-
Cavitation Rheology of Model Yield Stress Fluids Based on Carbopol
Authors:
Hadi Mohammadigoushki,
Kourosh Shoele
Abstract:
Measuring surface tension of yield stress fluids has remained a critical challenge due to limitations of the traditional tensiometry techniques. Here, we overcome those limits and successfully measure the surface tension and mechanical properties of a model yield stress fluid based on Carbopol gels via a needle-induced cavitation (NIC) technique. Our results indicate that the surface tension is ap…
▽ More
Measuring surface tension of yield stress fluids has remained a critical challenge due to limitations of the traditional tensiometry techniques. Here, we overcome those limits and successfully measure the surface tension and mechanical properties of a model yield stress fluid based on Carbopol gels via a needle-induced cavitation (NIC) technique. Our results indicate that the surface tension is approximately 70, and is independent of the rheology of yield stress fluid over a wide range of yield stress values. In addition, we demonstrate that a Young modulus smaller than 1 kPa can be successfully measured for Carbopol gels with NIC method. Finally, we present a time-resolved flow structure around the cavity in a host of yield stress fluids, and assess the impact of fluid rheology on the detailed form of flow around the cavity. Interestingly, prior to the critical point associated with cavitation, the yield stress fluid is weakly deformed suggesting that the measured surface tension data reflect the near equilibrium values. Beyond the critical point, the yield stress fluid experiences a strong flow that is controlled by both the critical pressure and the non-Newtonian rheology of the yield stress fluid.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Pacific Lamprey Inspired Climbing
Authors:
Brian Van Stratum,
Kourosh Shoele,
Jonathan E. Clark
Abstract:
Snakes and their bio-inspired robot counterparts have demonstrated locomotion on a wide range of terrains. However, dynamic vertical climbing is one locomotion strategy that has received little attention in the existing snake robotics literature. We demonstrate a new scansorial gait and robot inspired by the locomotion of the Pacific Lamprey. This new gait allows a robot to steer while climbing on…
▽ More
Snakes and their bio-inspired robot counterparts have demonstrated locomotion on a wide range of terrains. However, dynamic vertical climbing is one locomotion strategy that has received little attention in the existing snake robotics literature. We demonstrate a new scansorial gait and robot inspired by the locomotion of the Pacific Lamprey. This new gait allows a robot to steer while climbing on flat, near-vertical surfaces. A reduced-order model is developed and used to explore the relationship between body actuation and vertical and lateral motions of the robot. Trident, the new wall climbing lamprey-inspired robot, demonstrates dynamic climbing on flat vertical surfaces with a peak net vertical stride displacement of 4.1 cm per step. Actuating at 1.3 Hz, Trident attains a vertical climbing speed of 4.8 cm/s (0.09 Bl/s) at specific resistance of 8.3. Trident can also traverse laterally at 9 cm/s (0.17 Bl/s). Moreover, Trident is able to make 14\% longer strides than the Pacific Lamprey when climbing vertically. The computational and experimental results demonstrate that a lamprey-inspired climbing gait coupled with appropriate attachment is a useful climbing strategy for snake robots climbing near vertical surfaces with limited push points.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
The Effect of Internal Dam** on Locomotion in Frictional Environments
Authors:
Brian Van Stratum,
Jonathan E. Clark,
Kourosh Shoele
Abstract:
The gaits of undulating animals arise from a complex interaction of their central nervous system, muscle, connective tissue, bone, and environment. As a simplifying assumption, many previous studies have often assumed that sufficient internal force is available to produce observed kinematics, thus not focusing on quantifying the interconnection between muscle effort, body shape, and external react…
▽ More
The gaits of undulating animals arise from a complex interaction of their central nervous system, muscle, connective tissue, bone, and environment. As a simplifying assumption, many previous studies have often assumed that sufficient internal force is available to produce observed kinematics, thus not focusing on quantifying the interconnection between muscle effort, body shape, and external reaction forces. This interplay, however, is critical to locomotion performance in crawling animals, especially when accompanied by body viscoelasticity. Moreover, in bio-inspired robotic applications, the body's internal dam** is indeed a parameter that the designer can tune. Still, the effect of internal dam** is not well understood. This study explores how internal dam** affects the locomotion performance of a crawler with a continuous, visco-elastic, nonlinear beam model. Crawler muscle actuation is modeled as a traveling wave of bending moment propagating posteriorly along the body. Consistent with the friction properties of the scales of snakes and limbless lizards, environmental forces are modeled using anisotropic Coulomb friction. It is found that by varying the crawler body's internal dam**, the crawler's performance can be altered, and distinct gaits could be achieved, including changing the net locomotion direction from forward to back. We will discuss this forward and backward control and identify the optimal internal dam** for peak crawling speed.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Squirmer locomotion in a yield stress fluid
Authors:
Patrick S. Eastham,
Hadi Mohammadigoushki,
Kourosh Shoele
Abstract:
