recently at LANL to describe reactions induced by particles and nuclei at energies up to hundreds of GeV/nucleon for a number of applications. We present several improvements to the intranuclear cascade models used in CEM2k and LAQGSM developed recently to better describe the physics of nuclear reactions. First, we incorporate the photonuclear mode from CEM2k into LAQGSM to allow it to describe photonuclear reactions, not previously modeled there. Then, we develop new approximations to describe more accurately experimental elementary energy and angular distributions of secondary particles from hadron-hadron and photon-hadron interactions using available data and approximations published by other authors. Finally, to consider reactions involving very highly excited nuclei (E* > 2-3 MeV/A), we have incorporated into CEM2k and LAQGSM the Statistical Multifragmentation Model (SMM), as a possible reaction mechanism occurring after the preequilibrium stage. A number of other refinements to our codes developed recently are also listed.
△ Less
Submitted 7 February, 2005;
originally announced February 2005.
-
Analysis of the JINR p(660 MeV) + 129I, 237Np, and 241Am Measurements with Eleven Different Models
Authors:
S. G. Mashnik,
V. S. Pronskikh,
J. Adam,
A. Balabekyan,
V. S. Barashenkov,
V. P. Filinova,
A. A. Solnyshkin,
V. M. Tsoupko-Sitnikov,
R. Brandt,
R. Odoj,
A. J. Sierk,
R. E. Prael,
K. K. Gudima,
M. I. Baznat
Abstract:
We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2…
▽ More
We have analyzed the recent JINR measurements on nuclide production cross sections from interaction of 660 MeV proton beams with radioactive targets of enriched 129I (85% 129I and 15% 127I), 237Np, and 241Am with eleven different models, realized in eight transport codes and event-generators: LAHET (Bertini, ISABEL, INCL+ABLA, and INCL+RAL options), CASCADE, CEM95, CEM2k, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. We found out that all these models have problems in a correct description of many of these cross sections, though some of these models describe very well most of the recent measurements done at GSI using inverse kinematics, as well as many other reactions. None of the tested here models is able to reproduce well all the JINR data and all of them should be further improved. Development of a better universal evaporation/fission model should be of a highest priority. We conclude that it is impossible to make a correct choice between fission and fragmentation reaction mechanisms analyzing only measurements on product cross sections; addressing this question would require analysis of two- or multi-particle correlation measurements.
△ Less
Submitted 27 July, 2004;
originally announced July 2004.
-
Recent Enhancements to the MARS15 Code
Authors:
N. V. Mokhov,
K. K. Gudima,
C. C. James,
M. A. Kostin,
S. G. Mashnik,
E. Ng,
J. -F. Ostiguy,
I. L. Rakhno,
A. J. Sierk,
S. I. Striganov
Abstract:
The MARS code is under continuous development and has recently undergone substantial improvements that further increase its reliability and predictive power in numerous shielding, accelerator, detector and space applications. The major developments and new features of the MARS15 (2004) version described in this paper concern an extended list of elementary particles and arbitrary heavy ions and t…
▽ More
The MARS code is under continuous development and has recently undergone substantial improvements that further increase its reliability and predictive power in numerous shielding, accelerator, detector and space applications. The major developments and new features of the MARS15 (2004) version described in this paper concern an extended list of elementary particles and arbitrary heavy ions and their interaction cross-sections, inclusive and exclusive nuclear event generators, module for modelling particle electromagnetic interactions, enhanced geometry and histograming options, improved MAD-MARS Beam Line Builder, enhanced Graphical-User Interface, and an MPI-based parallelization of the code.
△ Less
Submitted 28 April, 2004;
originally announced April 2004.
-
Analysis of the GSI A+p and A+A Spallation, Fission, and Fragmentation Measurements with the LANL CEM2k and LAQGSM codes
Authors:
S. G. Mashnik,
K. K. Gudima,
R. E. Prael,
A. J. Sierk
Abstract:
The CEM2k and LAQGSM codes have been recently developed at Los Alamos National Laboratory to simulate nuclear reactions induced by particles and nuclei for a number of applications. We have benchmarked our codes against most available measured data at projectile energies from 10 MeV/A to 800 GeV/A and have compared our results with predictions of other current models used by the nuclear communit…
▽ More
The CEM2k and LAQGSM codes have been recently developed at Los Alamos National Laboratory to simulate nuclear reactions induced by particles and nuclei for a number of applications. We have benchmarked our codes against most available measured data at projectile energies from 10 MeV/A to 800 GeV/A and have compared our results with predictions of other current models used by the nuclear community. Here, we present a brief description of our codes and show illustrative results obtained with CEM2k and LAQGSM for A+p and A+A spallation, fission, and fragmentation reactions measured recently at GSI compared with predictions by other models. Further necessary work is outlined.
