-
A Post-Training Approach for Mitigating Overfitting in Quantum Convolutional Neural Networks
Authors:
Aakash Ravindra Shinde,
Charu Jain,
Amir Kalev
Abstract:
Quantum convolutional neural network (QCNN), an early application for quantum computers in the NISQ era, has been consistently proven successful as a machine learning (ML) algorithm for several tasks with significant accuracy. Derived from its classical counterpart, QCNN is prone to overfitting. Overfitting is a typical shortcoming of ML models that are trained too closely to the availed training…
▽ More
Quantum convolutional neural network (QCNN), an early application for quantum computers in the NISQ era, has been consistently proven successful as a machine learning (ML) algorithm for several tasks with significant accuracy. Derived from its classical counterpart, QCNN is prone to overfitting. Overfitting is a typical shortcoming of ML models that are trained too closely to the availed training dataset and perform relatively poorly on unseen datasets for a similar problem. In this work we study post-training approaches for mitigating overfitting in QCNNs. We find that a straightforward adaptation of a classical post-training method, known as neuron dropout, to the quantum setting leads to a significant and undesirable consequence: a substantial decrease in success probability of the QCNN. We argue that this effect exposes the crucial role of entanglement in QCNNs and the vulnerability of QCNNs to entanglement loss. Hence, we propose a parameter adaptation method as an alternative method. Our method is computationally efficient and is found to successfully handle overfitting in the test cases.
△ Less
Submitted 3 March, 2024; v1 submitted 4 September, 2023;
originally announced September 2023.
-
Meta-Analysis of Transfer Learning for Segmentation of Brain Lesions
Authors:
Sovesh Mohapatra,
Advait Gosai,
Anant Shinde,
Aleksei Rutkovskii,
Sirisha Nouduri,
Gottfried Schlaug
Abstract:
A major challenge in stroke research and stroke recovery predictions is the determination of a stroke lesion's extent and its impact on relevant brain systems. Manual segmentation of stroke lesions from 3D magnetic resonance (MR) imaging volumes, the current gold standard, is not only very time-consuming, but its accuracy highly depends on the operator's experience. As a result, there is a need fo…
▽ More
A major challenge in stroke research and stroke recovery predictions is the determination of a stroke lesion's extent and its impact on relevant brain systems. Manual segmentation of stroke lesions from 3D magnetic resonance (MR) imaging volumes, the current gold standard, is not only very time-consuming, but its accuracy highly depends on the operator's experience. As a result, there is a need for a fully automated segmentation method that can efficiently and objectively measure lesion extent and the impact of each lesion to predict impairment and recovery potential which might be beneficial for clinical, translational, and research settings. We have implemented and tested a fully automatic method for stroke lesion segmentation which was developed using eight different 2D-model architectures trained via transfer learning (TL) and mixed data approaches. Additionally, the final prediction was made using a novel ensemble method involving stacking and agreement window. Our novel method was evaluated in a novel in-house dataset containing 22 T1w brain MR images, which were challenging in various perspectives, but mostly because they included T1w MR images from the subacute (which typically less well defined T1 lesions) and chronic stroke phase (which typically means well defined T1-lesions). Cross-validation results indicate that our new method can efficiently and automatically segment lesions fast and with high accuracy compared to ground truth. In addition to segmentation, we provide lesion volume and weighted lesion load of relevant brain systems based on the lesions' overlap with a canonical structural motor system that stretches from the cortical motor region to the lowest end of the brain stem.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Alignment of Stakeholder Expectations about User Involvement in Agile Software Development
Authors:
Jim Buchan,
Muneera Bano,
Didar Zowghi,
Stephen MacDonell,
Amrita Shinde
Abstract:
Context: User involvement is generally considered to contributing to user satisfaction and project success and is central to Agile software development. In theory, the expectations about user involvement, such as the PO's, are quite demanding in this Agile way of working. But what are the expectations seen in practice, and are the expectations of user involvement aligned among the development team…
▽ More