An axisymmetric squirmer in a Bingham viscoplastic fluid is studied numerically to determine the effect of a yield stress environment on locomotion. The nonlinearity of the governing equations necessitates numerical methods, which is accomplished by solving a variable-viscosity Stokes equation with a Finite Element approach. The effects of stroke modes, both pure and combined, are investigated and…
▽ More
An axisymmetric squirmer in a Bingham viscoplastic fluid is studied numerically to determine the effect of a yield stress environment on locomotion. The nonlinearity of the governing equations necessitates numerical methods, which is accomplished by solving a variable-viscosity Stokes equation with a Finite Element approach. The effects of stroke modes, both pure and combined, are investigated and it is found that for the treadmill or "neutral" mode, the swimmer in a yield stress fluid has a lower swimming velocity and uses more power. However, the efficiency of swimming reaches its maximum at a finite yield limit. In addition, for higher yield limits, higher stroke modes can increase the swimming velocity and hydrodynamic efficiency of the treadmill swimmer. The higher-order odd-numbered squirming modes, particularly the third stroke mode, can generate propulsion by themselves that increases in strength as the viscoplastic nonlinearity increases till a specific limit. These results are closely correlated with the confinement effects induced by the viscoplastic rigid surface surrounding the swimming body, showing that swimmers in viscoplastic environments, both biological and artificial, could potentially employ other non-standard swimming strategies to optimize their locomotion.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
Mode Competition in a Plunging Foil with an Active Flap: A Multi-Scale Modal Analysis Approach
Authors:
Tso-Kang Wang,
Kourosh Shoele
Abstract:
The flow-induced flutter has a significant role in aircraft stability, renewable energy extraction, animal locomotion, among many other applications. While being a ubiquitous phenomenon, the control of the flutter response has been primarily limited to simplified systems and, often, with the help of linear inviscid flow theories. In this paper, we numerically investigate how the plunging response…
▽ More
The flow-induced flutter has a significant role in aircraft stability, renewable energy extraction, animal locomotion, among many other applications. While being a ubiquitous phenomenon, the control of the flutter response has been primarily limited to simplified systems and, often, with the help of linear inviscid flow theories. In this paper, we numerically investigate how the plunging response of a foil can be regulated using an active flap to improve structural safety or enhance the energy extraction efficiency of the foil with a tightly coupled fluid-structure interaction algorithm. A broad range of foil and flap settings was tested and their flow dynamics have been investigated. A novel multi-scale modal analysis technique suitable for fluid-structure interaction systems successfully isolates the active flap-induced and the flow-induced modes. It is observed that the competition between these two modes dictates the plunging response of the foil. The active flap can modulate the leading edge vortex shedding with larger flap** amplitude and regulate the foil heaving motion. The ratio of the competing modal energy is proposed to evaluate the control efficacy of the morphing surface, and the onset of the lock-in is associated with the ratio approaching unity. It is shown that the morphing flap is a good candidate for active flow control.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Hybrid Wave/Current Energy Harvesting with a Flexible Piezoelectric Plate
Authors:
Kourosh Shoele
Abstract:
We investigate the dynamics and energy production capability of a flexible piezoelectric plate submerged close to the free surface and exposed to incident head gravity waves and current. A theoretical model is derived in which the flag and its wake are represented with a vortex line while the body of the fluid is considered to be inviscid. The model is employed to describe the hydrodynamic interac…
▽ More
We investigate the dynamics and energy production capability of a flexible piezoelectric plate submerged close to the free surface and exposed to incident head gravity waves and current. A theoretical model is derived in which the flag and its wake are represented with a vortex line while the body of the fluid is considered to be inviscid. The model is employed to describe the hydrodynamic interactions between a flexible plate, its wake, gravity incident waves and the current. The model reveals two distinct vibration states of a piezoelectric device corresponding to almost similar optimal energy production levels. The first is associated with the cantilever fluttering mode of the plate with limited dependency on the plate's flexibility across different Froude numbers and incoming wave frequencies. The other resembles the flow-induced flap** mode in more flexible plates, with the energy output showing a higher dependency on plate flexibility. The concurrent existence of these two energetic modes allows adjustment of the plate length to consistently achieve the maximum energy production level across different flow conditions. The role of the Froude number of the system's responses is explored and correlated to the appearance of gravity wave groups on the surface, each propagating with a different wavenumber. It is shown that a submergence depth of less than half of the body length is required to reach a high energetic condition in subcritical and critical flows. Finally, the optimal inductive and resistive values are related to proper matching between flow, mechanical and electrical timescales.