△ Less
Submitted 7 April, 2004;
originally announced April 2004.
-
Study of Proton Induced Reactions in a Radioactive 129-I Target at Ep=660 MeV
Authors:
V. S. Pronskikh,
J. Adam,
A. R. Balabekyan,
V. S. Barashenkov,
V. P. Dzhelepov,
S. A. Gustov,
V. P. Filinova,
V. G. Kalinnikov,
M. I. Krivopustov,
I. V. Mirokhin,
A. A. Solnyshkin,
V. I. Stegailov,
V. M. Tsoupko-Sitnikov,
J. Mrazek,
R. Brandt,
W. Westmeier,
R. Odoj,
S. G. Mashnik,
A. J. Sierk,
R. E. Prael,
K. K. Gudima,
M. I. Baznat
Abstract:
Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA optio…
▽ More
Two NaI (85% 129-I and 15% 127-I) targets were exposed to a beam of 660-MeV protons. Cross sections for formation of 76 residual nuclei were obtained by the induced activity method. The results are compared with other experimental data on 127-I and theoretical calculations by eleven models contained in the codes LAHET3 (using the Bertini+Dresner, ISABEL+Dresner, INCL+Dresner, and INCL+ABLA options), CASCADE, CEM95, CEM2K, LAQGSM+GEM2, CEM2k+GEM2, LAQGSM+GEMINI, and CEM2k+GEMINI. Most of the models describe spallation products with masses close to the target reasonably well while the reliability of the codes differs greatly in the deep spallation and fission/fragmentation regions. The difficulties in describing products with A=40-80 by all of the codes tested here except for CEM2k+GEMINI and LAQGSM+GEMINI is related to the neglect of fission (and fragmentation) processes for targets as light as 129-I.
△ Less
Submitted 30 March, 2004;
originally announced March 2004.
-
Five-Dimensional Fission-Barrier Calulations from Se-70 to Cf-252
Authors:
Peter Moller,
Arnold J. Sierk,
Akira Iwamoto
Abstract:
We present fission-barrier-height calculations for nuclei throught the Periodic Table based on a realistic macroscopic-microscopic model. Compared to other calculations: (1) we use a deformation space of sufficiently high dimension, sampled densely enough to describe the relevant topography of the fission potential, (2) we unambiguously find the physically relevant saddle points in this space, a…
▽ More
We present fission-barrier-height calculations for nuclei throught the Periodic Table based on a realistic macroscopic-microscopic model. Compared to other calculations: (1) we use a deformation space of sufficiently high dimension, sampled densely enough to describe the relevant topography of the fission potential, (2) we unambiguously find the physically relevant saddle points in this space, and (3) we formulate our model so that we obtain continuity of the potential energy at the division point between a single system and separated fission fragments or colliding nuclei, allowing us to (4) describe both fission-barrier heights and ground-state masses throughout the Periodic Table.
△ Less
Submitted 27 January, 2004;
originally announced January 2004.
-
Analysis of Intermediate-Energy Nucleus-Nucleus Spallation, Fission, and Fragmentation Reactions with the LAQGSM code
Authors:
S. G. Mashnik,
K. K. Gudima,
R. E. Prael,
A. J. Sierk
Abstract:
The LAQGSM code has been recently developed at Los Alamos National Laboratory to simulate nuclear reactions for proton radiography applications. We have benchmarked our code against most available measured data both for proton-nucleus and nucleus-nucleus interactions at incident energies from 10 MeV to 800 GeV and have compared our results with predictions of other current models used by the nuc…
▽ More
The LAQGSM code has been recently developed at Los Alamos National Laboratory to simulate nuclear reactions for proton radiography applications. We have benchmarked our code against most available measured data both for proton-nucleus and nucleus-nucleus interactions at incident energies from 10 MeV to 800 GeV and have compared our results with predictions of other current models used by the nuclear community. Here, we present a brief description of our code and show illustrative results obtained with LAQGSM for neutron spectra measured recently by Nakamura's groups for reactions induced by light and medium nuclei on targets from C to Pb at several incident energies from 95 to 600 MeV/nucleon and with the recent GSI measurements of spallation, fission, and fragmentation yields from A+p and A+A reactions at incident energies near and below 1 GeV/nucleon. Further necessary work is outlined.