Context: User involvement is generally considered to contributing to user satisfaction and project success and is central to Agile software development. In theory, the expectations about user involvement, such as the PO's, are quite demanding in this Agile way of working. But what are the expectations seen in practice, and are the expectations of user involvement aligned among the development team and users? Any misalignment could contribute to conflict and miscommunication among stakeholders that may result in ineffective user involvement. Objective: Our aim is to compare and contrast the expectations of two stakeholder groups (software development team, and software users) about user involvement in order to understand the expectations and assess their alignment. Method: We have conducted an exploratory case study of expectations about user involvement in an Agile software development. Qualitative data was collected through interviews to design a novel method for the assessing the alignment of expectations about user involvement by applying Repertory Grids (RG). Results: By aggregating the results from the interviews and RGs, varying degrees of expectation alignments were observed between the development team and user representatives. Conclusion: Alignment of expectations can be assessed in practice using the proposed RG instrument and can reveal misalignment between user roles and activities they participate in Agile software development projects. Although we used RG instrument retrospectively in this study, we posit that it could also be applied from the start of a project, or proactively as a diagnostic tool throughout a project to assess and ensure that expectations are aligned.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Neutron-Irradiation Induced Magnetization and Persistent Defects at High Temperatures in Graphite
Authors:
Ranjan Mittal,
Mayanak K. Gupta,
Sanjay K. Mishra,
Sourabh Wajhal,
Peram Delli Babu,
Baltej Singh,
Anil Bhimrao Shinde,
Poluri Siva Rama Krishna,
Rakesh K. Singhal,
Rakesh Ranjan,
Samrath Lal Chaplot
Abstract:
Structural as well as magnetization studies have been carried out on graphite samples irradiated by neutrons over 50 years in the CIRUS research reactor at Trombay. Neutron diffraction studies reveal that the defects in irradiated graphite samples are not well annealed and remain significant up to high temperatures much greater than 653 K where the Wigner energy is completely released. We infer th…
▽ More
Structural as well as magnetization studies have been carried out on graphite samples irradiated by neutrons over 50 years in the CIRUS research reactor at Trombay. Neutron diffraction studies reveal that the defects in irradiated graphite samples are not well annealed and remain significant up to high temperatures much greater than 653 K where the Wigner energy is completely released. We infer that the remnant defects may be intralayer Frenkel defects, which do not store large energy, unlike the interlayer Frenkel defects that store the Wigner energy. Magnetization studies on the irradiated graphite show ferromagnetic behavior even at 300 K and a large additional paramagnetic contribution at 5 K. Ab-initio calculations based on the spin-polarized density-functional theory show that the magnetism in defected graphite is essentially confined on to a single 2-coordinated carbon atom that is located around a vacancy in the hexagonal layer.
△ Less
Submitted 10 August, 2020;
originally announced August 2020.
-
Active Deception using Factored Interactive POMDPs to Recognize Cyber Attacker's Intent
Authors:
Aditya Shinde,
Prashant Doshi,
Omid Setayeshfar
Abstract:
This paper presents an intelligent and adaptive agent that employs deception to recognize a cyber adversary's intent. Unlike previous approaches to cyber deception, which mainly focus on delaying or confusing the attackers, we focus on engaging with them to learn their intent. We model cyber deception as a sequential decision-making problem in a two-agent context. We introduce factored finitely ne…
▽ More
This paper presents an intelligent and adaptive agent that employs deception to recognize a cyber adversary's intent. Unlike previous approaches to cyber deception, which mainly focus on delaying or confusing the attackers, we focus on engaging with them to learn their intent. We model cyber deception as a sequential decision-making problem in a two-agent context. We introduce factored finitely nested interactive POMDPs (I-POMDPx) and use this framework to model the problem with multiple attacker types. Our approach models cyber attacks on a single honeypot host across multiple phases from the attacker's initial entry to reaching its adversarial objective. The defending I-POMDPx-based agent uses decoys to engage with the attacker at multiple phases to form increasingly accurate predictions of the attacker's behavior and intent. The use of I-POMDPs also enables us to model the adversary's mental state and investigate how deception affects their beliefs. Our experiments in both simulation and on a real host show that the I-POMDPx-based agent performs significantly better at intent recognition than commonly used deception strategies on honeypots.
△ Less
Submitted 18 July, 2020;
originally announced July 2020.