△ Less
Submitted 11 July, 2023; v1 submitted 21 January, 2022;
originally announced January 2022.
-
Formation of a strong negative wake behind a helical swimmer in a viscoelastic fluid
Authors:
S. Wu,
T. Solano,
K. Shoele,
H. Mohammadigoushki
Abstract:
We investigate the effects of helical swimmer shape (i.e., helical pitch angle and tail thickness) on swimming dynamics in a constant viscosity viscoelastic (Boger) fluid via a combination of particle tracking velocimetry, particle image velocimetry and 3D simulations of the FENE-P model. The 3D printed helical swimmer is actuated in a magnetic field using a custom-built rotating Helmholtz coil. O…
▽ More
We investigate the effects of helical swimmer shape (i.e., helical pitch angle and tail thickness) on swimming dynamics in a constant viscosity viscoelastic (Boger) fluid via a combination of particle tracking velocimetry, particle image velocimetry and 3D simulations of the FENE-P model. The 3D printed helical swimmer is actuated in a magnetic field using a custom-built rotating Helmholtz coil. Our results indicate that increasing the swimmer tail thickness and pitch angle enhances the normalized swimming speed (i.e., ratio of swimming speed in the Boger fluid to that of the Newtonian fluid). Strikingly, unlike the Newtonian fluid, the viscoelastic flow around the swimmer is characterized by formation of a front-back flow asymmetry that is characterized by a strong negative wake downstream of the swimmer. Evidently, the strength of the negative wake is inversely proportional to the normalized swimming speed. Three-dimensional simulations of the swimmer with FENE-P model with conditions that match those of experiments, confirm formation of a similar front-back flow asymmetry around the swimmer. Finally, by develo** an approximate force balance in the streamwise direction, we show that the contribution of polymer stresses in the interior region of the helix may provide a mechanism for swimming enhancement or diminution in the viscoelastic fluid.
△ Less
Submitted 30 November, 2021; v1 submitted 15 September, 2021;
originally announced September 2021.
-
Axisymmetric Squirmers in Stokes Fluid with Nonuniform Viscosity
Authors:
Patrick S. Eastham,
Kourosh Shoele
Abstract:
The ciliary locomotion and feeding of an axisymmetric micro-swimmer in a complex fluid whose viscosity depends on nutrient concentration are investigated numerically. The micro-swimmer is modeled as having spheroidal geometry, and ciliary beating is modeled by a slip velocity; i.e. a squirmer is adapted. Looking at the coupling between swimming and feeding of spheroidal squirmers, it is found that…
▽ More
The ciliary locomotion and feeding of an axisymmetric micro-swimmer in a complex fluid whose viscosity depends on nutrient concentration are investigated numerically. The micro-swimmer is modeled as having spheroidal geometry, and ciliary beating is modeled by a slip velocity; i.e. a squirmer is adapted. Looking at the coupling between swimming and feeding of spheroidal squirmers, it is found that swimming speed and feeding are most affected by a non-uniform viscosity environment when the ratio of advection-forces to diffusion-transport, characterized by the nondimensional Peclét number, is moderate ($\text{Pe}\approx 10$). These changes are correlated to significant increases in the pressure force on the surface of the squirmer. The swimming and feeding changes are found to be more significant in oblate spheroids than prolate spheroids. Most interestingly, nontrivial symmetric slip boundary conditions on the surface of the squirmer, which results in zero net motion in a constant viscosity fluid, can yield non-zero propulsion when paired with asymmetric nutrient boundary conditions. The fact that symmetric fluid boundary conditions can result in asymmetric propulsion has implications for the design of artificial micro-swimmers and other low-$\text{Re}$ squirmers in complex fluids.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.