△ Less
Submitted 14 August, 2003;
originally announced August 2003.
-
Merging the CEM2K and LAQGSM Codes with GEM2 to Describe Fission and Light-fragment Production
Authors:
Stepan G. Mashnik,
Konstantin K. Gudima,
Arnold J. Sierk
Abstract:
We present the current status of the improved Cascade-Exciton Model (CEM) code CEM2k and of the Los Alamos version of the Quark-Gluon String Model code LAQGSM. To describe fission and light-fragment (heavier than He4) production, both CEM2k and LAQGSM have been merged with the GEM2 code of Furihata. We present some results on proton- and deuteron-induced spallation, fission, and fragmentation re…
▽ More
We present the current status of the improved Cascade-Exciton Model (CEM) code CEM2k and of the Los Alamos version of the Quark-Gluon String Model code LAQGSM. To describe fission and light-fragment (heavier than He4) production, both CEM2k and LAQGSM have been merged with the GEM2 code of Furihata. We present some results on proton- and deuteron-induced spallation, fission, and fragmentation reactions predicted by these extended versions of CEM2k and LAQGSM. We show that merging CEM2k and LAQGSM with GEM2 allows us to describe many fission and fragmentation reactions in addition to the spallation reactions which are already relatively well described. Nevertheless, the standard version of GEM2 does not provide a completely satisfactory description of complex particle spectra, heavy-fragment emission, and spallation yields, and is not yet a reliable tool for applications. We conclude that we may choose to use a model similar to the GEM2 approach in our codes, but it must be significantly extended and further improved. We observe that it is not sufficient to analyze only A and Z distributions of the product yields when evaluating this type of model, as is often done in the literature; instead it is important to study all the separate isotopic yields as well as the spectra of light particles and fragments.
△ Less
Submitted 3 April, 2003;
originally announced April 2003.
-
Event Generator Benchmarking for Proton Radiography Applications
Authors:
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Konstantin K. Gudima,
Nikolai V. Mokhov
Abstract:
We have benchmarked the QGSM code and event generators of the MARS and LAHET3 codes as potential candidates for high-energy programs to be used in simulations for the Proton Radiography (PRad) Project. We have compiled from the literature experimental data on spectra of particles emitted from proton-induced reactions at incident energies from 30 GeV to 70 GeV on different nuclei and have perform…
▽ More
We have benchmarked the QGSM code and event generators of the MARS and LAHET3 codes as potential candidates for high-energy programs to be used in simulations for the Proton Radiography (PRad) Project. We have compiled from the literature experimental data on spectra of particles emitted from proton-induced reactions at incident energies from 30 GeV to 70 GeV on different nuclei and have performed calculations for all reactions for which we found data with these three codes without any modifications and using only default parameters and standard inputs. Our results (514 plots) show that all three codes describe reasonably most of the studied reactions, though all of them should be further improved before becoming reliable tools for PRad. We present here our conclusions concerning the relative roles of different reaction mechanisms in the production of specific secondary particles. We comment on the strengths and weaknesses of QGSM, MARS, and LAHET3 and suggest further improvements to these codes and to other models.
△ Less
Submitted 17 March, 2003;
originally announced March 2003.
-
CEM2k and LAQGSM as Event Generators for Space-Radiation-Shielding and Cosmic-Ray-Propagation Applications
Authors:
S. G. Mashnik,
K. K. Gudima,
I. V. Moskalenko,
R. E. Prael,
A. J. Sierk
Abstract:
The CEM2k and LAQGSM codes have been recently developed at Los Alamos National Laboratory to simulate nuclear reactions for a number of applications. We have benchmarked our codes against most available measured data at incident particle energies from 10 MeV to 800 GeV and have compared our results with predictions of other current models used by the nuclear community. Here, we present a brief d…
▽ More
The CEM2k and LAQGSM codes have been recently developed at Los Alamos National Laboratory to simulate nuclear reactions for a number of applications. We have benchmarked our codes against most available measured data at incident particle energies from 10 MeV to 800 GeV and have compared our results with predictions of other current models used by the nuclear community. Here, we present a brief description of our codes and show illustrative results to show that CEM2k and LAQGSM can be used as reliable event generators for space-radiation-shielding, cosmic-ray-propagation, and other astrophysical applications. Finally, we show the use of our calculated cross sections together with experimental data from our LANL T-16 compilation to produce evaluated files which we use in the GALPROP model of galactic particle propagation to better constrain the size of the CR halo.