-
Defect topology and annihilation by cooperative cascading movement of atoms in highly neutron irradiated graphite
Authors:
Ranjan Mittal,
Mayanak K. Gupta,
Sanjay K. Mishra,
Sourabh Wajhal,
Himanshu K. Poswal,
Baltej Singh,
Anil Bhimrao Shinde,
Poluri Siva Rama Krishna,
Peram Delli Babu,
Ratikant Mishra,
Pulya Umamaheswara Sastry,
Rakesh Ranjan,
Samrath Lal Chaplot
Abstract:
Graphite has been used as neutron moderator or reflector in many nuclear reactors. The irradiation of graphite in a nuclear reactor results in a complex population of defects. Heating of the irradiated graphite at high temperatures results in annihilation of the defects with release of an unusually large energy, called the Wigner energy. From various experiments on highly irradiated graphite sampl…
▽ More
Graphite has been used as neutron moderator or reflector in many nuclear reactors. The irradiation of graphite in a nuclear reactor results in a complex population of defects. Heating of the irradiated graphite at high temperatures results in annihilation of the defects with release of an unusually large energy, called the Wigner energy. From various experiments on highly irradiated graphite samples from CIRUS reactor at Trombay and ab-initio simulations, we have for the first time identified various 2-, 3- and 4-coordinated topological structures in defected graphite, and provided microscopic mechanism of defect annihilation on heating and release of the Wigner energy. The annihilation process involves cascading cooperative movement of atoms in two steps involving an intermediate structure. Our work provides new insights in understanding of the defect topologies and annihilation in graphite which is of considerable importance to wider areas of graphitic materials including graphene and carbon nanotubes.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Revised crystal structure and electronic properties of high dielectric Ba(Fe$_{1/2}$Nb$_{1/2}$)O$_{3}$ ceramics
Authors:
Rajyavardhan Ray,
A. K. Himanshu,
Golak K. Mandal,
Uday Kumar,
S. N. Jha,
N Patra,
D. Bhattacharya,
A. B. Shinde,
Manuel Richter,
P. S. R. Krishna
Abstract:
Ba(Fe$_{1/2}$Nb$_{1/2}$)O$_3$ (BFN) ceramics are considered to be promising for technological applications owing to their high dielectric constant over a wide range of temperatures. However, there exists considerable discrepancy over the structural details. We address this discrepancy through a combined x-ray diffraction at room temperature and neutron powder diffraction measurements in the range…
▽ More
Ba(Fe$_{1/2}$Nb$_{1/2}$)O$_3$ (BFN) ceramics are considered to be promising for technological applications owing to their high dielectric constant over a wide range of temperatures. However, there exists considerable discrepancy over the structural details. We address this discrepancy through a combined x-ray diffraction at room temperature and neutron powder diffraction measurements in the range from 5K up to room temperature, supplemented by a comparative analysis of the earlier reported structures. Our study reveals a cubic structure with space group Pm$\bar{3}$m at all measured temperatures. Further, the x-ray near edge structure and the extended x-ray absorption fine structure studies on the local environment of the Fe ions is consistent with the cubic symmetry. An appropriate value of $U$ for DFT+$U$ calculations is obtained by comparison with x-ray absorption spectroscopy, which agrees well with the earlier reported electronic properties.
△ Less
Submitted 16 December, 2021; v1 submitted 1 July, 2019;
originally announced July 2019.
-
The X-ray photoemission and Co K -Edge X-ray absorption of Ba2CoWO6
Authors:
Dhiraj Jha,
A. K. Himanshu,
Bijay K Singh,
Dinesh Shukla,
Uday Kuma,
Ravi Kumar,
Kaustava Bhattacharyya,
A. B. Shinde,
P. S. R. Krishna,
Alo Dutta,
T. P. Sinha,
Rajyavardhan Ray
Abstract:
The structural, electronic and optical properties of cubic double perovskite BaCoWO6 have been studied. Neutron powder diffraction data is collected on this sample from 6K to 300K. The crystal structure is face centered cubic, space group being Fm3m (No. 225). We did not find evidence for long range magnetic ordering in this system in this temperature range. The band-gap is estimated using Uv-vis…
▽ More
The structural, electronic and optical properties of cubic double perovskite BaCoWO6 have been studied. Neutron powder diffraction data is collected on this sample from 6K to 300K. The crystal structure is face centered cubic, space group being Fm3m (No. 225). We did not find evidence for long range magnetic ordering in this system in this temperature range. The band-gap is estimated using Uv-vis spectroscopy. The Co-K edge X-ray absorption (XAFS) spectra of Ba2CoWO6 was analysed together with those Co-foil, which was used as reference compounds. X-ray photoemission spectroscopy (XPS), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) studies give the insight of the electronic and structural information on the Co local environment for Ba2CoWO6.
△ Less
Submitted 4 July, 2019; v1 submitted 30 June, 2019;
originally announced July 2019.
-
A search for technosignatures from 14 planetary systems in the Kepler field with the Green Bank Telescope at 1.15-1.73 GHz
Authors:
Jean-Luc Margot,
Adam H. Greenberg,
Pavlo Pinchuk,
Akshay Shinde,
Yashaswi Alladi,
Srinivas Prasad MN,
M. Oliver Bowman,
Callum Fisher,
Szilard Gyalay,
Willow McKibbin,
Brittany Miles,
Donald Nguyen,
Conor Power,
Namrata Ramani,
Rashmi Raviprasad,
Jesse Santana,
Ryan S. Lynch
Abstract:
Analysis of Kepler mission data suggests that the Milky Way includes billions of Earth-like planets in the habitable zone of their host star. Current technology enables the detection of technosignatures emitted from a large fraction of the Galaxy. We describe a search for technosignatures that is sensitive to Arecibo-class transmitters located within ~420 ly of Earth and transmitters that are 1000…
▽ More
Analysis of Kepler mission data suggests that the Milky Way includes billions of Earth-like planets in the habitable zone of their host star. Current technology enables the detection of technosignatures emitted from a large fraction of the Galaxy. We describe a search for technosignatures that is sensitive to Arecibo-class transmitters located within ~420 ly of Earth and transmitters that are 1000 times more effective than Arecibo within ~13 000 ly of Earth. Our observations focused on 14 planetary systems in the Kepler field and used the L-band receiver (1.15-1.73 GHz) of the 100 m diameter Green Bank Telescope. Each source was observed for a total integration time of 5 minutes. We obtained power spectra at a frequency resolution of 3 Hz and examined narrowband signals with Doppler drift rates between +/-9 Hz/s. We flagged any detection with a signal-to-noise ratio in excess of 10 as a candidate signal and identified approximately 850 000 candidates. Most (99%) of these candidate signals were automatically classified as human-generated radio-frequency interference (RFI). A large fraction (>99%) of the remaining candidate signals were also flagged as anthropogenic RFI because they have frequencies that overlap those used by global navigation satellite systems, satellite downlinks, or other interferers detected in heavily polluted regions of the spectrum. All 19 remaining candidate signals were scrutinized and none were attributable to an extraterrestrial source.
△ Less
Submitted 30 March, 2018; v1 submitted 4 February, 2018;
originally announced February 2018.
-
High Temperature Phase Stability in Li0.12Na0.88NbO3: A Combined powder X-Ray and Neutron Diffraction Study
Authors:
S. K. Mishra,
P. S. R. Krishna,
A. B. Shinde,
V. B. Jayakrishnan,
R. Mittal,
P. U. Sastry,
S. L. Chaplot
Abstract:
Lithium doped sodium niobate is an ecofriendly piezoelectric material that exhibits a variety of structural phase transitions with composition and temperature. We have investigated the phase stabilities of an important composition Li0.12Na0.88NbO3 (LNN12) using a combination of powder x-ray and neutron diffraction techniques in the temperature range 300 - 1100 K. Detailed Rietveld analyses of ther…
▽ More
Lithium doped sodium niobate is an ecofriendly piezoelectric material that exhibits a variety of structural phase transitions with composition and temperature. We have investigated the phase stabilities of an important composition Li0.12Na0.88NbO3 (LNN12) using a combination of powder x-ray and neutron diffraction techniques in the temperature range 300 - 1100 K. Detailed Rietveld analyses of thermo-diffractograms show a variety of structural phase transitions ranging from non-polar antiferrodistortive to ferroelectric in nature. In the temperature range of 525 K to 675 K, unambiguous experimental evidence is shown for phase coexistence of orthorhombic paraelectric O1 phase (space group Cmcm) and orthorhombic ferroelectric O2 phase (space group Pmc21). The bp primitive lattice parameter of the ferroelectric orthorhombic phase (O2 phase) decreases, while the ap and cp primitive lattice parameters show normal increase with increase in temperature. Above 675 K, in the O1 phase, all lattice parameters come close to each other and increase continuously with increase of temperature, and around 925 K, ap parameter approaches bp parameter and thus the sample undergoes an