△ Less
Submitted 29 October, 2002; v1 submitted 23 October, 2002;
originally announced October 2002.
-
Benchmarking Ten Codes Against the Recent GSI Measurements of the Nuclide Yields from 208Pb, 197Au, and 238U + p Reactions at 1 GeV/nucleon
Authors:
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Vyacheslav F. Batyaev,
Svetlana V. Kvasova,
Ruslan D. Mulambetov,
Yury E. Titarenko
Abstract:
A qualitative and quantitative comparison of the recent GSI measurements of the nuclide yields from 208Pb and 238U at 1 GeV/nucleon and 197Au at 800 MeV/nucleon interactions with protons with the codes LAHET (with both ISABEL and Bertini options), CEM95, CEM97, CEM2k, CASCADE, CASCADE/INPE, YIELDX, HETC, and INUCL is presented. The predictive power of these codes is reasonable for nuclides in th…
▽ More
A qualitative and quantitative comparison of the recent GSI measurements of the nuclide yields from 208Pb and 238U at 1 GeV/nucleon and 197Au at 800 MeV/nucleon interactions with protons with the codes LAHET (with both ISABEL and Bertini options), CEM95, CEM97, CEM2k, CASCADE, CASCADE/INPE, YIELDX, HETC, and INUCL is presented. The predictive power of these codes is reasonable for nuclides in the near spallation region but is worse for deep spallation and much worse in the fission region. None of these codes agree well with the data in the whole mass region of product nuclides and all must be improved to become reliable tools for accelerator-driven applications.
△ Less
Submitted 29 August, 2002;
originally announced August 2002.
-
Recent Developments of the Cascade-Exciton Model of Nuclear Reactions
Authors:
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions are described. The improved cascade-exciton model as implemented in the code CEM97 differs from the CEM95 version by incorporating new approximations for the elementary cross sections used in the cascade, using more precise values for nuclear masses and pairing energies, using corrected systematics for the level-density…
▽ More
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions are described. The improved cascade-exciton model as implemented in the code CEM97 differs from the CEM95 version by incorporating new approximations for the elementary cross sections used in the cascade, using more precise values for nuclear masses and pairing energies, using corrected systematics for the level-density parameters, and several other refinements. We have improved algorithms used in many subroutines, decreasing the computing time by up to a factor of 6 for heavy targets. We describe a number of further improvements and changes to CEM97, motivated by new data on isotope production measured at GSI. This leads us to CEM2k, a new version of the CEM code. CEM2k has a longer cascade stage, less preequilibrium emission, and evaporation from more highly excited compound nuclei compared to earlier versions. CEM2k also has other improvements and allows us to better model neutron, radionuclide, and gas production in ATW spallation targets. The increased accuracy and predictive power of the code CEM2k are shown by several examples. Further necessary work is outlined.
△ Less
Submitted 29 August, 2002;
originally announced August 2002.
-
Complex Particle and Light Fragment Emission in the Cascade-Exciton Model of Nuclear Reactions
Authors:
Stepan G. Mashnik,
Arnold J. Sierk,
Konstantin K. Gudima
Abstract:
A brief description of our improvements and refinements that led from the CEM95 version of the Cascade-Exciton Model (CEM) code to CEM97 and to CEM2k is given. The increased accuracy and predictive power of the code CEM2k are shown by several examples. To describe fission and light-fragment (heavier than 4He) production, the CEM2k code has been merged with the GEM2 code of Furihata. We present s…
▽ More
A brief description of our improvements and refinements that led from the CEM95 version of the Cascade-Exciton Model (CEM) code to CEM97 and to CEM2k is given. The increased accuracy and predictive power of the code CEM2k are shown by several examples. To describe fission and light-fragment (heavier than 4He) production, the CEM2k code has been merged with the GEM2 code of Furihata. We present some results on proton-induced fragmentation and fission reactions predicted by this extended version of CEM2k. We show that merging CEM2k with GEM2 allows us to describe many fission and fragmentation reactions in addition to the spallation reactions which are already relatively well described. We have initiated another approach to describe fission, complex particles and fragment emission by develo** further our CEM2k code addressing specifically these problems. In this effort, we have developed our own universal approximation for inverse cross sections, new routines to calculate Coulomb barriers and widths of emitted particles and to simulate their kinetic energy using arbitrary approximations for the inverse cross sections. To describe fission-fragment production, we have incorporated into CEM2k a thermodynamical model of fission by Stepanov. This extended version of CEM2k allows us to describe much better complex particle emission and many fission fragments, but it is still incomplete and needs further work.
△ Less
Submitted 22 August, 2002;
originally announced August 2002.
-
Threshold Reaction Rates and Energy Spectra of Neutrons in the 0.8-1.6 GeV Proton-Irradiated W, Na Targets
Authors:
Yury E. Titarenko,
Vyacheslav F. Batyaev,
Evgeny I. Karpikhin,
Valery M. Zhivun,
Svetlana V. Kvasova,
Ruslan D. Mulambetov,
Dmitry V. Fischenko,
Aleksander B. Koldobsky,
Yury V. Trebukhovsky,
Vladimir A. Korolev,
Gennady N. Smirnov,
Andrey M. Voloshenko,
Vladimir Yu. Belov,
Nikolay I. Kachalin Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Hideshi Yasuda
Abstract:
Considering the prospects of using the W-Na target assemblies in ADS facilities, the experiments were made to study the nuclear-physics characteristics of W and Na, and the composite structures thereof in their interactions with 0.8-GeV and 1.6-GeV protons. The neutron and proton-induced reaction rates were measured inside, and on the surface of, a cylinder-shaped heterogeneous W-Na assembly tog…
▽ More
Considering the prospects of using the W-Na target assemblies in ADS facilities, the experiments were made to study the nuclear-physics characteristics of W and Na, and the composite structures thereof in their interactions with 0.8-GeV and 1.6-GeV protons. The neutron and proton-induced reaction rates were measured inside, and on the surface of, a cylinder-shaped heterogeneous W-Na assembly together with the double-differential spectra of secondary neutrons emitted from different-depth W and Na discs. The measurement results were simulated by the LAHET, CEM2k, and KASKAD-S codes in terms of the latest versions of nuclear databases.
△ Less
Submitted 29 August, 2002;
originally announced August 2002.
-
Experimental and Theoretical Study of the Residual Product Nuclide Yields in 100-2600 MeV Proton-Irradiated Thin Targets
Authors:
Yury E. Titarenko,
Vyacheslav F. Batyaev,
Evgeny I. Karpikhin,
Valery M. Zhivun,
Aleksander B. Koldobsky,
Ruslan D. Mulambetov,
Svetlana V. Kvasova,
Dmitry V. Fischenko,
Vladilen S. Barashenkov,
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Hideshi Yasuda,
Masaki Saito
Abstract:
The work is aimed at experimental determining and computer simulating the independent and cumulative yields of residual product nuclei in the target and structure materials of the transmutation facilities driven by high-current accelerators. The ITEP U-10 accelerator was used in 48 experiments to obtain more than 4000 values of the yields of radioactive residual product nuclei in 0.1-2.6 GeV pro…
▽ More
The work is aimed at experimental determining and computer simulating the independent and cumulative yields of residual product nuclei in the target and structure materials of the transmutation facilities driven by high-current accelerators. The ITEP U-10 accelerator was used in 48 experiments to obtain more than 4000 values of the yields of radioactive residual product nuclei in 0.1-2.6 GeV proton-irradiated thin 182,183,184,186-W, nat-W, 56-Fe, 58-Ni, 93-Nb, 232-Th, nat-U, 99-Tc, 59-Co 63,65-Cu, nat-Hg, 208-Pb, and 27-Al targets. The results of verifying the LAHET, CEM95, CEM2k, CASCADE, CASCADE/INPE, YIELDX, HETC, INUCL, and other simulation codes are presented.
△ Less
Submitted 29 August, 2002;
originally announced August 2002.
-
Cross sections for nuclide production in 1 GeV proton-irradiated 208-Pb
Authors:
Yu. E. Titarenko,
O. V. Shvedov,
V. F. Batyaev,
E. I. Karpikhin,
V. M. Zhivun,
A. B. Koldobsky,
R. D. Mulambetov,
D. V. Fischenko,
S. V. Kvasova,
A. N. Sosnin,
S. G. Mashnik,
R. E. Prael,
A. J. Sierk,
T. A. Gabriel,
M. Saito,
H. Yasuda
Abstract:
114 cross sections for nuclide production in a 1.0 GeV proton-irradiated thin 208Pb target have been measured by the direct gamma spectrometry method using a high-resolution Ge detector. The gamma spectra were processed by the GENIE-2000 code. The ITEP-developed SIGMA code was used together with the PCNUDAT nuclear decay database to identify the gamma lines and to determine the cross sections. T…
▽ More
114 cross sections for nuclide production in a 1.0 GeV proton-irradiated thin 208Pb target have been measured by the direct gamma spectrometry method using a high-resolution Ge detector. The gamma spectra were processed by the GENIE-2000 code. The ITEP-developed SIGMA code was used together with the PCNUDAT nuclear decay database to identify the gamma lines and to determine the cross sections. The 27Al(p,x)22Na reaction was used to monitor the proton flux. Results of a feasibility study of the auxiliary 27Al(p,x)24Na and 27Al(p,x)7Be monitor reactions in the 0.07-2.6 GeV proton-energy range are presented as well. Most of the experimental data have been analyzed by the LAHET (with ISABEL and Bertini options), CEM95, CEM2k, INUCL, CASCADE, CASCADE/INPE, and YIELDX codes that simulate hadron-nucleus interactions.