orthorhombic to tetragonal phase transition. Further as temperature increases, the cp lattice parameter decreases, and finally approaches to ap parameter, and the sample transform into the cubic phase. The continuous change in the lattice parameters reveals that the successive phase transformations from orthorhombic O1 to high temperature tetragonal phase and finally to the cubic phase are not of a strong first order type in nature. We argue that application of chemical pressure as a result of Li substitution in NaNbO3 matrix, favours the freezing of zone centre phonons over the zone boundary phonons that are known to freeze in pure NaNbO3 as function of temperature.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Understanding Formulation of Social Capital in Online Social Network Sites (SNS)
Authors:
S. S. Phulari,
S. D. Khamitkar,
N. K. Deshmukh,
P. U. Bhalchandra,
S. N. Lokhande,
A. R. Shinde
Abstract:
Online communities are the gatherings of like-minded people, brought together in cyberspace by shared interests. The shared interest has hidden social capital aspects and can be of bridging or bonding type. Creating such communities is not a big challenge but sustaining member's participation is. This study examines the formation and maintenance of social capital in social network sites. In addi…
▽ More
Online communities are the gatherings of like-minded people, brought together in cyberspace by shared interests. The shared interest has hidden social capital aspects and can be of bridging or bonding type. Creating such communities is not a big challenge but sustaining member's participation is. This study examines the formation and maintenance of social capital in social network sites. In addition to assessing bonding and bridging social capital, we explore a dimension of social capital that assesses one's ability to stay connected with members of a previously inhabited community, which we call maintained social capital. Such dimension is enacted here in terms of Hypothesis.
△ Less
Submitted 5 February, 2010;
originally announced February 2010.
-
Anomalous Absorption in Cyclic C$_3$H Radical
Authors:
Suresh Chandra,
S. A. Shinde
Abstract:
Yamamoto et al. (1987) reported the first detection of $c$-C$_3$H radical in {TMC-1} through its transition $2_{1 2} \to 1_{1 1}$ at 91.5 GHz. Mangum and Wootten (1990) detected $c$-C$_3$H through the transition $1_{1 0} \to 1_{1 1}$ at 14.8 GHz in 12 additional galactic objects. The column density of $c$-C$_3$H in the objects was estimated to be about one order of magnitude lower than that of t…
▽ More
Yamamoto et al. (1987) reported the first detection of $c$-C$_3$H radical in {TMC-1} through its transition $2_{1 2} \to 1_{1 1}$ at 91.5 GHz. Mangum and Wootten (1990) detected $c$-C$_3$H through the transition $1_{1 0} \to 1_{1 1}$ at 14.8 GHz in 12 additional galactic objects. The column density of $c$-C$_3$H in the objects was estimated to be about one order of magnitude lower than that of the C$_3$H$_2$ which is ubiquitous in the galactic objects. The most probable production mechanism of both the C$_3$H and C$_3$H$_2$ in dark clouds is a common dissociation reaction of C$_3$H$_3^+$ ion (Adams & Smith, 1987). Although the $c$-C$_3$H is 0.8 eV less stable than its isomer $l$-C$_3$H, finding of comparable column densities of both the isomers in {TMC-1} supports the idea of comparable formation of both the $c$-C$_3$H and $l$-C$_3$H in the cosmic objects. Existence of a metaisomer in interstellar condition is a well known phenomenon in astronomy.
We propose that $c$-C$_3$H may be identified through the transition $3_{3 1} \to 3_{3 0}$ at 3.4 GHz in absorption against the cosmic 2.7 K background in dense cosmic objects when no strong source is present in the background. When there is some strong source in the background of the object, peak of the absorption line decreases with the increase of the strength of the background source. However, at low densities, the intensity is found to increase. Hence, in low density regions, a background source can help in detection of the line. This absorption line may play an important role for identification of $c$-C$_3$H in a large number of cosmic objects. Similar absorption features are found for $c$-C$_3$D radical also.
△ Less
Submitted 19 May, 2003;
originally announced May 2003.