△ Less
Submitted 22 November, 2000;
originally announced November 2000.
-
CEM2k - Recent Developments in CEM
Authors:
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions are briefly described. These changes are motivated by new data on isotope production measured recently in "reverse kinematics" at GSI for interactions of 208-Pb and 238-U at 1 GeV/nucleon and 197-Au at 800 MeV/nucleon with liquid 1-H. This study leads us to CEM2k, which is a new version of the CEM code that is still unde…
▽ More
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions are briefly described. These changes are motivated by new data on isotope production measured recently in "reverse kinematics" at GSI for interactions of 208-Pb and 238-U at 1 GeV/nucleon and 197-Au at 800 MeV/nucleon with liquid 1-H. This study leads us to CEM2k, which is a new version of the CEM code that is still under development. The increased accuracy and predictive power of the code CEM2k are shown by several examples. Further necessary work is outlined.
△ Less
Submitted 17 November, 2000;
originally announced November 2000.
-
Spectral Measurements of Neutrons from Pb, W, and Na Targets Irradiated by 0.8 AND 1.6 GeV Protons
Authors:
Yury E. Titarenko,
Oleg V. Shvedov,
Yury V. Trebukhovsky,
Vyacheslav F. Batyaev,
Valery M. Zhivun,
Dmitry V. Fishchenko,
Vladimir A. Korolyov,
Gennady N. Smirnov,
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Hideshi Yasuda
Abstract:
Preliminary results of neutron spectra measurements from Pb, W, and Na targets irradiated by 0.8 and 1.6 GeV protons are presented. Measurements have been carried out using the proton beam extracted from the ITEP synchrotron and the TOF technique. Neutron registration has been carried out using BICRON MAB-511 liquid scintillation counters. Spectra measured at angles of 30, 60, 90, 120, and 150 d…
▽ More
Preliminary results of neutron spectra measurements from Pb, W, and Na targets irradiated by 0.8 and 1.6 GeV protons are presented. Measurements have been carried out using the proton beam extracted from the ITEP synchrotron and the TOF technique. Neutron registration has been carried out using BICRON MAB-511 liquid scintillation counters. Spectra measured at angles of 30, 60, 90, 120, and 150 degrees have been compared with results of their simulation using the LAHET code system and the code CEM2k. The results are of interest both from data gathering viewpoint and as a benchmark of the up-to-the-date predictive powers of codes applied to design the hybrid Accelerator Driven Systems (ADS) using lead or lead-bismuth targets and sodium-cooled targets.
△ Less
Submitted 21 August, 2000;
originally announced August 2000.
-
Study of Residual Product Nuclide Yields from 0.1, 0.2, 0.8, and 2.6 GeV Proton-Irradiated nat-Hg Targets
Authors:
Yury E. Titarenko,
Oleg V. Shvedov,
Vyacheslav F. Batyaev,
Valery M. Zhivun,
Evgeny I. Karpikhin,
Ruslan D. Mulambetov,
Dmitry V. Fischenko,
Svetlana V. Kvasova,
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Hideshi Yasuda
Abstract:
The direct gamma-spectrometry method is used to measure more than 350 residual product nuclide yields from 0.1, 0.2, 0.8, and 2.6 GeV proton irradiated HgO targets. The gamma-spectrometer resolution is of 1.8 keV at the 1332 keV gamma-line. The resultant gamma-spectra are processed by the GENIE-2000 code. The gamma-lines are identified, and the cross-sections calculated, by the ITEP-designed SIG…
▽ More
The direct gamma-spectrometry method is used to measure more than 350 residual product nuclide yields from 0.1, 0.2, 0.8, and 2.6 GeV proton irradiated HgO targets. The gamma-spectrometer resolution is of 1.8 keV at the 1332 keV gamma-line. The resultant gamma-spectra are processed by the GENIE-2000 code. The gamma-lines are identified, and the cross-sections calculated, by the ITEP-designed SIGMA code using the PCNUDAT radioactive database. The 27-Al(p,x)Na-22 reaction is used as monitor. The experimental results are compared with calculations by the LAHET, CEM95, CEM2k, INUCL, CASCADE, and YIELDX codes.
△ Less
Submitted 21 August, 2000;
originally announced August 2000.
-
Study of Residual Product Nuclide Yields in 1.0 GeV Proton-Irradiated 208-Pb and 2.6 GeV Proton-Irradiated nat-W Thin Targets
Authors:
Yury E. Titarenko,
Oleg V. Shvedov,
Vyacheslav F. Batyaev,
Valery M. Zhivun,
Evgeny I. Karpikhin,
Ruslan D. Mulambetov,
Dmitry V. Fischenko,
Svetlana V. Kvasova,
Stepan G. Mashnik,
Richard E. Prael,
Arnold J. Sierk,
Hideshi Yasuda
Abstract:
113 residual product nuclide yields in a 1.0 GeV proton-irradiated thin monoisotopic 208-Pb sample and 107 residual product nuclide yields in a 2.6 GeV proton-irradiated nat-W sample have been measured and simulated by 8 different codes. The irradiations were made using proton beams extracted from the ITEP synchrotron. The nuclide yields were gamma-spectrometered directly using a high-resolution…
▽ More
113 residual product nuclide yields in a 1.0 GeV proton-irradiated thin monoisotopic 208-Pb sample and 107 residual product nuclide yields in a 2.6 GeV proton-irradiated nat-W sample have been measured and simulated by 8 different codes. The irradiations were made using proton beams extracted from the ITEP synchrotron. The nuclide yields were gamma-spectrometered directly using a high-resolution Ge-detector. The gamma-spectra were processed by the GENIE-2000 code. The ITEP-developed SIGMA code was used together with the PCNUDAT nuclear decay database to identify the gamma-lines and to determine the cross-sections. The 27-Al(p,x)Na-22 reaction was used to monitor the proton flux. The measured yields are compared with calculation the LAHET (with ISABEL and Bertini options), CEM95, CEM2k, CASCADE, CASCADE/INPE, INUCL, and YIELDX codes. Estimates of the mean deviation factor are used to demonstrate the predictive power of the codes. The results obtained may be of interest in studying the parameters of the Pb and W target modules of the hybrid Accelerator-Driven System (ADS) facilities.
△ Less
Submitted 21 August, 2000;
originally announced August 2000.
-
Production and Validation of Isotope Production Cross Section Libraries for Neutrons and Protons to 1.7 GeV
Authors:
S. G. Mashnik,
A. J. Sierk,
K. A. Van Riper,
W. B. Wilson
Abstract:
For validation and development of codes and for modeling isotope production in high power accelerators and APT Materials studies, we have produced experimental, calculated, and evaluated activation libraries for interaction of nucleons with nuclides covering about a third of all natural elements. For targets considered here, our compilation of experimental data is the most complete we are aware…
▽ More
For validation and development of codes and for modeling isotope production in high power accelerators and APT Materials studies, we have produced experimental, calculated, and evaluated activation libraries for interaction of nucleons with nuclides covering about a third of all natural elements. For targets considered here, our compilation of experimental data is the most complete we are aware of, since it contains all data available on the Web, in journal papers, laboratory reports, theses, and books, as well as all data included in the large compilation by Sobolevsky with co-authors (NUCLEX) published recently by Springer-Verlag in 4 volumes. Our evaluated library was produced using all available experimental cross sections together with calculations by the CEM95, LAHET, and HMS-ALICE codes and with the European Activation File EAF-97 and LANL Update II of the ECNAF Neutron Activation Cross-Section Library.
△ Less
Submitted 24 December, 1998;
originally announced December 1998.
-
Modeling Fission in the Cascade-Exciton Model
Authors:
Arnold J. Sierk,
Stepan G. Mashnik
Abstract:
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions to describe high energy particle induced fission are briefly described. The increased accuracy and predictive power of the CEM are shown by several examples. Further necessary work is outlined.
Recent developments of the Cascade-Exciton Model (CEM) of nuclear reactions to describe high energy particle induced fission are briefly described. The increased accuracy and predictive power of the CEM are shown by several examples. Further necessary work is outlined.
△ Less
Submitted 24 December, 1998;
originally announced December 1998.
-
Improved Cascade-Exciton Model of Nuclear Reactions
Authors:
Stepan G. Mashnik,
Arnold J. Sierk
Abstract:
Recent improvements to the Cascade-Exciton Model (CEM) of nuclear reactions are briefly described. They concern mainly the cascade stage of reactions and a better description of nuclei during the preequilibrium and evaporation stages of reactions. The development of the CEM concerning fission is given in a separate talk at this conference. The increased accuracy and predictive power of the CEM a…
▽ More
Recent improvements to the Cascade-Exciton Model (CEM) of nuclear reactions are briefly described. They concern mainly the cascade stage of reactions and a better description of nuclei during the preequilibrium and evaporation stages of reactions. The development of the CEM concerning fission is given in a separate talk at this conference. The increased accuracy and predictive power of the CEM are shown by several examples. Possible further improvements to the CEM and other models are discussed.
△ Less
Submitted 24 December, 1998;
originally announced December 1998.
-
MARS Code Developments
Authors:
N. V. Mokhov,
S. I. Striganov,
A. Van Ginneken,
S. G. Mashnik,
A. J. Sierk,
J. Ranft
Abstract:
Recent developments in the physical model of 1 MeV to 100 TeV hadron and lepton interactions with nuclei and atoms are described. These include a new nuclear cross section library, a model for soft pion production, the cascade-exciton model, the dual parton model, deuteron-nucleus and neutrino-nucleus interaction models, detailed description of muon, pion, and antiproton absorption and a unified…
▽ More
Recent developments in the physical model of 1 MeV to 100 TeV hadron and lepton interactions with nuclei and atoms are described. These include a new nuclear cross section library, a model for soft pion production, the cascade-exciton model, the dual parton model, deuteron-nucleus and neutrino-nucleus interaction models, detailed description of muon, pion, and antiproton absorption and a unified treatment of muon and charged hadron electromagnetic interactions with matter. New algorithms are implemented into the MARS13(98)} Monte Carlo code and benchmarked against experimental data. The code capabilities to simulate cascades and generate a variety of results in complex media have been also enhanced.
△ Less
Submitted 15 December, 1998; v1 submitted 15 December, 1998;
originally announced December 1998.
-
Cascade-Exciton Model Analysis of Nucleon-Induced Fission Cross Sections of Lead and Bismuth at Energies from 45 to 500 MeV
Authors:
A. V. Prokofiev,
S. G. Mashnik,
A. J. Sierk
Abstract:
An extended version of the Cascade-Exciton Model (CEM) of nuclear reactions is applied to analyze nucleon-induced fission cross sections for Bi-209 and Pb-208 nuclei in the 45-500 MeV energy range. The available data on linear momentum transfer are analyzed as well. The results are compared with analytical approximations resulting from a comparative critical analysis of all available experimenta…
▽ More
An extended version of the Cascade-Exciton Model (CEM) of nuclear reactions is applied to analyze nucleon-induced fission cross sections for Bi-209 and Pb-208 nuclei in the 45-500 MeV energy range. The available data on linear momentum transfer are analyzed as well. The results are compared with analytical approximations resulting from a comparative critical analysis of all available experimental data. Systematic discrepancies between calculations and experimental data are revealed. A modification of the CEM is proposed, which significantly improves the model predictions for projectile energies above 100 MeV.
△ Less
Submitted 9 February, 1998;
originally announced February 1998.
-
Cascade-Exciton Model Analysis of Proton Spallation from 10 MeV to 5 GeV
Authors:
S. G. Mashnik,
A. J. Sierk,
O. Bersillon,
T. Gabriel
Abstract:
We have used an extended version of the Cascade-Exciton Model (CEM) to analyze more than 600 excitation functions for proton induced reactions on 19 targets ranging from C-12 to Au-197, for incident energies ranging from 10 MeV to 5 GeV. We have compared the calculations to available data, to calculations using approximately two dozen other models, and to predictions of several phenomenological…
▽ More
We have used an extended version of the Cascade-Exciton Model (CEM) to analyze more than 600 excitation functions for proton induced reactions on 19 targets ranging from C-12 to Au-197, for incident energies ranging from 10 MeV to 5 GeV. We have compared the calculations to available data, to calculations using approximately two dozen other models, and to predictions of several phenomenological systematics. We present here our conclusions concerning the relative roles of different reaction mechanisms in the production of specific final nuclides. We comment on the strengths and weaknesses of the CEM and suggest possible further improvements to the CEM and to other models.
△ Less
Submitted 8 September, 1997;
originally announced September 1997.
